| Age | Commit message (Collapse) | Author |
|---|
|
The synth_event_gen_test module can be built in, if someone wants to run
the tests at boot up and not have to load them.
The synth_event_gen_test_init() function creates and enables the synthetic
events and runs its tests.
The synth_event_gen_test_exit() disables the events it created and
destroys the events.
If the module is builtin, the events are never disabled. The issue is, the
events should be disable after the tests are run. This could be an issue
if the rest of the boot up tests are enabled, as they expect the events to
be in a known state before testing. That known state happens to be
disabled.
When CONFIG_SYNTH_EVENT_GEN_TEST=y and CONFIG_EVENT_TRACE_STARTUP_TEST=y
a warning will trigger:
Running tests on trace events:
Testing event create_synth_test:
Enabled event during self test!
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1 at kernel/trace/trace_events.c:4150 event_trace_self_tests+0x1c2/0x480
Modules linked in:
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc2-test-00031-gb803d7c664d5-dirty #276
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:event_trace_self_tests+0x1c2/0x480
Code: bb e8 a2 ab 5d fc 48 8d 7b 48 e8 f9 3d 99 fc 48 8b 73 48 40 f6 c6 01 0f 84 d6 fe ff ff 48 c7 c7 20 b6 ad bb e8 7f ab 5d fc 90 <0f> 0b 90 48 89 df e8 d3 3d 99 fc 48 8b 1b 4c 39 f3 0f 85 2c ff ff
RSP: 0000:ffffc9000001fdc0 EFLAGS: 00010246
RAX: 0000000000000029 RBX: ffff88810399ca80 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffffb9f19478 RDI: ffff88823c734e64
RBP: ffff88810399f300 R08: 0000000000000000 R09: fffffbfff79eb32a
R10: ffffffffbcf59957 R11: 0000000000000001 R12: ffff888104068090
R13: ffffffffbc89f0a0 R14: ffffffffbc8a0f08 R15: 0000000000000078
FS: 0000000000000000(0000) GS:ffff88823c700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000001f6282001 CR4: 0000000000170ef0
Call Trace:
<TASK>
? __warn+0xa5/0x200
? event_trace_self_tests+0x1c2/0x480
? report_bug+0x1f6/0x220
? handle_bug+0x6f/0x90
? exc_invalid_op+0x17/0x50
? asm_exc_invalid_op+0x1a/0x20
? tracer_preempt_on+0x78/0x1c0
? event_trace_self_tests+0x1c2/0x480
? __pfx_event_trace_self_tests_init+0x10/0x10
event_trace_self_tests_init+0x27/0xe0
do_one_initcall+0xd6/0x3c0
? __pfx_do_one_initcall+0x10/0x10
? kasan_set_track+0x25/0x30
? rcu_is_watching+0x38/0x60
kernel_init_freeable+0x324/0x450
? __pfx_kernel_init+0x10/0x10
kernel_init+0x1f/0x1e0
? _raw_spin_unlock_irq+0x33/0x50
ret_from_fork+0x34/0x60
? __pfx_kernel_init+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
This is because the synth_event_gen_test_init() left the synthetic events
that it created enabled. By having it disable them after testing, the
other selftests will run fine.
Link: https://lore.kernel.org/linux-trace-kernel/20231220111525.2f0f49b0@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 9fe41efaca084 ("tracing: Add synth event generation test module")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: Alexander Graf <graf@amazon.com>
Tested-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Dongliang reported:
I found that in the latest version, the nodes of tracefs have been
changed to dynamically created.
This has caused me to encounter a problem where the gid I specified in
the mounting parameters cannot apply to all files, as in the following
situation:
/data/tmp/events # mount | grep tracefs
tracefs on /data/tmp type tracefs (rw,seclabel,relatime,gid=3012)
gid 3012 = readtracefs
/data/tmp # ls -lh
total 0
-r--r----- 1 root readtracefs 0 1970-01-01 08:00 README
-r--r----- 1 root readtracefs 0 1970-01-01 08:00 available_events
ums9621_1h10:/data/tmp/events # ls -lh
total 0
drwxr-xr-x 2 root root 0 2023-12-19 00:56 alarmtimer
drwxr-xr-x 2 root root 0 2023-12-19 00:56 asoc
It will prevent certain applications from accessing tracefs properly, I
try to avoid this issue by making the following modifications.
To fix this, have the files created default to taking the ownership of
the parent dentry unless the ownership was previously set by the user.
