| Age | Commit message (Collapse) | Author |
|---|
|
qca8k_port_bridge_join() set QCA8K_PORT_LOOKUP_CTRL() for i == port twice,
once in the loop handling all other port's masks, and finally at the end
with the accumulated port_mask.
The first time it would incorrectly set the port's own bit in the mask,
only to correct the mistake a moment later. qca8k_port_bridge_leave() had
the same issue, but here the regmap_clear_bits() was a no-op rather than
setting an unintended value.
Remove the duplicate assignment by skipping the whole loop iteration for
i == port. The unintended bit setting doesn't seem to have any negative
effects (even when not reverted right away), so the change is submitted
as a simple cleanup rather than a fix.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported a lockdep violation involving bridge driver [1]
Make sure netdev_rename_lock is softirq safe to fix this issue.
[1]
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
6.10.0-rc2-syzkaller-00249-gbe27b8965297 #0 Not tainted
-----------------------------------------------------
syz-executor.2/9449 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire:
ffffffff8f5de668 (netdev_rename_lock.seqcount){+.+.}-{0:0}, at: rtnl_fill_ifinfo+0x38e/0x2270 net/core/rtnetlink.c:1839
and this task is already holding:
ffff888060c64cb8 (&br->lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline]
ffff888060c64cb8 (&br->lock){+.-.}-{2:2}, at: br_port_slave_changelink+0x3d/0x150 net/bridge/br_netlink.c:1212
which would create a new lock dependency:
(&br->lock){+.-.}-{2:2} -> (netdev_rename_lock.seqcount){+.+.}-{0:0}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&br->lock){+.-.}-{2:2}
... which became SOFTIRQ-irq-safe at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:351 [inline]
br_forward_delay_timer_expired+0x50/0x440 net/bridge/br_stp_timer.c:86
call_timer_fn+0x18e/0x650 kernel/time/timer.c:1792
expire_timers kernel/time/timer.c:1843 [inline]
__run_timers kernel/time/timer.c:2417 [inline]
__run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2428
run_timer_base kernel/time/timer.c:2437 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2447
handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
__do_softirq kernel/softirq.c:588 [inline]
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637
irq_exit_rcu+0x9/0x30 kernel/softirq.c:649
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
lock_acquire+0x264/0x550 kernel/locking/lockdep.c:5758
fs_reclaim_acquire+0xaf/0x140 mm/page_alloc.c:3800
might_alloc include/linux/sched/mm.h:334 [inline]
slab_pre_alloc_hook mm/slub.c:3890 [inline]
slab_alloc_node mm/slub.c:3980 [inline]
kmalloc_trace_noprof+0x3d/0x2c0 mm/slub.c:4147
kmalloc_noprof include/linux/slab.h:660 [inline]
kzalloc_noprof include/linux/slab.h:778 [inline]
class_dir_create_and_add drivers/base/core.c:3255 [inline]
get_device_parent+0x2a7/0x410 drivers/base/core.c:3315
device_add+0x325/0xbf0 drivers/base/core.c:3645
netdev_register_kobject+0x17e/0x320 net/core/net-sysfs.c:2136
register_netdevice+0x11d5/0x19e0 net/core/dev.c:10375
nsim_init_netdevsim drivers/net/netdevsim/netdev.c:690 [inline]
nsim_create+0x647/0x890 drivers/net/netdevsim/netdev.c:750
__nsim_dev_port_add+0x6c0/0xae0 drivers/net/netdevsim/dev.c:1390
nsim_dev_port_add_all drivers/net/netdevsim/dev.c:1446 [inline]
nsim_dev_reload_create drivers/net/netdevsim/dev.c:1498 [inline]
nsim_dev_reload_up+0x69b/0x8e0 drivers/net/netdevsim/dev.c:985
devlink_reload+0x478/0x870 net/devlink/dev.c:474
devlink_nl_reload_doit+0xbd6/0xe50 net/devlink/dev.c:586
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2585
___sys_sendmsg net/socket.c:2639 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2668
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
to a SOFTIRQ-irq-unsafe lock:
(netdev_rename_lock.seqcount){+.+.}-{0:0}
... which became SOFTIRQ-irq-unsafe at:
...
