| Age | Commit message (Collapse) | Author |
|---|
|
An active work can have poll armed, hence it's not enough to just do
the async work removal and return the value if it's different from "not
found". Rather than make poll removal special, just fall through to do
the remaining type lookups and removals.
Reported-by: Florian Fischer <florian.fl.fischer@fau.de>
Link: https://lore.kernel.org/io-uring/20220118151337.fac6cthvbnu7icoc@pasture/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We have a gap where a worker removes an item from the work list and to
when it gets added as the workers active work. In this state, the work
item cannot be found by cancelations. This is a small window, but it does
exist.
Add a temporary pointer to a work item that isn't on the pending work
list anymore, but also not the active work. This is needed as we need
to drop the wqe lock in between grabbing the work item and marking it
as active, to ensure that signal based cancelations are properly
ordered.
Reported-by: Florian Fischer <florian.fl.fischer@fau.de>
Link: https://lore.kernel.org/io-uring/20220118151337.fac6cthvbnu7icoc@pasture/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rather than split these into two separate lookups and matches, combine
them into one loop. This will become important when we can guarantee
that we don't have a window where a pending work item isn't discoverable
in either state.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_wqe_cancel_pending_work() grabs it internally, grab it upfront
instead. For the running work cancelation, grab the lock around it as
well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation to nesting it under the wqe lock (which is raw due to
being acquired from the scheduler side), change the io_worker lock from
a normal spinlock to a raw spinlock.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We don't use 'work' anymore in the busy logic, remove the dead argument.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add two tests, one which asserts that ring buffer memory can be passed to
other helpers for populating its entry area, and another one where verifier
rejects different type of memory passed to bpf_ringbuf_submit().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
Assert that the verifier is rejecting invalid offsets on the ringbuf entries:
# ./test_verifier | grep ring
#947/u ringbuf: invalid reservation offset 1 OK
#947/p ringbuf: invalid reservation offset 1 OK
#948/u ringbuf: invalid reservation offset 2 OK
#948/p ringbuf: invalid reservation offset 2 OK
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
The bpf_ringbuf_submit() and bpf_ringbuf_discard() have ARG_PTR_TO_ALLOC_MEM
in their bpf_func_proto definition as their first argument, and thus both expect
the result from a prior bpf_ringbuf_reserve() call which has a return type of
RET_PTR_TO_ALLOC_MEM_OR_NULL.
While the non-NULL memory from bpf_ringbuf_reserve() can be passed to other
helpers, the two sinks (bpf_ringbuf_submit(), bpf_ringbuf_discard()) right now
only enforce a register type of PTR_TO_MEM.
This can lead to potential type confusion since it would allow other PTR_TO_MEM
memory to be passed into the two sinks which did not come from bpf_ringbuf_reserve().
Add a new MEM_ALLOC composable type attribute for PTR_TO_MEM, and enforce that:
- bpf_ringbuf_reserve() returns NULL or PTR_TO_MEM | MEM_ALLOC
- bpf_ringbuf_submit() and bpf_ringbuf_discard() only take PTR_TO_MEM | MEM_ALLOC
but not plain PTR_TO_MEM arguments via ARG_PTR_TO_ALLOC_MEM
- however, other helpers might treat PTR_TO_MEM | MEM_ALLOC as plain PTR_TO_MEM
to populate the memory area when they use ARG_PTR_TO_{UNINIT_,}MEM in their
func proto description
Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
Both bpf_ringbuf_submit() and bpf_ringbuf_discard() have ARG_PTR_TO_ALLOC_MEM
in their bpf_func_proto definition as their first argument. They both expect
the result from a prior bpf_ringbuf_reserve() call which has a return type of
RET_PTR_TO_ALLOC_MEM_OR_NULL.
Meaning, after a NULL check in the code, the verifier will promote the register
type in the non-NULL branch to a PTR_TO_MEM and in the NULL branch to a known
zero scalar. Generally, pointer arithmetic on PTR_TO_MEM is allowed, so the
latter could have an offset.
