summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-06-13Revert "drm/prime: remove drm_prime_lookup_buf_by_handle"Christian König
This reverts commit c2aa5603af309968a10f8e0d929ec7662ada5f78. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Simona Vetter <simona.vetter@ffwll.ch> Link: https://lore.kernel.org/r/aEwls5hPP9p-DPtt@phenom.ffwll.local
2025-06-13drm/format-helper: Update tests after BT.601 changesThomas Zimmermann
Commit a979a54165c2 ("drm/format-helper: Normalize BT.601 factors to 256") improved rounding precision of the BT.601 calculation, which impacts the results of soem of the format-helper tests. Adapt the test to the new results. v2: - fix spelling in commit description Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a979a54165c2 ("drm/format-helper: Normalize BT.601 factors to 256") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20250613111711.136993-1-tzimmermann@suse.de
2025-06-13block: Fix bvec_set_folio() for very large foliosMatthew Wilcox (Oracle)
Similarly to 26064d3e2b4d ("block: fix adding folio to bio"), if we attempt to add a folio that is larger than 4GB, we'll silently truncate the offset and len. Widen the parameters to size_t, assert that the length is less than 4GB and set the first page that contains the interesting data rather than the first page of the folio. Fixes: 26db5ee15851 (block: add a bvec_set_folio helper) Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lore.kernel.org/r/20250612144255.2850278-1-willy@infradead.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-13bio: Fix bio_first_folio() for SPARSEMEM without VMEMMAPMatthew Wilcox (Oracle)
It is possible for physically contiguous folios to have discontiguous struct pages if SPARSEMEM is enabled and SPARSEMEM_VMEMMAP is not. This is correctly handled by folio_page_idx(), so remove this open-coded implementation. Fixes: 640d1930bef4 (block: Add bio_for_each_folio_all()) Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lore.kernel.org/r/20250612144126.2849931-1-willy@infradead.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-13spi: spi-pci1xxxx: Drop MSI-X usage as unsupported by DMA engineThangaraj Samynathan
Removes MSI-X from the interrupt request path, as the DMA engine used by the SPI controller does not support MSI-X interrupts. Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com> Link: https://patch.msgid.link/20250612023059.71726-1-thangaraj.s@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-13drm/xe: Make dma-fences compliant with the safe access rulesTvrtko Ursulin
Xe can free some of the data pointed to by the dma-fences it exports. Most notably the timeline name can get freed if userspace closes the associated submit queue. At the same time the fence could have been exported to a third party (for example a sync_fence fd) which will then cause an use- after-free on subsequent access. To make this safe we need to make the driver compliant with the newly documented dma-fence rules. Driver has to ensure a RCU grace period between signalling a fence and freeing any data pointed to by said fence. For the timeline name we simply make the queue be freed via kfree_rcu and for the shared lock associated with multiple queues we add a RCU grace period before freeing the per GT structure holding the lock. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Link: https://lore.kernel.org/r/20250610164226.10817-5-tvrtko.ursulin@igalia.com
2025-06-13dma-fence: Add safe access helpers and document the rulesTvrtko Ursulin
Dma-fence objects currently suffer from a potential use after free problem where fences exported to userspace and other drivers can outlive the exporting driver, or the associated data structures. The discussion on how to address this concluded that adding reference counting to all the involved objects is not desirable, since it would need to be very wide reaching and could cause unloadable drivers if another entity would be holding onto a signaled fence reference potentially indefinitely. This patch enables the safe access by introducing and documenting a contract between fence exporters and users. It documents a set of contraints and adds helpers which a) drivers with potential to suffer from the use after free must use and b) users of the dma-fence API must use as well. Premise of the design has multiple sides: 1. Drivers (fence exporters) MUST ensure a RCU grace period between signalling a fence and freeing the driver private data associated with it. The grace period does not have to follow the signalling immediately but HAS to happen before data is freed. 2. Users of the dma-fence API marked with such requirement MUST contain the complete access to the data within a single code block guarded by rcu_read_lock() and rcu_read_unlock(). The combination of the two ensures that whoever sees the DMA_FENCE_FLAG_SIGNALED_BIT not set is guaranteed to have access to a valid fence->lock and valid data potentially accessed by the fence->ops virtual functions, until the call to rcu_read_unlock(). 3. Module unload (fence->ops) disappearing is for now explicitly not handled. That would required a more complex protection, possibly needing SRCU instead of RCU to handle callers such as dma_fence_release() and dma_fence_wait_timeout(), where race between dma_fence_enable_sw_signaling, signalling, and dereference of fence->ops->wait() would need a sleeping SRCU context. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Link: https://lore.kernel.org/r/20250610164226.10817-4-tvrtko.ursulin@igalia.com
