| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- corsair-cpro: Validate the size of the received input buffer
- ina238: Report energy in microjoules as expected by the ABI
- pmbus/ucd9000: Fixed GPIO functionality
* tag 'hwmon-for-v6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/ucd9000) Fix error in ucd9000_gpio_set
hwmon: (ina238) Report energy in microjoules
hwmon: (corsair-cpro) Validate the size of the received input buffer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix build and modpost confusion for the upcoming Rust 1.89.0
release
- Clean objtool warning for the upcoming Rust 1.89.0 release by
adding one more noreturn function
'kernel' crate:
- Fix build error when using generics in the 'try_{,pin_}init!'
macros"
* tag 'rust-fixes-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: use `#[used(compiler)]` to fix build and `modpost` with Rust >= 1.89.0
objtool/rust: add one more `noreturn` Rust function for Rust 1.89.0
rust: init: Fix generics in *_init! macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a memory leak in fcntl_dirnotify()
- Raise SB_I_NOEXEC on secrement superblock instead of messing with
flags on the mount
- Add fsdevel and block mailing lists to uio entry. We had a few
instances were very questionable stuff was added without either block
or the VFS being aware of it
- Fix netfs copy-to-cache so that it performs collection with
ceph+fscache
- Fix netfs race between cache write completion and ALL_QUEUED being
set
- Verify the inode mode when loading entries from disk in isofs
- Avoid state_lock in iomap_set_range_uptodate()
- Fix PIDFD_INFO_COREDUMP check in PIDFD_GET_INFO ioctl
- Fix the incorrect return value in __cachefiles_write()
* tag 'vfs-6.16-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
MAINTAINERS: add block and fsdevel lists to iov_iter
netfs: Fix race between cache write completion and ALL_QUEUED being set
netfs: Fix copy-to-cache so that it performs collection with ceph+fscache
fix a leak in fcntl_dirnotify()
iomap: avoid unnecessary ifs_set_range_uptodate() with locks
isofs: Verify inode mode when loading from disk
cachefiles: Fix the incorrect return value in __cachefiles_write()
secretmem: use SB_I_NOEXEC
coredump: fix PIDFD_INFO_COREDUMP ioctl check
|
|
Pull smb client fixes from Steve French:
- fix creating special files to Samba when using SMB3.1.1 POSIX
Extensions
- fix incorrect caching on new file creation with directory leases
enabled
- two use after free fixes: one in oplock_break and one in async
decryption
* tag 'v6.16-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
Fix SMB311 posix special file creation to servers which do not advertise reparse support
smb: invalidate and close cached directory when creating child entries
smb: client: fix use-after-free in crypt_message when using async crypto
smb: client: fix use-after-free in cifs_oplock_break
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes buffer overflows in qat and chelsio"
* tag 'v6.16-p7' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: qat - Use crypto_shash_export_core
crypto: chelsio - Use crypto_shash_export_core
|
|
Tariq Toukan says:
====================
mlx5 misc fixes 2025-07-17
This small patchset provides misc bug fixes from the team to the mlx5
driver.
====================
Link: https://patch.msgid.link/1752753970-261832-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the original design, it is assumed local and peer eswitches have the
same number of vfs. However, in new firmware, local and peer eswitches
can have different number of vfs configured by mlxconfig. In such
configuration, it is incorrect to derive the number of vfs from the
local device's eswitch.
Fix this by updating the peer miss rules add and delete functions to use
the peer device's eswitch and vf count instead of the local device's
information, ensuring correct behavior regardless of vf configuration
differences.
Fixes: ac004b832128 ("net/mlx5e: E-Switch, Add peer miss rules")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1752753970-261832-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If cmd_exec() is called with callback and mlx5_cmd_invoke() returns an
error, resources allocated in cmd_exec() will not be freed.
Fix the code to release the resources if mlx5_cmd_invoke() returns an
error.
Fixes: f086470122d5 ("net/mlx5: cmdif, Return value improvements")
Reported-by: Alex Tereshkin <atereshkin@nvidia.com>
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1752753970-261832-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixes overlapping buffer allocation for ICSSG peripheral
used for storing packets to be received/transmitted.
There are 3 buffers:
1. Buffer for Locally Injected Packets
2. Buffer for Forwarding Packets
3. Buffer for Host Egress Packets
In existing allocation buffers for 2. and 3. are overlapping causing
packet corruption.
Packet corruption observations:
During tcp iperf testing, due to overlapping buffers the received ack
packet overwrites the packet to be transmitted. So, we see packets on
wire with the ack packet content inside the content of next TCP packet
from sender device.
