| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple more small driver specific fixes for v6.5.
The device mode for Cadence had been broken by some recent updates
done for host mode and large transfers for multi-byte words on stm32
had been broken by an API update in what I think was a rebasing
incident"
* tag 'spi-fix-v6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-cadence: Fix data corruption issues in slave mode
spi: stm32: fix accidential revert to byte-sized transfer splitting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wifi, can and netfilter.
Fixes to fixes:
- nf_tables:
- GC transaction race with abort path
- defer gc run if previous batch is still pending
Previous releases - regressions:
- ipv4: fix data-races around inet->inet_id
- phy: fix deadlocking in phy_error() invocation
- mdio: fix C45 read/write protocol
- ipvlan: fix a reference count leak warning in ipvlan_ns_exit()
- ice: fix NULL pointer deref during VF reset
- i40e: fix potential NULL pointer dereferencing of pf->vf in
i40e_sync_vsi_filters()
- tg3: use slab_build_skb() when needed
- mtk_eth_soc: fix NULL pointer on hw reset
Previous releases - always broken:
- core: validate veth and vxcan peer ifindexes
- sched: fix a qdisc modification with ambiguous command request
- devlink: add missing unregister linecard notification
- wifi: mac80211: limit reorder_buf_filtered to avoid UBSAN warning
- batman:
- do not get eth header before batadv_check_management_packet
- fix batadv_v_ogm_aggr_send memory leak
- bonding: fix macvlan over alb bond support
- mlxsw: set time stamp fields also when its type is MIRROR_UTC"
* tag 'net-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
selftests: bonding: add macvlan over bond testing
selftest: bond: add new topo bond_topo_2d1c.sh
bonding: fix macvlan over alb bond support
rtnetlink: Reject negative ifindexes in RTM_NEWLINK
netfilter: nf_tables: defer gc run if previous batch is still pending
netfilter: nf_tables: fix out of memory error handling
netfilter: nf_tables: use correct lock to protect gc_list
netfilter: nf_tables: GC transaction race with abort path
netfilter: nf_tables: flush pending destroy work before netlink notifier
netfilter: nf_tables: validate all pending tables
ibmveth: Use dcbf rather than dcbfl
i40e: fix potential NULL pointer dereferencing of pf->vf i40e_sync_vsi_filters()
net/sched: fix a qdisc modification with ambiguous command request
igc: Fix the typo in the PTM Control macro
batman-adv: Hold rtnl lock during MTU update via netlink
igb: Avoid starting unnecessary workqueues
can: raw: add missing refcount for memory leak fix
can: isotp: fix support for transmission of SF without flow control
bnx2x: new flag for track HW resource allocation
sfc: allocate a big enough SKB for loopback selftest packet
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter updates for net
This PR contains nf_tables updates for your *net* tree.
First patch fixes table validation, I broke this in 6.4 when tracking
validation state per table, reported by Pablo, fixup from myself.
Second patch makes sure objects waiting for memory release have been
released, this was broken in 6.1, patch from Pablo Neira Ayuso.
Patch three is a fix-for-fix from previous PR: In case a transaction
gets aborted, gc sequence counter needs to be incremented so pending
gc requests are invalidated, from Pablo.
Same for patch 4: gc list needs to use gc list lock, not destroy lock,
also from Pablo.
Patch 5 fixes a UaF in a set backend, but this should only occur when
failslab is enabled for GFP_KERNEL allocations, broken since feature
was added in 5.6, from myself.
Patch 6 fixes a double-free bug that was also added via previous PR:
We must not schedule gc work if the previous batch is still queued.
netfilter pull request 2023-08-23
* tag 'nf-23-08-23' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: defer gc run if previous batch is still pending
netfilter: nf_tables: fix out of memory error handling
netfilter: nf_tables: use correct lock to protect gc_list
netfilter: nf_tables: GC transaction race with abort path
netfilter: nf_tables: flush pending destroy work before netlink notifier
netfilter: nf_tables: validate all pending tables
====================
Link: https://lore.kernel.org/r/20230823152711.15279-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Hangbin Liu says:
====================
fix macvlan over alb bond support
Currently, the macvlan over alb bond is broken after commit
14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds").
Fix this and add relate tests.
====================
Link: https://lore.kernel.org/r/20230823071907.3027782-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a macvlan over bonding test with mode active-backup, balance-tlb
and balance-alb.
