| Age | Commit message (Collapse) | Author |
|---|
|
Sync pending posted interrupts to the IRR prior to re-scanning I/O APIC
routes, irrespective of whether the I/O APIC is emulated by userspace or
by KVM. If a level-triggered interrupt routed through the I/O APIC is
pending or in-service for a vCPU, KVM needs to intercept EOIs on said
vCPU even if the vCPU isn't the destination for the new routing, e.g. if
servicing an interrupt using the old routing races with I/O APIC
reconfiguration.
Commit fceb3a36c29a ("KVM: x86: ioapic: Fix level-triggered EOI and
userspace I/OAPIC reconfigure race") fixed the common cases, but
kvm_apic_pending_eoi() only checks if an interrupt is in the local
APIC's IRR or ISR, i.e. misses the uncommon case where an interrupt is
pending in the PIR.
Failure to intercept EOI can manifest as guest hangs with Windows 11 if
the guest uses the RTC as its timekeeping source, e.g. if the VMM doesn't
expose a more modern form of time to the guest.
Cc: stable@vger.kernel.org
Cc: Adamos Ttofari <attofari@amazon.de>
Cc: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240611014845.82795-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, bpf and netfilter.
Happy summer solstice! The line count is a bit inflated by a selftest
and update to a driver's FW interface header, in reality this is
slightly below average for us. We are expecting one driver fix from
Intel, but there are no big known issues.
Current release - regressions:
- ipv6: bring NLM_DONE out to a separate recv() again
Current release - new code bugs:
- wifi: cfg80211: wext: set ssids=NULL for passive scans via old wext API
Previous releases - regressions:
- wifi: mac80211: fix monitor channel setting with chanctx emulation
(probably most awaited of the fixes in this PR, tracked by Thorsten)
- usb: ax88179_178a: bring back reset on init, if PHY is disconnected
- bpf: fix UML x86_64 compile failure with BPF
- bpf: avoid splat in pskb_pull_reason(), sanity check added can be hit
with malicious BPF
- eth: mvpp2: use slab_build_skb() for packets in slab, driver was
missed during API refactoring
- wifi: iwlwifi: add missing unlock of mvm mutex
Previous releases - always broken:
- ipv6: add a number of missing null-checks for in6_dev_get(), in case
IPv6 disabling races with the datapath
- bpf: fix reg_set_min_max corruption of fake_reg
- sched: act_ct: add netns as part of the key of tcf_ct_flow_table"
* tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettings
selftests: virtio_net: add forgotten config options
bnxt_en: Restore PTP tx_avail count in case of skb_pad() error
bnxt_en: Set TSO max segs on devices with limits
bnxt_en: Update firmware interface to 1.10.3.44
net: stmmac: Assign configured channel value to EXTTS event
net: do not leave a dangling sk pointer, when socket creation fails
net/tcp_ao: Don't leak ao_info on error-path
ice: Fix VSI list rule with ICE_SW_LKUP_LAST type
ipv6: bring NLM_DONE out to a separate recv() again
selftests: add selftest for the SRv6 End.DX6 behavior with netfilter
selftests: add selftest for the SRv6 End.DX4 behavior with netfilter
netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core
seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors
netfilter: ipset: Fix suspicious rcu_dereference_protected()
selftests: openvswitch: Set value to nla flags.
octeontx2-pf: Fix linking objects into multiple modules
octeontx2-pf: Add error handling to VLAN unoffload handling
virtio_net: fixing XDP for fully checksummed packets handling
virtio_net: checksum offloading handling fix
...
|
|
Introduce a new 'of-fullname-regex' property that takes a regular
expression and matches against the OF_FULLNAME property. It allows
matching controllers that don't have a unique DT address across sibling
controllers, and thus dt-mmio can't be used.
