| Age | Commit message (Collapse) | Author |
|---|
|
The acpi_cst_latency_cmp() comparison function currently used for
sorting C-state latencies does not satisfy transitivity, causing
incorrect sorting results.
Specifically, if there are two valid acpi_processor_cx elements A and B
and one invalid element C, it may occur that A < B, A = C, and B = C.
Sorting algorithms assume that if A < B and A = C, then C < B, leading
to incorrect ordering.
Given the small size of the array (<=8), we replace the library sort
function with a simple insertion sort that properly ignores invalid
elements and sorts valid ones based on latency. This change ensures
correct ordering of the C-state latencies.
Fixes: 65ea8f2c6e23 ("ACPI: processor idle: Fix up C-state latency if not ordered")
Reported-by: Julian Sikorski <belegdol@gmail.com>
Closes: https://lore.kernel.org/lkml/70674dc7-5586-4183-8953-8095567e73df@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240701205639.117194-1-visitorckw@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In the ref-verify tool, when processing the inline references of an extent
item, we may end up returning with uninitialized return value, because:
1) The 'ret' variable is not initialized if there are no inline extent
references ('ptr' == 'end' before the while loop starts);
2) If we find an extent owner inline reference we don't initialize 'ret'.
So fix these cases by initializing 'ret' to 0 when declaring the variable
and set it to -EINVAL if we find an extent owner inline references and
simple quotas are not enabled (as well as print an error message).
Reported-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/59b40ebe-c824-457d-8b24-0bbca69d472b@gmail.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Syzbot reports the following regression detected by KASAN:
BUG: KASAN: slab-out-of-bounds in btrfs_qgroup_inherit+0x42e/0x2e20 fs/btrfs/qgroup.c:3277
Read of size 8 at addr ffff88814628ca50 by task syz-executor318/5171
CPU: 0 PID: 5171 Comm: syz-executor318 Not tainted 6.10.0-rc2-syzkaller-00010-g2ab795141095 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
btrfs_qgroup_inherit+0x42e/0x2e20 fs/btrfs/qgroup.c:3277
create_pending_snapshot+0x1359/0x29b0 fs/btrfs/transaction.c:1854
create_pending_snapshots+0x195/0x1d0 fs/btrfs/transaction.c:1922
btrfs_commit_transaction+0xf20/0x3740 fs/btrfs/transaction.c:2382
create_snapshot+0x6a1/0x9e0 fs/btrfs/ioctl.c:875
btrfs_mksubvol+0x58f/0x710 fs/btrfs/ioctl.c:1029
btrfs_mksnapshot+0xb5/0xf0 fs/btrfs/ioctl.c:1075
__btrfs_ioctl_snap_create+0x387/0x4b0 fs/btrfs/ioctl.c:1340
btrfs_ioctl_snap_create_v2+0x1f2/0x3a0 fs/btrfs/ioctl.c:1422
btrfs_ioctl+0x99e/0xc60
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcbf1992509
RSP: 002b:00007fcbf1928218 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fcbf1a1f618 RCX: 00007fcbf1992509
RDX: 0000000020000280 RSI: 0000000050009417 RDI: 0000000000000003
RBP: 00007fcbf1a1f610 R08: 00007ffea1298e97 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fcbf19eb660
R13: 00000000200002b8 R14: 00007fcbf19e60c0 R15: 0030656c69662f2e
</TASK>
And it also pinned it down to commit b5357cb268c4 ("btrfs: qgroup: do not
check qgroup inherit if qgroup is disabled").
[CAUSE]
That offending commit skips the whole qgroup inherit check if qgroup is
not enabled.
But that also skips the very basic checks like
num_ref_copies/num_excl_copies and the structure size checks.
Meaning if a qgroup enable/disable race is happening at the background,
and we pass a btrfs_qgroup_inherit structure when the qgroup is
disabled, the check would be completely skipped.
Then at the time of transaction commitment, qgroup is re-enabled and
btrfs_qgroup_inherit() is going to use the incorrect structure and
causing the above KASAN error.
