summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-27mm/mremap: fix vm_pgoff in vma_merge() case 3Vlastimil Babka
After upgrading build guests to v6.3, rpm started segfaulting for specific packages, which was bisected to commit 0503ea8f5ba7 ("mm/mmap: remove __vma_adjust()"). rpm is doing many mremap() operations with file mappings of its db. The problem is that in vma_merge() case 3 (we merge with the next vma, expanding it downwards) vm_pgoff is not adjusted as it should when vm_start changes. As a result the rpm process most likely sees data from the wrong offset of the file. Fix the vm_pgoff calculation. For case 8 this is a non-functional change as the resulting vm_pgoff is the same. Reported-and-bisected-by: Jiri Slaby <jirislaby@kernel.org> Reported-and-tested-by: Fabian Vogt <fvogt@suse.com> Link: https://bugzilla.suse.com/show_bug.cgi?id=1210903 Fixes: 0503ea8f5ba7 ("mm/mmap: remove __vma_adjust()") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-04-27ALSA: hda/realtek: Add quirk for ThinkPad P1 Gen 6Vitaly Rodionov
Lenovo ThinkPad P1 Gen 6 laptop has 2 CS35L41 amplifies on I2C bus connected to Realtek codec. Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230427110452.13787-1-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-04-27Merge branch 'for-linus' into for-nextTakashi Iwai
Merge 6.3-devel branch back in order to apply the more Realtek HD-audio changes cleanly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-04-27Merge branch 'macsec-fixes-for-cn10kb'Paolo Abeni
Geetha sowjanya says: ==================== Macsec fixes for CN10KB This patch set has fixes for the issues encountered while testing macsec on CN10KB silicon. Below is the description of patches: Patch 1: For each LMAC two MCSX_MCS_TOP_SLAVE_CHANNEL_CFG registers exist in CN10KB. Bypass has to be disabled in two registers. Patch 2: Add workaround for errata w.r.t accessing TCAM DATA and MASK registers. Patch 3: Fixes the parser configuration to allow PTP traffic. Patch 4: Addresses the IP vector and block level interrupt mask changes. Patch 5: Fix NULL pointer crashes when rebooting Patch 6: Since MCS is global block shared by all LMACS the TCAM match must include macsec DMAC also to distinguish each macsec interface Patch 7: Before freeing MCS hardware resource to AF clear the stats also. Patch 8: Stats which share single counter in hardware are tracked in software. This tracking was based on wrong secy mode params. Use correct secy mode params Patch 9: When updating secy mode params, PN number was also reset to initial values. Hence do not write to PN value register when updating secy. ==================== Link: https://lore.kernel.org/r/20230426062528.20575-1-gakula@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27octeontx2-pf: mcs: Do not reset PN while updating secySubbaraya Sundeep
After creating SecYs, SCs and SAs a SecY can be modified to change attributes like validation mode, protect frames mode etc. During this SecY update, packet number is reset to initial user given value by mistake. Hence do not reset PN when updating SecY parameters. Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27octeontx2-pf: mcs: Fix shared counters logicSubbaraya Sundeep
Macsec stats like InPktsLate and InPktsDelayed share same counter in hardware. If SecY replay_protect is true then counter represents InPktsLate otherwise InPktsDelayed. This mode change was tracked based on protect_frames instead of replay_protect mistakenly. Similarly InPktsUnchecked and InPktsOk share same counter and mode change was tracked based on validate_check instead of validate_disabled. This patch fixes those problems. Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27octeontx2-pf: mcs: Clear stats before freeing resourceSubbaraya Sundeep
When freeing MCS hardware resources like SecY, SC and SA the corresponding stats needs to be cleared. Otherwise previous stats are shown in newly created macsec interfaces. Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27octeontx2-pf: mcs: Match macsec ethertype along with DMACSubbaraya Sundeep
On CN10KB silicon a single hardware macsec block is present and offloads macsec operations for all the ethernet LMACs. TCAM match with macsec ethertype 0x88e5 alone at RX side is not sufficient to distinguish all the macsec interfaces created on top of netdevs. Hence append the DMAC of the macsec interface too. Otherwise the first created macsec interface only receives all the macsec traffic. Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27octeontx2-pf: mcs: Fix NULL pointer dereferencesSubbaraya Sundeep
When system is rebooted after creating macsec interface below NULL pointer dereference crashes occurred. This patch fixes those crashes by using correct order of teardown [ 3324.406942] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 3324.415726] Mem abort info: [ 3324.418510] ESR = 0x96000006 [ 3324.421557] EC = 0x25: DABT (current EL), IL = 32 bits [ 3324.426865] SET = 0, FnV = 0 [ 3324.429913] EA = 0, S1PTW = 0 [ 3324.433047] Data abort info: [ 3324.435921] ISV = 0, ISS = 0x00000006 [ 3324.439748] CM = 0, WnR = 0 .... [ 3324.575915] Call trace: [ 3324.578353] cn10k_mdo_del_secy+0x24/0x180 [ 3324.582440] macsec_common_dellink+0xec/0x120 [ 3324.586788] macsec_notify+0x17c/0x1c0 [ 3324.590529] raw_notifier_call_chain+0x50/0x70 [ 3324.594965] call_netdevice_notifiers_info+0x34/0x7c [ 3324.599921] rollback_registered_many+0x354/0x5bc [ 3324.604616] unregister_netdevice_queue+0x88/0x10c [ 3324.609399] unregister_netdev+0x20/0x30 [ 3324.613313] otx2_remove+0x8c/0x310 [ 