| Age | Commit message (Collapse) | Author |
|---|
|
Tremont is Intel's successor to Goldmont Plus. From the perspective of
Intel cstate residency counters, there is nothing changed compared with
Goldmont Plus and Goldmont.
Share glm_cstates with Goldmont Plus and Goldmont.
Update the comments for Tremont.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1580236279-35492-2-git-send-email-kan.liang@linux.intel.com
|
|
Elkhart Lake also uses Tremont CPU. From the perspective of Intel PMU,
there is nothing changed compared with Jacobsville.
Share the perf code with Jacobsville.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1580236279-35492-1-git-send-email-kan.liang@linux.intel.com
|
|
Fix kernel-doc warning in kernel/sched/fair.c, caused by a recent
function parameter removal:
../kernel/sched/fair.c:3526: warning: Excess function parameter 'flags' description in 'attach_entity_load_avg'
Fixes: a4f9a0e51bbf ("sched/fair: Remove redundant call to cpufreq_update_util()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/cbe964e4-6879-fd08-41c9-ef1917414af4@infradead.org
|
|
This patch fixes the following sparse warnings in sched/core.c
and sched/membarrier.c:
kernel/sched/core.c:2372:27: error: incompatible types in comparison expression
kernel/sched/core.c:4061:17: error: incompatible types in comparison expression
kernel/sched/core.c:6067:9: error: incompatible types in comparison expression
kernel/sched/membarrier.c:108:21: error: incompatible types in comparison expression
kernel/sched/membarrier.c:177:21: error: incompatible types in comparison expression
kernel/sched/membarrier.c:243:21: error: incompatible types in comparison expression
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200201125803.20245-1-madhuparnabhowmik10@gmail.com
|
|
Issuing write() with count parameter set to 0 on any file under
/proc/pressure/ will cause an OOB write because of the access to
buf[buf_size-1] when NUL-termination is performed. Fix this by checking
for buf_size to be non-zero.
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20200203212216.7076-1-surenb@google.com
|
|
Now that patch.o is unconditionally selected for ftrace, it can also
get compiled for !MMU kernels. These (obviously) lack
{set,clear}_fixmap() support.
Also remove the superfluous __acquire/__release nonsense.
Fixes: 42e51f187f86 ("arm/ftrace: Use __patch_text()")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The __patch_text() function already applies __opcode_to_mem_*(), so
when __opcode_to_mem_*() is not the identity (BE*), it is applied
twice, wrecking the instruction.
Fixes: 42e51f187f86 ("arm/ftrace: Use __patch_text()")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
|
|
Jabra Evolve 65 headset appears as if supporting lower rates than
48kHz, but it actually doesn't work but with 48kHz for playback.
This patch applies a workaround to enforce the 48kHz like LINE6
devices already did. The workaround is put in a unified helper
function, set_fixed_rate(), to be called from both places now.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206149
Link: https://lore.kernel.org/r/20200211111419.5895-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Followup patch will need a helper function with the 'clashing entries
refer to the identical tuple in both directions' resolution logic.
This patch will add another resolve_clash helper where loser_ct must
not be added to the dying list because it will be inserted into the
table.
Therefore this also moves the stat counters and dying-list insertion
of the losing ct.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
... so it can be re-used from clash resolution in followup patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
ctinfo is whats taken from the skb, i.e.
ct = nf_ct_get(skb, &ctinfo).
We do not pass 'ct' and instead re-fetch it from the skb.
Just do the same for both netns and ctinfo.
Also add a comment on what clash resolution is supposed to do.
While at it, one indent level can be removed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Only assert that the i915_vma is now idle if and only if no other pins
are present. If another user has the i915_vma pinned, they may submit
more work to the i915_vma skipping the vm->mutex used to serialise the
unbind. We need to wait again, if we want to continue and unbind this
vma.
However, if we own the i915_vma (we hold the vm->mutex for the unbind
and the pin_count is 0), we can assert that the vma remains idle as we
unbind.
Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/530
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123224459.38128-1-chris@chris-wilson.co.uk
(cherry picked from commit 60e94557fff1f5514c7fc4da7ddc2c7a13ffff26)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
To multiply 2 u32 numbers to generate a u64 in C requires a bit of
forewarning for the compiler.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123125934.1401755-1-chris@chris-wilson.co.uk
(cherry picked from commit 0f8f8a64300092852b9361cd835395ee71e6a7d6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
For a simulated preemption reset, we don't populate the request and so
do not fill in the guilty context name.
[ 79.991294] i915 0000:00:02.0: GPU HANG: ecode 9:1:e757fefe, in [0]
Just don't mention the empty string in the logs!
Fixes: 742379c0c400 ("drm/i915: Start chopping up the GPU error capture")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121132107.267709-1-chris@chris-wilson.co.uk
(cherry picked from commit 29baf3ae8daa4c673de58106ff41c7236dff57f4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Currently we create a new mmap_offset for every call to
mmap_offset_ioctl. This exposes ourselves to an abusive client that may
simply create new mmap_offsets ad infinitum, which will exhaust physical
memory and the virtual address space. In addition to the exhaustion, a
very long linear list of mmap_offsets causes other clients using the
object to incur long list walks -- these long lists can also be
generated by simply having many clients generate their own mmap_offset.
However, we can simply use the drm_vma_node itself to manage the file
association (allow/revoke) dropping our need to keep an mmo per-file.
Then if we keep a small rbtree of per-type mmap_offsets, we can lookup
duplicate requests quickly.
Fixes: cc662126b413 ("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120104924.4000706-3-chris@chris-wilson.co.uk
(cherry picked from commit 7865559872074a9ab169c87915504661d630addf)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We need to allow concurrent intel_context_unpin, which means avoiding
doing destructive operations like intel_ring_reset(). This was already
fixed for intel_ring_unpin() in commit 0725d9a31869 ("drm/i915/gt: Make
intel_ring_unpin() safe for concurrent pint"), but I overlooked that
execlists_context_unpin() also made the same mistake.
Reported-by: Matthew Brost <matthew.brost@intel.com>
Fixes: 841350223816 ("drm/i915/gt: Drop mutex serialisation between context pin/unpin")
References: 0725d9a31869 ("drm/i915/gt: Make intel_ring_unpin() safe for concurrent pint")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115175829.2761329-1-chris@chris-wilson.co.uk
(cherry picked from commit f3c0efc9fe7a4e61544034f525348a3aa86ac5aa)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The entire asm/archrandom.h header is generically included via
linux/archrandom.h only when CONFIG_ARCH_RANDOM is already set, so the
stub definitions of __arm64_rndr() and __early_cpu_has_rndr() are only
visible to KASLR if it explicitly includes the arch-internal header.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
During device memory memset, the driver allocates and use a CB (command
buffer). To reuse existing code, it keeps a pointer to the CB in two
variables, user_cb and patched_cb. Therefore, there is no need to "put"
both the user_cb and patched_cb, as it will cause an underflow of the
refcnt of the CB.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
During hard reset we must not write to the device.
Hence avoid halting CoreSight during user context close if it is done
during hard reset.
In addition, we must not re-enable clock gating afterwards as it was
deliberately disabled in the beginning of the hard reset flow.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The driver must halt the engines before doing hard-reset, otherwise the
device can go into undefined state. There is a place where the driver
didn't do that and this patch fixes it.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
It is theoretically possible for the ACPI EC GPE to be set after the
s2idle_ops->wake() called from s2idle_loop() has returned and before
the subsequent pm_wakeup_pending() check is carried out. If that
happens, the resulting wakeup event will cause the system to resume
even though it may be a spurious one.
To avoid that race, first make the ->wake() callback in struct
platform_s2idle_ops return a bool value indicating whether or not
to let the system resume and rearrange s2idle_loop() to use that
value instad of the direct pm_wakeup_pending() call if ->wake() is
present.
Next, rework acpi_s2idle_wake() to process EC events and check
pm_wakeup_pending() before re-arming the SCI for system wakeup
to prevent it from triggering prematurely and add comments to
that function to explain the rationale for the new code flow.
