| Age | Commit message (Collapse) | Author |
|---|
|
During our fuzz testing of the connection and disconnection process at the
RFCOMM layer, we discovered this bug. By comparing the packets from a
normal connection and disconnection process with the testcase that
triggered a KASAN report. We analyzed the cause of this bug as follows:
1. In the packets captured during a normal connection, the host sends a
`Read Encryption Key Size` type of `HCI_CMD` packet
(Command Opcode: 0x1408) to the controller to inquire the length of
encryption key.After receiving this packet, the controller immediately
replies with a Command Completepacket (Event Code: 0x0e) to return the
Encryption Key Size.
2. In our fuzz test case, the timing of the controller's response to this
packet was delayed to an unexpected point: after the RFCOMM and L2CAP
layers had disconnected but before the HCI layer had disconnected.
3. After receiving the Encryption Key Size Response at the time described
in point 2, the host still called the rfcomm_check_security function.
However, by this time `struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;`
had already been released, and when the function executed
`return hci_conn_security(conn->hcon, d->sec_level, auth_type, d->out);`,
specifically when accessing `conn->hcon`, a null-ptr-deref error occurred.
To fix this bug, check if `sk->sk_state` is BT_CLOSED before calling
rfcomm_recv_frame in rfcomm_process_rx.
Signed-off-by: Yuxuan Hu <20373622@buaa.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
During suspend, only wakeable devices can be in acceptlist, so if the
device was previously added it needs to be removed otherwise the device
can end up waking up the system prematurely.
Fixes: 3b42055388c3 ("Bluetooth: hci_sync: Fix attempting to suspend with unfiltered passive scan")
Signed-off-by: Clancy Shang <clancy.shang@quectel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
|
|
While handling the HCI_EV_HARDWARE_ERROR event, if the underlying
BT controller is not responding, the GPIO reset mechanism would
free the hci_dev and lead to a use-after-free in hci_error_reset.
Here's the call trace observed on a ChromeOS device with Intel AX201:
queue_work_on+0x3e/0x6c
__hci_cmd_sync_sk+0x2ee/0x4c0 [bluetooth <HASH:3b4a6>]
? init_wait_entry+0x31/0x31
__hci_cmd_sync+0x16/0x20 [bluetooth <HASH:3b4a 6>]
hci_error_reset+0x4f/0xa4 [bluetooth <HASH:3b4a 6>]
process_one_work+0x1d8/0x33f
worker_thread+0x21b/0x373
kthread+0x13a/0x152
? pr_cont_work+0x54/0x54
? kthread_blkcg+0x31/0x31
ret_from_fork+0x1f/0x30
This patch holds the reference count on the hci_dev while processing
a HCI_EV_HARDWARE_ERROR event to avoid potential crash.
Fixes: c7741d16a57c ("Bluetooth: Perform a power cycle when receiving hardware error event")
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
There's a very confusing mistake in the code starting a HCI inquiry: We're
calling hci_dev_test_flag() to test for HCI_INQUIRY, but hci_dev_test_flag()
checks hdev->dev_flags instead of hdev->flags. HCI_INQUIRY is a bit that's
set on hdev->flags, not on hdev->dev_flags though.
HCI_INQUIRY equals the integer 7, and in hdev->dev_flags, 7 means
HCI_BONDABLE, so we were actually checking for HCI_BONDABLE here.
The mistake is only present in the synchronous code for starting an inquiry,
not in the async one. Also devices are typically bondable while doing an
inquiry, so that might be the reason why nobody noticed it so far.
Fixes: abfeea476c68 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
A recent commit restored the original (and still documented) semantics
for the HCI_QUIRK_USE_BDADDR_PROPERTY quirk so that the device address
is considered invalid unless an address is provided by firmware.
This specifically means that this flag must only be set for devices with
invalid addresses, but the Broadcom BCM4377 driver has so far been
setting this flag unconditionally.
Fortunately the driver already checks for invalid addresses during setup
and sets the HCI_QUIRK_INVALID_BDADDR flag, which can simply be replaced
with HCI_QUIRK_USE_BDADDR_PROPERTY to indicate that the default address
is invalid but can be overridden by firmware (long term, this should
probably just always be allowed).
