summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-06-06sched: Fix the relax_domain_level boot parameterDimitri Sivanich
It does not get processed because sched_domain_level_max is 0 at the time that setup_relax_domain_level() is run. Simply accept the value as it is, as we don't know the value of sched_domain_level_max until sched domain construction is completed. Fix sched_relax_domain_level in cpuset. The build_sched_domain() routine calls the set_domain_attribute() routine prior to setting the sd->level, however, the set_domain_attribute() routine relies on the sd->level to decide whether idle load balancing will be off/on. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120605184436.GA15668@sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06char/agp: add another Ironlake host bridgeEugeni Dodonov
This seems to come on Gigabyte H55M-S2V and was discovered through the https://bugs.freedesktop.org/show_bug.cgi?id=50381 debugging. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50381 Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-06perf/x86: Update SNB PEBS constraintsPeter Zijlstra
Afaict there's no need to (incompletely) iterate the MEM_UOPS_RETIRED.* umask state. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1338884803.28282.153.camel@twins Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06perf/x86: Enable/Add IvyBridge hardware supportPeter Zijlstra
Implement rudimentary IVB perf support. The SDM states its identical to SNB with exception of the exact event tables, but a quick look suggests they're similar enough. Also mark SNB-EP as broken for now. Requested-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338884803.28282.153.camel@twins Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06perf/x86: Implement cycles:p for SNB/IVBPeter Zijlstra
Now that there's finally a chip with working PEBS (IvyBridge), we can enable the hardware and implement cycles:p for SNB/IVB. Cc: Stephane Eranian <eranian@google.com> Requested-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338884803.28282.153.camel@twins Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06perf/x86: Fix Intel shared extra MSR allocationPeter Zijlstra
Zheng Yan reported that event group validation can wreck event state when Intel extra_reg allocation changes event state. Validation shouldn't change any persistent state. Cloning events in validate_{event,group}() isn't really pretty either, so add a few special cases to avoid modifying the event state. The code is restructured to minimize the special case impact. Reported-by: Zheng Yan <zheng.z.yan@linux.intel.com> Acked-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338903031.28282.175.camel@twins Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06sched: Validate assumptions in sched_init_numa()Peter Zijlstra
Add some code to validate assumptions we're making and output warnings if they are not. If this trigger we want to know about it. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Alex Shi <lkml.alex@gmail.com> Link: http://lkml.kernel.org/n/tip-6uc3wk5s9udxtdl9cnku0vtt@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06sched: Always initialize cpu-powerPeter Zijlstra
Often when we run into mis-shapen topologies the balance iteration fails to update the cpu power properly and we'll end up in /0 traps. Always initialize the cpu-power to a semi-sane value so that we can at least boot the machine, even if the load-balancer might not function correctly. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-3lbhyj25sr169ha7z3qht5na@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06sched: Fix domain iterationPeter Zijlstra
Weird topologies can lead to asymmetric domain setups. This needs further consideration since these setups are typically non-minimal too. For now, make it work by adding an extra mask selecting which CPUs are allowed to iterate up. The topology that triggered it is the one from David Rientjes: 10 20 20 30 20 10 20 20 20 20 10 20 30 20 20 10 resulting in boxes that wouldn't even boot. Reported-by: David Rientjes <rientjes@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-3p86l9cuaqnxz7uxsojmz5rm@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06sched/rt: Fix lockdep annotation within find_lock_lowest_rq()Peter Zijlstra
