summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-22net-next/hinic: Add cmdq commandsAviad Krawczyk
Add cmdq commands for setting queue pair contexts in the nic. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add ceqsAviad Krawczyk
Initialize the completion event queues and handle ceq events by calling the registered handlers. Used for cmdq command completion. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Initialize cmdqAviad Krawczyk
Create the work queues for cmdq and update the nic about the work queue contexts. cmdq commands are used for updating the nic about the qp contexts. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Set qp contextAviad Krawczyk
Update the nic about the resources of the queue pairs. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add qp resourcesAviad Krawczyk
Create the resources for queue pair operations: doorbell area, consumer index address and producer index address. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add wqAviad Krawczyk
Create work queues for being used by the queue pairs. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add logical Txq and RxqAviad Krawczyk
Create the logical queues of the nic. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add Rx mode and link event handlerAviad Krawczyk
Add port management message for setting Rx mode in the card, used for rx_mode netdev operation. The link event handler is used for getting a notification about the link state. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add port management commandsAviad Krawczyk
Add the port management commands that are sent as management messages. The port management commands are used for netdev operations. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add aeqsAviad Krawczyk
Handle aeq elements that are accumulated on the aeq by calling the registered handler for the specific event. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add api cmd commandsAviad Krawczyk
Add the api cmd commands for sending management messages to the nic. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add management messagesAviad Krawczyk
Add the management messages for sending to api cmd and the asynchronous event handler for the completion of the messages. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Initialize api cmd hwAviad Krawczyk
Update the hardware about api cmd resources and initialize it. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Initialize api cmd resourcesAviad Krawczyk
Initialize api cmd resources as part of management initialization. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Initialize hw device componentsAviad Krawczyk
Initialize hw device by calling the initialization functions of aeqs and management channel. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Initialize hw interfaceAviad Krawczyk
Initialize hw interface as part of the nic initialization for accessing hw. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22arm64: cleanup {COMPAT_,}SET_PERSONALITY() macroYury Norov
There is some work that should be done after setting the personality. Currently it's done in the macro, which is not the best idea. In this patch new arch_setup_new_exec() routine is introduced, and all setup code is moved there, as suggested by Catalin: https://lkml.org/lkml/2017/8/4/494 Cc: Pratyush Anand <panand@redhat.com> Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> [catalin.marinas@arm.com: comments changed or removed] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-08-22net: ethernet: stmmac: dwmac-rk: Add rv1108 gmac supportDavid Wu
It only supports rmii interface. Add constants and callback functions for the dwmac on rv1108 socs. As can be seen, the base structure is the same, only registers and the bits in them moved slightly. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22ethernet: xircom: small clean up in setup_xirc2ps_cs()Dan Carpenter
The get_options() function takes the whole ARRAY_SIZE(). It doesn't matter here because we don't use more than 7 elements. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2017-08-21 1) Fix memleaks when ESP takes an error path. 2) Fix null pointer dereference when creating a sub policy that matches the same outer flow as main policy does. From Koichiro Den. 3) Fix possible out-of-bound access in xfrm_migrate. This patch should go to the stable trees too. From Vladis Dronov. 4) ESP can return positive and negative error values, so treat both cases as an error. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22ipv6: accept 64k - 1 packet length in ip6_find_1stfragopt()Stefano Brivio
A packet length of exactly IPV6_MAXPLEN is allowed, we should refuse parsing options only if the size is 64KiB or more. While at it, remove one extra variable and one assignment which were also introduced by the commit that introduced the size check. Checking the sum 'offset + len' and only later adding 'len' to 'offset' doesn't provide any advantage over directly summing to 'offset' and checking it. Fixes: 6399f1fae4ec ("ipv6: avoid overflow of offset in ip6_find_1stfragopt") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22Merge tag 'mfd-fixes-4.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD fix from Lee Jones: "Revert duplicate commit in da9062-core" * tag 'mfd-fixes-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: Revert "mfd: da9061: Fix to remove BBAT_CONT register from chip model"