3324.616794] pci_device_shutdown+0x30/0x70 [ 3324.620882] device_shutdown+0x11c/0x204 [ 966.664930] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 966.673712] Mem abort info: [ 966.676497] ESR = 0x96000006 [ 966.679543] EC = 0x25: DABT (current EL), IL = 32 bits [ 966.684848] SET = 0, FnV = 0 [ 966.687895] EA = 0, S1PTW = 0 [ 966.691028] Data abort info: [ 966.693900] ISV = 0, ISS = 0x00000006 [ 966.697729] CM = 0, WnR = 0 [ 966.833467] Call trace: [ 966.835904] cn10k_mdo_stop+0x20/0xa0 [ 966.839557] macsec_dev_stop+0xe8/0x11c [ 966.843384] __dev_close_many+0xbc/0x140 [ 966.847298] dev_close_many+0x84/0x120 [ 966.851039] rollback_registered_many+0x114/0x5bc [ 966.855735] unregister_netdevice_many.part.0+0x14/0xa0 [ 966.860952] unregister_netdevice_many+0x18/0x24 [ 966.865560] macsec_notify+0x1ac/0x1c0 [ 966.869303] raw_notifier_call_chain+0x50/0x70 [ 966.873738] call_netdevice_notifiers_info+0x34/0x7c [ 966.878694] rollback_registered_many+0x354/0x5bc [ 966.883390] unregister_netdevice_queue+0x88/0x10c [ 966.888173] unregister_netdev+0x20/0x30 [ 966.892090] otx2_remove+0x8c/0x310 [ 966.895571] pci_device_shutdown+0x30/0x70 [ 966.899660] device_shutdown+0x11c/0x204 [ 966.903574] __do_sys_reboot+0x208/0x290 [ 966.907487] __arm64_sys_reboot+0x20/0x30 [ 966.911489] el0_svc_handler+0x80/0x1c0 [ 966.915316] el0_svc+0x8/0x180 [ 966.918362] Code: f9400000 f9400a64 91220014 f94b3403 (f9400060) [ 966.924448] ---[ end trace 341778e799c3d8d7 ]--- Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27octeontx2-af: mcs: Fix MCS block interruptGeetha sowjanya
On CN10KB, MCS IP vector number, BBE and PAB interrupt mask got changed to support more block level interrupts. To address this changes, this patch fixes the bbe and pab interrupt handlers. Fixes: 6c635f78c474 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts") Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27octeontx2-af: mcs: Config parser to skip 8B headerGeetha sowjanya
When ptp timestamp is enabled in RPM, RPM will append 8B timestamp header for all RX traffic. MCS need to skip these 8 bytes header while parsing the packet header, so that correct tcam key is created for lookup. This patch fixes the mcs parser configuration to skip this 8B header for ptp packets. Fixes: ca7f49ff8846 ("octeontx2-af: cn10k: Introduce driver for macsec block.") Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27octeontx2-af: mcs: Write TCAM_DATA and TCAM_MASK registers at onceSubbaraya Sundeep
As per hardware errata on CN10KB, all the four TCAM_DATA and TCAM_MASK registers has to be written at once otherwise write to individual registers will fail. Hence write to all TCAM_DATA registers and then to all TCAM_MASK registers. Fixes: cfc14181d497 ("octeontx2-af: cn10k: mcs: Manage the MCS block hardware resources") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27octeonxt2-af: mcs: Fix per port bypass configGeetha sowjanya
For each lmac port, MCS has two MCS_TOP_SLAVE_CHANNEL_CONFIGX registers. For CN10KB both register need to be configured for the port level mcs bypass to work. This patch also sets bitmap of flowid/secy entry reserved for default bypass so that these entries can be shown in debugfs. Fixes: bd69476e86fc ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27ixgbe: Fix panic during XDP_TX with > 64 CPUsJohn Hickey
Commit 4fe815850bdc ("ixgbe: let the xdpdrv work with more than 64 cpus") adds support to allow XDP programs to run on systems with more than 64 CPUs by locking the XDP TX rings and indexing them using cpu % 64 (IXGBE_MAX_XDP_QS). Upon trying this out patch on a system with more than 64 cores, the kernel paniced with an array-index-out-of-bounds at the return in ixgbe_determine_xdp_ring in ixgbe.h, which means ixgbe_determine_xdp_q_idx was just returning the cpu instead of cpu % IXGBE_MAX_XDP_QS. An example splat: ========================================================================== UBSAN: array-index-out-of-bounds in /var/lib/dkms/ixgbe/5.18.6+focal-1/build/src/ixgbe.h:1147:26 index 65 is out of range for type 'ixgbe_ring *[64]' ========================================================================== BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 65 PID: 408 Comm: ksoftirqd/65 Tainted: G IOE 5.15.0-48-generic #54~20.04.1-Ubuntu Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.5.4 01/13/2020 RIP: 0010:ixgbe_xmit_xdp_ring+0x1b/0x1c0 [ixgbe] Code: 3b 52 d4 cf e9 42 f2 ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 55 b9 00 00 00 00 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 08 <44> 0f b7 47 58 0f b7 47 5a 0f b7 57 54 44 0f b7 76 08 66 41 39 c0 RSP: 0018:ffffbc3fcd88fcb0 EFLAGS: 00010282 RAX: ffff92a253260980 RBX: ffffbc3fe68b00a0 RCX: 0000000000000000 RDX: ffff928b5f659000 RSI: ffff928b5f659000 RDI: 0000000000000000 RBP: ffffbc3fcd88fce0 R08: ffff92b9dfc20580 R09: 0000000000000001 R10: 3d3d3d3d3d3d3d3d R11: 3d3d3d3d3d3d3d3d R12: 0000000000000000 R13: ffff928b2f0fa8c0 R14: ffff928b9be20050 R15: 000000000000003c FS: 0000000000000000(0000) GS:ffff92b9dfc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 000000011dd6a002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ixgbe_poll+0x103e/0x1280 [ixgbe] ? sched_clock_cpu+0x12/0xe0 __napi_poll+0x30/0x160 net_rx_action+0x11c/0x270 __do_softirq+0xda/0x2ee run_ksoftirqd+0x2f/0x50 smpboot_thread_fn+0xb7/0x150 ? sort_range+0x30/0x30 kthread+0x127/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x1f/0x30 </TASK> I think this is how it happens: Upon loading the first XDP program on a system with more than 64 CPUs, ixgbe_xdp_locking_key is incremented