Roland Dreier reported spurious, hard to trigger lockdep warnings within the scheduler - without any real lockup. This bit gives us the right clue: > [89945.640512] [<ffffffff8103fa1a>] double_lock_balance+0x5a/0x90 > [89945.640568] [<ffffffff8104c546>] push_rt_task+0xc6/0x290 if you look at that code you'll find the double_lock_balance() in question is the one in find_lock_lowest_rq() [yay for inlining]. Now find_lock_lowest_rq() has a bug.. it fails to use double_unlock_balance() in one exit path, if this results in a retry in push_rt_task() we'll call double_lock_balance() again, at which point we'll run into said lockdep confusion. Reported-by: Roland Dreier <roland@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1337282386.4281.77.camel@twins Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06sched/numa: Load balance between remote nodesAlex Shi
Commit cb83b629b ("sched/numa: Rewrite the CONFIG_NUMA sched domain support") removed the NODE sched domain and started checking if the node distance in SLIT table is farther than REMOTE_DISTANCE, if so, it will lose the load balance chance at exec/fork/wake_affine points. But actually, even the node distance is farther than REMOTE_DISTANCE. Modern CPUs also has QPI like connections, which ensures that memory access is not too slow between nodes. So the above change in behavior on NUMA machine causes a performance regression on various benchmarks: hackbench, tbench, netperf, oltp, etc. This patch will recover the scheduler behavior to old mode on all my Intel platforms: NHM EP/EX, WSM EP, SNB EP/EP4S, and thus fixes the perfromance regressions. (all of them just have 2 kinds distance, 10, 21) Signed-off-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338965571-9812-1-git-send-email-alex.shi@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06sched/x86: Calculate booted cores after construction of sibling_maskKamalesh Babulal
Commit 316ad248307fb ("sched/x86: Rewrite set_cpu_sibling_map()") broke the booted_cores accounting. The problem is that the booted_cores accounting needs all the sibling links set up. So restore the second loop and add a comment as to why its needed. On qemu booted with -smp sockets=1,cores=2,threads=2; Before: $ grep cores /proc/cpuinfo cpu cores : 2 cpu cores : 1 cpu cores : 4 cpu cores : 3 With the patch: $ grep cores /proc/cpuinfo cpu cores : 2 cpu cores : 2 cpu cores : 2 cpu cores : 2 Reported-by: Prarit Bhargava <prarit@redhat.com> Reported-by: Borislav Petkov <bp@amd64.org> Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120531073738.GH7511@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06mmc: mxs-mmc: Move of_match_table out of CONFIG_PMMarek Vasut
Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06mmc: sdhci-s3c: pass IRQF ONESHOT to request threaded irqHeiko Stübner
Fix a boot regression in existing kernels causing: genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq XXX caused by 1c6c6952 (genirq: Reject bogus threaded irq requests). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06mmc: core: return an error on suspend if mmc_deselect_cards failsJaehoon Chung
When mmc_host is not spi mode, mmc/sd is doing mmc_deselect_cards(). mmc_deselect_cards could be returned error. If returned error, we can know something wrong when enter suspend. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06mmc: omap: Fix broken reg_shift initializationTony Lindgren
Commit fa550189 (mmc: core: Prevent eMMC VCC supply to be cut from late init) slightly affected timings for how things are done for the omap MMC driver causing the MMC cards not getting detected any longer. Turns out this was caused by buggy reg_shift initialization in the omap MMC driver that was happening after mmc_add_host() was being called. Fix this by initializing reg_shift before mmc_add_host() is called. Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06mmc: omap: Fix NULL pointer dereference if mmc_omap_new_slot() failsTony Lindgren
Commit b01a4f1c (mmc: omap: convert to per instance workqueue) initializes the workqueue too late causing the following: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 Not tainted (3.4.0-08218-gb48b2c3 #158) PC is at __queue_work+0x8/0x46c LR is at queue_work_on+0x38/0x40 pc : [<c005bb4c>] lr : [<c005c00c>] psr: 60000193 sp : c0691e1c ip : 00000000 fp : c07374ac r10: c7aae400 r9 : c0395700 r8 : 00000100 r7 : c0691e70 r6 : 00000000 r5 : 00000000 r4 : c7aae440 r3 : 00000001 r2 : c7aae440 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 00c5387d Table: 80004000 DAC: 00000017 Process swapper/0 (pid: 0, stack limit = 0xc06902f8) Stack: (0xc0691e1c to 0xc0692000) Fix this by initializing the workqueue before mmc_omap_remove_slot() get called. Tested on n770, looks like n800 at least still has some other issue with MMC. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06mmc: omap: Fix a section warning regressionTony Lindgren
