summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-16cifs: create a helper to find a writeable handle by path nameRonnie Sahlberg
rename() takes a path for old_file and in SMB2 we used to just create a compound for create(old_path)/rename/close(). If we already have a writable handle we can avoid the create() and close() altogether and just use the existing handle. For this situation, as we avoid doing the create() we also avoid triggering an oplock break for the existing handle. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-16cifs: remove set but not used variablesYueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: fs/cifs/file.c: In function cifs_lock: fs/cifs/file.c:1696:24: warning: variable cinode set but not used [-Wunused-but-set-variable] fs/cifs/file.c: In function cifs_write: fs/cifs/file.c:1765:23: warning: variable cifs_sb set but not used [-Wunused-but-set-variable] fs/cifs/file.c: In function collect_uncached_read_data: fs/cifs/file.c:3578:20: warning: variable tcon set but not used [-Wunused-but-set-variable] 'cinode' is never used since introduced by commit 03776f4516bc ("CIFS: Simplify byte range locking code") 'cifs_sb' is not used since commit cb7e9eabb2b5 ("CIFS: Use multicredits for SMB 2.1/3 writes"). 'tcon' is not used since commit d26e2903fc10 ("smb3: fix bytes_read statistics") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-16smb3: Incorrect size for netname negotiate contextSteve French
It is not null terminated (length was off by two). Also see similar change to Samba: https://gitlab.com/samba-team/samba/merge_requests/666 Reported-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-16cifs: remove unused variablezhengbin
In smb3_punch_hole, variable cifsi set but not used, remove it. In cifs_lock, variable netfid set but not used, remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-16cifs: remove redundant assignment to variable rcColin Ian King
Variable rc is being initialized with a value that is never read and rc is being re-assigned a little later on. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-16smb3: add missing flag definitionsSteve French
SMB3 and 3.1.1 added two additional flags including the priority mask. Add them to our protocol definitions in smb2pdu.h. See MS-SMB2 2.2.1.2 Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-09-16cifs: add passthrough for smb2 setinfoRonnie Sahlberg
Add support to send smb2 set-info commands from userspace. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Paulo Alcantara <palcantara@suse.de>
2019-09-16cifs: prepare SMB2_Flush to be usable in compoundsRonnie Sahlberg
Create smb2_flush_init() and smb2_flush_free() so we can use the flush command in compounds. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-16cifs: allow chmod to set mode bits using special sidSteve French
When mounting with "modefromsid" set mode bits (chmod) by adding ACE with special SID (S-1-5-88-3-<mode>) to the ACL. Subsequent patch will fix setting default mode on file create and mkdir. See See e.g. https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/hh509017(v=ws.10) Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-16cifs: get mode bits from special sid on statSteve French
When mounting with "modefromsid" retrieve mode bits from special SID (S-1-5-88-3) on stat. Subsequent patch will fix setattr (chmod) to save mode bits in S-1-5-88-3-<mode> Note that when an ACE matching S-1-5-88-3 is not found, we default the mode to an approximation based on the owner, group and everyone permissions (as with the "cifsacl" mount option). See See e.g. https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/hh509017(v=ws.10) Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-16fs: cifs: cifsssmb: remove redundant assignment to variable retColin Ian King
The variable ret is being initialized however this is never read and later it is being reassigned to a new value. The initialization is redundant and hence can be removed. Addresses-Coverity: ("Unused Value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-16cifs: fix a comment for the timeouts when sending echosRonnie Sahlberg
Clarify a trivial comment Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-16IB/mlx5: Use the original address for the page during free_pagesDanit Goldberg
