| Age | Commit message (Collapse) | Author |
|---|
|
Some code includes the __used macro to prevent functions and data from
being optimized out. This macro implements __attribute__((__used__)),
which operates at the compiler and IR-level, and so still allows a linker
to remove objects intended to be kept.
Compilers supporting __attribute__((__retain__)) can address this gap by
setting the flag SHF_GNU_RETAIN on the section of a function/variable,
indicating to the linker the object should be retained. This attribute is
available since gcc 11, clang 13, and binutils 2.36.
Provide a __retain macro implementing __attribute__((__retain__)), whose
first user will be the '__bpf_kfunc' tag.
[ Additional remark from discussion:
Why is CONFIG_LTO_CLANG added here? The __used macro permits garbage
collection at section level, so CLANG_LTO_CLANG without
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION should not change final section
dynamics?
The conditional guard was included to ensure consistent behaviour
between __retain and other features forcing split sections. In
particular, the same guard is used in vmlinux.lds.h to merge split
sections where needed. For example, using __retain in LLVM builds
without CONFIG_LTO was failing CI tests on kernel-patches/bpf because
the kernel didn't boot properly. And in further testing, the kernel
had no issues loading BPF kfunc modules with such split sections, so
the module (partial) linking scripts were left alone. ]
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/ZlmGoT9KiYLZd91S@krava/T/
Link: https://lore.kernel.org/bpf/b31bca5a5e6765a0f32cc8c19b1d9cdbfaa822b5.1717477560.git.Tony.Ambardar@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fix from Joerg Roedel:
"A single patch that fixes a regression which several people reported:
- AMD-Vi: Fix regression causing panics"
* tag 'iommu-fix-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix panic accessing amd_iommu_enable_faulting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Restore the behavior of the no_turbo sysfs attribute in the
intel_pstate driver which allowed users to make the driver start using
turbo P-states if they have been enabled on the fly by the firmware
after OS initialization (Rafael Wysocki)"
* tag 'pm-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Check turbo_is_disabled() in store_no_turbo()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI EC driver and make system
suspend work on multiple platforms where StorageD3Enable _DSD is
missing in the ACPI tables.
Specifics:
- Make the ACPI EC driver directly evaluate an "orphan" _REG method
under the EC device, if present, which stopped being evaluated
after the driver had started to install its EC address space
handler at the root of the ACPI namespace (Rafael Wysocki)
- Make more devices put NVMe storage devices into D3 at suspend to
work around missing StorageD3Enable _DSD in the BIOS (Mario
Limonciello)"
* tag 'acpi-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Evaluate orphan _REG under EC device
ACPI: x86: Force StorageD3Enable on more products
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix three issues introduced recently, two related to defects in
ACPI tables supplied by the platform firmware and one cause by a
thermal core change that went too far:
- Prevent the thermal core from failing the registration of a cooling
device if its .get_cur_state() reports an incorrect state to start
with which may happen for fans handled through firmware-supplied
AML in ACPI tables (Rafael Wysocki)
- Make the ACPI thermal zone driver initialize all trip points with
temperature of 0 centigrade and below as invalid because such trip
point temperatures do not make sense on systems with ACPI thermal
control and they cause performance regressions due to permanent
thermal mitigations to occur (Rafael Wysocki)
- Restore passive polling management in the Step-Wise thermal
governor that uses it to ensure that all cooling devices used for
thermal mitigation will go back to their initial states eventually
(Rafael Wysocki)"
* tag 'thermal-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: gov_step_wise: Restore passive polling management
thermal: ACPI: Invalidate trip points with temperature of 0 or below
thermal: core: Do not fail cdev registration because of invalid initial state
|
|
It is reported that commit 5a5efdaffda5 ("thermal: core: Resume thermal
zones asynchronously") causes battery data in sysfs on Thinkpad P1 Gen2
to become invalid after a resume from S3 (and it is necessary to reboot
the machine to restore correct battery data). Some investigation into
the problem indicated that it happened because, after the commit in
question, the ACPI battery PM notifier ran in parallel with
thermal_zone_device_resume() for one of the thermal zones which
apparently confused the platform firmware on the affected system.
