summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-19Merge tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main pull request for 5.4-rc1 merge window. I don't think there is anything outstanding so next week should just be fixes, but we'll see if I missed anything. I landed some fixes earlier in the week but got delayed writing summary and sending it out, due to a mix of sick kid and jetlag! There are some fixes pending, but I'd rather get the main merge out of the way instead of delaying it longer. It's also pretty large in commit count and new amd header file size. The largest thing is four new amdgpu products (navi12/14, arcturus and renoir APU support). Otherwise it's pretty much lots of work across the board, i915 has started landing tigerlake support, lots of icelake fixes and lots of locking reworking for future gpu support, lots of header file rework (drmP.h is nearly gone), some old legacy hacks (DRM_WAIT_ON) have been put into the places they are needed. uapi: - content protection type property for HDCP core: - rework include dependencies - lots of drmP.h removals - link rate calculation robustness fix - make fb helper map only when required - add connector->DDC adapter link - DRM_WAIT_ON removed - drop DRM_AUTH usage from drivers dma-buf: - reservation object fence helper dma-fence: - shrink dma_fence struct - merge signal functions - store timestamps in dma_fence - selftests ttm: - embed drm_get_object struct into ttm_buffer_object - release_notify callback bridges: - sii902x - audio graph card support - tc358767 - aux data handling rework - ti-snd64dsi86 - debugfs support, DSI mode flags support panels: - Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe Himax8279d, Sharp LD-D5116Z01B - TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1 i915: - Initial tigerlake platform support - Locking simplification work, general all over refactoring. - Selftests - HDCP debug info improvements - DSI properties - Icelake display PLL fixes, colorspace fixes, bandwidth fixes, DSI suspend/resume - GuC fixes - Perf fixes - ElkhartLake enablement - DP MST fixes - GVT - command parser enhancements amdgpu: - add wipe memory on release flag for buffer creation - Navi12/14 support (may be marked experimental) - Arcturus support - Renoir APU support - mclk DPM for Navi - DC display fixes - Raven scatter/gather support - RAS support for GFX - Navi12 + Arcturus power features - GPU reset for Picasso - smu11 i2c controller support amdkfd: - navi12/14 support - Arcturus support radeon: - kexec fix nouveau: - improved display color management - detect lack of GPU power cables vmwgfx: - evicition priority support - remove unused security feature msm: - msm8998 display support - better async commit support for cursor updates etnaviv: - per-process address space support - performance counter fixes - softpin support mcde: - DCS transfers fix exynos: - drmP.h cleanup lima: - reduce logging kirin: - misc clenaups komeda: - dual-link support - DT memory regions hisilicon: - misc fixes imx: - IPUv3 image converter fixes - 32-bit RGB V4L2 pixel format support ingenic: - more support for panel related cases mgag200: - cursor support fix panfrost: - export GPU features register to userspace - gpu heap allocations - per-fd address space support pl111: - CLD pads wiring support removed from DT rockchip: - rework to use DRM PSR helpers - fix bug in VOP_WIN_GET macro - DSI DT binding rework sun4i: - improve support for color encoding and range - DDC enabled GPIO tinydrm: - rework SPI support - improve MIPI-DBI support - moved to drm/tiny vkms: - rework CRC tracking dw-hdmi: - get_eld and i2s improvements gm12u320: - misc fixes meson: - global code cleanup - vpu feature detect omap: - alpha/pixel blend mode properties rcar-du: - misc fixes" * tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm: (2112 commits) drm/nouveau/bar/gm20b: Avoid BAR1 teardown during init drm/nouveau: Fix ordering between TTM and GEM release drm/nouveau/prime: Extend DMA reservation object lock drm/nouveau: Fix fallout from reservation object rework drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors drm/i915: Use NOEVICT for first pass on attemping to pin a GGTT mmap drm/i915: to make vgpu ppgtt notificaiton as atomic operation drm/i915: Flush the existing fence before GGTT read/write drm/i915: Hold irq-off for the entire fake lock period drm/i915/gvt: update RING_START reg of vGPU when the context is submitted to i915 drm/i915/gvt: update vgpu workload head pointer correctly drm/mcde: Fix DSI transfers drm/msm: Use the correct dma_sync calls harder drm/msm: remove unlikely() from WARN_ON() conditions drm/msm/dsi: Fix return value check for clk_get_parent drm/msm: add atomic traces drm/msm/dpu: async commit support drm/msm: async commit support drm/msm: split power control from prepare/complete_commit drm/msm: add kms->flush_commit() ...