Fixes: 6945795bc81a ("Bluetooth: fix use-bdaddr-property quirk")
Cc: stable@vger.kernel.org # 6.5
Reported-by: Felix Zhang <mrman@mrman314.tech>
Link: https://lore.kernel.org/r/77419ffacc5b4875e920e038332575a2a5bff29f.camel@mrman314.tech/
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reported-by: Felix Zhang <mrman@mrman314.tech>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Andrew Lunn says:
====================
drivers: net: Convert EEE handling to use linkmode bitmaps
EEE has until recently been limited to lower speeds due to the use of
the legacy u32 for link speeds. This restriction has been lifted, with
the use of linkmode bitmaps, added in the following patches:
1f069de63602 ethtool: add linkmode bitmap support to struct ethtool_keee
1d756ff13da6 ethtool: add suffix _u32 to legacy bitmap members of struct ethtool_keee
285cc15cc555 ethtool: adjust struct ethtool_keee to kernel needs
0b3100bc8fa7 ethtool: switch back from ethtool_keee to ethtool_eee for ioctl
d80a52335374 ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel side
This patchset converts the remaining MAC drivers still using the old
_u32 to link modes.
A couple of Intel drivers do odd things with EEE, setting the autoneg
bit. It is unclear why, no other driver does, ethtool does not display
it, and EEE is always negotiated. One patch in this series deletes
this code.
With all users of the legacy _u32 changed to link modes, the _u32
values are removed from keee, and support for them in the ethtool core
is removed.
---
Changes in v5:
- Restore zeroing eee_data.advertised in ax8817_178a
- Fix lp_advertised -> supported in ixgdb
- Link to v4: https://lore.kernel.org/r/20240218-keee-u32-cleanup-v4-0-71f13b7c3e60@lunn.ch
Changes in v4:
- Add missing conversion in igb
- Add missing conversion in r8152
- Add patch to remove now unused _u32 members
- Link to v3: https://lore.kernel.org/r/20240217-keee-u32-cleanup-v3-0-fcf6b62a0c7f@lunn.ch
Changes in v3:
- Add list of commits adding linkmodes to EEE to cover letter
- Fix grammar error in cover letter.
- Add Reviewed-by from Jacob Keller
- Link to v2: https://lore.kernel.org/r/20240214-keee-u32-cleanup-v2-0-4ac534b83d66@lunn.ch
Changes in v2:
- igb: Fix type 100BaseT to 1000BaseT.
- Link to v1: https://lore.kernel.org/r/20240204-keee-u32-cleanup-v1-0-fb6e08329d9a@lunn.ch
====================
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All MAC drivers have been converted to use the link mode members of
keee. So remove the _u32 values, and the code in the ethtool core to
convert the legacy _u32 values to link modes.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Energy Efficient Ethernet should always be negotiated with the link
peer. Don't include SUPPORTED_Autoneg in the results of get_eee() for
supported, advertised or lp_advertised, since it is
assumed. Additionally, ethtool(1) ignores the set bit, and no other
driver sets this.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert the tables to make use of ETHTOOL link mode bits, rather than
the old u32 SUPPORTED speeds. Make use of the linkmode helps to set
bits and compare linkmodes. As a result, the _u32 members of keee are
no longer used, a step towards removing them.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for bit manipulation of EEE
advertise, support and link partner support. The aim is to drop the
restricted _u32 variants in the near future.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Rework determining if EEE is active to make is similar as to how
phylib decides, and make use of a phylib helper to validate if EEE is
valid in for the current link mode. This then requires that PHYLIB is
selected.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The input parameter 'level' in rawv6_get/seticmpfilter is not used.
Therefore, remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The fast path usage breakdown describes the detail for 'inet_sock', fix
the markup title.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently when suspending driver and stopping workqueue it is checked whether
workqueue is not NULL and if so, it is destroyed.
Function destroy_workqueue() does drain queue and does clear variable, but
it does not set workqueue variable to NULL. This can cause kernel/module
panic if code attempts to clear workqueue that was not initialized.
This scenario is possible when resuming suspended driver in stmmac_resume(),
because there is no handling for failed stmmac_hw_setup(),
which can fail and return if DMA engine has failed to initialize,
and workqueue is initialized after DMA engine.
Should DMA engine fail to initialize, resume will proceed normally,
but interface won't work and TX queue will eventually timeout,
causing 'Reset adapter' error.
This then does destroy workqueue during reset process.