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
do_write_seqcount_begin_nested include/linux/seqlock.h:469 [inline]
do_write_seqcount_begin include/linux/seqlock.h:495 [inline]
write_seqlock include/linux/seqlock.h:823 [inline]
dev_change_name+0x184/0x920 net/core/dev.c:1229
do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2880
__rtnl_newlink net/core/rtnetlink.c:3696 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
__sys_sendto+0x3a4/0x4f0 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(netdev_rename_lock.seqcount);
local_irq_disable();
lock(&br->lock);
lock(netdev_rename_lock.seqcount);
<Interrupt>
lock(&br->lock);
*** DEADLOCK ***
3 locks held by syz-executor.2/9449:
#0: ffffffff8f5e7448 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock net/core/rtnetlink.c:79 [inline]
#0: ffffffff8f5e7448 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x842/0x1180 net/core/rtnetlink.c:6632
#1: ffff888060c64cb8 (&br->lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline]
#1: ffff888060c64cb8 (&br->lock){+.-.}-{2:2}, at: br_port_slave_changelink+0x3d/0x150 net/bridge/br_netlink.c:1212
#2: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline]
#2: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:781 [inline]
#2: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: team_change_rx_flags+0x29/0x330 drivers/net/team/team_core.c:1767
the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
-> (&br->lock){+.-.}-{2:2} {
HARDIRQ-ON-W at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline]
_raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178
spin_lock_bh include/linux/spinlock.h:356 [inline]
br_add_if+0xb34/0xef0 net/bridge/br_if.c:682
do_set_master net/core/rtnetlink.c:2701 [inline]
do_setlink+0xe70/0x41f0 net/core/rtnetlink.c:2907
__rtnl_newlink net/core/rtnetlink.c:3696 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
__sys_sendto+0x3a4/0x4f0 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
IN-SOFTIRQ-W at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:351 [inline]
br_forward_delay_timer_expired+0x50/0x440 net/bridge/br_stp_timer.c:86
call_timer_fn+0x18e/0x650 kernel/time/timer.c:1792
expire_timers kernel/time/timer.c:1843 [inline]
__run_timers kernel/time/timer.c:2417 [inline]
__run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2428
run_timer_base kernel/time/timer.c:2437 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2447
handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
__do_softirq kernel/softirq.c:588 [inline]
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637
irq_exit_rcu+0x9/0x30 kernel/softirq.c:649
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
lock_acquire+0x264/0x550 kernel/locking/lockdep.c:5758
fs_reclaim_acquire+0xaf/0x140 mm/page_alloc.c:3800
might_alloc include/linux/sched/mm.h:334 [inline]
slab_pre_alloc_hook mm/slub.c:3890 [inline]
slab_alloc_node mm/slub.c:3980 [inline]
kmalloc_trace_noprof+0x3d/0x2c0 mm/slub.c:4147
kmalloc_noprof include/linux/slab.h:660 [inline]
kzalloc_noprof include/linux/slab.h:778 [inline]
class_dir_create_and_add drivers/base/core.c:3255 [inline]
get_device_parent+0x2a7/0x410 drivers/base/core.c:3315
device_add+0x325/0xbf0 drivers/base/core.c:3645
netdev_register_kobject+0x17e/0x320 net/core/net-sysfs.c:2136
register_netdevice+0x11d5/0x19e0 net/core/dev.c:10375
nsim_init_netdevsim drivers/net/netdevsim/netdev.c:690 [inline]
nsim_create+0x647/0x890 drivers/net/netdevsim/netdev.c:750
__nsim_dev_port_add+0x6c0/0xae0 drivers/net/netdevsim/dev.c:1390
nsim_dev_port_add_all drivers/net/netdevsim/dev.c:1446 [inline]
nsim_dev_reload_create drivers/net/netdevsim/dev.c:1498 [inline]
nsim_dev_reload_up+0x69b/0x8e0 drivers/net/netdevsim/dev.c:985
devlink_reload+0x478/0x870 net/devlink/dev.c:474
devlink_nl_reload_doit+0xbd6/0xe50 net/devlink/dev.c:586
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2585
___sys_sendmsg net/socket.c:2639 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2668
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
INITIAL USE at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline]
_raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178
spin_lock_bh include/linux/spinlock.h:356 [inline]
br_add_if+0xb34/0xef0 net/bridge/br_if.c:682
do_set_master net/core/rtnetlink.c:2701 [inline]
do_setlink+0xe70/0x41f0 net/core/rtnetlink.c:2907
__rtnl_newlink net/core/rtnetlink.c:3696 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
__sys_sendto+0x3a4/0x4f0 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
}
... key at: [<ffffffff94b9a1a0>] br_dev_setup.__key+0x0/0x20
the dependencies between the lock to be acquired
and SOFTIRQ-irq-unsafe lock:
-> (netdev_rename_lock.seqcount){+.+.}-{0:0} {
HARDIRQ-ON-W at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
do_write_seqcount_begin_nested include/linux/seqlock.h:469 [inline]
do_write_seqcount_begin include/linux/seqlock.h:495 [inline]
write_seqlock include/linux/seqlock.h:823 [inline]
dev_change_name+0x184/0x920 net/core/dev.c:1229
do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2880
__rtnl_newlink net/core/rtnetlink.c:3696 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
__sys_sendto+0x3a4/0x4f0 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
SOFTIRQ-ON-W at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
do_write_seqcount_begin_nested include/linux/seqlock.h:469 [inline]
do_write_seqcount_begin include/linux/seqlock.h:495 [inline]
write_seqlock include/linux/seqlock.h:823 [inline]
dev_change_name+0x184/0x920 net/core/dev.c:1229
do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2880
__rtnl_newlink net/core/rtnetlink.c:3696 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
__sys_sendto+0x3a4/0x4f0 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
INITIAL USE at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
do_write_seqcount_begin_nested include/linux/seqlock.h:469 [inline]
do_write_seqcount_begin include/linux/seqlock.h:495 [inline]