]# ./bond_macvlan.sh
TEST: active-backup: IPv4: client->server [ OK ]
TEST: active-backup: IPv6: client->server [ OK ]
TEST: active-backup: IPv4: client->macvlan_1 [ OK ]
TEST: active-backup: IPv6: client->macvlan_1 [ OK ]
TEST: active-backup: IPv4: client->macvlan_2 [ OK ]
TEST: active-backup: IPv6: client->macvlan_2 [ OK ]
TEST: active-backup: IPv4: macvlan_1->macvlan_2 [ OK ]
TEST: active-backup: IPv6: macvlan_1->macvlan_2 [ OK ]
TEST: active-backup: IPv4: server->client [ OK ]
TEST: active-backup: IPv6: server->client [ OK ]
TEST: active-backup: IPv4: macvlan_1->client [ OK ]
TEST: active-backup: IPv6: macvlan_1->client [ OK ]
TEST: active-backup: IPv4: macvlan_2->client [ OK ]
TEST: active-backup: IPv6: macvlan_2->client [ OK ]
TEST: active-backup: IPv4: macvlan_2->macvlan_2 [ OK ]
TEST: active-backup: IPv6: macvlan_2->macvlan_2 [ OK ]
[...]
TEST: balance-alb: IPv4: client->server [ OK ]
TEST: balance-alb: IPv6: client->server [ OK ]
TEST: balance-alb: IPv4: client->macvlan_1 [ OK ]
TEST: balance-alb: IPv6: client->macvlan_1 [ OK ]
TEST: balance-alb: IPv4: client->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: client->macvlan_2 [ OK ]
TEST: balance-alb: IPv4: macvlan_1->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: macvlan_1->macvlan_2 [ OK ]
TEST: balance-alb: IPv4: server->client [ OK ]
TEST: balance-alb: IPv6: server->client [ OK ]
TEST: balance-alb: IPv4: macvlan_1->client [ OK ]
TEST: balance-alb: IPv6: macvlan_1->client [ OK ]
TEST: balance-alb: IPv4: macvlan_2->client [ OK ]
TEST: balance-alb: IPv6: macvlan_2->client [ OK ]
TEST: balance-alb: IPv4: macvlan_2->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: macvlan_2->macvlan_2 [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a new testing topo bond_topo_2d1c.sh which is used more commonly.
Make bond_topo_3d1c.sh just source bond_topo_2d1c.sh and add the
extra link.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The commit 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode
bonds") aims to enable the use of macvlans on top of rlb bond mode. However,
the current rlb bond mode only handles ARP packets to update remote neighbor
entries. This causes an issue when a macvlan is on top of the bond, and
remote devices send packets to the macvlan using the bond's MAC address
as the destination. After delivering the packets to the macvlan, the macvlan
will rejects them as the MAC address is incorrect. Consequently, this commit
makes macvlan over bond non-functional.
To address this problem, one potential solution is to check for the presence
of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev)
and return NULL in the rlb_arp_xmit() function. However, this approach
doesn't fully resolve the situation when a VLAN exists between the bond and
macvlan.
So let's just do a partial revert for commit 14af9963ba1e in rlb_arp_xmit().
As the comment said, Don't modify or load balance ARPs that do not originate
locally.
Fixes: 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds")
Reported-by: susan.zheng@veritas.com
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Negative ifindexes are illegal, but the kernel does not validate the
ifindex in the ancillary header of RTM_NEWLINK messages, resulting in
the kernel generating a warning [1] when such an ifindex is specified.
Fix by rejecting negative ifindexes.
[1]
WARNING: CPU: 0 PID: 5031 at net/core/dev.c:9593 dev_index_reserve+0x1a2/0x1c0 net/core/dev.c:9593
[...]
Call Trace:
<TASK>
register_netdevice+0x69a/0x1490 net/core/dev.c:10081
br_dev_newlink+0x27/0x110 net/bridge/br_netlink.c:1552
rtnl_newlink_create net/core/rtnetlink.c:3471 [inline]
__rtnl_newlink+0x115e/0x18c0 net/core/rtnetlink.c:3688
rtnl_newlink+0x67/0xa0 net/core/rtnetlink.c:3701
rtnetlink_rcv_msg+0x439/0xd30 net/core/rtnetlink.c:6427
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2545
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0x536/0x810 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x93c/0xe40 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:728 [inline]
sock_sendmsg+0xd9/0x180 net/socket.c:751
____sys_sendmsg+0x6ac/0x940 net/socket.c:2538
___sys_sendmsg+0x135/0x1d0 net/socket.c:2592
__sys_sendmsg+0x117/0x1e0 net/socket.c:2621
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 38f7b870d4a6 ("[RTNETLINK]: Link creation API")
Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230823064348.2252280-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Make an existing ACPI IRQ override quirk for PCSpecialist Elimina Pro
16 M work as intended (Hans de Goede)"
* tag 'acpi-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Fix IRQ override quirk for PCSpecialist Elimina Pro 16 M
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Final set of three small fixes for 6.5"
* tag 'platform-drivers-x86-v6.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/mellanox: Fix mlxbf-tmfifo not handling all virtio CONSOLE notifications
platform/x86: ideapad-laptop: Add support for new hotkeys found on ThinkBook 14s Yoga ITL
platform/x86: lenovo-ymc: Add Lenovo Yoga 7 14ACN6 to ec_trigger_quirk_dmi_table
|
|
notifications
rshim console does not show all entries of dmesg.