The ARG_PTR_TO_ALLOC_MEM expects a PTR_TO_MEM register type. However, the non-
zero result from bpf_ringbuf_reserve() must be fed into either bpf_ringbuf_submit()
or bpf_ringbuf_discard() but with the original offset given it will then read
out the struct bpf_ringbuf_hdr mapping.
The verifier missed to enforce a zero offset, so that out of bounds access
can be triggered which could be used to escalate privileges if unprivileged
BPF was enabled (disabled by default in kernel).
Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: <tr3e.wang@gmail.com> (SecCoder Security Lab)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
Right now the assertion on check_ptr_off_reg() is only enforced for register
types PTR_TO_CTX (and open coded also for PTR_TO_BTF_ID), however, this is
insufficient since many other PTR_TO_* register types such as PTR_TO_FUNC do
not handle/expect register offsets when passed to helper functions.
Given this can slip-through easily when adding new types, make this an explicit
allow-list and reject all other current and future types by default if this is
encountered.
Also, extend check_ptr_off_reg() to handle PTR_TO_BTF_ID as well instead of
duplicating it. For PTR_TO_BTF_ID, reg->off is used for BTF to match expected
BTF ids if struct offset is used. This part still needs to be allowed, but the
dynamic off from the tnum must be rejected.
Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Fixes: eaa6bcb71ef6 ("bpf: Introduce bpf_per_cpu_ptr()")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
Similar as with other pointer types where we use ldimm64, clear the register
content to zero first, and then populate the PTR_TO_FUNC type and subprogno
number. Currently this is not done, and leads to reuse of stale register
tracking data.
Given for special ldimm64 cases we always clear the register offset, make it
common for all cases, so it won't be forgotten in future.
Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
Generalize the check_ctx_reg() helper function into a more generic named one
so that it can be reused for other register types as well to check whether
their offset is non-zero. No functional change.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
The return value was never initialized so the cleanup code executed when
it isn't even necessary.
Just add proper error handling.
Fixes: ab50cb9df889 ("drm/radeon/radeon_kms: Fix a NULL pointer dereference in radeon_driver_open_kms()")
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
This fixes 892deb48269c ("drm/amdgpu: Separate vf2pf work item init from virt data exchange").
we should read pf2vf data based at mman.fw_vram_usage_va after gmc
sw_init. commit 892deb48269c breaks this logic.
[How]
calling amdgpu_virt_exchange_data in amdgpu_virt_init_data_exchange to
set the right base in the right sequence.
v2:
call amdgpu_virt_init_data_exchange after gmc sw_init to make data
exchange workqueue run
v3:
clean up the code logic
v4:
add some comment and make the code more readable
Fixes: 892deb48269c ("drm/amdgpu: Separate vf2pf work item init from virt data exchange")
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is a following patch to apply the workaround only on
those boards with a bad harvest table in ip discovery.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MS-SMB2 describe session sign like the following.
Session.SigningRequired MUST be set to TRUE under the following conditions:
- If the SMB2_NEGOTIATE_SIGNING_REQUIRED bit is set in the SecurityMode
field of the client request.
- If the SMB2_SESSION_FLAG_IS_GUEST bit is not set in the SessionFlags
field and Session.IsAnonymous is FALSE and either Connection.ShouldSign
or global RequireMessageSigning is TRUE.
When trying guest account connection using nautilus, The login failure
happened on session setup. ksmbd does not allow this connection
when the user is a guest and the connection sign is set. Just do not set
session sign instead of error response as described in the specification.
And this change improves the guest connection in Nautilus.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The "ksmbd_socket" variable is not initialized on this error path.
Cc: stable@vger.kernel.org
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
if the Channel of a SMB2 WRITE request is
SMB2_CHANNEL_RDMA_V1_INVALIDTE, a client
does not invalidate its memory regions but
ksmbd must do it by sending a SMB2 WRITE response
with IB_WR_SEND_WITH_INV.