2025-06-13drm/i915: Protect access to driver and timeline nameTvrtko Ursulin
Protect the access to driver and timeline name which otherwise could be freed as dma-fence exported is signalling fences. This prepares the code for incoming dma-fence API changes which will start asserting these accesses are done from a RCU locked section. Now that the safe access is handled in the dma-fence API, the external callers such as sync_file, and our internal code paths, we can drop the similar protection from i915_fence_get_timeline_name(). This prepares the code for incoming dma-fence API changes which will start asserting these accesses are done from a RCU locked section. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> # v1 Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Link: https://lore.kernel.org/r/20250610164226.10817-3-tvrtko.ursulin@igalia.com
2025-06-13sync_file: Protect access to driver and timeline nameTvrtko Ursulin
Protect the access to driver and timeline name which otherwise could be freed as dma-fence exported is signalling fences. This prepares the code for incoming dma-fence API changes which will start asserting these accesses are done from a RCU locked section. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Link: https://lore.kernel.org/r/20250610164226.10817-2-tvrtko.ursulin@igalia.com
2025-06-13drm/xe/vm: Add a helper xe_vm_range_tilemask_tlb_invalidation()Himal Prasad Ghimiray
Introduce xe_vm_range_tilemask_tlb_invalidation(), which issues a TLB invalidation for a specified address range across GTs indicated by a tilemask. v2 (Matthew Brost) - Move WARN_ON_ONCE to svm caller - Remove xe_gt_tlb_invalidation_vma - s/XE_WARN_ON/WARN_ON_ONCE v3 - Rebase Suggested-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250609041616.1723636-1-himal.prasad.ghimiray@intel.com Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
2025-06-13drm/format-helper: Normalize BT.601 factors to 256Thomas Zimmermann
BT.601 weights RGB components by certain factors to convert the color to grayscale. Normalize the constants to 256 instead of 10. Allows for slightly more precise rounding. The division by 256 can be compiled as an 8-bit shift, which might be faster on some hardware. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20250603161158.423962-1-tzimmermann@suse.de
2025-06-12drm/xe/bmg: Update Wa_14022085890Vinay Belgaumkar
Set GT min frequency to 1200Mhz once driver load is complete. v2: Review comments (Rodrigo) v3: Apply Wa earlier so user_req_min is not clobbered. v4: Apply to all GTs (Lucas) Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Link: https://lore.kernel.org/r/20250612-wa-14022085890-v4-3-94ba5dcc1e30@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-06-12drm/xe/bmg: Update Wa_16023588340Vinay Belgaumkar
This allows for additional L2 caching modes. Fixes: 01570b446939 ("drm/xe/bmg: implement Wa_16023588340") Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Link: https://lore.kernel.org/r/20250612-wa-14022085890-v4-2-94ba5dcc1e30@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-06-12drm/xe/guc: Ignore GuC CT errors when wedgedVinay Belgaumkar
Messaging to GuC may get canceled when device is wedged. Don't flag this as an error in xe_guc_pc code. Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Link: https://lore.kernel.org/r/20250612-wa-14022085890-v4-1-94ba5dcc1e30@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-06-13Merge tag 'drm-misc-fixes-2025-06-12' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes drm-misc-fixes for v6.16-rc2: - Fix infinite EPROBE_DEFER loop in vc4 probing. - Fix amdxdna firmware size. - mode fixes for meson. - Kconfig fix for st7171-i2c. - Fix -EBUSY WARN_ON_ONCE in dma-buf - Use dma_sync_sgtable_for_cpu in udmabuf. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://lore.kernel.org/r/62c06195-8bc1-4dae-8777-e86d94e4d9d9@linux.intel.com
2025-06-12mm: add mmap_prepare() compatibility layer for nested file systemsLorenzo Stoakes
Nested file systems, that is those which invoke call_mmap() within their own f_op->mmap() handlers, may encounter underlying file systems which provide the f_op->mmap_prepare() hook introduced by commit c84bf6dd2b83 ("mm: introduce new .mmap_prepare() file callback"). We have a chicken-and-egg scenario here - until all file systems are converted to using .mmap_prepare(), we cannot convert these nested handlers, as we can't call f_op->mmap from an .mmap_prepare() hook. So we have to do it the other way round - invoke the .mmap_prepare() hook from an .mmap() one. in order to do so, we need to convert VMA state into a struct vm_area_desc descriptor, invoking the underlying file system's f_op->mmap_prepare() callback passing a pointer to this, and then setting VMA state accordingly and safely. This patch achieves this via the