| Age | Commit message (Collapse) | Author |
|---|
|
Christophe Roullier says:
====================
Series to deliver Ethernet for STM32MP25
STM32MP25 is STM32 SOC with 2 GMACs instances.
GMAC IP version is SNPS 5.3x.
GMAC IP configure with 2 RX and 4 TX queue.
DMA HW capability register supported
RX Checksum Offload Engine supported
TX Checksum insertion supported
Wake-Up On Lan supported
TSO supported
====================
Link: https://lore.kernel.org/r/20240624071052.118042-1-christophe.roullier@foss.st.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add Ethernet support for STM32MP25.
STM32MP25 is STM32 SOC with 2 GMACs instances.
GMAC IP version is SNPS 5.3x.
GMAC IP configure with 2 RX and 4 TX queue.
DMA HW capability register supported
RX Checksum Offload Engine supported
TX Checksum insertion supported
Wake-Up On Lan supported
TSO supported
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
New STM32 SOC have 2 GMACs instances.
GMAC IP version is SNPS 5.30
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.10-2024-06-26:
amdgpu:
- SMU 14.x fix
- vram info parsing fix
- mode1 reset fix
- LTTPR fix
- Virtual display fix
- Avoid spurious error in PSP init
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626221408.2019633-1-alexander.deucher@amd.com
|
|
Add the following Telit FN912 compositions:
0x3000: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag)
T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=3000 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN912
S: SerialNumber=92c4c4d8
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x3001: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb
T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=3001 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN912
S: SerialNumber=92c4c4d8
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.10-rc6:
- nouveau tv mode fixes.
- Add KOE TX26D202VM0BWA timings.
- Fix fb_info when vmalloc is used, regression from
CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2e596c1e-9389-43c2-a029-06fe741c44c3@linux.intel.com
|
|
again after probe failed
The expander phy will be treated as broadcast flutter in the next
revalidation after the exp-attached end device probe failed, as follows:
[78779.654026] sas: broadcast received: 0
[78779.654037] sas: REVALIDATING DOMAIN on port 0, pid:10
[78779.654680] sas: ex 500e004aaaaaaa1f phy05 change count has changed
[78779.662977] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE)
[78779.662986] sas: ex 500e004aaaaaaa1f phy05 new device attached
[78779.663079] sas: ex 500e004aaaaaaa1f phy05:U:8 attached: 500e004aaaaaaa05 (stp)
[78779.693542] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] found
[78779.701155] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0
[78779.707864] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
...
[78835.161307] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[78835.171344] sas: sas_probe_sata: for exp-attached device 500e004aaaaaaa05 returned -19
[78835.180879] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] is gone
[78835.187487] sas: broadcast received: 0
[78835.187504] sas: REVALIDATING DOMAIN on port 0, pid:10
[78835.188263] sas: ex 500e004aaaaaaa1f phy05 change count has changed
[78835.195870] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE)
[78835.195875] sas: ex 500e004aaaaaaa1f rediscovering phy05
[78835.196022] sas: ex 500e004aaaaaaa1f phy05:U:A attached: 500e004aaaaaaa05 (stp)
[78835.196026] sas: ex 500e004aaaaaaa1f phy05 broadcast flutter
[78835.197615] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0
The cause of the problem is that the related ex_phy's attached_sas_addr was
not cleared after the end device probe failed, so reset it.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Link: https://lore.kernel.org/r/20240619091742.25465-1-yangxingui@huawei.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Jakub Kicinski says:
====================
selftests: drv-net: rss_ctx: add tests for RSS contexts
Add a few tests exercising RSS context API.
In addition to basic sanity checks, tests add RSS contexts,
n-tuple rule to direct traffic to them (based on dst port),
and qstats to make sure traffic landed where we expected.
v2 adds a test for removing contexts out of order. When testing
bnxt - either the new test or running more tests after the overlap
test makes the device act strangely. To the point where it may start
giving out ntuple IDs of 0 for all rules..
$ export NETIF=eth0 REMOTE_...
