Age | Commit message (Collapse) | Author |
|
New Allwinner SoCs only occasionally update their MMC IP, leading to many
pairs of compatible strings, though there are sometimes a number of them
being compatible with one particular SoC.
Collate the compatible string listing in the binding, to group those
being compatible together. This makes the list more readable, and allows
for easier addition of new SoC's MMC devices.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250307005712.16828-2-andre.przywara@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The SDHCI controller in Rockchip RK3528 is similar to the one included
in RK3588.
Add compatible string for the SDHCI controller in RK3528.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250305214108.1327208-2-jonas@kwiboo.se
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add RK3528 compatible string for SD/SDIO interface.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250309055348.9299-2-ziyao@disroot.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The SDHI/eMMC IPs in the RZ/G3E SoC are similar to those in R-Car Gen3.
However, the RZ/G3E SD0 channel has Voltage level control and PWEN pin
support via SD_STATUS register.
internal regulator support is added to control the voltage levels of
the SD pins via sd_iovs/sd_pwen bits in SD_STATUS register by populating
vqmmc-regulator child node.
SD1 and SD2 channels have gpio regulator support and internal regulator
support. Selection of the regulator is based on the regulator phandle.
Similar case for SD0 fixed voltage (eMMC) that uses fixed regulator and
SD0 non-fixed voltage (SD0) that uses internal regulator.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250305092958.21865-3-biju.das.jz@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The SD/MMC block on the RZ/G3E ("R9A09G047") SoC is similar to that
of the RZ/V2H, but the SD0 channel has only dedicated pins, so we must
use SD_STATUS register to control voltage and power enable (internal
regulator), for non-fixed voltage (SD) MMC interface. However, it is
optional for fixed voltage MMC interface (eMMC).
For SD1 and SD2 channels, we can either use gpio regulator or internal
regulator (using SD_STATUS register) for voltage switching.
Document RZ/G3E SDHI IP support with optional internal regulator for
both RZ/G3E and RZ/V2H SoC.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250305092958.21865-2-biju.das.jz@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The dw-mshc core on Rockchip's RK3562 is the same as the one already
included in RK3288. Extend the binding accordingly to allow
compatible = "rockchip,rk3562-dw-mshc", "rockchip,rk3288-dw-mshc";
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250227111913.2344207-4-kever.yang@rock-chips.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The eMMC core on Rockchip's RK3562 is the same as the one already
included in RK3588. Extend the binding accordingly to allow
compatible = "rockchip,rk3562-dwcmshc", "rockchip,rk3588-dwcmshc";
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250227111913.2344207-3-kever.yang@rock-chips.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Product names for some eMMC chips can include trailing whitespace, which
seems to be rather uncommon, but makes emitted messages and /sys properties
somewhat unsightly. Here's such an example from a Pine64 PineNote, in which
"Biwin ", as the eMMC product name, contains trailing whitespace:
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 Biwin 115 GiB
mmcblk0: p1 p2 p3 p4 p5 p6 p7
mmcblk0boot0: mmc0:0001 Biwin 4.00 MiB
mmcblk0boot1: mmc0:0001 Biwin 4.00 MiB
mmcblk0rpmb: mmc0:0001 Biwin 4.00 MiB, chardev (249:0)
Trailing whitespace in /sys properties may even cause some unforeseen issues
with some scripts, so let's have the trailing whitespace trimmed in product
names for eMMC chips. Although not observed yet by the author of these
changes, the same trailing whitespace may appear in SD card product names,
so let's trim them as well, which can't hurt.
Touch-up one comment as well, by using proper capitalization.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Acked-by: Avri Altman <avri.altman@sandisk.com>
Link: https://lore.kernel.org/r/fb7fcecae737f3e8b279854d7c853000527cba9a.1740597891.git.dsimic@manjaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Convert atmel,hsmci documentation to yaml format. The new file will inherit
from mmc-controller.yaml.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250224-mmc-slot-v4-2-231620a31e88@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The compatible property is required for some vendor-specific device trees,
such as Amlogic's meson-mx-sdio, but is unnecessary for others, like
Microchip's DTS. To resolve unintended warnings for configurations that do
not require it, remove compatible from the required properties in
mmc-slot.yaml.