Fixed by setting MLXBF_TM_TX_LWM_IRQ for every CONSOLE notification.
Signed-off-by: Shih-Yi Chen <shihyic@nvidia.com>
Reviewed-by: Liming Sung <limings@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20230821150627.26075-1-shihyic@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Don't queue more gc work, else we may queue the same elements multiple
times.
If an element is flagged as dead, this can mean that either the previous
gc request was invalidated/discarded by a transaction or that the previous
request is still pending in the system work queue.
The latter will happen if the gc interval is set to a very low value,
e.g. 1ms, and system work queue is backlogged.
The sets refcount is 1 if no previous gc requeusts are queued, so add
a helper for this and skip gc run if old requests are pending.
Add a helper for this and skip the gc run in this case.
Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Several instances of pipapo_resize() don't propagate allocation failures,
this causes a crash when fault injection is enabled for gfp_kernel slabs.
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
|
|
Use nf_tables_gc_list_lock spinlock, not nf_tables_destroy_list_lock to
protect the gc list.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Abort path is missing a synchronization point with GC transactions. Add
GC sequence number hence any GC transaction losing race will be
discarded.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Destroy work waits for the RCU grace period then it releases the objects
with no mutex held. All releases objects follow this path for
transactions, therefore, order is guaranteed and references to top-level
objects in the hierarchy remain valid.
However, netlink notifier might interfer with pending destroy work.
rcu_barrier() is not correct because objects are not release via RCU
callback. Flush destroy work before releasing objects from netlink
notifier path.
Fixes: d4bc8271db21 ("netfilter: nf_tables: netlink notifier might race to release objects")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
We have to validate all tables in the transaction that are in
VALIDATE_DO state, the blamed commit below did not move the break
statement to its right location so we only validate one table.
Moreover, we can't init table->validate to _SKIP when a table object
is allocated.
If we do, then if a transcaction creates a new table and then
fails the transaction, nfnetlink will loop and nft will hang until
user cancels the command.
Add back the pernet state as a place to stash the last state encountered.
This is either _DO (we hit an error during commit validation) or _SKIP
(transaction passed all checks).
Fixes: 00c320f9b755 ("netfilter: nf_tables: make validation state per table")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
When building for power4, newer binutils don't recognise the "dcbfl"
extended mnemonic.
dcbfl RA, RB is equivalent to dcbf RA, RB, 1.
Switch to "dcbf" to avoid the build error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add check for pf->vf not being NULL before dereferencing
pf->vf[vsi->vf_id] in updating VSI filter sync.
Add a similar check before dereferencing !pf->vf[vsi->vf_id].trusted
in the condition for clearing promisc mode bit.
Fixes: c87c938f62d8 ("i40e: Add VF VLAN pruning")
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When replacing an existing root qdisc, with one that is of the same kind, the
request boils down to essentially a parameterization change i.e not one that
requires allocation and grafting of a new qdisc. syzbot was able to create a
scenario which resulted in a taprio qdisc replacing an existing taprio qdisc
with a combination of NLM_F_CREATE, NLM_F_REPLACE and NLM_F_EXCL leading to
create and graft scenario.
The fix ensures that only when the qdisc kinds are different that we should
allow a create and graft, otherwise it goes into the "change" codepath.
While at it, fix the code and comments to improve readability.
While syzbot was able to create the issue, it did not zone on the root cause.
Analysis from Vladimir Oltean <vladimir.oltean@nxp.com> helped narrow it down.
v1->V2 changes:
- remove "inline" function definition (Vladmir)
- remove extrenous braces in branches (Vladmir)
- change inline function names (Pedro)
- Run tdc tests (Victor)
v2->v3 changes:
- dont break else/if (Simon)
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+a3618a167af2021433cd@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/20230816225759.g25x76kmgzya2gei@skbuf/T/
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The IGC_PTM_CTRL_SHRT_CYC defines the time between two consecutive PTM
requests. The bit resolution of this field is six bits. That bit five was
missing in the mask. This patch comes to correct the typo in the
IGC_PTM_CTRL_SHRT_CYC macro.
Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20230821171721.2203572-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The automatic recalculation of the maximum allowed MTU is usually triggered
by code sections which are already rtnl lock protected by callers outside
of batman-adv. But when the fragmentation setting is changed via
batman-adv's own batadv genl family, then the rtnl lock is not yet taken.
