| Age | Commit message (Collapse) | Author |
|---|
|
Add a new helper to avoid code duplication between nfc_llc_exit() and
nfc_llc_unregister().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
DDPP is copied from Synopsys Data book:
DDPP: Disable Data path Parity Protection.
When it is 0x0, Data path Parity Protection is enabled.
When it is 0x1, Data path Parity Protection is disabled.
The macro name should be XGMAC_DPP_DISABLE.
Fixes: 46eba193d04f ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20240203053133.1129236-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It is not appropriate for TIPC to use "diag" as its diag module name
while the other protocols are using "$(protoname)_diag" like tcp_diag,
udp_diag and sctp_diag etc.
So this patch is to rename diag.ko to tipc_diag.ko in tipc's Makefile.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/d909edeef072da1810bd5869fdbbfe84411efdb2.1706904669.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add DRM_IVPU_JOB_STATUS_ABORTED to indicate that the job was aborted
by the driver due to e.g. TDR or user context MMU faults.
This will help UMD and tests distinguish if job was aborted by the FW
or the driver.
Signed-off-by: Grzegorz Trzebiatowski <grzegorz.trzebiatowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-8-jacek.lawrynowicz@linux.intel.com
|
|
This parameter was never used by the 40xx FW.
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-7-jacek.lawrynowicz@linux.intel.com
|
|
All recent 40xx firmware already supports D0i3 entry message and this
WA is no longer needed.
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-6-jacek.lawrynowicz@linux.intel.com
|
|
NPU does not require this delay regardless of the generation.
All generations are integrated into the SOC.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-4-jacek.lawrynowicz@linux.intel.com
|
|
Do not use kernel CIRC_SPACE and CIRC_CNT that
incorrectly return space of a queue when wrap bit was set.
Use correct implementation that compares producer, consumer and
wrap bit values.
Without this fix it was possible to lose events in case when event
queue was full.
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-3-jacek.lawrynowicz@linux.intel.com
|
|
Set AW_SNOOP_OVERRIDE bit in VPU_37/40XX_HOST_IF_TCU_PTW_OVERRIDES
to force snooping for MMU write accesses (setting event queue events).
MMU event queue buffer is the only buffer written by MMU and
mapped as write-back which break cache coherency. Force write
transactions to be snooped solving the problem.
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-2-jacek.lawrynowicz@linux.intel.com
|
|
Brett Creeley says:
====================
pds_core: Various improvements/cleanups
This series contains various improvements and cleanups for the
pds_core driver. These patches were originally part of the following
net-next series:
https://lore.kernel.org/netdev/20240126174255.17052-1-brett.creeley@amd.com/
However, some of the patches from the above series were actually fixes,
so they were pushed and accepted to net. That series can be found here:
https://lore.kernel.org/netdev/20240129234035.69802-1-brett.creeley@amd.com/
Also, the Reviewed-by tags were left in place from the original net-next
reviews as the patches didn't change.
====================
Link: https://lore.kernel.org/r/20240202195911.65338-1-brett.creeley@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The setup and teardown flows are somewhat hard to follow regarding
pdsc_core_init()/pdsc_dev_init() and their corresponding teardown
flows being in pdsc_teardown(). Improve the readability by adding
new pdsc_core_uninit()/pdsc_dev_unint() functions that mirror their
init counterparts. Also, move the notify and admin qcq allocations
into pdsc_core_init(), so they can be freed in pdsc_core_uninit().
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Running xmastree.py against the driver found some
RCT issues, so fix them.
Also, if allocating pdsc->intr_info in pdsc_dev_init()
fails the driver still tries to free pdsc->intr_info.
Fix this by just returning -ENOMEM since there's
nothing to free at this point of failure.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Unmasking the interrupt during the pdsc_adminq_isr
is a bit early and could cause unnecessary interrupts.
Instead always unmask after processing the adminq
and notifyq in pdsc_work_thread()->pdsc_process_adminq().
Also, since we are always unmasking, there's no need
for the local credits variable in pdsc_process_adminq().
