summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-19btrfs: fix direct I/O writes for split bios on zoned devicesChristoph Hellwig
When a bio is split in btrfs_submit_direct, dip->file_offset contains the file offset for the first bio. But this means the start value used in btrfs_end_dio_bio to record the write location for zone devices is incorrect for subsequent bios. CC: stable@vger.kernel.org # 5.16+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-19btrfs: fix direct I/O read repair for split biosChristoph Hellwig
When a bio is split in btrfs_submit_direct, dip->file_offset contains the file offset for the first bio. But this means the start value used in btrfs_check_read_dio_bio is incorrect for subsequent bios. Add a file_offset field to struct btrfs_bio to pass along the correct offset. Given that check_data_csum only uses start of an error message this means problems with this miscalculation will only show up when I/O fails or checksums mismatch. The logic was removed in f4f39fc5dc30 ("btrfs: remove btrfs_bio::logical member") but we need it due to the bio splitting. CC: stable@vger.kernel.org # 5.16+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-19btrfs: fix and document the zoned device choice in alloc_new_bioChristoph Hellwig
Zone Append bios only need a valid block device in struct bio, but not the device in the btrfs_bio. Use the information from btrfs_zoned_get_device to set up bi_bdev and fix zoned writes on multi-device file system with non-homogeneous capabilities and remove the pointless btrfs_bio.device assignment. Add big fat comments explaining what is going on here. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-19btrfs: fix leaked plug after failure syncing log on zoned filesystemsFilipe Manana
On a zoned filesystem, if we fail to allocate the root node for the log root tree while syncing the log, we end up returning without finishing the IO plug we started before, resulting in leaking resources as we have started writeback for extent buffers of a log tree before. That allocation failure, which typically is either -ENOMEM or -ENOSPC, is not fatal and the fsync can safely fallback to a full transaction commit. So release the IO plug if we fail to allocate the extent buffer for the root of the log root tree when syncing the log on a zoned filesystem. Fixes: 3ddebf27fcd3a9 ("btrfs: zoned: reorder log node allocation on zoned filesystem") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-19netlink: reset network and mac headers in netlink_dump()Eric Dumazet
netlink_dump() is allocating an skb, reserves space in it but forgets to reset network header. This allows a BPF program, invoked later from sk_filter() to access uninitialized kernel memory from the reserved space. Theorically mac header reset could be omitted, because it is set to a special initial value. bpf_internal_load_pointer_neg_helper calls skb_mac_header() without checking skb_mac_header_was_set(). Relying on skb->len not being too big seems fragile. We also could add a sanity check in bpf_internal_load_pointer_neg_helper() to avoid surprises in the future. syzbot report was: BUG: KMSAN: uninit-value in ___bpf_prog_run+0xa22b/0xb420 kernel/bpf/core.c:1637 ___bpf_prog_run+0xa22b/0xb420 kernel/bpf/core.c:1637 __bpf_prog_run32+0x121/0x180 kernel/bpf/core.c:1796 bpf_dispatcher_nop_func include/linux/bpf.h:784 [inline] __bpf_prog_run include/linux/filter.h:626 [inline] bpf_prog_run include/linux/filter.h:633 [inline] __bpf_prog_run_save_cb+0x168/0x580 include/linux/filter.h:756 bpf_prog_run_save_cb include/linux/filter.h:770 [inline] sk_filter_trim_cap+0x3bc/0x8c0 net/core/filter.c:150 sk_filter include/linux/filter.h:905 [inline] netlink_dump+0xe0c/0x16c0 net/netlink/af_netlink.c:2276 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_read_iter+0x5a9/0x630 net/socket.c:1039 do_iter_readv_writev+0xa7f/0xc70 do_iter_read+0x52c/0x14c0 fs/read_write.c:786 vfs_readv fs/read_write.c:906 [inline] do_readv+0x432/0x800 fs/read_write.c:943 __do_sys_readv fs/read_write.c:1034 [inline] __se_sys_readv fs/read_write.c:1031 [inline] __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was stored to memory at: ___bpf_prog_run+0x96c/0xb420 kernel/bpf/core.c:1558 __bpf_prog_run32+0x121/0x180 kernel/bpf/core.c:1796 bpf_dispatcher_nop_func include/linux/bpf.h:784 [inline] __bpf_prog_run include/linux/filter.h:626 [inline] bpf_prog_run include/linux/filter.h:633 [inline] __bpf_prog_run_save_cb+0x168/0x580 include/linux/filter.h:756 bpf_prog_run_save_cb include/linux/filter.h:770 [inline] sk_filter_trim_cap+0x3bc/0x8c0 