| Age | Commit message (Collapse) | Author |
|---|
|
Since commit bd5305dcabbc ("tty: serial: fsl_lpuart: do software reset
for imx7ulp and imx8qxp"), certain i.MX UARTs are reset after they've
already been registered. Register state may thus be clobbered after
user space has begun to open and access the UART.
Avoid by performing the reset prior to registration.
Fixes: bd5305dcabbc ("tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp")
Cc: stable@vger.kernel.org # v5.15+
Cc: Fugang Duan <fugang.duan@nxp.com>
Cc: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/72fb646c1b0b11c989850c55f52f9ff343d1b2fa.1662884345.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
RHEL/Fedora RPM build checks are stricter, and complain when executable
files don't have a shebang line, e.g.
*** WARNING: ./kselftests/net/forwarding/sch_red.sh is executable but has no shebang, removing executable bit
Fix it by adding shebang line.
Fixes: 6cf0291f9517 ("selftests: forwarding: Add a RED test for SW datapath")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20220922024453.437757-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When reading the timestamp is required bnxt_tx_int() hands
over the ownership of the completed skb to the PTP worker.
The skb should not be used afterwards, as the worker may
run before the rest of our code and free the skb, leading
to a use-after-free.
Since dev_kfree_skb_any() accepts NULL make the loss of
ownership more obvious and set skb to NULL.
Fixes: 83bb623c968e ("bnxt_en: Transmit and retrieve packet timestamps")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20220921201005.335390-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In prestera_port_sfp_bind(), there are two refcounting bugs:
(1) we should call of_node_get() before of_find_node_by_name() as
it will automaitcally decrease the refcount of 'from' argument;
(2) we should call of_node_put() for the break of the iteration
for_each_child_of_node() as it will automatically increase and
decrease the 'child'.
Fixes: 52323ef75414 ("net: marvell: prestera: add phylink support")
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Link: https://lore.kernel.org/r/20220921133245.4111672-1-windhl@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The symbol is not used outside of the file, so mark it static.
Fixes the following warning:
./drivers/pcmcia/at91_cf.c:49:15: warning: symbol 'mc' was not declared. Should it be static?
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Commit d3164e2f3b0a ("MIPS: Remove VR41xx support") removed support
for MIPS VR41xx platform, so remove exclusive drivers for this
platform, too.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
sa11x0_drv_pcmcia_legacy_remove() returns zero unconditionally. Letting it
return void instead makes it easier to see in the caller that there is no
error to handle.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
MII_BUS_ID_SIZE is larger than MAX_PHYS_ITEM_ID_LEN
so we use the former here to set the parent port id.
Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20220922063049.10388-1-alexandru.tachici@analog.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To determine whether the mba_MBps option to resctrl should be supported,
resctrl tests the boot CPUs' x86_vendor.
This isn't portable, and needs abstracting behind a helper so this check
can be part of the filesystem code that moves to /fs/.
Re-use the tests set_mba_sc() does to determine if the mba_sc is supported
on this system. An 'alloc_capable' test is added so that support for the
controls isn't implied by the 'delay_linear' property, which is always
true for MPAM. Because mbm_update() only update mba_sc if the mbm_local
counters are enabled, supports_mba_mbps() checks is_mbm_local_enabled().
(instead of using is_mbm_enabled(), which checks both).
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-8-james.morse@arm.com
|
|
arch_dma_prep_coherent() is called when preparing a non-cacheable region
for a consistent DMA buffer allocation. Since the buffer pages may
previously have been written via a cacheable mapping and consequently
allocated as dirty cachelines, the purpose of this function is to remove
these dirty lines from the cache, writing them back so that the
non-coherent device is able to see them.
On arm64, this operation can be achieved with a clean to the point of
coherency; a subsequent invalidation is not required and serves little
purpose in the presence of a cacheable alias (e.g. the linear map),
since clean lines can be speculatively fetched back into the cache after
the invalidation operation has completed.
