summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-12gianfar: convert u64 status counters to atomic64_tPaul Gortmaker
While looking at some asm dump for an unrelated change, Eric noticed in the following stats count increment code: 50b8: 81 3c 01 f8 lwz r9,504(r28) 50bc: 81 5c 01 fc lwz r10,508(r28) 50c0: 31 4a 00 01 addic r10,r10,1 50c4: 7d 29 01 94 addze r9,r9 50c8: 91 3c 01 f8 stw r9,504(r28) 50cc: 91 5c 01 fc stw r10,508(r28) that a 64 bit counter was used on ppc-32 without sync and hence the "ethtool -S" output was racy. Here we convert all the values to use atomic64_t so that the output will always be consistent. Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-02-12gianfar: remove largely unused gfar_stats structPaul Gortmaker
The gfar_stats struct is only used in copying out data via ethtool. It is declared as the extra stats, followed by the rmon stats. However, the rmon stats are never actually ever used in the driver; instead the rmon data is a u32 register read that is cast directly into the ethtool buf. It seems the only reason rmon is in the struct at all is to give the offset(s) at which it should be exported into the ethtool buffer. But note gfar_stats doesn't contain a gfar_extra_stats as a substruct -- instead it contains a u64 array of equal element count. This implicitly means we have two independent declarations of what gfar_extra_stats really is. Rather than have this duality, we already have defines which give us the offset directly, and hence do not need the struct at all. Further, since we know the extra_stats is unconditionally always present, we can write it out to the ethtool buf 1st, and then optionally write out the rmon data. There is no need for two independent loops, both of which are simply copying out the extra_stats to buf offset zero. This also helps pave the way towards allowing the extra stats fields to be converted to atomic64_t values, without having their types directly influencing the ethtool stats export code (gfar_fill_stats) that expects to deal with u64. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-02-12act_police: improved accuracy at high ratesJiri Pirko
Current act_police uses rate table computed by the "tc" userspace program, which has the following issue: The rate table has 256 entries to map packet lengths to token (time units). With TSO sized packets, the 256 entry granularity leads to loss/gain of rate, making the token bucket inaccurate. Thus, instead of relying on rate table, this patch explicitly computes the time and accounts for packet transmission times with nanosecond granularity. This is a followup to 56b765b79e9a78dc7d3f8850ba5e5567205a3ecd ("htb: improved accuracy at high rates"). Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12act_police: move struct tcf_police to act_police.cJiri Pirko
It's not used anywhere else, so move it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12tbf: improved accuracy at high ratesJiri Pirko
Current TBF uses rate table computed by the "tc" userspace program, which has the following issue: The rate table has 256 entries to map packet lengths to token (time units). With TSO sized packets, the 256 entry granularity leads to loss/gain of rate, making the token bucket inaccurate. Thus, instead of relying on rate table, this patch explicitly computes the time and accounts for packet transmission times with nanosecond granularity. This is a followup to 56b765b79e9a78dc7d3f8850ba5e5567205a3ecd ("htb: improved accuracy at high rates"). Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12sch_api: introduce qdisc_watchdog_schedule_ns()Jiri Pirko
tbf will need to schedule watchdog in ns. No need to convert it twice. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12sch: make htb_rate_cfg and functions around that genericJiri Pirko
As it is going to be used in tbf as well, push these to generic code. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12htb: initialize cl->tokens and cl->ctokens correctlyJiri Pirko
These are in ns so convert from ticks to ns. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12htb: remove pointless first initialization of buffer and cbufferJiri Pirko
These are initialized correctly a couple of lines later in the function. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12htb: use PSCHED_TICKS2NS()Jiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c The bnx2x gso_type setting bug fix in 'net' conflicted with changes in 'net-next' that broke the gso_* setting logic out into a seperate function, which also fixes the bug in question. Thus, use the 'net-next' version. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12htb: fix values in opt dumpJiri Pirko
in htb_change_class() cl->buffer and cl->buffer are stored in ns. So in dump, convert them back to psched ticks. Note this was introduced by: commit 56b765b79e9a78dc7d3f8850ba5e5567205a3ecd htb: improved accuracy at high rates Please consider this for -net/-stable. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12x86, head_32: Give the 6 label a real nameBorislav Petkov
