summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-02-09net: wwan: t7xx: Add fastboot WWAN portJinjian Song
On early detection of wwan device in fastboot mode, driver sets up CLDMA0 HW tx/rx queues for raw data transfer and then create fastboot port to userspace. Application can use this port to flash firmware and collect core dump by fastboot protocol commands. E.g., flash firmware through fastboot port: - "download:%08x": write data to memory with the download size. - "flash:%s": write the previously downloaded image to the named partition. - "reboot": reboot the device. Link: https://android.googlesource.com/platform/system/core/+/refs/heads/main/fastboot/README.md Signed-off-by: Jinjian Song <jinjian.song@fibocom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-09net: wwan: t7xx: Infrastructure for early port configurationJinjian Song
To support cases such as FW update or Core dump, the t7xx device is capable of signaling the host that a special port needs to be created before the handshake phase. Adds the infrastructure required to create the early ports which also requires a different configuration of CLDMA queues. Base on the v5 patch version of follow series: 'net: wwan: t7xx: fw flashing & coredump support' (https://patchwork.kernel.org/project/netdevbpf/patch/3777bb382f4b0395cb594a602c5c79dbab86c9e0.1674307425.git.m.chetan.kumar@linux.intel.com/) Signed-off-by: Jinjian Song <jinjian.song@fibocom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-09net: wwan: t7xx: Add sysfs attribute for device state machineJinjian Song
Add support for userspace to get/set the device mode, device's state machine changes between (unknown/ready/reset/fastboot). Get the device state mode: - 'cat /sys/bus/pci/devices/${bdf}/t7xx_mode' Set the device state mode: - reset(cold reset): 'echo reset > /sys/bus/pci/devices/${bdf}/t7xx_mode' - fastboot: 'echo fastboot_switching > /sys/bus/pci/devices/${bdf}/t7xx_mode' Reload driver to get the new device state after setting operation. Signed-off-by: Jinjian Song <jinjian.song@fibocom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-09wwan: core: Add WWAN fastboot port typeJinjian Song
Add a new WWAN port that connects to the device fastboot protocol interface. Signed-off-by: Jinjian Song <jinjian.song@fibocom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-09tracing: Fix wasted memory in saved_cmdlines logicSteven Rostedt (Google)
While looking at improving the saved_cmdlines cache I found a huge amount of wasted memory that should be used for the cmdlines. The tracing data saves pids during the trace. At sched switch, if a trace occurred, it will save the comm of the task that did the trace. This is saved in a "cache" that maps pids to comms and exposed to user space via the /sys/kernel/tracing/saved_cmdlines file. Currently it only caches by default 128 comms. The structure that uses this creates an array to store the pids using PID_MAX_DEFAULT (which is usually set to 32768). This causes the structure to be of the size of 131104 bytes on 64 bit machines. In hex: 131104 = 0x20020, and since the kernel allocates generic memory in powers of two, the kernel would allocate 0x40000 or 262144 bytes to store this structure. That leaves 131040 bytes of wasted space. Worse, the structure points to an allocated array to store the comm names, which is 16 bytes times the amount of names to save (currently 128), which is 2048 bytes. Instead of allocating a separate array, make the structure end with a variable length string and use the extra space for that. This is similar to a recommendation that Linus had made about eventfs_inode names: https://lore.kernel.org/all/20240130190355.11486-5-torvalds@linux-foundation.org/ Instead of allocating a separate string array to hold the saved comms, have the structure end with: char saved_cmdlines[]; and round up to the next power of two over sizeof(struct saved_cmdline_buffers) + num_cmdlines * TASK_COMM_LEN It will use this extra space for the saved_cmdline portion. Now, instead of saving only 128 comms by default, by using this wasted space at the end of the structure it can save over 8000 comms and even saves space by removing the need for allocating the other array. Link: https://lore.kernel.org/linux-trace-kernel/20240209063622.1f7b6d5f@rorschach.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Mete Durlu <meted@linux.ibm.com> Fixes: 939c7a4f04fcd ("tracing: Introduce saved_cmdlines_size file") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-02-09of: property: Add in-ports/out-ports support to of_graph_get_port_parent()Saravana Kannan
Similar to the existing "ports" node name, coresight device tree bindings have added "in-ports" and "out-ports" as standard node names for a collection of ports. Add support for these name to of_graph_get_port_parent() so that remote-endpoint parsing can find the correct parent node for these coresight ports too. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20240207011803.2637531-4-saravanak@google.com Signed-off-by: Rob Herring <robh@kernel.org>
2024-02-09of: property: Improve finding the supplier of a remote-endpoint propertySaravana Kannan
After commit 4a032827daa8 ("of: property: Simplify of_link_to_phandle()"), remote-endpoint properties created a fwnode link from the consumer device to the supplier endpoint. This is a tiny bit inefficient (not buggy) when trying to create device links or detecting cycles. So, improve this the same way we improved finding the consumer of a remote-endpoint property. Fixes: 4a032827daa8 ("of: property: Simplify of_link_to_phandle()") Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20240207011803.2637531-3-saravanak@google.com Signed-off-by: Rob Herring <robh@kernel.org>
2024-02-09of: property: Improve finding the consumer of a remote-endpoint propertySaravana Kannan
We have a more accurate function to find the right consumer of a remote-endpoint property instead of searching for a parent with compatible string property. So, use that instead. While at it, make the code to find the consumer a bit more flexible and based on the property being parsed. Fixes: f7514a663016 ("of: property: fw_devlink: Add support for remote-endpoint") Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20240207011803.2637531-2-saravanak@google.com Signed-off-by: Rob Herring <robh@kernel.org>