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The notifyq rides on the adminq's interrupt, so there's
no need to setup and/or access the notifyq's interrupt
index or bound_intr. The driver sets the bound_intr
using qcq->intx = -1 for the notifyq, but luckily
nothing accesses that field for notifyq. Instead of
expecting that remains the case, just clean up
the notifyq's interrupt index and bound_intr fields.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for the independent control state machine per IEEE
802.1AX-2008 5.4.15 in addition to the existing implementation of the
coupled control state machine.
Introduces two new states, AD_MUX_COLLECTING and AD_MUX_DISTRIBUTING in
the LACP MUX state machine for separated handling of an initial
Collecting state before the Collecting and Distributing state. This
enables a port to be in a state where it can receive incoming packets
while not still distributing. This is useful for reducing packet loss when
a port begins distributing before its partner is able to collect.
Added new functions such as bond_set_slave_tx_disabled_flags and
bond_set_slave_rx_enabled_flags to precisely manage the port's collecting
and distributing states. Previously, there was no dedicated method to
disable TX while keeping RX enabled, which this patch addresses.
Note that the regular flow process in the kernel's bonding driver remains
unaffected by this patch. The extension requires explicit opt-in by the
user (in order to ensure no disruptions for existing setups) via netlink
support using the new bonding parameter coupled_control. The default value
for coupled_control is set to 1 so as to preserve existing behaviour.
Signed-off-by: Aahil Awatramani <aahila@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240202175858.1573852-1-aahila@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-02-02 (ice)
This series contains updates to ice driver only.
Maciej changes some queue configuration calls to existing ones which are
better suited for the purpose.
Aniruddha adds separate reporting for Rx EIPE errors as hardware may
incorrectly report errors on certain packets.
Paul removes an incorrect comment.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: remove incorrect comment
ice: Add a new counter for Rx EIPE errors
ice: make ice_vsi_cfg_txq() static
ice: make ice_vsi_cfg_rxq() static
====================
Link: https://lore.kernel.org/r/20240202175613.3470818-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Device driver structures are shared between all devices that they
match, and thus nothing should never write to the device driver
structure through the phydev->drv pointer. Let's make this pointer
const to catch code that attempts to do so.
Suggested-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rVxXt-002YqY-9G@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This change uses the appropriate _cansleep or non-sleeping API for
reading GPIO read-only state. This allows users with GPIOs that
never sleepbeing called in atomic context.
Implement the same mechanism as in commit 52af318c93e97 ("mmc: Allow
non-sleeping GPIO cd").
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240206083912.2543142-1-alexander.stein@ew.tq-group.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
by BIOS
Driver shall switch clock source from DLL clock to
OPE clock when power off card to ensure that card
can be identified with OPE clock by BIOS.
Signed-off-by: Fred Ai <fred.ai@bayhubtech.com>
Fixes:4be33cf18703 ("mmc: sdhci-pci-o2micro: Improve card input timing at SDR104/HS200 mode")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240203102908.4683-1-fredaibayhubtech@126.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Since commit 52df157f17e56 ("xfrm: take refcnt of dst when creating
struct xfrm_dst bundle") dst_destroy() returns only NULL and no caller
cares about the return value.
There are no in in-tree users of dst_destroy() outside of the file.
Make dst_destroy() static and return void.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240202163746.2489150-1-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Claudiu Beznea says:
====================
net: ravb: Prepare for suspend to RAM and runtime PM support (part 1)
This series prepares ravb driver for runtime PM support and adjust the
already existing suspend to RAM code to work for RZ/G3S (R9A08G045) SoC.
As there are IP versions that switch to module standby when disabling
the clocks, and because of module standby IP switches to reset and
the register content is lost, to be able to have runtime PM supported
for all IP variants, the configuration operations were moved all to
ravb_open()/ravb_close() letting the ravb_probe() and ravb_remove()
to deal with resource parsing and allocation/free.
The ethtool and IOCTL APIs that could have been run asyncronously
were adapted to return if the interface is down. As explained in
each individual commits description, this should be harmless.
Along with it, the series contains preparatory cleanups.