Link: https://lore.kernel.org/linux-trace-kernel/1703063706-30539-1-git-send-email-dongliang.cui@unisoc.com/
Link: https://lore.kernel.org/linux-trace-kernel/20231220105017.1489d790@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Hongyu Jin <hongyu.jin@unisoc.com>
Fixes: 28e12c09f5aa0 ("eventfs: Save ownership and mode")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: Dongliang Cui <cuidongliang390@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If a key has an expiration time, then when that time passes, the key is
left around for a certain amount of time before being collected (5 mins by
default) so that EKEYEXPIRED can be returned instead of ENOKEY. This is a
problem for DNS keys because we want to redo the DNS lookup immediately at
that point.
Fix this by allowing key types to be marked such that keys of that type
don't have this extra period, but are reclaimed as soon as they expire and
turn this on for dns_resolver-type keys. To make this easier to handle,
key->expiry is changed to be permanent if TIME64_MAX rather than 0.
Furthermore, give such new-style negative DNS results a 1s default expiry
if no other expiry time is set rather than allowing it to stick around
indefinitely. This shouldn't be zero as ls will follow a failing stat call
immediately with a second with AT_SYMLINK_NOFOLLOW added.
Fixes: 1a4240f4764a ("DNS: Separate out CIFS DNS Resolver code")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Wang Lei <wang840925@gmail.com>
cc: Jeff Layton <jlayton@redhat.com>
cc: Steve French <smfrench@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: keyrings@vger.kernel.org
cc: netdev@vger.kernel.org
|
|
Bring in the changes to the file infrastructure for this cycle. Mostly
cleanups and some performance tweaks.
* file: remove __receive_fd()
* file: stop exposing receive_fd_user()
* fs: replace f_rcuhead with f_task_work
* file: remove pointless wrapper
* file: s/close_fd_get_file()/file_close_fd()/g
* Improve __fget_files_rcu() code generation (and thus __fget_light())
* file: massage cleanup of files that failed to open
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When compiling with gcc version 14.0.0 20231220 (experimental)
and W=1, I've noticed the following warning:
kernel/watch_queue.c: In function 'watch_queue_set_size':
kernel/watch_queue.c:273:32: warning: 'kcalloc' sizes specified with 'sizeof'
in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
273 | pages = kcalloc(sizeof(struct page *), nr_pages, GFP_KERNEL);
| ^~~~~~
Since 'n' and 'size' arguments of 'kcalloc()' are multiplied to
calculate the final size, their actual order doesn't affect the
result and so this is not a bug. But it's still worth to fix it.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20231221090139.12579-1-dmantipov@yandex.ru
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Correct the kernel-doc function parameter warnings for function
ntfs_dir_fsync() to prevent the following kernel-doc warnings:
dir.c:1489: warning: Function parameter or member 'start' not described in 'ntfs_dir_fsync'
dir.c:1489: warning: Function parameter or member 'end' not described in 'ntfs_dir_fsync'
dir.c:1489: warning: Excess function parameter 'dentry' description in 'ntfs_dir_fsync'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20231219045414.24670-1-rdunlap@infradead.org
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: <linux-ntfs-dev@lists.sourceforge.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Do the replacement:
s/simply passs @nop_mnt_idmap/simply pass @nop_mnt_idmap/
in the fs/ tree.
Found by chance while working on support for idmapped mounts in fuse.
Cc: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Link: https://lore.kernel.org/r/20231215130927.136917-1-aleksandr.mikhalitsyn@canonical.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When mapping a file on overlayfs, the file stored in ->vm_file is a
backing file whose f_inode is on the underlying filesystem. We need to
verify that /proc/pid/maps contains numbers of the overlayfs file, but
not its backing file.
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Alexander Mikhalitsyn <alexander@mihalicyn.com>
Signed-off-by: Andrei Vagin <avagin@google.com>
Link: https://lore.kernel.org/r/20231214064439.1023011-2-avagin@google.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
/proc/pid/maps shows device and inode numbers of vma->vm_file-s. Here is
an issue. If a mapped file is on a stackable file system (e.g.,
overlayfs), vma->vm_file is a backing file whose f_inode is on the
underlying filesystem. To show correct numbers, we need to get a user
file and shows its numbers. The same trick is used to show file paths in
/proc/pid/maps.
Cc: Alexander Mikhalitsyn <alexander@mihalicyn.com>
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Andrei Vagin <avagin@google.com>
Link: https://lore.kernel.org/r/20231214064439.1023011-1-avagin@google.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-12-21
Hi David, hi Jakub, hi Paolo, hi Eric,
The following pull-request contains BPF updates for your *net* tree.