in ixgbe_xdp_setup. However, immediately after this, the rings are reconfigured by ixgbe_setup_tc. ixgbe_setup_tc calls ixgbe_clear_interrupt_scheme which calls ixgbe_free_q_vectors which calls ixgbe_free_q_vector in a loop. ixgbe_free_q_vector decrements ixgbe_xdp_locking_key once per call if it is non-zero. Commenting out the decrement in ixgbe_free_q_vector stopped my system from panicing. I suspect to make the original patch work, I would need to load an XDP program and then replace it in order to get ixgbe_xdp_locking_key back above 0 since ixgbe_setup_tc is only called when transitioning between XDP and non-XDP ring configurations, while ixgbe_xdp_locking_key is incremented every time ixgbe_xdp_setup is called. Also, ixgbe_setup_tc can be called via ethtool --set-channels, so this becomes another path to decrement ixgbe_xdp_locking_key to 0 on systems with more than 64 CPUs. Since ixgbe_xdp_locking_key only protects the XDP_TX path and is tied to the number of CPUs present, there is no reason to disable it upon unloading an XDP program. To avoid confusion, I have moved enabling ixgbe_xdp_locking_key into ixgbe_sw_init, which is part of the probe path. Fixes: 4fe815850bdc ("ixgbe: let the xdpdrv work with more than 64 cpus") Signed-off-by: John Hickey <jjh@daedalian.us> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230425170308.2522429-1-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27net/sched: act_pedit: free pedit keys on bail from offset checkPedro Tammela
Ido Schimmel reports a memleak on a syzkaller instance: BUG: memory leak unreferenced object 0xffff88803d45e400 (size 1024): comm "syz-executor292", pid 563, jiffies 4295025223 (age 51.781s) hex dump (first 32 bytes): 28 bd 70 00 fb db df 25 02 00 14 1f ff 02 00 02 (.p....%........ 00 32 00 00 1f 00 00 00 ac 14 14 3e 08 00 07 00 .2.........>.... backtrace: [<ffffffff81bd0f2c>] kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline] [<ffffffff81bd0f2c>] slab_post_alloc_hook mm/slab.h:772 [inline] [<ffffffff81bd0f2c>] slab_alloc_node mm/slub.c:3452 [inline] [<ffffffff81bd0f2c>] __kmem_cache_alloc_node+0x25c/0x320 mm/slub.c:3491 [<ffffffff81a865d9>] __do_kmalloc_node mm/slab_common.c:966 [inline] [<ffffffff81a865d9>] __kmalloc+0x59/0x1a0 mm/slab_common.c:980 [<ffffffff83aa85c3>] kmalloc include/linux/slab.h:584 [inline] [<ffffffff83aa85c3>] tcf_pedit_init+0x793/0x1ae0 net/sched/act_pedit.c:245 [<ffffffff83a90623>] tcf_action_init_1+0x453/0x6e0 net/sched/act_api.c:1394 [<ffffffff83a90e58>] tcf_action_init+0x5a8/0x950 net/sched/act_api.c:1459 [<ffffffff83a96258>] tcf_action_add+0x118/0x4e0 net/sched/act_api.c:1985 [<ffffffff83a96997>] tc_ctl_action+0x377/0x490 net/sched/act_api.c:2044 [<ffffffff83920a8d>] rtnetlink_rcv_msg+0x46d/0xd70 net/core/rtnetlink.c:6395 [<ffffffff83b24305>] netlink_rcv_skb+0x185/0x490 net/netlink/af_netlink.c:2575 [<ffffffff83901806>] rtnetlink_rcv+0x26/0x30 net/core/rtnetlink.c:6413 [<ffffffff83b21cae>] netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] [<ffffffff83b21cae>] netlink_unicast+0x5be/0x8a0 net/netlink/af_netlink.c:1365 [<ffffffff83b2293f>] netlink_sendmsg+0x9af/0xed0 net/netlink/af_netlink.c:1942 [<ffffffff8380c39f>] sock_sendmsg_nosec net/socket.c:724 [inline] [<ffffffff8380c39f>] sock_sendmsg net/socket.c:747 [inline] [<ffffffff8380c39f>] ____sys_sendmsg+0x3ef/0xaa0 net/socket.c:2503 [<ffffffff838156d2>] ___sys_sendmsg+0x122/0x1c0 net/socket.c:2557 [<ffffffff8381594f>] __sys_sendmsg+0x11f/0x200 net/socket.c:2586 [<ffffffff83815ab0>] __do_sys_sendmsg net/socket.c:2595 [inline] [<ffffffff83815ab0>] __se_sys_sendmsg net/socket.c:2593 [inline] [<ffffffff83815ab0>] __x64_sys_sendmsg+0x80/0xc0 net/socket.c:2593 The recently added static offset check missed a free to the key buffer when bailing out on error. Fixes: e1201bc781c2 ("net/sched: act_pedit: check static offsets a priori") Reported-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20230425144725.669262-1-pctammela@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27net/sched: flower: Fix wrong handle assignment during filter changeIvan Vecera
Commit 08a0063df3ae ("net/sched: flower: Move filter handle initialization earlier") moved filter handle initialization but an assignment of the handle to fnew->handle is done regardless of fold value. This is wrong because if fold != NULL (so fold->handle == handle) no new handle is allocated and passed handle is assigned to fnew->handle. Then if any subsequent action in fl_change() fails then the handle value is removed from IDR that is incorrect as we will have still valid old filter instance with handle that is not present in IDR. Fix this issue by moving the assignment so it is done only when passed fold == NULL. Prior the patch: [root@machine tc-testing]# ./tdc.py -d enp1s0f0np0 -e 14be Test 14be: Concurrently replace same range of 100k flower filters from 10 tc instances exit: 123 exit: 0 RTNETLINK answers: Invalid argument We have an error talking to the kernel Command failed tmp/replace_6:1885 All test results: 1..1 not ok 1 14be - Concurrently replace same range of 100k flower filters from 10 tc instances Command exited with 123, expected 0 RTNETLINK answers: Invalid argument We have an error talking to the kernel Command failed tmp/replace_6:1885 After the patch: [root@machine tc-testing]# ./tdc.py -d enp1s0f0np0 -e 14be Test 14be: Concurrently replace same range of 100k flower filters from 10 tc instances All test results: 1..1 ok 1 14be - Concurrently replace same range of 100k flower filters from 10 tc instances Fixes: 08a0063df3ae ("net/sched: flower: Move filter handle initialization earlier") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230425140604.169881-1-ivecera@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27rxrpc: Fix potential data race in rxrpc_wait_to_be_connected()David Howells