Since meson-mx-sdio still requires compatible, explicitly add it to its
required list in amlogic,meson-mx-sdio.yaml.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250224-mmc-slot-v4-1-231620a31e88@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add compatible string "fsl,imx94-usdhc" for the i.MX94 chip, which is
backward compatible with i.MX8mm. Set it to fall back to
"fsl,imx8mm-usdhc".
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250306170937.242183-1-Frank.Li@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Unevaluated property
mmc-controller.yaml is common schema file. According to writing-schema.rst,
* additionalProperties: true
Rare case, used for schemas implementing common set of properties. Such
schemas are supposed to be referenced by other schemas, which then use
'unevaluatedProperties: false'. Typically bus or common-part schemas.
Reproduce steps:
1. Add unevaluated property 'abc' at example of fsl-imx-esdhc.yaml
2. Run make dt_binding_check DT_SCHEMA_FILES=fsl-imx-esdhc.yaml
No any warning report. But suppose report below warning:
mmc@70004000: Unevaluated properties are not allowed ('abc' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250220164655.2081224-1-Frank.Li@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add support for Exynos7870 DW MMC controllers, for both SMU and non-SMU
variants. These controllers require a quirk to access 64-bit FIFO in 32-bit
accesses (DW_MMC_QUIRK_FIFO64_32).
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250219-exynos7870-mmc-v2-3-b4255a3e39ed@disroot.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In certain DW MMC implementations (such as in some Exynos7870
controllers), 64-bit read/write is not allowed from a 64-bit FIFO.
Add a quirk which facilitates accessing the 64-bit FIFO registers in two
32-bit halves.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250219-exynos7870-mmc-v2-2-b4255a3e39ed@disroot.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Document the compatibles for Exynos7870's DW MMC driver, for both
non-SMU and SMU variants.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250219-exynos7870-mmc-v2-1-b4255a3e39ed@disroot.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Per the SD Host Controller Simplified Specification v4.20 §3.2.3, change
the SD card clock parameters only after first disabling the external card
clock. Doing this fixes a spurious clock pulse on Baytrail and Apollo Lake
SD controllers which otherwise breaks voltage switching with a specific
Swissbit SD card.
Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: Brad Mouring <brad.mouring@ni.com>
Signed-off-by: Erick Shepherd <erick.shepherd@ni.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250211214645.469279-1-erick.shepherd@ni.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
dwcmshc_phy_1_8v_init and dwcmshc_phy_3_3v_init differ only by a few
lines of code. This allow us to reuse code depending on voltage.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250131025406.1753513-1-jh80.chung@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
mmc_gpio_set_cd_isr() last use was removed in 2018 by
commit 7838a8ddc80b ("mmc: omap_hsmmc: Kill off cover detection")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250129214335.125292-1-linux@treblig.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Use the specified $(LD) when building userprogs with Clang
- Pass the correct target triple when compile-testing UAPI headers
with Clang
- Fix pacman-pkg build error with KBUILD_OUTPUT
* tag 'kbuild-fixes-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: install-extmod-build: Fix build when specifying KBUILD_OUTPUT
docs: Kconfig: fix defconfig description
kbuild: hdrcheck: fix cross build with clang
kbuild: userprogs: use correct lld when linking through clang
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for some reported issues. These
contain:
- typec driver fixes
- dwc3 driver fixes
- xhci driver fixes
- renesas controller fixes
- gadget driver fixes
- a new USB quirk added
All of these have been in linux-next with no reported issues"
* tag 'usb-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix NULL pointer access
usb: quirks: Add DELAY_INIT and NO_LPM for Prolific Mass Storage Card Reader
usb: xhci: Fix host controllers "dying" after suspend and resume
usb: dwc3: Set SUSPENDENABLE soon after phy init
usb: hub: lack of clearing xHC resources
usb: renesas_usbhs: Flush the notify_hotplug_work
usb: renesas_usbhs: Use devm_usb_get_phy()
usb: renesas_usbhs: Call clk_put()
usb: dwc3: gadget: Prevent irq storm when TH re-executes
usb: gadget: Check bmAttributes only if configuration is valid
xhci: Restrict USB4 tunnel detection for USB3 devices to Intel hosts
usb: xhci: Enable the TRB overfetch quirk on VIA VL805
usb: gadget: Fix setting self-powered state on suspend
usb: typec: ucsi: increase timeout for PPM reset operations
acpi: typec: ucsi: Introduce a ->poll_cci method
usb: typec: tcpci_rt1711h: Unmask alert interrupts to fix functionality
usb: gadget: Set self-powered based on MaxPower and bmAttributes
usb: gadget: u_ether: Set is_suspend flag if remote wakeup fails
usb: atm: cxacru: fix a flaw in existing endpoint checks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix that resolves a reported memory leak.
