summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-30HID: wiimote: add pro-controller analog stick calibrationDavid Herrmann
The analog sticks of the pro-controller might report slightly off values. To guarantee a uniform setup, we now calibrate analog-stick values during pro-controller setup. Unfortunately, the pro-controller fails during normal EEPROM reads and I couldn't figure out whether there are any calibration values stored on the device. Therefore, we now use the first values reported by the device (iff they are not _way_ off, which would indicate movement) to initialize the calibration values. To allow users to change this calibration data, we provide a pro_calib sysfs attribute. We also change the "flat" values so user-space correctly smoothes our data. It makes slightly off zero-positions less visible while still guaranteeing highly precise movement reports. Note that the pro controller reports zero-positions in a quite huge range (at least: -100 to +100). Reported-by: Rafael Brune <mail@rbrune.de> Tested-by: Rafael Brune <mail@rbrune.de> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-30HID: wiimote: fix inverted pro-controller axesDavid Herrmann
The analog-stick vertical axes are inverted. Fix that! Otherwise, games and other gamepad applications need to carry their own fixups (which they thankfully haven't done, yet). Cc: <stable@vger.kernel.org> # 3.11+ Reported-by: Rafael Brune <mail@rbrune.de> Tested-by: Rafael Brune <mail@rbrune.de> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-30ARM64: DT: define ARM64 specific arch_match_cpu_phys_idSudeep KarkadaNagesha
OF/DT core library provides architecture specific hook to match the logical cpu index with the corresponding physical identifier. On ARM64, the MPIDR_EL1 contains specific bitfields(MPIDR_EL1.Aff{3..0}) which uniquely identify a CPU, in addition to some non-identifying information and reserved bits. The ARM cpu binding defines the 'reg' property to only contain the affinity bits, and any cpu nodes with other bits set in their 'reg' entry are skipped. This patch overrides the weak definition of arch_match_cpu_phys_id with ARM64 specific version using MPIDR_EL1.Aff{3..0} as cpu physical identifiers. Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-30arm64: allow ioremap_cache() to use existing RAM mappingsMark Salter
Some drivers (ACPI notably) use ioremap_cache() to map an area which could either be outside of kernel RAM or in an already mapped reserved area of RAM. To avoid aliases with different caching attributes, ioremap() does not allow RAM to be remapped. But for ioremap_cache(), the existing kernel mapping may be used. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-30ext4: change ext4_read_inline_dir() to return 0 on successBoxiLiu
In ext4_read_inline_dir(), if there is inline data, the successful return value is the return value of ext4_read_inline_data(). Howewer, this is used by ext4_readdir(), and while it seems harmless to return a positive value on success, it's inconsistent, since historically we've always return 0 on success. Signed-off-by: BoxiLiu <lewis.liulei@huawei.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Acked-by: Tao Ma <boyu.mt@taobao.com>
2013-10-30video: exynos_mipi_dsi: Unlock the mutex before returningSachin Kamat
Mutex should be unlocked before returning. Fixes mutex lock-unlock imbalance issue. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-30video: da8xx-fb: remove unwanted defineManish Badarkhe
Remove unwanted define "WSI_TIMEOUT" present in code. Signed-off-by: Manish Badarkhe <badarkhe.manish@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-30video: Remove unnecessary semicolonsJoe Perches
These aren't necessary after switch, for, and if blocks. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-30ALSA: hda - Add a fixup for ASUS N76VZTakashi Iwai
ASUS N76VZ needs the same fixup as N56VZ for supporting the boost speaker. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=846529 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-30ext4: pair trace_ext4_writepages & trace_ext4_writepages_resultMing Lei
Pair the two trace events to make troubeshooting writepages easier, and it should be more convinient to write a simple script to parse the traces. Cc: linux-ext4@vger.kernel.org Cc: Jan Kara <jack@suse.cz> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-10-30ACPICA: Hardcode access width for the reset register.Bob Moore
The ACPI spec requires the reset register width to be 8, so we now hardcode it and ignore the FADT value. This provides/maintains compatibility with other ACPI implementations that have allowed BIOS code with bad register width values to go unnoticed. Matthew Garett, Bob Moore, Lv Zheng. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30ACPICA: Fix possible memory leaks in the GPE handling.Lv Zheng
This change fixes potential memory leaks in the error paths of the GPE handling code. Lv Zheng. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30ACPICA: Predefine name macros: Sort list.Bob Moore
Sort the method names in acnames.h. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30ACPICA: Cleanup memory allocation macros and configurability.Lv Zheng
