| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Add support for AMD on 'perf mem' and 'perf c2c', the kernel
enablement patches went via tip.
Example:
$ sudo perf mem record -- -c 10000
^C[ perf record: Woken up 227 times to write data ]
[ perf record: Captured and wrote 58.760 MB perf.data (836978 samples) ]
$ sudo perf mem report -F mem,sample,snoop
Samples: 836K of event 'ibs_op//', Event count (approx.): 8418762
Memory access Samples Snoop
N/A 700620 N/A
L1 hit 126675 N/A
L2 hit 424 N/A
L3 hit 664 HitM
L3 hit 10 N/A
Local RAM hit 2 N/A
Remote RAM (1 hop) hit 8558 N/A
Remote Cache (1 hop) hit 3 N/A
Remote Cache (1 hop) hit 2 HitM
Remote Cache (2 hops) hit 10 HitM
Remote Cache (2 hops) hit 6 N/A
Uncached hit 4 N/A
$
- "perf lock" improvements:
- Add -E/--entries option to limit the number of entries to
display, say to ask for just the top 5 contended locks.
- Add -q/--quiet option to suppress header and debug messages.
- Add a 'perf test' kernel lock contention entry to test 'perf
lock'.
- "perf lock contention" improvements:
- Ask BPF's bpf_get_stackid() to skip some callchain entries.
The ones closer to the tooling are bpf related and not that
interesting, the ones calling the locking function are the ones
we're interested in, example of a full, unskipped callstack:
- Allow changing the callstack depth and number of entries to skip.
1 10.74 us 10.74 us 10.74 us spinlock __bpf_trace_contention_begin+0xb
0xffffffffc03b5c47 bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117
0xffffffffc03b5c47 bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117
0xffffffffbb8b8e75 bpf_trace_run2+0x35
0xffffffffbb7eab9b __bpf_trace_contention_begin+0xb
0xffffffffbb7ebe75 queued_spin_lock_slowpath+0x1f5
0xffffffffbc1c26ff _raw_spin_lock+0x1f
0xffffffffbb841015 tick_do_update_jiffies64+0x25
0xffffffffbb8409ee tick_irq_enter+0x9e
- Show full callstack in verbose mode (-v option), sometimes this
is desirable instead of showing just one callstack entry.
- Allow multiple time ranges in 'perf record --delay' to help in
reducing the amount of data collected from hardware tracing (Intel
PT, etc) when there is a rough idea of periods of time where events
of interest take time.
- Add Intel PT to record only decoder debug messages when error
happens.
- Improve layout of Intel PT man page.
- Add new branch types: alignment, data and inst faults and arch
specific ones, such as fiq, debug_halt, debug_exit, debug_inst and
debug_data on arm64.
Kernel enablement went thru the tip tree.
- Fix 'perf probe' error log check in 'perf test' when no debuginfo is
available.
- Fix 'perf stat' aggregation mode logic, it should be looking at the
CPU not at the core number.
- Fix flags parsing in 'perf trace' filters.
- Introduce compact encoding of CPU range encoding on perf.data, to
avoid having a bitmap with all the CPUs.
- Improvements to the 'perf stat' metrics, including adding
"core_wide", and computing "smt" from the CPU topology.
- Add support to the new PERF_FORMAT_LOST perf_event_attr.read_format,
that allows tooling to ask for the precise number of lost samples for
a given event.
- Add 'addr' sort key to see just the address of sampled instructions:
$ perf record -o- true | perf report -i- -s addr
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
# Samples: 12 of event 'cycles:u'
# Event count (approx.): 252512
#
# Overhead Address
# ........ ..................
42.96% 0x7f96f08443d7
29.55% 0x7f96f0859b50
14.76% 0x7f96f0852e02
8.30% 0x7f96f0855028
4.43% 0xffffffff8de01087
perf annotate: Toggle full address <-> offset display
- Add 'f' hotkey to the 'perf annotate' TUI interface when in
'disassembler output' mode ('o' hotkey) to toggle showing full
virtual address or just the offset.
- Cache DSO build-ids when synthesizing PERF_RECORD_MMAP records for
pre-existing threads, at the start of a 'perf record' session,
speeding up that record startup phase.
- Add a command line option to specify build ids in 'perf inject'.
- Update JSON event files for the Intel alderlake, broadwell,
broadwellde, broadwellx, cascadelakex, haswell, haswellx, icelake,
icelakex, ivybridge, ivytown, jaketown, sandybridge, sapphirerapids,
skylake, skylakex, and tigerlake processors.
- Update vendor JSON event files for the ARM Neoverse V1 and E1
platforms.
- Add a 'perf test' entry for 'perf mem' where a struct has false
sharing and this gets detected in the 'perf mem' output, tested with
Intel, AMD and ARM64 systems.
- Add a 'perf test' entry to test the resolution of java symbols, where
an output like this is expected:
8.18% jshell jitted-50116-29.so [.] Interpreter
0.75% Thread-1 jitted-83602-1670.so [.] jdk.internal.jimage.BasicImageReader.getString(int)
- Add tests for the ARM64 CoreSight hardware tracing feature, with
specially crafted pureloop, memcpy, thread loop and unroll tread that
then gets traced and the output compared with expected output.
Documentation explaining it is also included.
- Add per thread Intel PT 'perf test' entry to check that
PERF_RECORD_TEXT_POKE events are recorded per CPU, resulting in a
mixture of per thread and per CPU events and mmaps, verify that this
gets all recorded correctly.
- Introduce pthread mutex wrappers to allow for building with clang's
-Wthread-safety, i.e. using the "guarded_by" "pt_guarded_by"
"lockable", "exclusive_lock_function", "exclusive_trylock_function",
"exclusive_locks_required", and "no_thread_safety_analysis" compiler
function attributes.
- Fix empty version number when building outside of a git repo.
- Improve feature detection display when multiple versions of a feature
are present, such as for binutils libbfd, that has a mix of possible
ways to detect according to the Linux distribution.
Previously in some cases we had:
Auto-detecting system features
<SNIP>
... libbfd: [ on ]
... libbfd-liberty: [ on ]
... libbfd-liberty-z: [ on ]
<SNIP>
Now for this case we show just the main feature:
Auto-detecting system features
<SNIP>
... libbfd: [ on ]
<SNIP>
- Remove some unused structs, variables, macros, function prototypes
and includes from various places.
