| Age | Commit message (Collapse) | Author |
|---|
|
Add ElkhartLake as a unique platform as there are some differences
between it and Icelake.
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322175847.25707-2-rodrigo.vivi@intel.com
|
|
Add known EHL PCI IDs.
v2 (Rodrigo): Removed x86 early quirk. To be sent in a separated
patch cc'ing the appropriated list and maintainers for
proper ack.
v3: (Rodrigo): - Removed .num_pipes = 3 that is coming since GEN&_FEATURES.
- Added ppgtt type and size after rework from Bob and Chris
v4: (Rodrigo): - remove ppgtt type added on v3. Jose pointed it is not
needed.
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322175847.25707-1-rodrigo.vivi@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework fix from Rafael Wysocki:
"Add missing 'static' in two places (YueHaibing)"
* tag 'devprop-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
drivers: base: swnode: Make two functions static
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Prevent device references acquired by bus_find_device() in
acpi_dev_present() from being leaked (Andy Shevchenko)"
* tag 'acpi-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / utils: Drop reference in test for device presence
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These rearrange some code in the generic power domains (genpd)
framework to avoid a potential deadlock and make the turbostat utility
behave more as expected.
Specifics:
- Rearrange the generic power domains (genpd) code to avoid a
potential deadlock possible due to its interactions with the clock
framework (Jiada Wang)
- Make turbostat return the exit status of the command run under it
if that command fails (David Arcari)"
* tag 'pm-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / Domains: Avoid a potential deadlock
tools/power turbostat: return the exit status of a command
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"A couple of MMC host fixes intended for v5.1:
- alcor: Fix DMA reads
- renesas_sdhi: Limit block count to 16-bit for old revisions
- sdhci-omap: Fixup support for read-only pins
- mxcmmc: Revert support for highmem pages
- davinci/pxamci: Fix clang build warnings"
* tag 'mmc-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: renesas_sdhi: limit block count to 16 bit for old revisions
mmc: alcor: fix DMA reads
mmc: sdhci-omap: Set caps2 to indicate no physical write protect pin
mmc: mxcmmc: "Revert mmc: mxcmmc: handle highmem pages"
mmc: davinci: remove extraneous __init annotation
mmc: pxamci: fix enum type confusion
|
|
"sbitmap_batch_clear" should be "sbitmap_deferred_clear"
Acked-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rename intel_find_panel_downclock() to intel_panel_edid_downclock_mode()
to make it clear it's looking for the downclock mode in the EDID.
And while at it polish the implementation a bit as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321132446.22394-6-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
Utilize drm_mode_match() instead of hand rolling it when
looking for the DRRS downclock mode.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321132446.22394-5-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
DSI has its own convoluted way of grabbing the fixed mode from
the VBT. Change it to follow the path laid out by LVDS/eDP.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321132446.22394-4-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
LVDS and eDP have essentially the same code for grabbing the
fixed mode from VBT. Pull that code to a common location.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321132446.22394-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
preferred mode
Some monitors apparently forget to mark any mode as preferred in the
EDID. In this particular case we have a very generic looking ID
"PNP Model 0 Serial Number 4" / "LVDS 800x600" so a specific quirk
doesn't seem particularly wise. Also the quirk we have
(EDID_QUIRK_FIRST_DETAILED_PREFERRED) is actually defunct so we'd
have to fix it first.
When there is no preferred mode we currently fall back to the VBT.
That approach fails us here as the VBT mode is 1024x768 whereas
the panel resolution is 800x600. So instead of falling back to the
VBT when there is no preferred mode let's just pick the first
probed mode. Only if the EDID provided no modes we fall back to
the VBT.
For this machine the VBIOS would appear to select the 800x600
60Hz EST mode rather than the first detailed mode (which is
the new fallback will pick). The two modes differ only by
having opposite sync polarities, which does not seem to matter
to the panel in question.
v2: Make sure the probed_modes list is not empty
Cc: Adam Jackson <ajax@redhat.com>
Cc: Roberto Viola <cagnulein@gmail.com>
Tested-by: Roberto Viola <cagnulein@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109780
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321132446.22394-2-ville.syrjala@linux.intel.com
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
Both LVDS and eDP have the same code to look up the preferred mode
from the connector probed_modes list. Move the code to a common
location.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321132446.22394-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
I added the loop but neglected to actually pass the level to the
function. So we were just looping 8 times calculating the exact
same thing every time.