In the common case, the ACPI_ALLOCATE and related macros now resolve directly to their respective acpi_os* OSL interfaces. Two options: 1) The ACPI_ALLOCATE_ZEROED macro defaults to a simple local implementation by default, unless overridden by the USE_NATIVE_ALLOCATE_ZEROED define. 2) For ACPI execution simulation environment (AcpiExec) which is not shipped with the Linux kernel, the macros can optionally be resolved to the local interfaces that track each allocation (used to immediately detect memory leaks). Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30ACPICA: Add safe versions of common string functions.Bob Moore
This change adds and deploys "safe" versions of strcpy and strcat that ensure that the target buffer does not overflow. These safe functions are only helpful for processing user input and command lines. For most ACPICA code however, the required buffer length is precisely calculated before buffer allocation, so the use of these functions is unnecessary. ACPICA BZ 1043. This change only applies to the ACPICA utilities and the debugger, none of which are not shipped with the kernel yet, so the kernel's behavior remains unchanged after it. References: https://bugs.acpica.org/show_bug.cgi?id=1043 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30ACPICA: Fix a macro for the hardware-reduced caseBob Moore
This fix repairs a version of a macro that is used for the hardware reduced case only. It adds a return statement to the macro definition so that the translation into the Linux kernel source will not completely delete the second line of the macro because it thinks that it is an empty block. It actually clarifies the use of the macro anyway. Reported-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30ACPICA: Add history/line-editing for Unix/Linux systems.Bob Moore
The original upstream ACPICA change added full history and limited line editing to the debugger: This change adds full history and limited line editing for Unix and Linux systems. It does not use readline() because of portability issues. Instead it uses the POSIX termio interface to put the terminal in raw input mode so that the various special keys can be trapped (such as up-arrow and down-arrow for history support). Since the debugger is not shipped in the kernel, it only is necessary to update one header file to keep the kernel source in sync with the upstream. [rjw: Changelog] Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30ACPICA: Add a check for a null node during namespace walk.Bob Moore
Mostly for consistency. ACPICA BZ 1042. Actually, currently no one is experiencing problem without this check as the obj_handle is guaranteed to be valid. References: https://bugs.acpica.org/show_bug.cgi?id=1042 Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30ACPICA: Table print header function: Increase default width for table length.Bob Moore
This change increases the default width for the length of tables from 5 to 6, to improve alignment/readability on systems with large tables. These are being seen more frequently, especially large DSDTs (greater than 1 MB). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30ACPICA: Ensure that debug output is immediately disabled on termination.Tomasz Nowicki
Set the global debug flag to "no output" when the debugger is shutdown. ACPICA BZ 1011. Tomasz Nowicki. Since the debugger is not shipped in the Linux kernel upstream, this change doesn't affect Linux kernel's behavior. References: https://bugs.acpica.org/show_bug.cgi?id=1011 Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30KVM: use a more sensible error number when debugfs directory creation failsPaolo Bonzini
I don't know if this was due to cut and paste, or somebody was really using a D20 to pick the error code for kvm_init_debugfs as suggested by Linus (EFAULT is 14, so the possibility cannot be entirely ruled out). In any case, this patch fixes it. Reported-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-30KVM: Fix modprobe failure for kvm_intel/kvm_amdTim Gardner
The x86 specific kvm init creates a new conflicting debugfs directory which causes modprobe issues with kvm_intel and kvm_amd. For example, sudo modprobe kvm_amd modprobe: ERROR: could not insert 'kvm_amd': Bad address The simplest fix is to just rename the directory. The following KVM config options are set: CONFIG_KVM_GUEST=y CONFIG_KVM_DEBUG_FS=y CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_HAVE_KVM_IRQ_ROUTING=y CONFIG_HAVE_KVM_EVENTFD=y CONFIG_KVM_APIC_ARCHITECTURE=y CONFIG_KVM_MMIO=y CONFIG_KVM_ASYNC_PF=y CONFIG_HAVE_KVM_MSI=y CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y CONFIG_KVM=m CONFIG_KVM_INTEL=m CONFIG_KVM_AMD=m CONFIG_KVM_DEVICE_ASSIGNMENT=y Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> [Change debugfs directory name. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-30simplefb: use write-combined remappingDavid Herrmann
Framebuffers shouldn't be cached and it is usually very uncommon to read them. Therefore, use ioremap_wc() to get significant speed improvements on systems which provide it. On all other systems it's aliased to ioremap_nocache() which is also fine. Reported-by: Tom Gundersen <teg@jklm.no> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Tested-by: Tom Gundersen <teg@jklm.no> Tested-by: Alexandre Courbot <acourbot@nvidia.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-30simplefb: fix unmapping fb during destructionDavid Herrmann