write_seqlock include/linux/seqlock.h:823 [inline]
dev_change_name+0x184/0x920 net/core/dev.c:1229
do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2880
__rtnl_newlink net/core/rtnetlink.c:3696 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
__sys_sendto+0x3a4/0x4f0 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
INITIAL READ USE at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
seqcount_lockdep_reader_access include/linux/seqlock.h:72 [inline]
read_seqbegin include/linux/seqlock.h:772 [inline]
netdev_copy_name+0x168/0x2c0 net/core/dev.c:949
rtnl_fill_ifinfo+0x38e/0x2270 net/core/rtnetlink.c:1839
rtmsg_ifinfo_build_skb+0x18a/0x260 net/core/rtnetlink.c:4073
rtmsg_ifinfo_event net/core/rtnetlink.c:4107 [inline]
rtmsg_ifinfo+0x91/0x1b0 net/core/rtnetlink.c:4116
register_netdevice+0x1665/0x19e0 net/core/dev.c:10422
register_netdev+0x3b/0x50 net/core/dev.c:10512
loopback_net_init+0x73/0x150 drivers/net/loopback.c:217
ops_init+0x359/0x610 net/core/net_namespace.c:139
__register_pernet_operations net/core/net_namespace.c:1247 [inline]
register_pernet_operations+0x2cb/0x660 net/core/net_namespace.c:1320
register_pernet_device+0x33/0x80 net/core/net_namespace.c:1407
net_dev_init+0xfcd/0x10d0 net/core/dev.c:11956
do_one_initcall+0x248/0x880 init/main.c:1267
do_initcall_level+0x157/0x210 init/main.c:1329
do_initcalls+0x3f/0x80 init/main.c:1345
kernel_init_freeable+0x435/0x5d0 init/main.c:1578
kernel_init+0x1d/0x2b0 init/main.c:1467
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
}
... key at: [<ffffffff8f5de668>] netdev_rename_lock+0x8/0xa0
... acquired at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
seqcount_lockdep_reader_access include/linux/seqlock.h:72 [inline]
read_seqbegin include/linux/seqlock.h:772 [inline]
netdev_copy_name+0x168/0x2c0 net/core/dev.c:949
rtnl_fill_ifinfo+0x38e/0x2270 net/core/rtnetlink.c:1839
rtmsg_ifinfo_build_skb+0x18a/0x260 net/core/rtnetlink.c:4073
rtmsg_ifinfo_event net/core/rtnetlink.c:4107 [inline]
rtmsg_ifinfo+0x91/0x1b0 net/core/rtnetlink.c:4116
__dev_notify_flags+0xf7/0x400 net/core/dev.c:8816
__dev_set_promiscuity+0x152/0x5a0 net/core/dev.c:8588
dev_set_promiscuity+0x51/0xe0 net/core/dev.c:8608
team_change_rx_flags+0x203/0x330 drivers/net/team/team_core.c:1771
dev_change_rx_flags net/core/dev.c:8541 [inline]
__dev_set_promiscuity+0x406/0x5a0 net/core/dev.c:8585
dev_set_promiscuity+0x51/0xe0 net/core/dev.c:8608
br_port_clear_promisc net/bridge/br_if.c:135 [inline]
br_manage_promisc+0x505/0x590 net/bridge/br_if.c:172
nbp_update_port_count net/bridge/br_if.c:242 [inline]
br_port_flags_change+0x161/0x1f0 net/bridge/br_if.c:761
br_setport+0xcb5/0x16d0 net/bridge/br_netlink.c:1000
br_port_slave_changelink+0x135/0x150 net/bridge/br_netlink.c:1213
__rtnl_newlink net/core/rtnetlink.c:3689 [inline]
rtnl_newlink+0x169f/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2585
___sys_sendmsg net/socket.c:2639 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2668
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
stack backtrace:
CPU: 0 PID: 9449 Comm: syz-executor.2 Not tainted 6.10.0-rc2-syzkaller-00249-gbe27b8965297 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
print_bad_irq_dependency kernel/locking/lockdep.c:2626 [inline]
check_irq_usage kernel/locking/lockdep.c:2865 [inline]
check_prev_add kernel/locking/lockdep.c:3138 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain+0x4de0/0x5900 kernel/locking/lockdep.c:3869
__lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
seqcount_lockdep_reader_access include/linux/seqlock.h:72 [inline]
read_seqbegin include/linux/seqlock.h:772 [inline]
netdev_copy_name+0x168/0x2c0 net/core/dev.c:949
rtnl_fill_ifinfo+0x38e/0x2270 net/core/rtnetlink.c:1839
rtmsg_ifinfo_build_skb+0x18a/0x260 net/core/rtnetlink.c:4073
rtmsg_ifinfo_event net/core/rtnetlink.c:4107 [inline]
rtmsg_ifinfo+0x91/0x1b0 net/core/rtnetlink.c:4116
__dev_notify_flags+0xf7/0x400 net/core/dev.c:8816
__dev_set_promiscuity+0x152/0x5a0 net/core/dev.c:8588
dev_set_promiscuity+0x51/0xe0 net/core/dev.c:8608
team_change_rx_flags+0x203/0x330 drivers/net/team/team_core.c:1771
dev_change_rx_flags net/core/dev.c:8541 [inline]
__dev_set_promiscuity+0x406/0x5a0 net/core/dev.c:8585
dev_set_promiscuity+0x51/0xe0 net/core/dev.c:8608
br_port_clear_promisc net/bridge/br_if.c:135 [inline]
br_manage_promisc+0x505/0x590 net/bridge/br_if.c:172
nbp_update_port_count net/bridge/br_if.c:242 [inline]
br_port_flags_change+0x161/0x1f0 net/bridge/br_if.c:761
br_setport+0xcb5/0x16d0 net/bridge/br_netlink.c:1000
br_port_slave_changelink+0x135/0x150 net/bridge/br_netlink.c:1213
__rtnl_newlink net/core/rtnetlink.c:3689 [inline]
rtnl_newlink+0x169f/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2585
___sys_sendmsg net/socket.c:2639 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2668
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f3b3047cf29
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3b311740c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f3b305b4050 RCX: 00007f3b3047cf29
RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000008
RBP: 00007f3b304ec074 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000006e R14: 00007f3b305b4050 R15: 00007ffca2f3dc68
</TASK>
Fixes: 0840556e5a3a ("net: Protect dev->name by seqlock.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Herve Codina says:
====================
Handle switch reset in mscc-miim
These two patches were previously sent as part of a bigger series:
https://lore.kernel.org/lkml/20240527161450.326615-1-herve.codina@bootlin.com/
v1 and v2 iterations were handled during the v1 and v2 reviews of this
bigger series. As theses two patches are now ready to be applied, they
were extracted from the bigger series and sent alone in this current
series.
This current v3 series takes into account feedback received during the
bigger series v2 review.
Changes v2 -> v3
- patch 1
Drop one useless sentence.