Inside the loop in rxrpc_wait_to_be_connected() it checks call->error to see if it should exit the loop without first checking the call state. This is probably safe as if call->error is set, the call is dead anyway, but we should probably wait for the call state to have been set to completion first, lest it cause surprise on the way out. Fix this by only accessing call->error if the call is complete. We don't actually need to access the error inside the loop as we'll do that after. This caused the following report: BUG: KCSAN: data-race in rxrpc_send_data / rxrpc_set_call_completion write to 0xffff888159cf3c50 of 4 bytes by task 25673 on cpu 1: rxrpc_set_call_completion+0x71/0x1c0 net/rxrpc/call_state.c:22 rxrpc_send_data_packet+0xba9/0x1650 net/rxrpc/output.c:479 rxrpc_transmit_one+0x1e/0x130 net/rxrpc/output.c:714 rxrpc_decant_prepared_tx net/rxrpc/call_event.c:326 [inline] rxrpc_transmit_some_data+0x496/0x600 net/rxrpc/call_event.c:350 rxrpc_input_call_event+0x564/0x1220 net/rxrpc/call_event.c:464 rxrpc_io_thread+0x307/0x1d80 net/rxrpc/io_thread.c:461 kthread+0x1ac/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 read to 0xffff888159cf3c50 of 4 bytes by task 25672 on cpu 0: rxrpc_send_data+0x29e/0x1950 net/rxrpc/sendmsg.c:296 rxrpc_do_sendmsg+0xb7a/0xc20 net/rxrpc/sendmsg.c:726 rxrpc_sendmsg+0x413/0x520 net/rxrpc/af_rxrpc.c:565 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x375/0x4c0 net/socket.c:2501 ___sys_sendmsg net/socket.c:2555 [inline] __sys_sendmmsg+0x263/0x500 net/socket.c:2641 __do_sys_sendmmsg net/socket.c:2670 [inline] __se_sys_sendmmsg net/socket.c:2667 [inline] __x64_sys_sendmmsg+0x57/0x60 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00000000 -> 0xffffffea Fixes: 9d35d880e0e4 ("rxrpc: Move client call connection to the I/O thread") Reported-by: syzbot+ebc945fdb4acd72cba78@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/000000000000e7c6d205fa10a3cd@google.com/ Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Dmitry Vyukov <dvyukov@google.com> cc: "David S. Miller" <davem@davemloft.net> cc: Eric Dumazet <edumazet@google.com> cc: Jakub Kicinski <kuba@kernel.org> cc: Paolo Abeni <pabeni@redhat.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/508133.1682427395@warthog.procyon.org.uk Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-26drm/amd/display: Lowering min Z8 residency timeLeo Chen
[Why & How] Per HW team request, we're lowering the minimum Z8 residency time to 2000us. This enables Z8 support for additional modes we were previously blocking like 2k>60hz Cc: stable@vger.kernel.org Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: fix flickering caused by S/G modeHamza Mahfooz
Currently, on a handful of ASICs. We allow the framebuffer for a given plane to exist in either VRAM or GTT. However, if the plane's new framebuffer is in a different memory domain than it's previous framebuffer, flipping between them can cause the screen to flicker. So, to fix this, don't perform an immediate flip in the aforementioned case. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354 Reviewed-by: Roman Li <Roman.Li@amd.com> Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)") Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Set min_width and min_height capability for DCN30Igor Kravchenko
Add min_width, min_height fields to dc_plane_cap structure. Set values to 16x16 for discrete ASICs, and 64x64 for others. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Isolate remaining FPU code in DCN32Jasdeep Dhillon
[Why] DCN32 resource contains code that uses FPU. [How] Moved code into DCN32 FPU Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jasdeep Dhillon <jasdeep.dhillon@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Update bounding box values for DCN321Aurabindo Pillai
[Why&how] Update bounding box values as per hardware spec Fixes: 197485c69543 ("drm/amd/display: Create dcn321_fpu file") Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Do not clear GPINT register when releasing DMUB from resetAurabindo Pillai
[Why & How] There's no need to clear GPINT register for DMUB when releasing it from reset. Fix that. Fixes: ac2e555e0a7f ("drm/amd/display: Add DMCUB source files and changes for DCN32/321") Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Reset OUTBOX0 r/w pointer on DMUB resetCruise Hung
[Why & How] We missed resetting OUTBOX0 mailbox r/w pointer on DMUB reset. Fix it. Fixes: 6ecf9773a503 ("drm/amd/display: Fix DMUB outbox trace in S4 (#4465)") Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Fixes for dcn32_clk_mgr implementationAurabindo Pillai
[Why&How] Fix CLK MGR early initialization and add logging. Fixes: 265280b99822 ("drm/amd/display: add CLKMGR changes for DCN32/321") Reviewed-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Disable migration to ensure consistency of per-CPU variableTianci Yin
[why] Since the variable fpu_recursion_depth is per-CPU type, it has one copy on each CPU, thread migration causes data consistency issue, then the call trace shows up. And preemption disabling can't prevent migration. [how] Disable migration to ensure consistency of fpu_recursion_depth. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Tianci Yin <tianci.yin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: remove incorrect early returnAurabindo Pillai