Details for AM64x switch mode:
-> Allocation by existing driver:
+---------+-------------------------------------------------------------+
| | SLICE 0 | SLICE 1 |
| +------+--------------+--------+------+--------------+--------+
| | Slot | Base Address | Size | Slot | Base Address | Size |
|---------+------+--------------+--------+------+--------------+--------+
| | 0 | 70000000 | 0x2000 | 0 | 70010000 | 0x2000 |
| | 1 | 70002000 | 0x2000 | 1 | 70012000 | 0x2000 |
| | 2 | 70004000 | 0x2000 | 2 | 70014000 | 0x2000 |
| FWD | 3 | 70006000 | 0x2000 | 3 | 70016000 | 0x2000 |
| Buffers | 4 | 70008000 | 0x2000 | 4 | 70018000 | 0x2000 |
| | 5 | 7000A000 | 0x2000 | 5 | 7001A000 | 0x2000 |
| | 6 | 7000C000 | 0x2000 | 6 | 7001C000 | 0x2000 |
| | 7 | 7000E000 | 0x2000 | 7 | 7001E000 | 0x2000 |
+---------+------+--------------+--------+------+--------------+--------+
| | 8 | 70020000 | 0x1000 | 8 | 70028000 | 0x1000 |
| | 9 | 70021000 | 0x1000 | 9 | 70029000 | 0x1000 |
| | 10 | 70022000 | 0x1000 | 10 | 7002A000 | 0x1000 |
| Our | 11 | 70023000 | 0x1000 | 11 | 7002B000 | 0x1000 |
| LI | 12 | 00000000 | 0x0 | 12 | 00000000 | 0x0 |
| Buffers | 13 | 00000000 | 0x0 | 13 | 00000000 | 0x0 |
| | 14 | 00000000 | 0x0 | 14 | 00000000 | 0x0 |
| | 15 | 00000000 | 0x0 | 15 | 00000000 | 0x0 |
+---------+------+--------------+--------+------+--------------+--------+
| | 16 | 70024000 | 0x1000 | 16 | 7002C000 | 0x1000 |
| | 17 | 70025000 | 0x1000 | 17 | 7002D000 | 0x1000 |
| | 18 | 70026000 | 0x1000 | 18 | 7002E000 | 0x1000 |
| Their | 19 | 70027000 | 0x1000 | 19 | 7002F000 | 0x1000 |
| LI | 20 | 00000000 | 0x0 | 20 | 00000000 | 0x0 |
| Buffers | 21 | 00000000 | 0x0 | 21 | 00000000 | 0x0 |
| | 22 | 00000000 | 0x0 | 22 | 00000000 | 0x0 |
| | 23 | 00000000 | 0x0 | 23 | 00000000 | 0x0 |
+---------+------+--------------+--------+------+--------------+--------+
--> here 16, 17, 18, 19 overlapping with below express buffer
+-----+-----------------------------------------------+
| | SLICE 0 | SLICE 1 |
| +------------+----------+------------+----------+
| | Start addr | End addr | Start addr | End addr |
+-----+------------+----------+------------+----------+
| EXP | 70024000 | 70028000 | 7002C000 | 70030000 | <-- Overlapping
| PRE | 70030000 | 70033800 | 70034000 | 70037800 |
+-----+------------+----------+------------+----------+
+---------------------+----------+----------+
| | SLICE 0 | SLICE 1 |
+---------------------+----------+----------+
| Default Drop Offset | 00000000 | 00000000 | <-- Field not configured
+---------------------+----------+----------+
-> Allocation this patch brings:
+---------+-------------------------------------------------------------+
| | SLICE 0 | SLICE 1 |
| +------+--------------+--------+------+--------------+--------+
| | Slot | Base Address | Size | Slot | Base Address | Size |
|---------+------+--------------+--------+------+--------------+--------+
| | 0 | 70000000 | 0x2000 | 0 | 70040000 | 0x2000 |
| | 1 | 70002000 | 0x2000 | 1 | 70042000 | 0x2000 |
| | 2 | 70004000 | 0x2000 | 2 | 70044000 | 0x2000 |
| FWD | 3 | 70006000 | 0x2000 | 3 | 70046000 | 0x2000 |
| Buffers | 4 | 70008000 | 0x2000 | 4 | 70048000 | 0x2000 |
| | 5 | 7000A000 | 0x2000 | 5 | 7004A000 | 0x2000 |
| | 6 | 7000C000 | 0x2000 | 6 | 7004C000 | 0x2000 |
| | 7 | 7000E000 | 0x2000 | 7 | 7004E000 | 0x2000 |
+---------+------+--------------+--------+------+--------------+--------+
| | 8 | 70010000 | 0x1000 | 8 | 70050000 | 0x1000 |
| | 9 | 70011000 | 0x1000 | 9 | 70051000 | 0x1000 |
| | 10 | 70012000 | 0x1000 | 10 | 70052000 | 0x1000 |
| Our | 11 | 70013000 | 0x1000 | 11 | 70053000 | 0x1000 |
| LI | 12 | 00000000 | 0x0 | 12 | 00000000 | 0x0 |
| Buffers | 13 | 00000000 | 0x0 | 13 | 00000000 | 0x0 |
| | 14 | 00000000 | 0x0 | 14 | 00000000 | 0x0 |
| | 15 | 00000000 | 0x0 | 15 | 00000000 | 0x0 |
+---------+------+--------------+--------+------+--------------+--------+
| | 16 | 70014000 | 0x1000 | 16 | 70054000 | 0x1000 |
| | 17 | 70015000 | 0x1000 | 17 | 70055000 | 0x1000 |
| | 18 | 70016000 | 0x1000 | 18 | 70056000 | 0x1000 |
| Their | 19 | 70017000 | 0x1000 | 19 | 70057000 | 0x1000 |
| LI | 20 | 00000000 | 0x0 | 20 | 00000000 | 0x0 |
| Buffers | 21 | 00000000 | 0x0 | 21 | 00000000 | 0x0 |
| | 22 | 00000000 | 0x0 | 22 | 00000000 | 0x0 |
| | 23 | 00000000 | 0x0 | 23 | 00000000 | 0x0 |
+---------+------+--------------+--------+------+--------------+--------+
+-----+-----------------------------------------------+
| | SLICE 0 | SLICE 1 |
| +------------+----------+------------+----------+
| | Start addr | End addr | Start addr | End addr |
+-----+------------+----------+------------+----------+
| EXP | 70018000 | 7001C000 | 70058000 | 7005C000 |
| PRE | 7001C000 | 7001F800 | 7005C000 | 7005F800 |
