| Age | Commit message (Collapse) | Author |
|---|
|
LLP is supported by I2S and SDW platforms but not supported by HDA
platforms. This log is used to notify developer current LLP status
for current device. Since above case is known to developers, the log
is unnecessary and should be removed.
Fixes: 7cb19007baba ("ASoC: SOF: ipc4-pcm: add hw_params")
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240115092209.7184-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since 64f67b5240db ("leds: trigger: audio: Add an activate callback to
ensure the initial brightness is set") the audio triggers have an
activate callback which sets the LED brightness as soon as the
(default) trigger is bound to the LED device. So we can remove the
call to ledtrig_audio_get.
Positive side effect: We have no code dependency to ledtrig-audio any
longer, therefore, if built as module, it's no longer loaded if not
needed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/3dc9167d-fb33-43a6-baa6-dbef8b5da7b9@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recent code change introduced a few false-positive compile
warnings with -Wformat-trucation again. Suppress them by replacing
snprintf() with scnprintf().
Fixes: 0a995e38dc44 ("ALSA: scarlett2: Add support for software-controllable input gain")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401062344.AzZCYlpa-lkp@intel.com/
Link: https://lore.kernel.org/r/20240112171000.31855-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Clang static checker warning: Value stored to 'ret' is never read.
bgpio_init() returns error code if failed, it's better to add this
check.
Fixes: cd33f216d241 ("gpio: mlxbf3: Add gpio driver support")
Signed-off-by: Su Hui <suhui@nfschina.com>
[Bartosz: add the Fixes: tag]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Node address doesn't match reg property which is not correct.
Fixes: ba96b2e7974b ("dt-bindings: gpio: gpio-xilinx: Convert Xilinx axi gpio binding to YAML")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The "data->irqs[]" array holds unsigned int so this error handling will
not work correctly.
Fixes: eee636bff0dc ("gpio: rtd: Add support for Realtek DHC(Digital Home Center) RTD SoCs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Update the kernel-doc comments to catch up with the code changes and
fix the kernel-doc warnings:
debug.c:83: warning: Excess struct member 'stacktrace' description in 'dma_debug_entry'
debug.c:83: warning: Function parameter or struct member 'stack_len' not described in 'dma_debug_entry'
debug.c:83: warning: Function parameter or struct member 'stack_entries' not described in 'dma_debug_entry'
Fixes: 746017ed8d4d ("dma/debug: Simplify stracktrace retrieval")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: iommu@lists.linux.dev
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
It appears on TU106 GPUs (2070), that some of the nvdec engines
are in the runlist but have no valid nonstall interrupt, nouveau
didn't handle that too well.
This should let nouveau/gsp work on those.
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/all/20240110011826.3996289-1-airlied@gmail.com/
|
|
When smb2 leases is disable, ksmbd can send oplock break notification
and cause wait oplock break ack timeout. It may appear like hang when
accessing a directory. This patch make only v2 leases handle the
directory.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
A fix for the v3d register readout, and two compilation fixes for
rockchip.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/warlsyhbwarbezejzokxvrpnmvoaajonj6khjobvnfrhttrsks@fqoeqrjrct6l
|
|
The hotjoin syfs entry allows to enable or disable Hot-Join on the Current
Controller of the I3C Bus.
Link: https://lore.kernel.org/r/20240114225232.140860-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Fixes for kernel-doc warnings enforced in linux-next
- Another build warning fix for string formatting of intel_wakeref_t
- Display fixes for DP DSC BPC and C20 PLL state verification
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZZ_IOcLiDG9LJafO@jlahtine-mobl.ger.corp.intel.com
|
|
Fix warning found by
'scripts/kernel-doc -v -none include/linux/i3c/master.h'
include/linux/i3c/master.h:457: warning: Function parameter or member 'enable_hotjoin' not described in 'i3c_master_controller_ops'
include/linux/i3c/master.h:457: warning: Function parameter or member 'disable_hotjoin' not described in 'i3c_master_controller_ops'
include/linux/i3c/master.h:499: warning: Function parameter or member 'hotjoin' not described in 'i3c_master_controller'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240109052548.2128133-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Merge power-supply fixes branch, which I never send for
the v6.7 cycle.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The race is between the handling of a new TCP connection and
its disconnection. It leads to UAF on `struct tcp_transport` in
ksmbd_tcp_new_connection() function.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-22991
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If client send invalid mech token in session setup request, ksmbd
validate and make the error if it is invalid.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-22890
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Update ksmbd feature status in documentation file.
- add support for v2 lease feature and SMB3 CCM/GCM256 encryption.
- add planned compression, quic, gmac signing features.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In ravb_start_xmit(), ravb driver uses u32 variable to store result of
dma_map_single() call. Since ravb hardware has 32-bit address fields in
descriptors, this works properly when mapping is successful - it is
platform's job to provide mapping addresses that fit into hardware
limitations.