* tag 'perf-tools-for-v6.1-1-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (169 commits)
perf script: Add missing fields in usage hint
perf mem: Print "LFB/MAB" for PERF_MEM_LVLNUM_LFB
perf mem/c2c: Avoid printing empty lines for unsupported events
perf mem/c2c: Add load store event mappings for AMD
perf mem/c2c: Set PERF_SAMPLE_WEIGHT for LOAD_STORE events
perf mem: Add support for printing PERF_MEM_LVLNUM_{CXL|IO}
perf amd ibs: Sync arch/x86/include/asm/amd-ibs.h header with the kernel
tools headers UAPI: Sync include/uapi/linux/perf_event.h header with the kernel
perf stat: Fix cpu check to use id.cpu.cpu in aggr_printout()
perf test coresight: Add relevant documentation about ARM64 CoreSight testing
perf test: Add git ignore for tmp and output files of ARM CoreSight tests
perf test coresight: Add unroll thread test shell script
perf test coresight: Add unroll thread test tool
perf test coresight: Add thread loop test shell scripts
perf test coresight: Add thread loop test tool
perf test coresight: Add memcpy thread test shell script
perf test coresight: Add memcpy thread test tool
perf test: Add git ignore for perf data generated by the ARM CoreSight tests
perf test: Add arm64 asm pureloop test shell script
perf test: Add asm pureloop test tool
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Distribute spare resources to unconfigured hotplug bridges at
boot-time (not just when hot-adding such a bridge), which makes
hot-adding devices to docks work better.
- Revert to a BAR assignment inherited from firmware only when the
address is actually reachable via any upstream bridges, which fixes
some cases where firmware doesn't configure all devices.
- Add a sysfs interface to resize BARs so this can be done before
assigning devices to a VM through VFIO.
Power management:
- Disable Precision Time Management for all devices on suspend to
enable lower-power PM state. We previously did this just for Root
Ports, which isn't enough because downstream devices can still
generate PTM messages, which cause errors if it's disabled in the
Root Port.
- Save and restore the ASPM L1 PM Substates configuration for
suspend/ resume. Previously this configuration was lost, so L1.x
states likely stopped working after resume.
- Check whether the L1 PM Substates Capability exists. If it didn't
exist, we previously read junk and tried to configure L1 Substates
based on that.
- Fix the LTR_L1.2_THRESHOLD computation, which previously set a
threshold for entering L1.2 that was too low in some cases.
- Reduce the delay after transitions to or from D3cold by using
usleep_range() rather than msleep(), which often slept for ~19ms
instead of the 10ms normally required. The spec says 10ms is
enough, but it's possible we could trip over devices that need a
little more.
Error handling:
- Work around a BIOS bug that caused Intel Root Ports to advertise a
Root Port Programmed I/O (RP PIO) log size of zero, which caused
annoying warnings and prevented the kernel from dumping log
registers for DPC errors.
Qualcomm PCIe controller driver:
- Add support for SC8280XP and SA8540P host controllers and SM8450
endpoint controller.
- Disable Master AXI clock on endpoint controllers to save power when
link is idle or in L1.x.
- Expose link state transition counts via debugfs to help debug
issues with low-power states.
- Add auto-loading module support.
Synopsys DesignWare PCIe controller driver:
- Remove a dependency on ZONE_DMA32 by allocating the MSI target page
differently. There's more work to do related to eDMA controllers,
so it's not completely settled"
* tag 'pci-v6.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (71 commits)
PCI: qcom-ep: Check platform_get_resource_byname() return value
PCI: qcom-ep: Add support for SM8450 SoC
dt-bindings: PCI: qcom-ep: Add support for SM8450 SoC
dt-bindings: PCI: qcom-ep: Define clocks per platform
PCI: qcom-ep: Make PERST separation optional
dt-bindings: PCI: qcom-ep: Make PERST separation optional
PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe traffic
PCI: Expose PCIe Resizable BAR support via sysfs
PCI/ASPM: Correct LTR_L1.2_THRESHOLD computation
PCI/ASPM: Ignore L1 PM Substates if device lacks capability
PCI/ASPM: Factor out L1 PM Substates configuration
PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS
PCI: qcom-ep: Expose link transition counts via debugfs
PCI: qcom-ep: Disable IRQs during driver remove
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI/ASPM: Refactor L1 PM Substates Control Register programming
PCI: qcom-ep: Make use of the cached dev pointer
PCI: qcom-ep: Rely on the clocks supplied by devicetree
PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structure
phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- correct a variable type in the new pci1xxxx driver
- add a new SoC to the qcom-cci driver
- fix an issue with the designware driver which now got enough testing
- the aspeed driver now handles busy target backends better
* tag 'i2c-for-6.1-rc1-batch2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: aspeed: Assert NAK when slave is busy
i2c: designware: Fix handling of real but unexpected device interrupts
i2c: qcom-cci: Add MSM8226 compatible
dt-bindings: i2c: qcom,i2c-cci: Document clocks for MSM8974
dt-bindings: i2c: qcom,i2c-cci: Document MSM8226 compatible
i2c: microchip: pci1xxxx: Fix comparison of -EPERM against an unsigned variable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"There is nothing exciting going on, no core changes, just a few
drivers and cleanups.