2024-02-09Merge branch 'netconsole-userdata-append'David S. Miller
Matthew Wood says: ==================== netconsole: Add userdata append support Add the ability to add custom userdata to every outbound netconsole message as a collection of key/value pairs, allowing users to add metadata to every netconsole message which can be used for for tagging, filtering, and aggregating log messages. In a previous patch series the ability to prepend the uname release was added towards the goals above. This patch series builds on that idea to allow any userdata, keyed by a user provided name, to be included in netconsole messages. If CONFIG_NETCONSOLE_DYNAMIC is enabled an additional userdata directory will be presented in the netconsole configfs tree, allowing the addition of userdata entries. /sys/kernel/config/netconsole/ <target>/ enabled release dev_name local_port remote_port local_ip remote_ip local_mac remote_mac userdata/ <key>/ value <key>/ value ... v1->v2: * Updated netconsole_target docs, kdoc is now clean v2->v3: * Remove inline keyword from to_userdat* functions * Break up some lines that exceeded 80 chars * Replace typos and remove {} from single line if statement * Remove unused variable Testing for this series is as follows: Build every patch without CONFIG_NETCONSOLE_DYNAMIC, and also built with CONFIG_NETCONSOLE_DYNAMIC enabled for every patch after the config option was added Test Userdata configfs # Adding userdata cd /sys/kernel/config/netconsole/ && mkdir cmdline0 && cd cmdline0 mkdir userdata/release && echo hotfix1 > userdata/release/value preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done) [[ "$preview" == $'release=hotfix1' ]] && echo pass || echo fail mkdir userdata/testing && echo something > userdata/testing/value preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done) [[ "$preview" == $'release=hotfix1\ntesting=something' ]] && echo pass || echo fail # # Removing Userdata rmdir userdata/testing preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done) [[ "$preview" == $'release=hotfix1' ]] && echo pass || echo fail rmdir userdata/release preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done) [[ "$preview" == $'' ]] && echo pass || echo fail # # Adding userdata key with too large of 6.7.0-rc8-virtme,12,481,17954104,-directory name [<54 chars] mkdir userdata/testing12345678901234567890123456789012345678901234567890 [[ $? == 1 ]] && echo pass || echo fail # # Adding userdata value with too large of value [<200 chars] mkdir userdata/testing echo `for i in {1..201};do printf "%s" "v";done` > userdata/testing/value [[ $? == 1 ]] && echo pass || echo fail rmdir userdata/testing - Output: pass pass pass pass pass mkdir: cannot create directory ‘cmdline0/userdata/testing12345678901234567890123456789012345678901234567890’: File name too long pass bash: echo: write error: Message too long pass Test netconsole messages (w/ msg fragmentation) echo `for i in {1..996};do printf "%s" "v";done` > /dev/kmsg - Output: 6.7.0-rc8-virtme,12,484,84321212,-,ncfrag=0/997;vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv6.7.0-rc8-virtme,12,484,84321212,-,ncfrag=952/997;vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv Test empty userdatum cd /sys/kernel/config/netconsole/ && mkdir cmdline0 mkdir cmdline0/userdata/empty echo test > /dev/kmsg rmdir cmdline0/userdata/empty - Output: Test netconsole messages (w/o userdata fragmentation) cd /sys/kernel/config/netconsole/ && mkdir cmdline0 mkdir cmdline0/userdata/release && echo hotfix1 > cmdline0/userdata/release/value mkdir cmdline0/userdata/testing && echo something > cmdline0/userdata/testing/value echo test > /dev/kmsg rmdir cmdline0/userdata/release rmdir cmdline0/userdata/testing ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-09net: netconsole: append userdata to fragmented netconsole messagesMatthew Wood
Regardless of whether the original message body or formatted userdata exceeds the MAX_PRINT_CHUNK, append userdata to the netconsole message starting with the first chunk that has available space after writing the body. Co-developed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Matthew Wood <thepacketgeek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-09net: netconsole: append userdata to netconsole messagesMatthew Wood
Append userdata to outgoing unfragmented (<1000 bytes) netconsole messages. When sending messages the userdata string is already formatted and stored in netconsole_target->userdata_complete. Always write the outgoing message to buf, so userdata can be appended in a standard fashion. This is a change from only using buf when the release needs to be prepended to the message. Co-developed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Matthew Wood <thepacketgeek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-09net: netconsole: cache userdata formatted string in netconsole_targetMatthew Wood
Store a formatted string for userdata that will be appended to netconsole messages. The string has a capacity of 4KB, as calculated by the userdatum entry length of 256 bytes and a max of 16 userdata entries. Update the stored netconsole_target->userdata_complete string with the new formatted userdata values when a userdatum is created, edited, or removed. Each userdata entry contains a trailing newline, which will be formatted as such in netconsole messages:: 6.7.0-rc8-virtme,12,500,1646292204,-;test release=foo something=bar 6.7.0-rc8-virtme,12,500,1646292204,-;another test release=foo something=bar Enforcement of MAX_USERDATA_ITEMS is done in userdatum_make_item; update_userdata will not check for this case but will skip any userdata children over the limit of MAX_USERDATA_ITEMs. If a userdata entry/dir is created but no value is provided, that entry will be skipped. This is in part because update_userdata() can't be called in userdatum_make_item() since the item will not have been added to the userdata config_group children yet. To preserve the experience of adding an empty userdata that doesn't show up in the netconsole messages, purposefully skip empty userdata items even when update_userdata() can be called. Co-developed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Matthew Wood <thepacketgeek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-09net: netconsole: add a userdata config_group member to netconsole_targetMatthew Wood