Commit b6e0703b (mmc: omap: make it behave well as a module) made some __devinit changes but missed one function causing a section warning: WARNING: vmlinux.o(.devinit.text+0x8604): Section mismatch in reference from the function mmc_omap_probe) The function __devinit mmc_omap_probe() references a function __init mmc_omap_new_slot(). Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06mmc: dw_mmc: correct the calculation for CLKDIVSeungwon Jeon
In case of "host->bus_hz < slot->clock", divider value is miscalculated. And clock divider register value is multiple of 2. If calculated divider value is odd number, result can be over-clocking. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06mmc: dw_mmc: fix incorrect setting of host->data of NULLSeungwon Jeon
Setting host->data to NULL is incorrect sequence in dw_mci_command_complete. This early setting makes the skip of dma_unmap_sg in dw_mci_dma_cleanup. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06mmc: dw_mmc: fix the IDMAC sw resetSeungwon Jeon
IDMAC may not be cleaned in driver probe if it has been already used in boot time. So IDMAC needs sw reset newly. And DMA interface reset precedes the internal DMAC reset. Additionally SDMMC_IDMAC_SWRESET is replaced with magic code. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06mmc: dw_mmc: fix the transmission handling in IDMACSeungwon Jeon
DTO interrupt can be later than transmit interrupt(IDMAC) in case of write. Current handling of IDMAC interrupt sets EVENT_DATA_COMPLETE as well as EVENT_XFER_COMPLETE regardless of DTO rising. This makes the current request finish in tasklet and permits the next request even though current data transfer is still in progress. As a result, sequence is broken and lock-up happens. Setting EVENT_DATA_COMPLETE is not proper after IDMAC interrupt. It should be taken after DTO interrupt is generated. Reported-by: Dmitry Shmidt <dimitrysh@android.com> Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Hyeonsu Kim <hyeonsu.kim@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06m68k: Use generic strncpy_from_user(), strlen_user(), and strnlen_user()Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org>
2012-06-06mmc: sdio: fix setting card data bus width as 4-bitYong Ding
SDIO_CCCR_IF[1:0] in SDIO card is used for card data bus width setting as below: 00b: 1-bit bus 01b: Reserved 10b: 4-bit bus 11b: 8-bit bus (only for embedded SDIO) And sdio_enable_wide is for setting data bus width as 4-bit. But currently, it first reads the register, second OR' 1b with SDIO_CCCR_IF[1], and then writes it back. As we can see, this is based on such assumption that the SDIO_CCCR_IF[0] is always 0. Apparently, this is not right. Signed-off-by: Yong Ding <yongd@marvell.com> Acked-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06mmc: atmel-mci: fix burst/chunk size modificationNicolas Ferre
The use of DMA slave config operation requires that the burst size (aka chunk size) is specified through this interface. Modify atmel-mci slave driver to use this specification on its side. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06x86/ioapic: Fix NULL pointer dereference on CPU hotplug after disabling irqsTomoki Sekiyama
In current Linux, percpu variable `vector_irq' is not cleared on offlined cpus while disabling devices' irqs. If the cpu that has the disabled irqs in vector_irq is hotplugged, __setup_vector_irq() hits invalid irq vector and may crash. This bug can be reproduced as following; # echo 0 > /sys/devices/system/cpu/cpu7/online # modprobe -r some_driver_using_interrupts # vector_irq@cpu7 uncleared # echo 1 > /sys/devices/system/cpu/cpu7/online # kernel may crash This patch fixes this bug by clearing vector_irq in __clear_irq_vector() even if the cpu is offlined. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: yrl.pp-manager.tt@hitachi.com Cc: ltc-kernel@ml.yrl.intra.hitachi.co.jp Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Alexander Gordeev <agordeev@redhat.com> Link: http://lkml.kernel.org/r/4FC340BE.7080101@hitachi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06x86/reboot: Fix a warning message triggered by stop_other_cpus()Feng Tang