2017-08-22drm/msm/mdp5: mark runtime_pm functions as __maybe_unusedArnd Bergmann
When CONFIG_PM is disabled, we get harmless warnings about unused functions: drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c:1025:12: error: 'mdp5_runtime_resume' defined but not used [-Werror=unused-function] static int mdp5_runtime_resume(struct device *dev) ^~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c:1015:12: error: 'mdp5_runtime_suspend' defined but not used [-Werror=unused-function] static int mdp5_runtime_suspend(struct device *dev) ^~~~~~~~~~~~~~~~~~~~ This marks both functions as __maybe_unused so the compiler can drop them silently. Fixes: d68fe15b1878 ("drm/msm/mdp5: Use runtime PM get/put API instead of toggling clocks") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm: remove unused variableArnd Bergmann
A cleanup left behind an unused variable that we have to remove in order to avoid this harmless warning: drivers/gpu/drm/msm/adreno/a5xx_gpu.c: In function 'a5xx_zap_shader_init': drivers/gpu/drm/msm/adreno/a5xx_gpu.c:493:19: error: unused variable 'a5xx_gpu' [-Werror=unused-variable] Fixes: 8d6f08272b6f ("drm/msm: Remove uneeded platform dev members") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm/mdp5: make helper function staticRob Clark
Not needed outside of mdp5_crtc.c. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm: make msm_framebuffer_init() staticRob Clark
Only needed in msm_fb.c so don't export it. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm: add helper to allocate stolen fbRob Clark
We'll later want to re-use this for state-readback when bootloader enables display, so that we can create an fb for the initial plane->state->fb. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm: don't track fbdev's gem object separatelyRob Clark
The drm_framebuffer is refcnt'd these days and will unref the underlying bo as needed. So we can simplify a little. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm: add modeset module paramRob Clark
At least for debugging it is nice to have an easy way to force the driver not to load. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm/mdp5: add tracking for clk enable-countRob Clark
Accessing registers for an unclocked block is an insta-reboot on snapdragon devices. So add a bit of logic to track the enable_count so we can WARN_ON() unclocked register writes. This makes it much easier to track down mistakes. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm: remove unused defineRob Clark
Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm: Add a helper function for in-kernel buffer allocationsJordan Crouse
Nearly all of the buffer allocations for kernel allocate an buffer object, virtual address and GPU iova at the same time. Make a helper function to handle the details. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> [dropped msm_fbdev conversion to new helper, since it interferes with display-handover work, where we want to separate allocation and mapping] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm: Attach the GPU MMU when it is createdJordan Crouse
Currently the GPU MMU is attached in the adreno_gpu code but as more and more of the GPU initialization moves to the generic GPU path we have a need to map and use GPU memory earlier and earlier. There isn't any reason to defer attaching the MMU until later so attach it right after the address space is created so it can be used immediately. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22arm64: kaslr: Adjust the offset to avoid Image across alignment boundaryCatalin Marinas
With 16KB pages and a kernel Image larger than 16MB, the current kaslr_early_init() logic for avoiding mappings across swapper table boundaries fails since increasing the offset by kimg_sz just moves the problem to the next boundary. This patch rounds the offset down to (1 << SWAPPER_TABLE_SHIFT) if the Image crosses a PMD_SIZE boundary. Fixes: afd0e5a87670 ("arm64: kaslr: Fix up the kernel image alignment") Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Neeraj Upadhyay <neeraju@codeaurora.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-08-22arm64: kaslr: ignore modulo offset when validating virtual displacementArd Biesheuvel
In the KASLR setup routine, we ensure that the early virtual mapping of the kernel image does not cover more than a single table entry at the level above the swapper block level, so that the assembler routines involved in setting up this mapping can remain simple. In this calculation we add the proposed KASLR offset to the values of the _text and _end markers, and reject it if they would end up falling in different swapper table sized windows. However, when taking the addresses of _text and _end, the modulo offset (the physical displacement modulo 2 MB) is already accounted for, and so adding it again results in incorrect results. So disregard the modulo offset from the calculation. Fixes: 08cdac619c81 ("arm64: relocatable: deal with physically misaligned ...") Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-08-22arm64: mm: abort uaccess retries upon fatal signalMark Rutland