Fixes: df331de3f8aa ("drm/i915: Allocate enough DDB for the cursor")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321175128.32178-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Merge the forgotten cleanup patch for the new file, so the mess does not
propagate further.
|
|
an error
When building with -Wsometimes-uninitialized, Clang warns:
arch/x86/kernel/hw_breakpoint.c:355:2: warning: variable 'align' is used
uninitialized whenever switch default is taken
[-Wsometimes-uninitialized]
The default cannot be reached because arch_build_bp_info() initializes
hw->len to one of the specified cases. Nevertheless the warning is valid
and returning -EINVAL makes sure that this cannot be broken by future
modifications.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/392
Link: https://lkml.kernel.org/r/20190307212756.4648-1-natechancellor@gmail.com
|
|
Previously, our view has been always to run the engines independently
within a context. (Multiple engines happened before we had contexts and
timelines, so they always operated independently and that behaviour
persisted into contexts.) However, at the user level the context often
represents a single timeline (e.g. GL contexts) and userspace must
ensure that the individual engines are serialised to present that
ordering to the client (or forgot about this detail entirely and hope no
one notices - a fair ploy if the client can only directly control one
engine themselves ;)
In the next patch, we will want to construct a set of engines that
operate as one, that have a single timeline interwoven between them, to
present a single virtual engine to the user. (They submit to the virtual
engine, then we decide which engine to execute on based.)
To that end, we want to be able to create contexts which have a single
timeline (fence context) shared between all engines, rather than multiple
timelines.
v2: Move the specialised timeline ordering to its own function.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322092325.5883-4-chris@chris-wilson.co.uk
|
|
It can be useful to have a single ioctl to create a context with all
the initial parameters instead of a series of create + setparam + setparam
ioctls. This extension to create context allows any of the parameters
to be passed in as a linked list to be applied to the newly constructed
context.
v2: Make a local copy of user setparam (Tvrtko)
v3: Use flags to detect availability of extension interface
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322092325.5883-3-chris@chris-wilson.co.uk
|
|
In preparation to making the ppGTT binding for a context explicit (to
facilitate reusing the same ppGTT between different contexts), allow the
user to create and destroy named ppGTT.
v2: Replace global barrier for swapping over the ppgtt and tlbs with a
local context barrier (Tvrtko)
v3: serialise with struct_mutex; it's lazy but required dammit
v4: Rewrite igt_ctx_shared_exec to be more different (aimed to be more
similarly, turned out different!)
v5: Fix up test unwind for aliasing-ppgtt (snb)
v6: Tighten language for uapi struct drm_i915_gem_vm_control.
v7: Patch the context image for runtime ppgtt switching!
Testcase: igt/gem_vm_create
Testcase: igt/gem_ctx_param/vm
Testcase: igt/gem_ctx_clone/vm
Testcase: igt/gem_ctx_shared
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322092325.5883-2-chris@chris-wilson.co.uk
|
|
An idea for extending uABI inspired by Vulkan's extension chains.
Instead of expanding the data struct for each ioctl every time we need
to add a new feature, define an extension chain instead. As we add
optional interfaces to control the ioctl, we define a new extension
struct that can be linked into the ioctl data only when required by the
user. The key advantage being able to ignore large control structs for
optional interfaces/extensions, while being able to process them in a
consistent manner.
In comparison to other extensible ioctls, the key difference is the
use of a linked chain of extension structs vs an array of tagged
pointers. For example,
struct drm_amdgpu_cs_chunk {
__u32 chunk_id;
__u32 length_dw;
__u64 chunk_data;
};
struct drm_amdgpu_cs_in {
__u32 ctx_id;
__u32 bo_list_handle;
__u32 num_chunks;
__u32 _pad;
__u64 chunks;
};
allows userspace to pass in array of pointers to extension structs, but
must therefore keep constructing that array along side the command stream.
In dynamic situations like that, a linked list is preferred and does not
similar from extra cache line misses as the extension structs themselves
must still be loaded separate to the chunks array.
v2: Apply the tail call optimisation directly to nip the worry of stack
overflow in the bud.
v3: Defend against recursion.
v4: Fixup local types to match new uabi
Opens:
- do we include the result as an out-field in each chain?
struct i915_user_extension {
__u64 next_extension;
__u64 name;
__s32 result;
__u32 mbz; /* reserved for future use */
};
* Undecided, so provision some room for future expansion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322092325.5883-1-chris@chris-wilson.co.uk
|
|
sparse complains:
CHECK kernel/watchdog.c
kernel/watchdog.c:45:19: warning: symbol 'nmi_watchdog_available'
was not declared. Should it be static?
kernel/watchdog.c:47:16: warning: symbol 'watchdog_allowed_mask'
was not declared. Should it be static?
