| Age | Commit message (Collapse) | Author |
|---|
|
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.6.3.7 states that the Modem Status
Command (MSC) shall only be used if the basic option was chosen.
The current implementation uses MSC frames even if advanced option was
chosen to inform the peer about modem line state updates. A standard
conform peer may choose to discard these frames in advanced option mode.
Furthermore, gsmtty_modem_update() is not part of the 'tty_operations'
functions despite its name.
Rename gsmtty_modem_update() to gsm_modem_update() to clarify this. Split
its function into gsm_modem_upd_via_data() and gsm_modem_upd_via_msc()
depending on the encoding and adaption. Introduce gsm_dlci_modem_output()
as adaption of gsm_dlci_data_output() to encode and queue empty frames in
advanced option mode. Use it in gsm_modem_upd_via_data().
gsm_modem_upd_via_msc() is based on the initial gsmtty_modem_update()
function which used only MSC frames to update modem states.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220422071025.5490-2-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Dynamic virtual tty registration was introduced to allow the user to handle
these cases with uevent rules. The following commits relate to this:
Commit 5b87686e3203 ("tty: n_gsm: Modify gsmtty driver register method when config requester")
Commit 0b91b5332368 ("tty: n_gsm: Save dlci address open status when config requester")
Commit 46292622ad73 ("tty: n_gsm: clean up indenting in gsm_queue()")
However, the following behavior can be seen with this implementation:
- n_gsm ldisc is activated via ioctl
- all configuration parameters are set to their default value (initiator=0)
- the mux gets activated and attached and gsmtty0 is being registered in
in gsm_dlci_open() after DLCI 0 was established (DLCI 0 is the control
channel)
- the user configures n_gsm via ioctl GSMIOC_SETCONF as initiator
- this re-attaches the n_gsm mux
- no new gsmtty devices are registered in gsmld_attach_gsm() because the
mux is already active
- the initiator side registered only the control channel as gsmtty0
(which should never happen) and no user channel tty
The commits above make it impossible to operate the initiator side as no
user channel tty is or will be available.
On the other hand, this behavior will make it also impossible to allow DLCI
parameter negotiation on responder side in the future. The responder side
first needs to provide a device for the application before the application
can set its parameters of the associated DLCI via ioctl.
Note that the user application is still able to detect a link establishment
without relaying to uevent by waiting for DTR open on responder side. This
is the same behavior as on a physical serial interface. And on initiator
side a tty hangup can be detected if a link establishment request failed.
Revert the commits above completely to always register all user channels
and no control channel after mux attachment. No other changes are made.
Fixes: 5b87686e3203 ("tty: n_gsm: Modify gsmtty driver register method when config requester")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220422071025.5490-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 927728a34f11b5a27f4610bdb7068317d6fdc72a.
Once the uart_port->rs485->flag is set to SER_RS485_ENABLED, the port
should always work in RS485 mode. If users want the port to leave
RS485 mode, they need to call ioctl() to clear SER_RS485_ENABLED.
So here we shouldn't clear the RS485 bits in the shutdown().
Fixes: 927728a34f11 ("serial: sc16is7xx: Clear RS485 bits in the shutdown")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220418094339.678144-1-hui.wang@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This puts the link for libbpf API documentation into the sidebar
for much easier navigation.
You can preview this change at:
https://libbpf-test.readthedocs.io/en/latest/
Note that the link is hardcoded to the production version, so you
can see that it self references itself here for now:
https://libbpf-test.readthedocs.io/en/latest/api.html
This will need to make its way into the libbpf mirror, before being
deployed to libbpf.readthedocs.org
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220422031050.303984-1-grantseltzer@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect fixes for v5.18
This contains a fix for a reported issue on sc7180 platforms, where
one of the resources has been incorrectly modelled as both clock and
interconnect, which is causing a crash when both frameworks try to
manage it. Fix the same issue also on another platform that appears
to be affected by the same.
