summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-09-08rbd: fix double free on rbd_dev->header_nameIlya Dryomov
If rbd_dev_image_probe() in rbd_dev_probe_parent() fails, header_name is freed twice: once in rbd_dev_probe_parent() and then in its caller rbd_dev_image_probe() (rbd_dev_image_probe() is called recursively to handle parent images). rbd_dev_probe_parent() is responsible for probing the parent, so it shouldn't muck with clone's fields. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2015-09-08libceph: set 'exists' flag for newly up osdYan, Zheng
Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-09-08ceph: cleanup use of ceph_msg_getJianpeng Ma
Signed-off-by: Jianpeng Ma <jianpeng.ma@intel.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-09-08ceph: no need to get parent inode in ceph_openJianpeng Ma
parent inode is needed in creating new inode case. For ceph_open, the target inode already exists. Signed-off-by: Jianpeng Ma <jianpeng.ma@intel.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-09-08ceph: remove the useless judgementJianpeng Ma
err != 0 is already handled. So skip this. Signed-off-by: Jianpeng Ma <jianpeng.ma@intel.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-09-08ceph: remove redundant test of head->safe and silence static analysis warningsBrad Hubbard
Signed-off-by: Brad Hubbard <bhubbard@redhat.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-09-08ceph: fix queuing inode to mdsdir's snaprealmYan, Zheng
During MDS failovers, MClientSnap message may cause kclient to move some inodes from root directory's snaprealm to mdsdir's snaprealm and queue snapshots for these inodes. For a FS has never created any snapshot, both root directory's snaprealm and mdsdir's snaprealm share the same snapshot contexts (both are ceph_empty_snapc). This confuses ceph_put_wrbuffer_cap_refs(), make it unable to distinguish snapshot buffers from head buffers. The fix is do not use ceph_empty_snapc as snaprealm's cached context. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-09-08libceph: rename con_work() to ceph_con_workfn()Ilya Dryomov
Even though it's static, con_work(), being a work func, shows up in various stacktraces a lot. Prefix it with ceph_. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-09-08libceph: Avoid holding the zero page on ceph_msgr_slab_init errorsBenoît Canet
ceph_msgr_slab_init may fail due to a temporary ENOMEM. Delay a bit the initialization of zero_page in ceph_msgr_init and reorder its cleanup in _ceph_msgr_exit so it's done in reverse order of setup. BUG_ON() will not suffer to be postponed in case it is triggered. Signed-off-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-09-08libceph: remove the unused macro AES_KEY_SIZENicholas Krause
This removes the no longer used macro AES_KEY_SIZE as no functions use this macro anymore and thus this macro can be removed due it no longer being required. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-09-08ceph: invalidate dirty pages after forced umountYan, Zheng
After forced umount, ceph_writepages_start() skips flushing dirty pages. To make sure inode's reference count get dropped to zero, we need to invalidate dirty pages. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-09-08ceph: EIO all operations after forced umountYan, Zheng
This patch makes try_get_cap_refs() and __do_request() check if the file system was forced umount, and return -EIO if it was. This patch also adds a helper function to drops dirty caps and wakes up blocking operation. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-09-08Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "Highlights: - PKCS#7 support added to support signed kexec, also utilized for module signing. See comments in 3f1e1bea. ** NOTE: this requires linking against the OpenSSL library, which must be installed, e.g. the openssl-devel on Fedora ** - Smack - add IPv6 host labeling; ignore labels on kernel threads - support smack labeling mounts which use binary mount data - SELinux: - add ioctl whitelisting (see http://kernsec.org/files/lss2015/vanderstoep.pdf) - fix mprotect PROT_EXEC regression caused by mm change - Seccomp: - add ptrace options for suspend/resume" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (57 commits) PKCS#7: Add OIDs for sha224, sha284 and sha512 hash algos and use them Documentation/Changes: Now need OpenSSL devel packages for module signing scripts: add extract-cert and sign-file to .gitignore modsign: Handle signing key in source tree modsign: Use if_changed rule for extracting cert from module signing key Move certificate handling to its own directory sign-file: Fix warning about BIO_reset() return value PKCS#7: Add MODULE_LICENSE() to test module Smack - Fix build error with bringup unconfigured sign-file: Document dependency on OpenSSL devel libraries PKCS#7: Appropriately restrict authenticated attributes and content type KEYS: Add a name for PKEY_ID_PKCS7 PKCS#7: Improve and export the X.509 ASN.1 time object decoder modsign: Use extract-cert to process CONFIG_SYSTEM_TRUSTED_KEYS extract-cert: Cope with multiple X.509 certificates in a single file sign-file: Generate CMS message as signature instead of PKCS#7 PKCS#7: Support CMS messages also [RFC5652] X.509: Change recorded SKID & AKID to not include Subject or Issuer PKCS#7: Check content type and versions MAINTAINERS: The keyrings mailing list has moved ...