Create configfs machinery for netconsole userdata appending, which depends on CONFIG_NETCONSOLE_DYNAMIC (for configfs interface). Add a userdata config_group to netconsole_target for managing userdata entries as a tree under the netconsole configfs subsystem. Directory names created under the userdata directory become userdatum keys; the userdatum value is the content of the value file. Include the minimum-viable-changes for userdata configfs config_group. init_target_config_group() ties in the complete configfs machinery to avoid unused func/variable errors during build. Initializing the netconsole_target->group is moved to init_target_config_group, which will also init and add the userdata config_group. Each userdatum entry has a limit of 256 bytes (54 for the key/directory, 200 for the value, and 2 for '=' and '\n' characters), which is enforced by the configfs functions for updating the userdata config_group. When a new netconsole_target is created, initialize the userdata config_group and add it as a default group for netconsole_target config_group, allowing the userdata configfs sub-tree to be presented in the netconsole configfs tree under the userdata directory. Co-developed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Matthew Wood <thepacketgeek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-09net: netconsole: add docs for appending netconsole user dataMatthew Wood
Add a new User Data section to the netconsole docs to describe the appending of user data capability (for netconsole dynamic configuration) with usage and netconsole output examples. Co-developed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Matthew Wood <thepacketgeek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-09net: netconsole: move newline trimming to functionMatthew Wood
Move newline trimming logic from `dev_name_store()` to a new function (trim_newline()) for shared use in netconsole.c Signed-off-by: Matthew Wood <thepacketgeek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-09net: netconsole: move netconsole_target config_item to config_groupMatthew Wood
In order to support a nested userdata config_group in later patches, use a config_group for netconsole_target instead of a config_item. It's a no-op functionality-wise, since config_group maintains all features of a config_item via the cg_item member. Signed-off-by: Matthew Wood <thepacketgeek@gmail.com> Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-09net: netconsole: cleanup formatting lintsMatthew Wood
Address checkpatch lint suggestions in preparation for later changes Signed-off-by: Matthew Wood <thepacketgeek@gmail.com> Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-09ftrace: Fix DIRECT_CALLS to use SAVE_REGS by defaultMasami Hiramatsu (Google)
The commit 60c8971899f3 ("ftrace: Make DIRECT_CALLS work WITH_ARGS and !WITH_REGS") changed DIRECT_CALLS to use SAVE_ARGS when there are multiple ftrace_ops at the same function, but since the x86 only support to jump to direct_call from ftrace_regs_caller, when we set the function tracer on the same target function on x86, ftrace-direct does not work as below (this actually works on arm64.) At first, insmod ftrace-direct.ko to put a direct_call on 'wake_up_process()'. # insmod kernel/samples/ftrace/ftrace-direct.ko # less trace ... <idle>-0 [006] ..s1. 564.686958: my_direct_func: waking up rcu_preempt-17 <idle>-0 [007] ..s1. 564.687836: my_direct_func: waking up kcompactd0-63 <idle>-0 [006] ..s1. 564.690926: my_direct_func: waking up rcu_preempt-17 <idle>-0 [006] ..s1. 564.696872: my_direct_func: waking up rcu_preempt-17 <idle>-0 [007] ..s1. 565.191982: my_direct_func: waking up kcompactd0-63 Setup a function filter to the 'wake_up_process' too, and enable it. # cd /sys/kernel/tracing/ # echo wake_up_process > set_ftrace_filter # echo function > current_tracer # less trace ... <idle>-0 [006] ..s3. 686.180972: wake_up_process <-call_timer_fn <idle>-0 [006] ..s3. 686.186919: wake_up_process <-call_timer_fn <idle>-0 [002] ..s3. 686.264049: wake_up_process <-call_timer_fn <idle>-0 [002] d.h6. 686.515216: wake_up_process <-kick_pool <idle>-0 [002] d.h6. 686.691386: wake_up_process <-kick_pool Then, only function tracer is shown on x86. But if you enable 'kprobe on ftrace' event (which uses SAVE_REGS flag) on the same function, it is shown again. # echo 'p wake_up_process' >> dynamic_events # echo 1 > events/kprobes/p_wake_up_process_0/enable # echo > trace # less trace ... <idle>-0 [006] ..s2. 2710.345919: p_wake_up_process_0: (wake_up_process+0x4/0x20) <idle>-0 [006] ..s3. 2710.345923: wake_up_process <-call_timer_fn <idle>-0 [006] ..s1. 2710.345928: my_direct_func: waking up rcu_preempt-17 <idle>-0 [006] ..s2. 2710.349931: p_wake_up_process_0: (wake_up_process+0x4/0x20) <idle>-0 [006] ..s3. 2710.349934: wake_up_process <-call_timer_fn <idle>-0 [006] ..s1. 2710.349937: my_direct_func: waking up rcu_preempt-17 To fix this issue, use SAVE_REGS flag for multiple ftrace_ops flag of direct_call by default. Link: https://lore.kernel.org/linux-trace-kernel/170484558617.178953.1590516949390270842.stgit@devnote2 Fixes: 60c8971899f3 ("ftrace: Make DIRECT_CALLS work WITH_ARGS and !WITH_REGS") Cc: stable@vger.kernel.org Cc: Florent Revest <revest@chromium.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64] Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-02-09wifi: cfg80211: fix kernel-doc for cfg80211_chandef_primaryJohannes Berg
This was still referring to cfg80211_chandef_primary_freq(), fix it. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: b82730bf57b5 ("wifi: cfg80211/mac80211: move puncturing into chandef") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08ethtool: do not use rtnl in ethnl_default_dumpit()Eric Dumazet