The series has been tested on the boards with the following device trees:
- r8a7742-iwg21d-q7.dts
- r8a774a1-hihope-rzg2m-ex.dts
- r9a07g043u11-smarc-rzg2ul.dts
- r9a07g054l2-smarc-rzv2l.dts
- r9a07g044l2-smarc-rzg2l.dts
Changes in v6:
- fixed typo in patch 08/15
- re-arranged the tags as my b4 am/shazam placed the Rb tags
before author's Sob tag
Changes in v5:
- collected tags
- fixed typos in patches description
- improved description for patch 07/15
- collected tags
Changes in v4:
- changed cover letter title and keep on 15 patches in series to cope
with requirement at [1]
- add dependency on RESET_CONTROLLER in patch "net: ravb: Make reset
controller support mandatory"
- use pm_runtime_active() in patch "net: ravb: Move the IRQs get and
request in the probe function"
- set config more before reading the mac address in patch "net: ravb: Set
config mode in ndo_open and reset mode in ndo_close"
- collected tags
[1] https://www.kernel.org/doc/html/v6.6/process/maintainer-netdev.html#tl-dr
Changes in v3:
- collected tags
- addressed review comments
- squashed patch 17/21 ("net: ravb: Keep clock request operations grouped
together") from v2 in patch 07/19 ("net: ravb: Move reference clock
enable/disable on runtime PM APIs") from v3
- check for ndev->flags & IFF_UP in patch 17/19 and 18/19 instead of
checking netif_running()
- dropped patch 19/21 ("net: ravb: Do not set promiscuous mode if the
interface is down") as the changes there are not necessary as
ndev->flags & IFF_UP is already checked at the beginning of
__dev_set_rx_mode()
- remove code from ravb_open() introduced by patch 20/21
("net: ravb: Do not apply RX CSUM settings to hardware if the interface
is down") from v2 as this is not necessary; driver already takes
care of this in ravb_emac_init_rcar()
Changes in v2:
- rework the driver (mainly, ravb_open() contains now only resource
allocation and parsing leaving the settings to ravb_open(); ravb_remove()
has been adapted accordingly) to be able to use runtime PM for all
IP variants; due to this number of patches increased
- adjust previous series to review comments
- collected tags
- populated driver's own runtime PM ops with enable/disable of reference
clock
====================
Link: https://lore.kernel.org/r/20240202084136.3426492-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove explicit calls to functions that are called by ravb_open(). There is
no need to have them doubled now that the ravb_open() already contains
what is needed for the interface configuration. Along with it,
configurations needed by PTP were moved to ravb_wol_restore(). With this,
code in ravb_resume() becomes simpler.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As ravb_close() contains now the call to ravb_ptp_stop() for both ccc_gac
and gPTP aware platforms, there is no need to keep the separate call in
ravb_suspend(). Instead, move it to ravb_wol_setup(). In this way the
resulting code is cleaner.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As some IP variants switch to reset mode (and thus the register contents is
lost) when setting clocks (due to module standby functionality) to be able
to implement runtime PM and save more power, set the IP's operating mode to
reset at the end of the probe. Along with it, in the ndo_open API the IP
will be switched to configuration, then operation mode. In the ndo_close
API, the IP will be switched back to reset mode. This allows implementing
runtime PM and, along with it, save more power when the IP is not used.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
platorms
The initialization sequence for PTP is the same for platforms with ccc_gac
and gptp (according to "Figure 50.71 Flow of gPTP Initialization (Normal,
Common to All Modes)" of the R-Car Series, 3rd generation hardware
manual and "Figure 37A.53 Flow of gPTP Initialization (Normal, Common to
All Modes)" of the RZ/G Series hardware manual).
As some IP variants switch to reset mode (and thus the registers content is
lost) when setting clocks (due to module standby functionality) to be able
to implement runtime PM, move the PTP initialization to the driver's
ndo_open API.
This commit prepares the code for the addition of runtime PM.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
DBAT setup was done in the driver's probe API. As some IP variants switch
to reset mode (and thus registers content is lost) when setting clocks
(due to module standby functionality) to be able to implement runtime PM
move the DBAT configuration in the driver's ndo_open API.
This commit prepares the code for the addition of runtime PM.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Delay parsing and setting were done in the driver's probe API. As some IP
variants switch to reset mode (and thus the register contents is lost) when
setting clocks (due to module standby functionality) to be able to
implement runtime PM keep the delay parsing in the driver's probe function
and move the delay applying function to the driver's ndo_open API.
