summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-04RDMA/rxe: Change mcg_lock to a _bh lockBob Pearson
rxe_mcast.c currently uses _irqsave spinlocks for rxe->mcg_lock while rxe_recv.c uses _bh spinlocks for the same lock. As there is no case where the mcg_lock can be taken from an IRQ, change these all to bh locks so we don't have confusing mismatched lock types on the same spinlock. Fixes: 6090a0c4c7c6 ("RDMA/rxe: Cleanup rxe_mcast.c") Link: https://lore.kernel.org/r/20220504202817.98247-1-rpearsonhpe@gmail.com Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-05-04RDMA/rxe: Do not call dev_mc_add/del() under a spinlockBob Pearson
These routines were not intended to be called under a spinlock and will throw debugging warnings: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 13 PID: 3107 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x2f/0x50 CPU: 13 PID: 3107 Comm: python3 Tainted: G E 5.18.0-rc1+ #7 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:warn_bogus_irq_restore+0x2f/0x50 Call Trace: <TASK> _raw_spin_unlock_irqrestore+0x75/0x80 rxe_attach_mcast+0x304/0x480 [rdma_rxe] ib_attach_mcast+0x88/0xa0 [ib_core] ib_uverbs_attach_mcast+0x186/0x1e0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xcd/0x140 [ib_uverbs] ib_uverbs_cmd_verbs+0xdb0/0xea0 [ib_uverbs] ib_uverbs_ioctl+0xd2/0x160 [ib_uverbs] do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Move them out of the spinlock, it is OK if there is some races setting up the MC reception at the ethernet layer with rbtree lookups. Fixes: 6090a0c4c7c6 ("RDMA/rxe: Cleanup rxe_mcast.c") Link: https://lore.kernel.org/r/20220504202817.98247-1-rpearsonhpe@gmail.com Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-05-04RDMA/siw: Fix a condition race issue in MPA request processingCheng Xu
The calling of siw_cm_upcall and detaching new_cep with its listen_cep should be atomistic semantics. Otherwise siw_reject may be called in a temporary state, e,g, siw_cm_upcall is called but the new_cep->listen_cep has not being cleared. This fixes a WARN: WARNING: CPU: 7 PID: 201 at drivers/infiniband/sw/siw/siw_cm.c:255 siw_cep_put+0x125/0x130 [siw] CPU: 2 PID: 201 Comm: kworker/u16:22 Kdump: loaded Tainted: G E 5.17.0-rc7 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: iw_cm_wq cm_work_handler [iw_cm] RIP: 0010:siw_cep_put+0x125/0x130 [siw] Call Trace: <TASK> siw_reject+0xac/0x180 [siw] iw_cm_reject+0x68/0xc0 [iw_cm] cm_work_handler+0x59d/0xe20 [iw_cm] process_one_work+0x1e2/0x3b0 worker_thread+0x50/0x3a0 ? rescuer_thread+0x390/0x390 kthread+0xe5/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: 6c52fdc244b5 ("rdma/siw: connection management") Link: https://lore.kernel.org/r/d528d83466c44687f3872eadcb8c184528b2e2d4.1650526554.git.chengyou@linux.alibaba.com Reported-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-05-04dt-bindings: pci: apple,pcie: Drop max-link-speed from exampleHector Martin
We no longer use these since 111659c2a570 (and they never worked anyway); drop them from the example to avoid confusion. Fixes: 111659c2a570 ("arm64: dts: apple: t8103: Remove PCIe max-link-speed properties") Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220502091308.28233-1-marcan@marcan.st
2022-05-04dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemasRob Herring
Another round of removing redundant minItems/maxItems when 'items' list is specified. This time it is in if/then schemas as the meta-schema was failing to check this case. If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems. Signed-off-by: Rob Herring <robh@kernel.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Link: https://lore.kernel.org/r/20220503162738.3827041-1-robh@kernel.org
2022-05-04dt-bindings: pinctrl: Allow values for drive-push-pull and drive-open-drainRob Herring
A few platforms, at91 and tegra, use drive-push-pull and drive-open-drain with a 0 or 1 value. There's not really a need for values as '1' should be equivalent to no value (it wasn't treated that way) and drive-push-pull disabled is equivalent to drive-open-drain. So dropping the value can't be done without breaking existing OSs. As we don't want new cases, mark the case with values as deprecated. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220429194610.2741437-1-robh@kernel.org
2022-05-04MAINTAINERS: Update Josh Poimboeuf's email addressJosh Poimboeuf