It's been in linux-next for 2 weeks now with no reported problems"
* tag 'driver-core-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: core: fix device leak in __fw_devlink_relax_cycles()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a number of misc and char and iio driver fixes that have been
sitting in my tree for way too long. They contain:
- iio driver fixes for reported issues
- regression fix for rtsx_usb card reader
- mei and mhi driver fixes
- small virt driver fixes
- ntsync permissions fix
- other tiny driver fixes for reported problems.
All of these have been in linux-next for quite a while with no
reported issues"
* tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"
ntsync: Check wait count based on byte size.
bus: simple-pm-bus: fix forced runtime PM use
char: misc: deallocate static minor in error path
eeprom: digsy_mtc: Make GPIO lookup table match the device
drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl
binderfs: fix use-after-free in binder_devices
slimbus: messaging: Free transaction ID in delayed interrupt scenario
vbox: add HAS_IOPORT dependency
cdx: Fix possible UAF error in driver_override_show()
intel_th: pci: Add Panther Lake-P/U support
intel_th: pci: Add Panther Lake-H support
intel_th: pci: Add Arrow Lake support
intel_th: msu: Fix less trivial kernel-doc warnings
intel_th: msu: Fix kernel-doc warnings
MAINTAINERS: change maintainer for FSI
ntsync: Set the permissions to be 0666
bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIO
mei: me: add panther lake P DID
...
|
|
Pull KVM fixes from Paolo Bonzini:
"arm64:
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode
x86:
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow
- Ensure DEBUGCTL is context switched on AMD to avoid running the
guest with the host's value, which can lead to unexpected bus lock
#DBs
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't
properly emulate BTF. KVM's lack of context switching has meant BTF
has always been broken to some extent
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as
the guest can enable DebugSwap without KVM's knowledge
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes
to RO memory" phase without actually generating a write-protection
fault
- Fix a printf() goof in the SEV smoke test that causes build
failures with -Werror
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when
PERFMON_V2 isn't supported by KVM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM
KVM: selftests: Fix printf() format goof in SEV smoke test
KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage
KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3
KVM: SVM: Save host DR masks on CPUs with DebugSwap
KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu()
KVM: arm64: Initialize HCR_EL2.E2H early
KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs
KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled
KVM: x86: Snapshot the host's DEBUGCTL in common x86
KVM: SVM: Suppress DEBUGCTL.BTF on AMD
KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value
KVM: selftests: Assert that STI blocking isn't set after event injection
KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow
|
|
into HEAD
KVM x86 fixes for 6.14-rcN #2
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.14, take #4
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"33 hotfixes. 24 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
26 are for MM and 7 are for non-MM.
- "mm: memory_failure: unmap poisoned folio during migrate properly"
from Ma Wupeng fixes a couple of two year old bugs involving the
migration of hwpoisoned folios.
