summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-16xtensa: disable preemption around cache alias management callsMax Filippov
Although cache alias management calls set up and tear down TLB entries and fast_second_level_miss is able to restore TLB entry should it be evicted they absolutely cannot preempt each other because they use the same TLBTEMP area for different purposes. Disable preemption around all cache alias management calls to enforce that. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2020-11-16xtensa: fix TLBTEMP area placementMax Filippov
fast_second_level_miss handler for the TLBTEMP area has an assumption that page table directory entry for the TLBTEMP address range is 0. For it to be true the TLBTEMP area must be aligned to 4MB boundary and not share its 4MB region with anything that may use a page table. This is not true currently: TLBTEMP shares space with vmalloc space which results in the following kinds of runtime errors when fast_second_level_miss loads page table directory entry for the vmalloc space instead of fixing up the TLBTEMP area: Unable to handle kernel paging request at virtual address c7ff0e00 pc = d0009275, ra = 90009478 Oops: sig: 9 [#1] PREEMPT CPU: 1 PID: 61 Comm: kworker/u9:2 Not tainted 5.10.0-rc3-next-20201110-00007-g1fe4962fa983-dirty #58 Workqueue: xprtiod xs_stream_data_receive_workfn a00: 90009478 d11e1dc0 c7ff0e00 00000020 c7ff0000 00000001 7f8b8107 00000000 a08: 900c5992 d11e1d90 d0cc88b8 5506e97c 00000000 5506e97c d06c8074 d11e1d90 pc: d0009275, ps: 00060310, depc: 00000014, excvaddr: c7ff0e00 lbeg: d0009275, lend: d0009287 lcount: 00000003, sar: 00000010 Call Trace: xs_stream_data_receive_workfn+0x43c/0x770 process_one_work+0x1a1/0x324 worker_thread+0x1cc/0x3c0 kthread+0x10d/0x124 ret_from_kernel_thread+0xc/0x18 Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2020-11-16pinctrl: baytrail: Avoid clearing debounce value when turning it offAndy Shevchenko
Baytrail pin control has a common register to set up debounce timeout. When a pin configuration requested debounce to be disabled, the rest of the pins may still want to have debounce enabled and thus rely on the common timeout value. Avoid clearing debounce value when turning it off for one pin while others may still use it. Fixes: 658b476c742f ("pinctrl: baytrail: Add debounce configuration") Depends-on: 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support") Depends-on: 827e1579e1d5 ("pinctrl: baytrail: Rectify debounce support (part 2)") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16pinctrl: merrifield: Set default bias in case no particular value givenAndy Shevchenko
When GPIO library asks pin control to set the bias, it doesn't pass any value of it and argument is considered boolean (and this is true for ACPI GpioIo() / GpioInt() resources, by the way). Thus, individual drivers must behave well, when they got the resistance value of 1 Ohm, i.e. transforming it to sane default. In case of Intel Merrifield pin control hardware the 20 kOhm sounds plausible because it gives a good trade off between weakness and minimization of leakage current (will be only 50 uA with the above choice). Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support") Depends-on: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16pinctrl: jasperlake: Fix HOSTSW_OWN offsetEvan Green
GPIOs that attempt to use interrupts get thwarted with a message like: "pin 161 cannot be used as IRQ" (for instance with SD_CD). This is because the HOSTSW_OWN offset is incorrect, so every GPIO looks like it's owned by ACPI. Fixes: e278dcb7048b1 ("pinctrl: intel: Add Intel Jasper Lake pin controller support") Cc: stable@vger.kernel.org Signed-off-by: Evan Green <evgreen@chromium.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-16pinctrl: jasperlake: Unhide SPI group of pinsAndy Shevchenko
If the group of pins is hidden in the pin list it affects the register offset calculation despite fixed GPIO base. Hence, the offsets of all pins after the hidden group are broken. Instead we have to unhide the group and use a flag to exclude it from GPIO number space. Fixes: e278dcb7048b ("pinctrl: intel: Add Intel Jasper Lake pin controller support") Reported-by: Divagar Mohandass <divagar.mohandass@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16m68k: defconfig: Enable KUnit testsGeert Uytterhoeven
Enable KUnit and all KUnit tests for modular builds, so they are available when needed, just like non-KUnit tests. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20201026122622.3092658-1-geert@linux-m68k.org