New drivers:
- Cypress CY8C95x0 chip pin control support, along with an immediate
cleanup
- Mediatek MT8188 SoC pin control support
- Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin
control support
- Qualcomm PM7250, PM8450
- Rockchip RV1126 SoC pin control support
Improvements:
- Fix some missing pins in the Armada 37xx driver
- Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP()
macro
- Fix some GPIO irq_chips to be immutable
- Massive Qualcomm device tree binding cleanup, with more to come"
* tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits)
MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement
pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100"
pinctrl: Create subdirectory for StarFive drivers
dt-bindings: pinctrl: st,stm32: Document interrupt-controller property
dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property
dt-bindings: pinctrl: st,stm32: Document gpio-line-names
pinctrl: st: stop abusing of_get_named_gpio()
pinctrl: wpcm450: Correct the fwnode_irq_get() return value check
pinctrl: bcm: Remove unused struct bcm6328_pingroup
pinctrl: qcom: restrict drivers per ARM/ARM64
pinctrl: bcm: ns: Remove redundant dev_err call
gpio: rockchip: request GPIO mux to pinctrl when setting direction
pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback
pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops
pinctrl: cy8c95x0: Drop atomicity on operations on push_pull
pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux()
pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper
pinctrl: stm32: Switch to use dev_err_probe() helper
dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings
pinctrl: qcom: spmi-gpio: Add compatible for PM7250B
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for IBM Operational Panel
- a new driver for PinePhone keyboards
- RT5120 PMIC power key support
- various enhancements and support for new models in xpad (Xbox) driver
- a new compatible ID for Elan touchscreen driver
- rework of adp5588-keys driver to support configuring via device
properties (OF, ACPI, etc) instead of platform data, and proper
support of optional gpiochip functionality (and removal of
gpio-adp5588 driver)
- improvements to firmware update handling in Synaptics RMI4 driver
- support for double key matrix in mt6779-keypad
- support for polled mode in adc-joystick driver
- other assorted driver fixes, cleanups and improvements
* tag 'input-for-v6.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (90 commits)
Input: i8042 - fix refount leak on sparc
Input: i8042 - add LoongArch support in i8042-acpipnpio.h
Input: i8042 - rename i8042-x86ia64io.h to i8042-acpipnpio.h
Input: pinephone-keyboard - support the proxied I2C bus
Input: pinephone-keyboard - add PinePhone keyboard driver
dt-bindings: input: Add the PinePhone keyboard binding
dt-bindings: input: Convert hid-over-i2c to DT schema
input: drop empty comment blocks
Input: xpad - add X-Box Adaptive Profile button
Input: add ABS_PROFILE to uapi and documentation
Input: xpad - add X-Box Adaptive XBox button
Input: xpad - add X-Box Adaptive support
Input: ims-pcu - fix spelling mistake "BOOLTLOADER" -> "BOOTLOADER"
Input: ibm-panel - add missing MODULE_DEVICE_TABLE
Input: icn8505 - utilize acpi_get_subsystem_id()
Input: xpad - decipher xpadone packages with GIP defines
Input: xpad - refactor using BIT() macro
Input: synaptics-rmi4 - convert to use sysfs_emit() APIs
Input: twl4030-pwrbutton - add missing of.h include
Input: applespi - replace zero-length array with DECLARE_FLEX_ARRAY() helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Here's a fix for the smscufx USB graphics card to prevent a kernel
crash if it's plugged in/out too fast.
The other patches are mostly small cleanups, fixes in failure paths
and code removal:
- fix an use-after-free in smscufx USB graphics driver
- add missing pci_disable_device() in tridentfb failure paths
- correctly handle irq detection failure in mb862xx driver
- fix resume code in omapfb/dss
- drop unused code in controlfb, tridentfb, arkfb, imxfb and udlfb
- convert uvesafb to use scnprintf() instead of snprintf()
- convert gbefb to use dev_groups
- add MODULE_DEVICE_TABLE() entry to vga16fb"
* tag 'fbdev-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: mb862xx: Fix check of return value from irq_of_parse_and_map()
fbdev: vga16fb: Add missing MODULE_DEVICE_TABLE() entry
fbdev: tridentfb: Fix missing pci_disable_device() in probe and remove
fbdev: smscufx: Fix use-after-free in ufx_ops_open()
fbdev: gbefb: Convert to use dev_groups
fbdev: imxfb: Remove redundant dev_err() call
fbdev: omapfb/dss: Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()
fbdev: uvesafb: Convert snprintf to scnprintf
fbdev: arkfb: Remove the unused function dac_read_reg()
fbdev: tridentfb: Remove the unused function shadowmode_off()
fbdev: controlfb: Remove the unused function VAR_MATCH()
fbdev: udlfb: Remove redundant initialization to variable identical
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull dmi updates from Jean Delvare.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi: Fortify entry point length checks
|
|
Pull IPMI updates from Corey Minyard:
"Fix a bunch of little problems in IPMI
This is mostly just doc, config, and little tweaks. Nothing big, which
is why there was nothing for 6.0. There is one crash fix, but it's not
something that I think anyone is using yet"
* tag 'for-linus-6.1-1' of https://github.com/cminyard/linux-ipmi:
ipmi: Remove unused struct watcher_entry
ipmi: kcs: aspeed: Update port address comments
ipmi: Add __init/__exit annotations to module init/exit funcs
ipmi:ipmb: Don't call ipmi_unregister_smi() on a register failure
ipmi:ipmb: Fix a vague comment and a typo
dt-binding: ipmi: add fallback to npcm845 compatible
ipmi: Fix comment typo
char: ipmi: modify NPCM KCS configuration
dt-bindings: ipmi: Add npcm845 compatible
|
|
Commit 987f20a9dcce ("a.out: Remove the a.out implementation") removes
CONFIG_OSF4_COMPAT and its functionality. Hence, sys_osf_{readv,writev}
are now just aliases of sys_{readv,writev}.
Remove these needless aliases.
[ Identical patch also posted by Jason A. Donenfeld ]
Link: https://lore.kernel.org/lkml/CAHk-=wjwvBc3VQMNtUVUrMBVoMPSPu26OuatZ_+1gZ2m-PmmRA@mail.gmail.com/
Link: https://lore.kernel.org/all/20221004135301.1420873-1-Jason@zx2c4.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The merge of the kbuild tree dropped the renaming of the FSL_BOOKE
kconfig option.
Fixes: 8afc66e8d43b ("Merge tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2022-10-11
this is a pull request of 4 patches for net/main.
Anssi Hannula and Jimmy Assarsson contribute 4 patches for the
kvaser_usb driver. A check for actual received length of USB transfers
is added, the use of an uninitialized completion is fixed, the TX
queue is re-synced after restart, and the CAN state is fixed after
restart.
* tag 'linux-can-fixes-for-6.1-20221011' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: kvaser_usb_leaf: Fix CAN state after restart
can: kvaser_usb_leaf: Fix TX queue out of sync after restart
can: kvaser_usb: Fix use of uninitialized completion
can: kvaser_usb_leaf: Fix overread with an invalid command
====================
Link: https://lore.kernel.org/r/20221011074815.397301-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of always doing the safe variants for reading and writing MSRs
in Xen PV guests, make the behavior controllable via Kconfig option
and a boot parameter.
The default will be the current behavior, which is to always use the
safe variant.
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Refactor and rename xen_read_msr_safe() and xen_write_msr_safe() to
support both cases of MSR accesses, safe ones and potentially GP-fault
generating ones.