[FIX]
Make btrfs_qgroup_check_inherit() only skip the source qgroup checks.
So that even if invalid btrfs_qgroup_inherit structure is passed in, we
can still reject invalid ones no matter if qgroup is enabled or not.
Furthermore we do already have an extra safety inside
btrfs_qgroup_inherit(), which would just ignore invalid qgroup sources,
so even if we only skip the qgroup source check we're still safe.
Reported-by: syzbot+a0d1f7e26910be4dc171@syzkaller.appspotmail.com
Fixes: b5357cb268c4 ("btrfs: qgroup: do not check qgroup inherit if qgroup is disabled")
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
calc_available_free_space() returns the total size of metadata (or
system) block groups, which can be allocated from unallocated disk
space. The logic is wrong on zoned mode in two places.
First, the calculation of data_chunk_size is wrong. We always allocate
one zone as one chunk, and no partial allocation of a zone. So, we
should use zone_size (= data_sinfo->chunk_size) as it is.
Second, the result "avail" may not be zone aligned. Since we always
allocate one zone as one chunk on zoned mode, returning non-zone size
aligned bytes will result in less pressure on the async metadata reclaim
process.
This is serious for the nearly full state with a large zone size device.
Allowing over-commit too much will result in less async reclaim work and
end up in ENOSPC. We can align down to the zone size to avoid that.
Fixes: cb6cbab79055 ("btrfs: adjust overcommit logic when very close to full")
CC: stable@vger.kernel.org # 6.9
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use the .map_allock_check callback to perform allocation checks before
allocating memory for the devmap.
Signed-off-by: Florian Lehner <dev@der-flo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240615101158.57889-1-dev@der-flo.net
|
|
Now that the s390x JIT supports arena, remove the respective tests from
the denylist.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-13-iii@linux.ibm.com
|
|
Check that __sync_*() functions don't cause kernel panics when handling
freed arena pages.
x86_64 does not support some arena atomics yet, and aarch64 may or may
not support them, based on the availability of LSE atomics at run time.
Do not enable this test for these architectures for simplicity.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-12-iii@linux.ibm.com
|
|
While clang uses __attribute__((address_space(1))) both for defining
arena pointers and arena globals, GCC requires different syntax for
both. While __arena covers the first use case, introduce __arena_global
to cover the second one.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-11-iii@linux.ibm.com
|
|
s390x supports most BPF atomics using single instructions, which
makes implementing arena support a matter of adding arena address to
the base register (unfortunately atomics do not support index
registers), and wrapping the respective native instruction in probing
sequences.
An exception is BPF_XCHG, which is implemented using two different
memory accesses and a loop. Make sure there is enough extable entries
for both instructions. Compute the base address once for both memory
accesses. Since on exception we need to land after the loop, emit the
nops manually.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-10-iii@linux.ibm.com
|
|
Now that BPF_PROBE_MEM32 and address space cast instructions are
implemented, tell the verifier that the JIT supports arena.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-9-iii@linux.ibm.com
|
|
The new address cast instruction translates arena offsets to userspace
addresses. NULL pointers must not be translated.
The common code sets up the mappings in such a way that it's enough to
replace the higher 32 bits to achieve the desired result. s390x has
just an instruction for this: INSERT IMMEDIATE.
Implement the sequence using 3 instruction: LOAD AND TEST, BRANCH
RELATIVE ON CONDITION and INSERT IMMEDIATE.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-8-iii@linux.ibm.com
|
|
BPF_PROBE_MEM32 is a new mode for LDX, ST and STX instructions. The JIT
is supposed to add the start address of the kernel arena mapping to the
%dst register, and use a probing variant of the respective memory
access.
Reuse the existing probing infrastructure for that. Put the arena
address into the literal pool, load it into %r1 and use that as an
index register. Do not clear any registers in ex_handler_bpf() for
failing ST and STX instructions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-7-iii@linux.ibm.com
|
|
Currently we land on the nop, which is unnecessary: we can just as well
begin executing the next instruction. Furthermore, the upcoming arena
support for the loop-based BPF_XCHG implementation will require landing
on an instruction that comes after the loop.
