summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-01-04b43legacy: Avoid packet losses in the dma worker codeLarry Finger
This patch addresses a bug in the dma worker code that keeps draining packets even when the hardware queues are full. In such cases packets can not be passed down to the device and are erroneusly dropped by the code. It is based on commit bad6919469662b7c92bc6353642aaaa777b36bac, which fixes the same problem in b43. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: N-PHY: fix typo in TX power fixRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: N-PHY: fix controling RF overrideRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: N-PHY: update gain ctl workaroundsRafał Miłecki
Specs were updated, now we match wl according to MMIO dumps. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: add lacking boardflags definesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04ath9k: make ath_mci_duty_cycle staticLuis R. Rodriguez
This fixes this sparse warning: CHECK drivers/net/wireless/ath/ath9k/mci.c drivers/net/wireless/ath/ath9k/mci.c:23:4: warning: symbol 'ath_mci_duty_cycle' was not declared. Should it be static? Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04drivers/iwlwifi: use dma_zalloc_coherent() for DMA allocationDjalal Harouni
Replace dma_alloc_coherent()+memset() with the new dma_zalloc_coherent() Signed-off-by: Djalal Harouni <tixxdz@opendz.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: N-PHY: get idle TSSI valuesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: N-PHY: fix success condition of running samplesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: N-PHY: move common TX/RX functionsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04cfg80211: relicense reg.c reg.h and genregdb.awk to ISCLuis R. Rodriguez
Following the tradition we have had with ath5k, ath9k, CRDA, wireless-regdb I'd like to license this code under the permissive ISC license for the code sharing purposes with other OSes, it'd sure be nice to help the landscape in this area. Although I am %82.89 owner of the regulatory code I have asked every contributor to the regulatory code and have receieved positive Acked-bys from everyone except two deceased entities: o Frans Pop RIP 2010 [0] - Frans Pop <elendil@planet.nl> - Frans Pop <fjp@debian.org> o Nokia RIP February, 11, 2011 [1], [2] - ext-yuri.ershov@nokia.com - kalle.valo@nokia.com Frans Pop's contribution was a simple patch 55f98938, titled, "wireless: remove trailing space in messages" which just add a \n to some printk lines. I'm going to treat these additions as uncopyrightable. As for the contributions made by employees on behalf of Nokia my contact point was Petri Karhula <petri.karhula@nokia.com> but after one month he noted he had not been able to get traction from the legal department on this request, as such it I proceeded by replacing their contributions in previous patches. The end goal is to help a clean rewrite that starts in userspace that is shared under ISC license which currently is taking place with the regulatory simulator [3]. [0] http://lists.debian.org/debian-devel/2011/12/msg00263.html [1] http://press.nokia.com/2011/02/11/nokia-outlines-new-strategy-introduces-new-leadership-operational-structure/ [2] http://NokiaPlanB.com [3] git://github.com/mcgrof/regsim.git Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Acked-by: Dan Carpenter <error27@gmail.com> Acked-by: Mihai Moldovan <ionic@ionic.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sven Neumann <s.neumann@raumfeld.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Tony Vroon <tony@linx.net> Acked-by: Pavel Roskin <proski@gnu.org> Acked-by: Bob Copeland <me@bobcopeland.com> Acked-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Acked-by: Pat Erley <pat-lkml@erley.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: John W. Linville <linville@tuxdriver.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Joe Perches <joe@perches.com> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: John Gordon <john@devicescape.com> Acked-by: Simon Barber <protocolmagic@gmail.com> Acked-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Acked-by: Jiri Benc <jbenc@upir.cz> Acked-by: Bruno Randolf <br1@einfach.org> Acked-by: Scott James Remnant <keybuk@google.com> Acked-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04cfg80211: replace reg.c Nokia commit 269ac5Luis R. Rodriguez
Nokia hasn't gotten back to me in over 1 month for a relicense change request. There are only a few changes that they contributed, so just reverting their changes but replacing with another set. This change replaces this commit: commit 269ac5fd2d75b118d76a2291e28796527db2f3f8 Author: Kalle Valo <kalle.valo@nokia.com> Date: Tue Dec 1 10:47:15 2009 +0200 cfg80211: indent regulatory messages with spaces The regulatory messages in syslog look weird: kernel: cfg80211: Regulatory domain: US kernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) kernel: ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) kernel: ^I(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) Indent them with four spaces instead of the tab character to get prettier output. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Acked: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: Petri Karhula <petri.karhula@nokia.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04cfg80211: replace reg.c Nokia commit c4c32294Luis R. Rodriguez