They're not referenced by name from anyplace else, make them static.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/7855.1552383228@turing-police
|
|
sparse complains:
CHECK kernel/time/jiffies.c
kernel/time/jiffies.c:92:20: warning: symbol 'refined_jiffies' was not
declared. Should it be static?
Its only used in file scope. Make it static.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/32342.1552379915@turing-police
|
|
Building with 'make W=1' complains:
CC kernel/irq/devres.o
kernel/irq/devres.c:104: warning: Excess function parameter 'thread_fn'
description in 'devm_request_any_context_irq'
Remove it.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/31207.1552378676@turing-police
|
|
With 'make C=2 W=1', sparse and gcc both complain:
CHECK arch/x86/mm/pti.c
arch/x86/mm/pti.c:84:3: warning: symbol 'pti_mode' was not declared. Should it be static?
arch/x86/mm/pti.c:605:6: warning: symbol 'pti_set_kernel_image_nonglobal' was not declared. Should it be static?
CC arch/x86/mm/pti.o
arch/x86/mm/pti.c:605:6: warning: no previous prototype for 'pti_set_kernel_image_nonglobal' [-Wmissing-prototypes]
605 | void pti_set_kernel_image_nonglobal(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
pti_set_kernel_image_nonglobal() is only used locally. 'pti_mode' exists in
drivers/hwtracing/intel_th/pti.c as well, but it's a completely unrelated
local (static) symbol.
Make both static.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/27680.1552376873@turing-police
|
|
The futex code requires that the user space addresses of futexes are 32bit
aligned. sys_futex() checks this in futex_get_keys() but the robust list
code has no alignment check in place.
As a consequence the kernel crashes on architectures with strict alignment
requirements in handle_futex_death() when trying to cmpxchg() on an
unaligned futex address which was retrieved from the robust list.
[ tglx: Rewrote changelog, proper sizeof() based alignement check and add
comment ]
Fixes: 0771dfefc9e5 ("[PATCH] lightweight robust futexes: core")
Signed-off-by: Chen Jie <chenjie6@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <dvhart@infradead.org>
Cc: <peterz@infradead.org>
Cc: <zengweilin@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1552621478-119787-1-git-send-email-chenjie6@huawei.com
|
|
The driver sets a default domain id (FLPT_DEFAULT_DID) in the
first level only pasid entry, but saves a different domain id
in @sdev->did. The value saved in @sdev->did will be used to
invalidate the translation caches. Hence, the driver might
result in invalidating the caches with a wrong domain id.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Fixes: 1c4f88b7f1f92 ("iommu/vt-d: Shared virtual address in scalable mode")
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The spec states in 10.4.16 that the Protected Memory Enable
Register should be treated as read-only for implementations
not supporting protected memory regions (PLMR and PHMR fields
reported as Clear in the Capability register).
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: mark gross <mgross@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Fixes: f8bab73515ca5 ("intel-iommu: PMEN support")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
If a 32 bit allocation request is too big to possibly succeed, it
early exits with a failure and then should never update max32_alloc_
size. This patch fixes current code, now the size is only updated if
the slow path failed while walking the tree. Without the fix the
allocation may enter the slow path again even if there was a failure
before of a request with the same or a smaller size.
Cc: <stable@vger.kernel.org> # 4.20+
Fixes: bee60e94a1e2 ("iommu/iova: Optimise attempts to allocate iova from 32bit address range")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
* pm-domains:
PM / Domains: Avoid a potential deadlock
|
|
Adding a call to intel_uc_suspend in i915_gem_suspend, which
is a common point for the suspend/resume and hibernate paths.