+-----+------------+----------+------------+----------+
+---------------------+----------+----------+
| | SLICE 0 | SLICE 1 |
+---------------------+----------+----------+
| Default Drop Offset | 7001F800 | 7005F800 |
+---------------------+----------+----------+
Rootcause: missing buffer configuration for Express frames in
function: prueth_fw_offload_buffer_setup()
Details:
Driver implements two distinct buffer configuration functions that are
invoked based on the driver state and ICSSG firmware:-
- prueth_fw_offload_buffer_setup()
- prueth_emac_buffer_setup()
During initialization, driver creates standard network interfaces
(netdevs) and configures buffers via prueth_emac_buffer_setup().
This function properly allocates and configures all required memory
regions including:
- LI buffers
- Express packet buffers
- Preemptible packet buffers
However, when the driver transitions to an offload mode (switch/HSR/PRP),
buffer reconfiguration is handled by prueth_fw_offload_buffer_setup().
This function does not reconfigure the buffer regions required for
Express packets, leading to incorrect buffer allocation.
Fixes: abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
Signed-off-by: Himanshu Mittal <h-mittal1@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250717094220.546388-1-h-mittal1@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The fsl_mc_get_endpoint() function uses device_find_child() for
localization, which implicitly calls get_device() to increment the
device's reference count before returning the pointer. However, the
caller dpaa2_switch_port_connect_mac() fails to properly release this
reference in multiple scenarios. We should call put_device() to
decrement reference count properly.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 84cba72956fd ("dpaa2-switch: integrate the MAC endpoint support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250717022309.3339976-3-make24@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The fsl_mc_get_endpoint() function uses device_find_child() for
localization, which implicitly calls get_device() to increment the
device's reference count before returning the pointer. However, the
caller dpaa2_eth_connect_mac() fails to properly release this
reference in multiple scenarios. We should call put_device() to
decrement reference count properly.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250717022309.3339976-2-make24@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The fsl_mc_get_endpoint() function may call fsl_mc_device_lookup()
twice, which would increment the device's reference count twice if
both lookups find a device. This could lead to a reference count leak.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 1ac210d128ef ("bus: fsl-mc: add the fsl_mc_get_endpoint function")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 8567494cebe5 ("bus: fsl-mc: rescan devices if endpoint not found")
Link: https://patch.msgid.link/20250717022309.3339976-1-make24@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- Three fixes for unnecessary spew: an ACPI CPPC boot-time debug
message, the link-time warnings for R_RISCV_NONE in binaries, and
some compile-time warnings in __put_user_nocheck
- A fix for a race during text patching
- Interrupts are no longer disabled during exception handling
- A fix for a missing sign extension in the misaligned load handler
- A fix to avoid static ftrace being selected in Kconfig, as we have
moved to dynamic ftrace
* tag 'riscv-for-linus-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: uaccess: Fix -Wuninitialized and -Wshadow in __put_user_nocheck
riscv: Stop supporting static ftrace
riscv: traps_misaligned: properly sign extend value in misaligned load handler
riscv: Enable interrupt during exception handling
riscv: ftrace: Properly acquire text_mutex to fix a race condition
ACPI: RISC-V: Remove unnecessary CPPC debug message
riscv: Stop considering R_RISCV_NONE as bad relocations
|
|
We have observed kernel panics when using timerlat with stack saving,
with the following dmesg output:
memcpy: detected buffer overflow: 88 byte write of buffer size 0
WARNING: CPU: 2 PID: 8153 at lib/string_helpers.c:1032 __fortify_report+0x55/0xa0
CPU: 2 UID: 0 PID: 8153 Comm: timerlatu/2 Kdump: loaded Not tainted 6.15.3-200.fc42.x86_64 #1 PREEMPT(lazy)
Call Trace:
<TASK>
? trace_buffer_lock_reserve+0x2a/0x60
__fortify_panic+0xd/0xf
__timerlat_dump_stack.cold+0xd/0xd
timerlat_dump_stack.part.0+0x47/0x80
timerlat_fd_read+0x36d/0x390
vfs_read+0xe2/0x390
? syscall_exit_to_user_mode+0x1d5/0x210
ksys_read+0x73/0xe0
do_syscall_64+0x7b/0x160
? exc_page_fault+0x7e/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
__timerlat_dump_stack() constructs the ftrace stack entry like this:
struct stack_entry *entry;
...