The removal of 'buffer' in the patch below caused free_page() to use a value that had been offset since the wqe pointer is adjusted while the routine runs. The current implementation of free_pages() rounds down to a pfn, discarding the adjustment, but this is not the right way to use the API. Preserve the initial value and use it for free_page(). Fixes: 0f51427bd097 ("RDMA/mlx5: Cleanup WQE page fault handler") Link: https://lore.kernel.org/r/20190916064818.19823-2-leon@kernel.org Signed-off-by: Danit Goldberg <danitg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-16Merge tag 'core-process-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd/waitid updates from Christian Brauner: "This contains two features and various tests. First, it adds support for waiting on process through pidfds by adding the P_PIDFD type to the waitid() syscall. This completes the basic functionality of the pidfd api (cf. [1]). In the meantime we also have a new adition to the userspace projects that make use of the pidfd api. The qt project was nice enough to send a mail pointing out that they have a pr up to switch to the pidfd api (cf. [2]). Second, this tag contains an extension to the waitid() syscall to make it possible to wait on the current process group in a race free manner (even though the actual problem is very unlikely) by specifing 0 together with the P_PGID type. This extension traces back to a discussion on the glibc development mailing list. There are also a range of tests for the features above. Additionally, the test-suite which detected the pidfd-polling race we fixed in [3] is included in this tag" [1] https://lwn.net/Articles/794707/ [2] https://codereview.qt-project.org/c/qt/qtbase/+/108456 [3] commit b191d6491be6 ("pidfd: fix a poll race when setting exit_state") * tag 'core-process-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: waitid: Add support for waiting for the current process group tests: add pidfd poll tests tests: move common definitions and functions into pidfd.h pidfd: add pidfd_wait tests pidfd: add P_PIDFD to waitid()
2019-09-16f2fs: fix to add missing F2FS_IO_ALIGNED() conditionChao Yu
In f2fs_allocate_data_block(), we will reset fio.retry for IO alignment feature instead of IO serialization feature. In addition, spread F2FS_IO_ALIGNED() to check IO alignment feature status explicitly. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-09-16f2fs: fix to fallback to buffered IO in IO aligned modeChao Yu
In LFS mode, we allow OPU for direct IO, however, we didn't consider IO alignment feature, so direct IO can trigger unaligned IO, let's just fallback to buffered IO to keep correct IO alignment semantics in all places. Fixes: f847c699cff3 ("f2fs: allow out-place-update for direct IO in LFS mode") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-09-16f2fs: fix to handle error path correctly in f2fs_map_blocksChao Yu
In f2fs_map_blocks(), we should bail out once __allocate_data_block() failed. Fixes: f847c699cff3 ("f2fs: allow out-place-update for direct IO in LFS mode") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-09-16f2fs: fix extent corrupotion during directIO in LFS modeChao Yu
In LFS mode, por_fsstress testcase reports a bug as below: [ASSERT] (fsck_chk_inode_blk: 931) --> ino: 0x12fe has wrong ext: [pgofs:142, blk:215424, len:16] Since commit f847c699cff3 ("f2fs: allow out-place-update for direct IO in LFS mode"), we start to allow OPU mode for direct IO, however, we missed to update extent cache in __allocate_data_block(), finally, it cause extent field being inconsistent with physical block address, fix it. Fixes: f847c699cff3 ("f2fs: allow out-place-update for direct IO in LFS mode") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-09-16f2fs: check all the data segments against all node onesSurbhi Palande
As a part of the sanity checking while mounting, distinct segment number assignment to data and node segments is verified. Fixing a small bug in this verification between node and data segments. We need to check all the data segments with all the node segments. Fixes: 042be0f849e5f ("f2fs: fix to do sanity check with current segment number") Signed-off-by: Surbhi Palande <csurbhi@gmail.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-09-16f2fs: Add a small clarification to CONFIG_FS_F2FS_FS_SECURITYLockywolf