But if errors occur while processing a SMB2
READ/WRITE request, ksmbd sends a response
with IB_WR_SEND. So a client could use memory
regions already in use.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In the October updates to MS-SMB2 two additional FSCTLs
were described. Add the missing defines for these,
as well as fix a typo in an earlier define.
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
"Stolen memory" is memory set aside for use by an Intel integrated GPU.
The intel_graphics_quirks() early quirk reserves this memory when it is
called for a GPU that appears in the intel_early_ids[] table of integrated
GPUs.
Previously intel_graphics_quirks() was marked as QFLAG_APPLY_ONCE, so it
was called only for the first Intel GPU found. If a discrete GPU happened
to be enumerated first, intel_graphics_quirks() was called for it but not
for any integrated GPU found later. Therefore, stolen memory for such an
integrated GPU was never reserved.
For example, this problem occurs in this Alderlake-P (integrated) + DG2
(discrete) topology where the DG2 is found first, but stolen memory is
associated with the integrated GPU:
- 00:01.0 Bridge
`- 03:00.0 DG2 discrete GPU
- 00:02.0 Integrated GPU (with stolen memory)
Remove the QFLAG_APPLY_ONCE flag and call intel_graphics_quirks() for every
Intel GPU. Reserve stolen memory for the first GPU that appears in
intel_early_ids[].
[bhelgaas: commit log, add code comment, squash in
https://lore.kernel.org/r/20220118190558.2ququ4vdfjuahicm@ldmartin-desk2]
Link: https://lore.kernel.org/r/20220114002843.2083382-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
|
|
Remove these unused ia32 compat declarations; all the bits involved have
either been withdrawn or hoisted to the VFS.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
|
|
elf_mcount_loc and mcount_sort_thread definitions are not
initialized immediately within the function, which can cause
the judgment logic to use uninitialized values when the
initialization logic of subsequent code fails.
Link: https://lkml.kernel.org/r/20211212113358.34208-2-yinan@linux.alibaba.com
Link: https://lkml.kernel.org/r/20220118065241.42364-1-yinan@linux.alibaba.com
Fixes: 72b3942a173c ("scripts: ftrace - move the sort-processing in ftrace_init")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When under stress, cleanup_net() can have to dismantle
netns in big numbers. ops_exit_list() currently calls
many helpers [1] that have no schedule point, and we can
end up with soft lockups, particularly on hosts
with many cpus.
Even for moderate amount of netns processed by cleanup_net()
this patch avoids latency spikes.
[1] Some of these helpers like fib_sync_up() and fib_sync_down_dev()
are very slow because net/ipv4/fib_semantics.c uses host-wide hash tables,
and ifindex is used as the only input of two hash functions.
ifindexes tend to be the same for all netns (lo.ifindex==1 per instance)
This will be fixed in a separate patch.
Fixes: 72ad937abd0a ("net: Add support for batching network namespace cleanups")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
bio_clone_fast() sets the cloned bio to have the same ->bi_bdev as the
source bio. This means that when request-based dm called setup_clone(),
the cloned bio had its ->bi_bdev pointing to the dm device. After Commit
0b6e522cdc4a ("blk-mq: use ->bi_bdev for I/O accounting")
__blk_account_io_start() started using the request's ->bio->bi_bdev for
I/O accounting, if it was set. This caused IO going to the underlying
devices to use the dm device for their I/O accounting.
Set up the proper ->bi_bdev in blk_rq_prep_clone based on the whole
device bdev for the queue the request is cloned onto.
Fixes: 0b6e522cdc4a ("blk-mq: use ->bi_bdev for I/O accounting")
Reported-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[hch: the commit message is mostly from a different patch from Benjamin]
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Link: https://lore.kernel.org/r/20220118070444.1241739-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Up to now cs35l41_hda_remove() returns zero unconditionally. Make it
return void instead which makes it easier to see in the callers that
there is no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220117220055.120955-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Clean up and simplify cs35l41_hda_bind function
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220117160830.709403-6-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220117160830.709403-5-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add switch default cases at gpio pins configs
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220117160830.709403-4-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Create own namespace and avoid polluting the global namespace
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220117160830.709403-3-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The test key now needs to be manually held when calling
cs35l41_register_errata_patch, after patch:
Add the missing function calls to this driver.