One particular example of where this is needed is on MT8195 which has
multiple USB controllers described by two level deep nodes and using the
ranges property:
ssusb2: usb@112a1000 {
reg = <0 0x112a1000 0 0x2dff>, <0 0x112a3e00 0 0x0100>;
ranges = <0 0 0 0x112a0000 0 0x3f00>;
xhci2: usb@0 {
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240613-kselftest-discoverable-probe-mt8195-kci-v1-2-7b396a9b032d@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for a --boards-dir parameter through which the directory in
which the board files will be searched for can be specified. The
'boards' subdirectory is still used as default when the parameter is not
specified.
This allows more easily running the test with board files supplied by an
external repository like
https://github.com/kernelci/platform-test-parameters.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240613-kselftest-discoverable-probe-mt8195-kci-v1-1-7b396a9b032d@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On Odroid n2/n2+ previously use gpio-hog to reset the usb hub,
switch to used on-board usb hub reset to enable the usb hub
and enable power to hub.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20240613123020.43500-2-linux.amoon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the binding example for the USB3.1 Genesys Logic GL3523
integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed
hub.
For onboard hub controllers that support USB 3.x and USB 2.0 hubs
with shared resets and power supplies, this property is used to identify
the hubs with which these are shared.
GL3523 has built-in 5V to 3.3V and 5V to 1.2V regulators, which serves
power to the USB HUB, it uses 5V power regulator.
Update the peer-hub description.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20240613123020.43500-1-linux.amoon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the aspeed UDC setup, we configure the UDC hardware with the assigned
USB device address.
However, we have an off-by-one in the bitmask, so we're only setting the
lower 6 bits of the address (USB addresses being 7 bits, and the
hardware bitmask being bits 0:6).
This means that device enumeration fails if the assigned address is
greater than 64:
[ 344.607255] usb 1-1: new high-speed USB device number 63 using ehci-platform
[ 344.808459] usb 1-1: New USB device found, idVendor=cc00, idProduct=cc00, bcdDevice= 6.10
[ 344.817684] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 344.825671] usb 1-1: Product: Test device
[ 344.831075] usb 1-1: Manufacturer: Test vendor
[ 344.836335] usb 1-1: SerialNumber: 00
[ 349.917181] usb 1-1: USB disconnect, device number 63
[ 352.036775] usb 1-1: new high-speed USB device number 64 using ehci-platform
[ 352.249432] usb 1-1: device descriptor read/all, error -71
[ 352.696740] usb 1-1: new high-speed USB device number 65 using ehci-platform
[ 352.909431] usb 1-1: device descriptor read/all, error -71
Use the correct mask of 0x7f (rather than 0x3f), and generate this
through the GENMASK macro, so we have numbers that correspond exactly
to the hardware register definition.
Fixes: 055276c13205 ("usb: gadget: add Aspeed ast2600 udc driver")
Cc: stable@vger.kernel.org
Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20240613-aspeed-udc-v2-1-29501ce9cb7a@codeconstruct.com.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
avoid deadlock
When config CONFIG_USB_DWC3_DUAL_ROLE is selected, and trigger system
to enter suspend status with below command:
echo mem > /sys/power/state
There will be a deadlock issue occurring. Detailed invoking path as
below:
dwc3_suspend_common()
spin_lock_irqsave(&dwc->lock, flags); <-- 1st
dwc3_gadget_suspend(dwc);
dwc3_gadget_soft_disconnect(dwc);
spin_lock_irqsave(&dwc->lock, flags); <-- 2nd
This issue is exposed by commit c7ebd8149ee5 ("usb: dwc3: gadget: Fix
NULL pointer dereference in dwc3_gadget_suspend") that removes the code
of checking whether dwc->gadget_driver is NULL or not. It causes the
following code is executed and deadlock occurs when trying to get the
spinlock. In fact, the root cause is the commit 5265397f9442("usb: dwc3:
Remove DWC3 locking during gadget suspend/resume") that forgot to remove
the lock of otg mode. So, remove the redundant lock of otg mode during
gadget suspend/resume.