When there's a fatal signal pending, arm64's do_page_fault() implementation returns 0. The intent is that we'll return to the faulting userspace instruction, delivering the signal on the way. However, if we take a fatal signal during fixing up a uaccess, this results in a return to the faulting kernel instruction, which will be instantly retried, resulting in the same fault being taken forever. As the task never reaches userspace, the signal is not delivered, and the task is left unkillable. While the task is stuck in this state, it can inhibit the forward progress of the system. To avoid this, we must ensure that when a fatal signal is pending, we apply any necessary fixup for a faulting kernel instruction. Thus we will return to an error path, and it is up to that code to make forward progress towards delivering the fatal signal. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Steve Capper <steve.capper@arm.com> Tested-by: Steve Capper <steve.capper@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Tested-by: James Morse <james.morse@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-08-22arm64: fpsimd: Prevent registers leaking across execDave Martin
There are some tricky dependencies between the different stages of flushing the FPSIMD register state during exec, and these can race with context switch in ways that can cause the old task's regs to leak across. In particular, a context switch during the memset() can cause some of the task's old FPSIMD registers to reappear. Disabling preemption for this small window would be no big deal for performance: preemption is already disabled for similar scenarios like updating the FPSIMD registers in sigreturn. So, instead of rearranging things in ways that might swap existing subtle bugs for new ones, this patch just disables preemption around the FPSIMD state flushing so that races of this type can't occur here. This brings fpsimd_flush_thread() into line with other code paths. Cc: stable@vger.kernel.org Fixes: 674c242c9323 ("arm64: flush FP/SIMD state correctly after execve()") Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-08-22arm64: introduce separated bits for mm_context_t flagsYury Norov
Currently mm->context.flags field uses thread_info flags which is not the best idea for many reasons. For example, mm_context_t doesn't need most of thread_info flags. And it would be difficult to add new mm-related flag if needed because it may easily interfere with TIF ones. To deal with it, the new MMCF_AARCH32 flag is introduced for mm_context_t->flags, where MMCF prefix stands for mm_context_t flags. Also, mm_context_t flag doesn't require atomicity and ordering of the access, so using set/clear_bit() is replaced with simple masks. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-08-22arm64: hugetlb: Cleanup setup_hugepageszSteve Capper
Replace a lot of if statements with switch and case labels to make it much clearer which huge page sizes are supported. Also, we prevent PUD_SIZE from being used on systems not running with 4KB PAGE_SIZE. Before if one supplied PUD_SIZE in these circumstances, then unusuable huge page sizes would be in use. Fixes: 084bd29810a5 ("ARM64: mm: HugeTLB support.") Cc: David Woods <dwoods@mellanox.com> Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-08-22arm64: Re-enable support for contiguous hugepagesPunit Agrawal
also known as - Revert "Revert "Revert "commit 66b3923a1a0f ("arm64: hugetlb: add support for PTE contiguous bit")""" Now that our hugetlb implementation is compliant with the break-before-make requirements of the architecture and we have addressed some of the issues in core code required for properly dealing with hardware poisoning of contiguous hugepages let's re-enable support for contiguous hugepages. This reverts commit 6ae979ab39a368c18ceb0424bf824d172d6ab56f. Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-08-22arm64: hugetlb: Override set_huge_swap_pte_at() to support contiguous hugepagesPunit Agrawal
The default implementation of set_huge_swap_pte_at() does not support hugepages consisting of contiguous ptes. Override it to add support for contiguous hugepages. Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Cc: David Woods <dwoods@mellanox.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-08-22arm64: hugetlb: Override huge_pte_clear() to support contiguous hugepagesPunit Agrawal
The default huge_pte_clear() implementation does not clear contiguous page table entries when it encounters contiguous hugepages that are supported on arm64. Fix this by overriding the default implementation to clear all the entries associated with contiguous hugepages. Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Cc: David Woods <dwoods@mellanox.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-08-22arm: eBPF JIT compilerShubham Bansal