Add 'Reviewed-by: Andrew Lunn <andrew@lunn.ch>'
Add 'Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>'
- patch 2
Add 'Reviewed-by: Andrew Lunn <andrew@lunn.ch>'
Changes v1 -> v2 (as part of the bigger series iterations)
- Patch 1
Improve the reset property description
- Patch 2
Fix a wrong reverse x-mass tree declaration
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mscc-miim device can be impacted by the switch reset, at least when
this device is part of the LAN966x PCI device.
Handle this newly added (optional) resets property.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the (optional) resets property.
The mscc-miim device is impacted by the switch reset especially when the
mscc-miim device is used as part of the LAN966x PCI device.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With commit 27bd5fdc24c0 ("KVM: SEV-ES: Prevent MSR access post VMSA
encryption"), older VMMs like QEMU 9.0 and older will fail when booting
SEV-ES guests with something like the following error:
qemu-system-x86_64: error: failed to get MSR 0x174
qemu-system-x86_64: ../qemu.git/target/i386/kvm/kvm.c:3950: kvm_get_msrs: Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
This is because older VMMs that might still call
svm_get_msr()/svm_set_msr() for SEV-ES guests after guest boot even if
those interfaces were essentially just noops because of the vCPU state
being encrypted and stored separately in the VMSA. Now those VMMs will
get an -EINVAL and generally crash.
Newer VMMs that are aware of KVM_SEV_INIT2 however are already aware of
the stricter limitations of what vCPU state can be sync'd during
guest run-time, so newer QEMU for instance will work both for legacy
KVM_SEV_ES_INIT interface as well as KVM_SEV_INIT2.
So when using KVM_SEV_INIT2 it's okay to assume userspace can deal with
-EINVAL, whereas for legacy KVM_SEV_ES_INIT the kernel might be dealing
with either an older VMM and so it needs to assume that returning
-EINVAL might break the VMM.
Address this by only returning -EINVAL if the guest was started with
KVM_SEV_INIT2. Otherwise, just silently return.
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nikunj A Dadhania <nikunj@amd.com>
Reported-by: Srikanth Aithal <sraithal@amd.com>
Closes: https://lore.kernel.org/lkml/37usuu4yu4ok7be2hqexhmcyopluuiqj3k266z4gajc2rcj4yo@eujb23qc3zcm/
Fixes: 27bd5fdc24c0 ("KVM: SEV-ES: Prevent MSR access post VMSA encryption")
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240604233510.764949-1-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Merge ACPI device enumeration fixes for 6.10-rc5:
- Ignore MIPI camera graph port nodes created with the help of the
information from the ACPI tables on all Dell Tiger, Alder and Raptor
Lake models as that information is reported to be invalid on the
systems in question (Hans de Goede).
- Use new Intel CPU model matching macros in the MIPI DisCo for Imaging
part of ACPI device enumeration (Hans de Goede).
* acpi-scan:
ACPI: mipi-disco-img: Switch to new Intel CPU model defines
ACPI: scan: Ignore camera graph port nodes on all Dell Tiger, Alder and Raptor Lake models
|
|
James Chapman says:
====================
l2tp: don't use the tunnel socket's sk_user_data in datapath
This series refactors l2tp to not use the tunnel socket's sk_user_data
in the datapath. The main reasons for doing this are
* to allow for simplifying internal socket cleanup code (to be done
in a later series)
* to support multiple L2TPv3 UDP tunnels using the same 5-tuple
address
When handling received UDP frames, l2tp's current approach is to look
up a session in a per-tunnel list. l2tp uses the tunnel socket's
sk_user_data to derive the tunnel context from the receiving socket.
But this results in the socket and tunnel lifetimes being very tightly
coupled and the tunnel/socket cleanup paths being complicated. The
latter has historically been a source of l2tp bugs and makes the code
more difficult to maintain. Also, if sockets are aliased, we can't
trust that the socket's sk_user_data references the right tunnel
anyway. Hence the desire to not use sk_user_data in the datapath.
The new approach is to lookup sessions in a per-net session list
without first deriving the tunnel:
* For L2TPv2, the l2tp header has separate tunnel ID and session ID
fields which can be trivially combined to make a unique 32-bit key
for per-net session lookup.
* For L2TPv3, there is no tunnel ID in the packet header, only a
session ID, which should be unique over all tunnels so can be used
as a key for per-net session lookup. However, this only works when
the L2TPv3 session ID really is unique over all tunnels. At least
one L2TPv3 application is known to use the same session ID in
different L2TPv3 UDP tunnels, relying on UDP address/ports to
distinguish them. This worked previously because sessions in UDP
tunnels were kept in a per-tunnel list. To retain support for this,
L2TPv3 session ID collisions are managed using a separate per-net
session hlist, keyed by ID and sk. When looking up a session by ID,
if there's more than one match, sk is used to find the right one.
L2TPv3 sessions in IP-encap tunnels are already looked up by session
ID in a per-net list. This work has UDP sessions also use the per-net
session list, while allowing for session ID collisions. The existing
per-tunnel hlist becomes a plain list since it is used only in
management and cleanup paths to walk a list of sessions in a given
tunnel.
For better performance, the per-net session lists use IDR. Separate
IDRs are used for L2TPv2 and L2TPv3 sessions to avoid potential key
collisions.
These changes pass l2tp regression tests and improve data forwarding
performance by about 10% in some of my test setups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The per-tunnel session list is no longer used by the
datapath. However, we still need a list of sessions in the tunnel for
l2tp_session_get_nth, which is used by management code. (An
alternative might be to walk each session IDR list, matching only
sessions of a given tunnel.)
Replace the per-tunnel hlist with a per-tunnel list. In functions
which walk a list of sessions of a tunnel, walk this list instead.
Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All users of l2tp_tunnel_get_session are now gone so it can be
removed.
Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add generic session getter which uses IDR. Replace all users of
l2tp_tunnel_get_session which uses the per-tunnel session list to use
the generic getter.
Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If UDP sockets are aliased, sk might be the wrong socket. There's no
benefit to using sk_user_data to do some checks on the associated
tunnel context. Just report the error anyway, like udp core does.
Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Modify UDP decap to not use the tunnel pointer which comes from the
sock's sk_user_data when parsing the L2TP header. By looking up the
destination session using only the packet contents we avoid potential
UDP 5-tuple aliasing issues which arise from depending on the socket
that received the packet.
Drop the useless error messages on short packet or on failing to find
a session since the tunnel pointer might point to a different tunnel
if multiple sockets use the same 5-tuple.
Short packets (those not big enough to contain an L2TP header) are no
longer counted in the tunnel's invalid counter because we can't derive
the tunnel until we parse the l2tp header to lookup the session.
l2tp_udp_encap_recv was a small wrapper around l2tp_udp_recv_core which
used sk_user_data to derive a tunnel pointer in an RCU-safe way. But
we no longer need the tunnel pointer, so remove that code and combine
the two functions.
Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
L2TPv2 sessions are currently kept in a per-tunnel hashlist, keyed by
16-bit session_id. When handling received L2TPv2 packets, we need to
first derive the tunnel using the 16-bit tunnel_id or sock, then
lookup the session in a per-tunnel hlist using the 16-bit session_id.
We want to avoid using sk_user_data in the datapath and double lookups
on every packet. So instead, use a per-net IDR to hold L2TPv2
sessions, keyed by a 32-bit value derived from the 16-bit tunnel_id
and session_id. This will allow the L2TPv2 UDP receive datapath to
lookup a session with a single lookup without deriving the tunnel
first.
L2TPv2 sessions are held in their own IDR to avoid potential
key collisions with L2TPv3 sessions.
Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
L2TPv3 sessions are currently held in one of two fixed-size hash
lists: either a per-net hashlist (IP-encap), or a per-tunnel hashlist
(UDP-encap), keyed by the L2TPv3 32-bit session_id.
In order to lookup L2TPv3 sessions in UDP-encap tunnels efficiently
without finding the tunnel first via sk_user_data, UDP sessions are
now kept in a per-net session list, keyed by session ID. Convert the
existing per-net hashlist to use an IDR for better performance when
there are many sessions and have L2TPv3 UDP sessions use the same IDR.
Although the L2TPv3 RFC states that the session ID alone identifies
the session, our implementation has allowed the same session ID to be
used in different L2TP UDP tunnels. To retain support for this, a new
per-net session hashtable is used, keyed by the sock and session
ID. If on creating a new session, a session already exists with that
ID in the IDR, the colliding sessions are added to the new hashtable
and the existing IDR entry is flagged. When looking up sessions, the
approach is to first check the IDR and if no unflagged match is found,
check the new hashtable. The sock is made available to session getters
where session ID collisions are to be considered. In this way, the new
hashtable is used only for session ID collisions so can be kept small.
For managing session removal, we need a list of colliding sessions
matching a given ID in order to update or remove the IDR entry of the
ID. This is necessary to detect session ID collisions when future
sessions are created. The list head is allocated on first collision
of a given ID and refcounted.
Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove an unused variable in struct l2tp_tunnel which was left behind
by commit c4d48a58f32c5 ("l2tp: convert l2tp_tunnel_list to idr").
Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the ionic_run_xdp() doesn't handle multi-buffer packets
properly for XDP_TX and XDP_REDIRECT.
When a jumbo frame is received, the ionic_run_xdp() first makes xdp
frame with all necessary pages in the rx descriptor.
And if the action is either XDP_TX or XDP_REDIRECT, it should unmap
dma-mapping and reset page pointer to NULL for all pages, not only the
first page.
But it doesn't for SG pages. So, SG pages unexpectedly will be reused.
It eventually causes kernel panic.
Oops: general protection fault, probably for non-canonical address 0x504f4e4dbebc64ff: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.10.0-rc3+ #25
RIP: 0010:xdp_return_frame+0x42/0x90
Code: 01 75 12 5b 4c 89 e6 5d 31 c9 41 5c 31 d2 41 5d e9 73 fd ff ff 44 8b 6b 20 0f b7 43 0a 49 81 ed 68 01 00 00 49 29 c5 49 01 fd <41> 80 7d0
RSP: 0018:ffff99d00122ce08 EFLAGS: 00010202
RAX: 0000000000005453 RBX: ffff8d325f904000 RCX: 0000000000000001
RDX: 00000000670e1000 RSI: 000000011f90d000 RDI: 504f4e4d4c4b4a49
RBP: ffff99d003907740 R08: 0000000000000000 R09: 0000000000000000
R10: 000000011f90d000 R11: 0000000000000000 R12: ffff8d325f904010
R13: 504f4e4dbebc64fd R14: ffff8d3242b070c8 R15: ffff99d0039077c0
FS: 0000000000000000(0000) GS:ffff8d399f780000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f41f6c85e38 CR3: 000000037ac30000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<IRQ>
? die_addr+0x33/0x90
? exc_general_protection+0x251/0x2f0
? asm_exc_general_protection+0x22/0x30
? xdp_return_frame+0x42/0x90
ionic_tx_clean+0x211/0x280 [ionic 15881354510e6a9c655c59c54812b319ed2cd015]
ionic_tx_cq_service+0xd3/0x210 [ionic 15881354510e6a9c655c59c54812b319ed2cd015]
ionic_txrx_napi+0x41/0x1b0 [ionic 15881354510e6a9c655c59c54812b319ed2cd015]
__napi_poll.constprop.0+0x29/0x1b0
net_rx_action+0x2c4/0x350
handle_softirqs+0xf4/0x320
irq_exit_rcu+0x78/0xa0
common_interrupt+0x77/0x90
Fixes: 5377805dc1c0 ("ionic: implement xdp frags support")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Selecting FW_UPLOAD is not sufficient as it allows the firmware loader
API to be built as a module alongside the pd692x0 driver built as builtin.