We've added 3 non-merge commits during the last 5 day(s) which contain
a total of 4 files changed, 45 insertions(+).
The main changes are:
1) Fix a syzkaller splat which triggered an oob issue in bpf_link_show_fdinfo(),
from Jiri Olsa.
2) Fix another syzkaller-found issue which triggered a NULL pointer dereference
in BPF sockmap for unconnected unix sockets, from John Fastabend.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add missing BPF_LINK_TYPE invocations
bpf: sockmap, test for unconnected af_unix sock
bpf: syzkaller found null ptr deref in unix_bpf proto add
====================
Link: https://lore.kernel.org/r/20231221104844.1374-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In the opal_prd_range_is_valid function within opal-prd.c,
error handling was missing for the of_get_address call.
This patch adds necessary error checking, ensuring that the
function gracefully handles scenarios where of_get_address fails.
Signed-off-by: Haoran Liu <liuhaoran14@163.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231127144108.29782-1-liuhaoran14@163.com
|
|
There is a spelling mistake of the EACCES error name, fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231215112456.13554-1-colin.i.king@gmail.com
|
|
Reorder the newly introduced hcall opcodes for Nestedv2 to follow the
increasing-opcode-number convention followed in 'hvcall.h'.
Also updates the value for MAX_HCALL_OPCODE which is used in various
places in arch code for range checking. Notably in the KVM enabled-hcall
logic, and in hcall tracing.
Fixes: 19d31c5f1157 ("KVM: PPC: Add support for nestedv2 guests")
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231219092309.118151-1-vaibhav@linux.ibm.com
|
|
The kernel thread function ps3_probe_thread() invokes the try_to_freeze()
in its loop. But all the kernel threads are non-freezable by default.
So if we want to make a kernel thread to be freezable, we have to invoke
set_freezable() explicitly.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231221044510.1802429-4-haokexin@gmail.com
|
|
A freezable kernel thread can enter frozen state during freezing by
either calling try_to_freeze() or using wait_event_freezable() and its
variants. So for the following snippet of code in a kernel thread loop:
wait_event_interruptible();
try_to_freeze();
We can change it to a simple wait_event_freezable() and then eliminate
a function call.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231221044510.1802429-3-haokexin@gmail.com
|
|
The kernel thread function agent_thread_fn() invokes the try_to_freeze()
in its loop. But all the kernel threads are non-freezable by default.
So if we want to make a kernel thread to be freezable, we have to invoke
set_freezable() explicitly.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231221044510.1802429-2-haokexin@gmail.com
|
|
In the hardware implementation of the I2C HID driver based on DesignWare
GPIO IRQ chip, when the user continues to use the I2C HID device in the
suspend process, the I2C HID interrupt will be masked after the resume
process is finished.
This is because the disable_irq()/enable_irq() of the DesignWare GPIO
driver does not synchronize the IRQ mask register state. In normal use
of the I2C HID procedure, the GPIO IRQ irq_mask()/irq_unmask() functions
are called in pairs. In case of an exception, i2c_hid_core_suspend()
calls disable_irq() to disable the GPIO IRQ. With low probability, this
causes irq_unmask() to not be called, which causes the GPIO IRQ to be
masked and not unmasked in enable_irq(), raising an exception.
Add synchronization to the masked register state in the
dwapb_irq_enable()/dwapb_irq_disable() function. mask the GPIO IRQ
before disabling it. After enabling the GPIO IRQ, unmask the IRQ.
Fixes: 7779b3455697 ("gpio: add a driver for the Synopsys DesignWare APB GPIO block")
Cc: stable@kernel.org
Co-developed-by: Riwen Lu <luriwen@kylinos.cn>
Signed-off-by: Riwen Lu <luriwen@kylinos.cn>
Signed-off-by: xiongxin <xiongxin@kylinos.cn>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
While the GPIO cdev gpio_ioctl() call is in progress, the kernel can
call gpiochip_remove() which will set gdev->chip to NULL, after which
any subsequent access will cause a crash.
gpio_ioctl() was overlooked by the previous fix to protect syscalls
(bdbbae241a04), so add protection for that.
Fixes: bdbbae241a04 ("gpiolib: protect the GPIO device against being dropped while in use by user-space")
Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL")
Fixes: aad955842d1c ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Some drivers might misbehave if TSO packets get too big.
GVE for instance uses a 16bit field in its TX descriptor,
and will do bad things if a packet is bigger than 2^16 bytes.
Linux TCP stack honors dev->gso_max_size, but there are
other ways for too big packets to reach an ndo_start_xmit()
handler : virtio_net, af_packet, GRO...