$ ./drivers/net/hw/rss_ctx.py
KTAP version 1
1..8
ok 1 rss_ctx.test_rss_key_indir
ok 2 rss_ctx.test_rss_context
ok 3 rss_ctx.test_rss_context4
# Increasing queue count 44 -> 66
# Failed to create context 32, trying to test what we got
ok 4 rss_ctx.test_rss_context32 # SKIP Tested only 31 contexts, wanted 32
ok 5 rss_ctx.test_rss_context_overlap
ok 6 rss_ctx.test_rss_context_overlap2
# .. sprays traffic like a headless chicken ..
not ok 7 rss_ctx.test_rss_context_out_of_order
ok 8 rss_ctx.test_rss_context4_create_with_cfg
# Totals: pass:6 fail:1 xfail:0 xpass:0 skip:1 error:0
v2: https://lore.kernel.org/all/20240625010210.2002310-1-kuba@kernel.org
v1: https://lore.kernel.org/all/20240620232902.1343834-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20240626012456.2326192-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests focusing on indirection table configuration and
creating extra RSS contexts in drivers which support it.
$ export NETIF=eth0 REMOTE_...
$ ./drivers/net/hw/rss_ctx.py
KTAP version 1
1..8
ok 1 rss_ctx.test_rss_key_indir
ok 2 rss_ctx.test_rss_context
ok 3 rss_ctx.test_rss_context4
# Increasing queue count 44 -> 66
# Failed to create context 32, trying to test what we got
ok 4 rss_ctx.test_rss_context32 # SKIP Tested only 31 contexts, wanted 32
ok 5 rss_ctx.test_rss_context_overlap
ok 6 rss_ctx.test_rss_context_overlap2
# .. sprays traffic like a headless chicken ..
not ok 7 rss_ctx.test_rss_context_out_of_order
ok 8 rss_ctx.test_rss_context4_create_with_cfg
# Totals: pass:6 fail:1 xfail:0 xpass:0 skip:1 error:0
Note that rss_ctx.test_rss_context_out_of_order fails with the device
I tested with, but it seems to be a device / driver bug.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626012456.2326192-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Teach the load generator how to wait for at least given number
of packets to be received. This will be useful for filtering
where we'll want to send a non-trivial number of packets and
make sure they landed in right queues.
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626012456.2326192-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some devices DMA stats to the host periodically. Add a helper
which can wait for that to happen, based on frequency reported
by the driver in ethtool.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626012456.2326192-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We use random ports for communication. As Willem predicted
this leads to occasional failures. Try to check if port is
already in use by opening a socket and binding to that port.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626012456.2326192-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TX power index is read from the efuse on init, the values get written to
the TX power registers when the channel gets switched.
When the chip has not yet been calibrated, the efuse values are 0xFF,
which on some boards leads to USB timeouts for reading/writing registers
after the first frames have been sent.
The vendor driver (v5.11.5-1) checks for these invalid values and sets
default values instead. Implement something similar in
rtl8188fu_parse_efuse().
Fixes: c888183b21f3 ("wifi: rtl8xxxu: Support new chip RTL8188FU")
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240624140037.231657-1-martin.kaistra@linutronix.de
|
|
An incorrect definition caused DPK to fail to backup and
restore a set of KIP registers. Fixing this will improve
RX throughput from 902 to 997 Mbps.
Fixes: 5b8471ace5b1 ("wifi: rtw89: 8852b: rfk: add DPK")
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240621123617.6687-2-pkshih@realtek.com
|
|
Enlarge AMSDU limit to improve MAC efficient to get better TX throughput
from 851 to 895 Mbps. No change for RX throughput 902 Mbps.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240621123617.6687-1-pkshih@realtek.com
|
|
DPK is short for digital pre-distortion calibration. It can adjusts digital
waveform according to PA linear characteristics dynamically to enhance
TX EVM for high power.
Do this calibration when we are going to run on AP channel. To prevent
power offset out of boundary, it monitors thermal and set proper boundary
to register.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240621073458.55187-3-pkshih@realtek.com
|
|
TSSI is transmitter signal strength indication, which is a close-loop
hardware circuit to feedback actual transmitting power as a reference for
next transmission.