This fixes an unbalanced call that causes issues with the CTB
register/deregister.
v2: Making the call unconditional (Daniele)
Moving the call to after the GEM_BUG_ON (Chris)
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321203804.6845-1-sujaritha.sundaresan@intel.com
|
|
Use the igt_live_test framework for detecting whether an unwanted hang
occurred during test execution, and report failure if it does.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321194031.20240-2-chris@chris-wilson.co.uk
|
|
32 is too many for the likes of kbl, and in order to insert that many
requests into the ring requires us to declare the first few hung --
understandably a slow and unexpected process. Instead, measure the size
of a singe requests and use that to estimate the upper bound on the
chain length we can use for our test, remembering to flush the previous
chain between tests for safety.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: "Yokoyama, Caz" <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321194031.20240-1-chris@chris-wilson.co.uk
|
|
Pull drm fixes from Dave Airlie:
"i915, amdgpu, vmwgfx, exynos, nouveau and udl fixes.
Seems to be lots of little minor ones for regressions in rc1, and some
cleanups. The exynos one is the largest one, and is for a hw
difference between exynos versions"
* tag 'drm-fixes-2019-03-22' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/dmem: empty chunk do not have a buffer object associated with them.
drm/nouveau/debugfs: Fix check of pm_runtime_get_sync failure
drm/nouveau/dmem: Fix a NULL vs IS_ERR() check
drm/nouveau/dmem: remove set but not used variable 'drm'
drm/exynos/mixer: fix MIXER shadow registry synchronisation code
drm/vmwgfx: Don't double-free the mode stored in par->set_mode
drm/vmwgfx: Return 0 when gmrid::get_node runs out of ID's
drm/amdgpu: fix invalid use of change_bit
drm/amdgpu: revert "cleanup setting bulk_movable"
drm/i915: Sanity check mmap length against object size
drm/i915: Fix off-by-one in reporting hanging process
drm/i915/bios: assume eDP is present on port A when there is no VBT
drm/udl: use drm_gem_object_put_unlocked.
|
|
into drm-fixes
- Parially revert a bulk move clean up change to fix a ref count bug
- Fix invalid use of change_bit that caused a crash on PPC64 and ARM64
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321020933.3508-1-alexander.deucher@amd.com
|
|
git://people.freedesktop.org/~thomash/linux into drm-fixes
Two fixes CC'd stable. One fix for a long-standing a bit hard-to-trigger fbdev
modesetting bug and one out-of-bo-id fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321112026.114328-1-thellstrom@vmware.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
- Fix page fault issue at Mixer device
. This patch fixes the page fault issue by correcting sychronization
method for updating shadow registers for Mixer device.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1553162223-10090-1-git-send-email-inki.dae@samsung.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
A protection on our mmap against attempts to map past the end of the object;
plus a fix off-by-one in our hang report and a protection;
and a fix for eDP panels on Gen9 platforms on VBT absence.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190320201451.GA7993@intel.com
|
|
Some minor nouveau dmem and other fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA==kMkD6n-cS9KpQBcTU1E8p7Wc+H1ZuOhSfD7yTFJVvkw@mail.gmail.com
|
|
Empty chunk do not have a bo associated with them so no need to pin/unpin
on suspend/resume.
This fix suspend/resume on 5.1rc1 when NOUVEAU_SVM is enabled.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
pm_runtime_get_sync returns negative on failure.
Fixes: eaeb9010bb4b ("drm/nouveau/debugfs: Wake up GPU before doing any reclocking")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The hmm_devmem_add() function doesn't return NULL, it returns error
pointers.
Fixes: 5be73b690875 ("drm/nouveau/dmem: device memory helpers for SVM")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/nouveau/nouveau_dmem.c: In function 'nouveau_dmem_free':
drivers/gpu/drm/nouveau/nouveau_dmem.c:103:22: warning:
variable 'drm' set but not used [-Wunused-but-set-variable]
struct nouveau_drm *drm;
^
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Mostly fixes apart from the kprobe blacklist checking which was
deferred because of conflicting with a fix merged after I pinned the
arm64 for-next/core branch (f2b3d8566d81 "arm64: kprobe: Always
blacklist the KVM world-switch code").