2020-11-16m68k: defconfig: Update defconfigs for v5.10-rc1Geert Uytterhoeven
- Enable modular build of SM2 crypto algorithm, - Drop CONFIG_CRYPTO_SM3=m (auto-enabled by CONFIG_CRYPTO_SM2), - Drop CONFIG_TEST_BITFIELD=m (converted to KUnit in commit d2585f5164c298aa ("lib: kunit: add bitfield test conversion to KUnit")), - Enable modular build of the freeing pages test module. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20201026122549.3092526-1-geert@linux-m68k.org
2020-11-16media: fix kernel-doc markupsMauro Carvalho Chehab
Some identifiers have different names between their prototypes and the kernel-doc markup. Seome seems to be due to cut-and-paste related issues. Others need to be fixed, as kernel-doc markups should use this format: identifier - description Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> # IPU3 and V4L2 Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: platform: add missing put_device() call in mtk_jpeg_probe() and ↵Yu Kuai
mtk_jpeg_remove() if mtk_jpeg_clk_init() succeed, mtk_jpeg_probe() and mtk_jpeg_remove() doesn't have a corresponding put_device(). Thus add a new helper mtk_jpeg_clk_release() to fix it. Fixes: b2f0d2724ba4 ("[media] vcodec: mediatek: Add Mediatek JPEG Decoder Driver") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: cedrus: Add support for R40Jernej Skrabec
Video engine in R40 is very similar to that in A33 but it runs on lower speed, at least according to OS images released by board designer. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: dt-bindings: media: allwinner,sun4i-a10-video-engine: Add R40 compatibleJernej Skrabec
Allwinner R40 SoC contains video engine. Add compatible for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: coda: Add a V4L2 user for control error macroblocks countEzequiel Garcia
To avoid potentially overflowing the kernel logs in the case of corrupted streams, this commit replaces an error message with a per-stream counter to be read through a driver-specific control. Applications can read the per-stream accumulated error macroblocks count. The old error message is replaced by a rate-limited debug message. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: coda: coda_buffer_meta housekeeping fixEzequiel Garcia
It's possible that the VPU was initialized using just one buffer, containing only codec headers. In this case, right after the initialization and after updating the FIFO read pointer, we need to iterate through all the coda_buffer_meta and release any metas that have been already used by the VPU. This issue is affecting indirectly the bitstream buffer fill threshold, which depends on the meta end position of the first queued meta, which is passed to coda_bitstream_can_fetch_past(). Without this fix, it's possible that for certain videos, the bitstream buffer level is not filled properly, resulting in a PIC_RUN timeout. Reported-by: Benjamin Bara <benjamin.bara@skidata.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: staging: rkisp1: isp: set metadata pads to MEDIA_BUS_FMT_METADATA_FIXEDDafna Hirschfeld
Set the code of the metadata pads of the isp entity to MEDIA_BUS_FMT_METADATA_FIXED and set the width and height of their formats to 0. This solves the TODO item: "Fix pad format size for statistics and parameters entities." Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: uapi: add MEDIA_BUS_FMT_METADATA_FIXED media bus format.Dafna Hirschfeld
MEDIA_BUS_FMT_METADATA_FIXED should be used when the same driver handles both sides of the link and the bus format is a fixed metadata format that is not configurable from userspace. The width and height will be set to 0 for this format. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: cedrus: fix reference leak in cedrus_start_streamingZhang Qilong
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to pm_runtime_put_noidle will result in reference leak in cedrus_start_streaming. We should fix it. Fixes: d5aecd289babf ("media: cedrus: Implement runtime PM") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: staging: rkisp1: cap: fix runtime PM imbalance on errorZhang Qilong
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to pm_runtime_put_noidle will result in reference imbalance in rkisp1_vb2_start_streaming, so we should fix it. Fixes: 56e3b29f9f6b2 ("media: staging: rkisp1: add streaming paths") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: media/pci: simplify the return expression of verify_window_lockLiu Shixin