This will prepare to no longer swallow GPs silently in xen_read_msr()
and xen_write_msr().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The CPU vendor checks for pmu emulation are rather limited today, as
the assumption seems to be that only Intel and AMD are existing and/or
supported vendors.
Fix that by handling Centaur and Zhaoxin CPUs the same way as Intel,
and Hygon the same way as AMD.
While at it fix the return type of is_intel_pmu_msr().
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Today pmu_msr_read() and pmu_msr_write() fall back to the safe variants
of read/write MSR in case the MSR access isn't emulated via Xen. Allow
the caller to select that faults should not be recovered from by passing
NULL for the error pointer.
Restructure the code to make it more readable.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Linaro reported stringop-overread warnings in ath11k (this is one of many):
drivers/net/wireless/ath/ath11k/mac.c:2238:29: error: 'ath11k_peer_assoc_h_he_limit' reading 16 bytes from a region of size 0 [-Werror=stringop-overread]
My further investigation showed that these warnings happen on GCC 11.3 but not
with GCC 12.2, and with only the kernel config Linaro provided:
https://builds.tuxbuild.com/2F4W7nZHNx3T88RB0gaCZ9hBX6c/config
I saw the same warnings both with arm64 and x86_64 builds and KASAN seems to be
the reason triggering these warnings with GCC 11. Nobody else has reported
this so this seems to be quite rare corner case. I don't know what specific
commit started emitting this warning so I can't provide a Fixes tag. The
function hasn't been touched for a year.
I decided to workaround this by converting the pointer to a new array in stack,
and then copying the data to the new array. It's only 16 bytes anyway and this
is executed during association, so not in a hotpath.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/all/CA+G9fYsZ_qypa=jHY_dJ=tqX4515+qrV9n2SWXVDHve826nF7Q@mail.gmail.com/
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221010160638.20152-1-kvalo@kernel.org
|
|
cases)
BUGs like this are still reproducible:
[ 31.509616] list_add corruption. prev->next should be next (ffff8f8644242300), but was ffff8f86493fd300. (prev=ffff8f86493fd300).
[ 31.521544] ------------[ cut here ]------------
[ 31.526248] kernel BUG at lib/list_debug.c:30!
[ 31.530781] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 31.535831] CPU: 1 PID: 626 Comm: wpa_supplicant Not tainted 6.0.0+ #7
[ 31.542450] Hardware name: Dell Inc. Inspiron 660s/0478VN , BIOS A07 08/24/2012
[ 31.550484] RIP: 0010:__list_add_valid.cold+0x3a/0x5b
[ 31.555537] Code: f2 4c 89 c1 48 89 fe 48 c7 c7 28 20 69 89 e8 4c e3 fd ff 0f 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 d0 1f 69 89 e8 35 e3 fd ff <0f> 0b 4c 89 c1 48 c7 c7 78 1f 69 89 e8 24 e3 fd ff 0f 0b 48 c7 c7
[ 31.574605] RSP: 0018:ffff9f6f00dc3748 EFLAGS: 00010286
[ 31.579990] RAX: 0000000000000075 RBX: ffff8f8644242080 RCX: 0000000000000000
[ 31.587155] RDX: 0000000000000201 RSI: ffffffff8967862d RDI: 00000000ffffffff
[ 31.594482] RBP: ffff8f86493fd2e8 R08: 0000000000000000 R09: 00000000ffffdfff
[ 31.601735] R10: ffff9f6f00dc3608 R11: ffffffff89f46128 R12: ffff8f86493fd300
[ 31.608986] R13: ffff8f86493fd300 R14: ffff8f8644242300 R15: ffff8f8643dd3f2c
[ 31.616151] FS: 00007f3bb9a707c0(0000) GS:ffff8f865a300000(0000) knlGS:0000000000000000
[ 31.624447] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 31.630286] CR2: 00007fe3647d5600 CR3: 00000001125a6002 CR4: 00000000000606e0
[ 31.637539] Call Trace:
[ 31.639936] <TASK>
[ 31.642143] iwl_mvm_mac_wake_tx_queue+0x71/0x90 [iwlmvm]
[ 31.647569] ieee80211_queue_skb+0x4b6/0x720 [mac80211]
...
So, it is necessary to extend the applied solution with commit 14a3aacf517a9
("iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue")
to all other cases where the station queues are invalidated and the related
lists are not emptied. Because, otherwise as before, if some new element is
added later to the list in iwl_mvm_mac_wake_tx_queue, it can match with the
old one and produce the same commented BUG.
That is, in order to avoid this problem completely, we must also remove the
related lists for the other cases when station queues are invalidated.
Fixes: cfbc6c4c5b91c ("iwlwifi: mvm: support mac80211 TXQs model")
Reported-by: Petr Stourac <pstourac@redhat.com>
Tested-by: Petr Stourac <pstourac@redhat.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221010081611.145027-1-jtornosm@redhat.com
|
|
Checking the relevant rxd bits for the checksum information only indicates
if the checksum verification was performed by the hardware and doesn't show
actual checksum errors. Checksum errors are indicated in the info field of
the DMA descriptor. Fix packets erroneously marked as CHECKSUM_UNNECESSARY
by checking the extra bits as well.
Those bits are only passed to the driver for MMIO devices at the moment, so
limit checksum offload to those.
Fixes: 2122dfbfd0bd ("mt76: mt7615: add rx checksum offload support")
Fixes: 94244d2ea503 ("mt76: mt7915: add rx checksum offload support")
Fixes: 0e75732764e8 ("mt76: mt7921: enable rx csum offload")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221005130824.23371-2-nbd@nbd.name
|
|
When 802.3 decap offload is enabled, the hardware indicates header translation
failure, whenever either the LLC-SNAP header was not found, or a VLAN header
with an unregcognized tag is present.
In that case, the hardware inserts a 2-byte length fields after the MAC
addresses. For VLAN packets, this tag needs to be removed. However,
for 802.3 LLC packets, the length bytes should be preserved, since there
is no separate ethertype field in the data.
This fixes an issue where the length field was omitted for LLC frames, causing
them to be malformed after hardware decap.
Fixes: 1eeff0b4c1a6 ("mt76: mt7915: fix decap offload corner case with 4-addr VLAN frames")
Reported-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221005130824.23371-1-nbd@nbd.name
|
|
Jimmy Assarsson <extja@kvaser.com> says:
Changes in v5: https://lore.kernel.org/all/20221010150829.199676-1-extja@kvaser.com
- Split series [1], kept only critical bug fixes that should go into
stable, since v4 got rejected [2].