2015-09-08Merge branch 'nmi' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull NMI backtrace update from Russell King: "These changes convert the x86 NMI handling to be a library implementation which other architectures can make use of. Thomas Gleixner has reviewed and tested these changes, and wishes me to send these rather than taking them through the tip tree. The final patch in the set adds an initial implementation using this infrastructure to ARM, even though it doesn't send the IPI at "NMI" level. Patches are in progress to add the ARM equivalent of NMI, but we still need the IRQ-level fallback for systems where the "NMI" isn't available due to secure firmware denying access to it" * 'nmi' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: add basic support for on-demand backtrace of other CPUs nmi: x86: convert to generic nmi handler nmi: create generic NMI backtrace implementation
2015-09-08Merge tag 'for-linus-4.3-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: "Xen features and fixes for 4.3: - Convert xen-blkfront to the multiqueue API - [arm] Support binding event channels to different VCPUs. - [x86] Support > 512 GiB in a PV guests (off by default as such a guest cannot be migrated with the current toolstack). - [x86] PMU support for PV dom0 (limited support for using perf with Xen and other guests)" * tag 'for-linus-4.3-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (33 commits) xen: switch extra memory accounting to use pfns xen: limit memory to architectural maximum xen: avoid another early crash of memory limited dom0 xen: avoid early crash of memory limited dom0 arm/xen: Remove helpers which are PV specific xen/x86: Don't try to set PCE bit in CR4 xen/PMU: PMU emulation code xen/PMU: Intercept PMU-related MSR and APIC accesses xen/PMU: Describe vendor-specific PMU registers xen/PMU: Initialization code for Xen PMU xen/PMU: Sysfs interface for setting Xen PMU mode xen: xensyms support xen: remove no longer needed p2m.h xen: allow more than 512 GB of RAM for 64 bit pv-domains xen: move p2m list if conflicting with e820 map xen: add explicit memblock_reserve() calls for special pages mm: provide early_memremap_ro to establish read-only mapping xen: check for initrd conflicting with e820 map xen: check pre-allocated page tables for conflict with memory map xen: check for kernel memory conflicting with memory layout ...