Change to my kernel.org email address. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/1abc3de4b00dc6f915ac975a2ec29ed545d96dc4.1651687652.git.jpoimboe@redhat.com
2022-05-04Merge tag 'iomm-fixes-v5.18-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "IOMMU core: - Fix for a regression which could cause NULL-ptr dereferences Arm SMMU: - Fix off-by-one in SMMUv3 SVA TLB invalidation - Disable large mappings to workaround nvidia erratum Intel VT-d: - Handle PCI stop marker messages in IOMMU driver to meet the requirement of I/O page fault handling framework. - Calculate a feasible mask for non-aligned page-selective IOTLB invalidation. Apple DART IOMMU: - Fix potential NULL-ptr dereference - Set module owner" * tag 'iomm-fixes-v5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: Make sysfs robust for non-API groups iommu/dart: Add missing module owner to ops structure iommu/dart: check return value after calling platform_get_resource() iommu/vt-d: Drop stop marker messages iommu/vt-d: Calculate mask for non-aligned flushes iommu: arm-smmu: disable large page mappings for Nvidia arm-smmu iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()
2022-05-04Merge tag 'for-linus-5.17-2' of https://github.com/cminyard/linux-ipmiLinus Torvalds
Pull IPMI fixes from Corey Minyard: "Fix some issues that were reported. This has been in for-next for a bit (longer than the times would indicate, I had to rebase to add some text to the headers) and these are fixes that need to go in" * tag 'for-linus-5.17-2' of https://github.com/cminyard/linux-ipmi: ipmi:ipmi_ipmb: Fix null-ptr-deref in ipmi_unregister_smi() ipmi: When handling send message responses, don't process the message
2022-05-04drm/amd/display: Avoid reading audio pattern past AUDIO_CHANNELS_COUNTHarry Wentland
A faulty receiver might report an erroneous channel count. We should guard against reading beyond AUDIO_CHANNELS_COUNT as that would overflow the dpcd_pattern_period array. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-05-04drm/amdgpu: do not use passthrough mode in Xen dom0Marek Marczykowski-Górecki
While technically Xen dom0 is a virtual machine too, it does have access to most of the hardware so it doesn't need to be considered a "passthrough". Commit b818a5d37454 ("drm/amdgpu/gmc: use PCI BARs for APUs in passthrough") changed how FB is accessed based on passthrough mode. This breaks amdgpu in Xen dom0 with message like this: [drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3 While the reason for this failure is unclear, the passthrough mode is not really necessary in Xen dom0 anyway. So, to unbreak booting affected kernels, disable passthrough mode in this case. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1985 Fixes: b818a5d37454 ("drm/amdgpu/gmc: use PCI BARs for APUs in passthrough") Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-05-04iommu: Make sysfs robust for non-API groupsRobin Murphy
Groups created by VFIO backends outside the core IOMMU API should never be passed directly into the API itself, however they still expose their standard sysfs attributes, so we can still stumble across them that way. Take care to consider those cases before jumping into our normal assumptions of a fully-initialised core API group. Fixes: 3f6634d997db ("iommu: Use right way to retrieve iommu_ops") Reported-by: Jan Stancek <jstancek@redhat.com> Tested-by: Jan Stancek <jstancek@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/86ada41986988511a8424e84746dfe9ba7f87573.1651667683.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04powerpc/vdso: Fix incorrect CFI in gettimeofday.SMichael Ellerman
As reported by Alan, the CFI (Call Frame Information) in the VDSO time routines is incorrect since commit ce7d8056e38b ("powerpc/vdso: Prepare for switching VDSO to generic C implementation."). DWARF has a concept called the CFA (Canonical Frame Address), which on powerpc is calculated as an offset from the stack pointer (r1). That means when the stack pointer is changed there must be a corresponding CFI directive to update the calculation of the CFA. The current code is missing those directives for the changes to r1, which prevents gdb from being able to generate a backtrace from inside VDSO functions, eg: Breakpoint 1, 0x00007ffff7f804dc in __kernel_clock_gettime () (gdb) bt #0 0x00007ffff7f804dc in __kernel_clock_gettime () #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 #2 0x00007fffffffd960 in ?? () #3 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 Backtrace stopped: frame did not save the PC Alan helpfully describes some rules for correctly maintaining the CFI information: 1) Every adjustment to the current frame address reg (ie. r1) must be described, and exactly at the instruction where r1 changes. Why? Because stack unwinding might want to access previous frames. 