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: mtk-vcodec: remove allocated dma_parmsHsin-Yi Wang
Commit 9495b7e92f71 ("driver core: platform: Initialize dma_parms for platform devices") included dma_parms in platform_device. There's no need to allocate again. Fixes: 13483fc2f20f ("media: mtk-vcodec: set dma max segment size") Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: isif: reset global stateEvgeny Novikov
isif_probe() invokes iounmap() on error handling paths, but it does not reset the global state. So, later it can invoke iounmap() even when ioremap() fails. This is the case also for isif_remove(). The patch resets the global state after invoking iounmap() to avoid this. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: imx258: Remove Jason Chen's e-mailSakari Ailus
Remove Jason Chen's e-mail address for it no longer works. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ov5640: fix support of BT656 bus modeHugues Fruchet
Fix PCLK polarity not being taken into account. Add comments about BT656 register control. Remove useless ov5640_set_stream_bt656() function. Refine comments about MIPI IO register control. Fixes: 4039b03720f7 ("media: i2c: ov5640: Add support for BT656 mode") Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Use v4l2_get_link_freq helperSakari Ailus
Use v4l2_get_link_freq helper and add support for sensor drivers implementing only V4L2_CID_PIXEL_RATE. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: v4l: Add a helper for obtaining the link frequencySakari Ailus
Add a helper for obtaining the link frequency from transmitter drivers. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: Documentation: v4l: Document required controls on camera sensorsSakari Ailus
Raw camera sensors connected to parallel or CSI-2 busses need to implement V4L2_CID_LINK_FREQ control so receiver drivers can configure the hardware accordingly. Document this. Also say V4L2_CID_PIXEL_RATE is recommended for such hardware. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: Documentation: v4l: Fix languageSakari Ailus
Remove extra "is" from sentence explaining V4L2_CID_PIXEL_RATE may be used to tell the pixel rate used by a transmitter driver. Also call V4L2_CID_PIXEL_RATE a control. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Check receved the size against payload size, not buffer sizeSakari Ailus
Compare the received size of the payload size, not the allocated size of the buffer that is page aligned. This way also images that aren't aligned to page size are not warned about. Also wrap a line over 80 characters. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ov7670: do not aggregate returnsTom Rix
Adding muliple status together loses individual failures. Check each status separately. Clean up some other returns for consistency. Fixed several coding style problems by running the file through checkpatch.pl --fix-inplace Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: stm32-dcmi: add 8-bit Bayer formats supportAlain Volmat
Add BA81, GBRG, GRBG, RGGB formats in the list of supported capture formats. Signed-off-by: Alain Volmat <alain.volmat@st.com> Acked-by: Hugues FRUCHET <hugues.fruchet@st.com> Reviewed-by: Philippe CORNU <philippe.cornu@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: stm32-dcmi: remove deprecated dmaengine_terminate_all()Hugues Fruchet
Replace dmaengine_terminate_all() by dmaengine_terminate_sync() to ensure that all pending dma operations are really finished. This is not ensured by dmaengine_terminate_all() and this API is deprecated, so better to use the _sync() variant. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Reviewed-by: Philippe CORNU <philippe.cornu@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: stm32-dcmi: don't print an error on probe deferralEtienne Carriere
Change stm32-dcmi driver to not print an error message when the device probe operation is deferred. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Acked-by: Hugues Fruchet <hugues.fruchet@st.com> Tested-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ov5640: add support of 160x120 resolutionHugues Fruchet
Add support of 160x120 resolution. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Remove traces of returned buffersSakari Ailus
If starting a video buffer queue fails, the buffers are returned to videobuf2. Remove the reference to the buffer from the driver's queue as well. Fixes: c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: stable@vger.kernel.org # v4.16 and up Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Rename CIO2_IMAGE_MAX_LENGTH as CIO2_IMAGE_MAX_HEIGHTSakari Ailus