2019-09-19iomap: move the iomap_dio_rw ->end_io callback into a structureChristoph Hellwig
Add a new iomap_dio_ops structure that for now just contains the end_io handler. This avoid storing the function pointer in a mutable structure, which is a possible exploit vector for kernel code execution, and prepares for adding a submit_io handler that btrfs needs. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-09-19iomap: split size and error for iomap_dio_rw ->end_ioMatthew Bobrowski
Modify the calling convention for the iomap_dio_rw ->end_io() callback. Rather than passing either dio->error or dio->size as the 'size' argument, instead pass both the dio->error and the dio->size value separately. In the instance that an error occurred during a write, we currently cannot determine whether any blocks have been allocated beyond the current EOF and data has subsequently been written to these blocks within the ->end_io() callback. As a result, we cannot judge whether we should take the truncate failed write path. Having both dio->error and dio->size will allow us to perform such checks within this callback. Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org> [hch: minor cleanups] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2019-09-19Merge branches 'clk-bulk-fix', 'clk-at91' and 'clk-sprd' into clk-nextStephen Boyd
- Make clk_bulk_get_all() return an 'id' corresponding to clock-names * clk-bulk-fix: clk: Make clk_bulk_get_all() return a valid "id" * clk-at91: clk: at91: allow 24 Mhz clock as input for PLL clk: at91: select parent if main oscillator or bypass is enabled clk: at91: fix update bit maps on CFG_MOR write * clk-sprd: clk: sprd: add missing kfree
2019-09-19Merge branches 'clk-cdce-regulator', 'clk-bcm', 'clk-evict-parent-cache' and ↵Stephen Boyd
'clk-actions' into clk-next - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Evict parents from parent cache when they're unregistered * clk-cdce-regulator: clk: clk-cdce925: Add regulator support dt-bindings: clock: cdce925: Add regulator documentation * clk-bcm: clk: bcm2835: Mark PLLD_PER as CRITICAL clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support clk: bcm2835: Introduce SoC specific clock registration dt-bindings: bcm2835-cprman: Add bcm2711 support * clk-evict-parent-cache: clk: Evict unregistered clks from parent caches * clk-actions: clk: actions: Fix factor clk struct member access
2019-09-19Merge branches 'clk-renesas', 'clk-rockchip', 'clk-const' and 'clk-simplify' ↵Stephen Boyd
into clk-next * clk-renesas: clk: renesas: cpg-mssr: Set GENPD_FLAG_ALWAYS_ON for clock domain clk: renesas: r9a06g032: Set GENPD_FLAG_ALWAYS_ON for clock domain clk: renesas: mstp: Set GENPD_FLAG_ALWAYS_ON for clock domain dt-bindings: clk: emev2: Rename bindings documentation file clk: renesas: rcar-usb2-clock-sel: Use devm_platform_ioremap_resource() helper * clk-rockchip: clk: rockchip: Add clock controller for the rk3308 clk: rockchip: Add dt-binding header for rk3308 dt-bindings: Add bindings for rk3308 clock controller clk: rockchip: Fix -Wunused-const-variable in rv1108 clk driver * clk-const: clk: spear: Make structure i2s_sclk_masks constant * clk-simplify: clk/ti: Use kmemdup rather than duplicating its implementation clk: fix devm_platform_ioremap_resource.cocci warnings
2019-09-19Merge branches 'clk-init-destroy', 'clk-doc', 'clk-imx' and 'clk-allwinner' ↵Stephen Boyd
into clk-next - Set clk_init_data pointer inside clk_hw to NULL after registration * clk-init-destroy: clk: Overwrite clk_hw::init with NULL during clk_register() clk: sunxi: Don't call clk_hw_get_name() on a hw that isn't registered clk: ti: Don't reference clk_init_data after registration clk: qcom: Remove error prints from DFS registration rtc: sun6i: Don't reference clk_init_data after registration clk: zx296718: Don't reference clk_init_data after registration clk: milbeaut: Don't reference clk_init_data after registration clk: socfpga: deindent code to proper indentation phy: ti: am654-serdes: Don't reference clk_init_data after registration clk: sprd: Don't reference clk_init_data after registration clk: socfpga: Don't reference clk_init_data after registration clk: sirf: Don't reference clk_init_data after registration clk: qcom: Don't reference clk_init_data after registration clk: meson: axg-audio: Don't reference clk_init_data after registration clk: lochnagar: Don't reference clk_init_data after registration clk: actions: Don't reference clk_init_data after registration * clk-doc: clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h clk: Document of_parse_clkspec() some more clk: Remove extraneous 'for' word in comments * clk-imx: (32 commits) clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: imx: imx8mn: fix audio pll setting clk: imx8mn: Add necessary frequency support for ARM PLL table clk: imx8mn: Add missing rate_count assignment for each PLL structure clk: imx8mn: fix int pll clk gate clk: imx8mn: Add GIC clock clk: imx8mn: Fix incorrect parents clk: imx8mm: Fix incorrect parents clk: imx8mq: Fix sys3 pll references clk: imx8mq: Unregister clks when of_clk_add_provider failed clk: imx8mm: Unregister clks when of_clk_add_provider failed clk: imx8mq: Mark AHB clock as critical clk: imx8mn: Keep uart clocks on for early console clk: imx: Remove unused function statement clk: imx7ulp: Make sure earlycon's clock is enabled clk: imx8mm: Switch to platform driver clk: imx: imx8mm: fix audio pll setting ... * clk-allwinner: clk: sunxi-ng: h6: Allow I2S to change parent rate clk: sunxi-ng: v3s: add Allwinner V3 support clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks dt-bindings: clk: sunxi-ccu: add compatible string for V3 CCU clk: sunxi-ng: v3s: add the missing PLL_DDR1
2019-09-19Merge branches 'clk-qcom', 'clk-mtk', 'clk-armada', 'clk-ingenic' and ↵Stephen Boyd