It does full calibration when we are going to connect an AP. When switching
bands or channels for scanning or some reasons, reset hardware status to
prevent use wrong power value feedback from previous transmission.
It also loads tables of compensation values reflecting current temperature
into registers according to channel and band group to transmit packets
with expected power.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240621073458.55187-2-pkshih@realtek.com
|
|
We add polling after sending LPS H2C to ensure that the Firmware is
received and executes RPWM thereafter. Otherwise, if the Firmware
executes RPWM without receiving LPS H2C, it will cause beacon loss in
WoWLAN mode due to the inability to obtain channel and bandwidth
information from H2C.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240620055825.17592-8-pkshih@realtek.com
|
|
To avoid wake up by AP disconnection, but no beacon filter setting and
driver can't disconnect successfully. We need to enable beacon filter
after swapping firmware in WoWLAN mode.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240620055825.17592-7-pkshih@realtek.com
|
|
While downloading Firmware in the resume flow, it is possible to receive
beacon and send H2C to Firmware. However, if Firmware receives unexpected
H2C during the download process, it will fail. Therefore, we prevent to
send unexpected H2C during download Firmware in WoWLAN mode.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240620055825.17592-6-pkshih@realtek.com
|
|
We mistakenly put skb too large and that may exceed skb->end.
Therefore, we fix it.
skbuff: skb_over_panic: text:ffffffffc09e9a9d len:416 put:204 head:ffff8fba04eca780 data:ffff8fba04eca7e0 tail:0x200 end:0x140 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:192!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 4747 Comm: kworker/u4:44 Tainted: G O 6.6.30-02659-gc18865c4dfbd #1 86547039b47e46935493f615ee31d0b2d711d35e
Hardware name: HP Meep/Meep, BIOS Google_Meep.11297.262.0 03/18/2021
Workqueue: events_unbound async_run_entry_fn
RIP: 0010:skb_panic+0x5d/0x60
Code: c6 63 8b 8f bb 4c 0f 45 f6 48 c7 c7 4d 89 8b bb 48 89 ce 44 89 d1 41 56 53 41 53 ff b0 c8 00 00 00 e8 27 5f 23 00 48 83 c4 20 <0f> 0b 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44
RSP: 0018:ffffaa700144bad0 EFLAGS: 00010282
RAX: 0000000000000089 RBX: 0000000000000140 RCX: 14432c5aad26c900
RDX: 0000000000000000 RSI: 00000000ffffdfff RDI: 0000000000000001
RBP: ffffaa700144bae0 R08: 0000000000000000 R09: ffffaa700144b920
R10: 00000000ffffdfff R11: ffffffffbc28fbc0 R12: ffff8fba4e57a010
R13: 0000000000000000 R14: ffffffffbb8f8b63 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8fba7bd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007999c4ad1000 CR3: 000000015503a000 CR4: 0000000000350ee0
Call Trace:
<TASK>
? __die_body+0x1f/0x70
? die+0x3d/0x60
? do_trap+0xa4/0x110
? skb_panic+0x5d/0x60
? do_error_trap+0x6d/0x90
? skb_panic+0x5d/0x60
? handle_invalid_op+0x30/0x40
? skb_panic+0x5d/0x60
? exc_invalid_op+0x3c/0x50
? asm_exc_invalid_op+0x16/0x20
? skb_panic+0x5d/0x60
skb_put+0x49/0x50
rtw89_fw_h2c_wow_gtk_ofld+0xbd/0x220 [rtw89_core 778b32de31cd1f14df2d6721ae99ba8a83636fa5]
