summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-01-11mmc: core: Add claiming of hosts during mmc_cache_ctrlSeungwon Jeon
While calling mmc_cache_ctrl() a host is not claimed. This patch adds the mmc_try_claim_host() for quick response in suspend. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: omap: remove clock rate hard codingBalaji TK
MMC master clock rate can vary for each instance of the MMC controller on the device. Use clk_get_rate instead to get the value. Signed-off-by: Balaji TK <balajitk@ti.com> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sh_mmcif: remove now superfluous sh_mmcif_host::data memberGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sh_mmcif: process requests asynchronouslyGuennadi Liakhovetski
This patch converts the sh_mmcif MMC host driver to process requests asynchronously instead of waiting in its .request() method for completion. This is achieved by using threaded IRQs. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sh_mmcif: cosmetic clean upGuennadi Liakhovetski
This patch doesn't introduce any functional changes, it only simplifies some code fragments, removes superfluous parameters, fixes typos. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sh_mmcif: process error interrupts firstGuennadi Liakhovetski
If an interrupt is coming with both error and data completion status bits set, it has to be handled as an error interrupt, for which error interrupts have to be processed first. The current version of the driver on the contrary doesn't recognise such interrupts as an error event, which leads to data corruption and breaks the error recovery. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: add a generic GPIO card-detect helperGuennadi Liakhovetski
This patch adds a primitive helper to support card hotplug detection on platforms, where a GPIO, capable of producing interrupts, is used for detection of card-insertion and -removal events. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: add a card hotplug handler contextGuennadi Liakhovetski
SD/MMC controllers provide different card insertion and removal detection methods. On some of them the controller itself issues an interrupt, on others polling is used, on yet others auxiliary means are used for this purpose, e.g., a GPIO IRQ. Further, on some systems one of those methods can be chosen at driver probing time and configured in software. E.g., on some systems the SD/MMC controller card hot-plug detection pin can be configured either as a respective controller functions, or an IRQ-capable GPIO. To support such flexible configurations a card hot-plug context is added by this patch. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: tmio_mmc: Hotplug code regroupingBastian Hecht
This patch regroups the code slightly, adds documentation and allows the rtpm counter of MMC_CAP_NEEDS_POLL devices to reach 0 again. Signed-off-by: Bastian Hecht <hechtb@gmail.com> [g.liakhovetski@gmx.de: restore pm_runtime_get_noresume()] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: core: Fix voltage select in DDR modeGirish K S
This patch fixes the wrong comparison before setting the interface voltage in DDR mode. The assignment to the variable ddr before comaprison is either ddr = MMC_1_2V_DDR_MODE; or ddr == MMC_1_8V_DDR_MODE. But the comparison is done with the extended csd value if ddr == EXT_CSD_CARD_TYPE_DDR_1_2V. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Acked-by: Subhash Jadavani <subhashj@codeaurora.org> Acked-by: Philip Rakity <prakity@marvell.com> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdhci-s3c: use S3C_SDHCI_CONTROL2 instead of hardcoded offset valueJingoo Han
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: dw_mmc: Support predefined mutiple block transfersSeungwon Jeon
This patch adds the support for predefined multiple block r/w. dw_mmc can support MMC_CAP_CMD23 capability. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: dw_mmc: Remove unnecessary else clausesChris Ball
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: dw_mmc: Add more capabilities fieldSeungwon Jeon
This patch adds another capabilities field for MMC_CAPS2_XXX. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: dw_mmc: use dev_pm_ops for dw_mmc controllersJaehoon Chung
This patch modifies dw_mmc to use dev_pm_ops. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: card: Kill block requests if card is removedSujit Reddy Thumma
Kill block requests when the host realizes that the card is removed from the slot and is sure that subsequent requests are bound to fail. Do this silently so that the block layer doesn't output unnecessary error messages. Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: core: Fixup delayed work clock gating patchStephen Boyd
c31b50e (mmc: core: Use delayed work in clock gating framework, 2011-11-14) missed a few things during review: o A useless pr_info() o milliseconds was written as two words o The sysfs file had units in its output Fix all three problems. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdhci-pci: simplify error handlingAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: boot partition ro lock supportJohan Rudholm
Enable boot partitions to be read-only locked until next power on via a sysfs entry. There will be one sysfs entry for each boot partition: /sys/block/mmcblkXbootY/ro_lock_until_next_power_on Each boot partition is locked by writing 1 to its file. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: John Beckett <john.beckett@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11ARM: SAMSUNG: Add pm_caps into platform dataSangwook Lee