Summary:
- Update the kprobe blacklist checking for arm64. This was supposed
to be queued during the merging window but, due to conflicts, it
was deferred post -rc1
- Extend the Fujitsu erratum 010001 workaround to A64FX v1r0
- Whitelist HiSilicon Taishan v110 CPUs as not susceptible to
Meltdown
- Export save_stack_trace_regs()
- Remove obsolete selection of MULTI_IRQ_HANDLER"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: remove obsolete selection of MULTI_IRQ_HANDLER
arm64: kpti: Whitelist HiSilicon Taishan v110 CPUs
arm64: Add MIDR encoding for HiSilicon Taishan CPUs
arm64/stacktrace: Export save_stack_trace_regs()
arm64: apply workaround on A64FX v1r0
arm64: kprobes: Use arch_populate_kprobe_blacklist()
arm64: kprobes: Move exception_text check in blacklist
arm64: kprobes: Remove unneeded RODATA check
arm64: kprobes: Move extable address check into arch_prepare_kprobe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"Another small SELinux fix for v5.1"
* tag 'selinux-pr-20190321' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix NULL dereference in policydb_destroy()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull udf fixes from Jan Kara:
"Two udf error handling fixes"
* tag 'fixes_for_v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Propagate errors from udf_truncate_extents()
udf: Fix crash on IO error during truncate
|
|
If we are already in the desired write domain of a set-domain ioctl,
then there is nothing for us to do and we can quickly return back to
userspace, avoiding any lock contention. By recognising that the
write_domain is always a subset of the read_domains, and excluding the
no-op case of requiring 0 read_domains in the ioctl, we can infer if the
current write_domain matches the target read_domains, there is nothing
for us to do.
Secondary aspect of this is that we undo the arbitrary fetching and
potential flushing of all pages for a set-domain(.write=CPU) call on a
fresh object -- which was introduced simply because we do the get-pages
before taking the struct_mutex.
References: 40e62d5d6be8 ("drm/i915: Acquire the backing storage outside of struct_mutex in set-domain")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321161908.8007-2-chris@chris-wilson.co.uk
|
|
When we return pages to the system, we ensure that they are marked as
being in the CPU domain since any external access is uncontrolled and we
must assume the worst. This means that we need to always flush the pages
on acquisition if we need to use them on the GPU, and from the beginning
have used set-domain. Set-domain is overkill for the purpose as it is a
general synchronisation barrier, but our intent is to only flush the
pages being swapped in. If we move that flush into the pages acquisition
phase, we know then that when we have obj->mm.pages, they are coherent
with the GPU and need only maintain that status without resorting to
heavy handed use of set-domain.
The principle knock-on effect for userspace is through mmap-gtt
pagefaulting. Our uAPI has always implied that the GTT mmap was async
(especially as when any pagefault occurs is unpredicatable to userspace)
and so userspace had to apply explicit domain control itself
(set-domain). However, swapping is transparent to the kernel, and so on
first fault we need to acquire the pages and make them coherent for
access through the GTT. Our use of set-domain here leaks into the uABI
that the first pagefault was synchronous. This is unintentional and
baring a few igt should be unoticed, nevertheless we bump the uABI
version for mmap-gtt to reflect the change in behaviour.
Another implication of the change is that gem_create() is presumed to
create an object that is coherent with the CPU and is in the CPU write
domain, so a set-domain(CPU) following a gem_create() would be a minor
operation that merely checked whether we could allocate all pages for
the object. On applying this change, a set-domain(CPU) causes a clflush
as we acquire the pages. This will have a small impact on mesa as we move
the clflush here on !llc from execbuf time to create, but that should
have minimal performance impact as the same clflush exists but is now
done early and because of the clflush issue, userspace recycles bo and
so should resist allocating fresh objects.
Internally, the presumption that objects are created in the CPU
write-domain and remain so through writes to obj->mm.mapping is more
prevalent than I expected; but easy enough to catch and apply a manual
flush.
For the future, we should push the page flush from the central
set_pages() into the callers so that we can more finely control when it
is applied, but for now doing it one location is easier to validate, at
the cost of sometimes flushing when there is no need.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321161908.8007-1-chris@chris-wilson.co.uk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fixes from Jan Kara:
"One inotify and one fanotify fix"
* tag 'fsnotify_for_v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: Allow copying of file handle to userspace
inotify: Fix fsnotify_mark refcount leak in inotify_update_existing_watch()
|
|
The timeline->name is only used for convenience in pretty printing the
i915_request.fence->ops->get_timeline_name() and it is just as
convenient to pull it from the gem_context directly. The few instances
of its use inside GEM_TRACE() has proven more of a nuisance than
helpful, so not worth saving imo.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321140711.11190-4-chris@chris-wilson.co.uk
|
|
The user_handle need only be known by userspace for it to lookup the
context via the idr; internally we have no use for it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321140711.11190-3-chris@chris-wilson.co.uk
|