memcpy(&entry->caller, fstack->calls, size);
entry->size = fstack->nr_entries;
Since commit e7186af7fb26 ("tracing: Add back FORTIFY_SOURCE logic to
kernel_stack event structure"), struct stack_entry marks its caller
field with __counted_by(size). At the time of the memcpy, entry->size
contains garbage from the ringbuffer, which under some circumstances is
zero, triggering a kernel panic by buffer overflow.
Populate the size field before the memcpy so that the out-of-bounds
check knows the correct size. This is analogous to
__ftrace_trace_stack().
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Attila Fazekas <afazekas@redhat.com>
Link: https://lore.kernel.org/20250716143601.7313-1-tglozar@redhat.com
Fixes: e7186af7fb26 ("tracing: Add back FORTIFY_SOURCE logic to kernel_stack event structure")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix use of u64_replace_bits() in adjusting the guest's view of
MDCR_EL2.HPMN
RISC-V:
- Fix an issue related to timer cleanup when exiting to user-space
- Fix a race-condition in updating interrupts enabled for the guest
when IMSIC is hardware-virtualized
x86:
- Reject KVM_SET_TSC_KHZ for guests with a protected TSC (currently
only TDX)
- Ensure struct kvm_tdx_capabilities fields that are not explicitly
set by KVM are zeroed
Documentation:
- Explain how KVM contributions should be made testable
- Fix a formatting goof in the TDX documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: TDX: Don't report base TDVMCALLs
KVM: VMX: Ensure unused kvm_tdx_capabilities fields are zeroed out
KVM: Documentation: document how KVM is tested
KVM: Documentation: minimal updates to review-checklist.rst
KVM: x86: Reject KVM_SET_TSC_KHZ vCPU ioctl for TSC protected guest
RISC-V: KVM: Move HGEI[E|P] CSR access to IMSIC virtualization
RISC-V: KVM: Disable vstimecmp before exiting to user-space
Documentation: KVM: Fix unexpected unindent warning
KVM: arm64: Fix enforcement of upper bound on MDCR_EL2.HPMN
|
|
Pull io_uring fixes from Jens Axboe:
- dmabug offset fix for zcrx
- Fix for the POLLERR connect work around handling
* tag 'io_uring-6.16-20250718' of git://git.kernel.dk/linux:
io_uring/poll: fix POLLERR handling
io_uring/zcrx: disallow user selected dmabuf offset and size
|
|
Pull block fixes from Jens Axboe:
- NVMe changes via Christoph:
- revert the cross-controller atomic write size validation
that caused regressions (Christoph Hellwig)
- fix endianness of command word printout in
nvme_log_err_passthru() (John Garry)
- fix callback lock for TLS handshake (Maurizio Lombardi)
- fix misaccounting of nvme-mpath inflight I/O (Yu Kuai)
- fix inconsistent RCU list manipulation in
nvme_ns_add_to_ctrl_list() (Zheng Qixing)
- Fix for a kobject leak in queue unregistration
- Fix for loop async file write start/end handling
* tag 'block-6.16-20250718' of git://git.kernel.dk/linux:
loop: use kiocb helpers to fix lockdep warning
nvmet-tcp: fix callback lock for TLS handshake
nvme: fix misaccounting of nvme-mpath inflight I/O
nvme: revert the cross-controller atomic write size validation
nvme: fix endianness of command word prints in nvme_log_err_passthru()
nvme: fix inconsistent RCU list manipulation in nvme_ns_add_to_ctrl_list()
block: fix kobject leak in blk_unregister_queue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain / cpuidle-psci fixes from Ulf Hansson:
"pmdomain core:
- Respect CPU latency QoS limit in the genpd governor for CPUs
cpuidle-psci:
- Fix cpuhotplug support for PREEMPT_RT"
* tag 'pmdomain-v6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
cpuidle: psci: Fix cpuhotplug routine with PREEMPT_RT=y
pmdomain: governor: Consider CPU latency tolerance from pm_domain_cpu_gov
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix the devres release callback for devm_gpiod_put_array()
- add an ACPI quirk for Acer Nitro V15 suspend & wakeup
* tag 'gpio-fixes-for-v6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: devres: release GPIOs in devm_gpiod_put_array()
gpiolib: acpi: Add a quirk for Acer Nitro V15
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix handling of BPF arena relocations (Andrii Nakryiko)
- Fix race in bpf_arch_text_poke() on s390 (Ilya Leoshkevich)
- Fix use of virt_to_phys() on arm64 when mmapping BTF (Lorenz Bauer)
- Reject %p% format string in bprintf-like BPF helpers (Paul Chaignon)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
libbpf: Fix handling of BPF arena relocations
btf: Fix virt_to_phys() on arm64 when mmapping BTF
selftests/bpf: Stress test attaching a BPF prog to another BPF prog
s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL again
selftests/bpf: Add negative test cases for snprintf
bpf: Reject %p% format string in bprintf-like helpers
|
|
Pull drm fixes from Dave Airlie:
"Seems like a quiet enough week, xe/amdgpu being the usual suspects,
then mediatek with a few fixes, and otherwise just misc other bits.