Nokia hasn't gotten back to me in over 1 month for a relicense change request. There are only a few changes that they contributed, so just reverting their changes but replacing with another set. This change replaces this commit: commit c4c322941ce0d7e2b7b8794ad70683123d9cb26a Author: Yuri Ershov <ext-yuri.ershov@nokia.com> Date: Tue Jun 29 15:08:08 2010 +0400 cfg80211: Update of regulatory request initiator handling In some cases there could be possible dereferencing freed pointer. The update is intended to avoid this issue. Signed-off-by: Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: Petri Karhula <petri.karhula@nokia.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04ath9k_hw: fix sparse complaint on ar9003_switch_com_spdt_get()Luis R. Rodriguez
This fixes this sparse complaint: make C=2 CF="-D__CHECK_ENDIAN__" M=drivers/net/wireless/ath/ CHECK drivers/net/wireless/ath/ath9k/ar9003_eeprom.c drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3544:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3544:21: expected restricted __le32 [usertype] val drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3544:21: got restricted __le16 [usertype] switchcomspdt drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3546:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3546:21: expected restricted __le32 [usertype] val drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3546:21: got restricted __le16 [usertype] switchcomspdt The eep->modalHeader5G.switchcomspdt is a le16 and we return u16, so just return le16_to_cpu(). Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04ath5k: avoid sparse warnings on tracingLuis R. Rodriguez
Just skip the sparse checks on tracing. CHECK drivers/net/wireless/ath/ath5k/base.c include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:19:1: error: incompatible types for operation (<) include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:19:1: left side has type struct ath5k_hw *<noident> include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:19:1: right side has type int include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:37:1: error: incompatible types for operation (<) include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:37:1: left side has type struct ath5k_hw *<noident> include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:37:1: right side has type int include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:63:1: error: incompatible types for operation (<) include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:63:1: left side has type struct ath5k_hw *<noident> include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:63:1: right side has type int /home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output /home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output /home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output /home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output CC [M] drivers/net/wireless/ath/ath5k/base.o Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04ath9k: fix tx queue sparse complaintLuis R. Rodriguez
This fixes this rant from sparse: CHECK drivers/net/wireless/ath/ath9k/xmit.c drivers/net/wireless/ath/ath9k/xmit.c:107:13: warning: context imbalance in 'ath_txq_lock' - wrong count at exit drivers/net/wireless/ath/ath9k/xmit.c:112:13: warning: context imbalance in 'ath_txq_unlock' - unexpected unlock drivers/net/wireless/ath/ath9k/xmit.c:123:30: warning: context imbalance in 'ath_txq_unlock_complete' - unexpected unlock CC [M] drivers/net/wireless/ath/ath9k/xmit. Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04ath9k_hw: fix sparse warnings on ar9003_rtt.cLuis R. Rodriguez
This fixes these sparse warnings: CHECK drivers/net/wireless/ath/ath9k/ar9003_rtt.c drivers/net/wireless/ath/ath9k/ar9003_rtt.c:36:6: warning: symbol 'ar9003_hw_rtt_enable' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/ar9003_rtt.c:41:6: warning: symbol 'ar9003_hw_rtt_disable' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/ar9003_rtt.c:46:6: warning: symbol 'ar9003_hw_rtt_set_mask' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/ar9003_rtt.c:52:6: warning: symbol 'ar9003_hw_rtt_force_restore' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/ar9003_rtt.c:102:6: warning: symbol 'ar9003_hw_rtt_load_hist' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/ar9003_rtt.c:135:6: warning: symbol 'ar9003_hw_rtt_fill_hist' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/ar9003_rtt.c:143:6: warning: symbol 'ar9003_hw_rtt_clear_hist' was not declared. Should it be stati Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04NFC: Handle error during NCI data exchangeIlan Elias
Add support for NCI Interface Error Notification. When this notification is received and we're during a data exchange transaction, indicate an error to the NFC core layer via the data exchange callback. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04NFC: Update names and structs to NCI spec 1.0 d22Ilan Elias
Addition, deletion, and modification of NCI constants. Changes in NCI commands, responses, and notifications structures. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04wireless: Protect regdomain change by mutexDmitry Shmidt
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04mac80211: Remove superfluous ieee80211_rx_h_remove_qos_controlHelmut Schaa