- interconnect: qcom: sc7180: Drop IP0 interconnects
- interconnect: qcom: sdx55: Drop IP0 interconnects
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: sdx55: Drop IP0 interconnects
interconnect: qcom: sc7180: Drop IP0 interconnects
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-linus
Vinod writes:
phy: fixes for 5.18
Fixes for bunch of drivers:
- TI fixes for runtime disable, missing of_node_put and error handling
- Samsung fixes for device_put and of_node_put
- Amlogic error path handling
* tag 'phy-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: amlogic: fix error path in phy_g12a_usb3_pcie_probe()
phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe
phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe
phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks
phy: ti: tusb1210: Fix an error handling path in tusb1210_probe()
phy: samsung: exynos5250-sata: fix missing device put in probe error paths
phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe
phy: ti: Fix missing of_node_put in ti_pipe3_get_sysctrl()
phy: ti: tusb1210: Make tusb1210_chg_det_states static
|
|
deletion
This patch fixes spurious EEXIST errors.
Extend d2df92e98a34 ("netfilter: nft_set_rbtree: handle element
re-addition after deletion") to deal with elements with same end flags
in the same transation.
Reset the overlap flag as described by 7c84d41416d8 ("netfilter:
nft_set_rbtree: Detect partial overlaps on insertion").
Fixes: 7c84d41416d8 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion")
Fixes: d2df92e98a34 ("netfilter: nft_set_rbtree: handle element re-addition after deletion")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-linus
Manivannan writes:
MHI fixes for v5.18
Couple of patches fixing the hibernation issue seen on MHI endpoint devices like
SDX65 modems:
- During hibernation, the host puts the device into D3cold after thaw() stage.
But at that time, the device would be in M0 state. So the device emits a
warning (not visible to the host but to device firmware only) stating invalid
transition. This is fixed by adding a poweroff() callback that puts the device
into M3 before D3cold.
- There is a possibility that the recovery worker might be running while trying
to powerdown the device. So flush the recovery worker before that.
* tag 'mhi-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: pci_generic: Flush recovery worker during freeze
bus: mhi: host: pci_generic: Add missing poweroff() PM callback
|
|
Make sure not to set run_stop bit or link state change request while
initiating soft-reset. Register read-modify-write operation may
unintentionally start the controller before the initialization completes
with its previous DCTL value, which can cause initialization failure.
Fixes: f59dcab17629 ("usb: dwc3: core: improve reset sequence")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/6aecbd78328f102003d40ccf18ceeebd411d3703.1650594792.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch converts the existing mediatek-net.txt binding file
in yaml format.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
of_node_put() will check for NULL value.
Fixes: a20f997010c4 ("net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Guillaume Nault says:
====================
ipv4: First steps toward removing RTO_ONLINK
RTO_ONLINK is a flag that allows to reduce the scope of route lookups.
It's stored in a normally unused bit of the ->flowi4_tos field, in
struct flowi4. However it has several problems:
* This bit is also used by ECN. Although ECN bits are supposed to be
cleared before doing a route lookup, it happened that some code
paths didn't properly sanitise their ->flowi4_tos. So this mechanism
is fragile and we had bugs in the past where ECN bits slipped in and
could end up being erroneously interpreted as RTO_ONLINK.
* A dscp_t type was recently introduced to ensure ECN bits are cleared
during route lookups. ->flowi4_tos is the most important structure
field to convert, but RTO_ONLINK prevents such conversion, as dscp_t
mandates that ECN bits (where RTO_ONLINK is stored) be zero.
Therefore we need to stop using RTO_ONLINK altogether. Fortunately
RTO_ONLINK isn't a necessity. Instead of passing a flag in ->flowi4_tos
to tell the route lookup function to restrict the scope, we can simply
initialise the scope correctly.
Patch 1 does some preparatory work: it stops resetting ->flowi4_scope
automatically before a route lookup, thus allowing callers to set their
desired scope without having to rely on the RTO_ONLINK flag.
Patch 2-3 convert a few code paths to avoid relying on RTO_ONLINK.