However, in failure case dma_map_single() returns DMA_MAPPING_ERROR
constant that is 64-bit when dma_addr_t is 64-bit. Storing this constant
in u32 leads to truncation, and further call to dma_mapping_error()
fails to notice the error.
Fix that by storing result of dma_map_single() in a dma_addr_t
variable.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
nuvoton,npcm750-pwm-fan
Commit 89fec128d5d1 ("hwmon: (npcm750-pwm-fan) Add NPCM8xx support")
introduced support for PWM fans on Nuvoton's npcm845 SoC. This chip
supports three PWM modules with four PWM channels each. The older npcm750
only supported two PWM modules. The commit did not take into account that
the older SoC only supported two PWM modules. This results in a crash if
npcm750 is instantiated when the code attempts to instantiate the
non-existing third PWM module.
Unable to handle kernel paging request at virtual address e0aa2000 when write
[e0aa2000] *pgd=04ab6811, *pte=00000000, *ppte=00000000
Internal error: Oops: 807 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G N 6.7.0-next-20240112-dirty #3
Hardware name: NPCM7XX Chip family
PC is at npcm7xx_pwm_fan_probe+0x204/0x890
LR is at arm_heavy_mb+0x1c/0x38
Fix the problem by detecting the number of supported PWM modules in the
probe function and only instantiating the supported modules.
Fixes: 89fec128d5d1 ("hwmon: (npcm750-pwm-fan) Add NPCM8xx support")
Cc: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
This is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/bf257b1078475a415cdc3344c6a750842946e367.1705222845.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add myself as driver maintainer and restore the maintained status.
While at it, update the file field to cover mvneta_bm part of the driver.
Signed-off-by: Marcin Wojtas <marcin.s.wojtas@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
John Fastabend says:
====================
tls fixes for SPLICE with more hint
Syzbot found a splat where it tried to splice data over a tls socket
with the more hint and sending greater than the number of frags that
fit in a msg scatterlist. This resulted in an error where we do not
correctly send the data when the msg sg is full. The more flag being
just a hint not a strict contract. This then results in the syzbot
warning on the next send.
Edward generated an initial patch for this which checked for a full
msg on entry to the sendmsg hook. This fixed the WARNING, but didn't
fully resolve the issue because the full msg_pl scatterlist was never
sent resulting in a stuck socket. In this series instead avoid the
situation by forcing the send on the splice that fills the scatterlist.
Also in original thread I mentioned it didn't seem to be enough to
simply fix the send on full sg problem. That was incorrect and was
really a bug in my test program that was hanging the test program.
I had setup a repair socket and wasn't handling it correctly so my
tester got stuck.
Thanks. Please review. Fix in patch 1 and test in patch 2.
v2: use SPLICE_F_ flag names instead of cryptic 0xe
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot found an error with how splice() is handled with a msg greater
than 32. This was fixed in previous patch, but lets add a test for
it to ensure it continues to work.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A splice with MSG_SPLICE_PAGES will cause tls code to use the
tls_sw_sendmsg_splice path in the TLS sendmsg code to move the user
provided pages from the msg into the msg_pl. This will loop over the
msg until msg_pl is full, checked by sk_msg_full(msg_pl). The user
can also set the MORE flag to hint stack to delay sending until receiving
more pages and ideally a full buffer.
If the user adds more pages to the msg than can fit in the msg_pl
scatterlist (MAX_MSG_FRAGS) we should ignore the MORE flag and send
the buffer anyways.
What actually happens though is we abort the msg to msg_pl scatterlist
setup and then because we forget to set 'full record' indicating we
can no longer consume data without a send we fallthrough to the 'continue'
path which will check if msg_data_left(msg) has more bytes to send and
then attempts to fit them in the already full msg_pl. Then next
iteration of sender doing send will encounter a full msg_pl and throw
the warning in the syzbot report.
To fix simply check if we have a full_record in splice code path and
if not send the msg regardless of MORE flag.
Reported-and-tested-by: syzbot+f2977222e0e95cec15c8@syzkaller.appspotmail.com
Reported-by: Edward Adam Davis <eadavis@qq.com>
Fixes: fe1e81d4f73b ("tls/sw: Support MSG_SPLICE_PAGES")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prepare input updates for 6.8 merge window.
