summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-03ASoC: core: Allow topology to override machine driver FE DAI link config.Liam Girdwood
Machine drivers statically define a number of DAI links that currently cannot be changed or removed by topology. This means PCMs and platform components cannot be changed by topology at runtime AND machine drivers are tightly coupled to topology. This patch allows topology to override the machine driver DAI link config in order to reuse machine drivers with different topologies and platform components. The patch supports :- 1) create new FE PCMs with a topology defined PCM ID. 2) destroy existing static FE PCMs 3) change the platform component driver. 4) assign any new HW params fixups. 5) assign a new card name prefix to differentiate this topology to userspace. The patch requires no changes to the machine drivers, but does add some platform component flags that the platform component driver can assign before loading topologies. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: atmel-i2s: dt-bindings: Remove unnecessary phandle to aclkCodrin Ciubotariu
The optional clock phandle to aclk (Audio PLL clock) is no longer needed by the driver. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: atmel-i2s: Remove unnecessary audio PLL clock (aclk)Codrin Ciubotariu
The generated clock (gclk) driver is able to set aclk as its parent and change its rate alone, if needed. This means that our driver no longer needs to configure aclk and we can let gclk select and configure its clock source. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: es7134: add support for the es7154Jerome Brunet
Add support for the es7154 which is basically an es7134 with an embedded power amplifier and lower maximum sample rate Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: es7134: correct required power suppliesJerome Brunet
Drop AVDD in favor of PVDD to match the names used in the datasheet and only claim PVDD on the es7154. The es7134 and es7144 don't have a separate supply for the digital I/O. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: es7134: update DT binding with new compatible and suppliesJerome Brunet
Update the documentation to add support for the es7154 and optional power supplies phandles. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: AMD: Simplify trigger handlerDaniel Kurtz
Now that the I2S channel names are fixed, and DMA data flow order is consistent (ch1 then ch2), we can simplify channel start order: start the upstream channel and then the downstream channel for both playback and capture cases. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: AMD: Reset bytescount when starting transactionDaniel Kurtz
The pointer() callback gets its value by reading the I2S BYTE_COUNT register. This is a 64-bit runnning transaction counter. If a transaction was aborted in the middle of a sample buffer, the counter will stop counting on a number divisible by the buffer size. Since we actually use it as a pointer into an aligned buffer, however, we do want to ensure that it always starts at a number divisible by the buffer size when starting a transaction, hence we reset it whenever starting a transaction. To accomplish this, it wasn't necessary to zero bytescount at the termination of each transaction, so remove this unnecessary code. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: AMD: Do not generate interrups for every captured sampleDaniel Kurtz
On capture, audio data is first copied from I2S to ACP memory, and then from ACP to SYSRAM. The I2S_TO_ACP_DMA interrupt fires on every sample transferred from I2S to ACP memory. That is it fires ~48000 times per second when capturing @ 48 kHz. Since we don't do anything on this interrupt anyway, disable it to save quite a few unnecessary interrupts. The real "work" (calling snd_pcm_period_elapsed()) is done when transfer from ACP to SYSRAM is complete. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: AMD: Fix Capture DMA channel namesDaniel Kurtz
On capture, audio data is first copied from I2S to ACP memory, and then to SYSRAM. For each step the channel number increases, so the names in the driver were wrong. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: AMD: Always subtract bytescountDaniel Kurtz
It is always correct to subtract out the starting bytescount value. Even in the case of 2^64 byte rollover (292 Million Years in the future @ 48000 Hz) the math still works out. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: AMD: Always stop ch2 firstDaniel Kurtz
Commit 6b116dfb4633a ("ASoC: AMD: make channel 1 dma as circular") made both channels circular, so this comment and logic no longer applies. Always stop ch2 (the channel closest to the output) before ch1. This ensures that the downstream circular DMA channel does not continue to play/capture repeated samples after the upstream circular DMA channel has already stopped. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: pxa-ssp: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: es7241: add es7241 codec supportJerome Brunet
Add support for the everest es7241 which is a simple 2 channels analog to digital converter. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: es7241: add dt-bindings documentation for the es7241 adcJerome Brunet