- "selftests/damon: three fixes for false results" from SeongJae Park
fixes three one year old bugs in the SAMON selftest code.
The remainder are singletons and doubletons. Please see the individual
changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (33 commits)
mm/page_alloc: fix uninitialized variable
rapidio: add check for rio_add_net() in rio_scan_alloc_net()
rapidio: fix an API misues when rio_add_net() fails
MAINTAINERS: .mailmap: update Sumit Garg's email address
Revert "mm/page_alloc.c: don't show protection in zone's ->lowmem_reserve[] for empty zone"
mm: fix finish_fault() handling for large folios
mm: don't skip arch_sync_kernel_mappings() in error paths
mm: shmem: remove unnecessary warning in shmem_writepage()
userfaultfd: fix PTE unmapping stack-allocated PTE copies
userfaultfd: do not block on locking a large folio with raised refcount
mm: zswap: use ATOMIC_LONG_INIT to initialize zswap_stored_pages
mm: shmem: fix potential data corruption during shmem swapin
mm: fix kernel BUG when userfaultfd_move encounters swapcache
selftests/damon/damon_nr_regions: sort collected regiosn before checking with min/max boundaries
selftests/damon/damon_nr_regions: set ops update for merge results check to 100ms
selftests/damon/damos_quota: make real expectation of quota exceeds
include/linux/log2.h: mark is_power_of_2() with __always_inline
NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback
mm, swap: avoid BUG_ON in relocate_cluster()
mm: swap: use correct step in loop to wait all clusters in wait_for_allocation()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more x86 fixes from Ingo Molnar:
- Add more model IDs to the AMD microcode version check, more people
are hitting these checks
- Fix a Xen guest boot warning related to AMD northbridge setup
- Fix SEV guest bugs related to a recent changes in its locking logic
- Fix a missing definition of PTRS_PER_PMD that assembly builds can hit
* tag 'x86-urgent-2025-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Add some forgotten models to the SHA check
x86/mm: Define PTRS_PER_PMD for assembly code too
virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex
virt: sev-guest: Allocate request data dynamically
x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range()
|
|
Add some more forgotten models to the SHA check.
Fixes: 50cef76d5cb0 ("x86/microcode/AMD: Load only SHA256-checksummed patches")
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Toralf Förster <toralf.foerster@gmx.de>
Link: https://lore.kernel.org/r/20250307220256.11816-1-bp@kernel.org
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix bugs in kernel build, hibernation, memory management and KVM"
* tag 'loongarch-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Fix GPA size issue about VM
LoongArch: KVM: Reload guest CSR registers after sleep
LoongArch: KVM: Add interrupt checking for AVEC
LoongArch: Set hugetlb mmap base address aligned with pmd size
LoongArch: Set max_pfn with the PFN of the last page
LoongArch: Use polling play_dead() when resuming from hibernation
LoongArch: Eliminate superfluous get_numa_distances_cnt()
LoongArch: Convert unreachable() to BUG()
|
|
Physical address space is 48 bit on Loongson-3A5000 physical machine,
however it is 47 bit for VM on Loongson-3A5000 system. Size of physical
address space of VM is the same with the size of virtual user space (a
half) of physical machine.
Variable cpu_vabits represents user address space, kernel address space
is not included (user space and kernel space are both a half of total).
Here cpu_vabits, rather than cpu_vabits - 1, is to represent the size of
guest physical address space.
Also there is strict checking about page fault GPA address, inject error
if it is larger than maximum GPA address of VM.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
On host, the HW guest CSR registers are lost after suspend and resume
operation. Since last_vcpu of boot CPU still records latest vCPU pointer
so that the guest CSR register skips to reload when boot CPU resumes and
vCPU is scheduled.
