| Age | Commit message (Collapse) | Author |
|---|
|
Merge cpufreq fixes for 6.10-rc3:
- Fix a recently introduced unchecked HWP MSR access in the
intel_pstate driver (Srinivas Pandruvada).
- Add missing conversion from MHz to KHz to amd_pstate_set_boost()
to address sysfs inteface inconsistency (Dhananjay Ugwekar).
- Get rid of an excess global header file used by the amd-pstate
cpufreq driver (Arnd Bergmann).
* pm-cpufreq:
cpufreq: intel_pstate: Fix unchecked HWP MSR access
cpufreq: amd-pstate: Fix the inconsistency in max frequency units
cpufreq: amd-pstate: remove global header file
|
|
To fix the warning about unused value,
remove the use_static and use the parameter is_static directly.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
Refactor code and move fpo_in_use into stream_status to avoid
unexpected changes to previous dc_state (i.e., current_state).
Since stream pointers are shared between current and new dc_states,
updating parameters of one stream will update the other as well
which causes unexpected behaviors (i.e., checking that fpo_in_use
isn't set in previous state and set in the new state is invalid).
To avoid incorrect updates to current_state, move the fpo_in_use flag
into dc_stream_status since stream_status is owned by dc and are not
shared between different dc_states.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
Today for MED update type we do not call update clocks. However, for FPO
the assumption is that update clocks should be called to disable P-State
switch before any HW programming since FPO in FW and driver are not
synchronized. This causes an issue where on a MED update, an FPO P-State
switch could be taking place, then driver forces P-State disallow in the below
code and prevents FPO from completing the sequence. In this case we add a check
to avoid re-programming (and thus re-setting) the P-State force register by
only reprogramming if the pipe was not previously Subvp or FPO. The assumption
is that the P-State force register should be programmed correctly the first
time SubVP / FPO was enabled, so there's no need to update / reset it if the
pipe config has never exited SubVP / FPO.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
Sometimes read DPCD return fail while result not retrieved yet. Add
retries mechanism in Replay handle hpd irq to get real result.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Joan Lee <joan.lee@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When an eDP with high clock states is going into s0i3, stream_count is
0. This causes DML to not update the clks to the lowest state and
blocking us to enter s0i3 since eDP is out of vmin.
[How]
When stream_count is 0, set all the clocks to the lowest state.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A wavefront may deallocate its VGPRs at the end of a program while
waiting for memory transactions to complete. If it subsequently
receives a context save exception it will be unable to save,
since this requires VGPRs. In this case the trap handler should
terminate the wavefront.
Fixes intermittent VM faults under context switching load.
V2: Use S_ENDPGM instead of S_ENDPGM_SAVED for performance counters
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Page table definition increased up to 2MB.
[How]
Define new use case of page table for VA.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Currently there's an issue on DCN401 that prevents oled eDP panels from
being lit up that is still under investigation. To unblock dev work
while investigating, we can work around the issue by skipping toggling
the enablement of the backlight.
[How]
- new debug bit that will skip touching backlight enable DPCD for oled
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Add parameters for set_abm_event to enable varibright scaling.
VariBright Scaling is a feature to refer to system states like
1. Power mode
2. Battery Life percent
3. FullScreen video
4. Backlight slider
to adjust variBright strength to get low power or user experience.
[How]
Add parameters of set_abm_event for VB Scaling
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Chun-LiangChang <chuchang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The values calculated in optc1_get_otg_active_size are assigned to the
wrong output parameters, vertical blank is being used for horizontal size
and vice versa. This results in DPG test pattern looking wrong during
hardware init, as the DPG dimensions get assigned from this output, and
potentially other issues.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
When updating clocks via SMU, DAL needs to wait for requests to be fulfilled
before proceeding.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
In order to support glitchless display clock ramping for virtual stream,
we must
turn on symclk for stream encoder. The code will power on phy and enable
symclk
for dio encoder during virtual stream dpms sequence.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Vbios & Driver have difference pixel rate div policy.
When enabling fast boot & performing blank & unblank w/o timing setting,
pixel clock & pixel rate dividor are not match.
It would cause too high pixel reate and eDP would be black screen.