for_each_netdev_dump() can be used with RCU protection, no need for rtnl if we are going to use dev_hold()/dev_put(). Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240207153514.3640952-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08Merge branch '10GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-02-06 (ixgbe) This series contains updates to ixgbe driver only. Jedrzej continues cleanup work from conversion away from ixgbe_status; s32 values are changed to int, various style issues are addressed, and some return statements refactored to address some smatch warnings. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ixgbe: Clarify the values of the returning status ixgbe: Rearrange args to fix reverse Christmas tree ixgbe: Convert ret val type from s32 to int ==================== Link: https://lore.kernel.org/r/20240206214054.1002919-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08Merge branch 'add-hw-checksum-offload-support-for-rz-g2l-gbethernet-ip'Jakub Kicinski
Biju Das says: ==================== Add HW checksum offload support for RZ/G2L GbEthernet IP This patch series aims to add HW checksum offload supported by TOE module found on the RZ/G2L Gb ethernet IP. TOE has hardware support for calculating IP header and TCP/UDP/ICMP checksum for both IPv4 and IPv6. For Rx, the 4-byte result of checksum calculation is attached to the Ethernet frames.First 2-bytes is result of IPv4 header checksum and next 2-bytes is TCP/UDP/ICMP checksum. If a frame does not have checksum error, 0x0000 is attached as checksum calculation result. For unsupported frames 0xFFFF is attached as checksum calculation result. In case of an IPv6 packet, IPv4 checksum is always set to 0xFFFF. For Tx, the result of checksum calculation is set to the checksum field of each IPv4 Header/TCP/UDP/ICMP of ethernet frames. For the unsupported frames, those fields are not changed. If a transmission frame is an UDPv4 frame and its checksum value in the UDP header field is 0x0000, TOE does not calculate checksum for UDP part of this frame as it is optional function as per standards. Add Tx/Rx checksum offload supported by TOE for IPv4 and TCP/UDP protocols. Results of iperf3 in Mbps RZ/V2L: TCP(Tx/Rx) results with checksum offload Enabled: {921,932} TCP(Tx/Rx) results with checksum offload Disabled: {867,612} UDP(Tx/Rx) results with checksum offload Enabled: {950,946} UDP(Tx/Rx) results with checksum offload Disabled: {952,920} RZ/G2L: TCP(Tx/Rx) results with checksum offload Enabled: {920,936} TCP(Tx/Rx) results with checksum offload Disabled: {871,626} UDP(Tx/Rx) results with checksum offload Enabled: {953,950} UDP(Tx/Rx) results with checksum offload Disabled: {954,920} RZ/G2LC: TCP(Tx/Rx) results with checksum offload Enabled: {927,936} TCP(Tx/Rx) results with checksum offload Disabled: {889,626} UDP(Tx/Rx) results with checksum offload Enabled: {950,946} UDP(Tx/Rx) results with checksum offload Disabled: {949,944} ==================== Link: https://lore.kernel.org/r/20240207092838.160627-1-biju.das.jz@bp.renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08ravb: Add Tx checksum offload support for GbEthBiju Das
TOE has hardware support for calculating IP header and TCP/UDP/ICMP checksum for both IPv4 and IPv6. Add Tx checksum offload supported by TOE for IPv4 and TCP/UDP. For Tx, the result of checksum calculation is set to the checksum field of each IPv4 Header/TCP/UDP/ICMP of ethernet frames. For the unsupported frames, those fields are not changed. If a transmission frame is an UDPv4 frame and its checksum value in the UDP header field is 0x0000, TOE does not calculate checksum for UDP part of this frame as it is optional function as per standards. We can test this functionality by the below commands ethtool -K eth0 tx on --> to turn on Tx checksum offload ethtool -K eth0 tx off --> to turn off Tx checksum offload Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20240207092838.160627-3-biju.das.jz@bp.renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08ravb: Add Rx checksum offload support for GbEthBiju Das
TOE has hardware support for calculating IP header and TCP/UDP/ICMP checksum for both IPv4 and IPv6. Add Rx checksum offload supported by TOE for IPv4 and TCP/UDP protocols. For Rx, the 4-byte result of checksum calculation is attached to the Ethernet frames.First 2-bytes is result of IPv4 header checksum and next 2-bytes is TCP/UDP/ICMP checksum. If a frame does not have checksum error, 0x0000 is attached as checksum calculation result. For unsupported frames 0xFFFF is attached as checksum calculation result. In case of an IPv6 packet, IPv4 checksum is always set to 0xFFFF. We can test this functionality by the below commands ethtool -K eth0 rx on --> to turn on Rx checksum offload ethtool -K eth0 rx off --> to turn off Rx checksum offload Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20240207092838.160627-2-biju.das.jz@bp.renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08netxen_nic: remove redundant assignment to variable capabilityColin Ian King
The variable capability is being assigned a value that is never read and is being re-assigned later. The assignment is redundant and can be removed. Also remove empty line before assignment to capability. Cleans up clang scan build warning: drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c:1189:2: warning: Value stored to 'capability' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240206115049.1879389-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08net-procfs: use xarray iterator to implement /proc/net/devEric Dumazet
In commit 759ab1edb56c ("net: store netdevs in an xarray") Jakub added net->dev_by_index to map ifindex to netdevices. We can get rid of the old hash table (net->dev_index_head), one patch at a time, if performance is acceptable. This patch removes unpleasant code to something more readable. As a bonus, /proc/net/dev gets netdevices sorted by their ifindex. Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240207165318.3814525-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08bnxt: convert EEE handling to use linkmode bitmapsHeiner Kallweit