Signed-off-by: Lockywolf <lockywolf@gmail.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-09-16f2fs: fix inode rwsem regressionGoldwyn Rodrigues
This is similar to 942491c9e6d6 ("xfs: fix AIM7 regression") Apparently our current rwsem code doesn't like doing the trylock, then lock for real scheme. So change our read/write methods to just do the trylock for the RWF_NOWAIT case. We don't need a check for IOCB_NOWAIT and !direct-IO because it is checked in generic_write_checks(). Fixes: b91050a80cec ("f2fs: add nowait aio support") Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-09-16f2fs: fix to avoid accessing uninitialized field of inode page in is_alive()Chao Yu
If inode is newly created, inode page may not synchronize with inode cache, so fields like .i_inline or .i_extra_isize could be wrong, in below call path, we may access such wrong fields, result in failing to migrate valid target block. Thread A Thread B - f2fs_create - f2fs_add_link - f2fs_add_dentry - f2fs_init_inode_metadata - f2fs_add_inline_entry - f2fs_new_inode_page - f2fs_put_page : inode page wasn't updated with inode cache - gc_data_segment - is_alive - f2fs_get_node_page - datablock_addr - offset_in_addr : access uninitialized fields Fixes: 7a2af766af15 ("f2fs: enhance on-disk inode structure scalability") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-09-16f2fs: avoid infinite GC loop due to stale atomic filesJaegeuk Kim
If committing atomic pages is failed when doing f2fs_do_sync_file(), we can get commited pages but atomic_file being still set like: - inmem: 0, atomic IO: 4 (Max. 10), volatile IO: 0 (Max. 0) If GC selects this block, we can get an infinite loop like this: f2fs_submit_page_bio: dev = (253,7), ino = 2, page_index = 0x2359a8, oldaddr = 0x2359a8, newaddr = 0x2359a8, rw = READ(), type = COLD_DATA f2fs_submit_read_bio: dev = (253,7)/(253,7), rw = READ(), DATA, sector = 18533696, size = 4096 f2fs_get_victim: dev = (253,7), type = No TYPE, policy = (Foreground GC, LFS-mode, Greedy), victim = 4355, cost = 1, ofs_unit = 1, pre_victim_secno = 4355, prefree = 0, free = 234 f2fs_iget: dev = (253,7), ino = 6247, pino = 5845, i_mode = 0x81b0, i_size = 319488, i_nlink = 1, i_blocks = 624, i_advise = 0x2c f2fs_submit_page_bio: dev = (253,7), ino = 2, page_index = 0x2359a8, oldaddr = 0x2359a8, newaddr = 0x2359a8, rw = READ(), type = COLD_DATA f2fs_submit_read_bio: dev = (253,7)/(253,7), rw = READ(), DATA, sector = 18533696, size = 4096 f2fs_get_victim: dev = (253,7), type = No TYPE, policy = (Foreground GC, LFS-mode, Greedy), victim = 4355, cost = 1, ofs_unit = 1, pre_victim_secno = 4355, prefree = 0, free = 234 f2fs_iget: dev = (253,7), ino = 6247, pino = 5845, i_mode = 0x81b0, i_size = 319488, i_nlink = 1, i_blocks = 624, i_advise = 0x2c In that moment, we can observe: [Before] Try to move 5084219 blocks (BG: 384508) - data blocks : 4962373 (274483) - node blocks : 121846 (110025) Skipped : atomic write 4534686 (10) [After] Try to move 5088973 blocks (BG: 384508) - data blocks : 4967127 (274483) - node blocks : 121846 (110025) Skipped : atomic write 4539440 (10) So, refactor atomic_write flow like this: 1. start_atomic_write - add inmem_list and set atomic_file 2. write() - register it in inmem_pages 3. commit_atomic_write - if no error, f2fs_drop_inmem_pages() - f2fs_commit_inmme_pages() failed : __revoked_inmem_pages() was done - f2fs_do_sync_file failed : abort_atomic_write later 4. abort_atomic_write - f2fs_drop_inmem_pages 5. f2fs_drop_inmem_pages - clear atomic_file - remove inmem_list Based on this change, when GC fails to move block in atomic_file, f2fs_drop_inmem_pages_all() can call f2fs_drop_inmem_pages(). Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-09-16net: phylink: clarify where phylink should be usedRussell King
Update the phylink documentation to make it clear that phylink is designed to be used on the MAC facing side of the link, rather than between a SFP and PHY. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16Merge branch 'bnxt_en-error-recovery-follow-up-patches'David S. Miller