Here last_vcpu is cleared so that guest CSR registers will reload from
scheduled vCPU context after suspend and resume.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
There is a newly added macro INT_AVEC with CSR ESTAT register, which is
bit 14 used for LoongArch AVEC support. AVEC interrupt status bit 14 is
supported with macro CSR_ESTAT_IS, so here replace the hard-coded value
0x1fff with macro CSR_ESTAT_IS so that the AVEC interrupt status is also
supported by KVM.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
With ltp test case "testcases/bin/hugefork02", there is a dmesg error
report message such as:
kernel BUG at mm/hugetlb.c:5550!
Oops - BUG[#1]:
CPU: 0 UID: 0 PID: 1517 Comm: hugefork02 Not tainted 6.14.0-rc2+ #241
Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
pc 90000000004eaf1c ra 9000000000485538 tp 900000010edbc000 sp 900000010edbf940
a0 900000010edbfb00 a1 9000000108d20280 a2 00007fffe9474000 a3 00007ffff3474000
a4 0000000000000000 a5 0000000000000003 a6 00000000003cadd3 a7 0000000000000000
t0 0000000001ffffff t1 0000000001474000 t2 900000010ecd7900 t3 00007fffe9474000
t4 00007fffe9474000 t5 0000000000000040 t6 900000010edbfb00 t7 0000000000000001
t8 0000000000000005 u0 90000000004849d0 s9 900000010edbfa00 s0 9000000108d20280
s1 00007fffe9474000 s2 0000000002000000 s3 9000000108d20280 s4 9000000002b38b10
s5 900000010edbfb00 s6 00007ffff3474000 s7 0000000000000406 s8 900000010edbfa08
ra: 9000000000485538 unmap_vmas+0x130/0x218
ERA: 90000000004eaf1c __unmap_hugepage_range+0x6f4/0x7d0
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000007 (+FPE +SXE +ASXE -BTE)
ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0)
PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
Process hugefork02 (pid: 1517, threadinfo=00000000a670eaf4, task=000000007a95fc64)
Call Trace:
[<90000000004eaf1c>] __unmap_hugepage_range+0x6f4/0x7d0
[<9000000000485534>] unmap_vmas+0x12c/0x218
[<9000000000494068>] exit_mmap+0xe0/0x308
[<900000000025fdc4>] mmput+0x74/0x180
[<900000000026a284>] do_exit+0x294/0x898
[<900000000026aa30>] do_group_exit+0x30/0x98
[<900000000027bed4>] get_signal+0x83c/0x868
[<90000000002457b4>] arch_do_signal_or_restart+0x54/0xfa0
[<90000000015795e8>] irqentry_exit_to_user_mode+0xb8/0x138
[<90000000002572d0>] tlb_do_page_fault_1+0x114/0x1b4
The problem is that base address allocated from hugetlbfs is not aligned
with pmd size. Here add a checking for hugetlbfs and align base address
with pmd size. After this patch the test case "testcases/bin/hugefork02"
passes to run.
This is similar to the commit 7f24cbc9c4d42db8a3c8484d1 ("mm/mmap: teach
generic_get_unmapped_area{_topdown} to handle hugetlb mappings").
Cc: stable@vger.kernel.org # 6.13+
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The current max_pfn equals to zero. In this case, it causes user cannot
get some page information through /proc filesystem such as kpagecount.
The following message is displayed by stress-ng test suite with command
"stress-ng --verbose --physpage 1 -t 1".
# stress-ng --verbose --physpage 1 -t 1
stress-ng: error: [1691] physpage: cannot read page count for address 0x134ac000 in /proc/kpagecount, errno=22 (Invalid argument)
stress-ng: error: [1691] physpage: cannot read page count for address 0x7ffff207c3a8 in /proc/kpagecount, errno=22 (Invalid argument)
stress-ng: error: [1691] physpage: cannot read page count for address 0x134b0000 in /proc/kpagecount, errno=22 (Invalid argument)
...
After applying this patch, the kernel can pass the test.