compat_vma_mmap_prepare() function, which we invoke from call_mmap() if f_op->mmap_prepare() is specified in the passed in file pointer. We place the fundamental logic into mm/vma.h where VMA manipulation belongs. We also update the VMA userland tests to accommodate the changes. The compat_vma_mmap_prepare() function and its associated machinery is temporary, and will be removed once the conversion of file systems is complete. We carefully place this code so it can be used with CONFIG_MMU and also with cutting edge nommu silicon. [akpm@linux-foundation.org: export compat_vma_mmap_prepare tp fix build] [lorenzo.stoakes@oracle.com: remove unused declarations] Link: https://lkml.kernel.org/r/ac3ae324-4c65-432a-8c6d-2af988b18ac8@lucifer.local Link: https://lkml.kernel.org/r/20250609165749.344976-1-lorenzo.stoakes@oracle.com Fixes: c84bf6dd2b83 ("mm: introduce new .mmap_prepare() file callback"). Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reported-by: Jann Horn <jannh@google.com> Closes: https://lore.kernel.org/linux-mm/CAG48ez04yOEVx1ekzOChARDDBZzAKwet8PEoPM4Ln3_rk91AzQ@mail.gmail.com/ Reviewed-by: Pedro Falcato <pfalcato@suse.de> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-06-13Merge tag 'drm-xe-fixes-2025-06-12' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes Driver Changes: - Fix regression disallowing 64K SVM migration (Maarten) - Use a bounce buffer for WA BB (Lucas) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://lore.kernel.org/r/aEsBQoh5Si3ouPgE@fedora
2025-06-12drm/xe: Add helper function to inject fault into ct_dead_capture()Satyanarayana K V P
When injecting fault to xe_guc_ct_send_recv() & xe_guc_mmio_send_recv() functions, the CI test systems are going out of space and crashing. To avoid this issue, a new helper function is created and when fault is injected into this xe_is_injection_active() helper function, ct dead capture is avoided which suppresses ct dumps in the log. Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com> Suggested-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://lore.kernel.org/r/20250612080402.22011-1-satyanarayana.k.v.p@intel.com
2025-06-12drm/xe: Fix early wedge on GuC load failureDaniele Ceraolo Spurio
When the GuC fails to load we declare the device wedged. However, the very first GuC load attempt on GT0 (from xe_gt_init_hwconfig) is done before the GT1 GuC objects are initialized, so things go bad when the wedge code attempts to cleanup GT1. To fix this, check the initialization status in the functions called during wedge. Fixes: 7dbe8af13c18 ("drm/xe: Wedge the entire device") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Jonathan Cavitt <jonathan.cavitt@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Zhanjun Dong <zhanjun.dong@intel.com> Cc: stable@vger.kernel.org # v6.12+: 1e1981b16bb1: drm/xe: Fix taking invalid lock on wedge Cc: stable@vger.kernel.org # v6.12+ Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250611214453.1159846-2-daniele.ceraolospurio@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-06-12Merge tag 'bitmap-for-6.16-rc2' of https://github.com/norov/linuxLinus Torvalds
Pull bitmap fix from Yury Norov: "Fix for __GENMASK() and __GENMASK_ULL() in UAPI" * tag 'bitmap-for-6.16-rc2' of https://github.com/norov/linux: uapi: bitops: use UAPI-safe variant of BITS_PER_LONG again
2025-06-12drm: renesas: rz-du: mipi_dsi: Add function pointers for configuring VCLK ↵Lad Prabhakar
and mode validation Introduce `dphy_conf_clks` and `dphy_mode_clk_check` callbacks in `rzg2l_mipi_dsi_hw_info` to configure the VCLK and validate supported display modes. On the RZ/V2H(P) SoC, the DSI PLL dividers need to be as accurate as possible. To ensure compatibility with both RZ/G2L and RZ/V2H(P) SoCs, function pointers are introduced. Modify `rzg2l_mipi_dsi_startup()` to use `dphy_conf_clks` for clock configuration and `rzg2l_mipi_dsi_bridge_mode_valid()` to invoke `dphy_mode_clk_check` for mode validation. This change ensures proper operation across different SoC variants by allowing fine-grained control over clock configuration and mode validation. Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250609225630.502888-10-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-06-12drm: renesas: rz-du: mipi_dsi: Add dphy_late_init() callback for RZ/V2H(P)Lad Prabhakar
Introduce the `dphy_late_init` callback in `rzg2l_mipi_dsi_hw_info` to allow additional D-PHY register configurations after enabling data and clock lanes. This is required for the RZ/V2H(P) SoC but not for the RZ/G2L SoC. Modify `rzg2l_mipi_dsi_startup()` to invoke `dphy_late_init` if defined, ensuring SoC-specific initialization is performed only when necessary. This change prepares for RZ/V2H(P) SoC support while maintaining compatibility with existing platforms. Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250609225630.502888-9-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-06-12drm: renesas: rz-du: mipi_dsi: Add feature flag for 16BPP supportLad Prabhakar