Add a generic check in gso_features_check() and fallback
to GSO when needed.
gso_max_size was added in the blamed commit.
Fixes: 82cc1a7a5687 ("[NET]: Add per-connection option to set max TSO frame size")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231219125331.4127498-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
run_cmd_grep_fail should be used when expecting the cmd fail, or the ret
will be set to 1, and the total test return 1 when exiting. This would cause
the result report to fail if run via run_kselftest.sh.
Before fix:
# ./rtnetlink.sh -t kci_test_addrlft
PASS: preferred_lft addresses have expired
# echo $?
1
After fix:
# ./rtnetlink.sh -t kci_test_addrlft
PASS: preferred_lft addresses have expired
# echo $?
0
Fixes: 9c2a19f71515 ("kselftest: rtnetlink.sh: add verbose flag")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231219065737.1725120-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If CONFIG_SPI is not set in the kernel, there is no point in trying
to set the chip selects. We can selectively compile it.
Fixes: 8c4c216db8fb ("ALSA: hda: cs35l41: Add config table to support many laptops without _DSD")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312192256.lJelQEoZ-lkp@intel.com/
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231219162232.790358-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Initialise the variables to NULL so that they cannot be uninitialised
when devm_kfree is called.
Found by static analysis.
Fixes: 8c4c216db8fb ("ALSA: hda: cs35l41: Add config table to support many laptops without _DSD")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231219162232.790358-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.7
Quite a big collection of fixes, as ever mostly in drivers. There's one
framework fix for the HDMI CODEC where it wasn't handling startup
properly for some controllers, and one new x86 quirk, but otherwise all
local fixes or dropping things we don't want to see in a release.
|
|
Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep
warning:
============================================
WARNING: possible recursive locking detected
6.7.0-rc5-wt+ #532 Not tainted
--------------------------------------------
sh/92 is trying to acquire lock:
c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
but task is already holding lock:
c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&irq_desc_lock_class);
lock(&irq_desc_lock_class);
*** DEADLOCK ***
May be due to missing lock nesting notation
6 locks held by sh/92:
#0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178
#1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284
#2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284
#3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8
#4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c
#5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
stack backtrace:
CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532
Hardware name: Atmel SAMA5
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x48
dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c
__lock_acquire from lock_acquire.part.0+0x124/0x2d0
lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78
_raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100
__irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204
irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4
atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204
irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8
gpio_keys_suspend from dpm_run_callback+0xe4/0x248
dpm_run_callback from __device_suspend+0x234/0x91c
__device_suspend from dpm_suspend+0x224/0x43c
dpm_suspend from dpm_suspend_start+0x9c/0xa8
dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84
suspend_devices_and_enter from pm_suspend+0x460/0x4e8
pm_suspend from state_store+0x78/0xe4
state_store from kernfs_fop_write_iter+0x1a0/0x284
kernfs_fop_write_iter from vfs_write+0x38c/0x6f4
vfs_write from ksys_write+0xd8/0x178
ksys_write from ret_fast_syscall+0x0/0x1c
Exception stack(0xc52b3fa8 to 0xc52b3ff0)
3fa0: 00000004 005a0ae8 00000001 005a0ae8 00000004 00000001
3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190
3fe0: 00000004 b6c61678 aec5a041 aebf1a26
This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever
a wake up source configures an IRQ through irq_set_irq_wake, it will
lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent"
IRQ which will do the same on its own IRQ desc, but since those two locks
share the same class, lockdep reports this as an issue.
Fix lockdep false positive by setting a different class for parent and
children IRQ
Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20231215-lockdep_warning-v1-1-8137b2510ed5@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Update the constant names for unused USB PIDs (product identifiers) to
reflect the new products now using the PIDs.
Signed-off-by: Mark Glover <mark.glover@actisense.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
This reverts commit 3dec89b14d37ee635e772636dad3f09f78f1ab87.
The commit has some race conditions given how expires is managed on a
fib6_info in relation to gc start, adding the entry to the gc list and
setting the timer value leading to UAF. Revert the commit and try again
in a later release.
Fixes: 3dec89b14d37 ("net/ipv6: Remove expired routes with a separated list of routes")
Cc: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231219030243.25687-1-dsahern@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-12-18 (ice)
This series contains updates to ice driver only.
Jakes stops clearing of needed aggregator information.
Dave adds a check for LAG device support before initializing the
associated event handler.