But dev_set_mtu requires that the caller holds the rtnl lock because it
uses netdevice notifiers. And this code will then fail the check for this
lock:
RTNL: assertion failed at net/core/dev.c (1953)
Cc: stable@vger.kernel.org
Reported-by: syzbot+f8812454d9b3ac00d282@syzkaller.appspotmail.com
Fixes: c6a953cce8d0 ("batman-adv: Trigger events for auto adjusted MTU")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821-batadv-missing-mtu-rtnl-lock-v1-1-1c5a7bfe861e@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If ptp_clock_register() fails or CONFIG_PTP isn't enabled, avoid starting
PTP related workqueues.
In this way we can fix this:
BUG: unable to handle page fault for address: ffffc9000440b6f8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 1001e0067 PMD 107dc5067 PTE 0
Oops: 0000 [#1] PREEMPT SMP
[...]
Workqueue: events igb_ptp_overflow_check
RIP: 0010:igb_rd32+0x1f/0x60
[...]
Call Trace:
igb_ptp_read_82580+0x20/0x50
timecounter_read+0x15/0x60
igb_ptp_overflow_check+0x1a/0x50
process_one_work+0x1cb/0x3c0
worker_thread+0x53/0x3f0
? rescuer_thread+0x370/0x370
kthread+0x142/0x160
? kthread_associate_blkcg+0xc0/0xc0
ret_from_fork+0x1f/0x30
Fixes: 1f6e8178d685 ("igb: Prevent dropped Tx timestamps via work items and interrupts.")
Fixes: d339b1331616 ("igb: add PTP Hardware Clock code")
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821171927.2203644-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-08-21 (ice)
This series contains updates to ice driver only.
Jesse fixes an issue on calculating buffer size.
Petr Oros reverts a commit that does not fully resolve VF reset issues
and implements one that provides a fuller fix.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix NULL pointer deref during VF reset
Revert "ice: Fix ice VF reset during iavf initialization"
ice: fix receive buffer size miscalculation
====================
Link: https://lore.kernel.org/r/20230821171633.2203505-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Oliver Hartkopp says:
====================
CAN fixes for 6.5-rc7
The isotp fix removes an unnecessary check which leads to delays and/or
a wrong error notification.
The fix for the CAN_RAW socket solves the last issue that has been
introduced with commit ee8b94c8510c ("can: raw: fix receiver memory leak")
in this upstream cycle (detected by Eric Dumazet).
====================
Link: https://lore.kernel.org/r/20230821144547.6658-1-socketcan@hartkopp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit ee8b94c8510c ("can: raw: fix receiver memory leak") introduced
a new reference to the CAN netdevice that has assigned CAN filters.
But this new ro->dev reference did not maintain its own refcount which
lead to another KASAN use-after-free splat found by Eric Dumazet.
This patch ensures a proper refcount for the CAN nedevice.
Fixes: ee8b94c8510c ("can: raw: fix receiver memory leak")
Reported-by: Eric Dumazet <edumazet@google.com>
Cc: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20230821144547.6658-3-socketcan@hartkopp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The original implementation had a very simple handling for single frame
transmissions as it just sent the single frame without a timeout handling.
With the new echo frame handling the echo frame was also introduced for
single frames but the former exception ('simple without timers') has been
maintained by accident. This leads to a 1 second timeout when closing the
socket and to an -ECOMM error when CAN_ISOTP_WAIT_TX_DONE is selected.
As the echo handling is always active (also for single frames) remove the
wrong extra condition for single frames.
Fixes: 9f39d36530e5 ("can: isotp: add support for transmission without flow control")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20230821144547.6658-2-socketcan@hartkopp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While injecting PCIe errors to the upstream PCIe switch of
a BCM57810 NIC, system hangs/crashes were observed.
After several calls to bnx2x_tx_timout() complete,
bnx2x_nic_unload() is called to free up HW resources
and bnx2x_napi_disable() is called to release NAPI objects.
Later, when the EEH driver calls bnx2x_io_slot_reset() to
complete the recovery process, bnx2x attempts to disable
NAPI again by calling bnx2x_napi_disable() and freeing
resources which have already been freed, resulting in a
hang or crash.
Introduce a new flag to track the HW resource and NAPI
allocation state, refactor duplicated code into a single
function, check page pool allocation status before freeing,
and reduces debug output when a TX timeout event occurs.