So land on the next JITed instruction, which covers both cases.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-6-iii@linux.ibm.com
|
|
Currently probe insns are handled by two "if" statements at the
beginning and at the end of bpf_jit_insn(). The first one needs to be
in sync with the huge insn->code statement that follows it, which was
not a problem so far, since the check is small.
The introduction of arena will make it significantly larger, and it
will no longer be obvious whether it is in sync with the opcode switch.
Move these statements to the new bpf_jit_probe_load_pre() and
bpf_jit_probe_post() functions, and call them only from cases that need
them.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-5-iii@linux.ibm.com
|
|
Commit 7fc8c362e782 ("s390/bpf: encode register within extable entry")
introduced explicit passing of the number of the register to be cleared
to ex_handler_bpf(), which replaced deducing it from the respective
native load instruction using get_probe_mem_regno().
Replace the second and last usage in the same manner, and remove this
function.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-4-iii@linux.ibm.com
|
|
The upcoming arena support for the loop-based BPF_XCHG implementation
requires emitting nop and extable entries separately. Move nop handling
into a separate function, and keep track of the nop offset.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-3-iii@linux.ibm.com
|
|
Zero-extending results of atomic probe operations fails with:
verifier bug. zext_dst is set, but no reg is defined
The problem is that insn_def_regno() handles BPF_ATOMICs, but not
BPF_PROBE_ATOMICs. Fix by adding the missing condition.
Fixes: d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-2-iii@linux.ibm.com
|
|
As Quentin said [0], BPF map pinning will fail if the pinmaps path is not
under the bpffs, like:
libbpf: specified path /home/ubuntu/test/sock_ops_map is not on BPF FS
Error: failed to pin all maps
[0] https://github.com/libbpf/bpftool/issues/146
Fixes: 3767a94b3253 ("bpftool: add pinmaps argument to the load/loadall")
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Quentin Monnet <qmo@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240702131150.15622-1-chen.dylane@gmail.com
|
|
For bundle receives to function properly, the previous iteration msg_inq
value is needed to make a judgement call on how much data there is to
receive. A previous fix ended up clearing it earlier as an error case
would potentially errantly set IORING_CQE_F_SOCK_NONEMPTY if the request
got failed.
Move the assignment to post assigning buffers for the receive, but
ensure that it's cleared for the buffer selection error case. With that,
buffer selection has the right msg_inq value and can correctly bundle
receives as designed.
Noticed while testing where it was apparent than more than 1 buffer was
never received. After fix was in place, multiple buffers are correctly
picked for receive. This provides a 10x speedup for the test case, as
the buffer size used was 64b.
Fixes: 18414a4a2eab ("io_uring/net: assign kmsg inq/flags before buffer selection")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Jiawen Wu says:
====================
net: txgbe: fix MSI and INTx interrupts
Fix MSI and INTx interrupts for txgbe driver.
changes in v3:
- Add flag wx->misc_irq_domain.
- Separate commits.
- Detail null-defer events.
changes in v2: https://lore.kernel.org/all/20240626060703.31652-1-jiawenwu@trustnetic.com
- Split into two commits.
- Detail commit description.
v1: https://lore.kernel.org/all/20240621080951.14368-1-jiawenwu@trustnetic.com
====================
Link: https://patch.msgid.link/20240701071416.8468-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When using MSI/INTx interrupt, the shared interrupts are still being
handled in the device remove routine, before free IRQs. So isb memory
is still read after it is freed. Thus move wx_free_isb_resources()
from txgbe_close() to txgbe_remove(). And fix the improper isb free
action in txgbe_open() error handling path.
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Rename original txgbe_misc_irq_handle() to txgbe_misc_irq_thread_fn()
since it is the handle thread to wake up. And add the primary handler
to deal the case of MSI/INTx, because there is a schedule NAPI poll.
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When using MSI or INTx interrupts, request_irq() for pdev->irq will
conflict with request_threaded_irq() for txgbe->misc.irq, to cause
system crash. So remove txgbe_request_irq() for MSI/INTx case, and
rename txgbe_request_msix_irqs() since it only request for queue irqs.