Add pm_caps into platform_data. This is power management, usually for SDIO device such as SDIO WLAN. Signed-off-by: Sangwook Lee <sangwook.lee@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdhci-s3c: Add pm_caps into SD/MMC hostSangwook Lee
sdhci-s3c updates pm_caps from platform data for SDIO PM. Signed-off-by: Sangwook Lee <sangwook.lee@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: allow upper layers to know immediately if card has been removedAdrian Hunter
Add a function mmc_detect_card_removed() which upper layers can use to determine immediately if a card has been removed. This function should be called after an I/O request fails so that all queued I/O requests can be errored out immediately instead of waiting for the card device to be removed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: convert drivers/mmc/host/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/mmc/host/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: Remove redundant spi driver bus initializationLars-Peter Clausen
In ancient times it was necessary to manually initialize the bus field of an spi_driver to spi_bus_type. These days this is done in spi_driver_register(), so we can drop the manual assignment. The patch was generated using the following coccinelle semantic patch: // <smpl> @@ identifier _driver; @@ struct spi_driver _driver = { .driver = { - .bus = &spi_bus_type, }, }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sh_mmcif: simplify clock divisor calculationGuennadi Liakhovetski
Replace ilog2(__rounddown_pow_of_two(x)) with the equivalent but much simpler fls(x) - 1. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: core: check for zero length ioctl dataJohan Rudholm
If the read or write buffer size associated with the command sent through the mmc_blk_ioctl is zero, do not prepare data buffer. This enables a ioctl(2) call to for instance send a MMC_SWITCH to set a byte in the ext_csd. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdhci-esdhc: Change delay after setting clock from 100ms to 1msTony Lin
1ms is enough for hardware to change the clock to stable. 100ms is too long in the tasklet. Signed-off-by: Tony Lin <tony.lin@freescale.com> CC: Xiaobo Xie <X.Xie@freescale.com> CC: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: mmc_test: align max_seg_sizePer Forlin
If max_seg_size is unaligned, mmc_test_map_sg() may create sg element sizes that are not aligned with 512 byte. Fix, align max_seg_size at mmc_test_area_init(). Signed-off-by: Per Forlin <per.forlin@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: mmci: add capabilities2 for MMC_CAP2Per Forlin
Signed-off-by: Per Forlin <per.forlin@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdio: support SDIO UHS cardsPhilip Rakity
This patch adds support for sdio UHS cards per the version 3.0 spec. UHS mode is only enabled for version 3.0 cards when both the host and the controller support UHS modes. 1.8v signaling support is removed if both the card and the host do not support UHS. This is done to maintain compatibility and some system/card combinations break when 1.8v signaling is enabled when the host does not support UHS. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Aaron Lu <Aaron.lu@amd.com> Reviewed-by: Arindam Nath <arindam.nath@amd.com> Tested-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdhci-spear: Implement suspend/resumeViresh Kumar
Suspend/Resume is missing from sdhci-spear driver. This patch adds support for suspend/resume for this driver. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: core: Use delayed work in clock gating frameworkSujit Reddy Thumma
Current clock gating framework disables the MCI clock as soon as the request is completed and enables it when a request arrives. This aggressive clock gating framework, when enabled, cause following issues: When there are back-to-back requests from the Queue layer, we unnecessarily end up disabling and enabling the clocks between these requests since 8MCLK clock cycles is a very short duration compared to the time delay between back to back requests reaching the MMC layer. This overhead can effect the overall performance depending on how long the clock enable and disable calls take which is platform dependent. For example on some platforms we can have clock control not on the local processor, but on a different subsystem and the time taken to perform the clock enable/disable can add significant overhead. Also if the host controller driver decides to disable the host clock too when mmc_set_ios function is called with ios.clock=0, it adds additional delay and it is highly possible that the next request had already arrived and unnecessarily blocked in enabling the clocks. This is seen frequently when the processor is executing at high speeds and in multi-core platforms thus reduces the overall throughput compared to if clock gating is disabled. Fix this by delaying turning off the clocks by posting request on delayed workqueue. Also cancel the unscheduled pending work, if any, when there is access to card. sysfs entry is provided to tune the delay as needed, default value set to 200ms. Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: card: Use manufacturer ID symbols in card quirks.Chris Ball
No functional change; adds macros for card manufacturer IDs. Signed-off-by: Chris Ball <cjb@laptop.org> Cc: Andrei E. Warkentin <andrey.warkentin@gmail.com> Cc: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com>