Reviewed-by: Manish Chopra <manishc@marvell.com>
Tested-by: Abdul Haleem <abdhalee@in.ibm.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Venkata Sai Duggi <venkata.sai.duggi@ibm.com>
Signed-off-by: Thinh Tran <thinhtr@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20230818161443.708785-2-thinhtr@linux.vnet.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix DT node refcount when creating platform devices
- Fix deadlock in changeset code due to printing with devtree_lock held
- Fix unittest EXPECT strings for parse_phandle_with_args_map() test
- Fix IMA kexec memblock freeing
* tag 'devicetree-fixes-for-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/platform: increase refcount of fwnode
of: dynamic: Refactor action prints to not use "%pOF" inside devtree_lock
of: unittest: Fix EXPECT for parse_phandle_with_args_map() test
mm,ima,kexec,of: use memblock_free_late from ima_free_kexec_buffer
|
|
Cited commits passed a size to alloc_skb that was only big enough for
the actual packet contents, but the following skb_put + memcpy writes
the whole struct efx_loopback_payload including leading and trailing
padding bytes (which are then stripped off with skb_pull/skb_trim).
This could cause an skb_over_panic, although in practice we get saved
by kmalloc_size_roundup.
Pass the entire size we use, instead of the size of the final packet.
Reported-by: Andy Moreton <andy.moreton@amd.com>
Fixes: cf60ed469629 ("sfc: use padding to fix alignment in loopback test")
Fixes: 30c24dd87f3f ("sfc: siena: use padding to fix alignment in loopback test")
Fixes: 1186c6b31ee1 ("sfc: falcon: use padding to fix alignment in loopback test")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821180153.18652-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Two fixes:
- reorder buffer filter checks can cause bad shift/UBSAN
warning with newer HW, avoid the check (mac80211)
- add Kconfig dependency for iwlwifi for PTP clock usage
* tag 'wireless-2023-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: limit reorder_buf_filtered to avoid UBSAN warning
wifi: iwlwifi: mvm: add dependency for PTP clock
====================
Link: https://lore.kernel.org/r/20230822124206.43926-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit b655892ffd6d ("leds: trigger: netdev: expose hw_control status
via sysfs") exposed to sysfs the flag that tells whether the LED trigger
is offloaded to hardware, under the name "hw_control", since that is the
name under which this setting is called in the code.
Everywhere else in kernel when some work that is normally done in
software can be made to be done by hardware instead, we use the word
"offloading" to describe this, e.g. "LED blinking is offloaded to
hardware".
Normally renaming sysfs entries is a no-go because of backwards
compatibility. But since this patch was not yet released in a stable
kernel, I think it is still possible to rename it, if there is
consensus.
Fixes: b655892ffd6d ("leds: trigger: netdev: expose hw_control status via sysfs")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230821121453.30203-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a hardware reset is triggered on devices not initializing WED the
calls to mtk_wed_fe_reset and mtk_wed_fe_reset_complete dereference a
pointer on uninitialized stack memory.
Break out of both functions in case a hw_list entry is 0.
Fixes: 08a764a7c51b ("net: ethernet: mtk_wed: add reset/reset_complete callbacks")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/5465c1609b464cc7407ae1530c40821dcdf9d3e6.1692634266.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull NFS client fixes from Trond Myklebust:
- fix a use after free in nfs_direct_join_group() (Cc: stable)
- fix sysfs server name memory leak
- fix lock recovery hang in NFSv4.0
- fix page free in the error path for nfs42_proc_getxattr() and
__nfs4_get_acl_uncached()
- SUNRPC/rdma: fix receive buffer dma-mapping after a server disconnect
* tag 'nfs-for-6.5-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
xprtrdma: Remap Receive buffers after a reconnect
NFSv4: fix out path in __nfs4_get_acl_uncached
NFSv4.2: fix error handling in nfs42_proc_getxattr
NFS: Fix sysfs server name memory leak
NFS: Fix a use after free in nfs_direct_join_group()
NFSv4: Fix dropped lock for racing OPEN and delegation return
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A small fix for a potential problem when cleaning up after a failed
SELinux policy load (list next pointer not being properly initialized
to NULL early enough)"
* tag 'selinux-pr-20230821' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: set next pointer before attaching to list
|
|
The tg3 driver will use kmalloc() under some conditions. Check the
frag_size and use slab_build_skb() when frag_size is 0. Silences
the warning introduced by commit ce098da1497c ("skbuff: Introduce
slab_build_skb()"):
Use slab_build_skb() instead
...
tg3_poll_work+0x638/0xf90 [tg3]
Fixes: ce098da1497c ("skbuff: Introduce slab_build_skb()")
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Closes: https://lore.kernel.org/all/1bd4cb9c-4eb8-3bdb-3e05-8689817242d1@proxmox.com
Cc: Siva Reddy Kallam <siva.kallam@broadcom.com>
Cc: Prashant Sreedharan <prashant@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230818175417.never.273-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before adding a port to bond, it need to be set down first. In the
lacpdu test the author set the port down specifically. But commit
a4abfa627c38 ("net: rtnetlink: Enslave device before bringing it up")
changed the operation order, the kernel will set the port down _after_
adding to bond. So all the ports will be down at last and the test failed.