Fixes: 56b991849009 ("PM: sleep: Simplify suspend-to-idle control flow")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 016b87ca5c8c ("ACPI: EC: Rework flushing of pending work")
introduced a subtle bug into the flushing of pending EC work while
suspended to idle, which may cause the EC driver to fail to
re-enable the EC GPE after handling a non-wakeup event (like a
battery status change event, for example).
The problem is that the work item flushed by flush_scheduled_work()
in __acpi_ec_flush_work() may disable the EC GPE and schedule another
work item expected to re-enable it, but that new work item is not
flushed, so __acpi_ec_flush_work() returns with the EC GPE disabled
and the CPU running it goes into an idle state subsequently. If all
of the other CPUs are in idle states at that point, the EC GPE won't
be re-enabled until at least one CPU is woken up by another interrupt
source, so system wakeup events that would normally come from the EC
then don't work.
This is reproducible on a Dell XPS13 9360 in my office which
sometimes stops reacting to power button and lid events (triggered
by the EC on that machine) after switching from AC power to battery
power or vice versa while suspended to idle (each of those switches
causes the EC GPE to trigger for several times in a row, but they
are not system wakeup events).
To avoid this problem, it is necessary to drain the workqueue
entirely in __acpi_ec_flush_work(), but that cannot be done with
respect to system_wq, because work items may be added to it from
other places while __acpi_ec_flush_work() is running. For this
reason, make the EC driver use a dedicated workqueue for EC events
processing (let that workqueue be ordered so that EC events are
processed sequentially) and use drain_workqueue() on it in
__acpi_ec_flush_work().
Fixes: 016b87ca5c8c ("ACPI: EC: Rework flushing of pending work")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently the string formatting is mixing up the offset of ret and
len. Re-work the code to use just len, remove ret and use scnprintf
instead of snprintf and len position accumulation where required.
Remove the -ve return check since scnprintf never returns a failure
-ve size. Also break overly long lines to clean up checkpatch
warnings.
Addresses-Coverity: ("Unused value")
Fixes: 1381a5113caf ("usb: dwc3: debug: purge usage of strcat")
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
Symptom: application opens /dev/ttyGS0 and starts sending (writing) to
it while either USB cable is not connected, or nobody listens on the
other side of the cable. If driver circular buffer overflows before
connection is established, no data will be written to the USB layer
until/unless /dev/ttyGS0 is closed and re-opened again by the
application (the latter besides having no means of being notified about
the event of establishing of the connection.)
Fix: on open and/or connect, kick Tx to flush circular buffer data to
USB layer.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
ffs_aio_cancel() can be called from both interrupt and thread context. Make
sure that the current IRQ state is saved and restored by using
spin_{un,}lock_irq{save,restore}().
Otherwise undefined behavior might occur.
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
SET/CLEAR_FEATURE for Remote Wakeup allowance not handled correctly.
GET_STATUS handling provided not correct data on DATA Stage.
Issue seen when gadget's dr_mode set to "otg" mode and connected
to MacOS.
Both are fixed and tested using USBCV Ch.9 tests.
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Fixes: fa389a6d7726 ("usb: dwc2: gadget: Add remote_wakeup_allowed flag")
Tested-by: Jack Mitchell <ml@embed.me.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
Moved ISOC request length checking from dwc2_hsotg_start_req() function to
dwc2_hsotg_ep_queue().
Fixes: 4fca54aa58293 ("usb: gadget: s3c-hsotg: add multi count support")
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
USB 3.x SuperSpeed peripherals can draw up to 900mA of VBUS power
when in configured state. However, if a configuration wanting to
take advantage of this is added with MaxPower greater than 500
(currently possible if using a ConfigFS gadget) the composite
driver fails to accommodate this for a couple reasons:
- usb_gadget_vbus_draw() when called from set_config() and
composite_resume() will be passed the MaxPower value without
regard for the current connection speed, resulting in a
violation for USB 2.0 since the max is 500mA.
- the bMaxPower of the configuration descriptor would be
incorrectly encoded, again if the connection speed is only
at USB 2.0 or below, likely wrapping around U8_MAX since
the 2mA multiplier corresponds to a maximum of 510mA.