dp:
- aux dpcd address fix
xe:
- SR-IOV fixes for GT reset and TLB invalidation
- Fix memory copy direction during migration
- Fix alignment check on migration
- Fix MOCS and page fault init order to correctly account
for topology
amdgpu:
- Fix a DC memory leak
- DCN 4.0.1 degamma LUT fix
- Fix reset counter handling for soft recovery
- GC 8 fix
radeon:
- Drop console locks when suspending/resuming
nouveau:
- ioctl validation fix
panfrost:
- scheduler bug fix
mediatek:
- Add wait_event_timeout when disabling plane
- only announce AFBC if really supported
- mtk_dpi: Reorder output formats on MT8195/88"
* tag 'drm-fixes-2025-07-18-1' of https://gitlab.freedesktop.org/drm/kernel:
drm/mediatek: mtk_dpi: Reorder output formats on MT8195/88
drm/mediatek: only announce AFBC if really supported
drm/mediatek: Add wait_event_timeout when disabling plane
drm/xe/pf: Resend PF provisioning after GT reset
drm/xe/pf: Prepare to stop SR-IOV support prior GT reset
drm/xe/migrate: Fix alignment check
drm/xe: Move page fault init after topology init
drm/xe/mocs: Initialize MOCS index early
drm/xe/migrate: fix copy direction in access_memory
drm/xe: Dont skip TLB invalidations on VF
drm/amdgpu/gfx8: reset compute ring wptr on the GPU on resume
drm/amdgpu: Increase reset counter only on success
drm/radeon: Do not hold console lock during resume
drm/radeon: Do not hold console lock while suspending clients
drm/amd/display: Disable CRTC degamma LUT for DCN401
drm/amd/display: Free memory allocation
drm/dp: Change AUX DPCD probe address from LANE0_1_STATUS to TRAINING_PATTERN_SET
drm/panfrost: Fix scheduler workqueue bug
drm/nouveau: check ioctl command codes better
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes again. The only change in the core is
about the handling of ALSA compress-offload ioctl numbers for avoiding
potential abusing the API (if any).
Other than that, all changes are device-specific small fixes and
quirks, which should be safe to apply"
* tag 'sound-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: amd: yc: Add DMI quirk for HP Laptop 17 cp-2033dx
ASoC: Intel: soc-acpi: add support for HP Omen14 ARL
ASoC: amd: yc: Add DMI entries to support HP 15-fb1xxx
ALSA: hda/realtek: Add quirk for ASUS ROG Strix G712LWS
ALSA: hda/cs35l56: Workaround bad dev-index on Lenovo Yoga Book 9i GenX
ALSA: hda/realtek: Support mute LED for Yoga with ALC287
ASoC: Intel: fix SND_SOC_SOF dependencies
ASoC: rt5660: Fix the dmic data source from GPIO2
ALSA: hda/realtek - Fix mute LED for HP Victus 16-r0xxx
ALSA: compress_offload: tighten ioctl command number checks
ASoC: Intel: avs: Fix NULL ptr deref on rmmod
ASoC: amd: yc: add DMI quirk for ASUS M6501RM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fixes from Vinod Koul:
"This contains a couple of amd driver fixes to handle alerts when the
link is down and the cmd status register clears up.