Introduce the `RZ_MIPI_DSI_FEATURE_16BPP` flag in `rzg2l_mipi_dsi_hw_info` to indicate support for 16BPP pixel formats. The RZ/V2H(P) SoC supports 16BPP, whereas this feature is missing on the RZ/G2L SoC. Update the `mipi_dsi_host_attach()` function to check this flag before allowing 16BPP formats. If the SoC does not support 16BPP, return an error to prevent incorrect format selection. This change enables finer-grained format support control for different SoC variants. Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250609225630.502888-8-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-06-12drm: renesas: rz-du: mipi_dsi: Use mHz for D-PHY frequency calculationsLad Prabhakar
Pass the HSFREQ in milli-Hz to the `dphy_init()` callback to improve precision, especially for the RZ/V2H(P) SoC, where PLL dividers require high accuracy. These changes prepare the driver for upcoming RZ/V2H(P) SoC support. Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250609225630.502888-7-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-06-12drm: renesas: rz-du: mipi_dsi: Make "rst" reset control optional for RZ/V2H(P)Lad Prabhakar
In preparation for adding support for the Renesas RZ/V2H(P) SoC, make the "rst" reset control optional in the MIPI DSI driver. The RZ/V2H(P) SoC does not provide this reset line, and attempting to acquire it using the mandatory API causes probe failure. Switching to devm_reset_control_get_optional_exclusive() ensures compatibility with both SoCs that provide this reset line and those that do not, such as RZ/V2H(P). Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250609225630.502888-6-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-06-12drm: renesas: rz-du: mipi_dsi: Add OF data supportLad Prabhakar
n preparation for adding support for the Renesas RZ/V2H(P) SoC, this patch introduces a mechanism to pass SoC-specific information via OF data in the DSI driver. This enables the driver to adapt dynamically to various SoC-specific requirements without hardcoding configurations. The MIPI DSI interface on the RZ/V2H(P) SoC is nearly identical to the one on the RZ/G2L SoC. While the LINK registers are shared between the two SoCs, the D-PHY registers differ. Also the VCLK range differs on both these SoCs. To accommodate these differences `struct rzg2l_mipi_dsi_hw_info` is introduced and as now passed as OF data. These changes lay the groundwork for the upcoming RZ/V2H(P) SoC support by allowing SoC-specific data to be passed through OF. Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250609225630.502888-5-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-06-12drm: renesas: rz-du: mipi_dsi: Use VCLK for HSFREQ calculationLad Prabhakar
Update the RZ/G2L MIPI DSI driver to calculate HSFREQ using the actual VCLK rate instead of the mode clock. The relationship between HSCLK and VCLK is: vclk * bpp <= hsclk * 8 * lanes Retrieve the VCLK rate using `clk_get_rate(dsi->vclk)`, ensuring that HSFREQ accurately reflects the clock rate set in hardware, leading to better precision in data transmission. Additionally, use `DIV_ROUND_CLOSEST_ULL` for a more precise division when computing `hsfreq`. Also, update unit conversions to use correct scaling factors for better clarity and correctness. Since `clk_get_rate()` returns the clock rate in Hz, update the HSFREQ threshold comparisons to use Hz instead of kHz to ensure correct behavior. Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250609225630.502888-4-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-06-12drm: renesas: rz-du: mipi_dsi: Simplify HSFREQ calculationLad Prabhakar
Simplify the high-speed clock frequency (HSFREQ) calculation by removing the redundant multiplication and division by 8. The updated equation: hsfreq = mode->clock * bpp / dsi->lanes; produces the same result while improving readability and clarity. Additionally, update the comment to clarify the relationship between HS clock bit frequency, HS byte clock frequency, and HSFREQ. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250609225630.502888-3-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-06-12drm: renesas: rz-du: mipi_dsi: Add min check for VCLK rangeLad Prabhakar
The VCLK range for Renesas RZ/G2L SoC is 5.803 MHz to 148.5 MHz. Add a minimum clock check in the mode_valid callback to ensure that the clock value does not fall below the valid range. Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250609225630.502888-2-prabhakar.mahadev-lad.rj@bp.renesas.com
2025-06-12smb: improve directory cache reuse for readdir operationsBharath SM
Currently, cached directory contents were not reused across subsequent 'ls' operations because the cache validity check relied on comparing the ctx pointer, which changes with each readdir invocation. As a result, the cached dir entries was not marked as valid and the cache was not utilized for subsequent 'ls' operations. This change uses the file pointer, which remains consistent across all readdir calls for a given directory instance, to associate and validate the cache. As a result, cached directory contents can now be correctly reused, improving performance for repeated directory listings. Performance gains with local windows SMB server: Without the patch and default actimeo=1: 1000 directory enumeration operations on dir with 10k files took 135.0s With this patch and actimeo=0: 1000 directory enumeration operations on dir with 10k files took just 5.1s Signed-off-by: Bharath SM <bharathsm@microsoft.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2025-06-12drm: omapdrm: reduce clang stack usageArnd Bergmann