Fix these by adding checks against the current gadget->speed
when the c->MaxPower value is used (set_config() and
composite_resume()) and appropriately limit based on whether
it is currently at a low-/full-/high- or super-speed connection.
Because 900 is not divisible by 8, with the round-up division
currently used in encode_bMaxPower() a MaxPower of 900mA will
result in an encoded value of 0x71. When a host stack (including
Linux and Windows) enumerates this on a single port root hub, it
reads this value back and decodes (multiplies by 8) to get 904mA
which is strictly greater than 900mA that is typically budgeted
for that port, causing it to reject the configuration. Instead,
we should be using the round-down behavior of normal integral
division so that 900 / 8 -> 0x70 or 896mA to stay within range.
And we might as well change it for the high/full/low case as well
for consistency.
N.B. USB 3.2 Gen N x 2 allows for up to 1500mA but there doesn't
seem to be any any peripheral controller supported by Linux that
does two lane operation, so for now keeping the clamp at 900
should be fine.
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
SuperSpeedPlus peripherals must report their bMaxPower of the
configuration descriptor in units of 8mA as per the USB 3.2
specification. The current switch statement in encode_bMaxPower()
only checks for USB_SPEED_SUPER but not USB_SPEED_SUPER_PLUS so
the latter falls back to USB 2.0 encoding which uses 2mA units.
Replace the switch with a simple if/else.
Fixes: eae5820b852f ("usb: gadget: composite: Write SuperSpeedPlus config descriptors")
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
Prior to commit eb9fecb9e69b ("usb: gadget: f_uac2: split out audio
core") the maximum packet size was calculated only from the high-speed
descriptor but now we use the largest of the full-speed and high-speed
descriptors.
This is correct, but the full-speed value is likely to be higher than
that for high-speed and this leads to submitting requests for OUT
transfers (received by the gadget) which are larger than the endpoint's
maximum packet size. These are rightly rejected by the gadget core.
config_ep_by_speed() already sets up the correct maximum packet size for
the enumerated speed in the usb_ep structure, so we can simply use this
instead of the overall value that has been used to allocate buffers for
requests.
Note that the minimum period for ALSA is still set from the largest
value, and this is unavoidable because it's possible to open the audio
device before the gadget has been enumerated.
Tested-by: Pavel Hofman <pavel.hofman@ivitera.com>
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
The current code in dwc3_gadget_ep_reclaim_completed_trb() will
check for IOC/LST bit in the event->status and returns if
IOC/LST bit is set. This logic doesn't work if multiple TRBs
are queued per request and the IOC/LST bit is set on the last
TRB of that request.
Consider an example where a queued request has multiple queued
TRBs and IOC/LST bit is set only for the last TRB. In this case,
the core generates XferComplete/XferInProgress events only for
the last TRB (since IOC/LST are set only for the last TRB). As
per the logic in dwc3_gadget_ep_reclaim_completed_trb()
event->status is checked for IOC/LST bit and returns on the
first TRB. This leaves the remaining TRBs left unhandled.
Similarly, if the gadget function enqueues an unaligned request
with sglist already in it, it should fail the same way, since we
will append another TRB to something that already uses more than
one TRB.
To aviod this, this patch changes the code to check for IOC/LST
bits in TRB->ctrl instead.
At a practical level, this patch resolves USB transfer stalls seen
with adb on dwc3 based HiKey960 after functionfs gadget added
scatter-gather support around v4.20.
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Yang Fei <fei.yang@intel.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Tejas Joglekar <tejas.joglekar@synopsys.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: Todd Kjos <tkjos@google.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Linux USB List <linux-usb@vger.kernel.org>
Cc: stable <stable@vger.kernel.org>
Tested-by: Tejas Joglekar <tejas.joglekar@synopsys.com>
Reviewed-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
[jstultz: forward ported to mainline, reworded commit log, reworked
to only check trb->ctrl as suggested by Felipe]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
Move the checking, buffer reserve and buffer commit code in
synth_event_trace_start/end() into inline functions
__synth_event_trace_start/end() so they can also be used by
synth_event_trace() and synth_event_trace_array(), and then have all
those functions use them.