Michael Chan says: ==================== bnxt_en: error recovery follow-up patches. A follow-up patchset for the recently added health and error recovery feature. The first fix is to prevent .ndo_set_rx_mode() from proceeding when reset is in progress. The 2nd fix is for the firmware coredump command. The 3rd and 4th patches update the error recovery process slightly to add a state that polls and waits for the firmware to be down. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16bnxt_en: Add a new BNXT_FW_RESET_STATE_POLL_FW_DOWN state.Vasundhara Volam
This new state is required when firmware indicates that the error recovery process requires polling for firmware state to be completely down before initiating reset. For example, firmware may take some time to collect the crash dump before it is down and ready to be reset. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16bnxt_en: Update firmware interface spec. to 1.10.0.100.Michael Chan
Some error recovery updates to the spec., among other minor changes. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16bnxt_en: Increase timeout for HWRM_DBG_COREDUMP_XX commandsVasundhara Volam
Firmware coredump messages take much longer than standard messages, so increase the timeout accordingly. Fixes: 6c5657d085ae ("bnxt_en: Add support for ethtool get dump.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16bnxt_en: Don't proceed in .ndo_set_rx_mode() when device is not in open state.Michael Chan
Check the BNXT_STATE_OPEN flag instead of netif_running() in bnxt_set_rx_mode(). If the driver is going through any reset, such as firmware reset or even TX timeout, it may not be ready to set the RX mode and may crash. The new rx mode settings will be picked up when the device is opened again later. Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16null_blk: format pr_* logs with pr_fmtAndré Almeida
Instead of writing "null_blk: " at the beginning of each pr_err/info/warn log message, format messages using pr_fmt() macro. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-16null_blk: match the type of parameter nr_devicesAndré Almeida
Since the variable nr_devices is an unsigned int, the module_param() should also use this type. Change the type so they can match. Fixes: f7c4ce890dd2 ("null_blk: validate the number of devices") Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-16null_blk: do not fail the module load with zero devicesAndré Almeida
The module load should fail only if there is something wrong with the configuration or if an error prevents it to work properly. The module should be able to be loaded with (nr_device == 0), since it will not trigger errors or be in malfunction state. Preventing loading with zero devices also breaks applications that configures this module using configfs API. Remove the nr_device check to fix this. Fixes: f7c4ce890dd2 ("null_blk: validate the number of devices") Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-16ARM: dts: dir685: Drop spi-cpol from the displayLinus Walleij
The D-Link DIR-685 had its clock polarity set as active low using the special SPI "spi-cpol" property. This is not correct: the datasheet clearly states: "Fix SCL to GND level when not in use" which is indicative that this line is active high. After a recent fix making the GPIO-based SPI driver force the clock line de-asserted at the beginning of each SPI transaction this reared its ugly head: now de-asserted was taken to mean the line should be driven high, but it should be driven low. Fix this up in the DTS file and the display works again. Link: https://lore.kernel.org/r/20190915135444.11066-1-linus.walleij@linaro.org Cc: Mark Brown <broonie@kernel.org> Fixes: 2922d1cc1696 ("spi: gpio: Add SPI_MASTER_GPIO_SS flag") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-16tcp: Add snd_wnd to TCP_INFOThomas Higdon
Neal Cardwell mentioned that snd_wnd would be useful for diagnosing TCP performance problems -- > (1) Usually when we're diagnosing TCP performance problems, we do so > from the sender, since the sender makes most of the > performance-critical decisions (cwnd, pacing, TSO size, TSQ, etc). > From the sender-side the thing that would be most useful is to see > tp->snd_wnd, the receive window that the receiver has advertised to > the sender. This serves the purpose of adding an additional __u32 to avoid the would-be hole caused by the addition of the tcpi_rcvi_ooopack field. Signed-off-by: Thomas Higdon <tph@fb.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16tcp: Add TCP_INFO counter for packets received out-of-orderThomas Higdon