Also a revert of the qualcomm driver channel map support due to a
regression"
* tag 'soundwire-6.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: Revert "soundwire: qcom: Add set_channel_map api support"
soundwire: amd: fix for clearing command status register
soundwire: amd: fix for handling slave alerts after link is down
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- Mediatek flag reuse error fix
- Array overbound fix for nbpfaxi
- Frame size warning in driver probe
* tag 'dmaengine-fix-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dma: dw-edma: Fix build warning in dw_edma_pcie_probe()
dmaengine: nbpfaxi: Fix memory corruption in probe()
dmaengine: mediatek: Fix a flag reuse error in mtk_cqdma_tx_status()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
"Core:
- use per-PHY lockdep keys, in order to fix a phy using internal phys
Drivers:
- tegra:
- fixes for unbalanced regulator
- decouple pad calibration fix
- disable periodic updates
- qualcomm:
- error code fix for driver probe"
* tag 'phy-fix-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom: fix error code in snps_eusb2_hsphy_probe()
phy: use per-PHY lockdep keys
phy: tegra: xusb: Fix unbalanced regulator disable in UTMI PHY mode
phy: tegra: xusb: Disable periodic tracking on Tegra234
phy: tegra: xusb: Decouple CYA_TRK_CODE_UPDATE_ON_IDLE from trk_hw_mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC host:
- bcm2835: Fix dma_unmap_sg() nents value
- sdhci_am654: Add workaround for maximum HW timeout
- sdhci-pci: Disable broken CQE Intel GLK-based Positivo models
MEMSTICK:
- Zero initialize id_reg in h_memstick_read_dev_id()"
* tag 'mmc-v6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
memstick: core: Zero initialize id_reg in h_memstick_read_dev_id()
mmc: bcm2835: Fix dma_unmap_sg() nents value
mmc: sdhci_am654: Workaround for Errata i2312
mmc: sdhci-pci: Quirk for broken command queuing on Intel GLK-based Positivo models
|
|
reparse support
Some servers (including Samba), support the SMB3.1.1 POSIX Extensions (which use reparse
points for handling special files) but do not properly advertise file system attribute
FILE_SUPPORTS_REPARSE_POINTS. Although we don't check for this attribute flag when
querying special file information, we do check it when creating special files which
causes them to fail unnecessarily. If we have negotiated SMB3.1.1 POSIX Extensions
with the server we can expect the server to support creating special files via
reparse points, and even if the server fails the operation due to really forbidding
creating special files, then it should be no problem and is more likely to return a
more accurate rc in any case (e.g. EACCES instead of EOPNOTSUPP).
Allow creating special files as long as the server supports either reparse points
or the SMB3.1.1 POSIX Extensions (note that if the "sfu" mount option is specified
it uses a different way of storing special files that does not rely on reparse points).
Cc: <stable@vger.kernel.org>
Fixes: 6c06be908ca19 ("cifs: Check if server supports reparse points before using them")
Acked-by: Ralph Boehme <slow@samba.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull xfs fixes from Carlos Maiolino:
"This contains mostly code clean up, refactoring and comments
modification.
The most important patch in this series is the last one that removes
an unnecessary data structure allocation of xfs busy extents which
might lead to a memory leak on the zoned allocator code"
* tag 'xfs-fixes-6.16-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't allocate the xfs_extent_busy structure for zoned RTGs
xfs: remove the bt_bdev_file buftarg field
xfs: rename the bt_bdev_* buftarg fields
xfs: refactor xfs_calc_atomic_write_unit_max
xfs: add a xfs_group_type_buftarg helper
xfs: remove the call to sync_blockdev in xfs_configure_buftarg
xfs: clean up the initial read logic in xfs_readsb
xfs: replace strncpy with memcpy in xattr listing
|
|
The GPIO output functionality does not work as intended.
The ucd9000_gpio_set function should set UCD9000_GPIO_CONFIG_OUT_VALUE
(bit 2) in order to change the output value of the selected GPIO.
Instead UCD9000_GPIO_CONFIG_STATUS (bit 3) is set, but this is a
read-only value. This patch fixes the mistake and provides the intended
functionality of the GPIOs.
See UCD90xxx Sequencer and System Health Controller PMBus Command SLVU352C
section 10.43 for reference.
Signed-off-by: Torben Nielsen <t8927095@gmail.com>
Link: https://lore.kernel.org/r/20250718093644.356085-2-t8927095@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The hwmon sysfs interface specifies that energy values should be
reported in microjoules. This is also what tools such as lmsensors
expect, reporting wrong values otherwise.
Adjust the driver to scale the output accordingly and adjust ina238
driver documentation.
Fixes: 6daaf15a1173 ("hwmon: (ina238) Add support for SQ52206")
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://lore.kernel.org/r/20250715-hwmon-ina238-microjoules-v1-1-9df678568a41@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Pull bcachefs fixes from Kent Overstreet:
- two small syzbot fixes
- fix discard behaviour regression; we no longer wait until the number
of buckets needing discard is greater than the number of buckets
available before kicking off discards
- fix a fast_list leak when async object debugging is enabled
- fixes for casefolding when CONFIG_UTF8 != y
* tag 'bcachefs-2025-07-17' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix bch2_maybe_casefold() when CONFIG_UTF8=n
bcachefs: Fix build when CONFIG_UNICODE=n
bcachefs: Fix reference to invalid bucket in copygc
bcachefs: Don't build aux search tree when still repairing node
bcachefs: Tweak threshold for allocator triggering discards
bcachefs: Fix triggering of discard by the journal path
bcachefs: io_read: remove from async obj list in rbio_done()
|
|
Busy extent tracking is primarily used to ensure that freed blocks are
not reused for data allocations before the transaction that deleted them
has been committed to stable storage, and secondarily to drive online
discard. None of the use cases applies to zoned RTGs, as the zoned
allocator can't overwrite blocks before resetting the zone, which already
flushes out all transactions touching the RTGs.