[How]
We would keep pixel rate div setting by Vbios until next timing setting.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: yi-lchen <yi-lchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 6670142d25f3cc3166f2a6c8454acd310bf2776a.
Pierre-Eric reported problems with this on his navi33. Revert
for now until we understand what is going wrong.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Pierre-eric.Pelloux-prayer@amd.com
|
|
Let's test that we can have shared zeropages in our process as long as
storage keys are not getting used, that shared zeropages are properly
unshared (replaced by anonymous pages) once storage keys are enabled,
and that no new shared zeropages are populated after storage keys
were enabled.
We require the new pagemap interface to detect the shared zeropage.
On an old kernel (zeropages always disabled):
# ./s390x/shared_zeropage_test
TAP version 13
1..3
not ok 1 Shared zeropages should be enabled
ok 2 Shared zeropage should be gone
ok 3 Shared zeropages should be disabled
# Totals: pass:2 fail:1 xfail:0 xpass:0 skip:0 error:0
On a fixed kernel:
# ./s390x/shared_zeropage_test
TAP version 13
1..3
ok 1 Shared zeropages should be enabled
ok 2 Shared zeropage should be gone
ok 3 Shared zeropages should be disabled
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Testing of UFFDIO_ZEROPAGE can be added later.
[ agordeev: Fixed checkpatch complaint, added ucall_common.h include ]
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20240412084329.30315-1-david@redhat.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The virtual memory information stored in os_info area is
required for creation of the kernel image PT_LOAD program
header for kernels since commit a2ec5bec56dd ("s390/mm:
uncouple physical vs virtual address spaces").
By contrast, if such information in os_info is absent the
PT_LOAD program header should not be created.
Currently the proper PT_LOAD program header is created for
kernels that contain the virtual memory information, but
for kernels without one an invalid header of zero size is
created. That in turn leads to stand-alone dump failures.
Use OS_INFO_KASLR_OFFSET variable to check whether os_info
is present or not (same as crash and makedumpfile tools do)
and based on that create or do not create the kernel image
PT_LOAD program header.
Fixes: f4cac27dc0d6 ("s390/crash: Use old os_info to create PT_LOAD headers")
Tested-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Add some additional registers.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
define new gfx12 uapi flags
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The varible uncached set false, the condition uncached cannot be true.
So remove the dead code, mapping flags will set the flag AMDGPU_VM_MTYPE_UC in else.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch changes the implementation of AMDGPU_PTE_MTYPE_NV10,
clear the bits before setting the new one.
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: longlyao <Longlong.Yao@amd.com>
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch to disable lane0 L1TLB and enable lane1 L1TLB.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch to configure mmhub3.3 SAW registers
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Flexible arrays used [1] instead of []. Replace the former with the latter
to resolve multiple UBSAN warnings observed on boot with a BONAIRE card.
In addition, use the __counted_by attribute where possible to hint the
length of the arrays to the compiler and any sanitizers.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are a few spelling mistakes in dml2_printf messages. Fix them.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix comments and error messages to rightly represent
the information.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rename the variable ip_dump_cp_queues to ip_dump_compute_queue
as it represent compute queues.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add gfx9 support of CP queue registers for all queues
to be used by devcoredump.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support of gfx9 ipdump print so devcoredump
could trigger it to dump the captured registers
in devcoredump.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add general registers of gfx9 in ipdump for
devcoredump support.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit fixes a type mismatch in the amdgpu_gfx_kiq_init_ring
function triggered by the snprintf function expecting unsigned char
arguments due to the '%hhu' format specifier, but receiving int and u32
arguments.
The issue occurred because the arguments xcc_id, ring->me, ring->pipe,
and ring->queue were of type int and u32, not unsigned char. This led to
a type mismatch when these arguments were passed to snprintf.
To resolve this, the snprintf line was modified to cast these arguments
to unsigned char. This ensures that the arguments are of the correct
type for the '%hhu' format specifier and resolves the warning.