rtw89_wow_resume+0x31f/0x540 [rtw89_core 778b32de31cd1f14df2d6721ae99ba8a83636fa5]
rtw89_ops_resume+0x2b/0xa0 [rtw89_core 778b32de31cd1f14df2d6721ae99ba8a83636fa5]
ieee80211_reconfig+0x84/0x13e0 [mac80211 818a894e3b77da6298269c59ed7cdff065a4ed52]
? __pfx_wiphy_resume+0x10/0x10 [cfg80211 1a793119e2aeb157c4ca4091ff8e1d9ae233b59d]
? dev_printk_emit+0x51/0x70
? _dev_info+0x6e/0x90
? __pfx_wiphy_resume+0x10/0x10 [cfg80211 1a793119e2aeb157c4ca4091ff8e1d9ae233b59d]
wiphy_resume+0x89/0x180 [cfg80211 1a793119e2aeb157c4ca4091ff8e1d9ae233b59d]
? __pfx_wiphy_resume+0x10/0x10 [cfg80211 1a793119e2aeb157c4ca4091ff8e1d9ae233b59d]
dpm_run_callback+0x3c/0x140
device_resume+0x1f9/0x3c0
? __pfx_dpm_watchdog_handler+0x10/0x10
async_resume+0x1d/0x30
async_run_entry_fn+0x29/0xd0
process_scheduled_works+0x1d8/0x3d0
worker_thread+0x1fc/0x2f0
kthread+0xed/0x110
? __pfx_worker_thread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x38/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Modules linked in: ccm 8021q r8153_ecm cdc_ether usbnet r8152 mii dm_integrity async_xor xor async_tx lz4 lz4_compress zstd zstd_compress zram zsmalloc uinput rfcomm cmac algif_hash rtw89_8922ae(O) algif_skcipher rtw89_8922a(O) af_alg rtw89_pci(O) rtw89_core(O) btusb(O) snd_soc_sst_bxt_da7219_max98357a btbcm(O) snd_soc_hdac_hdmi btintel(O) snd_soc_intel_hda_dsp_common snd_sof_probes btrtl(O) btmtk(O) snd_hda_codec_hdmi snd_soc_dmic uvcvideo videobuf2_vmalloc uvc videobuf2_memops videobuf2_v4l2 videobuf2_common snd_sof_pci_intel_apl snd_sof_intel_hda_common snd_soc_hdac_hda snd_sof_intel_hda soundwire_intel soundwire_generic_allocation snd_sof_intel_hda_mlink soundwire_cadence snd_sof_pci snd_sof_xtensa_dsp mac80211 snd_soc_acpi_intel_match snd_soc_acpi snd_sof snd_sof_utils soundwire_bus snd_soc_max98357a snd_soc_avs snd_soc_hda_codec snd_hda_ext_core snd_intel_dspcfg snd_intel_sdw_acpi snd_soc_da7219 snd_hda_codec snd_hwdep snd_hda_core veth ip6table_nat xt_MASQUERADE xt_cgroup fuse bluetooth ecdh_generic
cfg80211 ecc
gsmi: Log Shutdown Reason 0x03
---[ end trace 0000000000000000 ]---
Fixes: ed9a3c0d4dd9 ("wifi: rtw89: wow: construct EAPoL packet for GTK rekey offload")
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240620055825.17592-5-pkshih@realtek.com
|
|
The 802.11ax chip also needs rtw89_mac_cpu_io_rx(), which notifies Firmware
to start or stop WoWLAN and waits until Firmware process over. Then,
the driver can continue processing to avoid unexpected behavior.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240620055825.17592-4-pkshih@realtek.com
|
|
Need to update WoWLAN wakeup reason register after firmware version
0.35.22.0 for RTL8922A, and 0.27.80.0 for RTL8852CE.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240620055825.17592-3-pkshih@realtek.com
|
|
When creating EAPOL_KEY, SA_QUERY and ARP_RSP packet offload, we need
to append security header offset for different cipher as required by
the firmware. Only 8852A, 8852B, 8852BT and 8851B need it.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240620055825.17592-2-pkshih@realtek.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes, 7 are cc:stable.