Jumping here we are about to enable paging so rename the label accordingly. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1360592538-10643-5-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-12x86, head_32: Remove second CPUID detection from default_entryBorislav Petkov
We do that once earlier now and cache it into new_cpu_data.cpuid_level so no need for the EFLAGS.ID toggling dance anymore. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1360592538-10643-4-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-12x86: Detect CPUID support early at bootBorislav Petkov
We detect CPUID function support on each CPU and save it for later use, obviating the need to play the toggle EFLAGS.ID game every time. C code is looking at ->cpuid_level anyway. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1360592538-10643-3-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-12x86, head_32: Remove i386 piecesBorislav Petkov
Remove code fragments detecting a 386 CPU since we don't support those anymore. Also, do not do alignment checks because they're done only at CPL3. Also, no need to preserve EFLAGS. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1360592538-10643-2-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-12Merge tag 'v3.8-rc7' into x86/asmH. Peter Anvin
Merge in the updates to head_32.S from the previous urgent branch, as upcoming patches will make further changes. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-12Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile into akpm Pull tile bugfixes from Chris Metcalf: "This includes a variety of minor bug fixes, mostly to do with testing "make allyesconfig", "make allmodconfig", "make allnoconfig", inspired to Tejun Heo's observation about Kconfig.freezer not being included. The largest changes are just syntax changes removing the tile-specific use of a macro named INT_MASK, which is way too commonly redefined throughout driver code" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: tag some code with #ifdef CONFIG_COMPAT tile: fix memcpy_*io functions for allnoconfig tile: export a handful of symbols appropriately drm: fix compile failure by including <linux/swiotlb.h> tile: avoid defining INT_MASK macro in <arch/interrupts.h> tile: provide "screen_info" when enabling VT drivers/input/joystick/analog.c: enable precise timer tile: include kernel/Kconfig.freezer in tile Kconfig tile: remove an unused variable in copy_thread()
2013-02-12Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into akpm Pull ARM SoC fixes from Olof Johansson: "We had a number of fixes queued up, but taking a strict pass-through and weeding out any that either have been broken for a while, or are for platforms that need out-of-tree code to be useful anyway, or other fixes for problems that few users are likely to see in real life, only this short branch of patches remains. The three patches here are to make SMP boot work on the Calxeda platforms again. Some of the rework for cpuids on 3.8 broke it (and it was discovered late, unfortunately)." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: highbank: mask cluster id from cpu_logical_map ARM: scu: mask cluster id from cpu_logical_map ARM: scu: add empty scu_enable for !CONFIG_SMP
2013-02-12mm: cma: fix accounting of CMA pages placed in high memoryMarek Szyprowski
The total number of low memory pages is determined as totalram_pages - totalhigh_pages, so without this patch all CMA pageblocks placed in highmem were accounted to low memory. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-12kernel/pid.c: reenable interrupts when alloc_pid() fails because init has exitedEric W. Biederman
We're forgetting to reenable local interrupts on an error path. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Reported-by: Josh Boyer <jwboyer@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-12memcg: fix kmemcg registration for late cachesGlauber Costa
The designed workflow for the caches in kmemcg is: register it with memcg_register_cache() if kmemcg is already available or later on when a new kmemcg appears at memcg_update_cache_sizes() which will handle all caches in the system. The caches created at boot time will be handled by the later, and the memcg-caches as well as any system caches that are registered later on by the former. There is a bug, however, in memcg_register_cache: we correctly set up the array size, but do not mark the cache as a root cache. This means that allocations for any cache appearing late in the game will see memcg->memcg_params->is_root_cache == false, and in particular, trigger VM_BUG_ON(!cachep->memcg_params->is_root_cache) in __memcg_kmem_cache_get. The obvious fix is to include the missing assignment. Signed-off-by: Glauber Costa <glommer@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-12mm: don't overwrite mm->def_flags in do_mlockall()Gerald Schaefer