Add wx->misc_irq_domain to determine whether the driver creates an IRQ
domain and threaded request the IRQs.
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When using MSI/INTx interrupts, wx->num_q_vectors is uninitialized.
Thus there will be kernel panic in wx_alloc_q_vectors() to allocate
queue vectors.
Fixes: 3f703186113f ("net: libwx: Add irq flow functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add testcase where 7th argument is struct for architectures with 8 argument
registers, and increase the complexity of the struct.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240702121944.1091530-4-pulehui@huaweicloud.com
|
|
Factor out many args tests from tracing_struct and rename some function names
to make more sense. Meanwhile, remove unnecessary skeleton detach operation
as it will be covered by skeleton destroy operation.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240702121944.1091530-3-pulehui@huaweicloud.com
|
|
The global hci_hotkey_quickstart quirk flag is tested in
toshiba_acpi_enable_hotkeys() before the quirk flag is properly
initialized based on SMBIOS data. This causes the quirk to be
applied to all models, some of which behave erratically as a
result.
Fix this by initializing the global quirk flags during module
initialization before registering the ACPI driver. This also
allows us to mark toshiba_dmi_quirks[] as __initconst.
Fixes: 23f1d8b47d12 ("platform/x86: toshiba_acpi: Add quirk for buttons on Z830")
Reported-by: kemal <kmal@cock.li>
Closes: https://lore.kernel.org/platform-driver-x86/R4CYFS.TWB8QUU2SHWI1@cock.li/
Tested-by: kemal <kmal@cock.li>
Cc: stable@vger.kernel.org
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240701194539.348937-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This patch adds 12 function arguments support for riscv64 bpf trampoline.
The current bpf trampoline supports <= sizeof(u64) bytes scalar arguments [0]
and <= 16 bytes struct arguments [1]. Therefore, we focus on the situation
where scalars are at most XLEN bits and aggregates whose total size does not
exceed 2×XLEN bits in the riscv calling convention [2].
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://elixir.bootlin.com/linux/v6.8/source/kernel/bpf/btf.c#L6184 [0]
Link: https://elixir.bootlin.com/linux/v6.8/source/kernel/bpf/btf.c#L6769 [1]
Link: https://github.com/riscv-non-isa/riscv-elf-psabi-doc/releases/download/draft-20230929-e5c800e661a53efe3c2678d71a306323b60eb13b/riscv-abi.pdf [2]
Link: https://lore.kernel.org/bpf/20240702121944.1091530-2-pulehui@huaweicloud.com
|
|
Christophe Roullier says:
====================
Fixes for stm32-dwmac driver fails to probe
Mark Brown found issue during stm32-dwmac probe:
For the past few days networking has been broken on the Avenger 96, a
stm32mp157a based platform. The stm32-dwmac driver fails to probe:
<6>[ 1.894271] stm32-dwmac 5800a000.ethernet: IRQ eth_wake_irq not found
<6>[ 1.899694] stm32-dwmac 5800a000.ethernet: IRQ eth_lpi not found
<6>[ 1.905849] stm32-dwmac 5800a000.ethernet: IRQ sfty not found
<3>[ 1.912304] stm32-dwmac 5800a000.ethernet: Unable to parse OF data
<3>[ 1.918393] stm32-dwmac 5800a000.ethernet: probe with driver stm32-dwmac failed with error -75
which looks a bit odd given the commit contents but I didn't look at the
driver code at all.
Full boot log here:
https://lava.sirena.org.uk/scheduler/job/467150
A working equivalent is here:
https://lava.sirena.org.uk/scheduler/job/466518
I delivered 2 fixes to solve issue.
====================
Link: https://patch.msgid.link/20240701064838.425521-1-christophe.roullier@foss.st.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The mask parameter of syscfg property is mandatory for MP13 but
optional for all other cases.
The function should not return error code because for non-MP13
the missing syscfg phandle in DT is not considered an error.
So reset err to 0 in that case to support existing DTs without
syscfg phandle.