This seems to not serve any purpose anymore, at least all frame processing afterwards seems to be able to deal with QoS frames. So, let's save the expensive memmove and just leave the QoS header in the 802.11 frame for further processing. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04net_sched: sfq: always randomize hash perturbationEric Dumazet
SFQ q->perturbation is used in sfq_hash() as an input to Jenkins hash. We currently randomize this 32bit value only if a perturbation timer is setup. Its much better to always initialize it to defeat attackers, or else they can predict very well what kind of packets they have to forge to hit a particular flow. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04net_sched: sfq: fix mem alloc error recoveryEric Dumazet
Since commit 817fb15dfd98 (net_sched: sfq: allow divisor to be a parameter), we can leave perturbation timer armed if a memory allocation error aborts sfq_init(). Memory containing active struct timer_list is freed and kernel can crash. Call sfq_destroy() from sfq_init() to properly dismantle qdisc. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04ethtool: Remove ethtool_ops::set_rx_ntuple operationBen Hutchings
All implementations have been converted to implement set_rxnfc instead. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04sfc: Remove now-unused filter functionBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04sfc: Implement ethtool RX NFC rules API instead of n-tuple APIBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04sfc: Add support for retrieving and removing filters by IDBen Hutchings
These new functions will support an implementation of the ethtool RX NFC rules API. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04sfc: Use consistent types for filter IDs, indices and search depthsBen Hutchings
Filter IDs are u32 (but never very large) so an ID/error return value should have type s32. Filter indices and search depths are never negative, so should have type unsigned int. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04sfc: Change filter ID generation to satisfy priority semantics of RX NFCBen Hutchings
Also add note that the efx_filter_spec::priority field has nothing to do with priority between multiple matching filters. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04ethtool: Allow drivers to select RX NFC rule locationsBen Hutchings
Define special location values for RX NFC that request the driver to select the actual rule location. This allows for implementation on devices that use hash-based filter lookup, whereas currently the API is more suited to devices with TCAM lookup or linear search. In ethtool_set_rxnfc() and the compat wrapper ethtool_ioctl(), copy the structure back to user-space after insertion so that the actual location is returned. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04gianfar: Reject out-of-range RX NFC locationsBen Hutchings
Currently the driver only uses location values to maintain an ordered list of filters. Make it reject location values >= MAX_FILER_IDX passed to the ETHTOOL_SRXCLSRLINS command, consistent with the range it reports for the ETHTOOL_GRXCLSRLALL command. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Sebastian Pöhn <sebastian.poehn@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04Merge branches 'cma', 'misc', 'mlx4', 'nes', 'qib' and 'uverbs' into for-nextRoland Dreier
2012-01-04rdma/core: Fix sparse warningsSean Hefty
Clean up sparse warnings in the rdma core layer. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-04RDMA/cma: Fix endianness bugsSean Hefty
Fix endianness bugs reported by sparse in the RDMA core stack. Note that these are real bugs, but don't affect any existing code to the best of my knowledge. The mlid issue would only affect kernel users of rdma_join_multicast which have the rdma_cm attach/detach its QP. There are no current in tree users that do this. (rdma_join_multicast may be used called by user space applications, which does not have this issue.) And the pkey setting is simply returned as informational. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-04RDMA/nes: Fix terminate during AETatyana Nikolova
Fix for reset which happens right after sending a terminate message. Terminate timer is not deleted when the connection is closed. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Faisal Latif <Faisal.Latif@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-04RDMA/nes: Make unnecessarily global nes_set_pau() staticTatyana Nikolova
Warned about by sparse. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Faisal Latif <Faisal.Latif@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-04RDMA/nes: Change MDIO bus clock to 2.5MHzTatyana Nikolova
Change the PHY clock divisor to make the MDIO clock 2.5MHz, instead of 3.5MHz (which is out of spec). Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Faisal Latif <Faisal.Latif@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-01-04Revert "rtc: Expire alarms after the time is set."Linus Torvalds