Add select FW_LOADER to fix this issue.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406200632.hSChnX0g-lkp@intel.com/
Fixes: 9a9938451890 ("net: pse-pd: Add PD692x0 PSE controller driver")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The existing method of reserving unicast filter count leads to wasted
MCAM entries if the functionality is not used or fewer entries are used.
Furthermore, the amount of MCAM entries differs amongst Octeon SoCs.
We implemented a means to adjust the UC filter count via devlink,
allowing for better use of MCAM entries across Netdev apps.
commands:
To get the current unicast filter count
# devlink dev param show pci/0002:02:00.0 name unicast_filter_count
To change/set the unicast filter count
# devlink dev param set pci/0002:02:00.0 name unicast_filter_count
value 5 cmode runtime
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The __ethtool_get_ts_info function returns directly if the device has a
get_ts_info() method. For bonding with an active slave, this works correctly
as we simply return the real device's timestamping information. However,
when there is no active slave, we only check the slave's TX software
timestamp information. We still need to set the phc index and RX timestamp
information manually. Otherwise, the result will be look like:
Time stamping parameters for bond0:
Capabilities:
software-transmit
PTP Hardware Clock: 0
Hardware Transmit Timestamp Modes: none
Hardware Receive Filter Modes: none
This issue does not affect VLAN or MACVLAN devices, as they only have one
downlink and can directly use the downlink's timestamping information.
Fixes: b8768dc40777 ("net: ethtool: Refactor identical get_ts_info implementations.")
Reported-by: Liang Li <liali@redhat.com>
Closes: https://issues.redhat.com/browse/RHEL-42409
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fill this in so user-space can identify multiple ports on the same CP
unit.
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The recent fix introduced a reverse selection of
CONFIG_SERIAL_MULTI_INSTANTIATE, but its condition isn't always met.
Use a weak reverse selection to suggest the config for avoiding such
inconsistencies, instead.
Fixes: 9b1effff19cd ("ALSA: hda: cs35l56: Select SERIAL_MULTI_INSTANTIATE")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406210732.ozgk8IMK-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202406211244.oLhoF3My-lkp@intel.com/
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240621073915.19576-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
New drivers were prevented from adding ndo_set_vf_* callbacks
over the last few years. This was expected to result in broader
switchdev adoption, but seems to have had little effect.
Based on recent netdev meeting there is broad support for allowing
adding those ops.
There is a problem with the current API supporting a limited number
of VFs (100+, which is less than some modern HW supports).
We can try to solve it by adding similar functionality on devlink
ports, but that'd be another API variation to maintain.
So a netlink attribute reshuffling is a more likely outcome.
Document the guidance, make it clear that the API is frozen.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ilya found a failure in running check-kernel tests with at_groups=144
(144: conntrack - FTP SNAT orig tuple) in OVS repo. After his further
investigation, the root cause is that the labels sent to userspace
for related ct are incorrect.
The labels for unconfirmed related ct should use its master's labels.
However, the changes made in commit 8c8b73320805 ("openvswitch: set
IPS_CONFIRMED in tmpl status only when commit is set in conntrack")
led to getting labels from this related ct.
So fix it in ovs_ct_get_labels() by changing to copy labels from its
master ct if it is a unconfirmed related ct. Note that there is no
fix needed for ct->mark, as it was already copied from its master
ct for related ct in init_conntrack().
Fixes: 8c8b73320805 ("openvswitch: set IPS_CONFIRMED in tmpl status only when commit is set in conntrack")
Reported-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Tested-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The KSZ9477 allows HSR in-HW offloading for any of two selected ports.
This patch adds check if one tries to use more than two ports with
HSR offloading enabled.
The problem is with RedBox configuration (HSR-SAN) - when configuring:
ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 interlink lan3 \
supervision 45 version 1
The lan1 (port0) and lan2 (port1) are correctly configured as ports, which
can use HSR offloading on ksz9477.
However, when we do already have two bits set in hsr_ports, we need to
return (-ENOTSUPP), so the interlink port (lan3) would be used with
SW based HSR RedBox support.
Otherwise, I do see some strange network behavior, as some HSR frames are
visible on non-HSR network and vice versa.
This causes the switch connected to interlink port (lan3) to drop frames
and no communication is possible.
Moreover, conceptually - the interlink (i.e. HSR-SAN port - lan3/port2)
shall be only supported in software as it is also possible to use ksz9477
with only SW based HSR (i.e. port0/1 -> hsr0 with offloading, port2 ->
HSR-SAN/interlink, port4/5 -> hsr1 with SW based HSR).
Fixes: 5055cccfc2d1 ("net: hsr: Provide RedBox support (HSR-SAN)")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
FEC_ECR_EN1588 bit gets cleared after MAC reset in `fec_stop()`, which
makes all 1588 functionality shut down, and all the extended registers
disappear, on link-down, making the adapter fall back to compatibility
"dumb mode". However, some functionality needs to be retained (e.g. PPS)
even without link.
Fixes: 6605b730c061 ("FEC: Add time stamping code and a PTP hardware clock")
Cc: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/netdev/5fa9fadc-a89d-467a-aae9-c65469ff5fe1@lunn.ch/
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
David Wei says:
====================
bnxt_en: implement netdev_queue_mgmt_ops
Implement netdev_queue_mgmt_ops for bnxt added in [1]. This will be used
in the io_uring ZC Rx patchset to configure queues with a custom page
pool w/ a special memory provider for zero copy support.
The first two patches prep the driver, while the final patch adds the
implementation.