2012-01-11mmc: debugfs: expose the SDCLK frq in sys iosGiuseppe CAVALLARO
This patch is to expose the actual SDCLK frequency in /sys/kernel/debug/mmcX/ios entry. For example, if the max clk for a normal speed card is 20MHz this is reported in /sys/kernel/debug/mmcX/ios. Unfortunately the actual SDCLK frequency (i.e. Baseclock / divisor) is not reported at all: for example, in that case, on Arasan HC, it should be 48/4=12 (MHz). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdio: Fix to support any block size optimallyStefan Nilsson XK
This patch allows any block size to be set on the SDIO link, and still have an arbitrary sized packet (adjusted in size by using sdio_align_size) transferred in an optimal way (preferably one transfer). Previously if the block size was larger than the default of 512 bytes and the transfer size was exactly one block size (possibly thanks to using sdio_align_size to get an optimal transfer size), it was sent as a number of byte transfers instead of one block transfer. Also if the number of blocks was (max_blocks * N) + 1, the tranfer would be conducted with a number of blocks and finished off with a number of byte transfers. When doing this change it was also possible to break out the quirk for broken byte mode in a much cleaner way, and collect the logic of when to do byte or block transfer in one function instead of two. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sd: Macro name cleanup for high speed dtrQiang Liu
Add new macros for the high speed 50MHz case, rather than having a confusing reuse of the value for UHS SDR50, which is 100MHz. Reported-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12sh: magicpanelr2: Update for parse_mtd_partitions() fallout.Paul Mundt
Follows the RSK+ change for the same rationale. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-12sh: mach-rsk: Update for parse_mtd_partitions() fallout.Paul Mundt
The RSK+ setup code was doing some pretty dubious things with parse_mtd_partitions() in order to populate the physmap-flash map platform data. The physmap-flash driver contains all of the functionality that we require already, so simply drop the special casing and pad out the platform data accordingly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-12Merge branch 'sh/nommu' into sh-latestPaul Mundt
2012-01-12sh: sh2a: Improve cache flush/invalidate functionsPhil Edworthy
The cache functions lock out interrupts for long periods; this patch reduces the impact when operating on large address ranges. In such cases it will: - Invalidate the entire cache rather than individual addresses. - Do nothing when flushing the operand cache in write-through mode. - When flushing the operand cache in write-back mdoe, index the search for matching addresses on the cache entires instead of the addresses to flush Note: sh2a__flush_purge_region was only invalidating the operand cache, this adds flush. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-12Merge branch 'sh/hwblk' into sh-latestPaul Mundt
2012-01-12Merge branch 'sh/pm-runtime' into sh-latestPaul Mundt
Conflicts: arch/sh/kernel/cpu/sh4a/clock-sh7723.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-12sh: also without PM_RUNTIME pm_runtime.o must be builtGuennadi Liakhovetski
When CONFIG_PM_RUNTIME is off, drivers/sh/pm_runtime.o still has to be built on sh platforms, because then it provides means to statically switch on device PM clocks. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-12sh: add a resource name for shdmaShimoda, Yoshihiro
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-12Merge branch 'rmobile/smp' into rmobile-latestPaul Mundt
2012-01-12arm: mach-shmobile: add a resource name for shdmaShimoda, Yoshihiro
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-11Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel config: Fix the APB_TIMER selection x86/mrst: Add additional debug prints for pb_keys x86/intel config: Revamp configuration to allow for Moorestown and Medfield x86/intel/scu/ipc: Match the changes in the x86 configuration x86/apb: Fix configuration constraints x86: Fix INTEL_MID silly x86/Kconfig: Cyclone-timer depends on x86-summit x86: Reduce clock calibration time during slave cpu startup x86/config: Revamp configuration for MID devices x86/sfi: Kill the IRQ as id hack
2012-01-11Merge branch 'x86-debug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, reboot: Fix typo in nmi reboot path x86, NMI: Add to_cpumask() to silence compile warning x86, NMI: NMI selftest depends on the local apic x86: Add stack top margin for stack overflow checking x86, NMI: NMI-selftest should handle the UP case properly x86: Fix the 32-bit stackoverflow-debug build x86, NMI: Add knob to disable using NMI IPIs to stop cpus x86, NMI: Add NMI IPI selftest x86, reboot: Use NMI instead of REBOOT_VECTOR to stop cpus x86: Clean up the range of stack overflow checking x86: Panic on detection of stack overflow x86: Check stack overflow in detail
2012-01-11Merge branch 'x86-efi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, efi: Break up large initrd reads x86, efi: EFI boot stub support efi: Add EFI file I/O data types efi.h: Add boottime->locate_handle search types efi.h: Add graphics protocol guids efi.h: Add allocation types for boottime->allocate_pages() efi.h: Add efi_image_loaded_t efi.h: Add struct definition for boot time services x86: Don't use magic strings for EFI loader signature x86: Add missing bzImage fields to struct setup_header
generated by cgit (git 2.34.1) at 2025-09-14 20:29:56 +0000