While the exact reason for the firmware confusion remains unclear, it
is arguably not particularly relevant, and the expected behavior of the
affected system can be restored by making the thermal PM notifier run
at the lowest priority which avoids interference between work items
spawned by it and the other PM notifiers (that will run before those
work items now).
Fixes: 5a5efdaffda5 ("thermal: core: Resume thermal zones asynchronously")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218881
Reported-by: fhortner@yahoo.de
Tested-by: fhortner@yahoo.de
Cc: 6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After commit 5a5efdaffda5 ("thermal: core: Resume thermal zones
asynchronously") it is theoretically possible that, if a system suspend
starts immediately after a system resume, thermal_zone_device_resume()
spawned by the thermal PM notifier for one of the thermal zones at the
end of the system resume will run after the PM thermal notifier for the
suspend-prepare action. If that happens, tz->suspended set by the latter
will be reset by the former which may lead to unexpected consequences.
To avoid that race, synchronize thermal_zone_device_resume() with the
suspend-prepare thermal PM notifier with the help of additional bool
field and completion in struct thermal_zone_device.
Note that this also ensures running __thermal_zone_device_update() at
least once for each thermal zone between system resume and the following
system suspend in case it is needed to start thermal mitigation.
Fixes: 5a5efdaffda5 ("thermal: core: Resume thermal zones asynchronously")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
syzkaller builds (CONFIG_DEBUG_NET=y) frequently trigger a debug
hint in pskb_may_pull.
We'd like to retain this debug check because it might hint at integer
overflows and other issues (kernel code should pull headers, not huge
value).
In bpf case, this splat isn't interesting at all: such (nonsensical)
bpf programs are typically generated by a fuzzer anyway.
Do what Eric suggested and suppress such warning.
For CONFIG_DEBUG_NET=n we don't need the extra check because
pskb_may_pull will do the right thing: return an error without the
WARN() backtrace.
Fixes: 219eee9c0d16 ("net: skbuff: add overflow debug check to pull/push helpers")
Reported-by: syzbot+0c4150bff9fff3bf023c@syzkaller.appspotmail.com
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://syzkaller.appspot.com/bug?extid=0c4150bff9fff3bf023c
Link: https://lore.kernel.org/netdev/9f254c96-54f2-4457-b7ab-1d9f6187939c@gmail.com/
Link: https://lore.kernel.org/bpf/20240614101801.9496-1-fw@strlen.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Various fixes:
* cfg80211: wext scan
* mac80211: monitor regression, scan counted_by, offload
* iwlwifi: locking, 6 GHz scan, remain-on-channel
* tag 'wireless-2024-06-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: fix monitor channel with chanctx emulation
wifi: mac80211: Avoid address calculations via out of bounds array indexing
wifi: mac80211: Recalc offload when monitor stop
wifi: iwlwifi: scan: correctly check if PSC listen period is needed
wifi: iwlwifi: mvm: fix ROC version check
wifi: iwlwifi: mvm: unlock mvm mutex
wifi: cfg80211: wext: add extra SIOCSIWSCAN data check
wifi: cfg80211: wext: set ssids=NULL for passive scans
====================
Link: https://lore.kernel.org/r/20240614085710.24103-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is an issue around with error handling and graph management with
the exising code, none of the error paths close the graph, which result in
leaving the loaded graph in dsp, however the driver thinks otherwise.
This can have a nasty side effect specially when we try to load the same
graph to dsp, dsp returns error which leaves the board with no sound and
requires restart.
Fix this by properly closing the graph when we hit errors between
open and close.
Fixes: 30ad723b93ad ("ASoC: qdsp6: audioreach: add q6apm lpass dai support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # X13s
Link: https://lore.kernel.org/r/20240613-q6apm-fixes-v1-1-d88953675ab3@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the ASP1 DAI is hooked up by the machine driver the ASP TX mixer
sources should be initialized to disconnected. There aren't currently
any available products using the ASP so this doesn't affect any
existing systems.
The cs35l56 does not have any fixed default for the mixer source
registers. When the cs35l56 boots, its firmware patches these registers
to setup a system-specific routing; this is so that Windows can use
generic SDCA drivers instead of needing knowledge of chip-specific
registers. The setup varies between end-products, which each have
customized firmware, and so the default register state varies between
end-products. It can also change if the firmware on an end-product is
upgraded - for example if a change was needed to the routing for Windows
use-cases. It must be emphasized that the settings applied by the
firmware are not internal magic tuning; they are statically implementing
use-case setup that on Linux would be done via ALSA controls.