So the busy extent tracking is not needed for zoned RTGs, and also not
called for zoned RTGs. But somehow the code to skip allocating and
freeing the structure got lost during the zoned XFS upstreaming process.
This not only causes these structures to unnecessarily allocated, but can
also lead to memory leaks as the xg_busy_extents pointer in the
xfs_group structure is overlayed with the pointer for the linked list
of to be reset zones.
Stop allocating and freeing the structure to not pointlessly allocate
memory which is then leaked when the zone is reset.
Fixes: 080d01c41d44 ("xfs: implement zoned garbage collection")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org> # v6.15
[cem: Fix type and add stable tag]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.
Tested on my Victus 15-fa0xxx Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250717212625.366026-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Given mt8365_dai_set_priv allocate priv_size space to copy priv_data which
means we should pass mt8365_i2s_priv[i] or "struct mtk_afe_i2s_priv"
instead of afe_priv which has the size of "struct mt8365_afe_private".
Otherwise the KASAN complains about.
[ 59.389765] BUG: KASAN: global-out-of-bounds in mt8365_dai_set_priv+0xc8/0x168 [snd_soc_mt8365_pcm]
...
[ 59.394789] Call trace:
[ 59.395167] dump_backtrace+0xa0/0x128
[ 59.395733] show_stack+0x20/0x38
[ 59.396238] dump_stack_lvl+0xe8/0x148
[ 59.396806] print_report+0x37c/0x5e0
[ 59.397358] kasan_report+0xac/0xf8
[ 59.397885] kasan_check_range+0xe8/0x190
[ 59.398485] asan_memcpy+0x3c/0x98
[ 59.399022] mt8365_dai_set_priv+0xc8/0x168 [snd_soc_mt8365_pcm]
[ 59.399928] mt8365_dai_i2s_register+0x1e8/0x2b0 [snd_soc_mt8365_pcm]
[ 59.400893] mt8365_afe_pcm_dev_probe+0x4d0/0xdf0 [snd_soc_mt8365_pcm]
[ 59.401873] platform_probe+0xcc/0x228
[ 59.402442] really_probe+0x340/0x9e8
[ 59.402992] driver_probe_device+0x16c/0x3f8
[ 59.403638] driver_probe_device+0x64/0x1d8
[ 59.404256] driver_attach+0x1dc/0x4c8
[ 59.404840] bus_for_each_dev+0x100/0x190
[ 59.405442] driver_attach+0x44/0x68
[ 59.405980] bus_add_driver+0x23c/0x500
[ 59.406550] driver_register+0xf8/0x3d0
[ 59.407122] platform_driver_register+0x68/0x98
[ 59.407810] mt8365_afe_pcm_driver_init+0x2c/0xff8 [snd_soc_mt8365_pcm]
Fixes: 402bbb13a195 ("ASoC: mediatek: mt8365: Add I2S DAI support")
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250710011806.134507-1-guoqing.jiang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When processing mount options, efivarfs allocates efivarfs_fs_info (sfi)
early in fs_context initialization. However, sfi is associated with the
superblock and typically freed when the superblock is destroyed. If the
fs_context is released (final put) before fill_super is called—such as
on error paths or during reconfiguration—the sfi structure would leak,
as ownership never transfers to the superblock.
Implement the .free callback in efivarfs_context_ops to ensure any
allocated sfi is properly freed if the fs_context is torn down before
fill_super, preventing this memory leak.
Suggested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Fixes: 5329aa5101f73c ("efivarfs: Add uid/gid mount options")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
NeilBrown <neil@brown.name> says:
This series of patches for overlayfs is primarily focussed on preparing
for some proposed changes to directory locking. In the new scheme we
will lock individual dentries in a directory rather than the whole
directory.
ovl currently will sometimes lock a directory on the upper filesystem
and do a few different things while holding the lock. This is
incompatible with the new scheme.
This series narrows the region of code protected by the directory lock,
taking it multiple times when necessary. This theoretically open up the
possibilty of other changes happening on the upper filesytem between the
unlock and the lock. To some extent the patches guard against that by
checking the dentries still have the expect parent after retaking the
lock. In general, I think ovl would have trouble if upperfs were being
changed independantly, and I don't think the changes here increase the
problem in any important way.
After this series (with any needed changes) lands I will resubmit my
change to vfs_rmdir() behaviour to have it drop the lock on error. ovl
will be much better positioned to handle that change. It will come with
the new "lookup_and_lock" API that I am proposing.