Larysa restores accounting of XDP queues in TC configurations.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix PF with enabled XDP going no-carrier after reset
ice: alter feature support check for SRIOV and LAG
ice: stop trashing VF VSI aggregator node ID information
====================
Link: https://lore.kernel.org/r/20231218192708.3397702-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Xen only supports modern CPUs even when running a 32-bit kernel, and it now
requires a kernel built for a 64 byte (or larger) cache line:
In file included from <command-line>:
In function 'xen_vcpu_setup',
inlined from 'xen_vcpu_setup_restore' at arch/x86/xen/enlighten.c:111:3,
inlined from 'xen_vcpu_restore' at arch/x86/xen/enlighten.c:141:3:
include/linux/compiler_types.h:435:45: error: call to '__compiletime_assert_287' declared with attribute error: BUILD_BUG_ON failed: sizeof(*vcpup) > SMP_CACHE_BYTES
arch/x86/xen/enlighten.c:166:9: note: in expansion of macro 'BUILD_BUG_ON'
166 | BUILD_BUG_ON(sizeof(*vcpup) > SMP_CACHE_BYTES);
| ^~~~~~~~~~~~
Enforce the dependency with a whitelist of CPU configurations. In normal
distro kernels, CONFIG_X86_GENERIC is enabled, and this works fine. When this
is not set, still allow Xen to be built on kernels that target a 64-bit
capable CPU.
Fixes: db2832309a82 ("x86/xen: fix percpu vcpu_info allocation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Alyssa Ross <hi@alyssa.is>
Link: https://lore.kernel.org/r/20231204084722.3789473-1-arnd@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
GCC seems to incorrectly fail to evaluate skb_ext_total_length() at
compile time under certain conditions.
The issue even occurs if all values in skb_ext_type_len[] are "0",
ruling out the possibility of an actual overflow.
As the patch has been in mainline since v6.6 without triggering the
problem it seems to be a very uncommon occurrence.
As the issue only occurs when -fno-tree-loop-im is specified as part of
CFLAGS_GCOV, disable the BUILD_BUG_ON() only when building with coverage
reporting enabled.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312171924.4FozI5FG-lkp@intel.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/487cfd35-fe68-416f-9bfd-6bb417f98304@app.fastmail.com/
Fixes: 5d21d0a65b57 ("net: generalize calculation of skb extensions length")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231218-net-skbuff-build-bug-v1-1-eefc2fb0a7d3@weissschuh.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
mtk_wed_wo_queue_tx_clean()
In order to avoid a NULL pointer dereference, check entry->buf pointer before running
skb_free_frag in mtk_wed_wo_queue_tx_clean routine.
Fixes: 799684448e3e ("net: ethernet: mtk_wed: introduce wed wo support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/3c1262464d215faa8acebfc08869798c81c96f4a.1702827359.git.lorenzo@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Only the posix timer system calls use this (when the posix timer support
is disabled, which does not actually happen in any normal case), because
they had debug code to print out a warning about missing system calls.
Get rid of that special case, and just use the standard COND_SYSCALL
interface that creates weak system call stubs that return -ENOSYS for
when the system call does not exist.
This fixes a kCFI issue with the SYS_NI() hackery:
CFI failure at int80_emulation+0x67/0xb0 (target: sys_ni_posix_timers+0x0/0x70; expected type: 0xb02b34d9)
WARNING: CPU: 0 PID: 48 at int80_emulation+0x67/0xb0
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull smb client fixes from Steve French:
- two multichannel reconnect fixes, one fixing an important refcounting
problem that can lead to umount problems
- atime fix
- five fixes for various potential OOB accesses, including a CVE fix,
and two additional fixes for problems pointed out by Robert Morris's
fuzzing investigation
* tag '6.7-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: do not let cifs_chan_update_iface deallocate channels
cifs: fix a pending undercount of srv_count
fs: cifs: Fix atime update check
smb: client: fix potential OOB in smb2_dump_detail()
smb: client: fix potential OOB in cifs_dump_detail()
smb: client: fix OOB in smbCalcSize()
smb: client: fix OOB in SMB2_query_info_init()
smb: client: fix OOB in cifsd when receiving compounded resps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix virtual vs physical address confusion in Storage Class Memory
(SCM) block device driver.
- Fix saving and restoring of FPU kernel context, which could lead to
corruption of vector registers 8-15
- Update defconfigs
* tag 's390-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390/vx: fix save/restore of fpu kernel context
s390/scm: fix virtual vs physical address confusion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are only a handful of bugfixes this time, which feels almost too
small, so I hope we are not missing something important.
- One more mediatek dts warning fix after the previous larger set,
this should finally result in a clean defconfig build.