Also, change synth_event_trace_state.enabled to disabled so it only
needs to be set if the event is disabled, which is not normally the
case.
Link: http://lkml.kernel.org/r/b1f3108d0f450e58192955a300e31d0405ab4149.1581374549.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
There's no reason to return -EINVAL when tracing a synthetic event if
it's soft disabled - treat it the same as if it were hard disabled and
return normally.
Have synth_event_trace() and synth_event_trace_array() just return
normally, and have synth_event_trace_start set the trace state to
disabled and return.
Link: http://lkml.kernel.org/r/df5d02a1625aff97c9866506c5bada6a069982ba.1581374549.git.zanussi@kernel.org
Fixes: 8dcc53ad956d2 ("tracing: Add synth_event_trace() and related functions")
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If the ring_buffer reserve in synth_event_trace_start() fails, the
matching ring_buffer_nest_end() should be called in the error code,
since nothing else will ever call it in this case.
Link: http://lkml.kernel.org/r/20abc444b3eeff76425f895815380abe7aa53ff8.1581374549.git.zanussi@kernel.org
Fixes: 8dcc53ad956d2 ("tracing: Add synth_event_trace() and related functions")
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"I made a mistake while removing cgroup task list lazy init
optimization making the root cgroup.procs show entries for the
init_tasks. The zero entries doesn't cause critical failures but does
make systemd print out warning messages during boot.
Fix it by omitting init_tasks as they should be"
* 'for-5.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: init_tasks shouldn't be linked to the root cgroup
|
|
With some shells, the command construed for install of bpf selftests becomes
too large due to long list of files:
make[1]: execvp: /bin/sh: Argument list too long
make[1]: *** [../lib.mk:73: install] Error 127
Currently, each of the file lists is replicated three times in the command:
in the shell 'if' condition, in the 'echo' and in the 'rsync'. Reduce that
by one instance by using make conditionals and separate the echo and rsync
into two shell commands. (One would be inclined to just remove the '@' at
the beginning of the rsync command and let 'make' echo it by itself;
unfortunately, it appears that the '@' in the front of mkdir silences output
also for the following commands.)
Also, separate handling of each of the lists to its own shell command.
The semantics of the makefile is unchanged before and after the patch. The
ability of individual test directories to override INSTALL_RULE is retained.
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Tested-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit 5f70bde26a48 ("selftests: fix build behaviour on targets' failures")
added a logic to track failure of builds of individual targets. However, it
does exactly the opposite of what a distro kernel needs: we create a RPM
package with a selected set of selftests and we need the build to fail if
build of any of the targets fail.
Both use cases are valid. A distribution kernel is in control of what is
included in the kernel and what is being built; any error needs to be
flagged and acted upon. A CI system that tries to build as many tests as
possible on the best effort basis is not really interested in a failure here
and there.
Support both use cases by introducing a FORCE_TARGETS variable. It is
switched off by default to make life for CI systems easier, distributions
can easily switch it on while building their packages.
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
tpm2 tests set fails if there is no /dev/tpm0 and /dev/tpmrm0
supported. Check if these files exist before run and mark test as
skipped in case of absence.
Signed-off-by: Nikita Sobolev <Nikita.Sobolev@synopsys.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
While running the ftracetests, the pid filter test failed because the
instance "foo" existed, and it was using it to rerun the test under a
instance named foo. The collision caused the test to fail as the mkdir
failed as the name already existed.
As of commit b5b77be812de7 ("selftests: ftrace: Allow some tests to be run
in a tracing instance") all a selftest needs to do to be tested in an
instance is to set the "instance" flag. There's no reason a selftest needs
to create an instance to run its test in an instance directly.
Remove the open coded testing in an instance for the pid filter test and
have it set the "instance" flag instead.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
There is a spelling mistake in a literal string, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux fixes from Paul Moore:
"Two small fixes: one fixes a locking problem in the recently merged
label translation code, the other fixes an embarrassing 'binderfs' /
'binder' filesystem name check"
* tag 'selinux-pr-20200210' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix sidtab string cache locking
selinux: fix typo in filesystem name
|
|
Commit e567cb3fef30 ("MAINTAINERS: add an entry for kfifo") added a new
entry to MAINTAINERS. Following the example of the previous entry on the
list I added a trailing ':' character at the end of the title line.