All are MM related apart from a MAINTAINERS update. There is no
identifiable theme here - just singleton patches in various places"
* tag 'mm-hotfixes-stable-2024-06-26-17-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/memory: don't require head page for do_set_pmd()
mm/page_alloc: Separate THP PCP into movable and non-movable categories
nfs: drop the incorrect assertion in nfs_swap_rw()
mm/migrate: make migrate_pages_batch() stats consistent
MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
selftests/mm:fix test_prctl_fork_exec return failure
mm: convert page type macros to enum
ocfs2: fix DIO failure due to insufficient transaction credits
kasan: fix bad call to unpoison_slab_object
mm: handle profiling for fake memory allocations during compaction
mm/slab: fix 'variable obj_exts set but not used' warning
/proc/pid/smaps: add mseal info for vma
mm: fix incorrect vbq reference in purge_fragmented_block
|
|
ARRAY_SIZE is used on multiple places, move its definition in
bpf_misc.h header.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20240626134719.3893748-1-jolsa@kernel.org
|
|
When building with clang for ARCH=i386, the following errors are
observed:
CC kernel/bpf/btf_relocate.o
./tools/lib/bpf/btf_relocate.c:206:23: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
206 | info[id].needs_size = true;
| ^ ~
./tools/lib/bpf/btf_relocate.c:256:25: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
256 | base_info.needs_size = true;
| ^ ~
2 errors generated.
The problem is we use 1-bit, 31-bit bitfields in a signed int.
Changing to
bool needs_size: 1;
unsigned int size:31;
...resolves the error and pahole reports that 4 bytes are used
for the underlying representation:
$ pahole btf_name_info tools/lib/bpf/btf_relocate.o
struct btf_name_info {
const char * name; /* 0 8 */
unsigned int needs_size:1; /* 8: 0 4 */
unsigned int size:31; /* 8: 1 4 */
__u32 id; /* 12 4 */
/* size: 16, cachelines: 1, members: 4 */
/* last cacheline: 16 bytes */
};
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240624192903.854261-1-alan.maguire@oracle.com
|
|
Guard close() with extra link_fd[i] > 0 and fexit_fd[i] > 0
check to prevent close(-1).
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240623131753.2133829-1-make24@iscas.ac.cn
|
|
register store validation for NFT_DATA_VALUE is conditional, however,
the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This
only requires a new helper function to infer the register type from the
set datatype so this conditional check can be removed. Otherwise,
pointer to chain object can be leaked through the registers.
Fixes: 96518518cc41 ("netfilter: add nftables")
Reported-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"Two patches to fix kworker name formatting"
* tag 'wq-for-6.10-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Increase worker desc's length to 32
workqueue: Refactor worker ID formatting and make wq_worker_comm() use full ID string
|
|
and reg->type check
Add new negative selftests which are intended to cover the
out-of-bounds memory access that could be performed on a
CONST_PTR_TO_DYNPTR within functions taking a ARG_PTR_TO_DYNPTR |
MEM_RDONLY as an argument, and acceptance of invalid register types
i.e. PTR_TO_BTF_ID within functions taking a ARG_PTR_TO_DYNPTR |
MEM_RDONLY.
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20240625062857.92760-2-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
accesses
Currently, it's possible to pass in a modified CONST_PTR_TO_DYNPTR to
a global function as an argument. The adverse effects of this is that
BPF helpers can continue to make use of this modified
CONST_PTR_TO_DYNPTR from within the context of the global function,
which can unintentionally result in out-of-bounds memory accesses and
therefore compromise overall system stability i.e.