net/core/filter.c:150 sk_filter include/linux/filter.h:905 [inline] netlink_dump+0xe0c/0x16c0 net/netlink/af_netlink.c:2276 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_read_iter+0x5a9/0x630 net/socket.c:1039 do_iter_readv_writev+0xa7f/0xc70 do_iter_read+0x52c/0x14c0 fs/read_write.c:786 vfs_readv fs/read_write.c:906 [inline] do_readv+0x432/0x800 fs/read_write.c:943 __do_sys_readv fs/read_write.c:1034 [inline] __se_sys_readv fs/read_write.c:1031 [inline] __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3244 [inline] __kmalloc_node_track_caller+0xde3/0x14f0 mm/slub.c:4972 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1158 [inline] netlink_dump+0x30f/0x16c0 net/netlink/af_netlink.c:2242 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_read_iter+0x5a9/0x630 net/socket.c:1039 do_iter_readv_writev+0xa7f/0xc70 do_iter_read+0x52c/0x14c0 fs/read_write.c:786 vfs_readv fs/read_write.c:906 [inline] do_readv+0x432/0x800 fs/read_write.c:943 __do_sys_readv fs/read_write.c:1034 [inline] __se_sys_readv fs/read_write.c:1031 [inline] __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x44/0xae CPU: 0 PID: 3470 Comm: syz-executor751 Not tainted 5.17.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: db65a3aaf29e ("netlink: Trim skb to alloc size to avoid MSG_TRUNC") Fixes: 9063e21fb026 ("netlink: autosize skb lengthes") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220415181442.551228-1-eric.dumazet@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19Merge branch 'rtnetlink-improve-alt_ifname-config-and-fix-dangerous-group-usage'Paolo Abeni
Florent Fourcot says: ==================== rtnetlink: improve ALT_IFNAME config and fix dangerous GROUP usage First commit forbids dangerous calls when both IFNAME and GROUP are given, since it can introduce unexpected behaviour when IFNAME does not match any interface. Second patch achieves primary goal of this patchset to fix/improve IFLA_ALT_IFNAME attribute, since previous code was never working for newlink/setlink. ip-link command is probably getting interface index before, and was not using this feature. Last two patches are improving error code on corner cases. Changes in v2: * Remove ifname argument in rtnl_dev_get/do_setlink functions (simplify code) * Use a boolean to avoid condition duplication in __rtnl_newlink Changes in v3: * Simplify rtnl_dev_get signature Changes in v4: * Rename link_lookup to link_specified Changes in v5: * Re-order patches ==================== Link: https://lore.kernel.org/r/20220415165330.10497-1-florent.fourcot@wifirst.fr Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19rtnetlink: return EINVAL when request cannot succeedFlorent Fourcot
A request without interface name/interface index/interface group cannot work. We should return EINVAL Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Signed-off-by: Brian Baboch <brian.baboch@wifirst.fr> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19rtnetlink: return ENODEV when IFLA_ALT_IFNAME is used in dellinkFlorent Fourcot
If IFLA_ALT_IFNAME is set and given interface is not found, we should return ENODEV and be consistent with IFLA_IFNAME behaviour This commit extends feature of commit 76c9ac0ee878, "net: rtnetlink: add possibility to use alternative names as message handle" CC: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Signed-off-by: Brian Baboch <brian.baboch@wifirst.fr> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19rtnetlink: enable alt_ifname for setlink/newlinkFlorent Fourcot
buffer called "ifname" given in function rtnl_dev_get is always valid when called by setlink/newlink, but contains only empty string when IFLA_IFNAME is not given. So IFLA_ALT_IFNAME is always ignored This patch fixes rtnl_dev_get function with a remove of ifname argument, and move ifname copy in do_setlink when required. It extends feature of commit 76c9ac0ee878, "net: rtnetlink: add possibility to use alternative names as message handle"" CC: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Signed-off-by: Brian Baboch <brian.baboch@wifirst.fr> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19rtnetlink: return ENODEV when ifname does not exist and group is givenFlorent Fourcot