More conversions will have to take place before we can eventually
remove this flag.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All the *_redirect() and *_update_pmtu() functions initialise their
struct flowi4 variable with either __build_flow_key() or
build_sk_flow_key(). When sk is provided, these functions use
RT_CONN_FLAGS() to set ->flowi4_tos and always use RT_SCOPE_UNIVERSE
for ->flowi4_scope. Then they rely on ip_rt_fix_tos() to adjust the
scope based on the RTO_ONLINK bit and to mask the tos with
IPTOS_RT_MASK.
This patch modifies __build_flow_key() and build_sk_flow_key() to
properly initialise ->flowi4_tos and ->flowi4_scope, so that the
ICMP redirects and PMTU handlers don't need an extra call to
ip_rt_fix_tos() before doing a fib lookup. That is, we:
* Drop RT_CONN_FLAGS(): use ip_sock_rt_tos() and ip_sock_rt_scope()
instead, so that we don't have to rely on ip_rt_fix_tos() to adjust
the scope anymore.
* Apply IPTOS_RT_MASK to the tos, so that we don't need
ip_rt_fix_tos() to do it for us.
* Drop the ip_rt_fix_tos() calls that now become useless.
The only remaining ip_rt_fix_tos() caller is ip_route_output_key_hash()
which needs it as long as external callers still use the RTO_ONLINK
flag.
Note:
This patch also drops some useless RT_TOS() calls as IPTOS_RT_MASK is
a stronger mask.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that ip_rt_fix_tos() doesn't reset ->flowi4_scope unconditionally,
we don't have to rely on the RTO_ONLINK bit to properly set the scope
of a flowi4 structure. We can just set ->flowi4_scope explicitly and
avoid using RTO_ONLINK in ->flowi4_tos.
This patch converts callers of ip_route_connect(). Instead of setting
the tos parameter with RT_CONN_FLAGS(sk), as all callers do, we can:
1- Drop the tos parameter from ip_route_connect(): its value was
entirely based on sk, which is also passed as parameter.
2- Set ->flowi4_scope depending on the SOCK_LOCALROUTE socket option
instead of always initialising it with RT_SCOPE_UNIVERSE (let's
define ip_sock_rt_scope() for this purpose).
3- Avoid overloading ->flowi4_tos with RTO_ONLINK: since the scope is
now properly initialised, we don't need to tell ip_rt_fix_tos() to
adjust ->flowi4_scope for us. So let's define ip_sock_rt_tos(),
which is the same as RT_CONN_FLAGS() but without the RTO_ONLINK
bit overload.
Note:
In the original ip_route_connect() code, __ip_route_output_key()
might clear the RTO_ONLINK bit of fl4->flowi4_tos (because of
ip_rt_fix_tos()). Therefore flowi4_update_output() had to reuse the
original tos variable. Now that we don't set RTO_ONLINK any more,
this is not a problem and we can use fl4->flowi4_tos in
flowi4_update_output().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All callers already initialise ->flowi4_scope with RT_SCOPE_UNIVERSE,
either by manual field assignment, memset(0) of the whole structure or
implicit structure initialisation of on-stack variables
(RT_SCOPE_UNIVERSE actually equals 0).
Therefore, we don't need to always initialise ->flowi4_scope in
ip_rt_fix_tos(). We only need to reduce the scope to RT_SCOPE_LINK when
the special RTO_ONLINK flag is present in the tos.
This will allow some code simplification, like removing
ip_rt_fix_tos(). Also, the long term idea is to remove RTO_ONLINK
entirely by properly initialising ->flowi4_scope, instead of
overloading ->flowi4_tos with a special flag. Eventually, this will
allow to convert ->flowi4_tos to dscp_t.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Radhey Shyam Pandey says:
====================
net: macb: Make ZynqMP SGMII phy configuration optional
This patchset drop phy-names property from MACB node and also make
SGMII Phy configuration optional. The motivation for this change
is to support traditional usescase in which first stage bootloader
does PS-GT configuration, and should still be supported in macb
driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the macb binding documentation "phys" is an optional property. Make
implementation in line with it. This change allows the traditional flow
in which first stage bootloader does PS-GT configuration to work along
with newer use cases in which PS-GT configuration is managed by the
phy-zynqmp driver.
