summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-12-09dm thin metadata: fix bug when taking a metadata snapshotJoe Thornber
When you take a metadata snapshot the btree roots for the mapping and details tree need to have their reference counts incremented so they persist for the lifetime of the metadata snap. The roots being incremented were those currently written in the superblock, which could possibly be out of date if concurrent IO is triggering new mappings, breaking of sharing, etc. Fix this by performing a commit with the metadata lock held while taking a metadata snapshot. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2015-12-09Merge tag 'fixes-for-v4.4-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for-v4.4-rc5 Hopefully final set of fixes for v4.4 release cycle. There's a fix for a regression on dwc3 caused by recent changes to how transfers are started. We're not pre-starting interrupt endpoints anymore. A NULL pointer dereference fix for the MSM phy driver. The UVC gadget got a minor fix for permissions to its configfs attributes and, finally, two fixes for MUSB. A fix for PM runtime when MUSB returns EPROBE_DEFER and a fix to actually return an error in case we can't initialize a DMA engine. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "A couple of fixes, both -stable fodder (9p one all way back to 2.6.32, dio - to all branches where "Fix negative return from dio read beyond eof" will end up it; it's a fixup to commit marked for -stable)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix the regression from "direct-io: Fix negative return from dio read beyond eof" 9p: ->evict_inode() should kick out ->i_data, not ->i_mapping
2015-12-09Merge tag 'pci-v4.4-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These are more fixes I'd like to have in v4.4. Several for the Altera driver added for v4.4, and one for an MSI domain problem that affects several arm64 platforms: MSI: - Only use the generic MSI layer when domain is hierarchical (Marc Zyngier) Altera host bridge driver: - Fix loop in tlp_read_packet() (Dan Carpenter) - Fix Requester ID for config accesses (Ley Foon Tan) - Check TLP completion status (Ley Foon Tan) - Fix error when INTx is 4 (Ley Foon Tan)" * tag 'pci-v4.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: altera: Fix error when INTx is 4 PCI: altera: Check TLP completion status PCI: altera: Fix Requester ID for config accesses PCI: altera: Fix loop in tlp_read_packet() PCI/MSI: Only use the generic MSI layer when domain is hierarchical
2015-12-09perf tools: Move cmd_version() to builtin-version.cJosh Poimboeuf
Move cmd_version() to its own file so that help.c can be moved to a library. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/e908b1b68f20ab6d8d33941d5571c23110622e60.1449548395.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09perf tools: Save cmdline arguments earlierJosh Poimboeuf
perf_env__set_cmdline() only saves the arguments the first time it's called. It doesn't need to be called every time the options and suboptions are parsed. Instead it can just be called once. This also has the advantage of making the option parsing code less perf-specific so it can be moved out to a library. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/19b76a5aa1b688bd635bd65d80bbc103a978d75e.1449548395.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09perf tools: Move term functions out of util.cJosh Poimboeuf
The term functions are needed by help.c which is going to be moved into a separate library. Move them out of util.c and into their own file. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/9a39c854dd156b55ebda57e427594c9a59dcb40f.1449548395.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09perf tools: Remove unused pager_use_color variableJosh Poimboeuf
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/e540c61b3068761181db6d9b1b3411990bafdb2f.1449548395.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09perf tools: Fix write_numa_topology to put cpu_map instead of freeMasami Hiramatsu
Fix write_numa_topology to put cpu_map instead of free because cpu_map is managed based on refcnt. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151209021135.10245.79046.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09perf machine: Fix machine.vmlinux_maps to make sure to clear the old oneMasami Hiramatsu
Fix machine.vmlinux_maps to make sure to clear the old one if it is renewal. This can leak the previous maps on the vmlinux_maps because those are just overwritten. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151209021133.10245.93730.stgit@localhost.localdomain [ Simplified the memset, same end result ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09perf tools: Fix maps__fixup_overlappings to put used mapsMasami Hiramatsu
Since the __map_groups__insert got the given map, we don't need to keep it. So put the maps. Refcnt debugger shows that map_groups__fixup_overlappings() got a map twice but the group released it just once. This pattern usually indicates the leak happens in caller site. ---- ==== [0] ==== Unreclaimed map@0x39d3ae0 Refcount +1 => 1 at ./perf(map_groups__fixup_overlappings+0x335) [0x4c1865] ./perf(thread__insert_map+0x30) [0x4c8e00] ./perf(machine__process_mmap2_event+0x106) [0x4bd876] ./perf() [0x4c378e] ./perf() [0x4c4393] ./perf(perf_session__process_events+0x38a) [0x4c654a] ./perf(cmd_record+0xe24) [0x42fc94] ./perf() [0x47b745] ./perf(main+0x617) [0x422547] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f2eca2deaf5] ./perf() [0x4226bd] Refcount +1 => 2 at ./perf(map_groups__fixup_overlappings+0x3c5) [0x4c18f5] ./perf(thread__insert_map+0x30) [0x4c8e00] ./perf(machine__process_mmap2_event+0x106) [0x4bd876] ./perf() [0x4c378e] ./perf() [0x4c4393] ./perf(perf_session__process_events+0x38a) [0x4c654a] ./perf(cmd_record+0xe24) [0x42fc94] ./perf() [0x47b745] ./perf(main+0x617) [0x422547] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f2eca2deaf5] ./perf() [0x4226bd] Refcount -1 => 1 at ./perf(map_groups__exit+0x92) [0x4c0962] ./perf(map_groups__put+0x60) [0x4c0bc0] ./perf(thread__put+0x90) [0x4c8a40] ./perf(machine__delete_threads+0x7e) [0x4bad9e] ./perf(perf_session__delete+0x4f) [0x4c499f] ./perf(cmd_record+0xb6d) [0x42f9dd] ./perf() [0x47b745] ./perf(main+0x617) [0x422547] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f2eca2deaf5] ./perf() [0x4226bd] ---- Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151209021131.10245.41485.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09perf hists: Fix hists_evsel to release histsMasami Hiramatsu