When the interface does not exist, and a group is given, the given parameters are being set to all interfaces of the given group. The given IFNAME/ALT_IF_NAME are being ignored in that case. That can be dangerous since a typo (or a deleted interface) can produce weird side effects for caller: Case 1: IFLA_IFNAME=valid_interface IFLA_GROUP=1 MTU=1234 Case 1 will update MTU and group of the given interface "valid_interface". Case 2: IFLA_IFNAME=doesnotexist IFLA_GROUP=1 MTU=1234 Case 2 will update MTU of all interfaces in group 1. IFLA_IFNAME is ignored in this case This behaviour is not consistent and dangerous. In order to fix this issue, we now return ENODEV when the given IFNAME does not exist. Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Signed-off-by: Brian Baboch <brian.baboch@wifirst.fr> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19ASoC: wm8958: Fix change notifications for DSP controlsMark Brown
The WM8958 DSP controls all return 0 on successful write, not a boolean value indicating if the write changed the value of the control. Fix this by returning 1 after a change, there is already a check at the start of each put() that skips the function in the case that there is no change. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220416125408.197440-1-broonie@kernel.org Cc: stable@vger.kernel.org
2022-04-19Merge branch 'net-sched-allow-user-to-select-txqueue'Paolo Abeni
Tonghao Zhang says: ==================== net: sched: allow user to select txqueue From: Tonghao Zhang <xiangxia.m.yue@gmail.com> Patch 1 allow user to select txqueue in clsact hook. Patch 2 support skbhash to select txqueue. ==================== Link: https://lore.kernel.org/r/20220415164046.26636-1-xiangxia.m.yue@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19net: sched: support hash selecting tx queueTonghao Zhang
This patch allows users to pick queue_mapping, range from A to B. Then we can load balance packets from A to B tx queue. The range is an unsigned 16bit value in decimal format. $ tc filter ... action skbedit queue_mapping skbhash A B "skbedit queue_mapping QUEUE_MAPPING" (from "man 8 tc-skbedit") is enhanced with flags: SKBEDIT_F_TXQ_SKBHASH +----+ +----+ +----+ | P1 | | P2 | | Pn | +----+ +----+ +----+ | | | +-----------+-----------+ | | clsact/skbedit | MQ v +-----------+-----------+ | q0 | qn | qm v v v HTB/FQ FIFO ... FIFO For example: If P1 sends out packets to different Pods on other host, and we want distribute flows from qn - qm. Then we can use skb->hash as hash. setup commands: $ NETDEV=eth0 $ ip netns add n1 $ ip link add ipv1 link $NETDEV type ipvlan mode l2 $ ip link set ipv1 netns n1 $ ip netns exec n1 ifconfig ipv1 2.2.2.100/24 up $ tc qdisc add dev $NETDEV clsact $ tc filter add dev $NETDEV egress protocol ip prio 1 \ flower skip_hw src_ip 2.2.2.100 action skbedit queue_mapping skbhash 2 6 $ tc qdisc add dev $NETDEV handle 1: root mq $ tc qdisc add dev $NETDEV parent 1:1 handle 2: htb $ tc class add dev $NETDEV parent 2: classid 2:1 htb rate 100kbit $ tc class add dev $NETDEV parent 2: classid 2:2 htb rate 200kbit $ tc qdisc add dev $NETDEV parent 1:2 tbf rate 100mbit burst 100mb latency 1 $ tc qdisc add dev $NETDEV parent 1:3 pfifo $ tc qdisc add dev $NETDEV parent 1:4 pfifo $ tc qdisc add dev $NETDEV parent 1:5 pfifo $ tc qdisc add dev $NETDEV parent 1:6 pfifo $ tc qdisc add dev $NETDEV parent 1:7 pfifo $ ip netns exec n1 iperf3 -c 2.2.2.1 -i 1 -t 10 -P 10 pick txqueue from 2 - 6: $ ethtool -S $NETDEV | grep -i tx_queue_[0-9]_bytes tx_queue_0_bytes: 42 tx_queue_1_bytes: 0 tx_queue_2_bytes: 11442586444 tx_queue_3_bytes: 7383615334 tx_queue_4_bytes: 3981365579 tx_queue_5_bytes: 3983235051 tx_queue_6_bytes: 6706236461 tx_queue_7_bytes: 42 tx_queue_8_bytes: 0 tx_queue_9_bytes: 0 txqueues 2 - 6 are mapped to classid 1:3 - 1:7 $ tc -s class show dev $NETDEV ... class mq 1:3 root leaf 8002: Sent 11949133672 bytes 7929798 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:4 root leaf 8003: Sent 7710449050 bytes 5117279 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:5 root leaf 8004: Sent 4157648675 bytes 2758990 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:6 root leaf 8005: Sent 4159632195 bytes 2759990 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:7 root leaf 8006: Sent 7003169603 bytes 4646912 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 ... Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Talal Ahmad <talalahmad@google.com> Cc: Kevin Hao <haokexin@gmail.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Kees Cook <keescook@chromium.org> Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com> Cc: Antoine Tenart <atenart@kernel.org> Cc: Wei Wang <weiwan@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19net: sched: use queue_mapping to pick tx queueTonghao Zhang