[ 244.157771] BUG: KASAN: slab-out-of-bounds in bpf_dynptr_data+0x137/0x140
[ 244.161345] Read of size 8 at addr ffff88810914be68 by task test_progs/302
[ 244.167151] CPU: 0 PID: 302 Comm: test_progs Tainted: G O E 6.10.0-rc3-00131-g66b586715063 #533
[ 244.174318] Call Trace:
[ 244.175787] <TASK>
[ 244.177356] dump_stack_lvl+0x66/0xa0
[ 244.179531] print_report+0xce/0x670
[ 244.182314] ? __virt_addr_valid+0x200/0x3e0
[ 244.184908] kasan_report+0xd7/0x110
[ 244.187408] ? bpf_dynptr_data+0x137/0x140
[ 244.189714] ? bpf_dynptr_data+0x137/0x140
[ 244.192020] bpf_dynptr_data+0x137/0x140
[ 244.194264] bpf_prog_b02a02fdd2bdc5fa_global_call_bpf_dynptr_data+0x22/0x26
[ 244.198044] bpf_prog_b0fe7b9d7dc3abde_callback_adjust_bpf_dynptr_reg_off+0x1f/0x23
[ 244.202136] bpf_user_ringbuf_drain+0x2c7/0x570
[ 244.204744] ? 0xffffffffc0009e58
[ 244.206593] ? __pfx_bpf_user_ringbuf_drain+0x10/0x10
[ 244.209795] bpf_prog_33ab33f6a804ba2d_user_ringbuf_callback_const_ptr_to_dynptr_reg_off+0x47/0x4b
[ 244.215922] bpf_trampoline_6442502480+0x43/0xe3
[ 244.218691] __x64_sys_prlimit64+0x9/0xf0
[ 244.220912] do_syscall_64+0xc1/0x1d0
[ 244.223043] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 244.226458] RIP: 0033:0x7ffa3eb8f059
[ 244.228582] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8f 1d 0d 00 f7 d8 64 89 01 48
[ 244.241307] RSP: 002b:00007ffa3e9c6eb8 EFLAGS: 00000206 ORIG_RAX: 000000000000012e
[ 244.246474] RAX: ffffffffffffffda RBX: 00007ffa3e9c7cdc RCX: 00007ffa3eb8f059
[ 244.250478] RDX: 00007ffa3eb162b4 RSI: 0000000000000000 RDI: 00007ffa3e9c7fb0
[ 244.255396] RBP: 00007ffa3e9c6ed0 R08: 00007ffa3e9c76c0 R09: 0000000000000000
[ 244.260195] R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffff80
[ 244.264201] R13: 000000000000001c R14: 00007ffc5d6b4260 R15: 00007ffa3e1c7000
[ 244.268303] </TASK>
Add a check_func_arg_reg_off() to the path in which the BPF verifier
verifies the arguments of global function arguments, specifically
those which take an argument of type ARG_PTR_TO_DYNPTR |
MEM_RDONLY. Also, process_dynptr_func() doesn't appear to perform any
explicit and strict type matching on the supplied register type, so
let's also enforce that a register either type PTR_TO_STACK or
CONST_PTR_TO_DYNPTR is by the caller.
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20240625062857.92760-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.10
A relatively large batch of updates, largely due to the long interval
since I last sent fixes due to various travel and holidays. There's a
lot of driver specific fixes and quirks in here, none of them too major,
and also some fixes for recently introduced memory safety issues in the
topology code.
|
|
The non-contiguous CBM test fails on AMD with:
Starting L3_NONCONT_CAT test ...
Mounting resctrl to "/sys/fs/resctrl"
CPUID output doesn't match 'sparse_masks' file content!
not ok 5 L3_NONCONT_CAT: test
AMD always supports non-contiguous CBM but does not report it via CPUID.
Fix the non-contiguous CBM test to use CPUID to discover non-contiguous
CBM support only on Intel.
Fixes: ae638551ab64 ("selftests/resctrl: Add non-contiguous CBMs CAT test")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Use the "abspath" call when symlinking the gdb python scripts in
scripts/gdb/linux. This call is needed to avoid broken links when
running the scripts_gdb target on a build directory located directly
under the source tree (e.g., O=builddir).
Fixes: 659bbf7e1b08 ("kbuild: scripts/gdb: Replace missed $(srctree)/$(src) w/ $(src)")
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The currently existing of_property_present check for interrupts does not
cover all ways interrupts can be defined in a device tree, e.g.
"interrupts-extended".
In order to support all current and future ways that can be done, drop that
check and call of_irq_parse_one to figure out if an interrupt is defined
and irq_create_of_mapping for the actual mapping and let it be handled by
the interrupt subsystem.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240622215416.659208-1-knaerzche@gmail.com
|
|
After being asked about support for WPA3 for BCM43224 chipset it
was found that all it takes is setting the MFP_CAPABLE flag and
mac80211 will take care of all that is needed [1].