Along with it, ravb_parse_delay_mode() function was moved close to
ravb_set_delay_mode() function to have the delay specific code in the
same place.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ravb_set_gti() was computing the value of GTI based on the reference clock
rate and then applied it to register. This was done on the driver's probe
function. In order to implement runtime PM for all IP variants (as some IP
variants switches to reset mode (and thus the registers content is lost)
when module standby is configured through clock APIs) the GTI setup was
split in 2 parts: one computing the value of the GTI register (done in the
driver's probe function) and one applying the computed value to register
(done in the driver's ndo_open API).
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The runtime PM implementation will disable clocks at the end of
ravb_probe(). As some IP variants switch to reset mode as a result of
setting module standby through clock disable APIs, to implement runtime PM
the resource parsing and requesting are moved in the probe function and IP
settings are moved in the open function. This is done because at the end of
the probe some IP variants will switch anyway to reset mode and the
registers content is lost. Also keeping only register settings operations
in the ravb_open()/ravb_close() functions will make them faster.
Commit moves IRQ requests to ravb_probe() to have all the IRQs ready when
the interface is open. As now getting/requesting IRQs is done in a single
place there is no need to keep intermediary data (like ravb_rx_irqs[] and
ravb_tx_irqs[] arrays or IRQs in struct ravb_private).
In order to avoid accessing the IP registers while the IP is runtime
suspended (e.g. in the timeframe b/w the probe requests shared IRQs and
IP clocks are enabled) in the interrupt handlers were introduced
pm_runtime_active() checks. The device runtime PM usage counter has been
incremented to avoid disabling the device's clocks while the check is in
progress (if any).
This is a preparatory change to add runtime PM support for all IP variants.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Reference clock could be or not be part of the power domain. If it is part
of the power domain, the power domain takes care of properly setting it. In
case it is not part of the power domain and full runtime PM support is
available in driver the clock will not be propertly disabled/enabled at
runtime. For this, keep the prepare/unprepare operations in the driver's
probe()/remove() functions and move the enable/disable in runtime PM
functions.
By doing this, the previous ravb_runtime_nop() function was renamed
ravb_runtime_suspend() and the comment was removed. A proper runtime PM
resume function was added (ravb_runtime_resume()). The current driver
still don't need to make any register settings on runtime suspend/resume
(as expressed in the removed comment) because, currently,
pm_runtime_put_sync() is called on the driver remove function. This will be
changed in the next commits (that extends the runtime PM support) such
that proper register settings (along with runtime resume/suspend) will be
done on ravb_open()/ravb_close().
Along with it, the other clock request operations were moved close to
reference clock request and prepare to have all the clock requests
specific code grouped together.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
RZ/G3S can go to deep sleep states where power to most of the SoC parts is
off. When resuming from such a state, the Ethernet controller needs to be
reinitialized. De-asserting the reset signal for it should also be done.
Thus, add reset assert/de-assert on suspend/resume functions.
On the resume function, the de-assert was not reverted in case of failures
to give the user a chance to restore the interface (e.g., bringing down/up
the interface) in case suspend/resume failed.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use tabs instead of spaces in the ravb_set_rate_gbeth() function.
This aligns with the coding style requirements.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
SET_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() are deprecated now
and require __maybe_unused protection against unused function warnings.
The usage of pm_ptr() and SYSTEM_SLEEP_PM_OPS()/RUNTIME_PM_OPS() allows
the compiler to see the functions, thus suppressing the warning. Thus
drop the __maybe_unused markings.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On the RZ/G3S SoC the reset controller is mandatory for the IP to work.
The device tree binding documentation for the ravb driver specifies that
the resets are mandatory. Based on this, make the resets mandatory also in
driver for all ravb devices.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ravb_rzv2m_hw_info::gptp_ref_clk is enabled only for RZ/V2M. RZ/V2M
is an ARM64-based device which selects power domains by default and
CONFIG_PM. The RZ/V2M Ethernet DT node has proper power-domain binding
available in device tree from the commit that added the Ethernet node.
(4872ca1f92b0 ("arm64: dts: renesas: r9a09g011: Add ethernet nodes")).
Power domain support was available in the rzg2l-cpg.c driver when the
Ethernet DT node has been enabled in RZ/V2M device tree.
(ef3c613ccd68 ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")).
Thus, remove the explicit clock enable for gptp_clk (and treat it as the
other clocks are treated) as it is not needed and removing it doesn't
break the ABI according to the above explanations.