2) If a function changes LR or any non-volatile register, the save location for those regs must be given. The CFI can be at any instruction after the saves up to the point that the reg is changed. (Exception: LR save should be described before a bl. not after) 3) If asychronous unwind info is needed then restores of LR and non-volatile regs must also be described. The CFI can be at any instruction after the reg is restored up to the point where the save location is (potentially) trashed. Fix the inability to backtrace by adding CFI directives describing the changes to r1, ie. satisfying rule 1. Also change the information for LR to point to the copy saved on the stack, not the value in r0 that will be overwritten by the function call. Finally, add CFI directives describing the save/restore of r2. With the fix gdb can correctly back trace and navigate up and down the stack: Breakpoint 1, 0x00007ffff7f804dc in __kernel_clock_gettime () (gdb) bt #0 0x00007ffff7f804dc in __kernel_clock_gettime () #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 #2 0x0000000100015b60 in gettime () #3 0x000000010000c8bc in print_long_format () #4 0x000000010000d180 in print_current_files () #5 0x00000001000054ac in main () (gdb) up #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 (gdb) #2 0x0000000100015b60 in gettime () (gdb) #3 0x000000010000c8bc in print_long_format () (gdb) #4 0x000000010000d180 in print_current_files () (gdb) #5 0x00000001000054ac in main () (gdb) Initial frame selected; you cannot go up. (gdb) down #4 0x000000010000d180 in print_current_files () (gdb) #3 0x000000010000c8bc in print_long_format () (gdb) #2 0x0000000100015b60 in gettime () (gdb) #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 (gdb) #0 0x00007ffff7f804dc in __kernel_clock_gettime () (gdb) Fixes: ce7d8056e38b ("powerpc/vdso: Prepare for switching VDSO to generic C implementation.") Cc: stable@vger.kernel.org # v5.11+ Reported-by: Alan Modra <amodra@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Link: https://lore.kernel.org/r/20220502125010.1319370-1-mpe@ellerman.id.au
2022-05-04powerpc/pseries/vas: Use QoS credits from the userspaceHaren Myneni
The user can change the QoS credits dynamically with the management console interface which notifies OS with sysfs. After returning from the OS interface successfully, the management console updates the hypervisor. Since the VAS capabilities in the hypervisor is not updated when the OS gets the update, the kernel is using the old total credits value from the hypervisor. Fix this issue by using the new QoS credits from the userspace instead of depending on VAS capabilities from the hypervisor. Signed-off-by: Haren Myneni <haren@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/76d156f8af1e03cc09369d68e0bfad0c40031bcc.camel@linux.ibm.com
2022-05-04mmc: sdhci-msm: Reset GCC_SDCC_BCR register for SDHCShaik Sajida Bhanu
Reset GCC_SDCC_BCR register before every fresh initilazation. This will reset whole SDHC-msm controller, clears the previous power control states and avoids, software reset timeout issues as below. [ 5.458061][ T262] mmc1: Reset 0x1 never completed. [ 5.462454][ T262] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 5.469065][ T262] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00007202 [ 5.475688][ T262] mmc1: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [ 5.482315][ T262] mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [ 5.488927][ T262] mmc1: sdhci: Present: 0x01f800f0 | Host ctl: 0x00000000 [ 5.495539][ T262] mmc1: sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [ 5.502162][ T262] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00000003 [ 5.508768][ T262] mmc1: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 [ 5.515381][ T262] mmc1: sdhci: Int enab: 0x00000000 | Sig enab: 0x00000000 [ 5.521996][ T262] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 [ 5.528607][ T262] mmc1: sdhci: Caps: 0x362dc8b2 | Caps_1: 0x0000808f [ 5.535227][ T262] mmc1: sdhci: Cmd: 0x00000000 | Max curr: 0x00000000 [ 5.541841][ T262] mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 [ 5.548454][ T262] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 [ 5.555079][ T262] mmc1: sdhci: Host ctl2: 0x00000000 [ 5.559651][ T262] mmc1: sdhci_msm: ----------- VENDOR REGISTER DUMP----------- [ 5.566621][ T262] mmc1: sdhci_msm: DLL sts: 0x00000000 | DLL cfg: 0x6000642c | DLL cfg2: 0x0020a000 [ 5.575465][ T262] mmc1: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl: 0x00010800 | DDR cfg: 0x80040873 [ 5.584658][ T262] mmc1: sdhci_msm: Vndr func: 0x00018a9c | Vndr func2 : 0xf88218a8 Vndr func3: 0x02626040 Fixes: 0eb0d9f4de34 ("mmc: sdhci-msm: Initial support for Qualcomm chipsets") Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Konrad Dybcio <konrad.dybcio@somainline.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1650816153-23797-1-git-send-email-quic_c_sbhanu@quicinc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-05-04Merge branch 'mlxsw-updates'David S. Miller
Ido Schimmel says: ==================== mlxsw: Various updates Patches #1-#3 add missing topology diagrams in selftests and perform small cleanups. Patches #4-#5 make small adjustments in QoS configuration. See detailed description in the commit messages. Patches #6-#8 reduce the number of background EMAD transactions. The driver periodically queries the device (via EMAD transactions) about updates that cannot happen in certain situations. This can negatively impact the latency of time critical transactions, as the device is busy processing other transactions. Before: # perf stat -a -e devlink:devlink_hwmsg -- sleep 10 Performance counter stats for 'system wide': 452 devlink:devlink_hwmsg 10.009736160 seconds time elapsed After: # perf stat -a -e devlink:devlink_hwmsg -- sleep 10 Performance counter stats for 'system wide': 0 devlink:devlink_hwmsg 10.001726333 seconds time elapsed ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04mlxsw: spectrum_router: Only query neighbour activity when necessaryIdo Schimmel
The driver periodically queries the device for activity of neighbour entries in order to report it to the kernel's neighbour table. Avoid unnecessary activity query when no neighbours are installed. Use an atomic variable to track the number of neighbours, as it is read without any locks. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04mlxsw: spectrum_switchdev: Only query FDB notifications when necessaryIdo Schimmel
The driver periodically queries the device for FDB notifications (e.g., learned, aged-out) in order to update the bridge driver. These notifications can only be generated when bridges are offloaded to the device. Avoid unnecessary queries by starting to query upon installation of the first bridge and stop querying upon removal of the last bridge. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04mlxsw: spectrum_acl: Do not report activity for multicast routesIdo Schimmel
The driver periodically queries the device for activity of ACL rules in order to report it to tc upon 'FLOW_CLS_STATS'. In Spectrum-2 and later ASICs, multicast routes are programmed as ACL rules, but unlike rules installed by tc, their activity is of no interest. Avoid unnecessary activity query for such rules by always reporting them as inactive. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04mlxsw: Treat LLDP packets as controlPetr Machata
When trapping packets for on-CPU processing, Spectrum machines differentiate between control and non-control traps. Traffic trapped through non-control traps is treated as data and kept in shared buffer in pools 0-4. Traffic trapped through control traps is kept in the dedicated control buffer 9. The advantage of marking traps as control is that pressure in the data plane does not prevent the control traffic to be processed. When the LLDP trap was introduced, it was marked as a control trap. But then in commit aed4b5721143 ("mlxsw: spectrum: PTP: Hook into packet receive path"), PTP traps were introduced. Because Ethernet-encapsulated PTP packets look to the Spectrum-1 ASIC as LLDP traffic and are trapped under the LLDP trap, this trap was reconfigured as non-control, in sync with the PTP traps. There is however no requirement that PTP traffic be handled as data. Besides, the usual encapsulation for PTP traffic is UDP, not bare Ethernet, and that is in deployments that even need PTP, which is far less common than LLDP. This is reflected by the default policer, which was not bumped up to the 19Kpps / 24Kpps that is the expected load of a PTP-enabled Spectrum-1 switch. Marking of LLDP trap as non-control was therefore probably misguided. In this patch, change it back to control. Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04mlxsw: spectrum_dcb: Do not warn about priority changesPetr Machata