And since workqueue is initialized after DMA engine and can be skipped,
it will cause kernel/module panic.
To secure against this possible crash, set workqueue variable to NULL when
destroying workqueue.
Log/backtrace from crash goes as follows:
[88.031977]------------[ cut here ]------------
[88.031985]NETDEV WATCHDOG: eth0 (sxgmac): transmit queue 1 timed out
[88.032017]WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:477 dev_watchdog+0x390/0x398
<Skipping backtrace for watchdog timeout>
[88.032251]---[ end trace e70de432e4d5c2c0 ]---
[88.032282]sxgmac 16d88000.ethernet eth0: Reset adapter.
[88.036359]------------[ cut here ]------------
[88.036519]Call trace:
[88.036523] flush_workqueue+0x3e4/0x430
[88.036528] drain_workqueue+0xc4/0x160
[88.036533] destroy_workqueue+0x40/0x270
[88.036537] stmmac_fpe_stop_wq+0x4c/0x70
[88.036541] stmmac_release+0x278/0x280
[88.036546] __dev_close_many+0xcc/0x158
[88.036551] dev_close_many+0xbc/0x190
[88.036555] dev_close.part.0+0x70/0xc0
[88.036560] dev_close+0x24/0x30
[88.036564] stmmac_service_task+0x110/0x140
[88.036569] process_one_work+0x1d8/0x4a0
[88.036573] worker_thread+0x54/0x408
[88.036578] kthread+0x164/0x170
[88.036583] ret_from_fork+0x10/0x20
[88.036588]---[ end trace e70de432e4d5c2c1 ]---
[88.036597]Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
Fixes: 5a5586112b929 ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Correct type in the hsr_forward_do() comment.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Updating link clock rate for different speeds is only needed when
using RGMII, as that mode requires changing clock speed when the link
speed changes. Let's restrict updating the link clock speed in
ethqos_update_link_clk() to just RGMII. Other modes such as SGMII
only need to enable the link clock (which is already done in probe).
Signed-off-by: Sarosh Hasan <quic_sarohasa@quicinc.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Reviewed-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Justin Iurman says:
====================
ioam6: netlink multicast event
v5:
- remove the "must be the destination" check before sending an ioam6
event
v4:
- rebase on top of net merge
v3:
- patchset was mistakenly superseded due to same cover title used for
iproute2-next equivalent patch -> resend (renamed)
v2:
- fix warnings
Add generic netlink multicast event support to ioam6 as another solution
to share IOAM data with user space. The other one being via IPv6 raw
sockets combined with ancillary data (or packet socket, if the listener
does not need the processing of the IOAM Option-Type, since the hook is
before in that case). This patchset focuses on the IOAM Pre-allocated
Trace (the only Option-Type currently supported in the kernel), and so
on IOAM "trace" events. See an example of a consumer here [1].
[1] https://github.com/Advanced-Observability/ioam-agent-python/blob/netlink_event/ioam-agent.py
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we're processing an IOAM Pre-allocated Trace Option-Type (the only
one supported currently), then send the trace as an ioam6 event to the
netlink multicast group. This way, user space apps will be able to
collect IOAM data.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a multicast group to the ioam6 generic netlink family and provide
ioam6_event() to send an ioam6 event to the multicast group.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new api to support ioam6 events for generic netlink multicast. A
first "trace" event is added to the list of ioam6 events, which will
represent an IOAM Pre-allocated Trace Option-Type. It provides another
solution to share IOAM data with user space.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dtschema defines label as string, so $ref in other bindings is
redundant.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In a previous patch I added "select PHYLIB" at the wrong place for the
ADIN1110 driver symbol, so move it to its correct place under the
ADIN1110 kconfig symbol.
Fixes: a9f80df4f514 ("net: ethernet: adi: requires PHYLIB support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/lkml/77012b38-4b49-47f4-9a88-d773d52909ad@infradead.org/T/#m8ba397484738711edc0ad607b2c63ca02244e3c3
Cc: Lennart Franzen <lennart@lfdomain.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Cc: Nuno Sa <nuno.sa@analog.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jason Xing says:
====================
introduce drop reasons for tcp receive path
When I was debugging the reason about why the skb should be dropped in
syn cookie mode, I found out that this NOT_SPECIFIED reason is too
general. Thus I decided to refine it.