Fixes: 5265397f9442 ("usb: dwc3: Remove DWC3 locking during gadget suspend/resume")
Cc: Xu Yang <xu.yang_2@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240618031918.2585799-1-Meng.Li@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device_for_each_child_node() macro requires explicit calls to
fwnode_handle_put() in all early exits of the loop if the child node is
not required outside. Otherwise, the child node's refcount is not
decremented and the resource is not released.
The current implementation of pmic_glink_ucsi_probe() makes use of the
device_for_each_child_node(), but does not release the child node on
early returns. Add the missing calls to fwnode_handle_put().
Cc: stable@vger.kernel.org
Fixes: c6165ed2f425 ("usb: ucsi: glink: use the connector orientation GPIO to provide switch events")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240613-ucsi-glink-release-node-v1-1-f7629a56f70a@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Call usb_phy_generic_unregister() if of_platform_populate() fails.
Fixes: d6299b6efbf6 ("usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/69af1b1d-d3f4-492b-bcea-359ca5949f30@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some LG Gram laptops report a bogus connector change event after a
GET_PDOS command for the partner's source PDOs, which disappears from
the CCI after acknowledging the command. However, the subsequent
GET_CONNECTOR_STATUS in ucsi_handle_connector_change() still reports
this bogus change in bits 5 and 6, leading to the UCSI core re-checking
the partner's source PDOs and thus to an infinite loop.
Fix this by adding a quirk that signals when a potentially buggy GET_PDOS
command is used, checks the status change report and clears it if it is a
bogus event before sending it to the UCSI core.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240612-gram_quirk-v1-1-52b0ff0e1546@tecnico.ulisboa.pt
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sometimes errors are seen, when doing DR swap, like:
[ 24.672481] ucsi-stm32g0-i2c 0-0035: UCSI_GET_PDOS failed (-5)
[ 24.720188] ucsi-stm32g0-i2c 0-0035: ucsi_handle_connector_change:
GET_CONNECTOR_STATUS failed (-5)
There may be some race, which lead to read CCI, before the command complete
flag is set, hence returning -EIO. Similar fix has been done also in
ucsi_acpi [1].
In case of a spurious or otherwise delayed notification it is
possible that CCI still reports the previous completion. The
UCSI spec is aware of this and provides two completion bits in
CCI, one for normal commands and one for acks. As acks and commands
alternate the notification handler can determine if the completion
bit is from the current command.
To fix this add the ACK_PENDING bit for ucsi_stm32g0 and only complete
commands if the completion bit matches.
[1] https://lore.kernel.org/lkml/20240121204123.275441-3-lk@c--e.de/
Fixes: 72849d4fcee7 ("usb: typec: ucsi: stm32g0: add support for stm32g0 controller")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/stable/20240612124656.2305603-1-fabrice.gasnier%40foss.st.com
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240612124656.2305603-1-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Syzbot is still reporting quite an old issue [1] that occurs due to
incomplete checking of present usb endpoints. As such, wrong
endpoints types may be used at urb sumbitting stage which in turn
triggers a warning in usb_submit_urb().
Fix the issue by verifying that required endpoint types are present
for both in and out endpoints, taking into account cmd endpoint type.
Unfortunately, this patch has not been tested on real hardware.
[1] Syzbot report:
usb 1-1: BOGUS urb xfer, pipe 1 != type 3
WARNING: CPU: 0 PID: 8667 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
Modules linked in:
CPU: 0 PID: 8667 Comm: kworker/0:4 Not tainted 5.14.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
...