The idea behind the warnings is that the user would get warned in case when more than one priority is configured for a given DSCP value on a netdevice. The warning is currently wrong, because dcb_ieee_getapp_mask() returns the first matching entry, not all of them, and the warning will then claim that some priority is "current", when in fact it is not. But more importantly, the warning is misleading in general. Consider the following commands: # dcb app flush dev swp19 dscp-prio # dcb app add dev swp19 dscp-prio 24:3 # dcb app replace dev swp19 dscp-prio 24:2 The last command will issue the following warning: mlxsw_spectrum3 0000:07:00.0 swp19: Ignoring new priority 2 for DSCP 24 in favor of current value of 3 The reason is that the "replace" command works by first adding the new value, and then removing all old values. This is the only way to make the replacement without causing the traffic to be prioritized to whatever the chip defaults to. The warning is issued in response to adding the new priority, and then no warning is shown when the old priority is removed. The upshot is that the canonical way to change traffic prioritization always produces a warning about ignoring the new priority, but what gets configured is in fact what the user intended. An option to just emit warning every time that the prioritization changes just to make it clear that it happened is obviously unsatisfactory. Therefore, in this patch, remove the warnings. Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04selftests: router.sh: Add a diagramPetr Machata
It is customary for selftests to have a comment with a topology diagram, which serves to illustrate the situation in which the test is done. This selftest lacks it. Add it. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04selftests: router_vid_1: Add a diagram, fix coding stylePetr Machata
It is customary for selftests to have a comment with a topology diagram, which serves to illustrate the situation in which the test is done. This selftest lacks it. Add it. While at it, fix the list of tests so that the test names are enumerated one at a line. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04selftests: mlxsw: bail_on_lldpad before installing the cleanup trapPetr Machata
A number of mlxsw-specific QoS tests use manual QoS DCB management. As such, they need to make sure lldpad is not running, because it would override the configuration the test has applied using other tools. To that end, these selftests invoke the bail_on_lldpad() helper, which terminates the selftest if th lldpad is running. Some of these tests however first install the bash exit trap, which invokes a cleanup() at the test exit. If bail_on_lldpad() has terminated the script even before the setup part was run, the cleanup part will be very confused. Therefore make sure bail_on_lldpad() is invoked before the cleanup is registered. While there are still edge cases where the user terminates the script before the setup was fully done, this takes care of a common situation where the cleanup would be invoked in an inconsistent state. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04Merge branch 'sfc-Siena-subdir'David S. Miller
Martin Habets says: ==================== sfc: Move Siena into a separate subdirectory The Siena NICs (SFN5000 and SFN6000 series) went EOL in November 2021. Most of these adapters have been remove from our test labs, and testing has been reduced to a minimum. This patch series creates a separate kernel module for the Siena architecture, analogous to what was done for Falcon some years ago. This reduces our maintenance for the sfc.ko module, and allows us to enhance the EF10 and EF100 drivers without the risk of breaking Siena NICs. After this series further enhancements are needed to differentiate the new kernel module from sfc.ko, and the Siena code can be removed from sfc.ko. Thes will be posted as a small follow-up series. The Siena module is not built by default, but can be enabled using Kconfig option SFC_SIENA. This will create module sfc-siena.ko. Patches Patch 1 disables the Siena code in the sfc.ko module. Patches 2-6 establish the code base for the Siena