This patch fixes issue: * If we install tc filters with act_skbedit in clsact hook. It doesn't work, because netdev_core_pick_tx() overwrites queue_mapping. $ tc filter ... action skbedit queue_mapping 1 And this patch is useful: * We can use FQ + EDT to implement efficient policies. Tx queues are picked by xps, ndo_select_queue of netdev driver, or skb hash in netdev_core_pick_tx(). In fact, the netdev driver, and skb hash are _not_ under control. xps uses the CPUs map to select Tx queues, but we can't figure out which task_struct of pod/containter running on this cpu in most case. We can use clsact filters to classify one pod/container traffic to one Tx queue. Why ? In containter networking environment, there are two kinds of pod/ containter/net-namespace. One kind (e.g. P1, P2), the high throughput is key in these applications. But avoid running out of network resource, the outbound traffic of these pods is limited, using or sharing one dedicated Tx queues assigned HTB/TBF/FQ Qdisc. Other kind of pods (e.g. Pn), the low latency of data access is key. And the traffic is not limited. Pods use or share other dedicated Tx queues assigned FIFO Qdisc. This choice provides two benefits. First, contention on the HTB/FQ Qdisc lock is significantly reduced since fewer CPUs contend for the same queue. More importantly, Qdisc contention can be eliminated completely if each CPU has its own FIFO Qdisc for the second kind of pods. There must be a mechanism in place to support classifying traffic based on pods/container to different Tx queues. Note that clsact is outside of Qdisc while Qdisc can run a classifier to select a sub-queue under the lock. In general recording the decision in the skb seems a little heavy handed. This patch introduces a per-CPU variable, suggested by Eric. The xmit.skip_txqueue flag is firstly cleared in __dev_queue_xmit(). - Tx Qdisc may install that skbedit actions, then xmit.skip_txqueue flag is set in qdisc->enqueue() though tx queue has been selected in netdev_tx_queue_mapping() or netdev_core_pick_tx(). That flag is cleared firstly in __dev_queue_xmit(), is useful: - Avoid picking Tx queue with netdev_tx_queue_mapping() in next netdev in such case: eth0 macvlan - eth0.3 vlan - eth0 ixgbe-phy: For example, eth0, macvlan in pod, which root Qdisc install skbedit queue_mapping, send packets to eth0.3, vlan in host. In __dev_queue_xmit() of eth0.3, clear the flag, does not select tx queue according to skb->queue_mapping because there is no filters in clsact or tx Qdisc of this netdev. Same action taked in eth0, ixgbe in Host. - Avoid picking Tx queue for next packet. If we set xmit.skip_txqueue in tx Qdisc (qdisc->enqueue()), the proper way to clear it is clearing it in __dev_queue_xmit when processing next packets. For performance reasons, use the static key. If user does not config the NET_EGRESS, the patch will not be compiled. +----+ +----+ +----+ | P1 | | P2 | | Pn | +----+ +----+ +----+ | | | +-----------+-----------+ | | clsact/skbedit | MQ v +-----------+-----------+ | q0 | q1 | qn v v v HTB/FQ HTB/FQ ... FIFO Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Talal Ahmad <talalahmad@google.com> Cc: Kevin Hao <haokexin@gmail.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Kees Cook <keescook@chromium.org> Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com> Cc: Antoine Tenart <atenart@kernel.org> Cc: Wei Wang <weiwan@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19x86/cpu: Add new Alderlake and Raptorlake CPU model numbersTony Luck
Intel is subdividing the mobile segment with additional models with the same codename. Using the Intel "N" and "P" suffices for these will be less confusing than trying to map to some different naming convention. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/YlS7n7Xtso9BXZA2@agluck-desk3.sc.intel.com
2022-04-19ipvs: correctly print the memory size of ip_vs_conn_tabPengcheng Yang
The memory size of ip_vs_conn_tab changed after we use hlist instead of list. Fixes: 731109e78415 ("ipvs: use hlist instead of list") Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Acked-by: Julian Anastasov <ja@ssi.bg> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-04-19net: mscc: ocelot: fix broken IP multicast floodingVladimir Oltean
When the user runs: bridge link set dev $br_port mcast_flood on this command should affect not only L2 multicast, but also IPv4 and IPv6 multicast. In the Ocelot switch, unknown multicast gets flooded according to different PGIDs according to its type, and PGID_MC only handles L2 multicast. Therefore, by leaving PGID_MCIPV4 and PGID_MCIPV6 at their default value of 0, unknown IP multicast traffic is never flooded. Fixes: 421741ea5672 ("net: mscc: ocelot: offload bridge port flags to device") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220415151950.219660-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19net: dsa: hellcreek: Calculate checksums in taggerKurt Kanzenbach