By removing the enable/disable operation from the driver we can add
runtime PM support (which operates on clocks) w/o the need to handle
the gptp_clk in the Ethernet driver functions like ravb_runtime_nop().
PM domain does all that is needed.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ravb_poll() initial code used to interrogate the first descriptor of the
RX queue in case gPTP is false to determine if ravb_rx() should be called.
This is done for non-gPTP IPs. For gPTP IPs the driver PTP-specific
information was used to determine if receive function should be called. As
every IP has its own receive function that interrogates the RX descriptors
list in the same way the ravb_poll() was doing there is no need to double
check this in ravb_poll(). Removing the code from ravb_poll() leads to a
cleaner code.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The hrtimers migration on CPU-down hotplug process has been moved
earlier, before the CPU actually goes to die. This leaves a small window
of opportunity to queue an hrtimer in a blind spot, leaving it ignored.
For example a practical case has been reported with RCU waking up a
SCHED_FIFO task right before the CPUHP_AP_IDLE_DEAD stage, queuing that
way a sched/rt timer to the local offline CPU.
Make sure such situations never go unnoticed and warn when that happens.
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240129235646.3171983-4-boqun.feng@gmail.com
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20240202064336.39138-1-liubo03@inspur.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Selftests here check not only that connect()/accept() for
TCP-AO/TCP-MD5/non-signed-TCP combinations do/don't establish
connections, but also counters: those are per-AO-key, per-socket and
per-netns.
The counters are checked on the server's side, as the server listener
has TCP-AO/TCP-MD5/no keys for different peers. All tests run in
the same namespaces with the same veth pair, created in test_init().
After close() in both client and server, the sides go through
the regular FIN/ACK + FIN/ACK sequence, which goes in the background.
If the selftest has already started a new testing scenario, read
per-netns counters - it may fail in the end iff it doesn't expect
the TCPAOGood per-netns counters go up during the test.
Let's just kill both TCP-AO sides - that will avoid any asynchronous
background TCP-AO segments going to either sides.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20240201132153.4d68f45e@kernel.org/T/#u
Fixes: 6f0c472a6815 ("selftests/net: Add TCP-AO + TCP-MD5 + no sign listen socket tests")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20240202-unsigned-md5-netns-counters-v1-1-8b90c37c0566@arista.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This test is time sensitive. It may fail on virtual machines and for
debug builds.
Continue to run in these environments to get code coverage. But
optionally suppress failure for timing errors (only). This is
controlled with environment variable KSFT_MACHINE_SLOW.
The test continues to return 0 (KSFT_PASS), rather than KSFT_XFAIL
as previously discussed. Because making so_txtime.c return that and
then making so_txtime.sh capture runs that pass that vs KSFT_FAIL
and pass it on added a bunch of (fragile bash) boilerplate, while the
result is interpreted the same as KSFT_PASS anyway.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240201162130.2278240-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After commit a9ef277488cf ("x86/kvm: Fix SEV check in
sev_map_percpu_data()"), there is a build error when building
x86_64_defconfig with GCOV using LLVM:
ld.lld: error: undefined symbol: cc_vendor
>>> referenced by kvm.c
>>> arch/x86/kernel/kvm.o:(kvm_smp_prepare_boot_cpu) in archive vmlinux.a
which corresponds to
if (cc_vendor != CC_VENDOR_AMD ||
!cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT))
return;
Without GCOV, clang is able to eliminate the use of cc_vendor because
cc_platform_has() evaluates to false when CONFIG_ARCH_HAS_CC_PLATFORM is
not set, meaning that if statement will be true no matter what value
cc_vendor has.
With GCOV, the instrumentation keeps the use of cc_vendor around for
code coverage purposes but cc_vendor is only declared, not defined,
without CONFIG_ARCH_HAS_CC_PLATFORM, leading to the build error above.
Provide a macro definition of cc_vendor when CONFIG_ARCH_HAS_CC_PLATFORM
is not set with a value of CC_VENDOR_NONE, so that the first condition
can always be evaluated/eliminated at compile time, avoiding the build
error altogether. This is very similar to the situation prior to
commit da86eb961184 ("x86/coco: Get rid of accessor functions").