'clk-meson' into clk-next - Support qcom SM8150 RPMh clks - Set floor ops for qcom sd clks - Support qcom QCS404 WCSS clks - Support for Mediatek MT6779 SoCs - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) * clk-qcom: clk: qcom: rcg: Return failure for RCG update clk: qcom: fix QCS404 TuringCC regmap clk: qcom: clk-rpmh: Add support for SM8150 dt-bindings: clock: Document SM8150 rpmh-clock compatible clk: qcom: clk-rpmh: Convert to parent data scheme dt-bindings: clock: Document the parent clocks clk: qcom: gcc: Use floor ops for SDCC clocks clk: qcom: gcc-qcs404: Use floor ops for sdcc clks clk: qcom: gcc-sdm845: Use floor ops for sdcc clks clk: qcom: define probe by index API as common API clk: qcom: Add WCSS gcc clock control for QCS404 clk: qcom: msm8916: Don't build by default clk: qcom: gcc: Add global clock controller driver for SM8150 dt-bindings: clock: Document gcc bindings for SM8150 clk: qcom: clk-alpha-pll: Add support for Trion PLLs clk: qcom: clk-alpha-pll: Remove post_div_table checks clk: qcom: clk-alpha-pll: Remove unnecessary cast * clk-mtk: clk: mediatek: Runtime PM support for MT8183 mcucfg clock provider clk: mediatek: Register clock gate with device clk: mediatek: add pericfg clocks for MT8183 dt-bindings: clock: mediatek: add pericfg for MT8183 clk: mediatek: Add MT6779 clock support clk: mediatek: Add dt-bindings for MT6779 clocks dt-bindings: mediatek: bindings for MT6779 clk clk: reset: Modify reset-controller driver * clk-armada: clk: mvebu: ap80x: add AP807 clock support clk: mvebu: ap806: Prepare the introduction of AP807 clock support clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver clk: mvebu: ap806: be more explicit on what SaR is clk: mvebu: ap80x-cpu: add AP807 CPU clock support clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock dt-bindings: ap806: Document AP807 clock compatible dt-bindings: ap80x: Document AP807 CPU clock compatible clk: mvebu: ap806: Fix clock name for the cluster clk: mvebu: add CPU clock driver for Armada 7K/8K clk: mvebu: add helper file for Armada AP and CP clocks dt-bindings: ap806: add the cluster clock node in the syscon file * clk-ingenic: clk: ingenic: Use CLK_OF_DECLARE_DRIVER macro clk: ingenic/jz4740: Fix "pll half" divider not read/written properly * clk-meson: (23 commits) clk: meson: g12a: add support for SM1 CPU 1, 2 & 3 clocks clk: meson: g12a: add support for SM1 DynamIQ Shared Unit clock clk: meson: g12a: add support for SM1 GP1 PLL dt-bindings: clk: meson: add sm1 periph clock controller bindings clk: meson: axg-audio: add g12a reset support dt-bindings: clock: meson: add resets to the audio clock controller clk: meson: g12a: expose CPUB clock ID for G12B clk: meson: g12a: add notifiers to handle cpu clock change clk: meson: add g12a cpu dynamic divider driver clk: core: introduce clk_hw_set_parent() clk: meson: remove clk input helper clk: meson: remove ee input bypass clocks clk: meson: clk-regmap: migrate to new parent description method clk: meson: meson8b: migrate to the new parent description method clk: meson: axg: migrate to the new parent description method clk: meson: gxbb: migrate to the new parent description method clk: meson: g12a: migrate to the new parent description method clk: meson: remove ao input bypass clocks clk: meson: axg-aoclk: migrate to the new parent description method clk: meson: gxbb-aoclk: migrate to the new parent description method ...
2019-09-19Merge branches 'clk-aspeed', 'clk-unused', 'clk-of-node-put', ↵Stephen Boyd
'clk-const-bulk-data' and 'clk-debugfs' into clk-next - Add SDIO gate to aspeed driver - Support aspeed AST2600 SoC - Add missing of_node_put() calls in various clk drivers - Drop NULL checks in clk debugfs - Add min/max rates to clk debugfs * clk-aspeed: clk: Add support for AST2600 SoC clk: aspeed: Move structures to header clk: aspeed: Add SDIO gate * clk-unused: clk: st: clkgen-pll: remove unused variable 'st_pll3200c32_407_a0' clk: st: clkgen-fsyn: remove unused variable 'st_quadfs_fs660c32_ops' clk: composite: Drop unused clk.h include clk: Si5341/Si5340: remove redundant assignment to n_den clk: qoriq: Fix -Wunused-const-variable * clk-of-node-put: clk: ti: dm814x: Add of_node_put() to prevent memory leak clk: st: clk-flexgen: Add of_node_put() in st_of_flexgen_setup() clk: davinci: pll: Add of_node_put() in of_davinci_pll_init() clk: versatile: Add of_node_put() in cm_osc_setup() * clk-const-bulk-data: clk: Constify struct clk_bulk_data * where possible * clk-debugfs: clk: Drop !clk checks in debugfs dumping clk: Use seq_puts() in possible_parent_show() clk: Assert prepare_lock in clk_core_get_boundaries clk: Add clk_min/max_rate entries in debugfs
2019-09-19clk: Drop !clk checks in debugfs dumpingStephen Boyd
These recursive functions have checks for !clk being passed in, but the callers are always looping through lists and therefore the pointers can't be NULL. Drop the checks to simplify the code. Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190826234729.145593-1-sboyd@kernel.org
2019-09-19Merge tag 'pinctrl-v5.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.4 kernel cycle: Core changes: - Fix errors in example code in the documentation. New drivers: - Add support for JZ4760, JZ4760B, X1000, X1000E and X1500 to the Ingenic driver. - Support Cirrus Logic Madera CS47L92 and CS47L15. - Support Allwinner Sunxi V3S. - Support Aspeed 2600 BMC. - Support Qualcomm SC7180. - Support Marvell MVEBU CS115. Driver improvements: - Clean up a few drivers to use the devm_platform_ioremap_resource() helper. - Pass the irqchip when registering the gpio_chip in some pin controllers that are also GPIO controllers. - Support suspend/resume in the Tegra driver. - Support pull-up on the Broadcom BCM2711. - The Intel driver can now request locked pads. - Fix the UFS reset pin in the Qualcomm SDM845 driver" * tag 'pinctrl-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (112 commits) pinctrl: meson-gxbb: Fix wrong pinning definition for uart_c pinctrl: sh-pfc: Unlock on error in sh_pfc_func_set_mux() pinctrl: bcm: remove redundant assignment to pointer log pinctrl: iproc: Add 'get_direction' support pinctrl: iproc-gpio: Handle interrupts for multiple instances pinctrl: iproc-gpio: Fix incorrect pinconf configurations pinctrl: intel: mark intel_pin_to_gpio __maybe_unused pinctrl: qcom: sdm845: Fix UFS_RESET pin pinctrl: mvebu: add additional variant for standalone CP115 pinctrl: mvebu: Add CP110 missing pin functionality dt-bindings: cp110: document the new CP115 pinctrl compatible pinctrl: bcm2835: Pass irqchip when adding gpiochip pinctrl: meson: meson: Add of_node_put() before return pinctrl/gpio: Take MUX usage into account dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150l support dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150b support dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150 support pinctrl: amd: disable spurious-firing GPIO IRQs pinctrl: rza2: Include the appropriate headers pinctrl: rza2: Drop driver use of consumer flags ...