Fixes the below:
>> drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:333:4: warning: format
>> specifies type 'unsigned char' but the argument has type 'int'
>> [-Wformat]
xcc_id, ring->me, ring->pipe, ring->queue);
^~~~~~
>> drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:333:12: warning: format
>> specifies type 'unsigned char' but the argument has type 'u32' (aka
>> 'unsigned int') [-Wformat]
xcc_id, ring->me, ring->pipe, ring->queue);
^~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:333:22: warning: format specifies type 'unsigned char' but the argument has type 'u32' (aka 'unsigned int') [-Wformat]
xcc_id, ring->me, ring->pipe, ring->queue);
^~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:333:34: warning: format specifies type 'unsigned char' but the argument has type 'u32' (aka 'unsigned int') [-Wformat]
xcc_id, ring->me, ring->pipe, ring->queue);
^~~~~~~~~~~
4 warnings generated.
Fixes: 0ea554455542 ("drm/amdgpu: Fix snprintf usage in amdgpu_gfx_kiq_init_ring")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405250446.XeaWe66u-lkp@intel.com/
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Potentially overflowing expression mall_size_per_umc * adev->gmc.num_umc with type unsigned int (32 bits, unsigned)
is evaluated using 32-bit arithmetic,and then used in a context that expects an expression of type u64 (64 bits, unsigned).
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
AMDGPU_RAS_GPU_ERR_BOOT_STATUS field is no longer valid.
The polling sequence is also simplifed according to
the latest firmware change.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Work for __counted_by on generic pointers in structures (not just
flexible array members) has started landing in Clang 19 (current tip of
tree). During the development of this feature, a restriction was added
to __counted_by to prevent the flexible array member's element type from
including a flexible array member itself such as:
struct foo {
int count;
char buf[];
};
struct bar {
int count;
struct foo data[] __counted_by(count);
};
because the size of data cannot be calculated with the standard array
size formula:
sizeof(struct foo) * count
This restriction was downgraded to a warning but due to CONFIG_WERROR,
it can still break the build. The application of __counted_by on the
states member of 'struct _StateArray' triggers this restriction,
resulting in:
drivers/gpu/drm/radeon/pptable.h:442:5: error: 'counted_by' should not be applied to an array with element of unknown size because 'ATOM_PPLIB_STATE_V2' (aka 'struct _ATOM_PPLIB_STATE_V2') is a struct type with a flexible array member. This will be an error in a future compiler version [-Werror,-Wbounds-safety-counted-by-elt-type-unknown-size]
442 | ATOM_PPLIB_STATE_V2 states[] __counted_by(ucNumEntries);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Remove this use of __counted_by to fix the warning/error. However,
rather than remove it altogether, leave it commented, as it may be
possible to support this in future compiler releases.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2028
Fixes: efade6fe50e7 ("drm/radeon: silence UBSAN warning (v3)")
Signed-off-by: Bill Wendling <morbo@google.com>
Co-developed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This fixes HDP flushes on systems with non-4K pages.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Merge ACPI EC driver fixes, an ACPI APEI fix and PNP fixes for
6.10-rc3:
- Fix error handling during EC operation region accesses in the ACPI EC
driver (Armin Wolf).
- Fix a memory leak in the APEI error injection driver introduced
during its converion to a platform driver (Dan Williams).
- Fix build failures related to the dev_is_pnp() macro by redefining it
as a proper function and exporting it to modules as appropriate and
unexport pnp_bus_type which need not be exported any more (Andy
Shevchenko).
* acpi-ec:
ACPI: EC: Avoid returning AE_OK on errors in address space handler
ACPI: EC: Abort address space access upon error
* acpi-apei:
ACPI: APEI: EINJ: Fix einj_dev release leak
* pnp:
PNP: Hide pnp_bus_type from the non-PNP code
PNP: Make dev_is_pnp() to be a function and export it for modules
|
|
categories
Currently when one enables driver debugging dmesg gets spammed, at I
suspect vblank rate, with messages like:
[drm:amdgpu_dm_atomic_check [amdgpu]] MPO enablement requested on crtc:[00000000f073c3bb]
Fix if by converting some logging from deprecated and incorrect
DRM_DEBUG_DRIVER to drm_dbg_atomic. Plus some localized drive-by changes
to drm_dbg_kms.
By no means an exhaustive conversion but at least it allows turning on
driver debug selectively.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add estimate of how much vram we need to reserve for RAS
when caculating the total available vram.
v2: apply the change to MP0 v13_0_2 and v13_0_14
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
And also make sure the value of msg[1].len should be in the range of u16.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix LDS size interpretation: 512 bytes (>= gfx12) vs 256 (< gfx12).