[Why&How] Remove incorrect early return in a device specific fifo reset workaround Reviewed-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Return error code on DSC atomic check failureHersen Wu
[Why&How] We were not returning -EINVAL on DSC atomic check fail. Add it. Fixes: 71be4b16d39a ("drm/amd/display: dsc validate fail not pass to atomic check") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Improvement for handling edp link training failsJingwen Zhu
[Why] The eDP retrain will cause the DPCD 300 to be reset to default. And cause the brightness can't be set correctly. [How] delete the call to edp panel power control in both enable_link_output/disable_link_output entirely and only call edp panel control in enable_link_dp and  disable_link_dp once. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Apply correct panel mode when reinitializing hardwareMichael Mityushkin
[Why] When link training during engine recovery, ASSR might fail causing panel mode to be reset to default. This should not happen for eDP as it will prevent the panel from turning back on. [How] Added dp_panel_mode to struct dc_link to remember previously applied panel mode. Do not reset panel mode to default while performing link training if previously used panel mode = eDP. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Michael Mityushkin <michael.mityushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: fix access hdcp_workqueue assertHersen Wu
[Why] hdcp are enabled for asics from raven. for old asics which hdcp are not enabled, hdcp_workqueue are null. some access to hdcp work queue are not guarded with pointer check. [How] add hdcp_workqueue pointer check before access workqueue. Fixes: 82986fd631fa ("drm/amd/display: save restore hdcp state when display is unplugged from mst hub") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2444 Reported-by: Niklāvs Koļesņikovs <89q1r14hd@relay.firefox.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-04-26drm/amd/display: Reduce SubVP + DRR stretch marginAlvin Lee
[Description] - Having excessively large margin causes failure in the static schedulability check in some cases for SubVP + DRR - 100us of DRR margin is sufficient based on a weeks worth of stress testing on different display configs Reviewed-by: Michael Strauss <Michael.Strauss@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: fix memleak in aconnector->timing_requestedHersen Wu
[Why] when amdgpu_dm_update_connector_after_detect is called two times successively with valid sink, memory allocated of aconnector->timing_requested for the first call is not free. this causes memeleak. [How] allocate memory only when aconnector->timing_requested is null. Reviewed-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Fix hang when skipping modesetAurabindo Pillai
[Why&How] When skipping full modeset since the only state change was a front porch change, the DC commit sequence requires extra checks to handle non existant plane states being asked to be removed from context. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: allow edp updates for virtual signalAlex Hung
[Why] When IGT's kms_hdmi_inject forces EDID for HDMI audio, dc rejects the request because virtual signal is not in dc_is_audio_capable_signal function. [How] Includes SIGNAL_TYPE_VIRTUAL as audio capable. Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenchieh Chien <wenchieh.chien@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: copy dmub caps to dc on dcn31Josip Pavic
[Why & How] Add code path to copy dmub caps to dc, which is missing on dcn31 Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Add missing WA and MCLK validationRodrigo Siqueira
When the commit fff7eb56b376 ("drm/amd/display: Don't set dram clock change requirement for SubVP") was merged, we missed some parts associated with the MCLK switch. This commit adds all the missing parts. Fixes: fff7eb56b376 ("drm/amd/display: Don't set dram clock change requirement for SubVP") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Block optimize on consecutive FAMS enablesWesley Chalmers
[WHY] It is possible to commit state multiple times in rapid succession with FAMS enabled; if each of these commits were to set optimized_required, then the user may see latency. [HOW] fw_based_mclk_switching is currently not used in dc->clk_mgr; use it to track whether the current state has FAMS enabled; if it has, then do not disable FAMS in prepare_bandwidth, and do not set optimized_required. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Do not set drr on pipe commitWesley Chalmers
[WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. [HOW] Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets optimized_required. This change expects that Freesync requests are blocked when optimized_required is true. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-27Merge tag 'drm-misc-next-fixes-2023-04-26' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next-fixes for v6.4-rc1: - Revert uAPI from accel/qaic. - Fix TTM build on archs where PMD_SHIFT is not constant. - Improve error handling in nt35950. - Fix double unregister in otm8009a when removing the driver. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/45757de9-75d8-5b41-f1f9-562a7c4675b9@linux.intel.com
2023-04-26blk-integrity: register sysfs attributes on struct deviceThomas Weißschuh