Convert EEE handling to use linkmode bitmaps. This prepares for removing the legacy bitmaps from struct ethtool_keee. No functional change intended. When replacing _bnxt_fw_to_ethtool_adv_spds() with _bnxt_fw_to_linkmode(), remove the fw_pause argument because it's always passed as 0. Note: There's a discussion on whether the underlying implementation is correct, but it's independent of this mechanical conversion w/o functional change. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/9123bf18-a0d0-404e-a7c4-d6c466b4c5e8@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08qed: remove duplicated assignment to variable opaque_fidColin Ian King
Variable opaque_fid is being assigned twice with the same value in two identical statements. Remove the redundant first assignment. Cleans up clang scan build warning: drivers/net/ethernet/qlogic/qed/qed_rdma.c:1796:2: warning: Value stored to 'opaque_fid' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240205215530.1851115-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08xirc2ps_cs: remove redundant assignment to variable okay, clean up freespaceColin Ian King
The variable okay is being initialized with a value that is never read, it is being re-assigned later on. The initialization is redundant and can be removed. Also clean up assignment to variable freespace using an assignment and mask operation. Cleans up clang scan build warning: drivers/net/ethernet/xircom/xirc2ps_cs.c:1244:5: warning: Value stored to 'okay' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240205213643.1850420-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08net: dsa: tag_sja1105: remove "inline" keywordVladimir Oltean
The convention is to not use the "inline" keyword for functions in C files, but to let the compiler choose. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240206112927.4134375-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08net: dsa: remove "inline" from dsa_user_netpoll_send_skb()Vladimir Oltean
The convention is to not use "inline" functions in C files, and let the compiler decide whether to inline or not. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240206112927.4134375-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08net: dsa: b53: unexport and move b53_eee_enable_set()Vladimir Oltean
After commit f86ad77faf24 ("net: dsa: bcm_sf2: Utilize b53_{enable, disable}_port"), bcm_sf2.c no longer calls b53_eee_enable_set(), and all its callers are in b53_common.c. We also need to move it, because it is called within b53_common.c before its definition, and we want to avoid forward declarations. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240206112527.4132299-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08ptp: ocp: add Adva timecard supportSagi Maimon
Adding support for the Adva timecard. The card uses different drivers to provide access to the firmware SPI flash (Altera based). Other parts of the code are the same and could be reused. Signed-off-by: Sagi Maimon <maimon.sagi@gmail.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://lore.kernel.org/r/20240205153046.3642-1-maimon.sagi@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08selftests: net: add more missing kernel configPaolo Abeni
The reuseport_addr_any.sh is currently skipping DCCP tests and pmtu.sh is skipping all the FOU/GUE related cases: add the missing options. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/38d3ca7f909736c1aef56e6244d67c82a9bba6ff.1707326987.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08devlink: Fix command annotation documentationParav Pandit
Command example string is not read as command. Fix command annotation. Fixes: a8ce7b26a51e ("devlink: Expose port function commands to control migratable") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240206161717.466653-1-parav@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08net/sun3_82586: Avoid reading past buffer in debug outputKees Cook
Since NUM_XMIT_BUFFS is always 1, building m68k with sun3_defconfig and -Warraybounds, this build warning is visible[1]: drivers/net/ethernet/i825xx/sun3_82586.c: In function 'sun3_82586_timeout': drivers/net/ethernet/i825xx/sun3_82586.c:990:122: warning: array subscript 1 is above array bounds of 'volatile struct transmit_cmd_struct *[1]' [-Warray-bounds=] 990 | printk("%s: command-stats: %04x %04x\n",dev->name,swab16(p->xmit_cmds[0]->cmd_status),swab16(p->xmit_cmds[1]->cmd_status)); | ~~~~~~~~~~~~^~~ ... drivers/net/ethernet/i825xx/sun3_82586.c:156:46: note: while referencing 'xmit_cmds' 156 | volatile struct transmit_cmd_struct *xmit_cmds[NUM_XMIT_BUFFS]; Avoid accessing index 1 since it doesn't exist. Link: https://github.com/KSPP/linux/issues/325 [1] Cc: Sam Creasey <sammy@sammy.net> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20240206161651.work.876-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08bonding: do not report NETDEV_XDP_ACT_XSK_ZEROCOPYMagnus Karlsson
Do not report the XDP capability NETDEV_XDP_ACT_XSK_ZEROCOPY as the bonding driver does not support XDP and AF_XDP in zero-copy mode even if the real NIC drivers do. Note that the driver used to report everything as supported before a device was bonded. Instead of just masking out the zero-copy support from this, have the driver report that no XDP feature is supported until a real device is bonded. This seems to be more truthful as it is the real drivers that decide what XDP features are supported. Fixes: cb9e6e584d58 ("bonding: add xdp_features support") Reported-by: Prashant Batra <prbatra.mail@gmail.com> Link: https://lore.kernel.org/all/CAJ8uoz2ieZCopgqTvQ9ZY6xQgTbujmC6XkMTamhp68O-h_-rLg@mail.gmail.com/T/ Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20240207084737.20890-1-magnus.karlsson@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08net/handshake: Fix handshake_req_destroy_test1Chuck Lever