The driver is currently syncing the mixer controls with whatever
initial state the firmware wrote to the registers, so that they report
the actual audio routing. But if the ASP DAI is hooked up this can create
a powered-up DAPM graph without anything intentionally setting up a path.
This can lead to parts of the audio system powering up unexpectedly.
For example when cs35l56 is connected to cs42l43 using a codec-codec link,
this can create a complete DAPM graph which then powers-up cs42l43. But
the cs42l43 can only be clocked from its SoundWire bus so this causes a
bunch of errors in the kernel log where cs42l43 is unexpectedly powered-up
without a clock.
If the host is taking ownership of the ASP (either directly or as a
codec-to-codec link) there is no need to keep the mixer settings that the
firmware wrote. The driver has ALSA controls for setting these using
standard Linux mechanisms. So if the machine driver hooks up the ASP the
ASP mixers are initialized to "None" (no input). This prevents unintended
DAPM-graph power-ups, and means the initial state of the mixers is
always going to be None.
Since the initial state of the mixers can vary from system to system and
potentially between firmware upgrades, no use-case manager can currently
assume that cs35l56 has a known initial state. The firmware could just as
easily default them to "None" as to any input source. So defaulting them
to "None" in the driver is not increasing the entropy of the system.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240613132527.46537-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The interface associated with the hda_component should be deactivated
before the driver is deconstructed during removal.
Fixes: 4e7914eb1dae ("ALSA: hda/tas2781: remove sound controls in unbind")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240613133713.75550-4-simont@opensource.cirrus.com
|
|
The interface associated with the hda_component should be deactivated
before the driver is deconstructed during removal.
Fixes: 7b2f3eb492da ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240613133713.75550-3-simont@opensource.cirrus.com
|
|
The interface associated with the hda_component should be deactivated
before the driver is deconstructed during removal.
Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240613133713.75550-2-simont@opensource.cirrus.com
|
|
Merge a fix for a suspend issue related to storage handling on multiple
systems based on AMD hardware:
- Make more devices put NVMe storage devices into D3 at suspend to work
around missing StorageD3Enable _DSD in the BIOS (Mario Limonciello).
* branch acpi-x86:
ACPI: x86: Force StorageD3Enable on more products
|
|
If fallcate is implemented but zero and discard operations are not
supported by the filesystem the backing file is on we continue to fill
dmesg with errors from the blk_mq_end_request() since each time we call
fallocate() on the loop device the EOPNOTSUPP error from lo_fallocate()
ends up propagated into the block layer. In the end syscall succeeds
since the blkdev_issue_zeroout() falls back to writing zeroes which
makes the errors even more misleading and confusing.
How to reproduce:
1. make sure /tmp is mounted as tmpfs
2. dd if=/dev/zero of=/tmp/disk.img bs=1M count=100
3. losetup /dev/loop0 /tmp/disk.img
4. mkfs.ext2 /dev/loop0
5. dmesg |tail
[710690.898214] operation not supported error, dev loop0, sector 204672 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.898279] operation not supported error, dev loop0, sector 522 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.898603] operation not supported error, dev loop0, sector 16906 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.898917] operation not supported error, dev loop0, sector 32774 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.899218] operation not supported error, dev loop0, sector 49674 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.899484] operation not supported error, dev loop0, sector 65542 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.899743] operation not supported error, dev loop0, sector 82442 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.900015] operation not supported error, dev loop0, sector 98310 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.900276] operation not supported error, dev loop0, sector 115210 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.900546] operation not supported error, dev loop0, sector 131078 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
This patch changes the lo_fallocate() to clear the flags for zero and
discard operations if we get EOPNOTSUPP from the backing file fallocate
callback, that way we at least stop spewing errors after the first
unsuccessful try.
CC: Jan Kara <jack@suse.cz>
Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240613163817.22640-1-chrubis@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The SCSI Removable Media Bit (RMB) should only be set for removable media,
where the device stays and the media changes, e.g. CD-ROM or floppy.