With commit 8e72033f2a48 ("thp: make MADV_HUGEPAGE check for mm->def_flags") the VM_NOHUGEPAGE flag may be set on s390 in mm->def_flags for certain processes, to prevent future thp mappings. This would be overwritten by do_mlockall(), which sets it back to 0 with an optional VM_LOCKED flag set. To fix this, instead of overwriting mm->def_flags in do_mlockall(), only the VM_LOCKED flag should be set or cleared. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reported-by: Vivek Goyal <vgoyal@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-12drivers/rtc/rtc-pl031.c: restore ST variant functionalityLinus Walleij
Commit e7e034e18a0a ("drivers/rtc/rtc-pl031.c: fix the missing operation on enable") accidentally broke the ST variants of PL031. The bit that is being poked as "clockwatch" enable bit for the ST variants does the work of bit 0 on this variant. Bit 0 is used for a clock divider on the ST variants, and setting it to 1 will affect timekeeping in a very bad way. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-12netfilter: nf_ct_helper: don't discard helper if it is actually the sameFlorian Westphal
commit (32f5376 netfilter: nf_ct_helper: disable automatic helper re-assignment of different type) broke transparent proxy scenarios. For example, initial helper lookup might yield "ftp" (dport 21), while re-lookup after REDIRECT yields "ftp-2121". This causes the autoassign code to toss the ftp helper, even though these are just different instances of the same helper. Change the test to check for the helper function address instead of the helper address, as suggested by Pablo. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
2013-02-12netfilter: ctnetlink: don't permit ct creation with random tupleFlorian Westphal
Userspace can cause kernel panic by not specifying orig/reply tuple: kernel will create a tuple with random stack values. Problem is that tuple.dst.dir will be random, too, which causes nf_ct_tuplehash_to_ctrack() to return garbage. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
2013-02-12net: fec_mpc52xx: Read MAC address from device-treeStefan Roese
Until now, the MPC5200 FEC ethernet driver relied upon the bootloader (U-Boot) to write the MAC address into the ethernet controller registers. The Linux driver should not rely on such a thing. So lets read the MAC address from the DT as it should be done here. The following priority is now used to read the MAC address: 1) First, try OF node MAC address, if not present or invalid, then: 2) Read from MAC address registers, if invalid, then: 3) Log a warning message, and choose a random MAC address. This fixes a problem with a MPC5200 board that uses the SPL U-Boot version without FEC initialization before Linux booting for boot speedup. Additionally a status line is now be printed upon successful driver probing, also displaying this MAC address. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12cxgb4vf: Fix VLAN extraction counter incrementVipul Pandya
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12driver: net: ethernet: cpsw: dual emac interface implementationMugunthan V N
The CPSW switch can act as Dual EMAC by segregating the switch ports using VLAN and port VLAN as per the TRM description in 14.3.2.10.2 Dual Mac Mode Following CPSW components will be common for both the interfaces. * Interrupt source is common for both eth interfaces * Interrupt pacing is common for both interfaces * Hardware statistics is common for all the ports * CPDMA is common for both eth interface * CPTS is common for both the interface and it should not be enabled on both the interface as timestamping information doesn't contain port information. Constrains * Reserved VID of One port should not be used in other interface which will enable switching functionality * Same VID must not be used in both the interface which will enable switching functionality Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12driver: net: ethernet: cpsw: make cpts as pointerMugunthan V N
As CPTS is common module for both EMAC in Dual EMAC mode so making cpts as pointer. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12driver: net: ethernet: davinci_cpdma: add support for directed packet and ↵Mugunthan V N
source port detection * Introduced parameter to add port number for directed packet in cpdma_chan_submit * Source port detection macro with DMA descriptor status Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Here is another handful of late-breaking fixes intended for the 3.8 stream... Hopefully the will still make it! :-) There are three mac80211 fixes pulled from Johannes: "Here are three fixes still for the 3.8 stream, the fix from Cong Ding for the bad sizeof (Stephen Hemminger had pointed it out before but I'd promptly forgotten), a mac80211 managed-mode channel context usage fix where a downgrade would never stop until reaching non-HT and a bug in the channel determination that could cause invalid channels like HT40+ on channel 11 to be used." Also included is a mwl8k fix that avoids an oops when using mwl8k devices that only support the 5 GHz band. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12pstore: Create a convenient mount point for pstoreJosh Boyer