In case the checksum calculation is offloaded to the DSA master network interface, it will include the switch trailing tag. As soon as the switch strips that tag on egress, the calculated checksum is wrong. Therefore, add the checksum calculation to the tagger (if required) before adding the switch tag. This way, the hellcreek code works with all DSA master interfaces regardless of their declared feature set. Fixes: 01ef09caad66 ("net: dsa: Add tag handling for Hirschmann Hellcreek switches") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220415103320.90657-1-kurt@linutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19drm/i915/display/vrr: Reset VRR capable property on a long hpdManasi Navare
With some VRR panels, user can turn VRR ON/OFF on the fly from the panel settings. When VRR is turned OFF ,sends a long HPD to the driver clearing the Ignore MSA bit in the DPCD. Currently the driver parses that onevery HPD but fails to reset the corresponding VRR Capable Connector property. Hence the userspace still sees this as VRR Capable panel which is incorrect. Fix this by explicitly resetting the connector property. v2: Reset vrr capable if status == connector_disconnected v3: Use i915 and use bool vrr_capable (Jani Nikula) v4: Move vrr_capable to after update modes call (Jani N) Remove the redundant comment (Jan N) v5: Fixes the regression on older platforms by resetting the VRR only if HAS_VRR v6: Remove the checks from driver, add in drm core before setting VRR prop (Ville) v7: Move VRR set/reset to set/unset_edid (Ville) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: 9bc34b4d0f3c ("drm/i915/display/vrr: Reset VRR capable property on a long hpd") Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220303233222.4698-1-manasi.d.navare@intel.com (cherry picked from commit d999ad1079f574be06a8f1701cd24a5dc0ada48c) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2022-04-19ALSA: usb-audio: add mapping for MSI MAG X570S Torpedo MAX.Maurizio Avogadro
The USB audio device 0db0:a073 based on the Realtek ALC4080 chipset exposes all playback volume controls as "PCM". This makes distinguishing the individual functions hard. The mapping already adopted for device 0db0:419c based on the same chipset fixes the issue, apply it for this device too. Signed-off-by: Maurizio Avogadro <mavoga@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Yl1ykPaGgsFf3SnW@ryzen Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-04-19ALSA: hda/i915: Fix one too many pci_dev_put()Lucas De Marchi
pci_get_class() will already unref the pci device passed as argument. So if it's unconditionally unref'ed, even if the loop is not stopped, there will be one too many unref for each device not matched. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5701 Fixes: c9db8a30d9f0 ("ALSA: hda/i915 - skip acomp init if no matching display") Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20220416064418.2364582-1-lucas.demarchi@intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-04-18selftests/bpf: Refactor prog_tests logging and test executionMykola Lysenko
This is a pre-req to add separate logging for each subtest in test_progs. Move all the mutable test data to the test_result struct. Move per-test init/de-init into the run_one_test function. Consolidate data aggregation and final log output in calculate_and_print_summary function. As a side effect, this patch fixes double counting of errors for subtests and possible duplicate output of subtest log on failures. Also, add prog_tests_framework.c test to verify some of the counting logic. As part of verification, confirmed that number of reported tests is the same before and after the change for both parallel and sequential test execution. Signed-off-by: Mykola Lysenko <mykolal@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220418222507.1726259-1-mykolal@fb.com
2022-04-18scsi: sr: Do not leak information in ioctlTom Rix
sr_ioctl.c uses this pattern: result = sr_do_ioctl(cd, &cgc); to-user = buffer[]; kfree(buffer); return result; Use of a buffer without checking leaks information. Check result and jump over the use of buffer if there is an error. result = sr_do_ioctl(cd, &cgc); if (result) goto err; to-user = buffer[]; err: kfree(buffer); return result; Additionally, initialize the buffer to zero. This problem can be seen in the 2.4.0 kernel. Link: https://lore.kernel.org/r/20220411174756.2418435-1-trix@redhat.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-18ARC: remove redundant READ_ONCE() in cmpxchg loopBang Li