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Message-Id: <20240202-provide-cc_vendor-without-arch_has_cc_platform-v1-1-09ad5f2a3099@kernel.org>
Fixes: a9ef277488cf ("x86/kvm: Fix SEV check in sev_map_percpu_data()", 2024-01-31)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
syzbot reported the following general protection fault [1]:
general protection fault, probably for non-canonical address 0xdffffc0000000010: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000080-0x0000000000000087]
...
RIP: 0010:tipc_udp_is_known_peer+0x9c/0x250 net/tipc/udp_media.c:291
...
Call Trace:
<TASK>
tipc_udp_nl_bearer_add+0x212/0x2f0 net/tipc/udp_media.c:646
tipc_nl_bearer_add+0x21e/0x360 net/tipc/bearer.c:1089
genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972
genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline]
genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2544
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1367
netlink_sendmsg+0x8b7/0xd70 net/netlink/af_netlink.c:1909
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
__sys_sendmsg+0x117/0x1e0 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
The cause of this issue is that when tipc_nl_bearer_add() is called with
the TIPC_NLA_BEARER_UDP_OPTS attribute, tipc_udp_nl_bearer_add() is called
even if the bearer is not UDP.
tipc_udp_is_known_peer() called by tipc_udp_nl_bearer_add() assumes that
the media_ptr field of the tipc_bearer has an udp_bearer type object, so
the function goes crazy for non-UDP bearers.
This patch fixes the issue by checking the bearer type before calling
tipc_udp_nl_bearer_add() in tipc_nl_bearer_add().
Fixes: ef20cd4dd163 ("tipc: introduce UDP replicast")
Reported-and-tested-by: syzbot+5142b87a9abc510e14fa@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5142b87a9abc510e14fa [1]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20240131152310.4089541-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull bcachefs fixes from Kent Overstreet:
"Two serious ones here that we'll want to backport to stable: a fix for
a race in the thread_with_file code, and another locking fixup in the
subvolume deletion path"
* tag 'bcachefs-2024-02-05' of https://evilpiepirate.org/git/bcachefs:
bcachefs: time_stats: Check for last_event == 0 when updating freq stats
bcachefs: install fd later to avoid race with close
bcachefs: unlock parent dir if entry is not found in subvolume deletion
bcachefs: Fix build on parisc by avoiding __multi3()
|
|
The vDSO executes in userspace, so the kernel's UBSAN should not
instrument it. Solves these kind of build errors:
loongarch64-linux-ld: arch/loongarch/vdso/vgettimeofday.o: in function `vdso_shift_ns':
lib/vdso/gettimeofday.c:23:(.text+0x3f8): undefined reference to `__ubsan_handle_shift_out_of_bounds'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401310530.lZHCj1Zl-lkp@intel.com/
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Fangrui Song <maskray@google.com>
Cc: loongarch@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The earlycon parameter is based on fixmap, and fixmap addresses are not
supposed to be shadowed by KASAN. So return the kasan_early_shadow_page
in kasan_mem_to_shadow() if the input address is above FIXADDR_START.
Otherwise earlycon cannot work after kasan_init().
Cc: stable@vger.kernel.org
Fixes: 5aa4ac64e6add3e ("LoongArch: Add KASAN (Kernel Address Sanitizer) support")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
With default config, the value of NR_CPUS is 64. When HW platform has
more then 64 cpus, system will crash on these platforms. MAX_CORE_PIC
is the maximum cpu number in MADT table (max physical number) which can
exceed the supported maximum cpu number (NR_CPUS, max logical number),
but kernel should not crash. Kernel should boot cpus with NR_CPUS, let
the remainder cpus stay in BIOS.
The potential crash reason is that the array acpi_core_pic[NR_CPUS] can
be overflowed when parsing MADT table, and it is obvious that CORE_PIC
should be corresponding to physical core rather than logical core, so it
is better to define the array as acpi_core_pic[MAX_CORE_PIC].
With the patch, system can boot up 64 vcpus with qemu parameter -smp 128,
otherwise system will crash with the following message.
[ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000420000004259, era == 90000000037a5f0c, ra == 90000000037a46ec
[ 0.000000] Oops[#1]:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.8.0-rc2+ #192
[ 0.000000] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
[ 0.000000] pc 90000000037a5f0c ra 90000000037a46ec tp 9000000003c90000 sp 9000000003c93d60
[ 0.000000] a0 0000000000000019 a1 9000000003d93bc0 a2 0000000000000000 a3 9000000003c93bd8
[ 0.000000] a4 9000000003c93a74 a5 9000000083c93a67 a6 9000000003c938f0 a7 0000000000000005
[ 0.000000] t0 0000420000004201 t1 0000000000000000 t2 0000000000000001 t3 0000000000000001
[ 0.000000] t4 0000000000000003 t5 0000000000000000 t6 0000000000000030 t7 0000000000000063
[ 0.000000] t8 0000000000000014 u0 ffffffffffffffff s9 0000000000000000 s0 9000000003caee98
[ 0.000000] s1 90000000041b0480 s2 9000000003c93da0 s3 9000000003c93d98 s4 9000000003c93d90
[ 0.000000] s5 9000000003caa000 s6 000000000a7fd000 s7 000000000f556b60 s8 000000000e0a4330
[ 0.000000] ra: 90000000037a46ec platform_init+0x214/0x250
[ 0.000000] ERA: 90000000037a5f0c efi_runtime_init+0x30/0x94
[ 0.000000] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[ 0.000000] PRMD: 00000000 (PPLV0 -PIE -PWE)
[ 0.000000] EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
[ 0.000000] ECFG: 00070800 (LIE=11 VS=7)
[ 0.000000] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
[ 0.000000] BADV: 0000420000004259
[ 0.000000] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
[ 0.000000] Modules linked in:
[ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____))
[ 0.000000] Stack : 9000000003c93a14 9000000003800898 90000000041844f8 90000000037a46ec
[ 0.000000] 000000000a7fd000 0000000008290000 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 0000000000000000 00000000019d8000 000000000f556b60
[ 0.000000] 000000000a7fd000 000000000f556b08 9000000003ca7700 9000000003800000
[ 0.000000] 9000000003c93e50 9000000003800898 9000000003800108 90000000037a484c
[ 0.000000] 000000000e0a4330 000000000f556b60 000000000a7fd000 000000000f556b08
[ 0.000000] 9000000003ca7700 9000000004184000 0000000000200000 000000000e02b018
[ 0.000000] 000000000a7fd000 90000000037a0790 9000000003800108 0000000000000000
[ 0.000000] 0000000000000000 000000000e0a4330 000000000f556b60 000000000a7fd000
[ 0.000000] 000000000f556b08 000000000eaae298 000000000eaa5040 0000000000200000
[ 0.000000] ...
[ 0.000000] Call Trace:
[ 0.000000] [<90000000037a5f0c>] efi_runtime_init+0x30/0x94
[ 0.000000] [<90000000037a46ec>] platform_init+0x214/0x250
[ 0.000000] [<90000000037a484c>] setup_arch+0x124/0x45c
[ 0.000000] [<90000000037a0790>] start_kernel+0x90/0x670
[ 0.000000] [<900000000378b0d8>] kernel_entry+0xd8/0xdc
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch missed the refactoring made by commit 282a181b1a0d ("seccomp:
Move config option SECCOMP to arch/Kconfig") because LoongArch was not
mainlined at that time.
The 'depends on PROC_FS' statement is stale as described in that commit.
Select HAVE_ARCH_SECCOMP, and remove the duplicated config entry.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
ARCH_ENABLE_THP_MIGRATION is supposed to be selected by arch Kconfig.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Rather then loop over entities until one with a ready job is found,
re-queue the run job worker when drm_sched_entity_pop_job() returns NULL.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 66dbd9004a55 ("drm/sched: Drain all entities in DRM sched run job worker")
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240130030413.2031009-1-matthew.brost@intel.com
|
|
In the case of XDP Multi-Buffer with Striding RQ, an extra
page is allocated for the linear part of non-linear SKBs.
Including headroom and tailroom in the calculation may
result in an unnecessary increase in the amount of memory
allocated. This could be critical, particularly for large
MTUs (e.g. 7975B) and large RQ sizes (e.g. 8192).
In this case, the requested page pool size is 64K, but
32K would be sufficient. This causes a failure due to
exceeding the page pool size limit of 32K.
Exclude headroom and tailroom from SKB size calculations
to reduce page pool size.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