When rebooting our 24 CPU Westmere servers with 3.4-rc6, we always see this warning msg: Restarting system. machine restart ------------[ cut here ]------------ WARNING: at arch/x86/kernel/smp.c:125 native_smp_send_reschedule+0x74/0xa7() Hardware name: X8DTN Modules linked in: igb [last unloaded: scsi_wait_scan] Pid: 1, comm: systemd-shutdow Not tainted 3.4.0-rc6+ #22 Call Trace: <IRQ> [<ffffffff8102a41f>] warn_slowpath_common+0x7e/0x96 [<ffffffff8102a44c>] warn_slowpath_null+0x15/0x17 [<ffffffff81018cf7>] native_smp_send_reschedule+0x74/0xa7 [<ffffffff810561c1>] trigger_load_balance+0x279/0x2a6 [<ffffffff81050112>] scheduler_tick+0xe0/0xe9 [<ffffffff81036768>] update_process_times+0x60/0x70 [<ffffffff81062f2f>] tick_sched_timer+0x68/0x92 [<ffffffff81046e33>] __run_hrtimer+0xb3/0x13c [<ffffffff81062ec7>] ? tick_nohz_handler+0xd0/0xd0 [<ffffffff810474f2>] hrtimer_interrupt+0xdb/0x198 [<ffffffff81019a35>] smp_apic_timer_interrupt+0x81/0x94 [<ffffffff81655187>] apic_timer_interrupt+0x67/0x70 <EOI> [<ffffffff8101a3c4>] ? default_send_IPI_mask_allbutself_phys+0xb4/0xc4 [<ffffffff8101c680>] physflat_send_IPI_allbutself+0x12/0x14 [<ffffffff81018db4>] native_nmi_stop_other_cpus+0x8a/0xd6 [<ffffffff810188ba>] native_machine_shutdown+0x50/0x67 [<ffffffff81018926>] machine_shutdown+0xa/0xc [<ffffffff8101897e>] native_machine_restart+0x20/0x32 [<ffffffff810189b0>] machine_restart+0xa/0xc [<ffffffff8103b196>] kernel_restart+0x47/0x4c [<ffffffff8103b2e6>] sys_reboot+0x13e/0x17c [<ffffffff8164e436>] ? _raw_spin_unlock_bh+0x10/0x12 [<ffffffff810fcac9>] ? bdi_queue_work+0xcf/0xd8 [<ffffffff810fe82f>] ? __bdi_start_writeback+0xae/0xb7 [<ffffffff810e0d64>] ? iterate_supers+0xa3/0xb7 [<ffffffff816547a2>] system_call_fastpath+0x16/0x1b ---[ end trace 320af5cb1cb60c5b ]--- The root cause seems to be the default_send_IPI_mask_allbutself_phys() takes quite some time (I measured it could be several ms) to complete sending NMIs to all the other 23 CPUs, and for HZ=250/1000 system, the time is long enough for a timer interrupt to happen, which will in turn trigger to kick load balance to a stopped CPU and cause this warning in native_smp_send_reschedule(). So disabling the local irq before stop_other_cpu() can fix this problem (tested 25 times reboot ok), and it is fine as there should be nobody caring the timer interrupt in such reboot stage. The latest 3.4 kernel slightly changes this behavior by sending REBOOT_VECTOR first and only send NMI_VECTOR if the REBOOT_VCTOR fails, and this patch is still needed to prevent the problem. Signed-off-by: Feng Tang <feng.tang@intel.com> Acked-by: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120530231541.4c13433a@feng-i7 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06x86/intel/moorestown: Change intel_scu_devices_create() to __devinitSebastian Andrzej Siewior
The allmodconfig hits: WARNING: vmlinux.o(.text+0x6553d): Section mismatch in reference from the function intel_scu_devices_create() to the function .devinit.text: spi_register_board_info() [...] This patch marks intel_scu_devices_create() as devinit because it only calls a devinit function, spi_register_board_info(). Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Alan Cox <alan@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Link: http://lkml.kernel.org/r/20120531212025.GA8519@breakpoint.cc Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06x86/numa: Set numa_nodes_parsed at acpi_numa_memory_affinity_init()Yasuaki Ishimatsu
When hot-adding a CPU, the system outputs following messages since node_to_cpumask_map[2] was not allocated memory. Booting Node 2 Processor 32 APIC 0xc0 node_to_cpumask_map[2] NULL Pid: 0, comm: swapper/32 Tainted: G A 3.3.5-acd #21 Call Trace: [<ffffffff81048845>] debug_cpumask_set_cpu+0x155/0x160 [<ffffffff8105e28a>] ? add_timer_on+0xaa/0x120 [<ffffffff8150665f>] numa_add_cpu+0x1e/0x22 [<ffffffff815020bb>] identify_cpu+0x1df/0x1e4 [<ffffffff815020d6>] identify_econdary_cpu+0x16/0x1d [<ffffffff81504614>] smp_store_cpu_info+0x3c/0x3e [<ffffffff81505263>] smp_callin+0x139/0x1be [<ffffffff815052fb>] start_secondary+0x13/0xeb The reason is that the bit of node 2 was not set at