Non-critical fixes are posted in a separate series.
Changes in v4: https://lore.kernel.org/all/20220903182344.139-1-extja@kvaser.com
- Add Tested-by: Anssi Hannula to
[PATCH v4 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
- Update commit message in
[PATCH v4 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
Changes in v3: https://lore.kernel.org/all/20220901122729.271-1-extja@kvaser.com
- Rebase on top of commit
1d5eeda23f36 ("can: kvaser_usb: advertise timestamping capabilities and add ioctl support")
- Add Tested-by: Anssi Hannula
- Add stable@vger.kernel.org to CC.
- Add my S-o-b to all patches
- Fix regression introduced in
[PATCH v2 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
found by Anssi Hannula
https://lore.kernel.org/all/b25bc059-d776-146d-0b3c-41aecf4bd9f8@bitwise.fi
v2: https://lore.kernel.org/all/20220708115709.232815-1-extja@kvaser.com
v1: https://lore.kernel.org/all/20220516134748.3724796-1-anssi.hannula@bitwise.fi
[1] https://lore.kernel.org/linux-can/20220903182344.139-1-extja@kvaser.com
[2] https://lore.kernel.org/linux-can/20220920192708.jcvyph3ec7lscuqj@pengutronix.de
Link: https://lore.kernel.org/all/20221010150829.199676-1-extja@kvaser.com
[mkl: add/update links]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
can_restart() expects CMD_START_CHIP to set the error state to
ERROR_ACTIVE as it calls netif_carrier_on() immediately afterwards.
Otherwise the user may immediately trigger restart again and hit a
BUG_ON() in can_restart().
Fix kvaser_usb_leaf set_mode(CMD_START_CHIP) to set the expected state.
Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-5-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The TX queue seems to be implicitly flushed by the hardware during
bus-off or bus-off recovery, but the driver does not reset the TX
bookkeeping.
Despite not resetting TX bookkeeping the driver still re-enables TX
queue unconditionally, leading to "cannot find free context" /
NETDEV_TX_BUSY errors if the TX queue was full at bus-off time.
Fix that by resetting TX bookkeeping on CAN restart.
Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778.
Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-4-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
flush_comp is initialized when CMD_FLUSH_QUEUE is sent to the device and
completed when the device sends CMD_FLUSH_QUEUE_RESP.
This causes completion of uninitialized completion if the device sends
CMD_FLUSH_QUEUE_RESP before CMD_FLUSH_QUEUE is ever sent (e.g. as a
response to a flush by a previously bound driver, or a misbehaving
device).
Fix that by initializing flush_comp in kvaser_usb_init_one() like the
other completions.
This issue is only triggerable after RX URBs have been set up, i.e. the
interface has been opened at least once.
Cc: stable@vger.kernel.org
Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-3-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
For command events read from the device,
kvaser_usb_leaf_read_bulk_callback() verifies that cmd->len does not
exceed the size of the received data, but the actual kvaser_cmd handlers
will happily read any kvaser_cmd fields without checking for cmd->len.
This can cause an overread if the last cmd in the buffer is shorter than
expected for the command type (with cmd->len showing the actual short
size).
Maximum overread seems to be 22 bytes (CMD_LEAF_LOG_MESSAGE), some of
which are delivered to userspace as-is.
Fix that by verifying the length of command before handling it.
This issue can only occur after RX URBs have been set up, i.e. the
interface has been opened at least once.
Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-2-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Pull xfs updates from Dave Chinner:
"There are relatively few updates this cycle; half the cycle was eaten
by a grue, the other half was eaten by a tricky data corruption issue
that I still haven't entirely solved.
Hence there's no major changes in this cycle and it's largely just
minor cleanups and small bug fixes:
- fixes for filesystem shutdown procedure during a DAX memory failure
notification
- bug fixes
- logic cleanups
- log message cleanups
- updates to use vfs{g,u}id_t helpers where appropriate"
* tag 'xfs-6.1-for-linus' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: on memory failure, only shut down fs after scanning all mappings
xfs: rearrange the logic and remove the broken comment for xfs_dir2_isxx
xfs: trim the mapp array accordingly in xfs_da_grow_inode_int
xfs: do not need to check return value of xlog_kvmalloc()
xfs: port to vfs{g,u}id_t and associated helpers
xfs: remove xfs_setattr_time() declaration
xfs: Remove the unneeded result variable
xfs: missing space in xfs trace log
xfs: simplify if-else condition in xfs_reflink_trim_around_shared
xfs: simplify if-else condition in xfs_validate_new_dalign
xfs: replace unnecessary seq_printf with seq_puts
xfs: clean up "%Ld/%Lu" which doesn't meet C standard
xfs: remove redundant else for clean code
xfs: remove the redundant word in comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"This round looks fairly small comparing to the previous updates and
includes mostly minor bug fixes. Nevertheless, as we've still
interested in improving the stability, Chao added some debugging
methods to diagnoze subtle runtime inconsistency problem.
Enhancements:
- store all the corruption or failure reasons in superblock
- detect meta inode, summary info, and block address inconsistency
- increase the limit for reserve_root for low-end devices
- add the number of compressed IO in iostat
Bug fixes:
- DIO write fix for zoned devices
- do out-of-place writes for cold files
- fix some stat updates (FS_CP_DATA_IO, dirty page count)
- fix race condition on setting FI_NO_EXTENT flag
- fix data races when freezing super
- fix wrong continue condition check in GC
- do not allow ATGC for LFS mode
In addition, there're some code enhancement and clean-ups as usual"
* tag 'f2fs-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (32 commits)
f2fs: change to use atomic_t type form sbi.atomic_files
f2fs: account swapfile inodes
f2fs: allow direct read for zoned device
f2fs: support recording errors into superblock
f2fs: support recording stop_checkpoint reason into super_block
f2fs: remove the unnecessary check in f2fs_xattr_fiemap
f2fs: introduce cp_status sysfs entry
f2fs: fix to detect corrupted meta ino
f2fs: fix to account FS_CP_DATA_IO correctly
f2fs: code clean and fix a type error
f2fs: add "c_len" into trace_f2fs_update_extent_tree_range for compressed file
f2fs: fix to do sanity check on summary info
f2fs: port to vfs{g,u}id_t and associated helpers
f2fs: fix to do sanity check on destination blkaddr during recovery
f2fs: let FI_OPU_WRITE override FADVISE_COLD_BIT
f2fs: fix race condition on setting FI_NO_EXTENT flag
f2fs: remove redundant check in f2fs_sanity_check_cluster
f2fs: add static init_idisk_time function to reduce the code
f2fs: fix typo
f2fs: fix wrong dirty page count when race between mmap and fallocate.