It fixes below macb probe failure when macb DT node doesn't have SGMII
phys handle.
"macb ff0b0000.ethernet: error -ENODEV: failed to get PS-GTR PHY"
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In zynqmp SGMII initialization, there is a single PHY so remove phy-names
property as there is no real need of having it.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Kuniyuki Iwashima says:
====================
ipv6: Use ipv6_only_sock helper function.
The first patch removes __ipv6_only_sock(), and the second replaces
ipv6only tests with ipv6_only_sock().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch replaces some sk_ipv6only tests with ipv6_only_sock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 9fe516ba3fb2 ("inet: move ipv6only in sock_common"),
ipv6_only_sock() and __ipv6_only_sock() are the same macro. Let's
remove the one.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Smatch reports this issue
sr9800.h:166:53: warning: symbol 'SR9800_BULKIN_SIZE' was not declared. Should it be static?
Global variables should not be defined in header files.
This only works because sr9800.h in only included by sr9800.c
Change the storage-class specifier to static.
And since it does not change add type qualifier const.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Revise the rt5190a bucks and ldo property description.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1650610255-6180-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Correct the reg 0x09 size to one byte.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1650608810-3829-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The pmd_leaf() is used to test a leaf mapped PMD, however, it misses
the PROT_NONE mapped PMD on arm64. Fix it. A real world issue [1]
caused by this was reported by Qian Cai. Also fix pud_leaf().
Link: https://patchwork.kernel.org/comment/24798260/ [1]
Fixes: 8aa82df3c123 ("arm64: mm: add p?d_leaf() definitions")
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Link: https://lore.kernel.org/r/20220422060033.48711-1-songmuchun@bytedance.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Tegra194 and Tegra234 SoCs have the erratum that causes walk cache
entries to not be invalidated correctly. The problem is that the walk
cache index generated for IOVA is not same across translation and
invalidation requests. This is leading to page faults when PMD entry is
released during unmap and populated with new PTE table during subsequent
map request. Disabling large page mappings avoids the release of PMD
entry and avoid translations seeing stale PMD entry in walk cache.
Fix this by limiting the page mappings to PAGE_SIZE for Tegra194 and
Tegra234 devices. This is recommended fix from Tegra hardware design
team.
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Krishna Reddy <vdumpa@nvidia.com>
Co-developed-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Link: https://lore.kernel.org/r/20220421081504.24678-1-amhetre@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Occasionally objtool driven code patching (think .static_call_sites
.retpoline_sites etc..) goes sideways and it tries to patch an
instruction that doesn't match.
Much head-scatching and cursing later the problem is as outlined below
and affects every section that objtool generates for us, very much
including the ORC data. The below uses .static_call_sites because it's
convenient for demonstration purposes, but as mentioned the ORC
sections, .retpoline_sites and __mount_loc are all similarly affected.
Consider:
foo-weak.c:
extern void __SCT__foo(void);
__attribute__((weak)) void foo(void)
{
return __SCT__foo();
}
foo.c:
extern void __SCT__foo(void);
extern void my_foo(void);
void foo(void)
{
my_foo();
return __SCT__foo();
}
These generate the obvious code
(gcc -O2 -fcf-protection=none -fno-asynchronous-unwind-tables -c foo*.c):
foo-weak.o:
0000000000000000 <foo>:
0: e9 00 00 00 00 jmpq 5 <foo+0x5> 1: R_X86_64_PLT32 __SCT__foo-0x4
foo.o:
0000000000000000 <foo>:
0: 48 83 ec 08 sub $0x8,%rsp
4: e8 00 00 00 00 callq 9 <foo+0x9> 5: R_X86_64_PLT32 my_foo-0x4
9: 48 83 c4 08 add $0x8,%rsp
d: e9 00 00 00 00 jmpq 12 <foo+0x12> e: R_X86_64_PLT32 __SCT__foo-0x4
Now, when we link these two files together, you get something like
(ld -r -o foos.o foo-weak.o foo.o):
foos.o:
0000000000000000 <foo-0x10>:
0: e9 00 00 00 00 jmpq 5 <foo-0xb> 1: R_X86_64_PLT32 __SCT__foo-0x4
5: 66 2e 0f 1f 84 00 00 00 00 00 nopw %cs:0x0(%rax,%rax,1)
f: 90 nop
0000000000000010 <foo>:
10: 48 83 ec 08 sub $0x8,%rsp
14: e8 00 00 00 00 callq 19 <foo+0x9> 15: R_X86_64_PLT32 my_foo-0x4
19: 48 83 c4 08 add $0x8,%rsp
1d: e9 00 00 00 00 jmpq 22 <foo+0x12> 1e: R_X86_64_PLT32 __SCT__foo-0x4
Noting that ld preserves the weak function text, but strips the symbol
off of it (hence objdump doing that funny negative offset thing). This
does lead to 'interesting' unused code issues with objtool when ran on
linked objects, but that seems to be working (fingers crossed).