2015-09-08Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more irq updates from Thomas Gleixner: "The second part of irq related updates: - Provide EOImode for GIC[V3] irq chips, which is a prerequisite for direct interrupt handling in [KVM] guests" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/GIC: Fix EOImode setting for non-DT/ACPI systems irqchip/GIC: Don't deactivate interrupts forwarded to a guest irqchip/GIC: Convert to EOImode == 1 irqchip/GICv3: Don't deactivate interrupts forwarded to a guest irqchip/GICv3: Convert to EOImode == 1
2015-09-08Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68k/colfire fixes from Greg Ungerer: "Only a couple of patches this time. One migrating the clock driver code to the new set-state interface. The other cleaning up to use the PFN_DOWN macro" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k/coldfire: use PFN_DOWN macro m68k/coldfire/pit: Migrate to new 'set-state' interface
2015-09-08Merge tag 'ecryptfs-4.3-rc1-stale-dcache' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull ecryptfs fixes from Tyler Hicks: "Invalidate stale eCryptfs dcache entries caused by unlinked lower inodes" * tag 'ecryptfs-4.3-rc1-stale-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: Delete a check before the function call "key_put" eCryptfs: Invalidate dcache entries when lower i_nlink is zero
2015-09-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto fix from Herbert Xu: "This fixes a memory corruption bug in ghash-clmulni-intel due to insufficient memory allocation" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ghash-clmulni: specify context size for ghash async algorithm
2015-09-08userfaultfd: selftest: update userfaultfd x86 32bit syscall numberAndrea Arcangeli
It changed as result of other syscalls, and while the system call list itself was correctly updated, the selftest program was not. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08xen/xenbus: Rename the variable xen_store_mfn to xen_store_gfnJulien Grall
The variable xen_store_mfn is effectively storing a GFN and not an MFN. Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08xen/privcmd: Further s/MFN/GFN/ clean-upJulien Grall
The privcmd code is mixing the usage of GFN and MFN within the same functions which make the code difficult to understand when you only work with auto-translated guests. The privcmd driver is only dealing with GFN so replace all the mention of MFN into GFN. The ioctl structure used to map foreign change has been left unchanged given that the userspace is using it. Nonetheless, add a comment to explain the expected value within the "mfn" field. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08hvc/xen: Further s/MFN/GFN clean-upJulien Grall
HVM_PARAM_CONSOLE_PFN is used to retrieved the console PFN for HVM guest. It returns a PFN (aka GFN) and not a MFN. Furthermore, use directly virt_to_gfn for both PV and HVM domain rather than doing a special case for each of the them. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08video/xen-fbfront: Further s/MFN/GFN clean-upJulien Grall
The PV driver xen-fbfront is only dealing with GFN and not MFN. Rename all the occurence of MFN to GFN. Also take the opportunity to replace to usage of pfn_to_gfn by xen_page_to_gfn. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08xen/tmem: Use xen_page_to_gfn rather than pfn_to_gfnJulien Grall
All the caller of xen_tmem_{get,put}_page have a struct page * in hand and call pfn_to_gfn for the only benefits of these 2 functions. Rather than passing the pfn in parameter, pass directly the page and use directly xen_page_to_gfn. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08xen: Use correctly the Xen memory terminologiesJulien Grall
Based on include/xen/mm.h [1], Linux is mistakenly using MFN when GFN is meant, I suspect this is because the first support for Xen was for PV. This resulted in some misimplementation of helpers on ARM and confused developers about the expected behavior. For instance, with pfn_to_mfn, we expect to get an MFN based on the name. Although, if we look at the implementation on x86, it's returning a GFN. For clarity and avoid new confusion, replace any reference to mfn with gfn in any helpers used by PV drivers. The x86 code will still keep some reference of pfn_to_mfn which may be used by all kind of guests No changes as been made in the hypercall field, even though they may be invalid, in order to keep the same as the defintion in xen repo. Note that page_to_mfn has been renamed to xen_page_to_gfn to avoid a name to close to the KVM function gfn_to_page. Take also the opportunity to simplify simple construction such as pfn_to_mfn(page_to_pfn(page)) into xen_page_to_gfn. More complex clean up will come in follow-up patches. [1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=e758ed14f390342513405dd766e874934573e6cb Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08arm/xen: implement correctly pfn_to_mfnJulien Grall