Fixes: 50bbc0393114 ("net: stmmac: dwmac-stm32: add management of stm32mp13 for stm32")
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
checking clk rate
When we want to use clock from RCC to clock Ethernet PHY (with ETHCK)
we need to check if value of clock rate is authorized.
If ETHCK is unused, the ETHCK frequency is 0Hz and validation fails.
It makes no sense to validate unused ETHCK, so skip the validation.
Fixes: 582ac134963e ("net: stmmac: dwmac-stm32: Separate out external clock rate validation")
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Correct member @num_por with size of right array @emac_v4_0_0_por for
struct ethqos_emac_driver_data @emac_v4_0_0_data.
Cc: stable@vger.kernel.org
Fixes: 8c4d92e82d50 ("net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms")
Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20240701014720.2547856-1-quic_yijiyang@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Indeed the maximum DMA burst length can be programmed not only for DW
xGMACs, Allwinner EMACs and Spear SoC GMAC, but in accordance with
[1, 2, 3] for Generic DW *MAC IP-cores. Moreover the STMMAC driver parses
the property and then apply the configuration for all supported DW MAC
devices. All of that makes the property being available for all IP-cores
the bindings supports. Let's make sure the PBL-related properties are
validated for all of them by the common DW *MAC DT schema.
[1] DesignWare Cores Ethernet MAC Universal Databook, Revision 3.73a,
October 2013, p.378.
[2] DesignWare Cores Ethernet Quality-of-Service Databook, Revision 5.10a,
December 2017, p.1223.
[3] DesignWare Cores XGMAC - 10G Ethernet MAC Databook, Revision 2.11a,
September 2015, p.469-473.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240628154515.8783-1-fancer.lancer@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Sebastian Andrzej Siewior says:
====================
net: bpf_net_context cleanups.
a small series with bpf_net_context cleanups/ improvements.
Jakub asked for #1 and #2 and while looking around I made #3.
====================
Link: https://patch.msgid.link/20240628103020.1766241-1-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The bpf_net_ctx_get_.*_flush_list() are used at the top of the function.
This means the variable is always assigned even if unused. By moving the
function to where it is used, it is possible to delay the initialisation
until it is unavoidable.
Not sure how much this gains in reality but by looking at bq_enqueue()
(in devmap.c) gcc pushes one register less to the stack. \o/.
Move flush list retrieval to where it is used.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Every NIC driver utilizing XDP should invoke xdp_do_flush() after
processing all packages. With the introduction of the bpf_net_context
logic the flush lists (for dev, CPU-map and xsk) are lazy initialized
only if used. However xdp_do_flush() tries to flush all three of them so
all three lists are always initialized and the likely empty lists are
"iterated".
Without the usage of XDP but with CONFIG_DEBUG_NET the lists are also
initialized due to xdp_do_check_flushed().
Jakub suggest to utilize the hints in bpf_net_context and avoid invoking
the flush function. This will also avoiding initializing the lists which
are otherwise unused.
Introduce bpf_net_ctx_get_all_used_flush_lists() to return the
individual list if not-empty. Use the logic in xdp_do_flush() and
xdp_do_check_flushed(). Remove the not needed .*_check_flush().
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is no clone() invocation within a bpf_net_ctx_…() block. Therefore
the task_struct::bpf_net_context has always to be NULL and an explicit
initialisation is not required.
Remove the NULL assignment in the clone() path.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce dynamic adjustment capabilities for fill_size and comp_size
parameters to support larger batch sizes beyond the previous 2K limit.
Update HW_SW_MAX_RING_SIZE test cases to evaluate AF_XDP's robustness by
pushing hardware and software ring sizes to their limits. This test
ensures AF_XDP's reliability amidst potential producer/consumer throttling
due to maximum ring utilization.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20240702055916.48071-3-tushar.vyavahare@intel.com
|
|
in xskxceiver
Previously, HW_SW_MIN_RING_SIZE and HW_SW_MAX_RING_SIZE test cases were
not validating Tx/Rx traffic at all due to early return after changing HW
ring size in testapp_validate_traffic().