2019-09-19Merge tag 'tag-chrome-platform-for-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "CrOS EC / MFD Migration: - Move cros_ec core driver from mfd into chrome platform. Wilco EC: - Add batt_ppid_info command to Wilco telemetry driver. CrOS EC: - cros_ec_rpmsg : Add support to inform EC of suspend/resume status - cros_ec_rpmsg : Fix race condition on probe failed - cros_ec_chardev : Add a poll handler to receive MKBP events Misc: - bugfixes in cros_usbpd_logger and cros_ec_ishtp" * tag 'tag-chrome-platform-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_usbpd_logger: null check create_singlethread_workqueue platform/chrome: cros_ec_chardev: Add a poll handler to receive MKBP events platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed platform/chrome: chromeos_tbmc: Report wake events mfd: cros_ec: Use mfd_add_hotplug_devices() helper mfd: cros_ec: Add convenience struct to define autodetectable CrOS EC subdevices mfd: cros_ec: Add convenience struct to define dedicated CrOS EC MCUs mfd: cros_ec: Use kzalloc and cros_ec_cmd_xfer_status helper mfd / platform: cros_ec: Reorganize platform and mfd includes mfd / platform: cros_ec: Rename config to a better name mfd: cros_ec: Switch to use the new cros-ec-chardev driver mfd / platform: cros_ec: Miscellaneous character device to talk with the EC mfd / platform: cros_ec: Move cros-ec core driver out from MFD mfd / platform: cros_ec: Handle chained ECs as platform devices platform/chrome: cros_ec_rpmsg: Add host command AP sleep state support platform/chrome: chromeos_laptop: drop checks of NULL-safe functions platform/chrome: wilco_ec: Add batt_ppid_info command to telemetry driver
2019-09-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - input core allows hardware drivers to specify a [more precise] timestamp (normally taken in top half) to better track velocity of contacts - input_dev instances now support "polling" mode so that drivers could use the same object for polled and interrupt-driven operation. The plan is to convert existing drivers and retire input_polled_dev API - a new driver for the FlySky FS-iA6B RC receiver - a refresh of BU21013 touchpad driver - w90x900 keyboard and touchpad drivers are removed as the platform is gone - assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits) Input: sidewinder - make array seq static const, makes object smaller Input: reset device timestamp on sync Input: bu21013_ts - switch to using standard touchscreen properties Input: bu21013_ts - switch to using MT-B (slotted) protocol Input: bu21013_ts - fix suspend when wake source Input: bu21013_ts - use interrupt from I2C client Input: bu21013_ts - remove support for platform data Input: bu21013_ts - convert to using managed resources Input: bu21013_ts - remove useless comments Input: bu21013_ts - annotate supend/resume methods as __maybe_unused Input: bu21013_ts - rename some variables Input: bu21013_ts - convert to use GPIO descriptors ARM: ux500: improve BU21013 touchpad bindings Input: i8042 - enable wakeup on a stable struct device Input: soc_button_array - use platform_device_register_resndata() Input: psmouse - drop all unneeded functions from mouse headers Input: add support for polling to input devices Input: wacom_w8001 - allocate additional space for 'phys' Input: cros_ec_keyb - add back missing mask for event_type Input: remove dev_err() usage after platform_get_irq() ...