The ATA removable media device bit is obsoleted since ATA-8 ACS (2006),
but before that it was used to indicate that the device can have its media
removed (while the device stays).
Commit 8a3e33cf92c7 ("ata: ahci: find eSATA ports and flag them as
removable") introduced a change to set the RMB bit if the port has either
the eSATA bit or the hot-plug capable bit set. The reasoning was that the
author wanted his eSATA ports to get treated like a USB stick.
This is however wrong. See "20-082r23SPC-6: Removable Medium Bit
Expectations" which has since been integrated to SPC, which states that:
"""
Reports have been received that some USB Memory Stick device servers set
the removable medium (RMB) bit to one. The rub comes when the medium is
actually removed, because... The device server is removed concurrently
with the medium removal. If there is no device server, then there is no
device server that is waiting to have removable medium inserted.
Sufficient numbers of SCSI analysts see such a device:
- not as a device that supports removable medium;
but
- as a removable, hot pluggable device.
"""
The definition of the RMB bit in the SPC specification has since been
clarified to match this.
Thus, a USB stick should not have the RMB bit set (and neither shall an
eSATA nor a hot-plug capable port).
Commit dc8b4afc4a04 ("ata: ahci: don't mark HotPlugCapable Ports as
external/removable") then changed so that the RMB bit is only set for the
eSATA bit (and not for the hot-plug capable bit), because of a lot of bug
reports of SATA devices were being automounted by udisks. However,
treating eSATA and hot-plug capable ports differently is not correct.
From the AHCI 1.3.1 spec:
Hot Plug Capable Port (HPCP): When set to '1', indicates that this port's
signal and power connectors are externally accessible via a joint signal
and power connector for blindmate device hot plug.
So a hot-plug capable port is an external port, just like commit
45b96d65ec68 ("ata: ahci: a hotplug capable port is an external port")
claims.
In order to not violate the SPC specification, modify the SCSI INQUIRY
data to only set the RMB bit if the ATA device can have its media removed.
This fixes a reported problem where GNOME/udisks was automounting devices
connected to hot-plug capable ports.
Fixes: 45b96d65ec68 ("ata: ahci: a hotplug capable port is an external port")
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Thomas Weißschuh <linux@weissschuh.net>
Reported-by: Thomas Weißschuh <linux@weissschuh.net>
Closes: https://lore.kernel.org/linux-ide/c0de8262-dc4b-4c22-9fac-33432e5bddd3@t-8ch.de/
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
[cassel: wrote commit message]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Ignore the ENODEV failures returned by kernel_sendmsg(). These errors
indicate that either the local port has been closed or the remote has
gone down. Neither of these scenarios are fatal and will eventually be
handled through packets that are later queued on the control port.
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Sarannya Sasikumar <quic_sarannya@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240612063156.1377210-1-quic_sarannya@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Christophe Roullier says:
====================
Series to deliver Ethernet for STM32MP13
STM32MP13 is STM32 SOC with 2 GMACs instances
GMAC IP version is SNPS 4.20.
GMAC IP configure with 1 RX and 1 TX queue.
DMA HW capability register supported
RX Checksum Offload Engine supported
TX Checksum insertion supported
Wake-Up On Lan supported
TSO supported
Rework dwmac glue to simplify management for next stm32 (integrate RFC from Marek)
V2: - Remark from Rob Herring (add Krzysztof's ack in patch 02/11, update in yaml)
Remark from Serge Semin (upate commits msg)
V3: - Remove PHY regulator patch and Ethernet2 DT because need to clarify how to
manage PHY regulator (in glue or PHY side)
- Integrate RFC from Marek
- Remark from Rob Herring in YAML documentation
V4: - Remark from Marek (remove max-speed, extra space in DT, update commit msg)
- Remark from Rasmus (add sign-off, add base-commit)
- Remark from Sai Krishna Gajula
V5: - Fix warning during build CHECK_DTBS
- Remark from Marek (glue + DT update)
- Remark from Krzysztof about YAML (Make it symmetric)
V6: - Replace pr_debug by dev_dbg
- Split serie driver/DTs separately
V7: - Remark from Marek (update sysconfig register mask)
====================
Link: https://lore.kernel.org/r/20240611083606.733453-1-christophe.roullier@foss.st.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add Ethernet support for STM32MP13.