numa_nodes_parsed. numa_nodes_parsed is set by only acpi_numa_processor_affinity_init / acpi_numa_x2apic_affinity_init. Thus even if hot-added memory which is same PXM as hot-added CPU is written in ACPI SRAT Table, if the hot-added CPU is not written in ACPI SRAT table, numa_nodes_parsed is not set. But according to ACPI Spec Rev 5.0, it says about ACPI SRAT table as follows: This optional table provides information that allows OSPM to associate processors and memory ranges, including ranges of memory provided by hot-added memory devices, with system localities / proximity domains and clock domains. It means that ACPI SRAT table only provides information for CPUs present at boot time and for memory including hot-added memory. So hot-added memory is written in ACPI SRAT table, but hot-added CPU is not written in it. Thus numa_nodes_parsed should be set by not only acpi_numa_processor_affinity_init / acpi_numa_x2apic_affinity_init but also acpi_numa_memory_affinity_init for the case. Additionally, if system has cpuless memory node, acpi_numa_processor_affinity_init / acpi_numa_x2apic_affinity_init cannot set numa_nodes_parseds since these functions cannot find cpu description for the node. In this case, numa_nodes_parsed needs to be set by acpi_numa_memory_affinity_init. Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: liuj97@gmail.com Cc: kosaki.motohiro@gmail.com Link: http://lkml.kernel.org/r/4FCC2098.4030007@jp.fujitsu.com [ merged it ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06x86/gart: Fix kmemleak warningXiaotian Feng
aperture_64.c now is using memblock, the previous kmemleak_ignore() for alloc_bootmem() should be removed then. Otherwise, with kmemleak enabled, kernel will throw warnings like: [ 0.000000] kmemleak: Trying to color unknown object at 0xffff8800c4000000 as Black [ 0.000000] Pid: 0, comm: swapper/0 Not tainted 3.5.0-rc1-next-20120605+ #130 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff811b27e6>] paint_ptr+0x66/0xc0 [ 0.000000] [<ffffffff816b90fb>] kmemleak_ignore+0x2b/0x60 [ 0.000000] [<ffffffff81ef7bc0>] kmemleak_init+0x217/0x2c1 [ 0.000000] [<ffffffff81ed2b97>] start_kernel+0x32d/0x3eb [ 0.000000] [<ffffffff81ed25e4>] ? repair_env_string+0x5a/0x5a [ 0.000000] [<ffffffff81ed2356>] x86_64_start_reservations+0x131/0x135 [ 0.000000] [<ffffffff81ed2120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81ed245c>] x86_64_start_kernel+0x102/0x111 [ 0.000000] kmemleak: Early log backtrace: [ 0.000000] [<ffffffff816b911b>] kmemleak_ignore+0x4b/0x60 [ 0.000000] [<ffffffff81ee6a38>] gart_iommu_hole_init+0x3e7/0x547 [ 0.000000] [<ffffffff81edb20b>] pci_iommu_alloc+0x44/0x6f [ 0.000000] [<ffffffff81ee81ad>] mem_init+0x19/0xec [ 0.000000] [<ffffffff81ed2a54>] start_kernel+0x1ea/0x3eb [ 0.000000] [<ffffffff81ed2356>] x86_64_start_reservations+0x131/0x135 [ 0.000000] [<ffffffff81ed245c>] x86_64_start_kernel+0x102/0x111 [ 0.000000] [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com> Cc: Xiaotian Feng <xtfeng@gmail.com> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1338922831-2847-1-git-send-email-xtfeng@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06mmc: atmel-mci: fix data timeout issueLudovic Desroches
The data timeout timer was configured after mmc_add_host call. So, with bad timings, it was possible to have a mmc request causing mod_timer call on a non setup timer. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06mmc: sdhci: Use DBG() instead of pr_warning() on large timeoutChris Ball
3bdc9ba892d6 ("mmc: use really long write timeout to deal with crappy cards") in 3.4 increased the write timeout that the core sends to host drivers to 3 seconds. This makes sdhci's "requested timeout too large" warning trigger on every write; so, change this pr_warning() to a DBG(). Reported-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06spinlock: Indicate that a lockup is only suspectedChristian Borntraeger
On an over-committed KVM system we got a: "BUG: spinlock lockup on CPU#2, swapper/2/0" message on the heavily contended virtio blk spinlock. While we might want to reconsider the locking of virtio-blk (lock is held while switching to the host) this patch tries to make the message clearer: the lockup is only suspected. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338283124-7063-1-git-send-email-borntraeger@de.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06x86: mce: Add the dropped timer interval init backThomas Gleixner