Unfortunately, fbdev does not create its own "struct device" for framebuffers. Instead, it attaches to the device of the parent layer. This has the side-effect that devm_* managed resources are not cleaned up on framebuffer-destruction but rather during destruction of the parent-device. In case of fbdev this might be too late, though. remove_conflicting_framebuffer() may remove fbdev devices but keep the parent device as it is. Therefore, we now use plain ioremap() and unmap the framebuffer in the fb_destroy() callback. Note that we must not free the device here as this might race with the parent-device removal. Instead, we rely on unregister_framebuffer() as barrier and we're safe. Reported-by: Tom Gundersen <teg@jklm.no> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-30drm/i915: refactor ilk display interrupt handlingDaniel Vetter
- Use a for_each_loop and add the corresponding #defines. - Drop the _ILK postfix on the existing DE_PIPE_VBLANK macro for consistency with everything else. - Also use macros (and add the missing one for plane flips) for the ivb display interrupt handler. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Drop the useless parens that Ville spotted.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-30drm/i915: use enum pipe consistently in i915_irq.cDaniel Vetter
Request by Ville in his review of the CRC stuff. This converts everything but ilk_display_irq_handler since that needs a bit more than a simple search&replace to look nice. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-30drm/i915: Capture batchbuffer state upon GPU hangChris Wilson
The bbstate contains useful bits of debugging information such as whether the batch is being read from GTT or PPGTT, or whether it is allowed to execute privileged instructions. v2: Only record BB_STATE for gen4+ Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-30drm/i915: handle faked missed interrupts as simulated hangs, tooDaniel Vetter
Otherwise QA will report this as a real hang when running igt ZZ_missed_irq. v2: Actually test the right stuff and really shut up the DRM_ERROR output ... Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70747 Tested-by: lu hua <huax.lu@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-30ALSA: hda - Disable AA-loopback on ALC283 ChromebookTakashi Iwai
ALC283-based Chromebook suffers from occasional white noise, and it turned out that this comes from AA-loopback. Disable this output path by just clearing mixer_nid, then the generic parser will skip the creation of AA-loopback path. Reported-and-tested-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-29ARM: bcm_defconfig: Run "make savedefconfig"Tim Kryger
Several of the options in bcm_defconfig have gotten out of date so regenerate it with "make savedefconfig" to keep things fresh. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org>
2013-10-29ARM: bcm281xx: Add ARCH Timers to configChristian Daudt
Add HAVE_ARM_ARCH_TIMER to Broadcom Kconfig as it is required for some Mobile SoCs. Signed-off-by: Christian Daudt <bcm@fixthebug.org> Reviewed-by: Markus Mayer <mmayer@broadcom.com> Reviewed-by: Mark Hambleton <mahamble@broadcom.com> Reviewed-by: James King <jamesk@broadcom.com>
2013-10-29rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm)Christian Daudt
Currently ARCH_BCM has been used for Broadcom Mobile V7 based SoCs. In order to allow other Broadcom SoCs to also use mach-bcm directory and files, this patch renames the original ARCH_BCM to ARCH_BCM_MOBILE, and uses ARCH_BCM to define any Broadcom chip residing in mach-bcm directory. Signed-off-by: Christian Daudt <bcm@fixthebug.org> Acked-by: Olof Johansson <olof@lixom.net> Changes from v2: - switch ARCH_MULTIPLATFORM from select to depends - remove 'default y' from BCM_MOBILE Changes from v1: - fix alpha ordering in dts/Makefile - break into 4 patches for separate subsys
2013-10-30powerpc/powernv: Code update interfaceVasant Hegde
Code update interface for powernv platform. This provides sysfs interface to pass new image, validate, update and commit images. This patch includes: - Below OPAL APIs for code update - opal_validate_flash() - opal_manage_flash() - opal_update_flash() - Create below sysfs files under /sys/firmware/opal - image : Interface to pass new FW image - validate_flash : Validate candidate image - manage_flash : Commit/Reject operations - update_flash : Flash new candidate image Updating Image: "update_flash" is an interface to indicate flash new FW. It just passes image SG list to FW. Actual flashing is done during system reboot time. Note: - SG entry format: I have kept version number to keep this list similar to what PAPR is defined. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc/powernv: Create opal sysfs directoryVasant Hegde
Create /sys/firmware/opal directory. We wil use this interface to fetch opal error logs, firmware update, etc. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Add VMX optimised xor for RAID5Anton Blanchard