The "integrity" kobject only acted as a holder for static sysfs entries. It also was embedded into struct gendisk without managing it, violating assumptions of the driver core. Instead register the sysfs entries directly onto the struct device. Also drop the now unused member integrity_kobj from struct gendisk. Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20230309-kobj_release-gendisk_integrity-v3-3-ceccb4493c46@weissschuh.net Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-26blk-integrity: convert to struct device_attributeThomas Weißschuh
An upcoming patch will register the integrity attributes directly with the struct device kobject. For this the attributes have to be implemented in terms of struct device_attribute. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20230309-kobj_release-gendisk_integrity-v3-2-ceccb4493c46@weissschuh.net Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-26blk-integrity: use sysfs_emitThomas Weißschuh
The correct way to emit data into sysfs is via sysfs_emit(), use it. Also perform some trivial syntactic cleanups. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20230309-kobj_release-gendisk_integrity-v3-1-ceccb4493c46@weissschuh.net Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-26Merge tag 'net-next-6.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the default value allows for better BIG TCP performances - Reduce compound page head access for zero-copy data transfers - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible - Threaded NAPI improvements, adding defer skb free support and unneeded softirq avoidance - Address dst_entry reference count scalability issues, via false sharing avoidance and optimize refcount tracking - Add lockless accesses annotation to sk_err[_soft] - Optimize again the skb struct layout - Extends the skb drop reasons to make it usable by multiple subsystems - Better const qualifier awareness for socket casts BPF: - Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses - Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward - Add more precise memory usage reporting for all BPF map types - Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params - Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton - Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps - Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps - Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree - Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them - Add ARM32 USDT support to libbpf - Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations Protocols: - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value indicates the provenance of the IP address - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition - Add the handshake upcall mechanism, allowing the user-space to implement generic TLS handshake on kernel's behalf - Bridge: support per-{Port, VLAN} neighbor suppression, increasing resilience to nodes failures - SCTP: add support for Fair Capacity and Weighted Fair Queueing schedulers - MPTCP: delay first subflow allocation up to its first usage. This will allow for later better LSM interaction - xfrm: Remove inner/outer modes from input/output path. These are not needed anymore - WiFi: - reduced neighbor report (RNR) handling for AP mode - HW timestamping support - support for randomized auth/deauth TA for PASN privacy - per-link debugfs for multi-link - TC offload support for mac80211 drivers - mac80211 mesh fast-xmit and fast-rx support - enable Wi-Fi 7 (EHT) mesh support Netfilter: - Add nf_tables 'brouting' support, to force a packet to be routed instead of being bridged - Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header. This is needed for BIT TCP support - The iptables 32bit compat interface isn't compiled in by default anymore - Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used - Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device Driver API: - Remove redundant Device Control Error Reporting Enable, as PCI core has already error reporting enabled at enumeration time - Move Multicast DB netlink handlers to core, allowing devices other then bridge to use them - Allow the page_pool to directly recycle the pages from safely localized NAPI - Implement lockless TX queue stop/wake combo macros, allowing for further code de-duplication and sanitization - Add YNL support for user headers and struct attrs - Add partial YNL specification for devlink - Add partial YNL specification for ethtool - Add tc-mqprio and tc-taprio support for preemptible traffic classes - Add tx push buf len param to ethtool, specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device - Add basic LED support for switch/phy - Add NAPI documentation, stop relaying on external links - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory work to make the hardware timestamping layer selectable by user space - Add transceiver support and improve the error messages for CAN-FD controllers New hardware / drivers: - Ethernet: - AMD/Pensando core device support - MediaTek MT7981 SoC - MediaTek MT7988 SoC - Broadcom BCM53134 embedded switch - Texas Instruments CPSW9G ethernet switch - Qualcomm EMAC3 DWMAC ethernet - StarFive JH7110 SoC - NXP CBTX ethernet PHY - WiFi: - Apple M1 Pro/Max devices - RealTek rtl8710bu/rtl8188gu - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset - Bluetooth: - Realtek RTL8821CS, RTL8851B, RTL8852BS - Mediatek MT7663, MT7922 - NXP w8997 - Actions Semi ATS2851 - QTI WCN6855 - Marvell 88W8997 - Can: - STMicroelectronics bxcan stm32f429 Drivers: - Ethernet NICs: - Intel (1G, icg): - add tracking and reporting of QBV config errors - add support for configuring max SDU for each Tx queue - Intel (100G, ice): - refactor mailbox overflow detection to support Scalable IOV - GNSS interface optimization - Intel (i40e): - support XDP multi-buffer - nVidia/Mellanox: - add the support for linux bridge multicast offload - enable TC offload for egress and engress MACVLAN over bond - add support for VxLAN GBP encap/decap flows offload - extend packet offload to fully support libreswan - support tunnel mode in mlx5 IPsec packet offload - extend XDP multi-buffer support - support MACsec VLAN offload - add support for dynamic msix vectors allocation - drop RX page_cache and fully use page_pool - implement thermal zone to report NIC temperature - Netronome/Corigine: - add support for multi-zone conntrack offload - Solarflare/Xilinx: - support offloading TC VLAN push/pop actions to the MAE - support TC decap rules - support unicast PTP - Other NICs: - Broadcom (bnxt): enforce software based freq adjustments only on shared PHC NIC - RealTek (r8169): refactor to addess ASPM issues during NAPI poll - Micrel (lan8841): add support for PTP_PF_PEROUT - Cadence (macb): enable PTP unicast - Engleder (tsnep): add XDP socket zero-copy support - virtio-net: implement exact header length guest feature - veth: add page_pool support for page recycling - vxlan: add MDB data path support - gve: add XDP support for GQI-QPL format - geneve: accept every ethertype - macvlan: allow some packets to bypass broadcast queue - mana: add support for jumbo frame - Ethernet high-speed switches: - Microchip (sparx5): Add support for TC flower templates - Ethernet embedded switches: - Broadcom (b54): - configure 6318 and 63268 RGMII ports - Marvell (mv88e6xxx): - faster C45 bus scan - Microchip: - lan966x: - add support for IS1 VCAP - better TX/RX from/to CPU performances - ksz9477: add ETS Qdisc support - ksz8: enhance static MAC table operations and error handling - sama7g5: add PTP capability - NXP (ocelot): - add support for external ports - add support for preemptible traffic classes - Texas Instruments: - add CPSWxG SGMII support for J7200 and J721E - Intel WiFi (iwlwifi): - preparation for Wi-Fi 7 EHT and multi-link support - EHT (Wi-Fi 7) sniffer support - hardware timestamping support for some devices/firwmares - TX beacon protection on newer hardware - Qualcomm 802.11ax WiFi (ath11k): - MU-MIMO parameters support - ack signal support for management packets - RealTek WiFi (rtw88): - SDIO bus support - better support for some SDIO devices (e.g. MAC address from efuse) - RealTek WiFi (rtw89): - HW scan support for 8852b - better support for 6 GHz scanning - support for various newer firmware APIs - framework firmware backwards compatibility - MediaTek WiFi (mt76): - P2P support - mesh A-MSDU support - EHT (Wi-Fi 7) support - coredump support" * tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits) net: phy: hide the PHYLIB_LEDS knob net: phy: marvell-88x2222: remove unnecessary (void*) conversions tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp. net: amd: Fix link leak when verifying config failed net: phy: marvell: Fix inconsistent indenting in led_blink_set lan966x: Don't use xdp_frame when action is XDP_TX tsnep: Add XDP socket zero-copy TX support tsnep: Add XDP socket zero-copy RX support tsnep: Move skb receive action to separate function tsnep: Add functions for queue enable/disable tsnep: Rework TX/RX queue initialization tsnep: Replace modulo operation with mask net: phy: dp83867: Add led_brightness_set support net: phy: Fix reading LED reg property drivers: nfc: nfcsim: remove return value check of `dev_dir` net: phy: dp83867: Remove unnecessary (void*) conversions net: ethtool: coalesce: try to make user settings stick twice net: mana: Check if netdev/napi_alloc_frag returns single page net: mana: Rename mana_refill_rxoob and remove some empty lines net: veth: add page_pool stats ...
2023-04-27xfs: fix livelock in delayed allocation at ENOSPCDave Chinner
On a filesystem with a non-zero stripe unit and a large sequential write, delayed allocation will set a minimum allocation length of the stripe unit. If allocation fails because there are no extents long enough for an aligned minlen allocation, it is supposed to fall back to unaligned allocation which allows single block extents to be allocated. When the allocator code was rewritting in the 6.3 cycle, this fallback was broken - the old code used args->fsbno as the both the allocation target and the allocation result, the new code passes the target as a separate parameter. The conversion didn't handle the aligned->unaligned fallback path correctly - it reset args->fsbno to the target fsbno on failure which broke allocation failure detection in the high level code and so it never fell back to unaligned allocations. This resulted in a loop in writeback trying to allocate an aligned block, getting a false positive success, trying to insert the result in the BMBT. This did nothing because the extent already was in the BMBT (merge results in an unchanged extent) and so it returned the prior extent to the conversion code as the current iomap. Because the iomap returned didn't cover the offset we tried to map, xfs_convert_blocks() then retries the allocation, which fails in the same way and now we have a livelock. Reported-and-tested-by: Brian Foster <bfoster@redhat.com> Fixes: 85843327094f ("xfs: factor xfs_bmap_btalloc()") Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-04-26KVM: x86: Preserve TDP MMU roots until they are explicitly invalidatedSean Christopherson