Ensure STATE_PRIV.BARRIER_COMPLETE cannot change after reading or
before writing. Other waves in the threadgroup may cause this field
to assert if they complete the barrier.
Do not overwrite EXCP_FLAG_PRIV.{SAVE_CONTEXT,HOST_TRAP} when
restoring this register. Both of these fields can assert while the
wavefront is running the trap handler.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We have messages when the VCN fails to initialize and
there is no need to report on success.
Also PSP loading FWs is the default for production.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sonny Jiang <sonjiang@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch changes the implementation of AMDGPU_PTE_MTYPE_GFX12,
clear the bits before setting the new one.
This fixed the potential issue that GFX12 setting memory to NC.
v2: Clear mtype field before setting the new one (Alex)
v3: Fix typo (Felix)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: longlyao <Longlong.Yao@amd.com>
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
in bch2_move_data_btree, we might start with the trans unlocked from a
previous loop iteration - we need a trans_begin() before iter_init().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes an issue where setting a device to durability=0 after it's
been used makes it impossible to remove.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Ingo reported that he was seeing these when hitting Control+C during a
perf tools build:
Makefile.perf:1149: *** Missing bpftool input for generating vmlinux.h. Stop.
The failure happens when you don't have vmlinux.h or vmlinux with BTF.
ifeq ($(VMLINUX_H),)
ifeq ($(VMLINUX_BTF),)
$(error Missing bpftool input for generating vmlinux.h)
endif
endif
VMLINUX_BTF can be empty if you didn't build a kernel or it doesn't have
a BTF section and the current kernel also has no BTF. This is totally
ok.
But VMLINUX_H should be set to the minimal version in the source tree
(unless you overwrite it manually) when you don't pass GEN_VMLINUX_H=1
(which requires VMLINUX_BTF should not be empty). The problem is that
it's defined in Makefile.config which is not included for `make clean`.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: http://lore.kernel.org/lkml/CAM9d7ch5HTr+k+_GpbMrX0HUo5BZ11byh1xq0Two7B7RQACuNw@mail.gmail.com
Link: http://lore.kernel.org/lkml/ZjssGrj+abyC6mYP@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This reverts commit 7d1405c71df21f6c394b8a885aa8a133f749fa22.
This causes segfaults in some cases, as reported by Milian:
```
sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e
raw_syscalls:sys_enter ls
...
[ perf record: Woken up 3 times to write data ]
malloc(): invalid next size (unsorted)
Aborted
```
Backtrace with GDB + debuginfod:
```
malloc(): invalid next size (unsorted)
Thread 1 "perf" received signal SIGABRT, Aborted.
__pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6,
no_tid=no_tid@entry=0) at pthread_kill.c:44
Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c
44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO
(ret) : 0;
(gdb) bt
#0 __pthread_kill_implementation (threadid=<optimized out>,
signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44
#1 0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>,
signo=6) at pthread_kill.c:78
#2 0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/
raise.c:26
#3 0x00007ffff6e384c3 in __GI_abort () at abort.c:79
#4 0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea
"%s\n") at ../sysdeps/posix/libc_fatal.c:132
#5 0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850
"malloc(): invalid next size (unsorted)") at malloc.c:5772
#6 0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0
<main_arena>, bytes=bytes@entry=368) at malloc.c:4081
#7 0x00007ffff6eb877e in __libc_calloc (n=<optimized out>,
elem_size=<optimized out>) at malloc.c:3754
#8 0x000055555569bdb6 in perf_session.do_write_header ()
#9 0x00005555555a373a in __cmd_record.constprop.0 ()
#10 0x00005555555a6846 in cmd_record ()
#11 0x000055555564db7f in run_builtin ()
#12 0x000055555558ed77 in main ()
```
Valgrind memcheck:
```
==45136== Invalid write of size 8
==45136== at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf)