Any arbitrary Rx queue can be reset without affecting other queues. V2
and prior of this patchset was thought to only support resetting queues
not in the main RSS context. Upon further testing I realised moving
queues out and calling bnxt_hwrm_vnic_update() wasn't necessary.
I didn't include the netdev core API using this netdev_queue_mgmt_ops
because Mina is adding it in his devmem TCP series [2]. But I'm happy to
include it if folks want to include a user with this series.
I tested this series on BCM957504-N1100FY4 with FW 229.1.123.0. I
manually injected failures at all the places that can return an errno
and confirmed that the device/queue is never left in a broken state.
[1]: https://lore.kernel.org/netdev/20240501232549.1327174-2-shailend@google.com/
[2]: https://lore.kernel.org/netdev/20240607005127.3078656-2-almasrymina@google.com/
v3:
- tested w/o bnxt_hwrm_vnic_update() and it works on any queue
- removed unneeded code
v2:
- fix broken build
- remove unused var in bnxt_init_one_rx_ring()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement netdev_queue_mgmt_ops for bnxt added in [1].
Two bnxt_rx_ring_info structs are allocated to hold the new/old queue
memory. Queue memory is copied from/to the main bp->rx_ring[idx]
bnxt_rx_ring_info.
Queue memory is pre-allocated in bnxt_queue_mem_alloc() into a clone,
and then copied into bp->rx_ring[idx] in bnxt_queue_mem_start().
Similarly, when bp->rx_ring[idx] is stopped its queue memory is copied
into a clone, and then freed later in bnxt_queue_mem_free().
I tested this patchset with netdev_rx_queue_restart(), including
inducing errors in all places that returns an error code. In all cases,
the queue is left in a good working state.
Rx queues are created/destroyed using bnxt_hwrm_rx_ring_alloc() and
bnxt_hwrm_rx_ring_free(), which issue HWRM_RING_ALLOC and HWRM_RING_FREE
commands respectively to the firmware. By the time a HWRM_RING_FREE
response is received, there won't be any more completions from that
queue.
Thanks to Somnath for helping me with this patch. With their permission
I've added them as Acked-by.
[1]: https://lore.kernel.org/netdev/20240501232549.1327174-2-shailend@google.com/
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To prepare for queue API implementation, split rx ring functions out
from ring helpers. These new helpers will be called from queue API
implementation.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Johan Jonker says:
====================
cleanup arc emac
The Rockchip emac binding for rk3036/rk3066/rk3188 has been converted to YAML
with the ethernet-phy node in a mdio node. This requires some driver fixes
by someone that can do hardware testing.
In order to make a future fix easier make the driver 'Rockchip only'
by removing the obsolete part of the arc emac driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The last real user nSIM_700 of the "snps,arc-emac" compatible string in
a driver was removed in 2019. The use of this string in the combined DT of
rk3066a/rk3188 as place holder has also been replaced, so
remove arc_emac.txt
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The last real user nSIM_700 of the "snps,arc-emac" compatible string in
a driver was removed in 2019. The use of this string in the combined DT of
rk3066a/rk3188 as place holder has also been replaced, so
remove emac_arc.c to clean up some code.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the combined DT of rk3066a/rk3188 the emac node uses as place holder
the compatible string "snps,arc-emac". The last real user nSIM_700
of the "snps,arc-emac" compatible string in a driver was removed in 2019.
Rockchip emac nodes don't make use of this common fall back string.
In order to removed unused driver code replace this string with
"rockchip,rk3066-emac".
As we are there remove the blank lines and sort.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the mcp251xfd_start_xmit() function fails, the driver stops
processing messages, and the interrupt routine does not return,
running indefinitely even after killing the running application.
Error messages:
[ 441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16
[ 441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0, tx_head=0x000017d3).
... and repeat forever.
The issue can be triggered when multiple devices share the same SPI
interface. And there is concurrent access to the bus.
The problem occurs because tx_ring->head increments even if
mcp251xfd_start_xmit() fails. Consequently, the driver skips one TX
package while still expecting a response in
mcp251xfd_handle_tefif_one().
Resolve the issue by starting a workqueue to write the tx obj
synchronously if err = -EBUSY. In case of another error, decrement
tx_ring->head, remove skb from the echo stack, and drop the message.
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Cc: stable@vger.kernel.org
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Link: https://lore.kernel.org/all/20240517134355.770777-1-ivitro@gmail.com
[mkl: use more imperative wording in patch description]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
As the potential failure of usb_submit_urb(), it should be better to
return the err variable to catch the error.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/all/20240521041020.1519416-1-nichen@iscas.ac.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Addresses an issue where a CAN bus error during a BAM transmission
could stall the socket queue, preventing further transmissions even
after the bus error is resolved. The fix activates the next queued
session after the error recovery, allowing communication to continue.
Fixes: 9d71dd0c70099 ("can: add support of SAE J1939 protocol")
Cc: stable@vger.kernel.org
Reported-by: Alexander Hölzl <alexander.hoelzl@gmx.net>
Tested-by: Alexander Hölzl <alexander.hoelzl@gmx.net>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20240528070648.1947203-1-o.rempel@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
syzbot reported kernel-infoleak in raw_recvmsg() [1]. j1939_send_one()
creates full frame including unused data, but it doesn't initialize
it. This causes the kernel-infoleak issue. Fix this by initializing
unused data.