2019-09-19Merge tag 'for-linus-5.4-1' of git://github.com/cminyard/linux-ipmiLinus Torvalds
Pull IPMI updates from Corey Minyard: "A few minor fixes and some cosmetic changes. Nothing big here, but some minor things that people have found and some minor reworks for names and include files" * tag 'for-linus-5.4-1' of git://github.com/cminyard/linux-ipmi: ipmi_si_intf: Fix race in timer shutdown handling ipmi: move message error checking to avoid deadlock ipmi_ssif: avoid registering duplicate ssif interface ipmi: Free receive messages when in an oops ipmi_si: Only schedule continuously in the thread in maintenance mode ipmi_si: Remove ipmi_ from the device attr names ipmi_si: Convert device attr permissions to octal ipmi_si: Rework some include files ipmi_si: Convert timespec64 to timespec
2019-09-19Merge tag 'mailbox-v5.4' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - qcom: - enable support for ipq8074, sm1850 and sm7180 - add child device node for qcs404 - misc fixes - mediatek: - enable support for mt8183 - misc rejig of cmdq driver - new client-reg dt property - armada: - use device-managed registration api * tag 'mailbox-v5.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: qcom-apcs: fix max_register value mailbox: qcom: Add support for IPQ8074 APCS dt-bindings: mailbox: qom: Add ipq8074 APPS compatible mailbox: qcom: Add support for Qualcomm SM8150 and SC7180 SoCs dt-bindings: mailbox: Add APSS shared for SM8150 and SC7180 SoCs mbox: qcom: replace integer with valid macro mbox: qcom: add APCS child device for QCS404 mailbox: mediatek: cmdq: clear the event in cmdq initial flow mailbox: mediatek: cmdq: support mt8183 gce function mailbox: mediatek: cmdq: move the CMDQ_IRQ_MASK into cmdq driver data dt-binding: gce: add binding for gce client reg property dt-binding: gce: add gce header file for mt8183 dt-binding: gce: remove thread-num property mailbox: armada-37xx-rwtm: Use device-managed registration API
2019-09-19Merge tag 'devicetree-for-5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - a bunch of DT binding conversions to DT schema format - clean-ups of the Arm idle-states binding - support a default number of cells in of_for_each_phandle() when the cells name is missing - expose dtbs_check and dt_binding_check in the make help - convert writting-schema.md to ReST - HiSilicon reset controller binding updates - add documentation for MT8516 RNG * tag 'devicetree-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (46 commits) of: restore old handling of cells_name=NULL in of_*_phandle_with_args() bus: qcom: fix spelling mistake "ambigous" -> "ambiguous" of: Let of_for_each_phandle fallback to non-negative cell_count iommu: pass cell_count = -1 to of_for_each_phandle with cells_name dt-bindings: arm: Convert Realtek board/soc bindings to json-schema dt-bindings: arm: Convert Actions Semi bindings to jsonschema dt-bindings: Correct spelling in example schema dt-bindings: cpu: Add a support cpu type for cortex-a55 dt-bindings: gpu: mali-midgard: Add samsung exynos5250 compatible dt-bindings: arm: idle-states: Move exit-latency-us explanation dt-bindings: arm: idle-states: Add punctuation to improve readability dt-bindings: arm: idle-states: Correct "constraint guarantees" dt-bindings: arm: idle-states: Correct references to wake-up delay dt-bindings: arm: idle-states: Use "e.g." and "i.e." consistently pinctrl-mcp23s08: Fix property-name in dt-example dt-bindings: Clarify interrupts-extended usage dt-bindings: Convert Arm Mali Utgard GPU to DT schema dt-bindings: Convert Arm Mali Bifrost GPU to DT schema dt-bindings: Convert Arm Mali Midgard GPU to DT schema dt-bindings: irq: Convert Allwinner NMI Controller to a schema ...
2019-09-19Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - add dma-mapping and block layer helpers to take care of IOMMU merging for mmc plus subsequent fixups (Yoshihiro Shimoda) - rework handling of the pgprot bits for remapping (me) - take care of the dma direct infrastructure for swiotlb-xen (me) - improve the dma noncoherent remapping infrastructure (me) - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me) - cleanup mmaping of coherent DMA allocations (me) - various misc cleanups (Andy Shevchenko, me) * tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits) mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE mmc: queue: Fix bigger segments usage arm64: use asm-generic/dma-mapping.h swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page swiotlb-xen: simplify cache maintainance swiotlb-xen: use the same foreign page check everywhere swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable xen: remove the exports for xen_{create,destroy}_contiguous_region xen/arm: remove xen_dma_ops xen/arm: simplify dma_cache_maint xen/arm: use dev_is_dma_coherent xen/arm: consolidate page-coherent.h xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance arm: remove wrappers for the generic dma remap helpers dma-mapping: introduce a dma_common_find_pages helper dma-mapping: always use VM_DMA_COHERENT for generic DMA remap vmalloc: lift the arm flag for coherent mappings to common code dma-mapping: provide a better default ->get_required_mask dma-mapping: remove the dma_declare_coherent_memory export remoteproc: don't allow modular build ...
2019-09-19Merge tag 'configfs-for-5.4' of git://git.infradead.org/users/hch/configfsLinus Torvalds
Pull configfs updates from Christoph Hellwig: - fix a symlink deadlock (Al Viro) - various cleanups (Al Viro, me) * tag 'configfs-for-5.4' of git://git.infradead.org/users/hch/configfs: configfs: calculate the symlink target only once configfs: make configfs_create() return inode configfs: factor dirent removal into helpers configfs: fix a deadlock in configfs_symlink()
2019-09-19Hexagon: change maintainer to Brian CainBrian Cain
Signed-off-by: Brian Cain <bcain@codeaurora.org> Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
2019-09-19iwlwifi: mvm: fix build w/o CONFIG_THERMALJohannes Berg
Without CONFIG_THERMAL, the driver fails to link as it calls iwl_mvm_send_temp_report_ths_cmd() unconditionally. Fix this by making that function available, but do almost nothing but send the empty firmware command to enable CT-kill reporting. While at it, also fix that function itself to not error out when the thermal zone hasn't been initialized, but instead just send the empty firmware command in this case as well. Fixes: 242d9c8b9a93 ("iwlwifi: mvm: use FW thermal monitoring regardless of CONFIG_THERMAL") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-19ata: libahci_platform: Add of_node_put() before loop exitNishka Dasgupta
Each iteration of for_each_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Add an of_node_put before three such goto statements. Issue found with Coccinelle. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-19Merge tag '5.4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs updates from Steve French: "Various cifs/smb3 fixes (including for share deleted cases) and features including improved encrypted read performance, and various debugging improvements. Note that since I am at a test event this week with the Samba team, and at the annual Storage Developer Conference/SMB3 Plugfest test event next week a higher than usual number of fixes is expected later next week as other features in progress get additional testing and review during these two events" * tag '5.4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (38 commits) cifs: update internal module version number cifs: modefromsid: write mode ACE first cifs: cifsroot: add more err checking smb3: add missing worker function for SMB3 change notify cifs: Add support for root file systems cifs: modefromsid: make room for 4 ACE smb3: fix potential null dereference in decrypt offload smb3: fix unmount hang in open_shroot smb3: allow disabling requesting leases smb3: improve handling of share deleted (and share recreated) smb3: display max smb3 requests in flight at any one time smb3: only offload decryption of read responses if multiple requests cifs: add a helper to find an existing readable handle to a file smb3: enable offload of decryption of large reads via mount option smb3: allow parallelizing decryption of reads cifs: add a debug macro that prints \\server\share for errors smb3: fix signing verification of large reads smb3: allow skipping signature verification for perf sensitive configurations smb3: add dynamic tracepoints for flush and close smb3: log warning if CSC policy conflicts with cache mount option ...