Call Trace:
cxacru_cm+0x3c0/0x8e0 drivers/usb/atm/cxacru.c:649
cxacru_card_status+0x22/0xd0 drivers/usb/atm/cxacru.c:760
cxacru_bind+0x7ac/0x11a0 drivers/usb/atm/cxacru.c:1209
usbatm_usb_probe+0x321/0x1ae0 drivers/usb/atm/usbatm.c:1055
cxacru_usb_probe+0xdf/0x1e0 drivers/usb/atm/cxacru.c:1363
usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396
call_driver_probe drivers/base/dd.c:517 [inline]
really_probe+0x23c/0xcd0 drivers/base/dd.c:595
__driver_probe_device+0x338/0x4d0 drivers/base/dd.c:747
driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:777
__device_attach_driver+0x20b/0x2f0 drivers/base/dd.c:894
bus_for_each_drv+0x15f/0x1e0 drivers/base/bus.c:427
__device_attach+0x228/0x4a0 drivers/base/dd.c:965
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:487
device_add+0xc2f/0x2180 drivers/base/core.c:3354
usb_set_configuration+0x113a/0x1910 drivers/usb/core/message.c:2170
usb_generic_driver_probe+0xba/0x100 drivers/usb/core/generic.c:238
usb_probe_device+0xd9/0x2c0 drivers/usb/core/driver.c:293
Reported-and-tested-by: syzbot+00c18ee8497dd3be6ade@syzkaller.appspotmail.com
Fixes: 902ffc3c707c ("USB: cxacru: Use a bulk/int URB to access the command endpoint")
Cc: stable <stable@kernel.org>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20240609131546.3932-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
printer_read() and printer_write() guard against the race
against disable() by checking the dev->interface flag,
which in turn is guarded by a spinlock.
These functions, however, drop the lock on multiple occasions.
This means that the test has to be redone after reacquiring
the lock and before doing IO.
Add the tests.
This also addresses CVE-2024-25741
Fixes: 7f2ca14d2f9b9 ("usb: gadget: function: printer: Interface is disabled and returns error")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20240620114039.5767-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need to treat super speed plus as super speed, not the default,
which is full speed.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20240620093800.28901-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the Type-C graph, the nb7vpq904m retimer is in between the USB-C
connector and the USB3/DP combo PHY, and this PHY also requires the
USB-C mode events to properly set-up the SuperSpeed Lanes functions
to setup USB3-only, USB3 + DP Altmode or DP Altmode only on the 4 lanes.
Update the nb7vpq904m retimer to get an optional type-c mux on the next
endpoint, and broadcast the received mode to it.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240606-topic-sm8x50-upstream-retimer-broadcast-mode-v2-4-c6f6eae479c3@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the Type-C graph, the ptn36502 retimer is in between the USB-C
connector and the USB3/DP combo PHY, and this PHY also requires the
USB-C mode events to properly set-up the SuperSpeed Lanes functions
to setup USB3-only, USB3 + DP Altmode or DP Altmode only on the 4 lanes.
Update the ptn36502 retimer to get an optional type-c mux on the next
endpoint, and broadcast the received mode to it.
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240606-topic-sm8x50-upstream-retimer-broadcast-mode-v2-3-c6f6eae479c3@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the missing call to typec_switch_put() when probe fails and
the nb7vpq904m_remove() call is called.
Fixes: 348359e7c232 ("usb: typec: nb7vpq904m: Add an error handling path in nb7vpq904m_probe()")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Fixes: 88d8f3ac9c67 ("usb: typec: add support for the nb7vpq904m Type-C Linear Redriver")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240606-topic-sm8x50-upstream-retimer-broadcast-mode-v2-2-c6f6eae479c3@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the missing call to typec_switch_put() when probe fails and
the ptn36502_remove() call is called.
Fixes: 8e99dc783648 ("usb: typec: add support for PTN36502 redriver")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240606-topic-sm8x50-upstream-retimer-broadcast-mode-v2-1-c6f6eae479c3@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adding support for the charge type Linux power supply class
property (POWER_SUPPLY_PROP_CHARGE_TYPE) to the UCSI driver.
That will make the charge type visible in the charge_type
power supply class sysfs attribute file.
UCSI has the charge type specified in the Battery Charging
Status field of the response to the GET_CONNECTOR_STATUS
command.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240619140806.3502590-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Let's use the same data type as struct device.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240618120024.3384047-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a compatible entry for the TI TMUXHS4212 GPIO-based
bidirectional 2:1 mux/1:2 demux which can be used for
switching orientation of the SBU lines in USB Type-C
applications.