Using /dev/pstore as a mount point for the pstore filesystem is slightly awkward. We don't normally mount filesystems in /dev/ and the /dev/pstore file isn't created automatically by anything. While this method will still work, we can create a persistent mount point in sysfs. This will put pstore on par with things like cgroups and efivarfs. Signed-off-by: Josh Boyer <jwboyer@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-02-12ixgbe: Only set gso_type to SKB_GSO_TCPV4 as RSC does not support IPv6Alexander Duyck
The original fix that was applied for setting gso_type required more change than necessary because it was assumed ixgbe does RSC on IPv6 frames and this is not correct. RSC is only supported with IPv4/TCP frames only. As such we can simplify the fix and avoid the unnecessary move of eth_type_trans. The previous patch "ixgbe: fix gso type" and this patch reduce the entire fix to one line that sets gso_type to TCPV4 if the frame is RSC. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12net: fix infinite loop in __skb_recv_datagram()Eric Dumazet
Tommi was fuzzing with trinity and reported the following problem : commit 3f518bf745 (datagram: Add offset argument to __skb_recv_datagram) missed that a raw socket receive queue can contain skbs with no payload. We can loop in __skb_recv_datagram() with MSG_PEEK mode, because wait_for_packet() is not prepared to skip these skbs. [ 83.541011] INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=26002 jiffies, g=27673, c=27672, q=75) [ 83.541011] INFO: Stall ended before state dump start [ 108.067010] BUG: soft lockup - CPU#0 stuck for 22s! [trinity-child31:2847] ... [ 108.067010] Call Trace: [ 108.067010] [<ffffffff818cc103>] __skb_recv_datagram+0x1a3/0x3b0 [ 108.067010] [<ffffffff818cc33d>] skb_recv_datagram+0x2d/0x30 [ 108.067010] [<ffffffff819ed43d>] rawv6_recvmsg+0xad/0x240 [ 108.067010] [<ffffffff818c4b04>] sock_common_recvmsg+0x34/0x50 [ 108.067010] [<ffffffff818bc8ec>] sock_recvmsg+0xbc/0xf0 [ 108.067010] [<ffffffff818bf31e>] sys_recvfrom+0xde/0x150 [ 108.067010] [<ffffffff81ca4329>] system_call_fastpath+0x16/0x1b Reported-by: Tommi Rantala <tt.rantala@gmail.com> Tested-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12net: qmi_wwan: add Yota / Megafon M100-1 4g modemBjørn Mork
Interface layout: 00 CD-ROM 01 debug COM port 02 AP control port 03 modem 04 usb-ethernet Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0408 ProdID=ea42 Rev= 0.00 S: Manufacturer=Qualcomm, Incorporated S: Product=Qualcomm CDMA Technologies MSM S: SerialNumber=353568051xxxxxx C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12net: sctp: remove unused multiple cookie keysDaniel Borkmann
Vlad says: The whole multiple cookie keys code is completely unused and has been all this time. Noone uses anything other then the secret_key[0] since there is no changeover support anywhere. Thus, for now clean up its left-over fragments. Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12efi_pstore: Introducing workqueue updating sysfsSeiji Aguchi
[Problem] efi_pstore creates sysfs entries, which enable users to access to NVRAM, in a write callback. If a kernel panic happens in an interrupt context, it may fail because it could sleep due to dynamic memory allocations during creating sysfs entries. [Patch Description] This patch removes sysfs operations from a write callback by introducing a workqueue updating sysfs entries which is scheduled after the write callback is called. Also, the workqueue is kicked in a just oops case. A system will go down in other cases such as panic, clean shutdown and emergency restart. And we don't need to create sysfs entries because there is no chance for users to access to them. efi_pstore will be robust against a kernel panic in an interrupt context with this patch. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-02-12efivars: Disable external interrupt while holding efivars->lockSeiji Aguchi