2019-09-19Merge tag 'for-linus-5.4-ofs1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux Pull orangefs updates from Mike Marshall: "A fix and a cleanup. The fix: way back in the stone age (2003) mode was set to the magic number "755" in what is now fs/orangefs/namei.c(orangefs_symlink). Łukasz Wrochna reported it and Artur Świgoń sent in a patch to change it to octal. Maybe it shouldn't be a magic number at all but rather something like "S_IRWXU | S_IRGRP | S_IXGRP | S_IROTH | S_IXOTH"... cleanup: Colin Ian King found a redundant assignment and sent in a patch to remove it" [ And no, octal numbers for permissions are a lot more legible than a binary 'or' of some line noise macros. So 0755 is preferred over trying to spell it out using "helpful" macros - Linus ] * tag 'for-linus-5.4-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: remove redundant assignment to err orangefs: Add octal zero prefix
2019-09-19Merge branch 'work.autofs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull autofs updates from Al Viro: "The most interesting part here is getting rid of the last trylock loop on dentry->d_lock. The ones in fs/dcache.c had been dealt with several years ago, but there'd been leftovers in fs/autofs/expire.c" * 'work.autofs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: autofs_lookup(): hold ->d_lock over playing with ->d_flags get rid of autofs_info->active_count autofs: simplify get_next_positive_...(), get rid of trylocks
2019-09-19Merge branch 'work.mount2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc mount API conversions from Al Viro: "Conversions to new API for shmem and friends and for mount_mtd()-using filesystems. As for the rest of the mount API conversions in -next, some of them belong in the individual trees (e.g. binderfs one should definitely go through android folks, after getting redone on top of their changes). I'm going to drop those and send the rest (trivial ones + stuff ACKed by maintainers) in a separate series - by that point they are independent from each other. Some stuff has already migrated into individual trees (NFS conversion, for example, or FUSE stuff, etc.); those presumably will go through the regular merges from corresponding trees." * 'work.mount2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: Make fs_parse() handle fs_param_is_fd-type params better vfs: Convert ramfs, shmem, tmpfs, devtmpfs, rootfs to use the new mount API shmem_parse_one(): switch to use of fs_parse() shmem_parse_options(): take handling a single option into a helper shmem_parse_options(): don't bother with mpol in separate variable shmem_parse_options(): use a separate structure to keep the results make shmem_fill_super() static make ramfs_fill_super() static devtmpfs: don't mix {ramfs,shmem}_fill_super() with mount_single() vfs: Convert squashfs to use the new mount API mtd: Kill mount_mtd() vfs: Convert jffs2 to use the new mount API vfs: Convert cramfs to use the new mount API vfs: Convert romfs to use the new mount API vfs: Add a single-or-reconfig keying to vfs_get_super()
2019-09-19drm/panfrost: Prevent race when handling page faultSteven Price
When handling a GPU page fault addr_to_drm_mm_node() is used to translate the GPU address to a buffer object. However it is possible for the buffer object to be freed after the function has returned resulting in a use-after-free of the BO. Change addr_to_drm_mm_node to return the panfrost_gem_object with an extra reference on it, preventing the BO from being freed until after the page fault has been handled. Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190913160310.50444-1-steven.price@arm.com
2019-09-19drm/panfrost: Remove NULL checks for regulatorSteven Price
devm_regulator_get() is now used to populate pfdev->regulator which ensures that this cannot be NULL (a dummy regulator will be returned if necessary). So remove the checks in panfrost_devfreq_target(). Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/3e3a2c8a-b4fc-8af6-39e1-b26160db2c7c@arm.com
2019-09-19drm/panfrost: Fix regulator_get_optional() misuseMark Brown
The panfrost driver requests a supply using regulator_get_optional() but both the name of the supply and the usage pattern suggest that it is being used for the main power for the device and is not at all optional for the device for function, there is no meaningful handling for absent supplies. Such regulators should use the vanilla regulator_get() interface, it will ensure that even if a supply is not described in the system integration one will be provided in software. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190904123032.23263-1-broonie@kernel.org
2019-09-19Merge tag 'y2038-vfs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground Pull y2038 vfs updates from Arnd Bergmann: "Add inode timestamp clamping. This series from Deepa Dinamani adds a per-superblock minimum/maximum timestamp limit for a file system, and clamps timestamps as they are written, to avoid random behavior from integer overflow as well as having different time stamps on disk vs in memory. At mount time, a warning is now printed for any file system that can represent current timestamps but not future timestamps more than 30 years into the future, similar to the arbitrary 30 year limit that was added to settimeofday(). This was picked as a compromise to warn users to migrate to other file systems (e.g. ext4 instead of ext3) when they need the file system to survive beyond 2038 (or similar limits in other file systems), but not get in the way of normal usage" * tag 'y2038-vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground: ext4: Reduce ext4 timestamp warnings isofs: Initialize filesystem timestamp ranges pstore: fs superblock limits fs: omfs: Initialize filesystem timestamp ranges fs: hpfs: Initialize filesystem timestamp ranges fs: ceph: Initialize filesystem timestamp ranges fs: sysv: Initialize filesystem timestamp ranges fs: affs: Initialize filesystem timestamp ranges fs: fat: Initialize filesystem timestamp ranges fs: cifs: Initialize filesystem timestamp ranges fs: nfs: Initialize filesystem timestamp ranges ext4: Initialize timestamps limits 9p: Fill min and max timestamps in sb fs: Fill in max and min timestamps in superblock utimes: Clamp the timestamps before update mount: Add mount warning for impending timestamp expiry timestamp_truncate: Replace users of timespec64_trunc vfs: Add timestamp_truncate() api vfs: Add file timestamp range support