...
|
|
Pull 9p updates from Dominique Martinet:
"Smaller buffers for small messages and fixes.
The highlight of this is Christian's patch to allocate smaller buffers
for most metadata requests: 9p with a big msize would try to allocate
large buffers when just 4 or 8k would be more than enough; this brings
in nice performance improvements.
There's also a few fixes for problems reported by syzkaller (thanks to
Schspa Shi, Tetsuo Handa for tests and feedback/patches) as well as
some minor cleanup"
* tag '9p-for-6.1' of https://github.com/martinetd/linux:
net/9p: clarify trans_fd parse_opt failure handling
net/9p: add __init/__exit annotations to module init/exit funcs
net/9p: use a dedicated spinlock for trans_fd
9p/trans_fd: always use O_NONBLOCK read/write
net/9p: allocate appropriate reduced message buffers
net/9p: add 'pooled_rbuffers' flag to struct p9_trans_module
net/9p: add p9_msg_buf_size()
9p: add P9_ERRMAX for 9p2000 and 9p2000.u
net/9p: split message size argument into 't_size' and 'r_size' pair
9p: trans_fd/p9_conn_cancel: drop client lock earlier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 debugfs updates from Andreas Gruenbacher:
- Improve the way how the state of glocks is reported in debugfs for
glocks which are not held by processes, but rather by other resouces
like cached inodes or flocks.
* tag 'gfs2-nopid-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Mark the remaining process-independent glock holders as GL_NOPID
gfs2: Mark flock glock holders as GL_NOPID
gfs2: Add GL_NOPID flag for process-independent glock holders
gfs2: Add flocks to glockfd debugfs file
gfs2: Add glockfd debugfs file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Make sure to initialize the filesystem work queues before registering
the filesystem; this prevents them from being used uninitialized.
- On filesystem withdraw: prevent a a double iput() and immediately
reject pending locking requests that can no longer succeed.
- Use TRY lock in gfs2_inode_lookup() to prevent a rare glock hang
during evict.
- During filesystem mount, explicitly make sure that the sb_bsize and
sb_bsize_shift super block fields are consistent with each other.
This prevents messy error messages during fuzz testing.
- Switch from strlcpy to strscpy.
* tag 'gfs2-v6.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Register fs after creating workqueues
gfs2: Check sb_bsize_shift after reading superblock
gfs2: Switch from strlcpy to strscpy
gfs2: Clear flags when withdraw prevents xmote
gfs2: Dequeue waiters when withdrawn
gfs2: Prevent double iput for journal on error
gfs2: Use TRY lock in gfs2_inode_lookup for UNLINKED inodes
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
- data corruption fix when cache disabled
- four RDMA (smbdirect) improvements, including enabling support for
SoftiWARP
- four signing improvements
- three directory lease improvements
- four cleanup fixes
- minor security fix
- two debugging improvements
* tag '6.1-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (21 commits)
smb3: fix oops in calculating shash_setkey
cifs: secmech: use shash_desc directly, remove sdesc
smb3: rename encryption/decryption TFMs
cifs: replace kfree() with kfree_sensitive() for sensitive data
cifs: remove initialization value
cifs: Replace a couple of one-element arrays with flexible-array members
smb3: do not log confusing message when server returns no network interfaces
smb3: define missing create contexts
cifs: store a pointer to a fid in the cfid structure instead of the struct
cifs: improve handlecaching
cifs: Make tcon contain a wrapper structure cached_fids instead of cached_fid
smb3: add dynamic trace points for tree disconnect
Fix formatting of client smbdirect RDMA logging
Handle variable number of SGEs in client smbdirect send.
Reduce client smbdirect max receive segment size
Decrease the number of SMB3 smbdirect client SGEs
cifs: Fix the error length of VALIDATE_NEGOTIATE_INFO message
cifs: destage dirty pages before re-reading them for cache=none
cifs: return correct error in ->calc_signature()
MAINTAINERS: Add Tom Talpey as cifs.ko reviewer
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull more nfsd updates from Chuck Lever:
- filecache code clean-ups
* tag 'nfsd-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: rework hashtable handling in nfsd_do_file_acquire
nfsd: fix nfsd_file_unhash_and_dispose
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs tmpfile updates from Al Viro:
"Miklos' ->tmpfile() signature change; pass an unopened struct file to
it, let it open the damn thing. Allows to add tmpfile support to FUSE"
* tag 'pull-tmpfile' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fuse: implement ->tmpfile()
vfs: open inside ->tmpfile()
vfs: move open right after ->tmpfile()
vfs: make vfs_tmpfile() static
ovl: use vfs_tmpfile_open() helper
cachefiles: use vfs_tmpfile_open() helper
cachefiles: only pass inode to *mark_inode_inuse() helpers
cachefiles: tmpfile error handling cleanup
hugetlbfs: cleanup mknod and tmpfile
vfs: add vfs_tmpfile_open() helper
|
|
Looks like a copy-paste error sneaked in here at some point,
causing the key_size for these tunnels to be calculated
incorrectly. This size ends up being send to the firmware,
causing unexpected behaviour in some cases.
Fixes: 78a722af4ad9 ("nfp: flower: compile match for IPv6 tunnels")
Reported-by: Chaoyong He <chaoyong.he@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20221007092132.218386-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fill in also 5gbase-r and 25gbase-r PHY interface modes into the
phy_interface_t bitmap in sfp_parse_support().
Fixes: fd580c983031 ("net: sfp: augment SFP parsing with phy_interface_t bitmap")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221007084844.20352-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The original commit that added support for the SYSTEMPORT Lite variant
halved the number of RX descriptors due to a confusion between the
number of descriptors and the number of descriptor words. There are 512
descriptor *words* which means 256 descriptors total.
Fixes: 44a4524c54af ("net: systemport: Add support for SYSTEMPORT Lite")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221007034201.4126054-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixes: 13defa275eef ("net: marvell: prestera: Add matchall support")
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Link: https://lore.kernel.org/r/20221006190600.881740-1-maksym.glubokiy@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Dave Hansen:
"There are some small things here, plus one big one.