This patch reverts commit 7082a29c22ac ("ARC: use ACCESS_ONCE in cmpxchg loop"). It is not necessary to use READ_ONCE() because cmpxchg contains barrier. We can get it from commit d57f727264f1 ("ARC: add compiler barrier to LLSC based cmpxchg"). Signed-off-by: Bang Li <libang.linuxer@gmail.com> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2022-04-18ARC: atomic: cleanup atomic-llsc definitionsSergey Matyukevich
Remove redundant c_op macro argument. Only asm_op is needed to define atomic operations using llock/scond. Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2022-04-18arc: drop definitions of pgd_index() and pgd_offset{, _k}() entirelyRolf Eike Beer
They were in <asm/pgtables.h> and have been removed from there in 974b9b2c68f ("mm: consolidate pte_index() and pte_offset_*() definitions") in favor of the generic version. But that missed that the same definitons also existed in <asm/pgtable-levels.h>, where they were (inadvertently?) introduced in fe6cb7b043b6 ("ARC: mm: disintegrate pgtable.h into levels and flags"). Fixes: 974b9b2c68f3 ("mm: consolidate pte_index() and pte_offset_*() definitions") Fixes: fe6cb7b043b6 ("ARC: mm: disintegrate pgtable.h into levels and flags") Signed-off-by: Rolf Eike Beer <eb@emlix.com> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2022-04-18ARC: dts: align SPI NOR node name with dtschemaKrzysztof Kozlowski
The node names should be generic and SPI NOR dtschema expects "flash". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2022-04-18ARC: Remove a redundant memset()Christophe JAILLET
disasm_instr() already call memset(0) on its 2nd argument, so there is no need to clear it explicitly before calling this function. Remove the redundant memset(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2022-04-18ARC: fix typos in commentsJulia Lawall
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2022-04-18ARC: entry: fix syscall_trace_exit argumentSergey Matyukevich
Function syscall_trace_exit expects pointer to pt_regs. However r0 is also used to keep syscall return value. Restore pointer to pt_regs before calling syscall_trace_exit. Cc: <stable@vger.kernel.org> Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2022-04-18cifs: Use kzalloc instead of kmalloc/memsetHaowen Bai
Use kzalloc rather than duplicating its implementation, which makes code simple and easy to understand. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-04-18hwmon: (f71882fg) Fix negative temperatureJi-Ze Hong (Peter Hong)
All temperature of Fintek superio hwmonitor that using 1-byte reg will use 2's complement. In show_temp() temp = data->temp[nr] * 1000; When data->temp[nr] read as 255, it indicate -1C, but this code will report 255C to userspace. It'll be ok when change to: temp = ((s8)data->temp[nr]) * 1000; Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Link: https://lore.kernel.org/r/20220418090706.6339-1-hpeter+linux_kernel@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-04-18net: atlantic: invert deep par in pm functions, preventing null derefsManuel Ullmann
This will reset deeply on freeze and thaw instead of suspend and resume and prevent null pointer dereferences of the uninitialized ring 0 buffer while thawing. The impact is an indefinitely hanging kernel. You can't switch consoles after this and the only possible user interaction is SysRq. BUG: kernel NULL pointer dereference RIP: 0010:aq_ring_rx_fill+0xcf/0x210 [atlantic] aq_vec_init+0x85/0xe0 [atlantic] aq_nic_init+0xf7/0x1d0 [atlantic] atl_resume_common+0x4f/0x100 [atlantic] pci_pm_thaw+0x42/0xa0 resolves in aq_ring.o to ``` 0000000000000ae0 <aq_ring_rx_fill>: { /* ... */ baf: 48 8b 43 08 mov 0x8(%rbx),%rax buff->flags = 0U; /* buff is NULL */ ``` The bug has been present since the introduction of the new pm code in 8aaa112a57c1 ("net: atlantic: refactoring pm logic") and was hidden until 8ce84271697a ("net: atlantic: changes for multi-TC support"), which refactored the aq_vec_{free,alloc} functions into aq_vec_{,ring}_{free,alloc}, but is technically not wrong. The original functions just always reinitialized the buffers on S3/S4. If the interface is down before freezing, the bug does not occur. It does not matter, whether the initrd contains and loads the module before thawing. So the fix is to invert the boolean parameter deep in all pm function calls, which was clearly intended to be set like that. First report was on Github [1], which you have to guess from the resume logs in the posted dmesg snippet. Recently I posted one on Bugzilla [2], since I did not have an AQC device so far. #regzbot introduced: 8ce84271697a #regzbot from: koo5 <kolman.jindrich@gmail.com> #regzbot monitor: https://github.com/Aquantia/AQtion/issues/32 Fixes: 8aaa112a57c1 ("net: atlantic: refactoring pm logic") Link: https://github.com/Aquantia/AQtion/issues/32 [1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=215798 [2] Cc: stable@vger.kernel.org Reported-by: koo5 <kolman.jindrich@gmail.com> Signed-off-by: Manuel Ullmann <labre@posteo.