STM32MP13 is STM32 SOC with 2 GMACs instances.
GMAC IP version is SNPS 4.20.
GMAC IP configure with 1 RX and 1 TX queue.
DMA HW capability register supported
RX Checksum Offload Engine supported
TX Checksum insertion supported
Wake-Up On Lan supported
TSO supported
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add possibility to have second argument in syscon property to manage
mask. This mask will be used to address right BITFIELDS of PMCR register.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Trivial, fix up the comments using 'Mhz' to 'MHz'.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use dev_err()/dev_dbg() and phy_modes() to print PHY mode instead of
pr_debug() and hand-written PHY mode decoding. This way, each debug
print has associated device with it and duplicated mode decoding is
removed.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull the PMCR clock mux configuration into a separate function. This is
the final change of three, which moves external clock rate validation,
external clock selector decoding, and clock mux configuration into
separate functions. This should make the code easier to understand.
No functional change intended.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull the external clock selector into a separate function, to avoid
conflating it with external clock rate validation and clock mux
register configuration. This should make the code easier to read and
understand.
The dwmac->enable_eth_ck variable in the end indicates whether the MAC
clock are supplied by external oscillator (true) or internal RCC clock
IP (false). The dwmac->enable_eth_ck value is set based on multiple DT
properties, some of them deprecated, some of them specific to bus mode.
The following DT properties and variables are taken into account. In
each case, if the property is present or true, MAC clock is supplied
by external oscillator.
- "st,ext-phyclk", assigned to variable dwmac->ext_phyclk
- Used in any mode (MII/RMII/GMII/RGMII)
- The only non-deprecated DT property of the three
- "st,eth-clk-sel", assigned to variable dwmac->eth_clk_sel_reg
- Valid only in GMII/RGMII mode
- Deprecated property, backward compatibility only
- "st,eth-ref-clk-sel", assigned to variable dwmac->eth_ref_clk_sel_reg
- Valid only in RMII mode
- Deprecated property, backward compatibility only
The stm32mp1_select_ethck_external() function handles the aforementioned
DT properties and sets dwmac->enable_eth_ck accordingly.
The stm32mp1_set_mode() is adjusted to call stm32mp1_select_ethck_external()
first and then only use dwmac->enable_eth_ck to determine hardware clock mux
settings.
No functional change intended.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull the external clock frequency validation into a separate function,
to avoid conflating it with external clock DT property decoding and
clock mux register configuration. This should make the code easier to
read and understand.
This does change the code behavior slightly. The clock mux PMCR register
setting now depends solely on the DT properties which configure the clock
mux between external clock and internal RCC generated clock. The mux PMCR
register settings no longer depend on the supplied clock frequency, that
supplied clock frequency is now only validated, and if the clock frequency
is invalid for a mode, it is rejected.
Previously, the code would switch the PMCR register clock mux to internal
RCC generated clock if external clock couldn't provide suitable frequency,
without checking whether the RCC generated clock frequency is correct. Such
behavior is risky at best, user should have configured their clock correctly
in the first place, so this behavior is removed here.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
New STM32 SOC have 2 GMACs instances.
GMAC IP version is SNPS 4.20.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ovl_check_encode_origin() should return a positive number if the lower
dentry is to be encoded, zero otherwise. If there's no upper layer at all
(read-only overlay), then it obviously needs to return positive.
This was broken by commit 16aac5ad1fa9 ("ovl: support encoding
non-decodable file handles"), which didn't take the lower-only
configuration into account.
Fix by checking the no-upper-layer case up-front.
Reported-and-tested-by: Youzhong Yang <youzhong@gmail.com>
Closes: https://lore.kernel.org/all/CADpNCvaBimi+zCYfRJHvCOhMih8OU0rmZkwLuh24MKKroRuT8Q@mail.gmail.com/
Fixes: 16aac5ad1fa9 ("ovl: support encoding non-decodable file handles")
Cc: <stable@vger.kernel.org> # v6.6
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Roll -rc3 and current drm/fixes in.