TMUXHS4212 datasheet: https://www.ti.com/lit/ds/symlink/tmuxhs4212.pdf
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240613102913.15714-1-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The SC8180X platform has two single port DWC3 instances and a two-port
DWC3 instance. Add compatibles for these to the binding.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240610-sc8180x-dwc3-binding-compatible-v2-1-c7d5db9702a2@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On systems where the UCSI PDOs are not supported, the UCSI driver is
giving an error message. This can cause users to believe there is a HW
issue with their system when in fact it is working as designed.
Check if PDO_DETAILS are supported as a feature before attempting to
access PDO. If not supported return that zero PDOs are available.
Tested on Lenovo L14 G5 AMD and confirmed with Lenovo FW team that PDOs
are not supported on this platform.
Suggested-by: Diogo Ivo <diogo.ivo@siemens.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240609214328.6580-1-mpearson-lenovo@squebb.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
xHCI specification 5.1 "Register Conventions" states that 64 bit
registers should be written in low-high order. All writing operations
in xhci is done low-high order following the spec.
Add a new quirk to support workaround for high-low order.
Signed-off-by: Daehwan Jung <dh10.jung@samsung.com>
Link: https://lore.kernel.org/r/1718019553-111939-4-git-send-email-dh10.jung@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This quirk is for the controller that has a limitation in supporting
separate ERSTBA_HI and ERSTBA_LO programming. It's supported when
the ERSTBA is programmed ERSTBA_HI before ERSTBA_LO. That's because
the internal initialization of event ring fetches the
"Event Ring Segment Table Entry" based on the indication of ERSTBA_LO
written.
Signed-off-by: Daehwan Jung <dh10.jung@samsung.com>
Link: https://lore.kernel.org/r/1718019553-111939-3-git-send-email-dh10.jung@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There's the limitation of Synopsys dwc3 controller with ERST programming in
supporting separate ERSTBA_HI and ERSTBA_LO programming. It's supported when
the ERSTBA is programmed ERSTBA_HI before ERSTBA_LO. But, writing operations
in xHCI is done low-high order following xHCI spec. xHCI specification 5.1
"Register Conventions" states that 64 bit registers should be written in
low-high order. Synopsys dwc3 needs workaround for high-low order. That's why
adding new quirk is needed to support this.
Signed-off-by: Daehwan Jung <dh10.jung@samsung.com>
Link: https://lore.kernel.org/r/1718019553-111939-2-git-send-email-dh10.jung@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify the current firmware packet size check in the tps6598x
implementation by means of a single call to min(), which is what the
current code does in a more verbose, less elegant way.
This patch fixes a cocci warning ("WARNING opportunity for min()").
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240606-tps6598x_fw_update_log-v1-3-2b5b8369a0ba@wolfvision.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current error logs do not show the firmware name and size for the
tps6598x. On the other hand, this information is provided for the
tps25750. Both implementations have access to that information, and the
existing message for the tps25750 can be used for the tps6598x without
extra modifications.
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240606-tps6598x_fw_update_log-v1-2-2b5b8369a0ba@wolfvision.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
tps_request_firmware() reads the firmware name and there is no need to
repeat the action in the device-specific implementations of the firmware
update mechanism.
Provide the firmware name as a parameter in tps_request_firmware() to
avoid repetitive operations in the device-specific implementations.
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240606-tps6598x_fw_update_log-v1-1-2b5b8369a0ba@wolfvision.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Lots of small HD-audio quirks and fixes (mostly Realtek codec and
Cirrus stuff).