After the commit introducing convertion between DMA and guest addresses, all the callers of pfn_to_mfn are expecting to get a GFN (Guest Frame Number). On ARM, all the guests are auto-translated so the GFN is equal to the Linux PFN (Pseudo-physical Frame Number). The current implementation may return an MFN if the caller is passing a PFN associated to a mapped foreign grant. In pratice, I haven't seen the problem on running guest but we should fix it for the sake of correctness. Correct the implementation by always returning the pfn passed in parameter. A follow-up patch will take care to rename pfn_to_mfn to a suitable name. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08xen: Make clear that swiotlb and biomerge are dealing with DMA addressJulien Grall
The swiotlb is required when programming a DMA address on ARM when a device is not protected by an IOMMU. In this case, the DMA address should always be equal to the machine address. For DOM0 memory, Xen ensure it by have an identity mapping between the guest address and host address. However, when mapping a foreign grant reference, the 1:1 model doesn't work. For ARM guest, most of the callers of pfn_to_mfn expects to get a GFN (Guest Frame Number), i.e a PFN (Page Frame Number) from the Linux point of view given that all ARM guest are auto-translated. Even though the name pfn_to_mfn is misleading, we need to ensure that those caller get a GFN and not by mistake a MFN. In pratical, I haven't seen error related to this but we should fix it for the sake of correctness. In order to fix the implementation of pfn_to_mfn on ARM in a follow-up patch, we have to introduce new helpers to return the DMA from a PFN and the invert. On x86, the new helpers will be an alias of pfn_to_mfn and mfn_to_pfn. The helpers will be used in swiotlb and xen_biovec_phys_mergeable. This is necessary in the latter because we have to ensure that the biovec code will not try to merge a biovec using foreign page and another using Linux memory. Lastly, the helper mfn_to_local_pfn has been renamed to bfn_to_local_pfn given that the only usage was in swiotlb. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08parisc: Use platform_device_register_simple("rtc-generic")Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2015-09-08parisc: Drop CONFIG_SMP around update_cr16_clocksource()Helge Deller
No need to use CONFIG_SMP around update_cr16_clocksource(). It checks for num_online_cpus() beeing greater than 1, which is always 1 in UP builds. Signed-off-by: Helge Deller <deller@gmx.de>
2015-09-08xen: switch extra memory accounting to use pfnsJuergen Gross
Instead of using physical addresses for accounting of extra memory areas available for ballooning switch to pfns as this is much less error prone regarding partial pages. Reported-by: Roger Pau Monné <roger.pau@citrix.com> Tested-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08xen: limit memory to architectural maximumJuergen Gross
When a pv-domain (including dom0) is started it tries to size it's p2m list according to the maximum possible memory amount it ever can achieve. Limit the initial maximum memory size to the architectural limit of the hardware in order to avoid overflows during remapping of memory. This problem will occur when dom0 is started with an initial memory size being a multiple of 1GB, but without specifying it's maximum memory size. The kernel must be configured without CONFIG_XEN_BALLOON_MEMORY_HOTPLUG for the problem to happen. Reported-by: Roger Pau Monné <roger.pau@citrix.com> Tested-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08xen: avoid another early crash of memory limited dom0Juergen Gross