CIO2_IMAGE_MAX_LENGTH is the maximum height of the image. Rename it as "CIO2_IMAGE_MAX_HEIGHT" in order to better describe what it is. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Remove explicit type from frame size checksSakari Ailus
Now that the values are unsigned, we can remove the explicit cast to u32. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Use unsigned values where appropriateSakari Ailus
Use unsigned values for width, height, bit shifts and registers, effectively for all definitions that are not signed. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Make the field on subdev format V4L2_FIELD_NONESakari Ailus
The ipu3-cio2 doesn't make use of the field and this is reflected in V4L2 buffers as well as the try format. Do this in active format, too. Fixes: c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@vger.kernel.org # v4.16 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Validate mbus format in setting subdev formatSakari Ailus
Validate media bus code, width and height when setting the subdev format. This effectively reworks how setting subdev format is implemented in the driver. Fixes: c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@vger.kernel.org # v4.16 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Serialise access to pad formatSakari Ailus
Pad format can be accessed from user space. Serialise access to it. Fixes: c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable@vger.kernel.org # v4.16 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Return actual subdev formatSakari Ailus
Return actual subdev format on ipu3-cio2 subdev pads. The earlier implementation was based on an infinite recursion that exhausted the stack. Reported-by: Tsuchiya Yuto <kitakar@gmail.com> Fixes: c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable@vger.kernel.org # v4.16 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: v4l: subdev: Improve link format validation debug messagesSakari Ailus
The existing link format validation failure debug message in media-entity.c helped to pinpoint the point of failure but provided no additional information what's wrong. Tell the user exactly why the validation failed. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: i2c: ov772x: Add test pattern controlLad Prabhakar
Add support for test pattern control supported by the sensor. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: i2c: ov772x: Add support for BT.656 modeLad Prabhakar
Add support to read the bus-type for V4L2_MBUS_BT656 and enable BT.656 mode in the sensor if needed. For backward compatibility with older DTS where the bus-type property was not mandatory, assume V4L2_MBUS_PARALLEL as it was the only supported bus at the time. v4l2_fwnode_endpoint_alloc_parse() will not fail if 'bus-type' is not specified. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: i2c: ov772x: Parse endpoint propertiesLad Prabhakar
Parse endpoint properties using v4l2_fwnode_endpoint_alloc_parse() to determine the bus type and store it in the driver structure. Set bus_type to V4L2_MBUS_PARALLEL as it's the only supported one Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: rcar-csi2: Set bus type when parsing fwnodeNiklas Söderlund
The only supported bus for the R-Car CSI-2 driver is CSI-2 DPHY, specify this before parsing the fwnode. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: rcar-csi2: Switch to using fwnode instead of OFNiklas Söderlund
Use the fwnode_graph_get_endpoint_by_id() interface instead of of_graph_get_endpoint_by_regs() to fetch the fwnode. This saves translating between a device_node and fwnode_handle. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: MAINTAINERS: Add ADV7604 bindings documentationNiklas Söderlund
Add the YAML dt-bindings document for ADV7604. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: dt-bindings: adv7604: Convert bindings to json-schemaNiklas Söderlund
Convert ADV7604 video decoder documentation to json-schema. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: dt-bindings: adv7604: Fix documentation for hpd-gpiosNiklas Söderlund
As of [1] the hpd-gpios property is optional, document it as such. 1. commit 269bd1324fbfaa52 ("[media] media: adv7604: improve usage of gpiod API") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-25 19:59:40 +0000