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: rt5682: add button detection mode controlBard Liao
We are currently using power saving mode for button detection. However, it will impact the headset recording performance. This patch will switch button detection to normal mode in capture and switch to power saving mode in the end of capture. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ALSA: hda - Handle pm failure during hotplugChris Wilson
Obtaining the runtime pm wakeref can fail, especially in a hotplug scenario where i915.ko has been unloaded. If we do not catch the failure, we end up with an unbalanced pm. v2 additions by tiwai: hdmi_present_sense() checks the return value and handle only a negative error case and bails out only if it's really still suspended. Also, snd_hda_power_down() is called at the error path so that the refcount is balanced. Along with it, the spec->pcm_lock is taken outside hdmi_present_sense() in the caller side, so that it won't cause deadlock at reentrace via runtime resume. v3 fix by tiwai: Missing linux/pm_runtime.h is included. References: 222bde03881c ("ALSA: hda - Fix mutex deadlock at HDMI/DP hotplug") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-02ASoC: es7134: Add VDD and AVDD power suppliesJerome Brunet
Add the VDD and AVDD power supplies to the DAPM graph as some board may need to enable a regulator to turn them on. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: es7134: check if mclk rate is validJerome Brunet
For each supported sample rate, the es7134 can work with several mclk / sample rate ratio. Check if ratio we get is actually OK. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: es7134: remove 64kHz rate from the supported ratesJerome Brunet
64Khz is actually not supported by the es7134 according to the datasheet Fixes: 9000b59d7a12 ("ASoC: es7134: add es7134 DAC driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: pxa-ssp: remove .set_pll() and .set_clkdiv() callbacksDaniel Mack
The .set_pll() and .set_clkdiv() callbacks are considered legacy and should not be used anymore. In order to support PXA boards on DT platforms, remove them and let the code figure out the correct dividers and PLL base frequencies itself. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: pxa: select SND_PXA2XX_LIB for drivers that depend on itDaniel Mack
Commit d767d3ce5c48b ("ASoC: pxa: provide PCM ops for ssp, i2s and ac97 components") created a build-time dependency to SND_PXA2XX_LIB but missed to reflect that in Kconfig. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: ac97: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-generic-dmaengine-pcm: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-compress: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-topology: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-dapm: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-core: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-acpi: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-devres.c: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-utils.c: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-jack.c: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-dpcm.h: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-pcm.c: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-ops.c: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-dai.h: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-io.c: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: audio-graph-scu-card.c: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: audio-graph-card.c: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: simple-scu-card.c: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: simple-card-utils: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: simple-card: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: mt6797: sub dai use list_headKaiChieh Chuang
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: mediatek: sub dai use list_headKaiChieh Chuang
use list_head for sub_dais, since original sub_dais array is sparsely occupied Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa: make SND_PXA2XX_SOC_I2S selectableDaniel Mack
Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa: remove bindings from pxa2xx-pcmDaniel Mack
This platform is no longer needed on DT boards, so let's remove them to avoid confusion. DT bindings should use the CPU DAIs (I2S/SSP/AC97) directly. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa: provide PCM ops for ssp, i2s and ac97 componentsDaniel Mack
Now that the functions are now available through pxa2xx-lib, hook them up to pxa-sspi, pxa-ac97 and pxa-i2s. This allows DT platforms to use the DAIs without a platform driver. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa2xx-pcm-lib: fix indentingDaniel Mack
While at it, also fix some indenting. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa: move some functions to pxa2xx-libDaniel Mack
To get rid of some intermediate platform layers, move pxa2xx_soc_pcm_new() and pxa2xx_pcm_ops in pxa2xx-lib. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa: clean up function names in pxa2xx-libDaniel Mack
Clean up the namespace a bit and drop the __ prefix of all functions exported by pxa2xx-lib. This improves the readability of the code. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 16:35:18 +0000