The thread sanitizer makes the stack usage explode from extra variable spills in dispc_runtime_resume: drivers/gpu/drm/omapdrm/dss/dispc.c:4735:27: error: stack frame size (1824) exceeds limit (1280) in 'dispc_runtime_resume' [-Werror,-Wframe-larger-than] I could not figure out what exactly is going on here, but I see that whenever dispc_restore_context() is not inlined, that function and its caller shrink below 900 bytes combined of stack usage. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20250610092737.2641862-1-arnd@kernel.org Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
2025-06-12drm/xe: Make WA BB part of LRC BOMatthew Brost
No idea why, but without this GuC context switches randomly fail when running IGTs in a loop. Need to follow up why this fixes the aforementioned issue but can live with a stable driver for now. Fixes: 617d824c5323 ("drm/xe: Add WA BB to capture active context utilization") Cc: stable@vger.kernel.org Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Tested-by: Shuicheng Lin <shuicheng.lin@intel.com> Link: https://lore.kernel.org/r/20250612031925.4009701-1-matthew.brost@intel.com
2025-06-12drm/i915/dp: Disable the AUX DPCD probe quirk if it's not requiredImre Deak
Reading DPCD registers has side-effects and some of these can cause a problem for instance during link training. Based on this it's better to avoid the probing quirk done before each DPCD register read, limiting this to the monitor which requires it. The only known problematic monitor is an external SST sink, so keep the quirk disabled always for eDP and MST sinks. Reenable the quirk after a hotplug event and after resuming from a power state without hotplug support, until the subsequent EDID based detection. v2: Add a helper for determining the need/setting the probing. (Jani) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20250609125556.109538-2-imre.deak@intel.com
2025-06-12drm/dp: Add an EDID quirk for the DPCD register access probeImre Deak
Reading DPCD registers has side-effects and some of these can cause a problem for instance during link training. Based on this it's better to avoid the probing quirk done before each DPCD register read, limiting this to the monitor which requires it. Add an EDID quirk for this. Leave the quirk enabled by default, allowing it to be disabled after the monitor is detected. v2: Fix lockdep wrt. drm_dp_aux::hw_mutex when calling drm_dp_dpcd_set_probe_quirk() with a dependent lock already held. v3: Add a helper for determining if DPCD probing is needed. (Jani) v4: - s/drm_dp_dpcd_set_probe_quirk/drm_dp_dpcd_set_probe (Jani) - Fix documentation of drm_dp_dpcd_set_probe(). - Add comment at the end of internal quirk entries. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20250609125556.109538-1-imre.deak@intel.com
2025-06-12drm/xe: Use WRITE_ONCE for range->tile_invalidated updateMatthew Brost
Updating range->tile_invalidated should be done with WRITE_ONCE to pair with READ_ONCE in opportunistic checks. Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Maarten Lankhrost <maarten.lankhorst@linux.intel.com> Link: https://lore.kernel.org/r/20250604234712.2441130-1-matthew.brost@intel.com
2025-06-12drm/xe: Don't use drm exec locking in SVM pagefaultsMatthew Brost
Only the VM dma-resv lock is needed in SVM pagefaults so xe_vm_lock/unlock can be used instead of drm exec. Micro optimization but should save some CPU cycles in a critical path. Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Link: https://lore.kernel.org/r/20250603174012.2195759-1-matthew.brost@intel.com
2025-06-12drm/edid: Add support for quirks visible to DRM core and driversImre Deak
Add support for EDID based quirks which can be queried outside of the EDID parser iteself by DRM core and drivers. There are at least two such quirks applicable to all drivers: the DPCD register access probe quirk and the 128b/132b DPRX Lane Count Conversion quirk (see 3.5.2.16.3 in the v2.1a DP Standard). The latter quirk applies to panels with specific EDID panel names, support for defining a quirk this way will be added as a follow-up. v2: Reset global_quirks in drm_reset_display_info(). v3: (Jani) - Use one list for both the global and internal quirks. - Drop change for panel name specific quirks. - Add comment about the way quirks should be queried. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20250605082850.65136-4-imre.deak@intel.com
2025-06-12smb: client: fix perf regression with deferred closesPaulo Alcantara