* patches from https://lore.kernel.org/20250716004725.1206467-1-neil@brown.name: (21 commits)
ovl: rename ovl_cleanup_unlocked() to ovl_cleanup()
ovl: change ovl_create_real() to receive dentry parent
ovl: narrow locking in ovl_check_rename_whiteout()
ovl: narrow locking in ovl_whiteout()
ovl: change ovl_cleanup_and_whiteout() to take rename lock as needed
ovl: narrow locking on ovl_remove_and_whiteout()
ovl: change ovl_workdir_cleanup() to take dir lock as needed.
ovl: narrow locking in ovl_workdir_cleanup_recurse()
ovl: narrow locking in ovl_indexdir_cleanup()
ovl: narrow locking in ovl_workdir_create()
ovl: narrow locking in ovl_cleanup_index()
ovl: narrow locking in ovl_cleanup_whiteouts()
ovl: narrow locking in ovl_rename()
ovl: simplify gotos in ovl_rename()
ovl: narrow locking in ovl_create_over_whiteout()
ovl: narrow locking in ovl_clear_empty()
ovl: narrow locking in ovl_create_upper()
ovl: narrow the locked region in ovl_copy_up_workdir()
ovl: Call ovl_create_temp() without lock held.
ovl: change ovl_create_index() to take dir locks
...
Link: https://lore.kernel.org/20250716004725.1206467-1-neil@brown.name
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The only remaining user of ovl_cleanup() is ovl_cleanup_locked(), so we
no longer need both.
This patch renames ovl_cleanup() to ovl_cleanup_locked() and makes it
static.
ovl_cleanup_unlocked() is renamed to ovl_cleanup().
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/20250716004725.1206467-22-neil@brown.name
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Instead of passing an inode *dir, pass a dentry *parent. This makes the
calling slightly cleaner.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/20250716004725.1206467-21-neil@brown.name
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
ovl_check_rename_whiteout() now only holds the directory lock when
needed, and takes it again if necessary.
This makes way for future changes where locks are taken on individual
dentries rather than the whole directory.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/20250716004725.1206467-20-neil@brown.name
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
ovl_whiteout() relies on the workdir i_rwsem to provide exclusive access
to ofs->whiteout which it manipulates. Rather than depending on this,
add a new mutex, "whiteout_lock" to explicitly provide the required
locking. Use guard(mutex) for this so that we can return without
needing to explicitly unlock.
Then take the lock on workdir only when needed - to lookup the temp name
and to do the whiteout or link.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/20250716004725.1206467-19-neil@brown.name
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Rather than locking the directory(s) before calling
ovl_cleanup_and_whiteout(), change it (and ovl_whiteout()) to do the
locking, so the locking can be fine grained as will be needed for
proposed locking changes.
Sometimes this is called to whiteout something in the index dir, in
which case only that dir must be locked. In one case it is called on
something in an upperdir, so two directories must be locked. We use
ovl_lock_rename_workdir() for this and remove the restriction that
upperdir cannot be indexdir - because now sometimes it is.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/20250716004725.1206467-18-neil@brown.name
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This code:
performs a lookup_upper
creates a whiteout object
renames the whiteout over the result of the lookup
The create and the rename must be locked separately for proposed
directory locking changes. This patch takes a first step of moving the
lookup out of the locked region. A subsequent patch will separate the
create from the rename.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/20250716004725.1206467-17-neil@brown.name
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Rather than calling ovl_workdir_cleanup() with the dir already locked,
change it to take the dir lock only when needed.
Also change ovl_workdir_cleanup() to take a dentry for the parent rather
than an inode.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/20250716004725.1206467-16-neil@brown.name
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Only take the dir lock when needed, rather than for the whole loop.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/20250716004725.1206467-15-neil@brown.name
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Instead of taking the directory lock for the whole cleanup, only take it
when needed.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/20250716004725.1206467-14-neil@brown.name
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In ovl_workdir_create() don't hold the dir lock for the whole time, but
only take it when needed.
It now gets taken separately for ovl_workdir_cleanup(). A subsequent
patch will move the locking into that function.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/20250716004725.1206467-13-neil@brown.name
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
ovl_cleanup_index() takes a lock on the directory and then does a lookup
and possibly one of two different cleanups.
This patch narrows the locking to use the _unlocked() versions of the
lookup and one cleanup, and just takes the lock for the other cleanup.
A subsequent patch will take the lock into the cleanup.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/20250716004725.1206467-12-neil@brown.name
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Rather than lock the directory for the whole operation, use
ovl_lookup_upper_unlocked() and ovl_cleanup_unlocked() to take the lock
only when needed.
This makes way for future changes where locks are taken on individual
dentries rather than the whole directory.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/20250716004725.1206467-11-neil@brown.name
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Drop the rename lock immediately after the rename, and use
ovl_cleanup_unlocked() for cleanup.
This makes way for future changes where locks are taken on individual
dentries rather than the whole directory.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/20250716004725.1206467-10-neil@brown.name
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Rather than having three separate goto label: out_unlock, out_dput_old,
and out_dput, make use of that fact that dput() happily accepts a NULL
pointer to reduce this to just one goto label: out_unlock.
olddentry and newdentry are initialised to NULL and only set once a
value dentry is found. They are then dput() late in the function.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/20250716004725.1206467-9-neil@brown.name
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