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18docs: net: dsa: describe issues with checksum offloadLuiz Angelo Daros de Luca
DSA tags before IP header (categories 1 and 2) or after the payload (3) might introduce offload checksum issues. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18Merge branch 'mlxsw-line-card'David S. Miller
Ido Schimmel says: ==================== mlxsw: Introduce line card support for modular switch Jiri says: This patchset introduces support for modular switch systems and also introduces mlxsw support for NVIDIA Mellanox SN4800 modular switch. It contains 8 slots to accommodate line cards - replaceable PHY modules which may contain gearboxes. Currently supported line card: 16X 100GbE (QSFP28) Other line cards that are going to be supported: 8X 200GbE (QSFP56) 4X 400GbE (QSFP-DD) There may be other types of line cards added in the future. To be consistent with the port split configuration (splitter cabels), the line card entities are treated in the similar way. The nature of a line card is not "a pluggable device", but "a pluggable PHY module". A concept of "provisioning" is introduced. The user may "provision" certain slot with a line card type. Driver then creates all instances (devlink ports, netdevices, etc) related to this line card type. It does not matter if the line card is plugged-in at the time. User is able to configure netdevices, devlink ports, setup port splitters, etc. From the perspective of the switch ASIC, all is present and can be configured. The carrier of netdevices stays down if the line card is not plugged-in. Once the line card is inserted and activated, the carrier of the related netdevices is then reflecting the physical line state, same as for an ordinary fixed port. Once user does not want to use the line card related instances anymore, he can "unprovision" the slot. Driver then removes the instances. Patches 1-4 are extending devlink driver API and UAPI in order to register, show, dump, provision and activate the line card. Patches 5-17 are implementing the introduced API in mlxsw. The last patch adds a selftest for mlxsw line cards. Example: $ devlink port # No ports are listed $ devlink lc pci/0000:01:00.0: lc 1 state unprovisioned supported_types: 16x100G lc 2 state unprovisioned supported_types: 16x100G lc 3 state unprovisioned supported_types: 16x100G lc 4 state unprovisioned supported_types: 16x100G lc 5 state unprovisioned supported_types: 16x100G lc 6 state unprovisioned supported_types: 16x100G lc 7 state unprovisioned supported_types: 16x100G lc 8 state unprovisioned supported_types: 16x100G Note that driver exposes list supported line card types. Currently there is only one: "16x100G". To provision the slot #8: $ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G $ devlink lc show pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 state active type 16x100G supported_types: 16x100G $ devlink port pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4 pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4 pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4 pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4 pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4 pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4 pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4 pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4 pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4 pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4 pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4 pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4 pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4 pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4 pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4 pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4 To uprovision the slot #8: $ devlink lc set pci/0000:01:00.0 lc 8 notype ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18selftests: mlxsw: Introduce devlink line card ↵Jiri Pirko