Customer reported that one of their applications started failing to open files with STATUS_INSUFFICIENT_RESOURCES due to NetApp server hitting the maximum number of opens to same file that it would allow for a single client connection. It turned out the client was failing to reuse open handles with deferred closes because matching ->f_flags directly without masking off O_CREAT|O_EXCL|O_TRUNC bits first broke the comparision and then client ended up with thousands of deferred closes to same file. Those bits are already satisfied on the original open, so no need to check them against existing open handles. Reproducer: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <fcntl.h> #include <pthread.h> #define NR_THREADS 4 #define NR_ITERATIONS 2500 #define TEST_FILE "/mnt/1/test/dir/foo" static char buf[64]; static void *worker(void *arg) { int i, j; int fd; for (i = 0; i < NR_ITERATIONS; i++) { fd = open(TEST_FILE, O_WRONLY|O_CREAT|O_APPEND, 0666); for (j = 0; j < 16; j++) write(fd, buf, sizeof(buf)); close(fd); } } int main(int argc, char *argv[]) { pthread_t t[NR_THREADS]; int fd; int i; fd = open(TEST_FILE, O_WRONLY|O_CREAT|O_TRUNC, 0666); close(fd); memset(buf, 'a', sizeof(buf)); for (i = 0; i < NR_THREADS; i++) pthread_create(&t[i], NULL, worker, NULL); for (i = 0; i < NR_THREADS; i++) pthread_join(t[i], NULL); return 0; } Before patch: $ mount.cifs //srv/share /mnt/1 -o ... $ mkdir -p /mnt/1/test/dir $ gcc repro.c && ./a.out ... number of opens: 1391 After patch: $ mount.cifs //srv/share /mnt/1 -o ... $ mkdir -p /mnt/1/test/dir $ gcc repro.c && ./a.out ... number of opens: 1 Cc: linux-cifs@vger.kernel.org Cc: David Howells <dhowells@redhat.com> Cc: Jay Shin <jaeshin@redhat.com> Cc: Pierguido Lambri <plambri@redhat.com> Fixes: b8ea3b1ff544 ("smb: enable reuse of deferred file handles for write operations") Acked-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-06-12drm/edid: Define the quirks in an enum listImre Deak
An enum list is better suited to define a quirk list, do that. This makes looking up a quirk more robust and also allows for separating quirks internal to the EDID parser and global quirks which can be queried outside of the EDID parser (added as a follow-up). Suggested-by: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20250605082850.65136-3-imre.deak@intel.com
2025-06-12drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUSImre Deak
Reading DPCD registers has side-effects in general. In particular accessing registers outside of the link training register range (0x102-0x106, 0x202-0x207, 0x200c-0x200f, 0x2216) is explicitly forbidden by the DP v2.1 Standard, see 3.6.5.1 DPTX AUX Transaction Handling Mandates 3.6.7.4 128b/132b DP Link Layer LTTPR Link Training Mandates Based on my tests, accessing the DPCD_REV register during the link training of an UHBR TBT DP tunnel sink leads to link training failures. Solve the above by using the DP_LANE0_1_STATUS (0x202) register for the DPCD register access quirk. Cc: <stable@vger.kernel.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20250605082850.65136-2-imre.deak@intel.com
2025-06-12Merge tag 'net-6.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth and wireless. Current release - regressions: - af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD Current release - new code bugs: - eth: airoha: correct enable mask for RX queues 16-31 - veth: prevent NULL pointer dereference in veth_xdp_rcv when peer disappears under traffic - ipv6: move fib6_config_validate() to ip6_route_add(), prevent invalid routes Previous releases - regressions: - phy: phy_caps: don't skip better duplex match on non-exact match - dsa: b53: fix untagged traffic sent via cpu tagged with VID 0 - Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused transient packet loss, exact reason not fully understood, yet Previous releases - always broken: - net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6) - sched: sfq: fix a potential crash on gso_skb handling - Bluetooth: intel: improve rx buffer posting to avoid causing issues in the firmware - eth: intel: i40e: make reset handling robust against multiple requests - eth: mlx5: ensure FW pages are always allocated on the local NUMA node, even when device is configure to 'serve' another node - wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850, prevent kernel crashes - wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request() for 3 sec if fw_stats_done is not set" * tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits) selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context net: ethtool: Don't check if RSS context exists in case of context 0 af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD. ipv6: Move fib6_config_validate() to ip6_route_add(). net: drv: netdevsim: don't napi_complete() from netpoll net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get() veth: prevent NULL pointer dereference in veth_xdp_rcv net_sched: remove qdisc_tree_flush_backlog() net_sched: ets: fix a race in ets_qdisc_change() net_sched: tbf: fix a race in tbf_change() net_sched: red: fix a race in __red_change() net_sched: prio: fix a race in prio_tune() net_sched: sch_sfq: reject invalid perturb period net: phy: phy_caps: Don't skip better duplex macth on non-exact match MAINTAINERS: Update Kuniyuki Iwashima's email address. selftests: net: add test case for NAT46 looping back dst net: clear the dst when changing skb protocol net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper net/mlx5e: Fix leak of Geneve TLV option object net/mlx5: HWS, make sure the uplink is the last destination ...