[1]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline]
BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline]
BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185
instrument_copy_to_user include/linux/instrumented.h:114 [inline]
copy_to_user_iter lib/iov_iter.c:24 [inline]
iterate_ubuf include/linux/iov_iter.h:29 [inline]
iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
iterate_and_advance include/linux/iov_iter.h:271 [inline]
_copy_to_iter+0x366/0x2520 lib/iov_iter.c:185
copy_to_iter include/linux/uio.h:196 [inline]
memcpy_to_msg include/linux/skbuff.h:4113 [inline]
raw_recvmsg+0x2b8/0x9e0 net/can/raw.c:1008
sock_recvmsg_nosec net/socket.c:1046 [inline]
sock_recvmsg+0x2c4/0x340 net/socket.c:1068
____sys_recvmsg+0x18a/0x620 net/socket.c:2803
___sys_recvmsg+0x223/0x840 net/socket.c:2845
do_recvmmsg+0x4fc/0xfd0 net/socket.c:2939
__sys_recvmmsg net/socket.c:3018 [inline]
__do_sys_recvmmsg net/socket.c:3041 [inline]
__se_sys_recvmmsg net/socket.c:3034 [inline]
__x64_sys_recvmmsg+0x397/0x490 net/socket.c:3034
x64_sys_call+0xf6c/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:300
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3845 [inline]
kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577
__alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668
alloc_skb include/linux/skbuff.h:1313 [inline]
alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504
sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795
sock_alloc_send_skb include/net/sock.h:1842 [inline]
j1939_sk_alloc_skb net/can/j1939/socket.c:878 [inline]
j1939_sk_send_loop net/can/j1939/socket.c:1142 [inline]
j1939_sk_sendmsg+0xc0a/0x2730 net/can/j1939/socket.c:1277
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
____sys_sendmsg+0x877/0xb60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674
x64_sys_call+0xc4b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Bytes 12-15 of 16 are uninitialized
Memory access of size 16 starts at ffff888120969690
Data copied to user address 00000000200017c0
CPU: 1 PID: 5050 Comm: syz-executor198 Not tainted 6.9.0-rc5-syzkaller-00031-g71b1543c83d6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Reported-and-tested-by: syzbot+5681e40d297b30f5b513@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5681e40d297b30f5b513
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/all/20240517035953.2617090-1-syoshida@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
in xtp_rx_rts_session_new
This patch enhances error handling in scenarios with RTS (Request to
Send) messages arriving closely. It replaces the less informative WARN_ON_ONCE
backtraces with a new error handling method. This provides clearer error
messages and allows for the early termination of problematic sessions.
Previously, sessions were only released at the end of j1939_xtp_rx_rts().
Potentially this could be reproduced with something like:
testj1939 -r vcan0:0x80 &
while true; do
# send first RTS
cansend vcan0 18EC8090#1014000303002301;
# send second RTS
cansend vcan0 18EC8090#1014000303002301;
# send abort
cansend vcan0 18EC8090#ff00000000002301;
done
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Reported-by: syzbot+daa36413a5cedf799ae4@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20231117124959.961171-1-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This is almost compatible, but passing a negative offset should result
in a EINVAL error, but on mips o32 compat mode would seek to a large
32-bit byte offset.
Use compat_sys_lseek() to correctly sign-extend the argument.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Target register of mftc0 should be __res instead of $1, this is
a leftover from old .insn code.
Fixes: dd6d29a61489 ("MIPS: Implement microMIPS MT ASE helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The m_can driver sets and clears the CCCR.INIT bit during probe (both
when testing the NON-ISO bit, and when configuring the chip). After
clearing the CCCR.INIT bit, the transceiver enters normal mode, where it
affects the CAN bus (i.e. it ACKs frames). This can cause troubles when
the m_can node is only used for monitoring the bus, as one cannot setup
listen-only mode before the device is probed.
Rework the probe flow, so that the CCCR.INIT bit is only cleared when
upping the device. First, the tcan4x5x driver is changed to stay in
standby mode during/after probe. This in turn requires changes when
setting bits in the CCCR register, as its CSR and CSA bits are always
high in standby mode.
Signed-off-by: Martin Hundebøll <martin@geanix.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Tested-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240607105210.155435-1-martin@geanix.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Simplify SPI driver by making use of spi_get_device_match_data().
Link: https://lore.kernel.org/all/20240606142424.129709-1-krzysztof.kozlowski@linaro.org
[mkl: add intermediate cast to uintptr_t]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use spi_get_device_match_data() helper to simplify a bit the driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/all/20240606142424.129709-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use spi_get_device_match_data() helper to simplify a bit the driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/all/20240606142424.129709-2-krzysztof.kozlowski@linaro.org
[mkl: add intermediate cast to uintptr_t]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use spi_get_device_match_data() helper to simplify a bit the driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/all/20240606142424.129709-1-krzysztof.kozlowski@linaro.org
[mkl: add intermediate cast to uintptr_t]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Martin Jocic <martin.jocic@kvaser.com> says:
This patch series adds support for MSI interrupts. It depends on the
patch series can: kvaser_pciefd: Minor improvements and cleanups.
Link: https://lore.kernel.org/all/20240620181320.235465-1-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use MSI interrupts with fallback to INTx interrupts.
Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240620181320.235465-3-martin.jocic@kvaser.com
[mkl: kvaser_pciefd_probe(): call pci_free_irq_vectors() unconditionally]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
A new interrupt is triggered by resetting the DMA RX buffers.
Since MSI interrupts are faster than legacy interrupts, the reset
of the DMA buffers must be moved to the very end of the ISR,
otherwise a new MSI interrupt will be masked by the current one.
Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240620181320.235465-2-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Martin Jocic <martin.jocic@kvaser.com> says:
Minor improvements and cleanups for the kvaser_pciefd driver
in preparation for an upcoming MSI interrupts patch series.
Link: https://lore.kernel.org/all/20240614151524.2718287-1-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Replace the variable name err used for return codes with the more
generic name ret. An upcoming patch series for adding MSI interrupts
will introduce code which also returns values other than return codes.
Renaming the variable to ret enables using it for both purposes.
This is applied to the whole file to make it consistent.
Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240614151524.2718287-8-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