commit 82f7af09 ("x86/mce: Cleanup timer mess) dropped the initialization of the per cpu timer interval. Duh :( Restore the previous behaviour. Reported-by: Chen Gong <gong.chen@linux.intel.com> Cc: bp@amd64.org Cc: tony.luck@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-06-06Merge branch 'core/debug' into core/urgentIngo Molnar
Merge two debugging patchlets that were waiting for preparatory commits to hit upstream. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06ARM: OMAP2+: Fix compile for CONFIG_TIDSPBRIDGE platform init codeTony Lindgren
Commit 7f28427b (ARM: OMAP2+: Move omap_dsp_reserve_sdram_memblock() to mach-omap2) moved DSP platform init code, but failed to include memblock.h causing: arch/arm/mach-omap2/dsp.c: In function 'omap_dsp_reserve_sdram_memblock': arch/arm/mach-omap2/dsp.c:58: error: implicit declaration of function 'arm_memblock_steal' Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-06ARM: OMAP3: Fix omap3_l3_block_irq warning when CONFIG_BUG is not setTony Lindgren
Otherwise we will get: arch/arm/mach-omap2/omap_l3_smx.c: In function ‘omap3_l3_block_irq’: arch/arm/mach-omap2/omap_l3_smx.c:156: warning: unused variable ‘address’ arch/arm/mach-omap2/omap_l3_smx.c:155: warning: unused variable ‘multi’ arch/arm/mach-omap2/omap_l3_smx.c:154: warning: unused variable ‘initid’ arch/arm/mach-omap2/omap_l3_smx.c:153: warning: unused variable ‘code’ arch/arm/mach-omap2/omap_l3_smx.c: At top level: arch/arm/mach-omap2/omap_l3_smx.c:68: warning: ‘omap3_l3_code_string’ defined but not used arch/arm/mach-omap2/omap_l3_smx.c:90: warning: ‘omap3_l3_initiator_string’ defined but not used Fix it by always showing the L3 error. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-06ARM: OMAP: Fix MMC_OMAP build when only MMC_OMAP_HS is selectedTony Lindgren
If CONFIG_MMC_OMAP is not set and CONFIG_MMC_OMAP_HS is set, we can get error: redefinition of `omap242x_init_mmc' error. Fix it by removing MMC_OMAP_HS from MMC_OMAP ifdefs as they do not depend on each other. While at it, also prettify the formatting a bit. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-06x86/decoder: Fix bsr/bsf/jmpe decoding with operand-size prefixMasami Hiramatsu
Fix the x86 instruction decoder to decode bsr/bsf/jmpe with operand-size prefix (66h). This fixes the test case failure reported by Linus, attached below. bsf/bsr/jmpe have a special encoding. Opcode map in Intel Software Developers Manual vol2 says they have TZCNT/LZCNT variants if it has F3h prefix. However, there is no information if it has other 66h or F2h prefixes. Current instruction decoder supposes that those are bad instructions, but it actually accepts at least operand-size prefixes. H. Peter Anvin further explains: " TZCNT/LZCNT are F3 + BSF/BSR exactly because the F2 and F3 prefixes have historically been no-ops with most instructions. This allows software to unconditionally use the prefixed versions and get TZCNT/LZCNT on the processors that have them if they don't care about the difference. " This fixes errors reported by test_get_len: Warning: arch/x86/tools/test_get_len found difference at <em_bsf>:ffffffff81036d87 Warning: ffffffff81036de5: 66 0f bc c2 bsf %dx,%ax Warning: objdump says 4 bytes, but insn_get_length() says 3 Warning: arch/x86/tools/test_get_len found difference at <em_bsr>:ffffffff81036ea6 Warning: ffffffff81036f04: 66 0f bd c2 bsr %dx,%ax Warning: objdump says 4 bytes, but insn_get_length() says 3 Warning: decoded and checked 13298882 instructions with 2 warnings Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <yrl.pp-manager.tt@hitachi.com> Link: http://lkml.kernel.org/r/20120604150911.22338.43296.stgit@localhost.localdomain Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf fixes from Arnaldo Carvalho de Melo: * Endianness fixes from Jiri Olsa * Fixes for make perf tarball * Fix for DSO name in perf script callchains, from David Ahern * Segfault fixes for perf top --callchain, from Namhyung Kim * Minor function result fixes from Srikar Dronamraju * Add missing 3rd ioctl parameter, from Namhyung Kim * Fix pager usage in minimal embedded systems, from Avik Sil Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06x86/mce: Fix the MCE poll timer logicChen Gong