v10
Link: https://lore.kernel.org/netdev/20240223193321.6549-1-kuniyu@amazon.com/
1. fix three nit problems (Kuniyuki)
2. add reviewed-by tag (Kuniyuki)
v9
Link: https://lore.kernel.org/netdev/20240222113003.67558-1-kerneljasonxing@gmail.com/
1. nit: remove one unneeded 'else' (David)
2. add reviewed-by tags (Eric, David)
v8
Link: https://lore.kernel.org/netdev/20240221025732.68157-1-kerneljasonxing@gmail.com/
1. refine part of codes in patch [03/10] and patch [10/10] (Eric)
2. squash patch [11/11] in the last version into patch [10/11] (Eric)
3. add reviewed-by tags (Eric)
v7
Link: https://lore.kernel.org/all/20240219032838.91723-1-kerneljasonxing@gmail.com/
1. fix some misspelled problem (Kuniyuki)
2. remove redundant codes in tcp_v6_do_rcv() (Kuniyuki)
3. add reviewed-by tag in patch [02/11] (Kuniyuki)
v6
Link: https://lore.kernel.org/all/c987d2c79e4a4655166eb8eafef473384edb37fb.camel@redhat.com/
Link: https://lore.kernel.org/all/CAL+tcoAgSjwsmFnDh_Gs9ZgMi-y5awtVx+4VhJPNRADjo7LLSA@mail.gmail.com/
1. Take one case into consideration in tcp_v6_do_rcv(), behave like old
days, or else it will trigger errors (Paolo).
2. Extend NO_SOCKET reason to consider two more reasons for request
socket and child socket.
v5:
Link: https://lore.kernel.org/netdev/20240213134205.8705-1-kerneljasonxing@gmail.com/
Link: https://lore.kernel.org/netdev/20240213140508.10878-1-kerneljasonxing@gmail.com/
1. Use SKB_DROP_REASON_IP_OUTNOROUTES instead of introducing a new
one (Eric, David)
2. Reuse SKB_DROP_REASON_NOMEM to handle failure of request socket
allocation (Eric)
3. Reuse NO_SOCKET instead of introducing COOKIE_NOCHILD
4. avoid duplication of these opt_skb tests/actions (Eric)
5. Use new name (TCP_ABORT_ON_DATA) for readability (David)
6. Reuse IP_OUTNOROUTES instead of INVALID_DST (Eric)
---
HISTORY
This series is combined with 2 series sent before suggested by Jakub. So
I'm going to separately write changelogs for each of them.
PATCH 1/11 - 5/11
preivious Link: https://lore.kernel.org/netdev/20240213134205.8705-1-kerneljasonxing@gmail.com/
Summary
1. introduce all the dropreasons we need, [1/11] patch.
2. use new dropreasons in ipv4 cookie check, [2/11],[3/11] patch.
3. use new dropreasons ipv6 cookie check, [4/11],[5/11] patch.
v4:
Link: https://lore.kernel.org/netdev/20240212172302.3f95e454@kernel.org/
1. Fix misspelled name in Kdoc as suggested by Jakub.
v3:
Link: https://lore.kernel.org/all/CANn89iK40SoyJ8fS2U5kp3pDruo=zfQNPL-ppOF+LYaS9z-MVA@mail.gmail.com/
1. Split that patch into some smaller ones as suggested by Eric.
v2:
Link: https://lore.kernel.org/all/20240204104601.55760-1-kerneljasonxing@gmail.com/
1. change the title of 2/2 patch.
2. fix some warnings checkpatch tool showed before.
3. use return value instead of adding more parameters suggested by Eric.
PATCH 6/11 - 11/11
previous Link: https://lore.kernel.org/netdev/20240213140508.10878-1-kerneljasonxing@gmail.com/
v4:
Link: https://lore.kernel.org/netdev/CANn89iJar+H3XkQ8HpsirH7b-_sbFe9NBUdAAO3pNJK3CKr_bg@mail.gmail.com/
Link: https://lore.kernel.org/netdev/20240213131205.4309-1-kerneljasonxing@gmail.com/
Already got rid of @acceptable in tcp_rcv_state_process(), so I need to
remove *TCP_CONNREQNOTACCEPTABLE related codes which I wrote in the v3
series.
v3:
Link: https://lore.kernel.org/all/CANn89iK40SoyJ8fS2U5kp3pDruo=zfQNPL-ppOF+LYaS9z-MVA@mail.gmail.com/
1. Split that patch into some smaller ones as suggested by Eric.
v2:
Link: https://lore.kernel.org/all/20240204104601.55760-1-kerneljasonxing@gmail.com/
1. change the title of 2/2 patch.