For receive-heavy cases on the server-side, we want to track the connection quality for individual client IPs. This counter, similar to the existing system-wide TCPOFOQueue counter in /proc/net/netstat, tracks out-of-order packet reception. By providing this counter in TCP_INFO, it will allow understanding to what degree receive-heavy sockets are experiencing out-of-order delivery and packet drops indicating congestion. Please note that this is similar to the counter in NetBSD TCP_INFO, and has the same name. Also note that we avoid increasing the size of the tcp_sock struct by taking advantage of a hole. Signed-off-by: Thomas Higdon <tph@fb.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: mdio: switch to using gpiod_get_optional()Dmitry Torokhov
The MDIO device reset line is optional and now that gpiod_get_optional() returns proper value when GPIO support is compiled out, there is no reason to use fwnode_get_named_gpiod() that I plan to hide away. Let's switch to using more standard gpiod_get_optional() and gpiod_set_consumer_name() to keep the nice "PHY reset" label. Also there is no reason to only try to fetch the reset GPIO when we have OF node, gpiolib can fetch GPIO data from firmwares as well. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16dm: introduce DM_GET_TARGET_VERSIONMikulas Patocka
This commit introduces a new ioctl DM_GET_TARGET_VERSION. It will load a target that is specified in the "name" entry in the parameter structure and return its version. This functionality is intended to be used by cryptsetup, so that it can query kernel capabilities before activating the device. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-09-16 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Now that initial BPF backend for gcc has been merged upstream, enable BPF kselftest suite for bpf-gcc. Also fix a BE issue with access to bpf_sysctl.file_pos, from Ilya. 2) Follow-up fix for link-vmlinux.sh to remove bash-specific extensions related to recent work on exposing BTF info through sysfs, from Andrii. 3) AF_XDP zero copy fixes for i40e and ixgbe driver which caused umem headroom to be added twice, from Ciara. 4) Refactoring work to convert sock opt tests into test_progs framework in BPF kselftests, from Stanislav. 5) Fix a general protection fault in dev_map_hash_update_elem(), from Toke. 6) Cleanup to use BPF_PROG_RUN() macro in KCM, from Sami. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16RDMA/bnxt_re: Fix spelling mistake "missin_resp" -> "missing_resp"Colin Ian King
There is a spelling mistake in a literal string, fix it. Fixes: 89f81008baac ("RDMA/bnxt_re: expose detailed stats retrieved from HW") Link: https://lore.kernel.org/r/20190911092856.11146-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-16RDMA/hns: Package operations of rq inline buffer into separate functionsLijun Ou
Here packages the codes of allocating and freeing rq inline buffer in hns_roce_create_qp_common function in order to reduce the complexity. Link: https://lore.kernel.org/r/1567068102-56919-3-git-send-email-liweihang@hisilicon.com Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-16RDMA/hns: Optimize cmd init and mode selection for hip08Yixian Liu
There are two modes for mailbox command (cmd) queue, i.e., event mode and poll mode. For each mode, we use corresponding semaphores to protect the cmd queue resource competition, so called event_sem and poll_sem. During cmd init, both semaphores are initialized and poll mode is selected. Thus, there is no need to up poll_sema again in cmd_use_polling. Furthermore, there is no need to down the sema of the other side while switching mode. This patch aims to decouple the switch between event mode and poll mode of cmd. Link: https://lore.kernel.org/r/1567068102-56919-2-git-send-email-liweihang@hisilicon.com Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-16PCI: dwc: Add validation that PCIe core is set to correct modeJonathan Chocron
Some PCIe controllers can be set to either Host or EP according to some early boot FW. To make sure there is no discrepancy (e.g. FW configured the port to EP mode while the DT specifies it as a host bridge or vice versa), a check has been added for each mode. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2019-09-16PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driverJonathan Chocron