2025-06-12drm/xe/lrc: Use a temporary buffer for WA BBLucas De Marchi
In case the BO is in iomem, we can't simply take the vaddr and write to it. Instead, prepare a separate buffer that is later copied into io memory. Right now it's just a few words that could be using xe_map_write32(), but the intention is to grow the WA BB for other uses. Fixes: 617d824c5323 ("drm/xe: Add WA BB to capture active context utilization") Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://lore.kernel.org/r/20250604-wa-bb-fix-v1-1-0dfc5dafcef0@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit ef48715b2d3df17c060e23b9aa636af3d95652f8) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-12Merge tag 'pinctrl-v6.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Add some missing pins on the Qualcomm QCM2290, along with a managed resources patch that make it clean and nice - Drop an unused function in the ST Micro driver - Drop bouncing MAINTAINER entry - Drop of_match_ptr() macro to rid compile warnings in the TB10x driver - Fix up calculation of pin numbers from base in the Sunxi driver * tag 'pinctrl-v6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sunxi: dt: Consider pin base when calculating bank number from pin pinctrl: tb10x: Drop of_match_ptr for ID table pinctrl: MAINTAINERS: Drop bouncing Jianlong Huang pinctrl: st: Drop unused st_gpio_bank() function pinctrl: qcom: pinctrl-qcm2290: Add missing pins pinctrl: qcom: switch to devm_gpiochip_add_data()
2025-06-12Merge tag 'arc-6.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - arch_atomic64_cmpxchg relaxed variant [Jason] - use of inbuilt swap in stack unwinder [Yu-Chun Lin] - use of __ASSEMBLER__ in kernel headers [Thomas Huth] * tag 'arc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: Replace __ASSEMBLY__ with __ASSEMBLER__ in the non-uapi headers ARC: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers ARC: unwind: Use built-in sort swap to reduce code size and improve performance ARC: atomics: Implement arch_atomic64_cmpxchg using _relaxed
2025-06-12Merge tag 'wireless-2025-06-12' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Another quick round of updates: - revert mwifiex HT40 that was causing issues - many ath10k/ath11k/ath12k fixes - re-add some iwlwifi code I lost in a merge - use kfree_sensitive() on an error path in cfg80211 * tag 'wireless-2025-06-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: cfg80211: use kfree_sensitive() for connkeys cleanup wifi: iwlwifi: fix merge damage related to iwl_pci_resume Revert "wifi: mwifiex: Fix HT40 bandwidth issue." wifi: ath12k: fix uaf in ath12k_core_init() wifi: ath12k: Fix hal_reo_cmd_status kernel-doc wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850 wifi: ath11k: validate ath11k_crypto_mode on top of ath11k_core_qmi_firmware_ready wifi: ath11k: consistently use ath11k_mac_get_fw_stats() wifi: ath11k: move locking outside of ath11k_mac_get_fw_stats() wifi: ath11k: adjust unlock sequence in ath11k_update_stats_event() wifi: ath11k: move some firmware stats related functions outside of debugfs wifi: ath11k: don't wait when there is no vdev started wifi: ath11k: don't use static variables in ath11k_debugfs_fw_stats_process() wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request() wil6210: fix support for sparrow chipsets wifi: ath10k: Avoid vdev delete timeout when firmware is already down ath10k: snoc: fix unbalanced IRQ enable in crash recovery ==================== Link: https://patch.msgid.link/20250612082519.11447-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12Merge branch 'fix-ntuple-rules-targeting-default-rss'Jakub Kicinski
Gal Pressman says: ==================== Fix ntuple rules targeting default RSS This series addresses a regression in ethtool flow steering where rules targeting the default RSS context (context 0) were incorrectly rejected. The default RSS context always exists but is not stored in the rss_ctx xarray like additional contexts. The current validation logic was checking for the existence of context 0 in this array, causing valid flow steering rules to be rejected. This prevented configurations such as: - High priority rules directing specific traffic to the default context - Low priority catch-all rules directing remaining traffic to additional contexts Patch 1 fixes the validation logic to skip the existence check for context 0. Patch 2 adds a selftest that verifies this behavior. v3: https://lore.kernel.org/20250609120250.1630125-1-gal@nvidia.com v2: https://lore.kernel.org/20250225071348.509432-1-gal@nvidia.com ==================== Link: https://patch.msgid.link/20250612071958.1696361-1-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS ↵Gal Pressman