So far so good.. Now lets consider the objtool static_call output
section (readelf output, old binutils):
foo-weak.o:
Relocation section '.rela.static_call_sites' at offset 0x2c8 contains 1 entry:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 .text + 0
0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
foo.o:
Relocation section '.rela.static_call_sites' at offset 0x310 contains 2 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 .text + d
0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
foos.o:
Relocation section '.rela.static_call_sites' at offset 0x430 contains 4 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000100000002 R_X86_64_PC32 0000000000000000 .text + 0
0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
0000000000000008 0000000100000002 R_X86_64_PC32 0000000000000000 .text + 1d
000000000000000c 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
So we have two patch sites, one in the dead code of the weak foo and one
in the real foo. All is well.
*HOWEVER*, when the toolchain strips unused section symbols it
generates things like this (using new enough binutils):
foo-weak.o:
Relocation section '.rela.static_call_sites' at offset 0x2c8 contains 1 entry:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 foo + 0
0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
foo.o:
Relocation section '.rela.static_call_sites' at offset 0x310 contains 2 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 foo + d
0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
foos.o:
Relocation section '.rela.static_call_sites' at offset 0x430 contains 4 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000100000002 R_X86_64_PC32 0000000000000000 foo + 0
0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
0000000000000008 0000000100000002 R_X86_64_PC32 0000000000000000 foo + d
000000000000000c 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
And now we can see how that foos.o .static_call_sites goes side-ways, we
now have _two_ patch sites in foo. One for the weak symbol at foo+0
(which is no longer a static_call site!) and one at foo+d which is in
fact the right location.
This seems to happen when objtool cannot find a section symbol, in which
case it falls back to any other symbol to key off of, however in this
case that goes terribly wrong!
As such, teach objtool to create a section symbol when there isn't
one.
Fixes: 44f6a7c0755d ("objtool: Fix seg fault with Clang non-section symbols")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20220419203807.655552918@infradead.org
|
|
Elf{32,64}_Rela::r_addend is of type: Elf{32,64}_Sword, that means
that our reloc::addend needs to be long or face tuncation issues when
we do elf_rebuild_reloc_section():
- 107: 48 b8 00 00 00 00 00 00 00 00 movabs $0x0,%rax 109: R_X86_64_64 level4_kernel_pgt+0x80000067
+ 107: 48 b8 00 00 00 00 00 00 00 00 movabs $0x0,%rax 109: R_X86_64_64 level4_kernel_pgt-0x7fffff99
Fixes: 627fce14809b ("objtool: Add ORC unwind table generation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20220419203807.596871927@infradead.org
|
|
This reverts commit b6177d3240a4
ip-link command is testing kernel capability by sending a RTM_NEWLINK
request, without any argument. It accepts everything in reply, except
EOPNOTSUPP and EINVAL (functions iplink_have_newlink / accept_msg)
So we must keep compatiblity here, invalid empty message should not
return EINVAL
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Tested-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The NFP driver already supports assignment of 802.1Q VLANs to VFs
e.g.
# ip link set $DEV vf $VF_NUM vlan $VLAN_ID [proto 802.1Q]
This patch enhances the NFP driver to also allow assingment of
802.1ad VLANs to VFs.
e.g.