==45136== by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf)
==45136== by 0x15A845: cmd_record (in /usr/bin/perf)
==45136== by 0x201B7E: run_builtin (in /usr/bin/perf)
==45136== by 0x142D76: main (in /usr/bin/perf)
==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd
==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675)
==45136== by 0x3574AB: zalloc (in /usr/bin/perf)
==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf)
==45136== by 0x15A845: cmd_record (in /usr/bin/perf)
==45136== by 0x201B7E: run_builtin (in /usr/bin/perf)
==45136== by 0x142D76: main (in /usr/bin/perf)
==45136==
==45136== Syscall param write(buf) points to unaddressable byte(s)
==45136== at 0x575953D: __libc_write (write.c:26)
==45136== by 0x575953D: write (write.c:24)
==45136== by 0x35761F: ion (in /usr/bin/perf)
==45136== by 0x357778: writen (in /usr/bin/perf)
==45136== by 0x1548F7: record__write (in /usr/bin/perf)
==45136== by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf)
==45136== by 0x15A845: cmd_record (in /usr/bin/perf)
==45136== by 0x201B7E: run_builtin (in /usr/bin/perf)
==45136== by 0x142D76: main (in /usr/bin/perf)
==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd
==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675)
==45136== by 0x3574AB: zalloc (in /usr/bin/perf)
==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf)
==45136== by 0x15A845: cmd_record (in /usr/bin/perf)
==45136== by 0x201B7E: run_builtin (in /usr/bin/perf)
==45136== by 0x142D76: main (in /usr/bin/perf)
==45136==
-----
Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/
Reported-by: Milian Wolff <milian.wolff@kdab.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@kernel.org # 6.8+
Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For ${atomic}_sub_and_test() the @i parameter is the value to subtract,
not add. Fix the typo in the kerneldoc template and generate the headers
with this update.
Fixes: ad8110706f38 ("locking/atomic: scripts: generate kerneldoc comments")
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240515133844.3502360-1-cmllamas@google.com
|
|
In our production environment, we found many hung tasks which are
blocked for more than 18 hours. Their call traces are like this:
[346278.191038] __schedule+0x2d8/0x890
[346278.191046] schedule+0x4e/0xb0
[346278.191049] perf_event_free_task+0x220/0x270
[346278.191056] ? init_wait_var_entry+0x50/0x50
[346278.191060] copy_process+0x663/0x18d0
[346278.191068] kernel_clone+0x9d/0x3d0
[346278.191072] __do_sys_clone+0x5d/0x80
[346278.191076] __x64_sys_clone+0x25/0x30
[346278.191079] do_syscall_64+0x5c/0xc0
[346278.191083] ? syscall_exit_to_user_mode+0x27/0x50
[346278.191086] ? do_syscall_64+0x69/0xc0
[346278.191088] ? irqentry_exit_to_user_mode+0x9/0x20
[346278.191092] ? irqentry_exit+0x19/0x30
[346278.191095] ? exc_page_fault+0x89/0x160
[346278.191097] ? asm_exc_page_fault+0x8/0x30
[346278.191102] entry_SYSCALL_64_after_hwframe+0x44/0xae
The task was waiting for the refcount become to 1, but from the vmcore,
we found the refcount has already been 1. It seems that the task didn't
get woken up by perf_event_release_kernel() and got stuck forever. The
below scenario may cause the problem.
Thread A Thread B
... ...
perf_event_free_task perf_event_release_kernel
...
acquire event->child_mutex
...
get_ctx
... release event->child_mutex
acquire ctx->mutex
...
perf_free_event (acquire/release event->child_mutex)
...
release ctx->mutex
wait_var_event
acquire ctx->mutex
acquire event->child_mutex
# move existing events to free_list
release event->child_mutex
release ctx->mutex
put_ctx
... ...
In this case, all events of the ctx have been freed, so we couldn't
find the ctx in free_list and Thread A will miss the wakeup. It's thus
necessary to add a wakeup after dropping the reference.
Fixes: 1cf8dfe8a661 ("perf/core: Fix race between close() and fork()")
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240513103948.33570-1-haifeng.xu@shopee.com
|
|
Tariq Toukan says:
====================
mlx5 core fixes 20240603
This small patchset provides two bug fixes from the team to the mlx5 core driver.
Series generated against:
commit 33700a0c9b56 ("net/tcp: Don't consider TCP_CLOSE in TCP_AO_ESTABLISHED")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