Commit b1c9f169047b ("xen: split counting of extra memory pages...") introduced an error when dom0 was started with limited memory occurring only on some hardware. The problem arises in case dom0 is started with initial memory and maximum memory being the same. The kernel must be configured without CONFIG_XEN_BALLOON_MEMORY_HOTPLUG for the problem to happen. If all of this is true and the E820 map of the machine is sparse (some areas are not covered) then the machine might crash early in the boot process. An example E820 map triggering the problem looks like this: [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf7fafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf7fb000-0x00000000cf95ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf960000-0x00000000cfb62fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfb63000-0x00000000cfd14fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfd15000-0x00000000cfd61fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfd62000-0x00000000cfd6cfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfd6d000-0x00000000cfd6ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfd70000-0x00000000cfd70fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfd71000-0x00000000cfea8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cfea9000-0x00000000cfeb9fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfeba000-0x00000000cfecafff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cfecb000-0x00000000cfecbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfecc000-0x00000000cfedbfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cfedc000-0x00000000cfedcfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfedd000-0x00000000cfeddfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cfede000-0x00000000cfee3fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfee4000-0x00000000cfef6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cfef7000-0x00000000cfefffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000020effffff] usable In this case the area a0000-dffff isn't present in the map. This will confuse the memory setup of the domain when remapping the memory from such holes to populated areas. To avoid the problem the accounting of to be remapped memory has to count such holes in the E820 map as well. Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08xen: avoid early crash of memory limited dom0Juergen Gross
Commit b1c9f169047b ("xen: split counting of extra memory pages...") introduced an error when dom0 was started with limited memory. The problem arises in case dom0 is started with initial memory and maximum memory being the same and exactly a multiple of 1 GB. The kernel must be configured without CONFIG_XEN_BALLOON_MEMORY_HOTPLUG for the problem to happen. In this case it will crash very early during boot due to the virtual mapped p2m list not being large enough to be able to remap any memory: (XEN) Freed 304kB init memory. mapping kernel into physical memory about to get started... (XEN) traps.c:459:d0v0 Unhandled invalid opcode fault/trap [#6] on VCPU 0 [ec=0000] (XEN) domain_crash_sync called from entry.S: fault at ffff82d080229a93 create_bounce_frame+0x12b/0x13a (XEN) Domain 0 (vcpu#0) crashed on cpu#0: (XEN) ----[ Xen-4.5.2-pre x86_64 debug=n Not tainted ]---- (XEN) CPU: 0 (XEN) RIP: e033:[<ffffffff81d120cb>] (XEN) RFLAGS: 0000000000000206 EM: 1 CONTEXT: pv guest (d0v0) (XEN) rax: ffffffff81db2000 rbx: 000000004d000000 rcx: 0000000000000000 (XEN) rdx: 000000004d000000 rsi: 0000000000063000 rdi: 000000004d063000 (XEN) rbp: ffffffff81c03d78 rsp: ffffffff81c03d28 r8: 0000000000023000 (XEN) r9: 00000001040ff000 r10: 0000000000007ff0 r11: 0000000000000000 (XEN) r12: 0000000000063000 r13: 000000000004d000 r14: 0000000000000063 (XEN) r15: 0000000000000063 cr0: 0000000080050033 cr4: 00000000000006f0 (XEN) cr3: 0000000105c0f000 cr2: ffffc90000268000 (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e02b cs: e033 (XEN) Guest stack trace from rsp=ffffffff81c03d28: (XEN) 0000000000000000 0000000000000000 ffffffff81d120cb 000000010000e030 (XEN) 0000000000010006 ffffffff81c03d68 000000000000e02b ffffffffffffffff (XEN) 0000000000000063 000000000004d063 ffffffff81c03de8 ffffffff81d130a7 (XEN) ffffffff81c03de8 000000000004d000 00000001040ff000 0000000000105db1 (XEN) 00000001040ff001 000000000004d062 ffff8800092d6ff8 0000000002027000 (XEN) ffff8800094d8340 ffff8800092d6ff8 00003ffffffff000 ffff8800092d7ff8 (XEN) ffffffff81c03e48 ffffffff81d13c43 ffff8800094d8000 ffff8800094d9000 (XEN) 0000000000000000 ffff8800092d6000 00000000092d6000 000000004cfbf000 (XEN) 00000000092d6000 00000000052d5442 0000000000000000 0000000000000000 (XEN) ffffffff81c03ed8 ffffffff81d185c1 0000000000000000 0000000000000000 (XEN) ffffffff81c03e78 ffffffff810f8ca4 ffffffff81c03ed8 ffffffff8171a15d (XEN) 0000000000000010 ffffffff81c03ee8 0000000000000000 0000000000000000 (XEN) ffffffff81f0e402 ffffffffffffffff ffffffff81dae900 0000000000000000 (XEN) 0000000000000000 0000000000000000 ffffffff81c03f28 ffffffff81d0cf0f (XEN) 0000000000000000 0000000000000000 0000000000000000 ffffffff81db82e0 (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 (XEN) ffffffff81c03f38 ffffffff81d0c603 ffffffff81c03ff8 ffffffff81d11c86 (XEN) 0300000100000032 0000000000000005 0000000000000020 0000000000000000 (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 (XEN) Domain 0 crashed: rebooting machine in 5 seconds. This can be avoided by allocating aneough space for the p2m to cover the maximum memory of dom0 plus the identity mapped holes required for PCI space, BIOS etc. Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08parisc: Use double word condition in 64bit CAS operationJohn David Anglin
The attached change fixes the condition used in the "sub" instruction. A double word comparison is needed. This fixes the 64-bit LWS CAS operation on 64-bit kernels. I can now enable 64-bit atomic support in GCC. Cc: <stable@vger.kernel.org> Signed-off-by: John David Anglin <dave.anglin> Signed-off-by: Helge Deller <deller@gmx.de>
2015-09-08parisc: Filter out spurious interrupts in PA-RISC irq handlerHelge Deller
When detecting a serial port on newer PA-RISC machines (with iosapic) we have a long way to go to find the right IRQ line, registering it, then registering the serial port and the irq handler for the serial port. During this phase spurious interrupts for the serial port may happen which then crashes the kernel because the action handler might not have been set up yet. So, basically it's a race condition between the serial port hardware and the CPU which sets up the necessary fields in the irq sructs. The main reason for this race is, that we unmask the serial port irqs too early without having set up everything properly before (which isn't easily possible because we need the IRQ number to register the serial ports). This patch is a work-around for this problem. It adds checks to the CPU irq handler to verify if the IRQ action field has been initialized already. If not, we just skip this interrupt (which isn't critical for a serial port at bootup). The real fix would probably involve rewriting all PA-RISC specific IRQ code (for CPU, IOSAPIC, GSC and EISA) to use IRQ domains with proper parenting of the irq chips and proper irq enabling along this line. This bug has been in the PA-RISC port since the beginning, but the crashes happened very rarely with currently used hardware. But on the latest machine which I bought (a C8000 workstation), which uses the fastest CPUs (4 x PA8900, 1GHz) and which has the largest possible L1 cache size (64MB each), the kernel crashed at every boot because of this race. So, without this patch the machine would currently be unuseable. For the record, here is the flow logic: 1. serial_init_chip() in 8250_gsc.c calls iosapic_serial_irq(). 2. iosapic_serial_irq() calls txn_alloc_irq() to find the irq. 3. iosapic_serial_irq() calls cpu_claim_irq() to register the CPU irq 4. cpu_claim_irq() unmasks the CPU irq (which it shouldn't!) 5. serial_init_chip() then registers the 8250 port. Problems: - In step 4 the CPU irq shouldn't have been registered yet, but after step 5 - If serial irq happens between 4 and 5 have finished, the kernel will crash Signed-off-by: Helge Deller <deller@gmx.de>
2015-09-08parisc: Additionally check for in_atomic() in page fault handlerHelge Deller
Craig Estey noticed that we didn't checked for in_atomic() in our page fault handler like other architectures. This commit adds this check by using faulthandler_disabled() which includes a check for pagefault_disabled() and in_atomic(). Reported-by: Craig Estey <cae370@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2015-09-08PCI,parisc: Enable 64-bit bus addresses on PA-RISCHelge Deller
Commit 3a9ad0b ("PCI: Add pci_bus_addr_t") unconditionally introduced usage of 64-bit PCI bus addresses on all 64-bit platforms which broke PA-RISC. It turned out that due to enabling the 64-bit addresses, the PCI logic decided to use the GMMIO instead of the LMMIO region. This commit simply disables registering the GMMIO and thus we fall back to use the LMMIO region as before. Reverts commit 45ea2a5fed6dacb9bb0558d8b21eacc1c45d5bb4 ("PCI: Don't use 64-bit bus addresses on PA-RISC") To: linux-parisc@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Meelis Roos <mroos@linux.ee> Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: Helge Deller <deller@gmx.de>
2015-09-08parisc: Define ioremap_uc and ioremap_wcGuenter Roeck