2019-09-19timer: Read jiffies once when forwarding base clkLi RongQing
The timer delayed for more than 3 seconds warning was triggered during testing. Workqueue: events_unbound sched_tick_remote RIP: 0010:sched_tick_remote+0xee/0x100 ... Call Trace: process_one_work+0x18c/0x3a0 worker_thread+0x30/0x380 kthread+0x113/0x130 ret_from_fork+0x22/0x40 The reason is that the code in collect_expired_timers() uses jiffies unprotected: if (next_event > jiffies) base->clk = jiffies; As the compiler is allowed to reload the value base->clk can advance between the check and the store and in the worst case advance farther than next event. That causes the timer expiry to be delayed until the wheel pointer wraps around. Convert the code to use READ_ONCE() Fixes: 236968383cf5 ("timers: Optimize collect_expired_timers() for NOHZ") Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Liang ZhiCheng <liangzhicheng@baidu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1568894687-14499-1-git-send-email-lirongqing@baidu.com
2019-09-19selftests/ftrace: Update kprobe event error testcaseMasami Hiramatsu
Update kprobe event error testcase to test if it correctly finds the exact same probe event. Link: http://lkml.kernel.org/r/156879695513.31056.1580235733738840126.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-09-19tracing/probe: Reject exactly same probe eventMasami Hiramatsu
Reject exactly same probe events as existing probes. Multiprobe allows user to define multiple probes on same event. If user appends a probe which exactly same definition (same probe address and same arguments) on existing event, the event will record same probe information twice. That can be confusing users, so reject it. Link: http://lkml.kernel.org/r/156879694602.31056.5533024778165036763.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-09-19drm: Measure Self Refresh Entry/Exit times to avoid thrashingSean Paul
Currently the self refresh idle timer is a const set by the crtc. This is fine if the self refresh entry/exit times are well-known for all panels used on that crtc. However panels and workloads can vary quite a bit, and a timeout which works well for one doesn't work well for another. In the extreme, if the timeout is too short we could get in a situation where the self refresh exits are taking so long we queue up a self refresh entry before the exit commit is even finished. This patch changes the idle timeout to a moving average of the entry times + a moving average of exit times + the crtc constant. This patch was tested on rockchip, with a kevin CrOS panel the idle delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On the same board, the bob panel idle delay lands around ~340ms (90 entry + 150 exit + 100 const). WRT the dedicated mutex in self_refresh_data, it would be nice if we could rely on drm_crtc.mutex to protect the average times, but there are a few reasons why a separate lock is a better choice: - We can't rely on drm_crtc.mutex being held if we're doing a nonblocking commit - We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us whether the lock was already held in the acquire context (it eats -EALREADY), so we can't tell if we should drop it or not - We don't need such a heavy-handed lock for what we're trying to do, commit ordering doesn't matter, so a point-of-use lock will be less contentious Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-2-sean@poorly.run Changes in v2: - Migrate locking explanation from comment to commit msg (Daniel) - Turf constant entry delay and multiply the avg times by 2 (Daniel)
2019-09-19drm: Fix kerneldoc and remove unused struct member in self_refresh helperSean Paul
Artifacts of previous revisions. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-1-sean@poorly.run Link: https://patchwork.freedesktop.org/patch/msgid/20190918200734.149876-1-sean@poorly.run Changes in v2: - None
2019-09-19tracing/probe: Fix to allow user to enable events on unloaded modulesMasami Hiramatsu
Fix to allow user to enable probe events on unloaded modules. This operations was allowed before commit 60d53e2c3b75 ("tracing/probe: Split trace_event related data from trace_probe"), because if users need to probe module init functions, they have to enable those probe events before loading module. Link: http://lkml.kernel.org/r/156879693733.31056.9331322616994665167.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: 60d53e2c3b75 ("tracing/probe: Split trace_event related data from trace_probe") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-09-19of: restore old handling of cells_name=NULL in of_*_phandle_with_args()Uwe Kleine-König
Before commit e42ee61017f5 ("of: Let of_for_each_phandle fallback to non-negative cell_count") the iterator functions calling of_for_each_phandle assumed a cell count of 0 if cells_name was NULL. This corner case was missed when implementing the fallback logic in e42ee61017f5 and resulted in an endless loop. Restore the old behaviour of of_count_phandle_with_args() and of_parse_phandle_with_args() and add a check to of_phandle_iterator_init() to prevent a similar failure as a safety precaution. of_parse_phandle_with_args_map() doesn't need a similar fix as cells_name isn't NULL there. Affected drivers are: - drivers/base/power/domain.c - drivers/base/power/domain.c - drivers/clk/ti/clk-dra7-atl.c - drivers/hwmon/ibmpowernv.c - drivers/i2c/muxes/i2c-demux-pinctrl.c - drivers/iommu/mtk_iommu.c - drivers/net/ethernet/freescale/fman/mac.c - drivers/opp/of.c - drivers/perf/arm_dsu_pmu.c - drivers/regulator/of_regulator.c - drivers/remoteproc/imx_rproc.c - drivers/soc/rockchip/pm_domains.c - sound/soc/fsl/imx-audmix.c - sound/soc/fsl/imx-audmix.c - sound/soc/meson/axg-card.c - sound/soc/samsung/tm2_wm5110.c - sound/soc/samsung/tm2_wm5110.c Thanks to Geert Uytterhoeven for reporting the issue, Peter Rosin for helping pinpoint the actual problem and the testers for confirming this fix. Fixes: e42ee61017f5 ("of: Let of_for_each_phandle fallback to non-negative cell_count") Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Rob Herring <robh@kernel.org>