Fixes: f517ba4924ad ("ASoC: cs35l41: Add support for hibernate memory retention mode")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220117160830.709403-2-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
regmap_register_patch can't be used to apply the probe sequence as a
patch is already registers with the regmap by
cs35l41_register_errata_patch and only a single patch can be attached to
a single regmap. The driver doesn't currently rely on a cache sync to
re-apply this probe sequence so simply switch it to a multi write.
Fixes: 7b2f3eb492da ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220117160830.709403-1-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When the target is a pid, not started by 'perf stat' we need to disable
the events, and in that case there is no need to setup affinities as we
use a dummy CPU map, with just one entry set to -1.
So stop doing it to avoid this needless call to sched_getaffinity():
# strace -ke sched_getaffinity perf stat -e cycles -p 241957 sleep 1
<SNIP>
sched_getaffinity(0, 512, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]) = 8
> /usr/lib64/libc-2.33.so(sched_getaffinity@@GLIBC_2.3.4+0x1a) [0xe6eea]
> /var/home/acme/bin/perf(affinity__setup+0x6a) [0x532a2a]
> /var/home/acme/bin/perf(__evlist__disable.constprop.0+0x27) [0x4b9827]
> /var/home/acme/bin/perf(cmd_stat+0x29b5) [0x431725]
> /var/home/acme/bin/perf(run_builtin+0x6a) [0x4a2cfa]
> /var/home/acme/bin/perf(main+0x612) [0x40f8c2]
> /usr/lib64/libc-2.33.so(__libc_start_main+0xd4) [0x27b74]
> /var/home/acme/bin/perf(_start+0x2d) [0x40fadd]
<SNIP>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220117160931.1191712-5-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When the target is a pid, not started by 'perf stat' we need to enable
the events, and in that case there is no need to setup affinities as we
use a dummy CPU map, with just one entry set to -1.
So stop doing it to avoid this needless call to sched_getaffinity():
# strace -ke sched_getaffinity perf stat -e cycles -p 241957 sleep 1
<SNIP>
sched_getaffinity(0, 512, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]) = 8
> /usr/lib64/libc-2.33.so(sched_getaffinity@@GLIBC_2.3.4+0x1a) [0xe6eea]
> /var/home/acme/bin/perf(affinity__setup+0x6a) [0x5329ca]
> /var/home/acme/bin/perf(__evlist__enable.constprop.0+0x23) [0x4b9693]
> /var/home/acme/bin/perf(enable_counters+0x14d) [0x42de5d]
> /var/home/acme/bin/perf(cmd_stat+0x2358) [0x4310c8]
> /var/home/acme/bin/perf(run_builtin+0x6a) [0x4a2cfa]
> /var/home/acme/bin/perf(main+0x612) [0x40f8c2]
> /usr/lib64/libc-2.33.so(__libc_start_main+0xd4) [0x27b74]
> /var/home/acme/bin/perf(_start+0x2d) [0x40fadd]
<SNIP>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220117160931.1191712-4-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
I.e. the simple:
$ perf stat sleep 1
Uses a dummy CPU map and thus there is no need to setup/cleanup
affinities to avoid IPIs, etc.
With this we're down to a sched_getaffinity() call, in the libnuma
initialization, that probably can be removed in a followup patch.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220117160931.1191712-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Just like with free(), NULL is checked to avoid having all callers do
it.
Its convenient for when not using affinity setup/cleanup for dummy CPU
maps, i.e. CPU maps for pid targets.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220117160931.1191712-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Because of commit bf794bf52a80c627 ("powerpc/kprobes: Fix kallsyms
lookup across powerpc ABIv1 and ABIv2"), in ppc64 ABIv1, our perf
command eliminates the need to use the prefix "." at the symbol name.