driver. Patches 7-12 ensure the allyesconfig build succeeds. Patch 13 adds the basic Siena module. I do not expect patch 2 through 5 to be reviewed, they are FYI only. No checkpatch issues were resolved as part of these, but they were fixed in the subsequent patches. Testing Various build tests were done such as allyesconfig, W=1 and sparse. The new sfc-siena.ko and sfc.ko modules were tested on a machine with both these NICs in them, and several tests were run on both drivers. Martin --- v3: - Fix build errors after rebase. v2: - Split up patch that copies existing files. - Only copy a subset of mcdi_pcol.h. - Use --find-copies-harder as suggested by Benjamin Poirier. - Merge several patches for the allyesconfig build into larger ones. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04sfc: Copy a subset of mcdi_pcol.h to sienaMartin Habets
For Siena we do not need new messages that were defined for the EF100 architecture. Several debug messages have also been removed. Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04sfc: Disable Siena supportMartin Habets
Disable the build of Siena code until later in this patch series. Prevent sfc.ko from binding to Siena NICs. efx_init_sriov/efx_fini_sriov is only used for Siena. Remove calls to those. Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04Merge tag 'mlx5-updates-2022-05-03' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux mlx5-updates-2022-05-03 Leon Romanovsky Says: ===================== Extra IPsec cleanup After FPGA IPsec removal, we can go further and make sure that flow steering logic is aligned to mlx5_core standard together with deep cleaning of whole IPsec path. ===================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04Merge tag 'mlx5-fixes-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/gDavid S. Miller
it/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2022-05-03 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04mmc: sunxi-mmc: Fix DMA descriptors allocated above 32 bitsSamuel Holland
Newer variants of the MMC controller support a 34-bit physical address space by using word addresses instead of byte addresses. However, the code truncates the DMA descriptor address to 32 bits before applying the shift. This breaks DMA for descriptors allocated above the 32-bit limit. Fixes: 3536b82e5853 ("mmc: sunxi: add support for A100 mmc controller") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220424231751.32053-1-samuel@sholland.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-05-04Merge branch 'mptcp-pathmanager-api'David S. Miller
Mat Martineau says: ==================== mptcp: Userspace path manager API Userspace path managers (PMs) make use of generic netlink MPTCP events and commands to control addition and removal of MPTCP subflows on an existing MPTCP connection. The path manager events have already been upstream for a while, and this patch series adds four netlink commands for userspace: * MPTCP_PM_CMD_ANNOUNCE: advertise an address that's available for additional subflow connections. * MPTCP_PM_CMD_REMOVE: revoke an advertisement * MPTCP_PM_CMD_SUBFLOW_CREATE: initiate a new subflow on an existing MPTCP connection * MPTCP_PM_CMD_SUBFLOW_DESTROY: close a subflow on an existing MPTCP connection Userspace path managers, such as mptcpd, can be more easily customized for different devices. The in-kernel path manager remains available to handle server use cases. Patches 1-3 update common path manager code (used by both in-kernel and userspace PMs) Patches 4, 6, and 8 implement the new generic netlink commands. Patches 5, 7, and 9-13 add self test support and test cases for the new path manager commands. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04selftests: mptcp: functional tests for the userspace PM typeKishen Maloor
This change adds a selftest script that performs a comprehensive behavioral/functional test of all userspace PM capabilities by exercising all the newly added APIs and changes to support said capabilities. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04selftests: mptcp: create listeners to receive MPJsKishen Maloor
This change updates the "pm_nl_ctl" testing sample with a "listen" option to bind a MPTCP listening socket to the provided addr+port. This option is exercised in testing subflow initiation scenarios in conjunction with userspace path managers where the MPTCP application does not hold an active listener to accept requests for new subflows. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04selftests: mptcp: capture netlink eventsKishen Maloor