Relax the cache maintenance in arch_dma_prep_coherent() so that only a
clean, and not a clean-and-invalidate operation is performed.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220823122111.17439-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
set_mba_sc() enables the 'software controller' to regulate the bandwidth
based on the byte counters. This can be managed entirely in the parts
of resctrl that move to /fs/, without any extra support from the
architecture specific code. set_mba_sc() is called by rdt_enable_ctx()
during mount and unmount. It currently resets the arch code's ctrl_val[]
and mbps_val[] arrays.
The ctrl_val[] was already reset when the domain was created, and by
reset_all_ctrls() when the filesystem was last unmounted. Doing the work
in set_mba_sc() is not necessary as the values are already at their
defaults due to the creation of the domain, or were previously reset
during umount(), or are about to reset during umount().
Add a reset of the mbps_val[] in reset_all_ctrls(), allowing the code in
set_mba_sc() that reaches in to the architecture specific structures to
be removed.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-7-james.morse@arm.com
|
|
Document that the VG register is available in Perf samples
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220901132658.1024635-3-james.clark@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Dwarf based unwinding in a function that pushes SVE registers onto
the stack requires the unwinder to know the length of the SVE register
to calculate the stack offsets correctly. This was added to the Arm
specific Dwarf spec as the VG pseudo register[1].
Add the vector length at position 46 if it's requested by userspace and
SVE is supported. If it's not supported then fail to open the event.
The vector length must be on each sample because it can be changed
at runtime via a prctl or ptrace call. Also by adding it as a register
rather than a separate attribute, minimal changes will be required in an
unwinder that already indexes into the register list.
[1]: https://github.com/ARM-software/abi-aa/blob/main/aadwarf64/aadwarf64.rst
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20220901132658.1024635-2-james.clark@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
tfilter_put need to be called to put the refount got by tp->ops->get to
avoid possible refcount leak when chain->tmplt_ops != NULL and
chain->tmplt_ops != tp->ops.
Fixes: 7d5509fa0d3d ("net: sched: extend proto ops with 'put' callback")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20220921092734.31700-1-hbh25y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add scancodes reported by the touchpad on/off button. The actual disabling
and enabling is done in hardware, and this just reports that change to
userspace.
Signed-off-by: Daniel Houldsworth <dhould3@gmail.com>
Link: https://lore.kernel.org/r/20220922115459.6511-1-dhould3@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
By swapping the definition of skl_int3472_discrete_remove() and
skl_int3472_discrete_probe() the forward declaration of the former can
be dropped. This is a good thing as it removes code duplication.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20220920070101.907596-1-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
turn_on_panel_on_resume is only used in toshiba_acpi.c now, change it
to static.
Fixes: 3cb1f40dfdc3 ("drivers/platform: toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220920084434.3739493-1-yangyingliang@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
There is a separate receive path for small packets (under 256 bytes).
Instead of allocating a new dma-capable skb to be used for the next packet,
this path allocates a skb and copies the data into it (reusing the existing
sbk for the next packet). There are two bytes of junk data at the beginning
of every packet. I believe these are inserted in order to allow aligned DMA
and IP headers. We skip over them using skb_reserve. Before copying over
the data, we must use a barrier to ensure we see the whole packet. The
current code only synchronizes len bytes, starting from the beginning of
the packet, including the junk bytes. However, this leaves off the final
two bytes in the packet. Synchronize the whole packet.
To reproduce this problem, ping a HME with a payload size between 17 and
214
$ ping -s 17 <hme_address>
which will complain rather loudly about the data mismatch. Small packets
(below 60 bytes on the wire) do not have this issue. I suspect this is
related to the padding added to increase the minimum packet size.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220920235018.1675956-1-seanga2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
"USB-serial fixes for 6.0-rc7
Here are some new modem device ids.
All have been in linux-next with no reported issues."