|
|
Add CMDQ driver support for mt8188 by adding its compatible and
driver data in CMDQ driver.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Sort cmdq platform data according to the number sequence of
compatible names.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Rename gce_plat variable postfix from 'v1~v7' to SoC names.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Communication Controller
Document the Inter-Processor Communication Controller on the X1E80100 Platform.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
kernel test robot reports 2 Excess struct member warnings:
zynqmp-ipi-mailbox.c:92: warning: Excess struct member 'irq' description in 'zynqmp_ipi_mbox'
zynqmp-ipi-mailbox.c:112: warning: Excess struct member 'ipi_mboxes' description in 'zynqmp_ipi_pdata'
The second one is a false positive that is caused by the
__counted_by() attribute. Kees has posted a patch for that, so just
fix the first one.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312150705.glrQ4ypv-lkp@intel.com/
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Add documentation for AMD-Xilinx Versal platform Inter Processor Interrupt
controller. Versal IPI controller contains buffer-less IPI which do not
have buffers for message passing. For such IPI channels message buffers
are not expected and only notification to/from remote agent is expected.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
"xlnx,ipi-id" is handled as required property but is
missing from binding doc required list of mailbox child node.
Add that to required list. This does not break backward
compatibility but bug in bindings document.
Fixes: 4a855a957936 ("dt-bindings: mailbox: zynqmp_ipi: convert to yaml")
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Message Handling Unit version is v2.1.
When arm_mhuv2 working with the data protocol transfer mode.
We have split one mhu into two channels, and every channel
include four channel windows, the two channels share
one gic spi interrupt.
There is a problem with the sending scenario.
The first channel will take up 0-3 channel windows, and the second
channel take up 4-7 channel windows. When the first channel send the
data, and the receiver will clear all the four channels status.
Although we only enabled the interrupt on the last channel window with
register CH_INT_EN,the register CHCOMB_INT_ST0 will be 0xf, not be 0x8.
Currently we just clear the last channel windows int status with the
data proctol mode.So after that,the CHCOMB_INT_ST0 status will be 0x7,
not be the 0x0.
Then the second channel send the data, the receiver read the
data, clear all the four channel windows status, trigger the sender
interrupt. But currently the CHCOMB_INT_ST0 register will be 0xf7,
get_irq_chan_comb function will always return the first channel.
So this patch clear all channel windows int status to avoid this interrupt
confusion.
Signed-off-by: Xiaowu.ding <xiaowu.ding@jaguarmicro.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Similarly to previous commit e17225887005 ("mailbox: qcom-apcs-ipc: do
not grow the of_device_id"), move compatibles with fallbacks in the
of_device_id table, to indicate these are not necessary. This only
shuffles the code. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Rework the compatibles and group devices which have similar interface
(same from Linux driver point of view) as compatible. This allows
smaller of_device_id table in the Linux driver and smaller
allOf:if:then: constraints.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
qcom,ipq8074-apcs-apps-global
qcom,ipq8074-apcs-apps-global compatible is listed in two places: with
and without fallback. Drop the second case to match DTS.
Fixes: 34d8775a0edc ("dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Martin KaFai Lau says:
====================
bpf: Fix backward progress bug in bpf_iter_udp
From: Martin KaFai Lau <martin.lau@kernel.org>
This patch set fixes an issue in bpf_iter_udp that makes backward
progress and prevents the user space process from finishing. There is
a test at the end to reproduce the bug.
Please see individual patches for details.
v3:
- Fixed the iter_fd check and local_port check in the
patch 3 selftest. (Yonghong)
- Moved jhash2 to test_jhash.h in the patch 3. (Yonghong)
- Added explanation in the bucket selection in the patch 3. (Yonghong)
v2:
- Added patch 1 to fix another bug that goes back to
the previous bucket
- Simplify the fix in patch 2 to always reset iter->offset to 0
- Add a test case to close all udp_sk in a bucket while
in the middle of the iteration.
====================
Link: https://lore.kernel.org/r/20240112190530.3751661-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The patch adds a test to exercise the bpf_iter_udp batching
logic. It specifically tests the case that there are multiple
so_reuseport udp_sk in a bucket of the udp_table.
The test creates two sets of so_reuseport sockets and
each set on a different port. Meaning there will be
two buckets in the udp_table.
The test does the following:
1. read() 3 out of 4 sockets in the first bucket.
2. close() all sockets in the first bucket. This
will ensure the current bucket's offset in
the kernel does not affect the read() of the
following bucket.
3. read() all 4 sockets in the second bucket.
The test also reads one udp_sk at a time from
the bpf_iter_udp prog. The true case in
"do_test(..., bool onebyone)". This is the buggy case
that the previous patch fixed.
It also tests the "false" case in "do_test(..., bool onebyone)",
meaning the userspace reads the whole bucket. There is
no bug in this case but adding this test also while
at it.
Considering the way to have multiple tcp_sk in the same
bucket is similar (by using so_reuseport),
this patch also tests the bpf_iter_tcp even though the
bpf_iter_tcp batching logic works correctly.
Both IP v4 and v6 are exercising the same bpf_iter batching
code path, so only v6 is tested.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240112190530.3751661-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