Link: https://lore.kernel.org/linux-wireless/20200526155909.5807-2-Larry.Finger@lwfinger.net/ [1]
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Tested-by: Reijer Boekhoff <reijerboekhoff@protonmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240617122609.349582-1-arend.vanspriel@broadcom.com
|
|
ath.git tree has moved to a new location. The old location will be an alias to
the new location and will work at least until end of 2024, but best to update
git trees already now.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240626102632.1554485-1-kvalo@kernel.org
|
|
We got sad news that Larry is not with us anymore. He was a long time
Linux developer, his first commit was back in 2005 and he has
maintained several wireless drivers over the years. He was known for
patiently supporting Linux users with all sorts of problems they had.
Larry's work helped so many people around the world and I always
enjoyed working with him, even though I sadly never met him.
Rest in Peace, Larry. You will be missed.
Link: https://lore.kernel.org/all/77997185-86a6-41c5-af7a-74e4e9064437@lwfinger.net/
Link: https://arstechnica.com/gadgets/2024/06/larry-finger-linux-wireless-hero-was-a-persistent-patient-coder-and-mentor/
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240625103929.1332926-1-kvalo@kernel.org
|
|
Work for __counted_by on generic pointers in structures (not just
flexible array members) has started landing in Clang 19 (current tip of
tree). During the development of this feature, a restriction was added
to __counted_by to prevent the flexible array member's element type from
including a flexible array member itself such as:
struct foo {
int count;
char buf[];
};
struct bar {
int count;
struct foo data[] __counted_by(count);
};
because the size of data cannot be calculated with the standard array
size formula:
sizeof(struct foo) * count
This restriction was downgraded to a warning but due to CONFIG_WERROR,
it can still break the build. The application of __counted_by on the fod
member of 'struct nvmet_fc_tgt_queue' triggers this restriction,
resulting in:
drivers/nvme/target/fc.c:151:2: error: 'counted_by' should not be applied to an array with element of unknown size because 'struct nvmet_fc_fcp_iod' is a struct type with a flexible array member. This will be an error in a future compiler version [-Werror,-Wbounds-safety-counted-by-elt-type-unknown-size]
151 | struct nvmet_fc_fcp_iod fod[] __counted_by(sqsize);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Remove this use of __counted_by to fix the warning/error. However,
rather than remove it altogether, leave it commented, as it may be
possible to support this in future compiler releases.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2027
Fixes: ccd3129aca28 ("nvmet-fc: Annotate struct nvmet_fc_tgt_queue with __counted_by")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Currently, the Rx data path only supports parsing peer metadata of version
zero. However, the QCN9274 platform configures the peer metadata version
as V1B. When V1B peer metadata is parsed using the version zero logic,
invalid data is populated, causing valid packets to be dropped. To address
this issue, refactor the peer metadata version and add the version based
parsing to populate the data from peer metadata correctly.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: 287033810990 ("wifi: ath12k: add support for peer meta data version")
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240624145418.2043461-1-quic_periyasa@quicinc.com
|
|
Pdev id from mac phy capabilities will be sent as a part of
HTT/WMI command to firmware. This causes issue with single pdev
devices where firmware does not respond to the WMI/HTT request
sent from host.
For single pdev devices firmware expects pdev id as 1 for 5 GHz/6 GHz
phy and 2 for 2 GHz band. Add wrapper ath12k_mac_get_target_pdev_id()
to help fetch right pdev for single pdev devices.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240621102809.3984004-1-quic_rgnanase@quicinc.com
|
|
Modify register setting sequence of enabling inline command
to fix issue of random interrupt from push-button.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/9a7a3a66cbcb426487ca6f558f45e922@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The conversion of SPP to MIDI2 UMP called a wrong function, and the
secondary argument wasn't taken. As a result, MSB of SPP was always
zero. Fix to call the right function.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Link: https://patch.msgid.link/20240626145141.16648-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Petr Machata says:
====================
mlxsw: Reduce memory footprint of mlxsw driver
Amit Cohen writes:
A previous patch-set used page pool to allocate buffers, to simplify the
change, we first used one continuous buffer, which was allocated with
order > 0. This set improves page pool usage to allocate the exact number
of pages which are required for packet.