[Problem] There is a scenario which efi_pstore fails to log messages in a panic case. - CPUA holds an efi_var->lock in either efivarfs parts or efi_pstore with interrupt enabled. - CPUB panics and sends IPI to CPUA in smp_send_stop(). - CPUA stops with holding the lock. - CPUB kicks efi_pstore_write() via kmsg_dump(KSMG_DUMP_PANIC) but it returns without logging messages. [Patch Description] This patch disables an external interruption while holding efivars->lock as follows. In efi_pstore_write() and get_var_data(), spin_lock/spin_unlock is replaced by spin_lock_irqsave/spin_unlock_irqrestore because they may be called in an interrupt context. In other functions, they are replaced by spin_lock_irq/spin_unlock_irq. because they are all called from a process context. By applying this patch, we can avoid the problem above with a following senario. - CPUA holds an efi_var->lock with interrupt disabled. - CPUB panics and sends IPI to CPUA in smp_send_stop(). - CPUA receives the IPI after releasing the lock because it is disabling interrupt while holding the lock. - CPUB waits for one sec until CPUA releases the lock. - CPUB kicks efi_pstore_write() via kmsg_dump(KSMG_DUMP_PANIC) And it can hold the lock successfully. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Mike Waychison <mikew@google.com> Acked-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-02-12Merge branch 'timers/for-arm' into timers/coreThomas Gleixner
2013-02-12clockevents: Fix generic broadcast for FEAT_C3STOPMark Rutland
Commit 12ad100046: "clockevents: Add generic timer broadcast function" made tick_device_uses_broadcast set up the generic broadcast function for dummy devices (where !tick_device_is_functional(dev)), but neglected to set up the broadcast function for devices that stop in low power states (with the CLOCK_EVT_FEAT_C3STOP flag). When these devices enter low power states they will not have the generic broadcast function assigned, and will bring down the system when an attempt is made to broadcast to them. This patch ensures that the broadcast function is also assigned for devices which require broadcast in low power states. Reported-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> Cc: linux-arm-kernel@lists.infradead.org Cc: nico@linaro.org Cc: Marc.Zyngier@arm.com Cc: Will.Deacon@arm.com Cc: santosh.shilimkar@ti.com Cc: john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-02-12Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Conflicts: drivers/net/wireless/iwlwifi/mvm/mac80211.c
2013-02-12Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Three nouveau fixes, all user visible issues, and one radeon regression fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: enforce use of radeon_get_ib_value when reading user cmd drm/nouveau: add lockdep annotations drm/nv50/fb: Fix nullptr-deref on IGPs drm/nouveau: use different register to wait for secret scrubber
2013-02-12rtlwifi: Initialize rate_init member of struct rate_control_opsCatalin Iacob
This partially reverts commit 44ba973699b831414c3f8eef68ee5a7fe1208a05. rate_control_rate_init assumes the rate_init member of struct rate_control_ops is not NULL therefore not initializing it leads to an oops as soon the driver succesfully associates to an AP. The removal of rate_update from 44ba973699b831414c3f8eef68ee5a7fe1208a05 is ok because rate_update is checked for NULL before being called. Signed-off-by: Catalin Iacob <iacobcatalin@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-12Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-02-12iwlwifi: mvm: beautify code in rx_handlersEmmanuel Grumbach
Make the code more readable, and while at it also add a missing "break" to avoid checking handlers that cannot be used. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: mvm: update station when marked associatedJohannes Berg
In managed mode, the HT/VHT capabilities aren't set when the station is initially added, so update the station when it is marked associated. In AP/GO mode, the station will typically be added with full capabilities today, but an upcoming change in hostapd may mean a similar scenario as for managed mode, therefore do the update unconditionally. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: mvm: don't wait for session protection to startJohannes Berg
Now that mac80211 no longer starts the auth/assoc timeouts when it transmits the frame, but only when the frame status arrives, we no longer need to wait for the session protection time event to start, we can schedule it and enqueue the auth/assoc frame right away. This reduces the amount of time we block mac80211's workqueue. Also, since now we no longer need different behavior for session protection and P2P time events, refactor the code to have just a common implementation. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: mvm: don't delay the association until after beaconJohannes Berg
If we haven't heard a beacon before we associate we can still start the association process and set the MAC in the firmware to associated only after having received a beacon with DTIM period by reacting to the new change flag (BSS_CHANGED_DTIM_PERIOD) from mac80211. This reduces the association time in these cases. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: dvm: apply beacon changes immediatelyJohannes Berg
If the AP/GO beacon changes, apply such a change immediately, otherwise the AP/GO beacon can be stale for a long time. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-09-14 15:04:55 +0000