# stress-ng --verbose --physpage 1 -t 1
stress-ng: debug: [1701] physpage: [1701] started (instance 0 on CPU 3)
stress-ng: debug: [1701] physpage: [1701] exited (instance 0 on CPU 3)
stress-ng: debug: [1700] physpage: [1701] terminated (success)
Cc: stable@vger.kernel.org # 6.8+
Fixes: ff6c3d81f2e8 ("NUMA: optimize detection of memory with no node id assigned by firmware")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When CONFIG_RANDOM_KMALLOC_CACHES or other randomization infrastructrue
enabled, the idle_task's stack may different between the booting kernel
and target kernel. So when resuming from hibernation, an ACTION_BOOT_CPU
IPI wakeup the idle instruction in arch_cpu_idle_dead() and jump to the
interrupt handler. But since the stack pointer is changed, the interrupt
handler cannot restore correct context.
So rename the current arch_cpu_idle_dead() to idle_play_dead(), make it
as the default version of play_dead(), and the new arch_cpu_idle_dead()
call play_dead() directly. For hibernation, implement an arch-specific
hibernate_resume_nonboot_cpu_disable() to use the polling version (idle
instruction is replace by nop, and irq is disabled) of play_dead(), i.e.
poll_play_dead(), to avoid IPI handler corrupting the idle_task's stack
when resuming from hibernation.
This solution is a little similar to commit 406f992e4a372dafbe3c ("x86 /
hibernate: Use hlt_play_dead() when resuming from hibernation").
Cc: stable@vger.kernel.org
Tested-by: Erpeng Xu <xuerpeng@uniontech.com>
Tested-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In LoongArch, get_numa_distances_cnt() isn't in use, resulting in a
compiler warning.
Fix follow errors with clang-18 when W=1e:
arch/loongarch/kernel/acpi.c:259:28: error: unused function 'get_numa_distances_cnt' [-Werror,-Wunused-function]
259 | static inline unsigned int get_numa_distances_cnt(struct acpi_table_slit *slit)
| ^~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Link: https://lore.kernel.org/all/Z7bHPVUH4lAezk0E@kernel.org/
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When compiling on LoongArch, there exists the following objtool warning
in arch/loongarch/kernel/machine_kexec.o:
kexec_reboot() falls through to next function crash_shutdown_secondary()
Avoid using unreachable() as it can (and will in the absence of UBSAN)
generate fall-through code. Use BUG() so we get a "break BRK_BUG" trap
(with unreachable annotation).
Cc: stable@vger.kernel.org # 6.12+
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix return address recovery of traced function in ftrace to ensure
reliable stack unwinding
- Fix compiler warnings and runtime crashes of vDSO selftests on s390
by introducing a dedicated GNU hash bucket pointer with correct
32-bit entry size
- Fix test_monitor_call() inline asm, which misses CC clobber, by
switching to an instruction that doesn't modify CC
* tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ftrace: Fix return address recovery of traced function
selftests/vDSO: Fix GNU hash table entry size for s390x
s390/traps: Fix test_monitor_call() inline assembly
|
|
Andy reported the following build warning from head_32.S:
In file included from arch/x86/kernel/head_32.S:29:
arch/x86/include/asm/pgtable_32.h:59:5: error: "PTRS_PER_PMD" is not defined, evaluates to 0 [-Werror=undef]
59 | #if PTRS_PER_PMD > 1
The reason is that on 2-level i386 paging the folded in PMD's
PTRS_PER_PMD constant is not defined in assembly headers,
only in generic MM C headers.
Instead of trying to fish out the definition from the generic
headers, just define it - it even has a comment for it already...