2. fix some warnings checkpatch tool showed before.
3. use return value instead of adding more parameters suggested by Eric.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's time to let it work right now. We've already prepared for this:)
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update three callers including both ipv4 and ipv6 and let the dropreason
mechanism work in reality.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In this patch, I equipped this function with more dropreasons, but
it still doesn't work yet, which I will do later.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch does two things:
1) add two more new reasons
2) only change the return value(1) to various drop reason values
for the future use
For now, we still cannot trace those two reasons. We'll implement the full
function in the subsequent patch in this series.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Soon later patches can use these relatively more accurate
reasons to recognise and find out the cause.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Like what I did to ipv4 mode, refine this part: adding more drop
reasons for better tracing.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Like previous patch does, only moving skb drop logical code to
cookie_v6_check() for later refinement.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now it's time to use the prepared definitions to refine this part.
Four reasons used might enough for now, I think.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only move the skb drop from tcp_v4_do_rcv() to cookie_v4_check() itself,
no other changes made. It can help us refine the specific drop reasons
later.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adding one drop reason to detect the condition of skb dropped
because of hook points in cookie check and extending NO_SOCKET
to consider another two cases can be used later.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds /proc/sys/net/core/mem_pcpu_rsv sysctl file,
to make SK_MEMORY_PCPU_RESERV tunable.
Commit 3cd3399dd7a8 ("net: implement per-cpu reserves for
memory_allocated") introduced per-cpu forward alloc cache:
"Implement a per-cpu cache of +1/-1 MB, to reduce number
of changes to sk->sk_prot->memory_allocated, which
would otherwise be cause of false sharing."
sk_prot->memory_allocated points to global atomic variable:
atomic_long_t tcp_memory_allocated ____cacheline_aligned_in_smp;
If increasing the per-cpu cache size from 1MB to e.g. 16MB,
changes to sk->sk_prot->memory_allocated can be further reduced.
Performance may be improved on system with many cores.
Signed-off-by: Adam Li <adamli@os.amperecomputing.com>
Reviewed-by: Christoph Lameter (Ampere) <cl@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Luiz Angelo Daros de Luca says:
====================
net: dsa: realtek: support reset controller and update docs
The driver previously supported reset pins using GPIO, but it lacked
support for reset controllers. Although a reset method is generally not
required, the driver fails to detect the switch if the reset was kept
asserted by a previous driver.
This series adds support to reset a Realtek switch using a reset
controller. It also updates the binding documentation to remove the
requirement of a reset method and to add the new reset controller
property.
It was tested on a TL-WR1043ND v1 router (rtl8366rb via SMI).
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
---
Changes in v5:
- Fixed error checking logic when reset controller (de)assert fails
- Link to v4: https://lore.kernel.org/r/20240219-realtek-reset-v4-0-858b82a29503@gmail.com
Changes in v4:
- do not test for priv->reset,priv->reset_ctl
- updated commit message
- Link to v3: https://lore.kernel.org/r/20240213-realtek-reset-v3-0-37837e574713@gmail.com
Changes in v3:
- Rebased on the Realtek DSA driver refactoring (08f627164126)
- Dropped the reset controller example in bindings
- Used %pe in error printing
- Linked to v2: https://lore.kernel.org/r/20231027190910.27044-1-luizluca@gmail.com/
Changes in v2:
- Introduced a dedicated commit for removing the reset-gpios requirement
- Placed binding patches before code changes
- Removed the 'reset-names' property
- Moved the example from the commit message to realtek.yaml
- Split the reset function into _assert/_deassert variants
- Modified reset functions to return a warning instead of a value
- Utilized devm_reset_control_get_optional to prevent failure when the
reset control is missing
- Used 'true' and 'false' for boolean values
- Removed the CONFIG_RESET_CONTROLLER check as stub methods are
sufficient when undefined
- Linked to v1: https://lore.kernel.org/r/20231024205805.19314-1-luizluca@gmail.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for resetting the device using a reset controller,
complementing the existing GPIO reset functionality (reset-gpios).