This will also unstuck our for-next branch.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
While we list the "IRQ status *and acknowledge*" registers as volatile
in the MFD description, they are missing from the writable range array,
so acknowledging any interrupts was met with an -EIO error.
This error propagates up, leading to the whole AXP717 driver failing to
probe, which is fatal to most systems using this PMIC, since most
peripherals refer one of the PMIC voltage rails.
This wasn't noticed on the initial submission, since the interrupt was
completely missing at this point, but the DTs now merged describe the
interrupt, creating the problem.
Add the five registers that hold those bits to the writable array.
This fixes the boot on the Anbernic systems using the AXP717 PMIC.
Fixes: b5bfc8ab2484 ("mfd: axp20x: Add support for AXP717 PMIC")
Reported-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/r/20240613233104.17529-1-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This patch provides support for sending supervision HSR frames with
MAC addresses stored in ProxyNodeTable when RedBox (i.e. HSR-SAN) is
enabled.
Supervision frames with RedBox MAC address (appended as second TLV)
are only send for ProxyNodeTable nodes.
This patch series shall be tested with hsr_redbox.sh script.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As the comment in this function says, the code currently just clears the
CIPSO part with IPOPT_NOP, rather than removing it completely and
trimming the packet. The other cipso_v4_*_delattr() functions, however,
do the proper removal and also calipso_skbuff_delattr() makes an effort
to remove the CALIPSO options instead of replacing them with padding.
Some routers treat IPv4 packets with anything (even NOPs) in the option
header as a special case and take them through a slower processing path.
Consequently, hardening guides such as STIG recommend to configure such
routers to drop packets with non-empty IP option headers [1][2]. Thus,
users might expect NetLabel to produce packets with minimal padding (or
at least with no padding when no actual options are present).
Implement the proper option removal to address this and to be closer to
what the peer functions do.
[1] https://www.stigviewer.com/stig/juniper_router_rtr/2019-09-27/finding/V-90937
[2] https://www.stigviewer.com/stig/cisco_ios_xe_router_rtr/2021-03-26/finding/V-217001
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As evident from the definition of ip_options_get(), the IP option
IPOPT_END is used to pad the IP option data array, not IPOPT_NOP. Yet
the loop that walks the IP options to determine the total IP options
length in cipso_v4_delopt() doesn't take IPOPT_END into account.
Fix it by recognizing the IPOPT_END value as the end of actual options.
Fixes: 014ab19a69c3 ("selinux: Set socket NetLabel based on connection endpoint")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After the channel context emulation, there were reports that
changing the monitor channel no longer works. This is because
those drivers don't have WANT_MONITOR_VIF, so the setting the
channel always exits out quickly.
Fix this by always allocating the virtual monitor sdata, and
simply not telling the driver about it unless it wanted to.
This way, we have an interface/sdata to bind the chanctx to,
and the emulation can work correctly.
Cc: stable@vger.kernel.org
Fixes: 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers")
Reported-and-tested-by: Savyasaachi Vanga <savyasaachiv@gmail.com>
Closes: https://lore.kernel.org/r/chwoymvpzwtbmzryrlitpwmta5j6mtndocxsyqvdyikqu63lon@gfds653hkknl
Link: https://msgid.link/20240612122351.b12d4a109dde.I1831a44417faaab92bea1071209abbe4efbe3fba@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
req->n_channels must be set before req->channels[] can be used.
This patch fixes one of the issues encountered in [1].
[ 83.964255] UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:364:4
[ 83.964258] index 0 is out of range for type 'struct ieee80211_channel *[]'
[...]
[ 83.964264] Call Trace:
[ 83.964267] <TASK>
[ 83.964269] dump_stack_lvl+0x3f/0xc0
[ 83.964274] __ubsan_handle_out_of_bounds+0xec/0x110
[ 83.964278] ieee80211_prep_hw_scan+0x2db/0x4b0
[ 83.964281] __ieee80211_start_scan+0x601/0x990
[ 83.964291] nl80211_trigger_scan+0x874/0x980
[ 83.964295] genl_family_rcv_msg_doit+0xe8/0x160
[ 83.964298] genl_rcv_msg+0x240/0x270
[...]