Preserve TDP MMU roots until they are explicitly invalidated by gifting the TDP MMU itself a reference to a root when it is allocated. Keeping a reference in the TDP MMU fixes a flaw where the TDP MMU exhibits terrible performance, and can potentially even soft-hang a vCPU, if a vCPU frequently unloads its roots, e.g. when KVM is emulating SMI+RSM. When KVM emulates something that invalidates _all_ TLB entries, e.g. SMI and RSM, KVM unloads all of the vCPUs roots (KVM keeps a small per-vCPU cache of previous roots). Unloading roots is a simple way to ensure KVM flushes and synchronizes all roots for the vCPU, as KVM flushes and syncs when allocating a "new" root (from the vCPU's perspective). In the shadow MMU, KVM keeps track of all shadow pages, roots included, in a per-VM hash table. Unloading a shadow MMU root just wipes it from the per-vCPU cache; the root is still tracked in the per-VM hash table. When KVM loads a "new" root for the vCPU, KVM will find the old, unloaded root in the per-VM hash table. Unlike the shadow MMU, the TDP MMU doesn't track "inactive" roots in a per-VM structure, where "active" in this case means a root is either in-use or cached as a previous root by at least one vCPU. When a TDP MMU root becomes inactive, i.e. the last vCPU reference to the root is put, KVM immediately frees the root (asterisk on "immediately" as the actual freeing may be done by a worker, but for all intents and purposes the root is gone). The TDP MMU behavior is especially problematic for 1-vCPU setups, as unloading all roots effectively frees all roots. The issue is mitigated to some degree in multi-vCPU setups as a different vCPU usually holds a reference to an unloaded root and thus keeps the root alive, allowing the vCPU to reuse its old root after unloading (with a flush+sync). The TDP MMU flaw has been known for some time, as until very recently, KVM's handling of CR0.WP also triggered unloading of all roots. The CR0.WP toggling scenario was eventually addressed by not unloading roots when _only_ CR0.WP is toggled, but such an approach doesn't Just Work for emulating SMM as KVM must emulate a full TLB flush on entry and exit to/from SMM. Given that the shadow MMU plays nice with unloading roots at will, teaching the TDP MMU to do the same is far less complex than modifying KVM to track which roots need to be flushed before reuse. Note, preserving all possible TDP MMU roots is not a concern with respect to memory consumption. Now that the role for direct MMUs doesn't include information about the guest, e.g. CR0.PG, CR0.WP, CR4.SMEP, etc., there are _at most_ six possible roots (where "guest_mode" here means L2): 1. 4-level !SMM !guest_mode 2. 4-level SMM !guest_mode 3. 5-level !SMM !guest_mode 4. 5-level SMM !guest_mode 5. 4-level !SMM guest_mode 6. 5-level !SMM guest_mode And because each vCPU can track 4 valid roots, a VM can already have all 6 root combinations live at any given time. Not to mention that, in practice, no sane VMM will advertise different guest.MAXPHYADDR values across vCPUs, i.e. KVM won't ever use both 4-level and 5-level roots for a single VM. Furthermore, the vast majority of modern hypervisors will utilize EPT/NPT when available, thus the guest_mode=%true cases are also unlikely to be utilized. Reported-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com> Link: https://lore.kernel.org/all/959c5bce-beb5-b463-7158-33fc4a4f910c@linux.microsoft.com Link: https://lkml.kernel.org/r/20220209170020.1775368-1-pbonzini%40redhat.com Link: https://lore.kernel.org/all/20230322013731.102955-1-minipli@grsecurity.net Link: https://lore.kernel.org/all/000000000000a0bc2b05f9dd7fab@google.com Link: https://lore.kernel.org/all/000000000000eca0b905fa0f7756@google.com Cc: Ben Gardon <bgardon@google.com> Cc: David Matlack <dmatlack@google.com> Cc: stable@vger.kernel.org Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com> Link: https://lore.kernel.org/r/20230426220323.3079789-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-04-26hte: tegra-194: Use proper includesLinus Walleij
The test driver uses the gpiod consumer API so include the right <linux/gpio/consumer.h> header. This may cause a problem with struct of_device_id being implcitly pulled in by the legacy header <linux/gpio.h> so include <linux/mod_devicetable.h> explicitly as well. While at it, drop explicit moduleparam.h (it's included with module.h) and sort the headers. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Dipen Patel <dipenp@nvidia.com> Signed-off-by: Dipen Patel <dipenp@nvidia.com>
2023-04-26hte: Use device_match_of_node()ye xingchen
Replace the open-code with device_match_of_node(). Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Acked-by: Dipen Patel <dipenp@nvidia.com> Signed-off-by: Dipen Patel <dipenp@nvidia.com>
2023-04-26hte: tegra-194: Fix off by one in tegra_hte_map_to_line_id()Dan Carpenter
The "map_sz" is the number of elements in the "m" array so the > comparison needs to be changed to >= to prevent an out of bounds read. Fixes: 09574cca6ad6 ("hte: Add Tegra194 HTE kernel provider") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Dipen Patel <dipenp@nvidia.com> Signed-off-by: Dipen Patel <dipenp@nvidia.com>
2023-04-26hte: tegra: fix 'struct of_device_id' build errorArnd Bergmann
Without the extra #include, this driver produces a build failure in some configurations. drivers/hte/hte-tegra194-test.c:96:34: error: array type has incomplete element type 'struct of_device_id' 96 | static const struct of_device_id tegra_hte_test_of_match[] = { Fixes: 9a75a7cd03c9 ("hte: Add Tegra HTE test driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dipen Patel <dipenp@nvidia.com> Signed-off-by: Dipen Patel <dipenp@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-12 23:29:04 +0000