In fact, the veth interfaces are already inactive when added. This
means there's no need to set them down again before adding to the bond.
Let's just remove the link down operation.
Fixes: a4abfa627c38 ("net: rtnetlink: Enslave device before bringing it up")
Reported-by: Zhengchao Shao <shaozhengchao@huawei.com>
Closes: https://lore.kernel.org/netdev/a0ef07c7-91b0-94bd-240d-944a330fcabd@huawei.com/
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20230817082459.1685972-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
commit 0f8e5651095b
("of/platform: Propagate firmware node by calling device_set_node()")
use of_fwnode_handle to replace of_node_get, which introduces a side
effect that the refcount is not increased. Then the out of tree
jailhouse hypervisor enable/disable test will trigger kernel dump in
of_overlay_remove, with the following sequence
"
of_changeset_revert(&overlay_changeset);
of_changeset_destroy(&overlay_changeset);
of_overlay_remove(&overlay_id);
"
So increase the refcount to avoid issues.
This patch also release the refcount when releasing amba device to avoid
refcount leakage.
Fixes: 0f8e5651095b ("of/platform: Propagate firmware node by calling device_set_node()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230821023928.3324283-2-peng.fan@oss.nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
During stress test with attaching and detaching VF from KVM and
simultaneously changing VFs spoofcheck and trust there was a
NULL pointer dereference in ice_reset_vf that VF's VSI is null.
More than one instance of ice_reset_vf() can be running at a given
time. When we rebuild the VSI in ice_reset_vf, another reset can be
triaged from ice_service_task. In this case we can access the currently
uninitialized VSI and cause panic. The window for this racing condition
has been around for a long time but it's much worse after commit
227bf4500aaa ("ice: move VSI delete outside deconfig") because
the reset runs faster. ice_reset_vf() using vf->cfg_lock and when
we move this lock before accessing to the VF VSI, we can fix
BUG for all cases.
Panic occurs sometimes in ice_vsi_is_rx_queue_active() and sometimes
in ice_vsi_stop_all_rx_rings()
With our reproducer, we can hit BUG:
~8h before commit 227bf4500aaa ("ice: move VSI delete outside deconfig").
~20m after commit 227bf4500aaa ("ice: move VSI delete outside deconfig").
After this fix we are not able to reproduce it after ~48h
There was commit cf90b74341ee ("ice: Fix call trace with null VSI during
VF reset") which also tried to fix this issue, but it was only
partially resolved and the bug still exists.
[ 6420.658415] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 6420.665382] #PF: supervisor read access in kernel mode
[ 6420.670521] #PF: error_code(0x0000) - not-present page
[ 6420.675659] PGD 0
[ 6420.677679] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 6420.682038] CPU: 53 PID: 326472 Comm: kworker/53:0 Kdump: loaded Not tainted 5.14.0-317.el9.x86_64 #1
[ 6420.691250] Hardware name: Dell Inc. PowerEdge R750/04V528, BIOS 1.6.5 04/15/2022
[ 6420.698729] Workqueue: ice ice_service_task [ice]
[ 6420.703462] RIP: 0010:ice_vsi_is_rx_queue_active+0x2d/0x60 [ice]
[ 6420.705860] ice 0000:ca:00.0: VF 0 is now untrusted
[ 6420.709494] Code: 00 00 66 83 bf 76 04 00 00 00 48 8b 77 10 74 3e 31 c0 eb 0f 0f b7 97 76 04 00 00 48 83 c0 01 39 c2 7e 2b 48 8b 97 68 04 00 00 <0f> b7 0c 42 48 8b 96 20 13 00 00 48 8d 94 8a 00 00 12 00 8b 12 83
[ 6420.714426] ice 0000:ca:00.0 ens7f0: Setting MAC 22:22:22:22:22:00 on VF 0. VF driver will be reinitialized
[ 6420.733120] RSP: 0018:ff778d2ff383fdd8 EFLAGS: 00010246
[ 6420.733123] RAX: 0000000000000000 RBX: ff2acf1916294000 RCX: 0000000000000000
[ 6420.733125] RDX: 0000000000000000 RSI: ff2acf1f2c6401a0 RDI: ff2acf1a27301828
[ 6420.762346] RBP: ff2acf1a27301828 R08: 0000000000000010 R09: 0000000000001000
[ 6420.769476] R10: ff2acf1916286000 R11: 00000000019eba3f R12: ff2acf19066460d0
[ 6420.776611] R13: ff2acf1f2c6401a0 R14: ff2acf1f2c6401a0 R15: 00000000ffffffff