# ip link set $DEV vf $VF_NUM vlan $VLAN_ID proto 802.1ad
Signed-off-by: Bin Chen <bin.chen@corigine.com>
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Yinjun Zhang <yunjin.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix mistake in the original patch where limits were specified but the
handler didn't take care of the limits.
Signed-off-by: Arun Ajith S <aajith@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
remove unnecessary void* type castings.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
[sven@narfation.org: Fix missing const in batadv_choose* functions]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Variable status is being assigned a value that is never read, it is
being re-assigned again later on. The assignment is redundant and can
be removed.
Cleans up clang scan build warning:
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:582:7: warning: Although
the value stored to 'status' is used in the enclosing expression, the
value is never actually read from 'status' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is unnecessary to call spin_lock_bh() for you are already in a tasklet.
Signed-off-by: Yunbo Yu <yuyunbo519@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This version will contain all the (major or even only minor) changes for
Linux 5.19.
The version number isn't a semantic version number with major and minor
information. It is just encoding the year of the expected publishing as
Linux -rc1 and the number of published versions this year (starting at 0).
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
If major equal 0, register_chrdev() returns error code when it fails.
This function dynamically allocate a major and return its number on
success, so we should use "< 0" to check it instead of "!".
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Acked-By: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On HP Laptops, requires the same ALC285_FIXUP_HP_GPIO_LED quirk to
make its audio LEDs work.
So apply the quirk, and make it the last one since it's an LED quirk.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Fixes: 07bcab93946c ("ALSA: hda/realtek: Add support for HP Laptops")
Link: https://lore.kernel.org/r/20220422090845.230071-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The quirk ALC287_FIXUP_CS35L41_I2C_2 needs to chain the quirk
ALC269_FIXUP_THINKPAD_ACPI, otherwise the mute led will not work if a
thinkpad machine applies that quirk.
And it will be safe if non-thinkpad machines apply that quirk since
hda_fixup_thinkpad_acpi() will check and return in this case.
Fixes: ae7abe36e352e ("ALSA: hda/realtek: Add CS35L41 support for Thinkpad laptops")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220422073937.10073-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
I've switched jobs, so update my email address in MAINTAINERS
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://lore.kernel.org/r/20220418212016.2669086-1-jstultz@google.com
|
|
Update futex entry to use my new professional email address.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220421173254.29855-1-andrealmeid@igalia.com
|
|
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
d08ed852560e ("net: lan966x: Make sure to release ptp interrupt")
c8349639324a ("net: lan966x: Add FDMA functionality")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull drm fixes from Dave Airlie:
"Extra quiet after Easter, only have minor i915 and msm pulls. However
I haven't seen a PR from our misc tree in a little while, I've cc'ed
all the suspects. Once that unblocks I expect a bit larger bunch of
patches to arrive.
Otherwise as I said, one msm revert and two i915 fixes.
msm:
- revert iommu change that broke some platforms.
i915:
- Unset enable_psr2_sel_fetch if PSR2 detection fails
- Fix to detect when VRR is turned off from panel settings"
* tag 'drm-fixes-2022-04-22' of git://anongit.freedesktop.org/drm/drm:
drm/i915/display/psr: Unset enable_psr2_sel_fetch if other checks in intel_psr2_config_valid() fails
drm/msm: Revert "drm/msm: Stop using iommu_present()"
drm/i915/display/vrr: Reset VRR capable property on a long hpd
|
|
In some cases it is possible for mmu_interval_notifier_remove() to race
with mn_tree_inv_end() allowing it to return while the notifier data
structure is still in use. Consider the following sequence:
CPU0 - mn_tree_inv_end() CPU1 - mmu_interval_notifier_remove()
----------------------------------- ------------------------------------
spin_lock(subscriptions->lock);
seq = subscriptions->invalidate_seq;
spin_lock(subscriptions->lock); spin_unlock(subscriptions->lock);
subscriptions->invalidate_seq++;
wait_event(invalidate_seq != seq);
return;
interval_tree_remove(interval_sub); kfree(interval_sub);
spin_unlock(subscriptions->lock);
wake_up_all();
As the wait_event() condition is true it will return immediately. This
can lead to use-after-free type errors if the caller frees the data
structure containing the interval notifier subscription while it is
still on a deferred list. Fix this by taking the appropriate lock when
reading invalidate_seq to ensure proper synchronisation.