The big one detected and refused to create W+X kernel mappings. This
caused a bit of trouble and it is entirely disabled on 32-bit due to
known unfixable EFI issues. It also oopsed on some systemd eBPF use,
which kept some users from booting.
The eBPF issue is fixed, but those troubles were caught relatively
recently which made me nervous that there are more lurking. The final
commit in here retains the warnings, but doesn't actually refuse to
create W+X mappings.
Summary:
- Detect insecure W+X mappings and warn about them, including a few
bug fixes and relaxing the enforcement
- Do a long-overdue defconfig update and enabling W+X boot-time
detection
- Cleanup _PAGE_PSE handling (follow-up on an earlier bug)
- Rename a change_page_attr function"
* tag 'x86_mm_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Ease W^X enforcement back to just a warning
x86/mm: Disable W^X detection and enforcement on 32-bit
x86/mm: Add prot_sethuge() helper to abstract out _PAGE_PSE handling
x86/mm/32: Fix W^X detection when page tables do not support NX
x86/defconfig: Enable CONFIG_DEBUG_WX=y
x86/defconfig: Refresh the defconfigs
x86/mm: Refuse W^X violations
x86/mm: Rename set_memory_present() to set_memory_p()
|
|
Pull xtensa updates from Max Filippov:
- add support for FDPIC and static PIE executable formats for noMMU
* tag 'xtensa-20221010' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: add FDPIC and static PIE support for noMMU
xtensa: clean up ELF_PLAT_INIT macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
"Just a couple of changes. Fixes to compilation of the old/legacy
Freescale 68328 targets in some kernel configurations, and some
default configuration updates.
Summary:
- fix build problems for legacy 68328 targets
- clean out configs of removed options"
* tag 'm68knommu-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: update config files
m68knommu: fix non-mmu classic 68000 legacy timer tick selection
m68knommu: fix non-specific 68328 choice interrupt build failure
|
|
Pull virtio updates from Michael Tsirkin:
- 9k mtu perf improvements
- vdpa feature provisioning
- virtio blk SECURE ERASE support
- fixes and cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_pci: don't try to use intxif pin is zero
vDPA: conditionally read MTU and MAC in dev cfg space
vDPA: fix spars cast warning in vdpa_dev_net_mq_config_fill
vDPA: check virtio device features to detect MQ
vDPA: check VIRTIO_NET_F_RSS for max_virtqueue_paris's presence
vDPA: only report driver features if FEATURES_OK is set
vDPA: allow userspace to query features of a vDPA device
virtio_blk: add SECURE ERASE command support
vp_vdpa: support feature provisioning
vdpa_sim_net: support feature provisioning
vdpa: device feature provisioning
virtio-net: use mtu size as buffer length for big packets
virtio-net: introduce and use helper function for guest gso support checks
virtio: drop vp_legacy_set_queue_size
virtio_ring: make vring_alloc_queue_packed prettier
virtio_ring: split: Operators use unified style
vhost: add __init/__exit annotations to module init/exit funcs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Remove unnecessary delay while probing for VMBus (Stanislav
Kinsburskiy)
- Optimize vmbus_on_event (Saurabh Sengar)
- Fix a race in Hyper-V DRM driver (Saurabh Sengar)
- Miscellaneous clean-up patches from various people
* tag 'hyperv-next-signed-20221009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Replace kmap() with kmap_local_page()
drm/hyperv: Add ratelimit on error message
hyperv: simplify and rename generate_guest_id
Drivers: hv: vmbus: Split memcpy of flex-array
scsi: storvsc: remove an extraneous "to" in a comment
Drivers: hv: vmbus: Don't wait for the ACPI device upon initialization
Drivers: hv: vmbus: Use PCI_VENDOR_ID_MICROSOFT for better discoverability
Drivers: hv: vmbus: Fix kernel-doc
drm/hyperv: Don't overwrite dirt_needed value set by host
Drivers: hv: vmbus: Optimize vmbus_on_event
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These fix assorted issues in the thermal core and ARM thermal drivers.
Specifics:
- Use platform data to get the sensor ID instead of parsing the
device in imx_sc thermal driver and remove the dedicated OF
function from the core code (Daniel Lezcano).
- Fix Kconfig dependency for the QCom tsens thermal driver (Jonathan
Cameron).
- Add missing const annotation to the RCar ops thermal driver (Lad
Prabhakar).
- Drop duplicate parameter check from
thermal_zone_device_register_with_trips() (Lad Prabhakar).
- Fix NULL pointer dereference in trip_point_temp_store() by making
it check if the ->set_trip_temp() operation is present (Lad
Prabhakar).
- Fix the MSM8939 fourth sensor hardware ID in the QCom tsens thermal
driver (Vincent Knecht)"
* tag 'thermal-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_id
thermal/core: Add a check before calling set_trip_temp()
thermal/core: Drop valid pointer check for type
thermal/drivers/rcar_thermal: Constify static thermal_zone_device_ops
thermal/drivers/qcom: Drop false build dependency of all QCOM drivers on QCOM_TSENS
thermal/of: Remove the thermal_zone_of_get_sensor_id() function
thermal/drivers/imx_sc: Rely on the platform data to get the resource id
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the turbostat utility, extend the macros used for
defining device power management callbacks and add a diagnostic
message to the generic power domains code.
Specifics:
- Add an error message to be printed when a power domain marked as
"always on" is not actually on during initialization (Johan
Hovold).
- Extend macros used for defining power management callbacks to allow
conditional exporting of noirq and late/early suspend/resume PM
callbacks (Paul Cercueil).
- Update the turbostat utility:
- Add support for two new platforms (Zhang Rui).
- Adjust energy unit for Sapphire Rapids (Zhang Rui).
- Do not dump TRL if turbo is not supported (Artem Bityutskiy)"
* tag 'pm-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/power turbostat: version 2022.10.04
tools/power turbostat: Use standard Energy Unit for SPR Dram RAPL domain
tools/power turbostat: Do not dump TRL if turbo is not supported
tools/power turbostat: Add support for MeteorLake platforms
tools/power turbostat: Add support for RPL-S
PM: Improve EXPORT_*_DEV_PM_OPS macros
PM: domains: log failures to register always-on domains
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix two issues, in APEI and in the int3472 driver, clean up the
ACPI thermal driver, add ACPI support for non-GPE system wakeup events
and make the system reboot code use the S5 (system off) state by
default.