2019-09-19RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfigAnup Patel
This patch enables more VIRTIO drivers (such as console, rpmsg, 9p, rng, etc.) which are usable on KVM RISC-V Guest and Xvisor RISC-V Guest. Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alexander Graf <graf@amazon.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-19RISC-V: Fix building error when CONFIG_SPARSEMEM_MANUAL=yGreentime Hu
Fix a build break by adjusting where VMALLOC_* and FIXADDR_* are defined. This fixes the definition of the MEMMAP_* macros. CC init/main.o In file included from ./include/linux/mm.h:99, from ./include/linux/ring_buffer.h:5, from ./include/linux/trace_events.h:6, from ./include/trace/syscall.h:7, from ./include/linux/syscalls.h:85, from init/main.c:21: ./arch/riscv/include/asm/pgtable.h: In function ‘pmd_page’: ./arch/riscv/include/asm/pgtable.h:95:24: error: ‘VMALLOC_START’ undeclared (first use in this function); did you mean ‘VMEMMAP_START’? #define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE) ^~~~~~~~~~~~~ Fixes: d95f1a542c3d ("RISC-V: Implement sparsemem") Signed-off-by: Greentime Hu <greentime.hu@sifive.com> [paul.walmsley@sifive.com: minor patch description fix] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-19riscv: dts: Add DT support for SiFive FU540 PWM driverYash Shah
Add the PWM DT node in SiFive FU540 soc-specific DT file. Enable the PWM nodes in HiFive Unleashed board-specific DT file. Signed-off-by: Yash Shah <yash.shah@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> [paul.walmsley@sifive.com: added chip-specific compatible string; dropped reg-names string from pwm1] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-19xsk: relax UMEM headroom alignmentBjörn Töpel
This patch removes the 64B alignment of the UMEM headroom. There is really no reason for it, and having a headroom less than 64B should be valid. Fixes: c0c77d8fb787 ("xsk: add user memory registration support sockopt") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-19bpf: fix BTF limitsAlexei Starovoitov
vmlinux BTF has more than 64k types. Its string section is also at the offset larger than 64k. Adjust both limits to make in-kernel BTF verifier successfully parse in-kernel BTF. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-19bpf: fix BTF verification of enumsAlexei Starovoitov
vmlinux BTF has enums that are 8 byte and 1 byte in size. 2 byte enum is a valid construct as well. Fix BTF enum verification to accept those sizes. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-19libbpf: Remove getsockopt() check for XDP_OPTIONSToke Høiland-Jørgensen
The xsk_socket__create() function fails and returns an error if it cannot get the XDP_OPTIONS through getsockopt(). However, support for XDP_OPTIONS was not added until kernel 5.3, so this means that creating XSK sockets always fails on older kernels. Since the option is just used to set the zero-copy flag in the xsk struct, and that flag is not really used for anything yet, just remove the getsockopt() call until a proper use for it is introduced. Suggested-by: Yonghong Song <yhs@fb.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-19tools/power/x86/intel-speed-select: Fix perf-profile command outputSrinivas Pandruvada
commit "c016ae8f9fa04d361efc8629de49ad3af12b5262 "tools/power/x86/intel-speed-select: Output success/failed for command output" introduced a regression in perf-profile outputs. With this the result field is changed to string interpreting every non zero value as errors. But these commands display on zero (>0) result. For example before this commit the display was: package-1 die-0 cpu-14 get-config-levels:4 Here the get-config-levels is interpreted as error and displayed as error with the above commit: package-1 die-0 cpu-14 get-config-levels:failed(error 4) Fix this issue by not using isst_display_result() to display such results, but define a new function which formats this data and prints. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-09-19tools/power/x86/intel-speed-select: Extend core-power command setSrinivas Pandruvada
Add additional command to get the clos enable and priority type. The current info option is actually dumping per clos QOS config, so name the command appropriately to get-config. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-09-19tools/power/x86/intel-speed-select: Fix some debug printsSrinivas Pandruvada
Fix wrong debug print for cpu, which is displayed as CLOS. Also avoid printing clos id, when user is specify clos as parameter. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-09-19tools/power/x86/intel-speed-select: Format get-assoc informationSrinivas Pandruvada
Format the get-assoc command output consistant with other commands. For example: Intel(R) Speed Select Technology Executing on CPU model:142[0x8e] package-0 die-0 cpu-0 get-assoc clos:0 Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-09-19tools/power/x86/intel-speed-select: Allow online/offline based on tdpSrinivas Pandruvada
Using enable core mask, do online offline CPUs. There is a new option --online|-o for set-config-level. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-09-19tools/power/x86/intel-speed-select: Fix high priority core mask over countYouquan Song
If the CPU package has the less logical CPU than topo_max_cpus, but un-present CPU's punit_cpu_core will be initiated to 0 and they will be count to core 0 Like below, there are only 10 high priority cores (20 logical CPUs) in the CPU package, but it count to 27 logic CPUs. ./intel-speed-select base-freq info -l 0 | grep mask high-priority-cpu-mask:7f000179,f000179f With the fix patch: ./intel-speed-select base-freq info -l 0 high-priority-cpu-mask:00000179,f000179f Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-09-19usbnet: sanity checking of packet sizes and device mtuOliver Neukum
After a reset packet sizes and device mtu can change and need to be reevaluated to calculate queue sizes. Malicious devices can set this to zero and we divide by it. Introduce sanity checking. Reported-and-tested-by: syzbot+6102c120be558c885f04@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 18:39:40 +0000