[1] https://bugzilla.kernel.org/show_bug.cgi?id=218810
Co-authored-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Kenton Groombridge <concord@gentoo.org>
Link: https://msgid.link/20240605152218.236061-1-concord@gentoo.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since the debugfs functions have no-op stubs for CONFIG_DEBUG_FS=n,
the compiler will optimize the rest away since they are no longer referenced.
The benefit of removing the conditional compilation is that the build
is actually tested for both CONFIG_DEBUG_FS configuration values.
Assuming most developers have it enabled, CONFIG_DEBUG_FS=n is not tested
much and may fail the build due to the conditional compilation.
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: pengfuyuan <pengfuyuan@kylinos.cn>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606120842.1377267-1-pengfuyuan@kylinos.cn
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The syzbot fuzzer found that the interrupt-URB completion callback in
the cdc-wdm driver was taking too long, and the driver's immediate
resubmission of interrupt URBs with -EPROTO status combined with the
dummy-hcd emulation to cause a CPU lockup:
cdc_wdm 1-1:1.0: nonzero urb status received: -71
cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes
watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625]
CPU#0 Utilization every 4s during lockup:
#1: 98% system, 0% softirq, 3% hardirq, 0% idle
#2: 98% system, 0% softirq, 3% hardirq, 0% idle
#3: 98% system, 0% softirq, 3% hardirq, 0% idle
#4: 98% system, 0% softirq, 3% hardirq, 0% idle
#5: 98% system, 1% softirq, 3% hardirq, 0% idle
Modules linked in:
irq event stamp: 73096
hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline]
hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994
hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline]
hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551
softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline]
softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582
softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588
CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Testing showed that the problem did not occur if the two error
messages -- the first two lines above -- were removed; apparently adding
material to the kernel log takes a surprisingly large amount of time.
In any case, the best approach for preventing these lockups and to
avoid spamming the log with thousands of error messages per second is
to ratelimit the two dev_err() calls. Therefore we replace them with
dev_err_ratelimited().
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Reported-and-tested-by: syzbot+5f996b83575ef4058638@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/00000000000073d54b061a6a1c65@google.com/
Reported-and-tested-by: syzbot+1b2abad17596ad03dcff@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/000000000000f45085061aa9b37e@google.com/
Fixes: 9908a32e94de ("USB: remove err() macro from usb class drivers")
Link: https://lore.kernel.org/linux-usb/40dfa45b-5f21-4eef-a8c1-51a2f320e267@rowland.harvard.edu/
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/29855215-52f5-4385-b058-91f42c2bee18@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Only the current owner of a request is allowed to write into req->flags.
Hence, the cancellation path should never touch it. Add a new field
instead of the flag, move it into the 3rd cache line because it should
always be initialised. poll_refs can move further as polling is an
involved process anyway.
It's a minimal patch, in the future we can and should find a better
place for it and remove now unused REQ_F_CANCEL_SEQ.
Fixes: 521223d7c229f ("io_uring/cancel: don't default to setting req->work.cancel_seq")
Cc: stable@vger.kernel.org
Reported-by: Li Shi <sl1589472800@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6827b129f8f0ad76fa9d1f0a773de938b240ffab.1718323430.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Core Changes:
- Xe Maintainers update to MAINTAINERS file.
Driver Changes:
- Use correct forcewake assertions.
- Assert that VRAM provisioning is only done on DGFX.
- Flush render caches before user-fence signalling on all engines.
- Move the disable_c6 call since it was sometimes never called.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZmrXV0FoBb8M0c6J@fedora
|
|
USB/UAS devices
Recently it was reported that the following USB storage devices are
unusable with Linux kernel 6.9:
* Kingston DataTraveler G2
* Garmin FR35
This is because attempting to read the IO Advice Hints Grouping mode page
causes these devices to reset. Hence do not read the IO Advice Hints
Grouping mode page from USB/UAS storage devices.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org
Fixes: 4f53138fffc2 ("scsi: sd: Translate data lifetime information")
Reported-by: Joao Machado <jocrismachado@gmail.com>
Closes: https://lore.kernel.org/linux-scsi/20240130214911.1863909-1-bvanassche@acm.org/T/#mf4e3410d8f210454d7e4c3d1fb5c0f41e651b85f
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Bisected-by: Christian Heusel <christian@heusel.eu>
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Closes: https://lore.kernel.org/linux-scsi/CACLx9VdpUanftfPo2jVAqXdcWe8Y43MsDeZmMPooTzVaVJAh2w@mail.gmail.com/
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240613211828.2077477-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Prepare for skipping the IO Advice Hints Grouping mode page for USB storage
devices.