Fix the flow by checking return value of set_ring_size() and act upon it
rather than terminating the test case there.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20240702055916.48071-2-tushar.vyavahare@intel.com
|
|
David Wei says:
====================
page_pool: bnxt_en: unlink old page pool in queue api using helper
56ef27e3 unexported page_pool_unlink_napi() and renamed it to
page_pool_disable_direct_recycling(). This is because there was no
in-tree user of page_pool_unlink_napi().
Since then Rx queue API and an implementation in bnxt got merged. In the
bnxt implementation, it broadly follows the following steps: allocate
new queue memory + page pool, stop old rx queue, swap, then destroy old
queue memory + page pool.
The existing NAPI instance is re-used so when the old page pool that is
no longer used but still linked to this shared NAPI instance is
destroyed, it will trigger warnings.
In my initial patches I unlinked a page pool from a NAPI instance
directly. Instead, export page_pool_disable_direct_recycling() and call
that instead to avoid having a driver touch a core struct.
====================
Link: https://patch.msgid.link/20240627030200.3647145-1-dw@davidwei.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Have bnxt call page_pool_disable_direct_recycling() to unlink the old
page pool when resetting a queue prior to destroying it, instead of
touching a netdev core struct directly.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
56ef27e3 unexported page_pool_unlink_napi() and renamed it to
page_pool_disable_direct_recycling(). This is because there was no
in-tree user of page_pool_unlink_napi().
Since then Rx queue API and an implementation in bnxt got merged. In the
bnxt implementation, it broadly follows the following steps: allocate
new queue memory + page pool, stop old rx queue, swap, then destroy old
queue memory + page pool.
The existing NAPI instance is re-used so when the old page pool that is
no longer used but still linked to this shared NAPI instance is
destroyed, it will trigger warnings.
In my initial patches I unlinked a page pool from a NAPI instance
directly. Instead, export page_pool_disable_direct_recycling() and call
that instead to avoid having a driver touch a core struct.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We only use the mapping in a single context, so kmap_local is sufficient
and cheaper. Make sure to use skb_frag_foreach_page as skb frags may
contain compound pages and we need to map page by page.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202406161539.b5ff7b20-oliver.sang@intel.com
Fixes: 950fcaecd5cc ("datagram: consolidate datagram copy to iter helpers")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://patch.msgid.link/20240626100008.831849-1-sagi@grimberg.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
RCK is synchronize RC calibration. Driver triggers this calibration and
writes the result to registers.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240627025849.25198-5-pkshih@realtek.com
|
|
DACK (digital-to-analog converters calibration) is used to calibrate DAC
to output signals as expected.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240627025849.25198-4-pkshih@realtek.com
|
|
RX DCK stands for receiver DC calibration. With this calibration, we have
proper DC offset to reflect correct received signal strength indicator.
Do this calibration when bringing up interface and going to connect.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240627025849.25198-3-pkshih@realtek.com
|
|
IQ signal calibration is a very important calibration to yield good RF
performance. We do this calibration once we are going to an AP. During
scanning phase, without this calibration RF performance is still
acceptable because it transmits and receives with low data rate at
this phase.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240627025849.25198-2-pkshih@realtek.com
|
|
Calculate a TX power constraint based on content of ieee80211 Transmit
Power Envelope (TPE). Since HW control registers aren't designed as many
as all kinds of TPE fields, we strictly intersect all TPE inputs in driver.
Then, according to result, constrain TX power via TX power limit/limit_RU.
Besides, extend dbgfs txpwr_table to show info about 6 GHz regulatory.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240626023237.7901-1-pkshih@realtek.com
|
|
Add additional policy option to let Bluetooth audio can play well
during Wi-Fi is hardware scanning.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240626023129.7776-1-pkshih@realtek.com
|
|
Pavel Begunkov says:
====================
zerocopy tx cleanups
Assorted zerocopy send path cleanups, the main part of which is
moving some net stack specific accounting out of io_uring back
to net/ in Patch 4.
====================
Link: https://patch.msgid.link/cover.1719190216.git.asml.silence@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