* tag 'usb-serial-6.0-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Quectel RM520N
USB: serial: option: add Quectel BG95 0x0203 composition
|
|
Prevent udp_read_skb() from flooding the syslog.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Link: https://lore.kernel.org/r/20220921005915.2697-1-yepeilin.cs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Because domains are exposed to user-space via resctrl, the filesystem
must update its state when CPU hotplug callbacks are triggered.
Some of this work is common to any architecture that would support
resctrl, but the work is tied up with the architecture code to
free the memory.
Move the monitor subdir removal and the cancelling of the mbm/limbo
works into a new resctrl_offline_domain() call. These bits are not
specific to the architecture. Grouping them in one function allows
that code to be moved to /fs/ and re-used by another architecture.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-6-james.morse@arm.com
|
|
Jonathan Toppins says:
====================
bonding: fix NULL deref in bond_rr_gen_slave_id
Fix a NULL dereference of the struct bonding.rr_tx_counter member because
if a bond is initially created with an initial mode != zero (Round Robin)
the memory required for the counter is never created and when the mode is
changed there is never any attempt to verify the memory is allocated upon
switching modes.
====================
Link: https://lore.kernel.org/r/cover.1663694476.git.jtoppins@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switch to use devm_spi_alloc_master() to simpify error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20220920114448.2681053-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This bonding selftest used to cause a kernel oops on aarch64
and should be architectures agnostic.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a NULL dereference of the struct bonding.rr_tx_counter member because
if a bond is initially created with an initial mode != zero (Round Robin)
the memory required for the counter is never created and when the mode is
changed there is never any attempt to verify the memory is allocated upon
switching modes.
This causes the following Oops on an aarch64 machine:
[ 334.686773] Unable to handle kernel paging request at virtual address ffff2c91ac905000
[ 334.694703] Mem abort info:
[ 334.697486] ESR = 0x0000000096000004
[ 334.701234] EC = 0x25: DABT (current EL), IL = 32 bits
[ 334.706536] SET = 0, FnV = 0
[ 334.709579] EA = 0, S1PTW = 0
[ 334.712719] FSC = 0x04: level 0 translation fault
[ 334.717586] Data abort info:
[ 334.720454] ISV = 0, ISS = 0x00000004
[ 334.724288] CM = 0, WnR = 0
[ 334.727244] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000008044d662000
[ 334.733944] [ffff2c91ac905000] pgd=0000000000000000, p4d=0000000000000000
[ 334.740734] Internal error: Oops: 96000004 [#1] SMP
[ 334.745602] Modules linked in: bonding tls veth rfkill sunrpc arm_spe_pmu vfat fat acpi_ipmi ipmi_ssif ixgbe igb i40e mdio ipmi_devintf ipmi_msghandler arm_cmn arm_dsu_pmu cppc_cpufreq acpi_tad fuse zram crct10dif_ce ast ghash_ce sbsa_gwdt nvme drm_vram_helper drm_ttm_helper nvme_core ttm xgene_hwmon
[ 334.772217] CPU: 7 PID: 2214 Comm: ping Not tainted 6.0.0-rc4-00133-g64ae13ed4784 #4
[ 334.779950] Hardware name: GIGABYTE R272-P31-00/MP32-AR1-00, BIOS F18v (SCP: 1.08.20211002) 12/01/2021
[ 334.789244] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 334.796196] pc : bond_rr_gen_slave_id+0x40/0x124 [bonding]
[ 334.801691] lr : bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding]