Although the reset is optional and the driver performs a soft reset
during setup, if the initial reset pin state was asserted, the driver
will not detect the device until the reset is deasserted.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Realtek switches can use a reset controller instead of reset-gpios.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Cc: devicetree@vger.kernel.org
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 'reset-gpios' should not be mandatory. although they might be
required for some devices if the switch reset was left asserted by a
previous driver, such as the bootloader.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Cc: devicetree@vger.kernel.org
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.8-rc7
Few remaining fixes, hopefully the last wireless pull request to v6.8.
Two fixes to the stack and two to iwlwifi but no high priority fixes
this time.
* tag 'wireless-2024-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: only call drv_sta_rc_update for uploaded stations
MAINTAINERS: wifi: Add N: ath1*k entries to match .yaml files
MAINTAINERS: wifi: update Jeff Johnson e-mail address
wifi: iwlwifi: mvm: fix the TXF mapping for BZ devices
wifi: iwlwifi: mvm: ensure offloading TID queue exists
wifi: nl80211: reject iftype change with mesh ID change
====================
Link: https://lore.kernel.org/r/20240227135751.C5EC6C43390@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Not really a fix per se, but IPV6_TLV_IOAM is still tagged as "TEMPORARY
IANA allocation for IOAM", while RFC 9486 is available for some time
now. Just update the reference.
Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240226124921.9097-1-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Disable BH around the call to napi_schedule() to avoid following
error:
NOHZ tick-stop error: local softirq work is pending, handler #08!!!
Fixes: ec4c7e12396b ("lan78xx: Introduce NAPI polling support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240226110820.2113584-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace macro MAC_ADDRESS_EQUAL() for null_mac_addr checking with inline
function__agg_has_partner(). When MAC_ADDRESS_EQUAL() is verifiying
aggregator's partner mac addr with null_mac_addr, means that seeing if
aggregator has a valid partner or not. Using __agg_has_partner() makes it
more clear to understand.
In ad_port_selection_logic(), since aggregator->partner_system and
port->partner_oper.system has been compared first as a prerequisite, it is
safe to replace the upcoming MAC_ADDRESS_EQUAL() for null_mac_addr checking
with __agg_has_partner().
Delete null_mac_addr, which is not required anymore in bond_3ad.c, since
all references to it are gone.
Signed-off-by: Jones Syue <jonessyue@qnap.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/SI2PR04MB5097BCA8FF2A2F03D9A5A3EEDC5A2@SI2PR04MB5097.apcprd04.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently using plain XDP/ZC sockets on stmmac results in a kernel crash:
|[ 255.822584] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
|[...]
|[ 255.822764] Call trace:
|[ 255.822766] stmmac_tx_clean.constprop.0+0x848/0xc38
The program counter indicates xsk_tx_metadata_complete(). It works on
compl->tx_timestamp, which is not set by xsk_tx_metadata_to_compl() due to
missing meta data. Therefore, call xsk_tx_metadata_complete() only when
meta data is actually used.
Tested on imx93 without XDP, with XDP and with XDP/ZC.
Fixes: 1347b419318d ("net: stmmac: Add Tx HWTS support to XDP ZC")
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/netdev/87r0h7wg8u.fsf@kurt.kurt.home/
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20240222-stmmac_xdp-v2-1-4beee3a037e4@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MII code does not check the return value of mdio_read (among
others), and therefore no error code should be sent. A previous fix to
the use of an uninitialized variable propagates negative error codes,
that might lead to wrong operations by the MII library.
An example of such issues is the use of mii_nway_restart by the dm9601
driver. The mii_nway_restart function does not check the value returned
by mdio_read, which in this case might be a negative number which could
contain the exact bit the function checks (BMCR_ANENABLE = 0x1000).
Return zero in case of error, as it is common practice in users of
mdio_read to avoid wrong uses of the return value.
Fixes: 8f8abb863fa5 ("net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20240225-dm9601_ret_err-v1-1-02c1d959ea59@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "port_prox" variable is a pointer to "struct port_proxy" and
this structure ends in a flexible array:
struct port_proxy {
[...]
struct t7xx_port ports[];
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the argument "size + size * count" in the
devm_kzalloc() function.
This way, the code is more readable and safer.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20240224181932.2720-1-erick.archer@gmx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The input parameter 'opt' in rawv6_err() is not used. Therefore, remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240224084121.2479603-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