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/Z8oa8AUVyi2HWfo9@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Stable fix for kmem_cache_destroy() called from a WQ_MEM_RECLAIM
workqueue causing a warning due to the new kvfree_rcu_barrier()
(Uladzislau Rezki)
* tag 'slab-for-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab/kvfree_rcu: Switch to WQ_MEM_RECLAIM wq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Restore the previous behavior of the ACPI platform_profile sysfs
interface that has been changed recently in a way incompatible with
the existing user space (Mario Limonciello)"
* tag 'acpi-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
platform/x86/amd: pmf: Add balanced-performance to hidden choices
platform/x86/amd: pmf: Add 'quiet' to hidden choices
ACPI: platform_profile: Add support for hidden choices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull core dumping fix from Kees Cook:
- Only sort VMAs when core_sort_vma sysctl is set
* tag 'execve-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
coredump: Only sort VMAs when core_sort_vma sysctl is set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix leaked extent map after error when reading chunks
- replace use of deprecated strncpy
- in zoned mode, fixed range when ulocking extent range, causing a hang
* tag 'for-6.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix a leaked chunk map issue in read_one_chunk()
btrfs: replace deprecated strncpy() with strscpy()
btrfs: zoned: fix extent range end unlock in cow_file_range()
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- TCP use after free fix on polling (Sagi)
- Controller memory buffer cleanup fixes (Icenowy)
- Free leaking requests on bad user passthrough commands (Keith)
- TCP error message fix (Maurizio)
- TCP corruption fix on partial PDU (Maurizio)
- TCP memory ordering fix for weakly ordered archs (Meir)
- Type coercion fix on message error for TCP (Dan)
- Name the RQF flags enum, fixing issues with anon enums and BPF import
of it
- ublk parameter setting fix
- GPT partition 7-bit conversion fix
* tag 'block-6.14-20250306' of git://git.kernel.dk/linux:
block: Name the RQF flags enum
nvme-tcp: fix signedness bug in nvme_tcp_init_connection()
block: fix conversion of GPT partition name to 7-bit
ublk: set_params: properly check if parameters can be applied
nvmet-tcp: Fix a possible sporadic response drops in weakly ordered arch
nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu()
nvme-tcp: Fix a C2HTermReq error message
nvmet: remove old function prototype
nvme-ioctl: fix leaked requests on mapping error
nvme-pci: skip CMB blocks incompatible with PCI P2P DMA
nvme-pci: clean up CMBMSC when registering CMB fails
nvme-tcp: fix possible UAF in nvme_tcp_poll
|
|
Pull io_uring fix from Jens Axboe:
"A single fix for a regression introduced in the 6.14 merge window,
causing stalls/hangs with IOPOLL reads or writes"
* tag 'io_uring-6.14-20250306' of git://git.kernel.dk/linux:
io_uring/rw: ensure reissue path is correctly handled for IOPOLL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc scheduler fixes from Ingo Molnar:
- Fix deadline scheduler sysctl parameter setting bug
- Fix RT scheduler sysctl parameter setting bug
- Fix possible memory corruption in child_cfs_rq_on_list()
* tag 'sched-urgent-2025-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt: Update limit of sched_rt sysctl in documentation
sched/deadline: Use online cpus for validating runtime
sched/fair: Fix potential memory corruption in child_cfs_rq_on_list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
"Fix a race between PMU registration and event creation, and fix
pmus_lock vs. pmus_srcu lock ordering"
* tag 'perf-urgent-2025-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix perf_pmu_register() vs. perf_init_event()
perf/core: Fix pmus_lock vs. pmus_srcu ordering
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix CPUID leaf 0x2 parsing bugs
- Sanitize very early boot parameters to avoid crash
- Fix size overflows in the SGX code
- Make CALL_NOSPEC use consistent
* tag 'x86-urgent-2025-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Sanitize boot params before parsing command line
x86/sgx: Fix size overflows in sgx_encl_create()
x86/cpu: Properly parse CPUID leaf 0x2 TLB descriptor 0x63
x86/cpu: Validate CPUID leaf 0x2 EDX output
x86/cacheinfo: Validate CPUID leaf 0x2 EDX output
x86/speculation: Add a conditional CS prefix to CALL_NOSPEC
x86/speculation: Simplify and make CALL_NOSPEC consistent
|