[ 334.807962] sp : ffff8000221733e0
[ 334.811265] x29: ffff8000221733e0 x28: ffffdbac8572d198 x27: ffff80002217357c
[ 334.818392] x26: 000000000000002a x25: ffffdbacb33ee000 x24: ffff07ff980fa000
[ 334.825519] x23: ffffdbacb2e398ba x22: ffff07ff98102000 x21: ffff07ff981029c0
[ 334.832646] x20: 0000000000000001 x19: ffff07ff981029c0 x18: 0000000000000014
[ 334.839773] x17: 0000000000000000 x16: ffffdbacb1004364 x15: 0000aaaabe2f5a62
[ 334.846899] x14: ffff07ff8e55d968 x13: ffff07ff8e55db30 x12: 0000000000000000
[ 334.854026] x11: ffffdbacb21532e8 x10: 0000000000000001 x9 : ffffdbac857178ec
[ 334.861153] x8 : ffff07ff9f6e5a28 x7 : 0000000000000000 x6 : 000000007c2b3742
[ 334.868279] x5 : ffff2c91ac905000 x4 : ffff2c91ac905000 x3 : ffff07ff9f554400
[ 334.875406] x2 : ffff2c91ac905000 x1 : 0000000000000001 x0 : ffff07ff981029c0
[ 334.882532] Call trace:
[ 334.884967] bond_rr_gen_slave_id+0x40/0x124 [bonding]
[ 334.890109] bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding]
[ 334.896033] __bond_start_xmit+0x128/0x3a0 [bonding]
[ 334.901001] bond_start_xmit+0x54/0xb0 [bonding]
[ 334.905622] dev_hard_start_xmit+0xb4/0x220
[ 334.909798] __dev_queue_xmit+0x1a0/0x720
[ 334.913799] arp_xmit+0x3c/0xbc
[ 334.916932] arp_send_dst+0x98/0xd0
[ 334.920410] arp_solicit+0xe8/0x230
[ 334.923888] neigh_probe+0x60/0xb0
[ 334.927279] __neigh_event_send+0x3b0/0x470
[ 334.931453] neigh_resolve_output+0x70/0x90
[ 334.935626] ip_finish_output2+0x158/0x514
[ 334.939714] __ip_finish_output+0xac/0x1a4
[ 334.943800] ip_finish_output+0x40/0xfc
[ 334.947626] ip_output+0xf8/0x1a4
[ 334.950931] ip_send_skb+0x5c/0x100
[ 334.954410] ip_push_pending_frames+0x3c/0x60
[ 334.958758] raw_sendmsg+0x458/0x6d0
[ 334.962325] inet_sendmsg+0x50/0x80
[ 334.965805] sock_sendmsg+0x60/0x6c
[ 334.969286] __sys_sendto+0xc8/0x134
[ 334.972853] __arm64_sys_sendto+0x34/0x4c
[ 334.976854] invoke_syscall+0x78/0x100
[ 334.980594] el0_svc_common.constprop.0+0x4c/0xf4
[ 334.985287] do_el0_svc+0x38/0x4c
[ 334.988591] el0_svc+0x34/0x10c
[ 334.991724] el0t_64_sync_handler+0x11c/0x150
[ 334.996072] el0t_64_sync+0x190/0x194
[ 334.999726] Code: b9001062 f9403c02 d53cd044 8b040042 (b8210040)
[ 335.005810] ---[ end trace 0000000000000000 ]---
[ 335.010416] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[ 335.017279] SMP: stopping secondary CPUs
[ 335.021374] Kernel Offset: 0x5baca8eb0000 from 0xffff800008000000
[ 335.027456] PHYS_OFFSET: 0x80000000
[ 335.030932] CPU features: 0x0000,0085c029,19805c82
[ 335.035713] Memory Limit: none
[ 335.038756] Rebooting in 180 seconds..
The fix is to allocate the memory in bond_open() which is guaranteed
to be called before any packets are processed.
Fixes: 848ca9182a7d ("net: bonding: Use per-cpu rr_tx_counter")
CC: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit ece19502834d ("net: phy: micrel: 1588 support for LAN8814
phy") the handler always returns IRQ_HANDLED, except in an error case.
Before that commit, the interrupt status register was checked and if
it was empty, IRQ_NONE was returned. Restore that behavior to play nice
with the interrupt line being shared with others.
Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Divya Koppera <Divya.Koppera@microchip.com>
Link: https://lore.kernel.org/r/20220920141619.808117-1-michael@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
CMN-600 uses bits [27:0] for child node address offset while bits [30:28]
are required to be zero.
For CMN-650, the child node address offset field has been increased
to include bits [29:0] while leaving only bit 30 set to zero.