- TI OMAP dts fixes for a spurious hang on am335x and invalid data on
DTA7
- One DTS fix for ethernet on Oriange Pi Zero (Allwinner H616)
- A regression fix for ti-sysc interconnect target module driver to
not access registers after reset if srst_udelay quirk is needed
- Reset controller driver fixes for a crash during error handling and
a build warning"
* tag 'soc-fixes-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: mediatek: mt8395-genio-1200-evk: add interrupt-parent for mt6360
ARM: dts: Fix occasional boot hang for am3 usb
reset: Fix crash when freeing non-existent optional resets
ARM: OMAP2+: Fix null pointer dereference and memory leak in omap_soc_device_init
ARM: dts: dra7: Fix DRA7 L3 NoC node register size
bus: ti-sysc: Flush posted write only after srst_udelay
reset: hisilicon: hi6220: fix Wvoid-pointer-to-enum-cast warning
arm64: dts: allwinner: h616: update emac for Orange Pi Zero 3
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
- Fan reporting on some ThinkPads
- Laptop 13 spurious keypresses while suspended
- Intel PMC correction to avoid crash
* tag 'platform-drivers-x86-v6.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/pmc: Disable keyboard wakeup on AMD Framework 13
platform/x86/amd/pmc: Move keyboard wakeup disablement detection to pmc-quirks
platform/x86/amd/pmc: Only run IRQ1 firmware version check on Cezanne
platform/x86/amd/pmc: Move platform defines to header
platform/x86/intel/pmc: Fix hang in pmc_core_send_ltr_ignore()
platform/x86: thinkpad_acpi: fix for incorrect fan reporting on some ThinkPad systems
|
|
This address now bounces, remap it to a current address.
Link: https://lkml.kernel.org/r/20231218140328.3313474-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On 32-bit systems, we'll lose the top bits of index because arithmetic
will be performed in unsigned long instead of unsigned long long. This
affects files over 4GB in size.
Link: https://lkml.kernel.org/r/20231218135837.3310403-4-willy@infradead.org
Fixes: 6100e34b2526 ("mm, memory_failure: Teach memory_failure() about dev_pagemap pages")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A process may map only some of the pages in a folio, and might be missed
if it maps the poisoned page but not the head page. Or it might be
unnecessarily hit if it maps the head page, but not the poisoned page.
Link: https://lkml.kernel.org/r/20231218135837.3310403-3-willy@infradead.org
Fixes: 7af446a841a2 ("HWPOISON, hugetlb: enable error handling path for hugepage")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Three memory-failure fixes".
I've been looking at the memory-failure code and I believe I have found
three bugs that need fixing -- one going all the way back to 2010! I'll
have more patches later to use folios more extensively but didn't want
these bugfixes to get caught up in that.
This patch (of 3):
Both collect_procs_anon() and collect_procs_file() iterate over the VMA
interval trees looking for a single pgoff, so it is wrong to look for the
pgoff of the head page as is currently done. However, it is also wrong to
look at page->mapping of the precise page as this is invalid for tail
pages. Clear up the confusion by passing both the folio and the precise
page to collect_procs().
Link: https://lkml.kernel.org/r/20231218135837.3310403-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20231218135837.3310403-2-willy@infradead.org
Fixes: 415c64c1453a ("mm/memory-failure: split thp earlier in memory error handling")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The "locked-in-memory size" limit per process can be non-multiple of
page_size. The mmap() fails if we try to allocate locked-in-memory with
same size as the allowed limit if it isn't multiple of the page_size
because mmap() rounds off the memory size to be allocated to next multiple
of page_size.
Fix this by flooring the length to be allocated with mmap() to the
previous multiple of the page_size.
This was getting triggered on KernelCI regularly because of different
ulimit settings which wasn't multiple of the page_size. Find logs
here: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/
The bug in was present from the time test was first added.
Link: https://lkml.kernel.org/r/20231214101931.1155586-1-usama.anjum@collabora.com
Fixes: 76fe17ef588a ("secretmem: test: add basic selftest for memfd_secret(2)")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Closes: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Large folios occupy N consecutive entries in the swap cache instead of
using multi-index entries like the page cache. However, if a large folio
is re-added to the LRU list, it can be migrated. The migration code was
not aware of the difference between the swap cache and the page cache and
assumed that a single xas_store() would be sufficient.
This leaves potentially many stale pointers to the now-migrated folio in
the swap cache, which can lead to almost arbitrary data corruption in the
future. This can also manifest as infinite loops with the RCU read lock
held.