Recently, handshake_req_destroy_test1 started failing: Expected handshake_req_destroy_test == req, but handshake_req_destroy_test == 0000000000000000 req == 0000000060f99b40 not ok 11 req_destroy works This is because "sock_release(sock)" was replaced with "fput(filp)" to address a memory leak. Note that sock_release() is synchronous but fput() usually delays the final close and clean-up. The delay is not consequential in the other cases that were changed but handshake_req_destroy_test1 is testing that handshake_req_cancel() followed by closing the file actually does call the ->hp_destroy method. Thus the PTR_EQ test at the end has to be sure that the final close is complete before it checks the pointer. We cannot use a completion here because if ->hp_destroy is never called (ie, there is an API bug) then the test will hang. Reported by: Guenter Roeck <linux@roeck-us.net> Closes: https://lore.kernel.org/netdev/ZcKDd1to4MPANCrn@tissot.1015granger.net/T/#mac5c6299f86799f1c71776f3a07f9c566c7c3c40 Fixes: 4a0f07d71b04 ("net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/170724699027.91401.7839730697326806733.stgit@oracle-102.nfsv4bat.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08net/mlx5: DPLL, Fix possible use after free after delayed work timer triggersJiri Pirko
I managed to hit following use after free warning recently: [ 2169.711665] ================================================================== [ 2169.714009] BUG: KASAN: slab-use-after-free in __run_timers.part.0+0x179/0x4c0 [ 2169.716293] Write of size 8 at addr ffff88812b326a70 by task swapper/4/0 [ 2169.719022] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 6.8.0-rc2jiri+ #2 [ 2169.720974] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 2169.722457] Call Trace: [ 2169.722756] <IRQ> [ 2169.723024] dump_stack_lvl+0x58/0xb0 [ 2169.723417] print_report+0xc5/0x630 [ 2169.723807] ? __virt_addr_valid+0x126/0x2b0 [ 2169.724268] kasan_report+0xbe/0xf0 [ 2169.724667] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725116] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725570] __run_timers.part.0+0x179/0x4c0 [ 2169.726003] ? call_timer_fn+0x320/0x320 [ 2169.726404] ? lock_downgrade+0x3a0/0x3a0 [ 2169.726820] ? kvm_clock_get_cycles+0x14/0x20 [ 2169.727257] ? ktime_get+0x92/0x150 [ 2169.727630] ? lapic_next_deadline+0x35/0x60 [ 2169.728069] run_timer_softirq+0x40/0x80 [ 2169.728475] __do_softirq+0x1a1/0x509 [ 2169.728866] irq_exit_rcu+0x95/0xc0 [ 2169.729241] sysvec_apic_timer_interrupt+0x6b/0x80 [ 2169.729718] </IRQ> [ 2169.729993] <TASK> [ 2169.730259] asm_sysvec_apic_timer_interrupt+0x16/0x20 [ 2169.730755] RIP: 0010:default_idle+0x13/0x20 [ 2169.731190] Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 9a 7f 1f 02 85 c0 7e 07 0f 00 2d cf 69 43 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 c0 93 04 00 [ 2169.732759] RSP: 0018:ffff888100dbfe10 EFLAGS: 00000242 [ 2169.733264] RAX: 0000000000000001 RBX: ffff888100d9c200 RCX: ffffffff8241bd62 [ 2169.733925] RDX: ffffed109a848b15 RSI: 0000000000000004 RDI: ffffffff8127ac55 [ 2169.734566] RBP: 0000000000000004 R08: 0000000000000000 R09: ffffed109a848b14 [ 2169.735200] R10: ffff8884d42458a3 R11: 000000000000ba7e R12: ffffffff83d7d3a0 [ 2169.735835] R13: 1ffff110201b7fc6 R14: 0000000000000000 R15: ffff888100d9c200 [ 2169.736478] ? ct_kernel_exit.constprop.0+0xa2/0xc0 [ 2169.736954] ? do_idle+0x285/0x290 [ 2169.737323] default_idle_call+0x63/0x90 [ 2169.737730] do_idle+0x285/0x290 [ 2169.738089] ? arch_cpu_idle_exit+0x30/0x30 [ 2169.738511] ? mark_held_locks+0x1a/0x80 [ 2169.738917] ? lockdep_hardirqs_on_prepare+0x12e/0x200 [ 2169.739417] cpu_startup_entry+0x30/0x40 [ 2169.739825] start_secondary+0x19a/0x1c0 [ 2169.740229] ? set_cpu_sibling_map+0xbd0/0xbd0 [ 2169.740673] secondary_startup_64_no_verify+0x15d/0x16b [ 2169.741179] </TASK> [ 2169.741686] Allocated by task 1098: [ 2169.742058] kasan_save_stack+0x1c/0x40 [ 2169.742456] kasan_save_track+0x10/0x30 [ 2169.742852] __kasan_kmalloc+0x83/0x90 [ 2169.743246] mlx5_dpll_probe+0xf5/0x3c0 [mlx5_dpll] [ 2169.743730] auxiliary_bus_probe+0x62/0xb0 [ 2169.744148] really_probe+0x127/0x590 [ 2169.744534] __driver_probe_device+0xd2/0x200 [ 2169.744973] device_driver_attach+0x6b/0xf0 [ 2169.745402] bind_store+0x90/0xe0 [ 2169.745761] kernfs_fop_write_iter+0x1df/0x2a0 [ 2169.746210] vfs_write+0x41f/0x790 [ 2169.746579] ksys_write+0xc7/0x160 [ 2169.746947] do_syscall_64+0x6f/0x140 [ 2169.747333] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 2169.748049] Freed by task 1220: [ 2169.748393] kasan_save_stack+0x1c/0x40 [ 2169.748789] kasan_save_track+0x10/0x30 [ 2169.749188] kasan_save_free_info+0x3b/0x50 [ 2169.749621] poison_slab_object+0x106/0x180 [ 2169.750044] __kasan_slab_free+0x14/0x50 [ 2169.750451] kfree+0x118/0x330 [ 2169.750792] mlx5_dpll_remove+0xf5/0x110 [mlx5_dpll] [ 2169.751271] auxiliary_bus_remove+0x2e/0x40 [ 2169.751694] device_release_driver_internal+0x24b/0x2e0 [ 2169.752191] unbind_store+0xa6/0xb0 [ 2169.752563] kernfs_fop_write_iter+0x1df/0x2a0 [ 2169.753004] vfs_write+0x41f/0x790 [ 2169.753381] ksys_write+0xc7/0x160 [ 2169.753750] do_syscall_64+0x6f/0x140 [ 2169.754132] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 2169.754847] Last potentially related work creation: [ 2169.755315] kasan_save_stack+0x1c/0x40 [ 2169.755709] __kasan_record_aux_stack+0x9b/0xf0 [ 2169.756165] __queue_work+0x382/0x8f0 [ 2169.756552] call_timer_fn+0x126/0x320 [ 2169.756941] __run_timers.part.0+0x2ea/0x4c0 [ 2169.757376] run_timer_softirq+0x40/0x80 [ 2169.757782] __do_softirq+0x1a1/0x509 [ 2169.758387] Second to last potentially related work creation: [ 2169.758924] kasan_save_stack+0x1c/0x40 [ 2169.759322] __kasan_record_aux_stack+0x9b/0xf0 [ 2169.759773] __queue_work+0x382/0x8f0 [ 2169.760156] call_timer_fn+0x126/0x320 [ 2169.760550] __run_timers.part.0+0x2ea/0x4c0 [ 2169.760978] run_timer_softirq+0x40/0x80 [ 2169.761381] __do_softirq+0x1a1/0x509 [ 2169.761998] The buggy address belongs to the object at ffff88812b326a00 which belongs to the cache kmalloc-256 of size 256 [ 2169.763061] The buggy address is located 112 bytes inside of freed 256-byte region [ffff88812b326a00, ffff88812b326b00) [ 