[ 6420.783742] FS: 0000000000000000(0000) GS:ff2acf28ffa80000(0000) knlGS:0000000000000000
[ 6420.791829] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6420.797575] CR2: 0000000000000000 CR3: 00000016ad410003 CR4: 0000000000773ee0
[ 6420.804708] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6420.811034] vfio-pci 0000:ca:01.0: enabling device (0000 -> 0002)
[ 6420.811840] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6420.811841] PKRU: 55555554
[ 6420.811842] Call Trace:
[ 6420.811843] <TASK>
[ 6420.811844] ice_reset_vf+0x9a/0x450 [ice]
[ 6420.811876] ice_process_vflr_event+0x8f/0xc0 [ice]
[ 6420.841343] ice_service_task+0x23b/0x600 [ice]
[ 6420.845884] ? __schedule+0x212/0x550
[ 6420.849550] process_one_work+0x1e2/0x3b0
[ 6420.853563] ? rescuer_thread+0x390/0x390
[ 6420.857577] worker_thread+0x50/0x3a0
[ 6420.861242] ? rescuer_thread+0x390/0x390
[ 6420.865253] kthread+0xdd/0x100
[ 6420.868400] ? kthread_complete_and_exit+0x20/0x20
[ 6420.873194] ret_from_fork+0x1f/0x30
[ 6420.876774] </TASK>
[ 6420.878967] Modules linked in: vfio_pci vfio_pci_core vfio_iommu_type1 vfio iavf vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_counter nf_tables bridge stp llc sctp ip6_udp_tunnel udp_tunnel nfp tls nfnetlink bluetooth mlx4_en mlx4_core rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill sunrpc intel_rapl_msr intel_rapl_common i10nm_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp irdma kvm_intel i40e kvm iTCO_wdt dcdbas ib_uverbs irqbypass iTCO_vendor_support mgag200 mei_me ib_core dell_smbios isst_if_mmio isst_if_mbox_pci rapl i2c_algo_bit drm_shmem_helper intel_cstate drm_kms_helper syscopyarea sysfillrect isst_if_common sysimgblt intel_uncore fb_sys_fops dell_wmi_descriptor wmi_bmof intel_vsec mei i2c_i801 acpi_ipmi ipmi_si i2c_smbus ipmi_devintf intel_pch_thermal acpi_power_meter pcspk
r
Fixes: efe41860008e ("ice: Fix memory corruption in VF driver")
Fixes: f23df5220d2b ("ice: Fix spurious interrupt during removal of trusted VF")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This reverts commit 7255355a0636b4eff08d5e8139c77d98f151c4fc.
After this commit we are not able to attach VF to VM:
virsh attach-interface v0 hostdev --managed 0000:41:01.0 --mac 52:52:52:52:52:52
error: Failed to attach interface
error: Cannot set interface MAC to 52:52:52:52:52:52 for ifname enp65s0f0np0 vf 0: Resource temporarily unavailable
ice_check_vf_ready_for_cfg() already contain waiting for reset.
New condition in ice_check_vf_ready_for_reset() causing only problems.
Fixes: 7255355a0636 ("ice: Fix ice VF reset during iavf initialization")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The driver is misconfiguring the hardware for some values of MTU such that
it could use multiple descriptors to receive a packet when it could have
simply used one.
Change the driver to use a round-up instead of the result of a shift, as
the shift can truncate the lower bits of the size, and result in the
problem noted above. It also aligns this driver with similar code in i40e.
The insidiousness of this problem is that everything works with the wrong
size, it's just not working as well as it could, as some MTU sizes end up
using two or more descriptors, and there is no way to tell that is
happening without looking at ice_trace or a bus analyzer.
Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
While originally it was fine to format strings using "%pOF" while
holding devtree_lock, this now causes a deadlock. Lockdep reports:
of_get_parent from of_fwnode_get_parent+0x18/0x24
^^^^^^^^^^^^^
of_fwnode_get_parent from fwnode_count_parents+0xc/0x28
fwnode_count_parents from fwnode_full_name_string+0x18/0xac
fwnode_full_name_string from device_node_string+0x1a0/0x404
device_node_string from pointer+0x3c0/0x534
pointer from vsnprintf+0x248/0x36c
vsnprintf from vprintk_store+0x130/0x3b4
Fix this by moving the printing in __of_changeset_entry_apply() outside
the lock. As the only difference in the multiple prints is the action
name, use the existing "action_names" to refactor the prints into a
single print.