Add a VMX optimised xor, used primarily for RAID5. On a POWER7 blade this is a decent win: 32regs : 17932.800 MB/sec altivec : 19724.800 MB/sec The bigger gain is when the same test is run in SMT4 mode, as it would if there was a lot of work going on: 8regs : 8377.600 MB/sec altivec : 15801.600 MB/sec I tested this against an array created without the patch, and also verified it worked as expected on a little endian kernel. [ Fix !CONFIG_ALTIVEC build -- BenH ] Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc/kexec: kexec_sequence() is in misc_64.SGeert Uytterhoeven
Correct reference to the location of the kexec_sequence() assembly helper. There never was a kexec_stub.S in mainline. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Use 32 bit loads and stores when operating on condition register valuesAnton Blanchard
The condition register (CR) is a 32 bit quantity so we should use 32 bit loads and stores. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Enable virtio on ppc64 and pseries configsAnton Blanchard
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Enable multipath modules on ppc64 and pseriesAnton Blanchard
Enable a few modules required to boot on a POWER multipath box. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: sync ppc64, ppc64e and pseries configsAnton Blanchard
Run savedefconfig over the ppc64, ppc64e and pseries config Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Use -mcpu=power7 on ppc64 little endian buildsAnton Blanchard
Using -mcpu=power7 allows gcc to use a number of new instructions including 64 bit byte reversed loads. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc/pseries: Fix dedicated processor partition detectionAnton Blanchard
commit f13c13a00512 (powerpc: Stop using non-architected shared_proc field in lppaca) fixed a potential issue with shared/dedicated partition detection. The old method of detection relied on an unarchitected field (shared_proc), and this patch switched to using something architected (a non zero yield_count). Unfortunately the assertion in the Linux header that yield_count is only non zero on shared processor partitions is not true. It turns out dedicated processor partitions can increment yield_count and as such we falsely detect dedicated partitions as shared. Fix the comment, and switch back to using the old method. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Fix Unaligned LE Floating Point Loads and StoresTom Musta
This patch addresses unaligned single precision floating point loads and stores in the single-step code. The old implementation improperly treated an 8 byte structure as an array of two 4 byte words, which is a classic little endian bug. Signed-off-by: Tom Musta <tmusta@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Fix Unaligned Loads and StoresTom Musta
This patch modifies the unaligned access routines of the sstep.c module so that it properly reverses the bytes of storage operands in the little endian kernel kernel. This is implemented by breaking an unaligned little endian access into a combination of single byte accesses plus an overal byte reversal operation. Signed-off-by: Tom Musta <tmusta@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Enable Little Endian Alignment Handler for Float Pair InstructionsTom Musta
This patch enables alignment handling for the load/store floating point pair instructions (lfdp, lfdpx, stfdp, stfdpx). The handler routine is properly coded and only needs to be enabled. Signed-off-by: Tom Musta <tmusta@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Fix Handler of Unaligned Load/Store StringsTom Musta
The alignment handler is incorrect for unaligned string instructions in little endian mode. These instructions access data as arrays of bytes and thus are endian neutral. However, the routine also handles the load/store multiple instructions, which are NOT endian neutral. This patch toggles the byte swapping flag for the string instructions in little endian builds. This effectively disables the byte swapping logic. Signed-off-by: Tom Musta <tmusta@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc/pseries: Fix endian issues in pseries iommu codeAnton Blanchard
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Fix little endian issue in OF PCI scanAnton Blanchard
This issue was causing the QEMU emulated USB device to fail dring PCI probe. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc/vio: use strcpy in modalias_showPrarit Bhargava
Commit e82b89a6f19bae73fb064d1b3dd91fcefbb478f4 used strcat instead of strcpy which can result in an overflow of newlines on the buffer. Signed-off-by: Prarit Bhargava Cc: benh@kernel.crashing.org Cc: ben@decadent.org.uk Cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Fix 64K page size support for PPC44xAlistair Popple
PPC44x supports page sizes other than 4K however when 64K page sizes are selected compilation fails. This is due to a change in the definition of pgtable_t introduced by the following patch: commit 5c1f6ee9a31cbdac90bbb8ae1ba4475031ac74b4 Author: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> powerpc: Reduce PTE table memory wastage The above patch only implements the new layout for PPC64 so it doesn't compile for PPC32 with a 64K page size. Ideally we should implement the same layout for PPC32 however for the meantime this patch reverts the definition of pgtable_t for PPC32. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit (git 2.34.1) at 2025-09-23 06:04:21 +0000