2169.764346] The buggy address belongs to the physical page: [ 2169.764866] page:000000000f2b1e89 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12b324 [ 2169.765731] head:000000000f2b1e89 order:2 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 2169.766484] anon flags: 0x200000000000840(slab|head|node=0|zone=2) [ 2169.767048] page_type: 0xffffffff() [ 2169.767422] raw: 0200000000000840 ffff888100042b40 0000000000000000 dead000000000001 [ 2169.768183] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ 2169.768899] page dumped because: kasan: bad access detected [ 2169.769649] Memory state around the buggy address: [ 2169.770116] ffff88812b326900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.770805] ffff88812b326980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.771485] >ffff88812b326a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2169.772173] ^ [ 2169.772787] ffff88812b326a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2169.773477] ffff88812b326b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.774160] ================================================================== [ 2169.774845] ================================================================== I didn't manage to reproduce it. Though the issue seems to be obvious. There is a chance that the mlx5_dpll_remove() calls cancel_delayed_work() when the work runs and manages to re-arm itself. In that case, after delay timer triggers next attempt to queue it, it works with freed memory. Fix this by using cancel_delayed_work_sync() instead which makes sure that work is done when it returns. Fixes: 496fd0a26bbf ("mlx5: Implement SyncE support using DPLL infrastructure") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240206164328.360313-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08dpll: fix possible deadlock during netlink dump operationJiri Pirko
Recently, I've been hitting following deadlock warning during dpll pin dump: [52804.637962] ====================================================== [52804.638536] WARNING: possible circular locking dependency detected [52804.639111] 6.8.0-rc2jiri+ #1 Not tainted [52804.639529] ------------------------------------------------------ [52804.640104] python3/2984 is trying to acquire lock: [52804.640581] ffff88810e642678 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}, at: netlink_dump+0xb3/0x780 [52804.641417] but task is already holding lock: [52804.642010] ffffffff83bde4c8 (dpll_lock){+.+.}-{3:3}, at: dpll_lock_dumpit+0x13/0x20 [52804.642747] which lock already depends on the new lock. [52804.643551] the existing dependency chain (in reverse order) is: [52804.644259] -> #1 (dpll_lock){+.+.}-{3:3}: [52804.644836] lock_acquire+0x174/0x3e0 [52804.645271] __mutex_lock+0x119/0x1150 [52804.645723] dpll_lock_dumpit+0x13/0x20 [52804.646169] genl_start+0x266/0x320 [52804.646578] __netlink_dump_start+0x321/0x450 [52804.647056] genl_family_rcv_msg_dumpit+0x155/0x1e0 [52804.647575] genl_rcv_msg+0x1ed/0x3b0 [52804.648001] netlink_rcv_skb+0xdc/0x210 [52804.648440] genl_rcv+0x24/0x40 [52804.648831] netlink_unicast+0x2f1/0x490 [52804.649290] netlink_sendmsg+0x36d/0x660 [52804.649742] __sock_sendmsg+0x73/0xc0 [52804.650165] __sys_sendto+0x184/0x210 [52804.650597] __x64_sys_sendto+0x72/0x80 [52804.651045] do_syscall_64+0x6f/0x140 [52804.651474] entry_SYSCALL_64_after_hwframe+0x46/0x4e [52804.652001] -> #0 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}: [52804.652650] check_prev_add+0x1ae/0x1280 [52804.653107] __lock_acquire+0x1ed3/0x29a0 [52804.653559] lock_acquire+0x174/0x3e0 [52804.653984] __mutex_lock+0x119/0x1150 [52804.654423] netlink_dump+0xb3/0x780 [52804.654845] __netlink_dump_start+0x389/0x450 [52804.655321] genl_family_rcv_msg_dumpit+0x155/0x1e0 [52804.655842] genl_rcv_msg+0x1ed/0x3b0 [52804.656272] netlink_rcv_skb+0xdc/0x210 [52804.656721] genl_rcv+0x24/0x40 [52804.657119] netlink_unicast+0x2f1/0x490 [52804.657570] netlink_sendmsg+0x36d/0x660 [52804.658022] __sock_sendmsg+0x73/0xc0 [52804.658450] __sys_sendto+0x184/0x210 [52804.658877] __x64_sys_sendto+0x72/0x80 [52804.659322] do_syscall_64+0x6f/0x140 [52804.659752] entry_SYSCALL_64_after_hwframe+0x46/0x4e [52804.660281] other info that might help us debug this: [52804.661077] Possible unsafe locking scenario: [52804.661671] CPU0 CPU1 [52804.662129] ---- ---- [52804.662577] lock(dpll_lock); [52804.662924] lock(nlk_cb_mutex-GENERIC); [52804.663538] lock(dpll_lock); [52804.664073] lock(nlk_cb_mutex-GENERIC); [52804.664490] The issue as follows: __netlink_dump_start() calls control->start(cb) with nlk->cb_mutex held. In control->start(cb) the dpll_lock is taken. Then nlk->cb_mutex is released and taken again in netlink_dump(), while dpll_lock still being held. That leads to ABBA deadlock when another CPU races with the same operation. Fix this by moving dpll_lock taking into dumpit() callback which ensures correct lock taking order. Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Link: https://lore.kernel.org/r/20240207115902.371649-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-09Merge tag 'drm-msm-fixes-2024-02-07' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v6.8-rc4 DPU: - fix for kernel doc warnings and smatch warnings in dpu_encoder - fix for smatch warning in dpu_encoder - fix the bus bandwidth value for SDM670 DP: - fixes to handle unknown bpc case correctly for DP. The current code was spilling over into other bits of DP configuration register, had to be fixed to avoid the extra shifts which were causing the spill over - fix for MISC0 programming in DP driver to program the correct colorimetry value GPU: - dmabuf vmap fix - a610 UBWC corruption fix (incorrect hbb) - revert a commit that was making GPU recovery unreliable Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv+tb1+_cp7ftxcMZbbxE9810rvxeaC50eL=msQ+zkm0g@mail.gmail.com
2024-02-09Merge tag 'amd-drm-fixes-6.8-2024-02-08' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.8-2024-02-08: amdgpu: - Misc NULL/bounds check fixes - ODM pipe policy fix - Aborted suspend fixes - JPEG 4.0.5 fix - DCN 3.5 fixes - PSP fix - DP MST fix - Phantom pipe fix - VRAM vendor fix - Clang fix - SR-IOV fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240208165500.4887-1-alexander.deucher@amd.com