This change adds to self-testing support for the MPTCP netlink interface by capturing various MPTCP netlink events (and all their metadata) associated with connections, subflows and address announcements. It is used in self-testing scripts that exercise MPTCP netlink commands to precisely validate those operations by examining the dispatched MPTCP netlink events in response to those commands. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_DESTROYKishen Maloor
This change updates the "pm_nl_ctl" testing sample with a "dsf" (destroy subflow) option to support the newly added netlink interface command MPTCP_PM_CMD_SUBFLOW_DESTROY over the chosen MPTCP connection. E.g. ./pm_nl_ctl dsf lip 10.0.2.1 lport 44567 rip 10.0.2.2 rport 56789 token 823274047 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_CREATEKishen Maloor
This change updates the "pm_nl_ctl" testing sample with a "csf" (create subflow) option to support the newly added netlink interface command MPTCP_PM_CMD_SUBFLOW_CREATE over the chosen MPTCP connection. E.g. ./pm_nl_ctl csf lip 10.0.2.1 lid 23 rip 10.0.2.2 rport 56789 token 823274047 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04mptcp: netlink: allow userspace-driven subflow establishmentFlorian Westphal
This allows userspace to tell kernel to add a new subflow to an existing mptcp connection. Userspace provides the token to identify the mptcp-level connection that needs a change in active subflows and the local and remote addresses of the new or the to-be-removed subflow. MPTCP_PM_CMD_SUBFLOW_CREATE requires the following parameters: { token, { loc_id, family, loc_addr4 | loc_addr6 }, { family, rem_addr4 | rem_addr6, rem_port } MPTCP_PM_CMD_SUBFLOW_DESTROY requires the following parameters: { token, { family, loc_addr4 | loc_addr6, loc_port }, { family, rem_addr4 | rem_addr6, rem_port } Acked-by: Paolo Abeni <pabeni@redhat.com> Co-developed-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04selftests: mptcp: support MPTCP_PM_CMD_REMOVEKishen Maloor
This change updates the "pm_nl_ctl" testing sample with a "rem" (remove) option to support the newly added netlink interface command MPTCP_PM_CMD_REMOVE to issue a REMOVE_ADDR signal over the chosen MPTCP connection. E.g. ./pm_nl_ctl rem token 823274047 id 23 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04mptcp: netlink: Add MPTCP_PM_CMD_REMOVEKishen Maloor
This change adds a MPTCP netlink command for issuing a REMOVE_ADDR signal for an address over the chosen MPTCP connection from a userspace path manager. The command requires the following parameters: {token, loc_id}. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04selftests: mptcp: support MPTCP_PM_CMD_ANNOUNCEKishen Maloor
This change updates the "pm_nl_ctl" testing sample with an "ann" (announce) option to support the newly added netlink interface command MPTCP_PM_CMD_ANNOUNCE to issue ADD_ADDR advertisements over the chosen MPTCP connection. E.g. ./pm_nl_ctl ann 192.168.122.75 token 823274047 id 25 dev enp1s0 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04mptcp: netlink: Add MPTCP_PM_CMD_ANNOUNCEKishen Maloor
This change adds a MPTCP netlink interface for issuing ADD_ADDR advertisements over the chosen MPTCP connection from a userspace path manager. The command requires the following parameters: { token, { loc_id, family, daddr4 | daddr6 [, dport] } [, if_idx], flags[signal] }. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04mptcp: netlink: split mptcp_pm_parse_addr into two functionsFlorian Westphal
Next patch will need to parse MPTCP_PM_ATTR_ADDR attributes and fill an mptcp_addr_info structure from a different genl command callback. To avoid copy-paste, split the existing function to a helper that does the common part and then call the helper from the (renamed)mptcp_pm_parse_entry function. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04mptcp: read attributes of addr entries managed by userspace PMsKishen Maloor
This change introduces a parallel path in the kernel for retrieving the local id, flags, if_index for an addr entry in the context of an MPTCP connection that's being managed by a userspace PM. The userspace and in-kernel PM modes deviate in their procedures for obtaining this information. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04mptcp: handle local addrs announced by userspace PMsKishen Maloor