Also a small MIDI 2.0 fix and a fix for missing module description
are included"
* tag 'sound-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: cs35l56: Select SERIAL_MULTI_INSTANTIATE
ALSA: hda/realtek: Add more codec ID to no shutup pins list
sound/oss/dmasound: add missing MODULE_DESCRIPTION() macro
ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14ARP8
ALSA: hda/realtek: Enable headset mic on IdeaPad 330-17IKB 81DM
ALSA: hda: tas2781: Component should be unbound before deconstruction
ALSA: hda: cs35l41: Component should be unbound before deconstruction
ALSA: hda: cs35l56: Component should be unbound before deconstruction
ALSA/hda: intel-dsp-config: Document AVS as dsp_driver option
ALSA: hda/realtek: Support Lenovo Thinkbook 13x Gen 4
ALSA: hda/realtek: Support Lenovo Thinkbook 16P Gen 5
ALSA: hda: cs35l41: Support Lenovo Thinkbook 13x Gen 4
ALSA: hda: cs35l41: Support Lenovo Thinkbook 16P Gen 5
ALSA: hda/realtek: Remove Framework Laptop 16 from quirks
ALSA: hda/realtek: Limit mic boost on N14AP7
ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 445/465 G11.
ALSA: seq: ump: Fix missing System Reset message handling
ALSA: hda: cs35l41: Possible null pointer dereference in cs35l41_hda_unbind()
ALSA: hda: cs35l56: Fix lifecycle of codec pointer
|
|
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240604212730.4968-2-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/host/nvme-apple.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
to 0
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240619194413.2544537-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/core/usbcore.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/mon/usbmon.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/class/usbtmc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/storage/uas.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/chipidea/ci_hdrc_msm.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240618-md-drivers-usb-v2-1-e9b20a5eb7f9@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/common/usb-common.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/common/usb-otg-fsm.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240611-md-drivers-usb-common-v1-1-f81555b0bd0d@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/phy/phy-am335x-control.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/phy/phy-am335x.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240611-md-drivers-usb-phy-v1-1-1cacb41280c3@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/host/ohci-exynos.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/host/xhci-pci-renesas.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240611-md-drivers-usb-host-v1-1-e2071a696ef8@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/misc/ezusb.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/misc/isight_firmware.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/misc/yurex.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240611-md-drivers-usb-misc-v1-1-98475a5aa8ef@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/libcomposite.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_acm.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_ss_lb.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/u_serial.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_serial.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_obex.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/u_ether.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_ncm.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_ecm.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_phonet.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_eem.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_ecm_subset.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_rndis.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_mass_storage.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_fs.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_uac1.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_uac1_legacy.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_uac2.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_uvc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_midi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_midi2.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_hid.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_printer.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_tcm.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/legacy/g_zero.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/legacy/g_midi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/legacy/g_dbgp.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240605-md-drivers-usb-gadget-v1-1-29847a46aad3@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use common usb-drd yaml for usb OTG related propteries to fix below
DTB_CHECK warning.
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb: usb@5b110000: usb@5b120000: 'port', 'usb-role-switch' do not match any of the regexes: 'pinctrl-[0-9]+'
Add "port" proptery to use connect type C connector and fix below warning.
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb: usb@5b110000: usb@5b120000: Unevaluated properties are not allowed ('port' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240607154119.1543290-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd fix from Lee Jones:
- Fix AXP717 PMIC probe and by extension its consumers
* tag 'mfd-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: axp20x: AXP717: Fix missing IRQ status registers range
|
|
As the driver supports more devices over time the single MODULE_ALIAS
is complete and raises several warnings:
SPI driver ads7846 has no spi_device_id for ti,tsc2046
SPI driver ads7846 has no spi_device_id for ti,ads7843
SPI driver ads7846 has no spi_device_id for ti,ads7845
SPI driver ads7846 has no spi_device_id for ti,ads7873
Fix this by adding a spi_device_id table and removing the manual
MODULE_ALIAS.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240619122703.2081476-1-alexander.stein@ew.tq-group.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
priv->pdev pointer was set after being used in
fsl_asoc_card_audmux_init().
Move this assignment at the start of the probe function, so
sub-functions can correctly use pdev through priv.
fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the
dev struct, used with dev_err macros.