This reverts commit 93b2ec0128c431148b216b8f7337c1a52131ef03. The call to "schedule_work()" in rtc_initialize_alarm() happens too early, and can cause oopses at bootup Neil Brown explains why we do it: "If you set an alarm in the future, then shutdown and boot again after that time, then you will end up with a timer_queue node which is in the past. When this happens the queue gets stuck. That entry-in-the-past won't get removed until and interrupt happens and an interrupt won't happen because the RTC only triggers an interrupt when the alarm is "now". So you'll find that e.g. "hwclock" will always tell you that 'select' timed out. So we force the interrupt work to happen at the start just in case." and has a patch that convert it to do things in-process rather than with the worker thread, but right now it's too late to play around with this, so we just revert the patch that caused problems for now. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Requested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Requested-by: John Stultz <john.stultz@linaro.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-04cgroup: move assignement out of condition in cgroup_attach_proc()Dan Carpenter
Gcc complains about this: "kernel/cgroup.c:2179:4: warning: suggest parentheses around assignment used as truth value [-Wparentheses]" Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2012-01-04dlm: add recovery callbacksDavid Teigland
These new callbacks notify the dlm user about lock recovery. GFS2, and possibly others, need to be aware of when the dlm will be doing lock recovery for a failed lockspace member. In the past, this coordination has been done between dlm and file system daemons in userspace, which then direct their kernel counterparts. These callbacks allow the same coordination directly, and more simply. Signed-off-by: David Teigland <teigland@redhat.com>
2012-01-04dlm: add node slots and generationDavid Teigland
Slot numbers are assigned to nodes when they join the lockspace. The slot number chosen is the minimum unused value starting at 1. Once a node is assigned a slot, that slot number will not change while the node remains a lockspace member. If the node leaves and rejoins it can be assigned a new slot number. A new generation number is also added to a lockspace. It is set and incremented during each recovery along with the slot collection/assignment. The slot numbers will be passed to gfs2 which will use them as journal id's. Signed-off-by: David Teigland <teigland@redhat.com>
2012-01-04dlm: move recovery barrier callsDavid Teigland
Put all the calls to recovery barriers in the same function to clarify where they each happen. Should not change any behavior. Also modify some recovery debug lines to make them consistent. Signed-off-by: David Teigland <teigland@redhat.com>
2012-01-04x86: Fix atomic64_xxx_cx8() functionsEric Dumazet
It appears about all functions in arch/x86/lib/atomic64_cx8_32.S are wrong in case cmpxchg8b must be restarted, because LOCK_PREFIX macro defines a label "1" clashing with other local labels : 1: some_instructions LOCK_PREFIX cmpxchg8b (%ebp) jne 1b / jumps to beginning of LOCK_PREFIX ! A possible fix is to use a magic label "672" in LOCK_PREFIX asm definition, similar to the "671" one we defined in LOCK_PREFIX_HERE. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Jan Beulich <JBeulich@suse.com> Cc: Christoph Lameter <cl@linux.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1325608540.2320.103.camel@edumazet-HP-Compaq-6005-Pro-SFF-PC Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-04x86: Fix and improve cmpxchg_double{,_local}()Jan Beulich
Just like the per-CPU ones they had several problems/shortcomings: Only the first memory operand was mentioned in the asm() operands, and the 2x64-bit version didn't have a memory clobber while the 2x32-bit one did. The former allowed the compiler to not recognize the need to re-load the data in case it had it cached in some register, while the latter was overly destructive. The types of the local copies of the old and new values were incorrect (the types of the pointed-to variables should be used here, to make sure the respective old/new variable types are compatible). The __dummy/__junk variables were pointless, given that local copies of the inputs already existed (and can hence be used for discarded outputs). The 32-bit variant of cmpxchg_double_local() referenced cmpxchg16b_local(). At once also: - change the return value type to what it really is: 'bool' - unify 32- and 64-bit variants - abstract out the common part of the 'normal' and 'local' variants Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Christoph Lameter <cl@linux.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/4F01F12A020000780006A19B@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-04Merge commit 'v3.2-rc7' into x86/asmIngo Molnar
Merge reason: Update from -rc4 to -rc7. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-04[CIFS] default ntlmv2 for cifs mount delayed to 3.3Steve French
Turned out the ntlmv2 (default security authentication) upgrade was harder to test than expected, and we ran out of time to test against Apple and a few other servers that we wanted to. Delay upgrade of default security from ntlm to ntlmv2 (on mount) to 3.3. Still works fine to specify it explicitly via "sec=ntlmv2" so this should be fine. Acked-by: Jeff Layton <jlayton@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-01-04Kconfig: acpi: Fix typo in comment.Justin P. Mattock
The below fixes a typo I found in a comment. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-04Merge branch 'vmalloc' of git://git.linaro.org/people/nico/linux into ↵Russell King
devel-stable
2012-01-03IB/cm: Fix layout of APR messageEli Cohen
Add a missing 16-bit reserved field between ap_status and info fields. Signed-off-by: Eli Cohen <eli@mellanox.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit (git 2.34.1) at 2025-09-15 16:07:18 +0000