provision/unprovision/activation tests Introduce basic line card manipulation which consists of provisioning, unprovisioning and activation of a line card. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18mlxsw: spectrum: Add port to linecard mappingJiri Pirko
For each port get slot_index using PMLP register. For ports residing on a linecard, identify it with the linecard by setting mapping using devlink_port_linecard_set() helper. Use linecard slot index for PMTDB register queries. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18mlxsw: core: Extend driver ops by remove selected ports opJiri Pirko
In case of line card implementation, the core has to have a way to remove relevant ports manually. Extend the Spectrum driver ops by an op that implements port removal of selected ports upon request. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18mlxsw: core_linecards: Implement line card activation processJiri Pirko
Allow to process events generated upon line card getting "ready" and "active". When DSDSC event with "ready" bit set is delivered, that means the line card is powered up. Use MDDC register to push the line card to active state. Once FW is done with that, the DSDSC event with "active" bit set is delivered. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18mlxsw: core_linecards: Add line card objects and implement provisioningJiri Pirko
Introduce objects for line cards and an infrastructure around that. Use devlink_linecard_create/destroy() to register the line card with devlink core. Implement provisioning ops with a list of supported line cards. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18mlxsw: reg: Add Management Binary Code Transfer RegisterJiri Pirko
The MBCT register allows to transfer binary INI codes from the host to the management FW by transferring it by chunks of maximum 1KB. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18mlxsw: reg: Add Management DownStream Device Control RegisterJiri Pirko
The MDDC register allows to control downstream devices and line cards. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18mlxsw: reg: Add Management DownStream Device Query RegisterJiri Pirko
The MDDQ register allows to query the DownStream device properties. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18mlxsw: spectrum: Introduce port mapping change event processingJiri Pirko
Register PMLPE trap and process the port mapping changes delivered by it by creating related ports. Note that this happens after provisioning. The INI of the linecard is processed and merged by FW. PMLPE is generated for each port. Process this mapping change. Layout of PMLPE is the same as layout of PMLP. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18mlxsw: Narrow the critical section of devl_lock during ports creation/removalJiri Pirko
No need to hold the lock for alloc and freecpu. So narrow the critical section. Follow-up patch is going to benefit from this by adding more code to the functions which will be out of the critical as well. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18mlxsw: reg: Add Ports Mapping Event Configuration RegisterJiri Pirko
The PMECR register is used to enable/disable event triggering in case of local port mapping change. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18mlxsw: spectrum: Allocate port mapping array of structs instead of pointersJiri Pirko
Instead of array of pointers to port mapping structures, allocate the array of structures directly. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18mlxsw: spectrum: Allow lane to start from non-zero indexJiri Pirko
So far, the lane index always started from zero. That is not true for modular systems with gearbox-equipped linecards. Loose the check so the lanes can start from non-zero index. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18devlink: add port to line card relationship setJiri Pirko
In order to properly inform user about relationship between port and line card, introduce a driver API to set line card for a port. Use this information to extend port devlink netlink message by line card index and also include the line card index into phys_port_name and by that into a netdevice name. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18devlink: implement line card active stateJiri Pirko
Allow driver to mark a line card as active. Expose this state to the userspace over devlink netlink interface with proper notifications. 'active' state means that line card was plugged in after being provisioned. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-23 20:53:32 +0000