[willy@infradead.org: modifications to the changelog & tweaked the fix]
Fixes: 3417013e0d18 ("mm/migrate: Add folio_migrate_mapping()")
Link: https://lkml.kernel.org/r/20231214045841.961776-1-willy@infradead.org
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Charan Teja Kalla <quic_charante@quicinc.com>
Closes: https://lkml.kernel.org/r/1700569840-17327-1-git-send-email-quic_charante@quicinc.com
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mas_preallocate() defaults to requesting 1 node for preallocation and then
,depending on the type of store, will update the request variable. There
isn't a check for a slot store type, so slot stores are preallocating the
default 1 node. Slot stores do not require any additional nodes, so add a
check for the slot store case that will bypass node_count_gfp(). Update
the tests to reflect that slot stores do not require allocations.
User visible effects of this bug include increased memory usage from the
unneeded node that was allocated.
Link: https://lkml.kernel.org/r/20231213205058.386589-1-sidhartha.kumar@oracle.com
Fixes: 0b8bb544b1a7 ("maple_tree: update mas_preallocate() testing")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The following concurrency may cause the data read to be inconsistent with
the data on disk:
cpu1 cpu2
------------------------------|------------------------------
// Buffered write 2048 from 0
ext4_buffered_write_iter
generic_perform_write
copy_page_from_iter_atomic
ext4_da_write_end
ext4_da_do_write_end
block_write_end
__block_commit_write
folio_mark_uptodate
// Buffered read 4096 from 0 smp_wmb()
ext4_file_read_iter set_bit(PG_uptodate, folio_flags)
generic_file_read_iter i_size_write // 2048
filemap_read unlock_page(page)
filemap_get_pages
filemap_get_read_batch
folio_test_uptodate(folio)
ret = test_bit(PG_uptodate, folio_flags)
if (ret)
smp_rmb();
// Ensure that the data in page 0-2048 is up-to-date.
// New buffered write 2048 from 2048
ext4_buffered_write_iter
generic_perform_write
copy_page_from_iter_atomic
ext4_da_write_end
ext4_da_do_write_end
block_write_end
__block_commit_write
folio_mark_uptodate
smp_wmb()
set_bit(PG_uptodate, folio_flags)
i_size_write // 4096
unlock_page(page)
isize = i_size_read(inode) // 4096
// Read the latest isize 4096, but without smp_rmb(), there may be
// Load-Load disorder resulting in the data in the 2048-4096 range
// in the page is not up-to-date.
copy_page_to_iter
// copyout 4096
In the concurrency above, we read the updated i_size, but there is no read
barrier to ensure that the data in the page is the same as the i_size at
this point, so we may copy the unsynchronized page out. Hence adding the
missing read memory barrier to fix this.
This is a Load-Load reordering issue, which only occurs on some weak
mem-ordering architectures (e.g. ARM64, ALPHA), but not on strong
mem-ordering architectures (e.g. X86). And theoretically the problem
doesn't only happen on ext4, filesystems that call filemap_read() but
don't hold inode lock (e.g. btrfs, f2fs, ubifs ...) will have this
problem, while filesystems with inode lock (e.g. xfs, nfs) won't have
this problem.
Link: https://lkml.kernel.org/r/20231213062324.739009-1-libaokun1@huawei.com
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: yangerkun <yangerkun@huawei.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Similar to commit 09c6304e38e4 ("kasan: test: fix compatibility with
FORTIFY_SOURCE") the kernel is panicing in kmalloc_oob_memset_*.
This is due to the `ptr` not being hidden from the optimizer which would
disable the runtime fortify string checker.
kernel BUG at lib/string_helpers.c:1048!
Call Trace:
[<00000000272502e2>] fortify_panic+0x2a/0x30
([<00000000272502de>] fortify_panic+0x26/0x30)
[<001bffff817045c4>] kmalloc_oob_memset_2+0x22c/0x230 [kasan_test]
Hide the `ptr` variable from the optimizer to fix the kernel panic. Also
define a memset_size variable and hide that as well. This cleans up the
code and follows the same convention as other tests.
[npache@redhat.com: address review comments from Andrey]
Link: https://lkml.kernel.org/r/20231214164423.6202-1-npache@redhat.com
Link: https://lkml.kernel.org/r/20231212232659.18839-1-npache@redhat.com
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All other users of crypto code use 'select' instead of 'depends on', so do
the same thing with KEXEC_FILE for consistency.
In practice this makes very little difference as kernels with kexec
support are very likely to also include some other feature that already
selects both crypto and crypto_sha256, but being consistent here helps for
usability as well as to avoid potential circular dependencies.