This driver is DT based and utilizes the DesignWare APIs. It allows using a smaller ECAM range for a larger bus range - usually an entire bus uses 1MB of address space, but the driver can use it for a larger number of buses. This is achieved by using a HW mechanism which allows changing the BUS part of the "final" outgoing config transaction. There are 2 HW regs, one which is basically a bitmask determining which bits to take from the AXI transaction itself and another which holds the complementary part programmed by the driver. All link initializations are handled by the boot FW. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-09-16dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge bindingJonathan Chocron
Document Amazon's Annapurna Labs PCIe host bridge. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2019-09-16PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root PortJonathan Chocron
The Root Port (identified by [1c36:0031]) doesn't support MSI-X. On some platforms it is configured to not advertise the capability at all, while on others it (mistakenly) does. This causes a panic during initialization by the pcieport driver, since it tries to configure the MSI-X capability. Specifically, when trying to access the MSI-X table a "non-existing addr" exception occurs. Example stacktrace snippet: SError Interrupt on CPU2, code 0xbf000000 -- SError CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33 Hardware name: Annapurna Labs Alpine V3 EVP (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : __pci_enable_msix_range+0x4e4/0x608 lr : __pci_enable_msix_range+0x498/0x608 sp : ffffff80117db700 x29: ffffff80117db700 x28: 0000000000000001 x27: 0000000000000001 x26: 0000000000000000 x25: ffffffd3e9d8c0b0 x24: 0000000000000000 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001 x20: 0000000000000000 x19: ffffffd3e9d8c000 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffffff80116496c8 x14: ffffffd3e9844503 x13: ffffffd3e9844502 x12: 0000000000000038 x11: ffffffffffffff00 x10: 0000000000000040 x9 : ffffff801165e270 x8 : ffffff801165e268 x7 : 0000000000000002 x6 : 00000000000000b2 x5 : ffffffd3e9d8c2c0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffd3e9844680 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33 Hardware name: Annapurna Labs Alpine V3 EVP (DT) Call trace: dump_backtrace+0x0/0x140 show_stack+0x14/0x20 dump_stack+0xa8/0xcc panic+0x140/0x334 nmi_panic+0x6c/0x70 arm64_serror_panic+0x74/0x88 __pte_error+0x0/0x28 el1_error+0x84/0xf8 __pci_enable_msix_range+0x4e4/0x608 pci_alloc_irq_vectors_affinity+0xdc/0x150 pcie_port_device_register+0x2b8/0x4e0 pcie_portdrv_probe+0x34/0xf0 Notice that this quirk also disables MSI (which may work, but hasn't been tested nor has a current use case), since currently there is no standard way to disable only MSI-X. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-09-16PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root PortJonathan Chocron
The Amazon Annapurna Labs PCIe Root Port exposes the VPD capability, but there is no actual support for it. Trying to access the VPD (for example, as part of lspci -vv or when reading the vpd sysfs file), results in the following warning print: pcieport 0001:00:00.0: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-16PCI: Add ACS quirk for Amazon Annapurna Labs root portsAli Saidi
The Amazon's Annapurna Labs root ports don't advertise an ACS capability, but they don't allow peer-to-peer transactions and do validate bus numbers through the SMMU. Additionally, it's not possible for one RP to pass traffic to another RP. Signed-off-by: Ali Saidi <alisaidi@amazon.com> Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-16PCI: Add Amazon's Annapurna Labs vendor IDJonathan Chocron
Add Amazon's Annapurna Labs vendor ID to pci_ids.h. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-16Merge branch 'sched/rt' into sched/core, to pick up -rt changesIngo Molnar
Pick up the first couple of patches working towards PREEMPT_RT. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-16s390: remove pointless drivers-y in drivers/s390/MakefileMasahiro Yamada
This is unused. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
generated by cgit (git 2.34.1) at 2025-09-15 15:22:48 +0000