context Add test_rss_default_context_rule() to verify that ntuple rules can correctly direct traffic to the default RSS context (context 0). The test creates two ntuple rules with explicit location priorities: - A high-priority rule (loc 0) directing specific port traffic to context 0. - A low-priority rule (loc 1) directing all other TCP traffic to context 1. This validates that: 1. Rules targeting the default context function properly. 2. Traffic steering works as expected when mixing default and additional RSS contexts. The test was written by AI, and reviewed by humans. Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250612071958.1696361-3-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12net: ethtool: Don't check if RSS context exists in case of context 0Gal Pressman
Context 0 (default context) always exists, there is no need to check whether it exists or not when adding a flow steering rule. The existing check fails when creating a flow steering rule for context 0 as it is not stored in the rss_ctx xarray. For example: $ ethtool --config-ntuple eth2 flow-type tcp4 dst-ip 194.237.147.23 dst-port 19983 context 0 loc 618 rmgr: Cannot insert RX class rule: Invalid argument Cannot insert classification rule An example usecase for this could be: - A high-priority rule (loc 0) directing specific port traffic to context 0. - A low-priority rule (loc 1) directing all other TCP traffic to context 1. This is a user-visible regression that was caught in our testing environment, it was not reported by a user yet. Fixes: de7f7582dff2 ("net: ethtool: prevent flow steering to RSS contexts which don't exist") Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20250612071958.1696361-2-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12Merge tag 'for-net-2025-06-11' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - eir: Fix NULL pointer deference on eir_get_service_data - eir: Fix possible crashes on eir_create_adv_data - hci_sync: Fix broadcast/PA when using an existing instance - ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets - ISO: Fix not using bc_sid as advertisement SID - MGMT: Fix sparse errors * tag 'for-net-2025-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: MGMT: Fix sparse errors Bluetooth: ISO: Fix not using bc_sid as advertisement SID Bluetooth: ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets Bluetooth: eir: Fix possible crashes on eir_create_adv_data Bluetooth: hci_sync: Fix broadcast/PA when using an existing instance Bluetooth: Fix NULL pointer deference on eir_get_service_data ==================== Link: https://patch.msgid.link/20250611204944.1559356-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.Kuniyuki Iwashima
Before the cited commit, the kernel unconditionally embedded SCM credentials to skb for embryo sockets even when both the sender and listener disabled SO_PASSCRED and SO_PASSPIDFD. Now, the credentials are added to skb only when configured by the sender or the listener. However, as reported in the link below, it caused a regression for some programs that assume credentials are included in every skb, but sometimes not now. The only problematic scenario would be that a socket starts listening before setting the option. Then, there will be 2 types of non-small race window, where a client can send skb without credentials, which the peer receives as an "invalid" message (and aborts the connection it seems ?): Client Server ------ ------ s1.listen() <-- No SO_PASS{CRED,PIDFD} s2.connect() s2.send() <-- w/o cred s1.setsockopt(SO_PASS{CRED,PIDFD}) s2.send() <-- w/ cred or Client Server ------ ------ s1.listen() <-- No SO_PASS{CRED,PIDFD} s2.connect() s2.send() <-- w/o cred s3, _ = s1.accept() <-- Inherit cred options s2.send() <-- w/o cred but not set yet s3.setsockopt(SO_PASS{CRED,PIDFD}) s2.send() <-- w/ cred It's unfortunate that buggy programs depend on the behaviour, but let's restore the previous behaviour. Fixes: 3f84d577b79d ("af_unix: Inherit sk_flags at connect().") Reported-by: Jacek Łuczak <difrost.kernel@gmail.com> Closes: https://lore.kernel.org/all/68d38b0b-1666-4974-85d4-15575789c8d4@gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Tested-by: Christian Heusel <christian@heusel.eu> Tested-by: André Almeida <andrealmeid@igalia.com> Tested-by: Jacek Łuczak <difrost.kernel@gmail.com> Link: https://patch.msgid.link/20250611202758.3075858-1-kuni1840@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 18:48:21 +0000