Specifics:
- Fix ACPI device object reference counting in (recently updated)
skl_int3472_fill_clk_pdata() (Andy Shevchenko).
- Fix a memory leak in APEI by avoiding to add a task_work to kernel
threads running when an asynchronous error is detected (Shuai Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more
consistent and drop redundant code from it (Rafael Wysocki)"
* tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: thermal: Drop some redundant code
ACPI: thermal: Drop redundant parens from expressions
ACPI: thermal: Use white space more consistently
platform/x86: int3472: Don't leak reference on error
ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
PM: ACPI: reboot: Reinstate S5 for reboot
kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode
ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle
i2c: acpi: Use ACPI wake capability bit to set wake_irq
ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- fix a regression in the ARM dma-direct conversion (Christoph Hellwig)
- use memcpy_{from,to}_page (Fabio M. De Francesco)
- cleanup the swiotlb MAINTAINERS entry (Lukas Bulwahn)
- make SG table pool allocation less fragile (Masahiro Yamada)
- don't panic on swiotlb initialization failure (Robin Murphy)
* tag 'dma-mapping-6.1-2022-10-10' of git://git.infradead.org/users/hch/dma-mapping:
ARM/dma-mapping: remove the dma_coherent member of struct dev_archdata
ARM/dma-mappіng: don't override ->dma_coherent when set from a bus notifier
lib/sg_pool: change module_init(sg_pool_init) to subsys_initcall
MAINTAINERS: merge SWIOTLB SUBSYSTEM into DMA MAPPING HELPERS
swiotlb: don't panic!
swiotlb: replace kmap_atomic() with memcpy_{from,to}_page()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- remove the bus_set_iommu() interface which became unnecesary because
of IOMMU per-device probing
- make the dma-iommu.h header private
- Intel VT-d changes from Lu Baolu:
- Decouple PASID and PRI from SVA
- Add ESRTPS & ESIRTPS capability check
- Cleanups
- Apple DART support for the M1 Pro/MAX SOCs
- support for AMD IOMMUv2 page-tables for the DMA-API layer.
The v2 page-tables are compatible with the x86 CPU page-tables. Using
them for DMA-API prepares support for hardware-assisted IOMMU
virtualization
- support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver
- some smaller fixes and cleanups
* tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits)
iommu/vt-d: Avoid unnecessary global DMA cache invalidation
iommu/vt-d: Avoid unnecessary global IRTE cache invalidation
iommu/vt-d: Rename cap_5lp_support to cap_fl5lp_support
iommu/vt-d: Remove pasid_set_eafe()
iommu/vt-d: Decouple PASID & PRI enabling from SVA
iommu/vt-d: Remove unnecessary SVA data accesses in page fault path
dt-bindings: iommu: arm,smmu-v3: Relax order of interrupt names
iommu: dart: Support t6000 variant
iommu/io-pgtable-dart: Add DART PTE support for t6000
iommu/io-pgtable: Add DART subpage protection support
iommu/io-pgtable: Move Apple DART support to its own file
iommu/mediatek: Add support for MT6795 Helio X10 M4Us
iommu/mediatek: Introduce new flag TF_PORT_TO_ADDR_MT8173
dt-bindings: mediatek: Add bindings for MT6795 M4U
iommu/iova: Fix module config properly
iommu/amd: Fix sparse warning
iommu/amd: Remove outdated comment
iommu/amd: Free domain ID after domain_flush_pages
iommu/amd: Free domain id in error path
iommu/virtio: Fix compile error with viommu_capable()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for compatible
strings used in kernel sources against compatible strings in DT
schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema
titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems"
* tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits)
of: base: Shift refcount decrement in of_find_last_cache_level()
dt-bindings: leds: Add MediaTek MT6370 flashlight
dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
dt-bindings: mailbox: Convert mtk-gce to DT schema
of: base: make of_device_compatible_match() accept const device node
of: Fix "dma-ranges" handling for bus controllers
of: fdt: Remove unused struct fdt_scan_status
dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node
dt-bindings: timer: Add power-domains for TI timer-dm on K3
dt: Add a check for undocumented compatible strings in kernel
kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs
dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML
dt-bindings: i2c: migrate mt7621 text bindings to YAML
dt-bindings: power: gpcv2: correct patternProperties
dt-bindings: virtio: Convert virtio,pci-iommu to DT schema
dt-bindings: timer: arm,arch_timer: Allow dual compatible string
dt-bindings: arm: cpus: Add kryo240 compatible
dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema
dt-bindings: nvmem: u-boot,env: add basic NVMEM cells
dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Just a few bug fixes this time"
* tag 'tpmdd-next-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
selftest: tpm2: Add Client.__del__() to close /dev/tpm* handle
security/keys: Remove inconsistent __user annotation
char: move from strlcpy with unused retval to strscpy
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Feed untrusted RNGs into /dev/random
- Allow HWRNG sleeping to be more interruptible
- Create lib/utils module
- Setting private keys no longer required for akcipher
- Remove tcrypt mode=1000
- Reorganised Kconfig entries
Algorithms:
- Load x86/sha512 based on CPU features
- Add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
Drivers:
- Add HACE crypto driver aspeed"
* tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits)
crypto: aspeed - Remove redundant dev_err call
crypto: scatterwalk - Remove unused inline function scatterwalk_aligned()
crypto: aead - Remove unused inline functions from aead
crypto: bcm - Simplify obtain the name for cipher
crypto: marvell/octeontx - use sysfs_emit() to instead of scnprintf()
hwrng: core - start hwrng kthread also for untrusted sources
crypto: zip - remove the unneeded result variable
crypto: qat - add limit to linked list parsing
crypto: octeontx2 - Remove the unneeded result variable
crypto: ccp - Remove the unneeded result variable
crypto: aspeed - Fix check for platform_get_irq() errors
crypto: virtio - fix memory-leak
crypto: cavium - prevent integer overflow loading firmware
crypto: marvell/octeontx - prevent integer overflows
crypto: aspeed - fix build error when only CRYPTO_DEV_ASPEED is enabled
crypto: hisilicon/qm - fix the qos value initialization
crypto: sun4i-ss - use DEFINE_SHOW_ATTRIBUTE to simplify sun4i_ss_debugfs
crypto: tcrypt - add async speed test for aria cipher
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
crypto: aria - prepare generic module for optimized implementations
...
|