This change adds an internal function to store/retrieve local addrs announced by userspace PM implementations to/from its kernel context. The function addresses the requirements of three scenarios: 1) ADD_ADDR announcements (which require that a local id be provided), 2) retrieving the local id associated with an address, and also where one may need to be assigned, and 3) reissuance of ADD_ADDRs when there's a successful match of addr/id. The list of all stored local addr entries is held under the MPTCP sock structure. Memory for these entries is allocated from the sock option buffer, so the list of addrs is bounded by optmem_max. The list if not released via REMOVE_ADDR signals is ultimately freed when the sock is destructed. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04mac80211: Reset MBSSID parameters upon connectionManikanta Pubbisetty
Currently MBSSID parameters in struct ieee80211_bss_conf are not reset upon connection. This could be problematic with some drivers in a scenario where the device first connects to a non-transmit BSS and then connects to a transmit BSS of a Multi BSS AP. The MBSSID parameters which are set after connecting to a non-transmit BSS will not be reset and the same parameters will be passed on to the driver during the subsequent connection to a transmit BSS of a Multi BSS AP. For example, firmware running on the ath11k device uses the Multi BSS data for tracking the beacon of a non-transmit BSS and reports the driver when there is a beacon miss. If we do not reset the MBSSID parameters during the subsequent connection to a transmit BSS, then the driver would have wrong MBSSID data and FW would be looking for an incorrect BSSID in the MBSSID beacon of a Multi BSS AP and reports beacon loss leading to an unstable connection. Reset the MBSSID parameters upon every connection to solve this problem. Fixes: 78ac51f81532 ("mac80211: support multi-bssid") Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Link: https://lore.kernel.org/r/20220428052744.27040-1-quic_mpubbise@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-04cfg80211: retrieve S1G operating channel numberKieran Frewen
When retrieving the S1G channel number from IEs, we should retrieve the operating channel instead of the primary channel. The S1G operation element specifies the main channel of operation as the oper channel, unlike for HT and HE which specify their main channel of operation as the primary channel. Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com> Signed-off-by: Bassem Dawood <bassem@morsemicro.com> Link: https://lore.kernel.org/r/20220420041321.3788789-1-kieran.frewen@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-04nl80211: validate S1G channel widthKieran Frewen
Validate the S1G channel width input by user to ensure it matches that of the requested channel Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com> Signed-off-by: Bassem Dawood <bassem@morsemicro.com> Link: https://lore.kernel.org/r/20220420041321.3788789-2-kieran.frewen@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-04mac80211: fix rx reordering with non explicit / psmp ack policyFelix Fietkau
When the QoS ack policy was set to non explicit / psmp ack, frames are treated as not being part of a BA session, which causes extra latency on reordering. Fix this by only bypassing reordering for packets with no-ack policy Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20220420105038.36443-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-04iommu/dart: Add missing module owner to ops structureHector Martin
This is required to make loading this as a module work. Signed-off-by: Hector Martin <marcan@marcan.st> Fixes: 46d1fb072e76 ("iommu/dart: Add DART iommu driver") Reviewed-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20220502092238.30486-1-marcan@marcan.st Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04drm/bridge: ite-it6505: add missing Kconfig option selectFabien Parent
The IT6505 is using functions provided by the DRM_DP_HELPER driver. In order to avoid having the bridge enabled but the helper disabled, let's add a select in order to be sure that the DP helper functions are always available. Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver") Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220426141536.274727-1-fparent@baylibre.com
generated by cgit (git 2.34.1) at 2025-09-11 21:15:20 +0000