This change requires using fragmented SKB, till now all the buffer was in
the linear part. Note that 'skb->truesize' is decreased for small packets.
This set significantly reduces memory consumption of mlxsw driver. The
footprint is reduced by 26%.
Patch set overview:
Patch #1 calculates number of scatter/gather entries and stores the value
Patch #2 converts the driver to use fragmented buffers
====================
Link: https://patch.msgid.link/cover.1719321422.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
WQE (Work Queue Element) includes 3 scatter/gather entries for buffers.
The buffer can be split into 3 parts, software should set address and byte
count of each part.
A previous patch-set used page pool to allocate buffers, to simplify the
change, we first used one continuous buffer, which was allocated with
order > 0. This patch improves page pool usage to allocate the exact
number of pages which are required for packet.
As part of init, fill WQE.address[x] and WQE.byte_count* with pages which
are allocated from the pool. Fill x entries according to number of
scatter/gather entries which are required for maximum packet size. When a
packet is received, check the actual size and replace only the used pages.
Save bytes for software overhead only as part of the first entry.
This change also requires using fragmented SKB, till now all the buffer
was in the linear part. Note that 'skb->truesize' is decreased for small
packets.
For now the maximum buffer size is 3 * PAGE_SIZE which is enough, in
case that the driver will support larger MTU, we can use 'order' to
allocate more than one page per scatter/gather entry.
This change significantly reduces memory consumption of mlxsw driver. The
footprint is reduced by 26%.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/ee38898c692e7f644a7f3ea4d33aeddb4dd917d2.1719321422.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A previous patch-set used page pool for Rx buffers allocations. To
simplify the change, we first used page pool for one allocation per
packet - one continuous buffer is allocated for each packet. This can be
improved by using fragmented buffers, then memory consumption will be
significantly reduced.
WQE (Work Queue Element) includes up to 3 scatter/gather entries for
data. As preparation for fragmented buffer usage, calculate number of
scatter/gather entries which are required for packet according to
maximum MTU and store it for future use. For now use PAGE_SIZE for each
entry, which means that maximum buffer size is 3 * PAGE_SIZE. This is
enough for the maximum MTU which is supported in the driver now (10K).
Warn in an unlikely case of maximum MTU which requires more than 3 pages,
for now this warn should not happen with standard page size (>=4K) and
maximum MTU (10K).
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/98c3e3adb7e727e571ac538faf67cef262cec4fc.1719321422.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This first patch in the larger series is a fix, so I'm merging it into
fixes while the rest of the patch set is still under development.
* b4-shazam-merge:
riscv: stacktrace: convert arch_stack_walk() to noinstr
Link: https://lore.kernel.org/r/20240613-dev-andyc-dyn-ftrace-v4-v1-0-1a538e12c01e@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
arch_stack_walk() is called intensively in function_graph when the
kernel is compiled with CONFIG_TRACE_IRQFLAGS. As a result, the kernel
logs a lot of arch_stack_walk and its sub-functions into the ftrace
buffer. However, these functions should not appear on the trace log
because they are part of the ftrace itself. This patch references what
arm64 does for the smae function. So it further prevent the re-enter
kprobe issue, which is also possible on riscv.
Related-to: commit 0fbcd8abf337 ("arm64: Prohibit instrumentation on arch_stack_walk()")
Fixes: 680341382da5 ("riscv: add CALLER_ADDRx support")
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240613-dev-andyc-dyn-ftrace-v4-v1-1-1a538e12c01e@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
We cannot delay the icache flush after patching some functions as we may
have patched a function that will get called before the icache flush.
The only way to completely avoid such scenario is by flushing the icache
as soon as we patch a function. This will probably be costly as we don't
batch the icache maintenance anymore.
Fixes: 6ca445d8af0e ("riscv: Fix early ftrace nop patching")
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Closes: https://lore.kernel.org/linux-riscv/20240613-lubricant-breath-061192a9489a@wendy/
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20240624082141.153871-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