2024-02-09Merge tag 'drm-intel-fixes-2024-02-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Just includes gvt-fixes-2024-02-05 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZcTETgXsejwVwat6@jlahtine-mobl.ger.corp.intel.com
2024-02-09Merge tag 'drm-xe-fixes-2024-02-08' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes Driver Changes: - Fix a loop in an error path - Fix a missing dma-fence reference - Fix a retry path on userptr REMAP - Workaround for a false gcc warning - Fix missing map of the usm batch buffer in the migrate vm. - Fix a memory leak. - Fix a bad assumption of used page size - Fix hitting a BUG() due to zero pages to map. - Remove some leftover async bind queue relics Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZcS2LllawGifubsk@fedora
2024-02-09Merge tag 'drm-misc-fixes-2024-02-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes A null pointer dereference fix for v3d, a TTM pool initialization fix, several fixes for nouveau around register size, DMA buffer leaks and API consistency, a multiple fixes for ivpu around MMU setup, initialization and firmware interactions. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/4wsi2i6kgkqdu7nzp4g7hxasbswnrmc5cakgf5zzvnix53u7lr@4rmp7hwblow3
2024-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/stmicro/stmmac/common.h 38cc3c6dcc09 ("net: stmmac: protect updates of 64-bit statistics counters") fd5a6a71313e ("net: stmmac: est: Per Tx-queue error count for HLBF") c5c3e1bfc9e0 ("net: stmmac: Offload queueMaxSDU from tc-taprio") drivers/net/wireless/microchip/wilc1000/netdev.c c9013880284d ("wifi: fill in MODULE_DESCRIPTION()s for wilc1000") 328efda22af8 ("wifi: wilc1000: do not realloc workqueue everytime an interface is added") net/unix/garbage.c 11498715f266 ("af_unix: Remove io_uring code for GC.") 1279f9d9dec2 ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08Merge tag 'net-6.8-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from WiFi and netfilter. Current release - regressions: - nic: intel: fix old compiler regressions - netfilter: ipset: missing gc cancellations fixed Current release - new code bugs: - netfilter: ctnetlink: fix filtering for zone 0 Previous releases - regressions: - core: fix from address in memcpy_to_iter_csum() - netfilter: nfnetlink_queue: un-break NF_REPEAT - af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC. - devlink: avoid potential loop in devlink_rel_nested_in_notify_work() - iwlwifi: - mvm: fix a battery life regression - fix double-free bug - mac80211: fix waiting for beacons logic - nic: nfp: flower: prevent re-adding mac index for bonded port Previous releases - always broken: - rxrpc: fix generation of serial numbers to skip zero - tipc: check the bearer type before calling tipc_udp_nl_bearer_add() - tunnels: fix out of bounds access when building IPv6 PMTU error - nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER missed - nic: atlantic: fix DMA mapping for PTP hwts ring Misc: - selftests: more fixes to deal with very slow hosts" * tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits) netfilter: nft_set_pipapo: remove scratch_aligned pointer netfilter: nft_set_pipapo: add helper to release pcpu scratch area netfilter: nft_set_pipapo: store index in scratch maps netfilter: nft_set_rbtree: skip end interval element from gc netfilter: nfnetlink_queue: un-break NF_REPEAT netfilter: nf_tables: use timestamp to check for set element timeout netfilter: nft_ct: reject direction for ct id netfilter: ctnetlink: fix filtering for zone 0 s390/qeth: Fix potential loss of L3-IP@ in case of network issues netfilter: ipset: Missing gc cancellations fixed octeontx2-af: Initialize maps. net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio netfilter: nft_set_pipapo: remove static in nft_pipapo_get() netfilter: nft_compat: restrict match/target protocol to u16 netfilter: nft_compat: reject unused compat flag netfilter: nft_compat: narrow down revision to unsigned 8-bits net: intel: fix old compiler regressions MAINTAINERS: Maintainer change for rds selftests: cmsg_ipv6: repeat the exact packet ...
2024-02-08Merge tag 'pinctrl-v6.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fix from Linus Walleij: "A single fix for the AMD driver which affects developer laptops, the pinctrl/GPIO driver won't probe on some systems" * tag 'pinctrl-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: amd: Add IRQF_ONESHOT to the interrupt request
2024-02-08Merge tag 'nvme-6.8-2023-02-08' of git://git.infradead.org/nvme into block-6.8Jens Axboe
Pull NVMe fixes from Keith: "nvme fixes for Linux 6.8 - Update a potentially stale firmware attribute (Maurizio) - Fixes for the recent verbose error logging (Keith, Chaitanya) - Protection information payload size fix for passthrough (Francis)" * tag 'nvme-6.8-2023-02-08' of git://git.infradead.org/nvme: nvme: use ns->head->pi_size instead of t10_pi_tuple structure size nvme-core: fix comment to reflect right functions nvme: move passthrough logging attribute to head nvme-host: fix the updating of the firmware version
2024-02-08virtio-blk: Ensure no requests in virtqueues before deleting vqs.Yi Sun
Ensure no remaining requests in virtqueues before resetting vdev and deleting virtqueues. Otherwise these requests will never be completed. It may cause the system to become unresponsive. Function blk_mq_quiesce_queue() can ensure that requests have become in_flight status, but it cannot guarantee that requests have been processed by the device. Virtqueues should never be deleted before all requests become complete status. Function blk_mq_freeze_queue() ensure that all requests in virtqueues become complete status. And no requests can enter in virtqueues. Signed-off-by: Yi Sun <yi.sun@unisoc.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Link: https://lore.kernel.org/r/20240129085250.1550594-1-yi.sun@unisoc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-12 18:16:09 +0000