This reverts the dependency back to what it was originally before commit
74ca317c26a3f ("kexec: create a new config option CONFIG_KEXEC_FILE for
new syscall"), which changed changed it with the comment "This should be
safer as "select" is not recursive", but that appears to have been done in
error, as "select" is indeed recursive, and there are no other
dependencies that prevent CRYPTO_SHA256 from being selected here.
Link: https://lkml.kernel.org/r/20231023110308.1202042-2-arnd@kernel.org
Fixes: 74ca317c26a3f ("kexec: create a new config option CONFIG_KEXEC_FILE for new syscall")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Tested-by: Eric DeVolder <eric_devolder@yahoo.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Conor Dooley <conor@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The cleanup for the CONFIG_KEXEC Kconfig logic accidentally changed the
'depends on CRYPTO=y' dependency to a plain 'depends on CRYPTO', which
causes a link failure when all the crypto support is in a loadable module
and kexec_file support is built-in:
x86_64-linux-ld: vmlinux.o: in function `__x64_sys_kexec_file_load':
(.text+0x32e30a): undefined reference to `crypto_alloc_shash'
x86_64-linux-ld: (.text+0x32e58e): undefined reference to `crypto_shash_update'
x86_64-linux-ld: (.text+0x32e6ee): undefined reference to `crypto_shash_final'
Both s390 and x86 have this problem, while ppc64 and riscv have the
correct dependency already. On riscv, the dependency is only used for the
purgatory, not for the kexec_file code itself, which may be a bit
surprising as it means that with CONFIG_CRYPTO=m, it is possible to enable
KEXEC_FILE but then the purgatory code is silently left out.
Move this into the common Kconfig.kexec file in a way that is correct
everywhere, using the dependency on CRYPTO_SHA256=y only when the
purgatory code is available. This requires reversing the dependency
between ARCH_SUPPORTS_KEXEC_PURGATORY and KEXEC_FILE, but the effect
remains the same, other than making riscv behave like the other ones.
On s390, there is an additional dependency on CRYPTO_SHA256_S390, which
should technically not be required but gives better performance. Remove
this dependency here, noting that it was not present in the initial
Kconfig code but was brought in without an explanation in commit
71406883fd357 ("s390/kexec_file: Add kexec_file_load system call").
[arnd@arndb.de: fix riscv build]
Link: https://lkml.kernel.org/r/67ddd260-d424-4229-a815-e3fcfb864a77@app.fastmail.com
Link: https://lkml.kernel.org/r/20231023110308.1202042-1-arnd@kernel.org
Fixes: 6af5138083005 ("x86/kexec: refactor for kernel/Kconfig.kexec")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Tested-by: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Conor Dooley <conor@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The 'delta' variable is zero-initialized, but never
read before the real initialization happens.
The assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231219141304.367200-1-colin.i.king@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs fix from Amir Goldstein:
"Fix a regression from this merge window"
* tag 'ovl-fixes-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: fix dentry reference leak after changes to underlying layers
|
|
Pull more bcachefs fixes from Kent Overstreet:
- Fix a deadlock in the data move path with nocow locks (vs. update in
place writes); when trylock failed we were incorrectly waiting for in
flight ios to flush.
- Fix reporting of NFS file handle length
- Fix early error path in bch2_fs_alloc() - list head wasn't being
initialized early enough
- Make sure correct (hardware accelerated) crc modules get loaded
- Fix a rare overflow in the btree split path, when the packed bkey
format grows and all the keys have no value (LRU btree).
- Fix error handling in the sector allocator
This was causing writes to spuriously fail in multidevice setups, and
another bug meant that the errors weren't being logged, only reported
via fsync.
* tag 'bcachefs-2023-12-19' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix bch2_alloc_sectors_start_trans() error handling
bcachefs; guard against overflow in btree node split
bcachefs: btree_node_u64s_with_format() takes nr keys
bcachefs: print explicit recovery pass message only once
bcachefs: improve modprobe support by providing softdeps
bcachefs: fix invalid memory access in bch2_fs_alloc() error path
bcachefs: Fix determining required file handle length
bcachefs: Fix nocow locks deadlock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Address a few recently-introduced issues
* tag 'nfsd-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Revert 5f7fc5d69f6e92ec0b38774c387f5cf7812c5806
NFSD: Revert 738401a9bd1ac34ccd5723d69640a4adbb1a4bc0
NFSD: Revert 6c41d9a9bd0298002805758216a9c44e38a8500d
nfsd: hold nfsd_mutex across entire netlink operation
nfsd: call nfsd_last_thread() before final nfsd_put()
|