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Joao Machado <jocrismachado@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Christian Heusel <christian@heusel.eu>
Cc: stable@vger.kernel.org
Fixes: 4f53138fffc2 ("scsi: sd: Translate data lifetime information")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240613211828.2077477-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Under the conditions that a device is to be reinitialized within
ufshcd_probe_hba(), the device must first be fully reset.
Resetting the device should include freeing U8 model (member of dev_info)
but does not, and this causes a memory leak. ufs_put_device_desc() is
responsible for freeing model.
unreferenced object 0xffff3f63008bee60 (size 32):
comm "kworker/u33:1", pid 60, jiffies 4294892642
hex dump (first 32 bytes):
54 48 47 4a 46 47 54 30 54 32 35 42 41 5a 5a 41 THGJFGT0T25BAZZA
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc ed7ff1a9):
[<ffffb86705f1243c>] kmemleak_alloc+0x34/0x40
[<ffffb8670511cee4>] __kmalloc_noprof+0x1e4/0x2fc
[<ffffb86705c247fc>] ufshcd_read_string_desc+0x94/0x190
[<ffffb86705c26854>] ufshcd_device_init+0x480/0xdf8
[<ffffb86705c27b68>] ufshcd_probe_hba+0x3c/0x404
[<ffffb86705c29264>] ufshcd_async_scan+0x40/0x370
[<ffffb86704f43e9c>] async_run_entry_fn+0x34/0xe0
[<ffffb86704f34638>] process_one_work+0x154/0x298
[<ffffb86704f34a74>] worker_thread+0x2f8/0x408
[<ffffb86704f3cfa4>] kthread+0x114/0x118
[<ffffb86704e955a0>] ret_from_fork+0x10/0x20
Fixes: 96a7141da332 ("scsi: ufs: core: Add support for reinitializing the UFS device")
Cc: <stable@vger.kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Joel Slebodnick <jslebodn@redhat.com>
Link: https://lore.kernel.org/r/20240613200202.2524194-1-jslebodn@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Regression fix
- Fix an regression issue by adding 640x480 fallback mode
for Exynos HDMI driver.
Bug fix
- Fix a memory leak by ensuring the duplicated EDID is properly freed in the get_modes function.
Code cleanup
- Remove redundant driver owner initialization since platform_driver_register() sets it automatically.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610073839.37430-1-inki.dae@samsung.com
|
|
Martin Schiller says:
====================
net: dsa: lantiq_gswip: code improvements
This patchset for the lantiq_gswip driver is a collection of minor fixes
and coding improvements by Martin Blumenstingl without any real changes
in the actual functionality.
====================
Link: https://lore.kernel.org/r/20240611135434.3180973-1-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Print that no FID is found for bridge %s instead of the incorrect
message that the port is not part of a bridge.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20240611135434.3180973-13-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update the comments in gswip_port_vlan_filtering() so it's clear that
there are two separate cases, one for "tag based VLAN" and another one
for "port based VLAN".
Suggested-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20240611135434.3180973-12-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The port validation in gswip_add_single_port_br() is superfluous and
can be omitted.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240611135434.3180973-11-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Only bits [5:0] in mac_bridge.key[3] are reserved for the FID.
Also, for dynamic (learned) entries, bits [7:4] in mac_bridge.val[0]
represents the port.
Introduce new macros GSWIP_TABLE_MAC_BRIDGE_KEY3_FID and
GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT macro and use it throughout the driver.
Also rename and update GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC to use the
BIT() macro. This makes the driver code easier to understand.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240611135434.3180973-10-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The addr variable in gswip_port_fdb_dump() stores a mac address. Use
ETH_ALEN to make this consistent across other drivers.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20240611135434.3180973-9-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make the check for the CPU port in gswip_port_change_mtu() consistent
with other areas of the driver by using dsa_is_cpu_port().
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20240611135434.3180973-8-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