As priv is zero-initialised, there would be a NULL pointer dereference.
Note that if priv->dev is dereferenced before assignment but never used,
for example if there is no error to be printed, the driver won't crash
probably due to compiler optimisations.
Fixes: 708b4351f08c ("ASoC: fsl: Add Freescale Generic ASoC Sound Card with ASRC support")
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240620132511.4291-2-elinor.montmasson@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sdhci_check_ro() can call mmc_gpio_get_ro() while holding the sdhci
host->lock spinlock. That would be a problem if the GPIO access done by
mmc_gpio_get_ro() needed to sleep.
However, host->lock is not needed anyway. The mmc core ensures that host
operations do not race with each other, and asynchronous callbacks like the
interrupt handler, software timeouts, completion work etc, cannot affect
sdhci_check_ro().
So remove the locking.
Fixes: 6d5cd068ee59 ("mmc: sdhci: use WP GPIO in sdhci_check_ro()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240614080051.4005-3-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
mmc_of_parse() reads device property "wp-inverted" and sets
MMC_CAP2_RO_ACTIVE_HIGH if it is true. MMC_CAP2_RO_ACTIVE_HIGH is used
to invert a write-protect (AKA read-only) GPIO value.
sdhci_get_property() also reads "wp-inverted" and sets
SDHCI_QUIRK_INVERTED_WRITE_PROTECT which is used to invert the
write-protect value as well but also acts upon a value read out from the
SDHCI_PRESENT_STATE register.
Many drivers call both mmc_of_parse() and sdhci_get_property(),
so that both MMC_CAP2_RO_ACTIVE_HIGH and
SDHCI_QUIRK_INVERTED_WRITE_PROTECT will be set if the controller has
device property "wp-inverted".
Amend the logic in sdhci_check_ro() to allow for that possibility,
so that the write-protect value is not inverted twice.
Also do not invert the value if it is a negative error value. Note that
callers treat an error the same as not-write-protected, so the result is
functionally the same in that case.
Also do not invert the value if sdhci host operation ->get_ro() is used.
None of the users of that callback set SDHCI_QUIRK_INVERTED_WRITE_PROTECT
directly or indirectly, but two do call mmc_gpio_get_ro(), so leave it to
them to deal with that if they ever set SDHCI_QUIRK_INVERTED_WRITE_PROTECT
in the future.
Fixes: 6d5cd068ee59 ("mmc: sdhci: use WP GPIO in sdhci_check_ro()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240614080051.4005-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This functions retrieves values by passing a pointer. As the function
that retrieves them can fail before touching the pointers, the variables
must be initialized.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+5186630949e3c55f0799@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20240619132816.11526-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
One may use tools/testing/selftests/drivers/net/virtio_net/config
for example for vng build command like this one:
$ vng -v -b -f tools/testing/selftests/drivers/net/virtio_net/config
In that case, the needed kernel config options are not turned on.
Add the missed kernel config options.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240617072614.75fe79e7@kernel.org/
Reported-by: Matthieu Baerts <matttbe@kernel.org>
Closes: https://lore.kernel.org/netdev/1a63f209-b1d4-4809-bc30-295a5cafa296@kernel.org/
Fixes: ccfaed04db5e ("selftests: virtio_net: add initial tests")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20240619061748.1869404-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Michael Chan says:
====================
bnxt_en: Bug fixes for net
The first firmware interface update is needed by the second patch to
limit the number of TSO segments on the 5760X chips. The third patch
fixes the TX error path for PTP packets.
====================
Link: https://lore.kernel.org/r/20240618215313.29631-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current code only restores PTP tx_avail count when we get DMA
mapping errors. Fix it so that the PTP tx_avail count will be
restored for both DMA mapping errors and skb_pad() errors.
Otherwise PTP TX timestamp will not be available after a PTP
packet hits the skb_pad() error.
Fixes: 83bb623c968e ("bnxt_en: Transmit and retrieve packet timestamps")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240618215313.29631-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