Fixes: a92eb7621b9fb2c2 ("lib/vsprintf: Make use of fwnode API to obtain node names and separators")
Cc: stable@vger.kernel.org
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-2-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Commit 12e17243d8a1 ("of: base: improve error msg in
of_phandle_iterator_next()") added printing of the phandle value on
error, but failed to update the unittest.
Fixes: 12e17243d8a1 ("of: base: improve error msg in of_phandle_iterator_next()")
Cc: stable@vger.kernel.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-1-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Remove 10us delay in cdns_spi_process_fifo() (called from cdns_spi_irq())
to fix data corruption issue on Master side when this driver
configured in Slave mode, as Slave is failed to prepare the date
on time due to above delay.
Add 10us delay before processing the RX FIFO as TX empty doesn't
guarantee valid data in RX FIFO.
Signed-off-by: Srinivas Goud <srinivas.goud@amd.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1692610216-217644-1-git-send-email-srinivas.goud@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 6f486556abe35 ("spi: stm32: renaming of spi_master into
spi_controller") included an accidential reverted of a change added in
commit 1e4929112507f ("spi: stm32: split large transfers based on word
size instead of bytes").
This breaks large SPI transfers with word sizes > 8 bits, which are
e.g. common when driving MIPI DBI displays.
Fix this by using `spi_split_transfers_maxwords()` instead of
`spi_split_transfers_maxsize()`.
Fixes: 6f486556abe35 ("spi: stm32: renaming of spi_master into spi_controller")
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Link: https://lore.kernel.org/r/20230816145237.3159817-1-l.goehrs@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
14s Yoga ITL
The Lenovo Thinkbook 14s Yoga ITL has 4 new symbols/shortcuts on their
F9-F11 and PrtSc keys:
F9: Has a symbol of a head with a headset, the manual says "Service key"
F10: Has a symbol of a telephone horn which has been picked up from the
receiver, the manual says: "Answer incoming calls"
F11: Has a symbol of a telephone horn which is resting on the receiver,
the manual says: "Reject incoming calls"
PrtSc: Has a symbol of a siccor and a dashed ellipse, the manual says:
"Open the Windows 'Snipping' Tool app"
This commit adds support for these 4 new hkey events.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20230819-lenovo_keys-v1-1-9d34eac88e0a@apitzsch.eu
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This adds my laptop Lenovo Yoga 7 14ACN6, with Product Name: 82N7
(from `dmidecode -t1 | grep "Product Name"`) to
the ec_trigger_quirk_dmi_table, have tested that this is required
for the YMC driver to work correctly on this model.
Signed-off-by: Swapnil Devesh <me@sidevesh.com>
Reviewed-by: Gergő Köteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/18a08a8b173.895ef3b250414.1213194126082324071@sidevesh.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
It turns out that some PCSpecialist Elimina Pro 16 M models
have "GM6BGEQ" as DMI product-name instead of "Elimina Pro 16 M",
causing the existing DMI quirk to not work on these models.
The DMI board-name is always "GM6BGEQ", so match on that instead.
Fixes: 56fec0051a69 ("ACPI: resource: Add IRQ override quirk for PCSpecialist Elimina Pro 16 M")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394#c36
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The commit 06470f7468c8 ("mac80211: add API to allow filtering frames in BA sessions")
added reorder_buf_filtered to mark frames filtered by firmware, and it
can only work correctly if hw.max_rx_aggregation_subframes <= 64 since
it stores the bitmap in a u64 variable.
However, new HE or EHT devices can support BlockAck number up to 256 or
1024, and then using a higher subframe index leads UBSAN warning:
UBSAN: shift-out-of-bounds in net/mac80211/rx.c:1129:39
shift exponent 215 is too large for 64-bit type 'long long unsigned int'
Call Trace:
<IRQ>
dump_stack_lvl+0x48/0x70
dump_stack+0x10/0x20
__ubsan_handle_shift_out_of_bounds+0x1ac/0x360
ieee80211_release_reorder_frame.constprop.0.cold+0x64/0x69 [mac80211]
ieee80211_sta_reorder_release+0x9c/0x400 [mac80211]
ieee80211_prepare_and_rx_handle+0x1234/0x1420 [mac80211]
ieee80211_rx_list+0xaef/0xf60 [mac80211]
ieee80211_rx_napi+0x53/0xd0 [mac80211]
Since only old hardware that supports <=64 BlockAck uses
ieee80211_mark_rx_ba_filtered_frames(), limit the use as it is, so add a
WARN_ONCE() and comment to note to avoid using this function if hardware
capability is not suitable.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20230818014004.16177-1-pkshih@realtek.com
[edit commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Jakub asked if I'd be willing to be the maintainer of the macsec code
and review the driver code adding macsec offload, so let's add the
corresponding entry.
The keyword lines are meant to catch selftests and patches adding HW
offload support to other drivers.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