But when the command "perf probe -a schedule" is executed on ppc64
ABIv1, it obtains two symbol address information through /proc/kallsyms,
for example:
cat /proc/kallsyms | grep -w schedule
c000000000657020 T .schedule
c000000000d4fdb8 D schedule
The symbol "D schedule" is not a function symbol, and perf will print:
"p:probe/schedule _text+13958584"Failed to write event: Invalid argument
Therefore, when searching symbols from map and adding probe point for
them, a symbol type check is added. If the type of symbol is not a
function, skip it.
Fixes: bf794bf52a80c627 ("powerpc/kprobes: Fix kallsyms lookup across powerpc ABIv1 and ABIv2")
Signed-off-by: Zechuan Chen <chenzechuan1@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jianlin Lv <Jianlin.Lv@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20211228111338.218602-1-chenzechuan1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now that have_bytes is never modified, we can simplify this function.
First, we move the check for negative entropy_count to be first. That
ensures that subsequent reads of this will be non-negative. Then,
have_bytes and ibytes can be folded into their one use site in the
min_t() function.
Suggested-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This is an old driver that has seen a lot of different eras of kernel
coding style. In an effort to make it easier to code for, unify the
coding style around the current norm, by accepting some of -- but
certainly not all of -- the suggestions from clang-format. This should
remove ambiguity in coding style, especially with regards to spacing,
when code is being changed or amended. Consequently it also makes code
review easier on the eyes, following one uniform style rather than
several.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This gets rid of another abstraction we no longer need. It would be nice
if we could instead make pool an array rather than a pointer, but the
latent entropy plugin won't be able to do its magic in that case. So
instead we put all accesses to the input pool's actual data through the
input_pool_data array directly.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The entropy estimator is calculated in terms of 1/8 bits, which means
there are various constants where things are shifted by 3. Move these
into our pool info enum with the other relevant constants. While we're
at it, move an English assertion about sizes into a proper BUILD_BUG_ON
so that the compiler can ensure this invariant.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The other pool constants are prepended with POOL_, but not these last
ones. Rename them. This will then let us move them into the enum in the
following commit.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
We already had the POOL_* constants, so deduplicate the older INPUT_POOL
ones. As well, fold EXTRACT_SIZE into the poolinfo enum, since it's
related.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
We no longer have an output pool. Rather, we have just a wakeup bits
threshold for /dev/random reads, presumably so that processes don't
hang. This value, random_write_wakeup_bits, is configurable anyway. So
all the no longer usefully named OUTPUT_POOL constants were doing was
setting a reasonable default for random_write_wakeup_bits. This commit
gets rid of the constants and just puts it all in the default value of
random_write_wakeup_bits.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Originally, the RNG used several pools, so having things abstracted out
over a generic entropy_store object made sense. These days, there's only
one input pool, and then an uneven mix of usage via the abstraction and
usage via &input_pool. Rather than this uneasy mixture, just get rid of
the abstraction entirely and have things always use the global. This
simplifies the code and makes reading it a bit easier.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This argument is always set to zero, as a result of us not caring about
keeping a certain amount reserved in the pool these days. So just remove
it and cleanup the function signatures.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
There were a few things added under the "if (fips_enabled)" banner,
which never really got completed, and the FIPS people anyway are
choosing a different direction. Rather than keep around this halfbaked
code, get rid of it so that we can focus on a single design of the RNG
rather than two designs.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Rather than using the userspace type, __uXX, switch to using uXX. And
rather than using variously chosen `char *` or `unsigned char *`, use
`u8 *` uniformly for things that aren't strings, in the case where we
are doing byte-by-byte traversal.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Now that we're only using one polynomial, we can cleanup its
representation into constants, instead of passing around pointers
dynamically to select different polynomials. This improves the codegen
and makes the code a bit more straightforward.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
s/or/for
Signed-off-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