The JIT compiler emits ARM 32 bit instructions. Currently, It supports eBPF only. Classic BPF is supported because of the conversion by BPF core. This patch is essentially changing the current implementation of JIT compiler of Berkeley Packet Filter from classic to internal with almost all instructions from eBPF ISA supported except the following BPF_ALU64 | BPF_DIV | BPF_K BPF_ALU64 | BPF_DIV | BPF_X BPF_ALU64 | BPF_MOD | BPF_K BPF_ALU64 | BPF_MOD | BPF_X BPF_STX | BPF_XADD | BPF_W BPF_STX | BPF_XADD | BPF_DW Implementation is using scratch space to emulate 64 bit eBPF ISA on 32 bit ARM because of deficiency of general purpose registers on ARM. Currently, only LITTLE ENDIAN machines are supported in this eBPF JIT Compiler. Tested on ARMv7 with QEMU by me (Shubham Bansal). Testing results on ARMv7: 1) test_bpf: Summary: 341 PASSED, 0 FAILED, [312/333 JIT'ed] 2) test_tag: OK (40945 tests) 3) test_progs: Summary: 30 PASSED, 0 FAILED 4) test_lpm: OK 5) test_lru_map: OK Above tests are all done with following flags enabled discreatly. 1) bpf_jit_enable=1 a) CONFIG_FRAME_POINTER enabled b) CONFIG_FRAME_POINTER disabled 2) bpf_jit_enable=1 and bpf_jit_harden=2 a) CONFIG_FRAME_POINTER enabled b) CONFIG_FRAME_POINTER disabled See Documentation/networking/filter.txt for more information. Signed-off-by: Shubham Bansal <illusionist.neo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22perf tools: Fix static linking with libunwindKonstantin Khlebnikov
* libunwind-x86_64 must be linked before libunwind * libunwind requires liblzma * static libunwind conflicts with static libgcc_eh Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/150322917247.129799.14247751517961953155.stgit@buzz Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-22perf tools: Fix static linking with libdw from elfutilsKonstantin Khlebnikov
Fix feature test for static libdw: link required dependencies. Backends of libebl are not statically linked thus libdl is required. In Debian/Ubuntu libdw-dev includes libebl.a starting from 0.166-1. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/150322916720.129772.7959925864494283854.stgit@buzz Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-22perf: Fix documentation for sysctls perf_event_paranoid and perf_event_mlock_kbKonstantin Khlebnikov
Fix misprint CAP_IOC_LOCK -> CAP_IPC_LOCK. This capability have nothing to do with raw tracepoints. This part is about bypassing mlock limits. Sysctl kernel.perf_event_paranoid = -1 allows raw and ftrace function tracepoints without CAP_SYS_ADMIN. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/150322916080.129746.11285255474738558340.stgit@buzz Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-22perf tools: Really install manpages via 'make install-man'Konstantin Khlebnikov
Target install-man builds them but forget to install. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: af3df2cf17f5 ("perf tools: Try to build Documentation when installing") Link: http://lkml.kernel.org/r/150322915300.129715.13645857235229756834.stgit@buzz Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-22perf test: Add test cases for new data source encodingAndi Kleen
Add some simple tests to perf test to test data source printing. v2: Make the tests actually checked for the correct name of Forward v3: Adjust to new encoding Committer notes: Avoid the in place declaration to make this build with older compilers, for instance, in Debian 7 we get: tests/mem.c: In function 'test__mem': tests/mem.c:30:5: error: missing initializer [-Werror=missing-field-initializers] tests/mem.c:30:5: error: (near initialization for '(anonymous).<anonymous>.mem_snoop') [-Werror=missing-field-initializers] So just zero a struct, then go on building the unions as needed, reusing settings from the previous test, i.e. local -> remote, etc. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170816222156.19953-5-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-22xfs: stop searching for free slots in an inode chunk when there are noneCarlos Maiolino
In a filesystem without finobt, the Space manager selects an AG to alloc a new inode, where xfs_dialloc_ag_inobt() will search the AG for the free slot chunk. When the new inode is in the same AG as its parent, the btree will be searched starting on the parent's record, and then retried from the top if no slot is available beyond the parent's record. To exit this loop though, xfs_dialloc_ag_inobt() relies on the fact that the btree must have a free slot available, once its callers relied on the agi->freecount when deciding how/where to allocate this new inode. In the case when the agi->freecount is corrupted, showing available inodes in an AG, when in fact there is none, this becomes an infinite loop. Add a way to stop the loop when a free slot is not found in the btree, making the function to fall into the whole AG scan which will then, be able to detect the corruption and shut the filesystem down. As pointed by Brian, this might impact performance, giving the fact we don't reset the search distance anymore when we reach the end of the tree, giving it fewer tries before falling back to the whole AG search, but it will only affect searches that start within 10 records to the end of the tree. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-08-22xfs: add log recovery tracepoint for head/tailBrian Foster
Torn write detection and tail overwrite detection can shift the log head and tail respectively in the event of CRC mismatch or corruption errors. Add a high-level log recovery tracepoint to dump the final log head/tail and make those values easily attainable in debug/diagnostic situations. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-23 14:49:14 +0000