This however results in rather strange looking output from
scripts/get_maintainer.pl:
$ ./scripts/get_maintainer.pl ./0001-kfifo.patch
Stefani Seibold <stefani@seibold.net> (maintainer:KFIFO:)
linux-kernel@vger.kernel.org (open list)
It turns out there are more entries like this. Fix the entire file by
removing all trailing colons.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200130135515.30359-1-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following sparse warning:
kernel/bpf/btf.c:4131:5: warning: symbol 'btf_check_func_type_match' was
not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Hongbo Yao <yaohongbo@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200210011441.147102-1-yaohongbo@huawei.com
|
|
Fix following build error. We could push a tcp.h header into one of the
include paths, but I think its easy enough to simply pull in the three
defines we need here. If we end up using more of tcp.h at some point
we can pull it in later.
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c: In function ‘connected_socket_v4’:
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: error: ‘TCP_REPAIR_ON’ undeclared (first use in this function)
repair = TCP_REPAIR_ON;
^
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: note: each undeclared identifier is reported only once for each function it appears in
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:29:11: error: ‘TCP_REPAIR_OFF_NO_WP’ undeclared (first use in this function)
repair = TCP_REPAIR_OFF_NO_WP;
Then with fix,
$ ./test_progs -n 44
#44/1 sockmap create_update_free:OK
#44/2 sockhash create_update_free:OK
#44 sockmap_basic:OK
Fixes: 5d3919a953c3c ("selftests/bpf: Test freeing sockmap/sockhash with a socket in it")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158131347731.21414.12120493483848386652.stgit@john-Precision-5820-Tower
|
|
Suppress non-error messages when applying new bootconfig
to initrd image. To enable it, replace printf for error
message with pr_err() macro.
This also adds a testcase for this fix.
Link: http://lkml.kernel.org/r/158125351377.16911.13283712972275131160.stgit@devnote2
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
To reduce the large static array from kernel data, allocate
xbc_nodes array dynamically only if the kernel loads a
bootconfig.
Note that this also add dummy memblock.h for user-spacae
bootconfig tool.
Link: http://lkml.kernel.org/r/158108569699.3187.6512834527603883707.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Commit a6dbe4427559 ("vt: perform safe console erase in the right
order") provided fixes to an earlier commit by gathering all console
scrollback flushing operations in a function of its own. This includes
the invocation of vc_sw->con_switch() as previously done through a
update_screen() call. That commit failed to carry over the
con_is_visible() conditional though, as well as cursor handling, which
caused problems when "\e[3J" was written to a background console.
One could argue for preserving the call to update_screen(). However
this does far more than we need, and it is best to remove scrollback
assumptions from it. Instead let's gather the minimum needed to actually
perform scrollback flushing properly in that one place.
While at it, let's document the vc_sw->con_switch() side effect being
relied upon.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Reported-and-tested-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.2001281205560.1655@knanqh.ubzr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently CONFIG_FSI_MASTER_ASPEED=y implicitly depends on
CONFIG_HAS_IOMEM=y; consequently, on architectures without IOMEM we get
the following build error:
ld: drivers/fsi/fsi-master-aspeed.o: in function `fsi_master_aspeed_probe':
drivers/fsi/fsi-master-aspeed.c:436: undefined reference to `devm_ioremap_resource'
Fix the build error by adding the unspecified dependency.
Fixes: 606397d67f41 ("fsi: Add ast2600 master driver")
Cc: stable@vger.kernel.org
Reported-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200131034832.294268-1-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Explicitly state that all contributions to the kernel source tree
really are covered under this COPYING file in case someone thought
otherwise. Lawyers love to be pedantic, even more so than software
engineers at times, and this sentence makes them sleep easier.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200206154800.GA3754085@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update Microsoft contact from Sasha to James.
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
Link: https://lore.kernel.org/r/alpine.LRH.2.21.2002061006350.22130@namei.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