Commit 3cc2dac5be3f ("drivers/video/fbdev/atyfb: Replace MTRR UC hole with strong UC") introduces calls to ioremap_wc and ioremap_uc. This causes build failures with parisc:allmodconfig. Map the missing functions to ioremap_nocache. Fixes: 3cc2dac5be3f ("drivers/video/fbdev/atyfb: Replace MTRR UC hole with strong UC") Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Helge Deller <deller@gmx.de>
2015-09-08drm/i915: Fix broken mst get_hw_state.Maarten Lankhorst
connector->encoder is initialized as NULL. Fix this by setting it in during pre enable. MST connectors are not read out during initial hw readout, and have no fixed encoder mappings. So it's harmless to return false when the connector has never been assigned to an encoder. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-08virtio_balloon: do not change memory amount visible via /proc/meminfoDenis V. Lunev
Balloon device is frequently used as a mean of cooperative memory control in between guest and host to manage memory overcommitment. This is the typical case for any hosting workload when KVM guest is provided for end-user. Though there is a problem in this setup. The end-user and hosting provider have signed SLA agreement in which some amount of memory is guaranted for the guest. The good thing is that this memory will be given to the guest when the guest will really need it (f.e. with OOM in guest and with VIRTIO_BALLOON_F_DEFLATE_ON_OOM configuration flag set). The bad thing is that end-user does not know this. Balloon by default reduce the amount of memory exposed to the end-user each time when the page is stolen from guest or returned back by using adjust_managed_page_count and thus /proc/meminfo shows reduced amount of memory. Fortunately the solution is simple, we should just avoid to call adjust_managed_page_count with VIRTIO_BALLOON_F_DEFLATE_ON_OOM set. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-08virtio_ballon: change stub of release_pages_by_pfnDenis V. Lunev
and rename it to release_pages_balloon. The function originally takes arrays of pfns and now it takes pointer to struct virtio_ballon. This change is necessary to conditionally call adjust_managed_page_count in the next patch. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-08virtio-blk: Allow extended partitionsFam Zheng
This will allow up to DISK_MAX_PARTS (256) partitions, with for example GPT in the guest. Otherwise, the partition scan code will only discover the first 15 partitions. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-08virtio_mmio: add ACPI probingGraeme Gregory
Added the match table and pointers for ACPI probing to the driver. This uses the same identifier for virt devices as being used for qemu ARM64 ACPI support. http://git.linaro.org/people/shannon.zhao/qemu.git/commit/d0bf1955a3ecbab4b51d46f8c5dda02b7e14a17e Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-08virtio-blk: use VIRTIO_BLK_F_WCE and VIRTIO_BLK_F_CONFIG_WCE in virtio1Paolo Bonzini
VIRTIO_BLK_F_CONFIG_WCE is important in order to achieve good performance (up to 2x, though more realistically +30-40%) in latency-bound workloads. However, it was removed by mistake together with VIRTIO_BLK_F_FLUSH. It will be restored in the next revision of the virtio 1.0 standard, so do the same in Linux. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-08nios2: add Max10 defconfigChee Nouk Phoon
Max10 is a FPGA device. This patch adds defconfig based on Max10 hardware reference design. Design is intended to run on Max10 development kit. Signed-off-by: Chee Nouk Phoon <cnphoon@altera.com> Signed-off-by: Ley Foon Tan <lftan@altera.com>
2015-09-08nios2: Add Max10 device treeChee Nouk Phoon
Max10 is a FPGA device. This patch adds Nios2 support for Max10. This device tree is based on Max10 hardware reference design. Signed-off-by: Chee Nouk Phoon <cnphoon@altera.com> Signed-off-by: Ley Foon Tan <lftan@altera.com>
2015-09-08kvm: irqchip: fix memory leakSudip Mukherjee
We were taking the exit path after checking ue->flags and return value of setup_routing_entry(), but 'e' was not freed incase of a failure. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-08kvm: move new trace event outside #ifdef CONFIG_KVM_ASYNC_PFWanpeng Li
Fixes compilation with ppc64_defconfig. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-08locking/static_keys: Fix a silly typoJonathan Corbet
Commit: 412758cb2670 ("jump label, locking/static_keys: Update docs") introduced a typo that might as well get fixed. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150907131803.54c027e1@lwn.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 11:53:34 +0000