Let's include the missing two bits and assume older implementations
comply with the spec and set bits [29:28] to 0.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Fixes: 60d1504070c2 ("perf/arm-cmn: Support new IP features")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220808195455.79277-1-ilkka@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
domain_add_cpu() and domain_remove_cpu() need to kfree() the child
arrays that were allocated by domain_setup_ctrlval().
As this memory is moved around, and new arrays are created, adjusting
the error handling cleanup code becomes noisier.
To simplify this, move all the kfree() calls into a domain_free() helper.
This depends on struct rdt_hw_domain being kzalloc()d, allowing it to
unconditionally kfree() all the child arrays.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-5-james.morse@arm.com
|
|
Building without CONFIG_POWER_SUPPLY will fail:
drivers/usb/typec/anx7411.o: In function `anx7411_detect_power_mode':
anx7411.c:(.text+0x527): undefined reference to `power_supply_changed'
drivers/usb/typec/anx7411.o: In function `anx7411_psy_set_prop':
anx7411.c:(.text+0x90d): undefined reference to `power_supply_get_drvdata'
anx7411.c:(.text+0x930): undefined reference to `power_supply_changed'
drivers/usb/typec/anx7411.o: In function `anx7411_psy_get_prop':
anx7411.c:(.text+0x94d): undefined reference to `power_supply_get_drvdata'
drivers/usb/typec/anx7411.o: In function `anx7411_i2c_probe':
anx7411.c:(.text+0x111d): undefined reference to
`devm_power_supply_register'
drivers/usb/typec/anx7411.o: In function `anx7411_work_func':
anx7411.c:(.text+0x167c): undefined reference to `power_supply_changed'
anx7411.c:(.text+0x1b55): undefined reference to `power_supply_changed'
Add POWER_SUPPLY dependency to Kconfig.
Fixes: fe6d8a9c8e64 ("usb: typec: anx7411: Add Analogix PD ANX7411 support")
Reviewed-by: Xin Ji <xji@analogixsemi.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Link: https://lore.kernel.org/r/20220920084431.196258-1-renzhijie2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Because domains are exposed to user-space via resctrl, the filesystem
must update its state when CPU hotplug callbacks are triggered.
Some of this work is common to any architecture that would support
resctrl, but the work is tied up with the architecture code to
allocate the memory.
Move domain_setup_mon_state(), the monitor subdir creation call and the
mbm/limbo workers into a new resctrl_online_domain() call. These bits
are not specific to the architecture. Grouping them in one function
allows that code to be moved to /fs/ and re-used by another architecture.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-4-james.morse@arm.com
|
|
Lorenzo Bianconi says:
====================
Add WED support for MT7986 chipset
Similar to MT7622, introduce Wireless Ethernet Dispatch (WED) support
for MT7986 chipset in order to offload to the hw packet engine traffic
received from LAN/WAN device to WLAN nic (MT7915E).
====================
Link: https://lore.kernel.org/r/cover.1663668203.git.lorenzo@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce hw flow offload support for mt7986 chipset. PPE is not enabled
yet in mt7986 since mt76 support is not available yet.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Other than pcie bus, introduce support for axi bus to mtk wed driver.
Axi bus is used to connect mt7986-wmac soc chip available on mt7986
device.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce Wireless Etherne Dispatcher support on transmission side
for mt7986 chipset
Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
mtk_wed_dma_{enable/disable}
Introduce mtk_wed_configure_irq, mtk_wed_dma_enable and mtk_wed_dma_disable
utility routines.
This is a preliminary patch to introduce mt7986 wed support.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce foe_entry_size to mtk_eth_soc data structure since mt7986
relies on a bigger mtk_foe_entry data structure.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This is a preliminary patch to introduce mt7986 wed support.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
mt7986 chipset support multiple packet engines for wlan <-> eth
packet forwarding.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This is a preliminary patch to introduce mt7986 hw packet engine.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
register map
This is a preliminary patch to introduce mt7986 hw packet engine.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Document the binding for the Wireless Ethernet Dispatch core on the
MT7986 ethernet driver
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce wed0 and wed1 nodes in order to enable offloading forwarding
between ethernet and wireless devices on the mt7986 chipset.
Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add maintainers for Alibaba PMU document and driver
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220818031822.38415-4-xueshuai@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the DDR Sub-System Driveway Performance Monitoring Unit (PMU) driver
support for Alibaba T-Head Yitian 710 SoC chip. Yitian supports DDR5/4
DRAM and targets cloud computing and HPC.
Each PMU is registered as a device in /sys/bus/event_source/devices, and
users can select event to monitor in each sub-channel, independently. For
example, ali_drw_21000 and ali_drw_21080 are two PMU devices for two
sub-channels of the same channel in die 0. And the PMU device of die 1 is
prefixed with ali_drw_400XXXXX, e.g. ali_drw_40021000.
Due to hardware limitation, one of DDRSS Driveway PMU overflow interrupt
shares the same irq number with MPAM ERR_IRQ. To register DDRSS PMU and
MPAM drivers successfully, add IRQF_SHARED flag.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Co-developed-by: Hongbo Yao <yaohongbo@linux.alibaba.com>
Signed-off-by: Hongbo Yao <yaohongbo@linux.alibaba.com>
Co-developed-by: Neng Chen <nengchen@linux.alibaba.com>
Signed-off-by: Neng Chen <nengchen@linux.alibaba.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220818031822.38415-3-xueshuai@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Alibaba's T-Head SoC implements uncore PMU for performance and functional
debugging to facilitate system maintenance. Document it to provide guidance
on how to use it.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220914022326.88550-2-xueshuai@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
mon_enabled and mon_capable are always set as a pair by
rdt_get_mon_l3_config().
There is no point having two values.
Merge them together.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-3-james.morse@arm.com
|
|
rdt_resources_all[] used to have extra entries for L2CODE/L2DATA.
These were hidden from resctrl by the alloc_enabled value.
Now that the L2/L2CODE/L2DATA resources have been merged together,
alloc_enabled doesn't mean anything, it always has the same value as
alloc_capable which indicates allocation is supported by this resource.
Remove alloc_enabled and its helpers.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-2-james.morse@arm.com
|
|
IRQ trigger configuration is skipped if it has already been set before;
however, the IRQ line still needs to be OR'd to irq_enabled because
irq_enabled is reset for every events_configure call. This patch moves
the irq_enabled OR operation update to before the irq_trigger check so
that IRQ line enablement is not skipped.
Fixes: c95cc0d95702 ("counter: 104-quad-8: Fix persistent enabled events bug")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220815122301.2750-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/179eed11eaf225dbd908993b510df0c8f67b1230.1663844776.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Per discussion on the alsa-devel mailing list [1], the legacy PIN to PCM
device mapping is obsolete nowadays. The maximum number of the simultaneously
usable PCM devices is equal to the HDMI codec converters.
Remove the extra PCM devices (beyond the detected converters) and force
the use of the dynamic PCM device allocation. The legacy code is removed.
I believe that all HDMI codecs have the jack sensing feature. Move the check
to the codec probe function and print a warning, if a codec without this
feature is detected.
[1] https://lore.kernel.org/alsa-devel/2f37e0b2-1e82-8c0b-2bbd-1e5038d6ecc6@perex.cz/
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220922084017.25925-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
cpufreq_get_hw_max_freq() returns max frequency in kHz as *unsigned int*,
while freq_inv_set_max_ratio() gets passed this frequency in Hz as 'u64'.
Multiplying max frequency by 1000 can potentially result in overflow --
multiplying by 1000ULL instead should avoid that...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Fixes: cd0ed03a8903 ("arm64: use activity monitors for frequency invariance")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/01493d64-2bce-d968-86dc-11a122a9c07d@omp.ru
Signed-off-by: Will Deacon <will@kernel.org>
|