I observed this whilst running stress testing during some development.
You do have to be pretty unlucky, but it leads to the usual problems of
use-after-free (memory corruption, kernel crash, difficult to diagnose
WARN_ON, etc).
Link: https://lkml.kernel.org/r/20220420043734.476348-1-apopple@nvidia.com
Fixes: 99cb252f5e68 ("mm/mmu_notifier: add an interval tree notifier")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
vm_insert_page()'s failure is not an unexpected condition, so don't do
WARN_ONCE() in such a case.
Instead, print a kernel message and just return an error code.
This flaw has been reported under an OOM condition by sysbot [1].
The message is mainly for the benefit of the test log, in this case the
fuzzer's log so that humans inspecting the log can figure out what was
going on. KCOV is a testing tool, so I think being a little more chatty
when KCOV unexpectedly is about to fail will save someone debugging
time.
We don't want the WARN, because it's not a kernel bug that syzbot should
report, and failure can happen if the fuzzer tries hard enough (as
above).
Link: https://lkml.kernel.org/r/Ylkr2xrVbhQYwNLf@elver.google.com [1]
Link: https://lkml.kernel.org/r/20220401182512.249282-1-nogikh@google.com
Fixes: b3d7fe86fbd0 ("kcov: properly handle subsequent mmap calls"),
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Taras Madan <tarasmadan@google.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add my email address to KASAN reviewers list to make sure that I am
Cc'ed in all the KASAN changes that may affect arm64 MTE.
Link: https://lkml.kernel.org/r/20220419170640.21404-1-vincenzo.frascino@arm.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The pthread struct is allocated on PRIVATE|ANONYMOUS memory [1] which
can be targeted by the oom reaper. This mapping is used to store the
futex robust list head; the kernel does not keep a copy of the robust
list and instead references a userspace address to maintain the
robustness during a process death.
A race can occur between exit_mm and the oom reaper that allows the oom
reaper to free the memory of the futex robust list before the exit path
has handled the futex death:
CPU1 CPU2
--------------------------------------------------------------------
page_fault
do_exit "signal"
wake_oom_reaper
oom_reaper
oom_reap_task_mm (invalidates mm)
exit_mm
exit_mm_release
futex_exit_release
futex_cleanup
exit_robust_list
get_user (EFAULT- can't access memory)
If the get_user EFAULT's, the kernel will be unable to recover the
waiters on the robust_list, leaving userspace mutexes hung indefinitely.
Delay the OOM reaper, allowing more time for the exit path to perform
the futex cleanup.
Reproducer: https://gitlab.com/jsavitz/oom_futex_reproducer
Based on a patch by Michal Hocko.
Link: https://elixir.bootlin.com/glibc/glibc-2.35/source/nptl/allocatestack.c#L370 [1]
Link: https://lkml.kernel.org/r/20220414144042.677008-1-npache@redhat.com
Fixes: 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Nico Pache <npache@redhat.com>
Co-developed-by: Joel Savitz <jsavitz@redhat.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Herton R. Krzesinski <herton@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Allow the mremap test to be skipped due to errors such as failing to
parse the mmap_min_addr sysctl.
Link: https://lkml.kernel.org/r/20220420215721.4868-4-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use ksft_test_result_xfail for the tests which are expected to fail.
Link: https://lkml.kernel.org/r/20220420215721.4868-3-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Because mremap does not have a MAP_FIXED_NOREPLACE flag, it can destroy
existing mappings. This causes a segfault when regions such as text are
remapped and the permissions are changed.
Verify the requested mremap destination address does not overlap any
existing mappings by using mmap's MAP_FIXED_NOREPLACE flag. Keep
incrementing the destination address until a valid mapping is found or
fail the current test once the max address is reached.
Link: https://lkml.kernel.org/r/20220420215721.4868-2-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