In commit 82f7af09 ("x86/mce: Cleanup timer mess), Thomas just forgot the "/ 2" there while cleaning up. Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: bp@amd64.org Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/1338863702-9245-1-git-send-email-gong.chen@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-05ixgbe: IXGBE_RXD_STAT_VP set even with Rx stripping enabledJohn Fastabend
The hardware bit IXGBE_RXD_STAT_VP appears to be set even when Rx stripping is disabled. This results in passing frames up the stack which do not have the 802.1Q tag stripped but have the tci bits set as if it was. Working around this with a check for the feature flag bit. I would welcome any better ideas or a pointer to exactly which bits in the hardware register need to be cleared to get the IXGBE_RXD_STAT_VP bit to be set per data sheet. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-05ixgbe: fix_features rxvlan is independent of DCB and needs to be setJohn Fastabend
DCB can be used independent of if RX VLAN stripping is enabled or disabled so remove erroneous check. Also enable or disable VLAN stripping when features are applied so hardware and feature flags are in sync. CC: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-05e1000e: test for valid check_reset_block function pointerBruce Allan
commit 44abd5c12767a8c567dc4e45fd9aec3b13ca85e0 introduced NULL pointer dereferences when attempting to access the check_reset_block function pointer on 8257x and 80003es2lan non-copper devices. This fix should be applied back through 3.4. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-06[SCSI] mpt2sas: Fix unsafe using smp_processor_id() in preemptiblenagalakshmi.nandigama@lsi.com
When CONFIG_DEBUG_PREEMPT is enabled, bug is observed in the smp_processor_id(). This is because smp_processor_id() is not called in preempt safe condition. To fix this issue, use raw_smp_processor_id instead of smp_processor_id. Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> CC: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-06-05NFS: Fix a commit bugTrond Myklebust
The new commit code fails to copy the verifier into the wb_verf field of _all_ the nfs_page structures; it only copies it into the first entry. The consequence is that most requests end up failing to match in nfs_commit_release. Fix is to copy the verifier into the req->wb_verf field in nfs_write_completion. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
2012-06-05Merge tag 'please-pull-mce' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull MCE regression fix from Tony Luck: "Typo/thinko in a cleanup caused a semantic change. Fix it." * tag 'please-pull-mce' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: x86/mce: Fix the MCE poll timer logic
2012-06-05video: bfin_adv7393fb: Convert to kstrtouint_from_userEmil Goode
This patch removes a call to the deprecated simple_strtoul function and simplifies the code by replacing two function calls with one call to kstrtouint_from_user. -Simplify the adv7393_write_proc function by replacing the simple_strtoul and copy_from_user calls with one call to kstrtouint_from_user. -Change the count parameter from unsigned long to size_t as this is the type that the kstrtouint_from_user function expects. (size_t is what will be passed to the adv7393_write_proc function by the proc write handler function proc_file_write anyway) Signed-off-by: Emil Goode <emilgoode@gmail.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-06-05Merge tag 'omapdss-for-3.5-rc2' of git://gitorious.org/linux-omap-dss2/linux ↵Florian Tobias Schandinat
into fbdev-for-linus Small fixes for omapdss driver. Most importantly, fixes a build problem when debugfs or omapdss debug support is turned off, and fixes a suspend related crash.
2012-06-05Merge branch 'fixes-for-linus' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull arm CMA fix from Marek Szyprowski: "This removes the ARMv6+ CMA dependency and lets one use old, well- tested dma-mapping implementation also on ARMv6+ systems without the need to use EXPERIMENTAL stuff." Russell King complained (rightly) about the experimental feature being forced on by the ARM config. Here CMA is "continuous memory allocator", not "cross-memory attach". We really neet to stop using insane TLA's for things that aren't big industry standards. * 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: remove unconditional dependency on CMA
generated by cgit (git 2.34.1) at 2025-09-12 09:38:23 +0000