Since hists__init doesn't set the destructor of hists_evsel (which is an extended evsel structure), when hists_evsel is released, the extended part of the hists_evsel is not deleted (note that the hists_evsel object itself is freed). This fixes it to add a destructor for hists__evsel and to set it up. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151209021129.10245.28710.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09perf stat: Fix cmd_stat to release cpu_mapMasami Hiramatsu
Fix cmd_stat() to release cpu_map objects (aggr_map and cpus_aggr_map) afterwards. refcnt debugger shows that the cmd_stat initializes cpu_map but not puts it. ---- # ./perf stat -v ls .... REFCNT: BUG: Unreclaimed objects found. ==== [0] ==== Unreclaimed cpu_map@0x29339c0 Refcount +1 => 1 at ./perf(cpu_map__empty_new+0x6d) [0x4e64bd] ./perf(cmd_stat+0x5fe) [0x43594e] ./perf() [0x47b785] ./perf(main+0x617) [0x422587] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f2dff420af5] ./perf() [0x4226fd] REFCNT: Total 1 objects are not reclaimed. "cpu_map" leaks 1 objects ---- Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151209021127.10245.93697.stgit@localhost.localdomain [ Remove NULL checks before calling the put operation, it checks it already ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09perf tools: Fix map_groups__clone to put cloned mapMasami Hiramatsu
Fix map_groups__clone to put cloned map after inserting it to the map_groups. Refcnt debugger shows: ---- ==== [0] ==== Unreclaimed map: 0x2a27ee0 Refcount +1 => 1 at ./perf(map_groups__clone+0x8d) [0x4bb7ed] ./perf(thread__fork+0xbe) [0x4c1f9e] ./perf(machine__process_fork_event+0x216) [0x4b79a6] ./perf(perf_event__synthesize_threads+0x38b) [0x48135b] ./perf(cmd_top+0xdc6) [0x43cb76] ./perf() [0x477223] ./perf(main+0x617) [0x422077] /lib64/libc.so.6(__libc_start_main+0xf0) [0x7ff806af8fe0] ./perf() [0x4221ed] Refcount +1 => 2 at ./perf(map_groups__clone+0x128) [0x4bb888] ./perf(thread__fork+0xbe) [0x4c1f9e] ./perf(machine__process_fork_event+0x216) [0x4b79a6] ./perf(perf_event__synthesize_threads+0x38b) [0x48135b] ./perf(cmd_top+0xdc6) [0x43cb76] ./perf() [0x477223] ./perf(main+0x617) [0x422077] /lib64/libc.so.6(__libc_start_main+0xf0) [0x7ff806af8fe0] ./perf() [0x4221ed] Refcount -1 => 1 at ./perf(map_groups__exit+0x87) [0x4ba757] ./perf(map_groups__put+0x68) [0x4ba9a8] ./perf(thread__put+0x8b) [0x4c1aeb] ./perf(machine__delete_threads+0x81) [0x4b48f1] ./perf(perf_session__delete+0x4f) [0x4be63f] ./perf(cmd_top+0x1094) [0x43ce44] ./perf() [0x477223] ./perf(main+0x617) [0x422077] /lib64/libc.so.6(__libc_start_main+0xf0) [0x7ff806af8fe0] ./perf() [0x4221ed] ---- This shows map_groups__clone get the map twice and put it when map_groups__exit. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151209021120.10245.95388.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09perf tui: Change default selection background color to yellowIngo Molnar
Boris reported that 'perf top' is unusable on his default 'black on white' terminal, which uses (eye friendly) light-grey as a background color. The reason is that the TUI cursor for the current selection line uses HE_COLORSET_SELECTED, and that has a default background color of 'lightgrey' - which is a common terminal background choice and thus the colors conflict. Use yellow as the background color instead: that should be an uncommon terminal background, yet it's still ergonomic on both black and white/grey terminals. [ It would be a better solution to straight out detect color collisions and resolve them reasonably by converting them to RGB and calculating color space distances, but I was unable to find proper documentation for SLtt_get_color_object() to recover the current color scheme so I gave up ... Yellow works well enough. ] Reported-and-Tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Binderman <dcb314@hotmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150305103213.GA23046@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09ALSA: hda/ca0132 - quirk for Alienware 17 2015Gabriele Martino
The Alienware 17 (2015) has the same card and pin configuration of the Alienware 15, so the same quirks must be applied. Signed-off-by: Gabriele Martino <g.martino@gmx.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-09usb: musb: fail with error when no DMA controller setAaro Koskinen
Fail with error when no DMA controller is set. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-09of/irq: move of_msi_map_rid declaration to the correct ifdef sectionRob Herring
In checking fixes for of_irq_find_parent declaration location, I found that of_msi_map_rid is also wrong. of_msi_map_rid is not implemented for Sparc, so it should not be in the Sparc specific section of the header. Move it to just depend on OF_IRQ. Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2015-12-09of/irq: Export of_irq_find_parent againCarlo Caione
of_irq_find_parent was made static since it had no users outside of of_irq.c. Export it again since we are going to use it again. Signed-off-by: Carlo Caione <carlo@endlessm.com> [robh: move of_irq_find_parent to correct ifdef section] Signed-off-by: Rob Herring <robh@kernel.org>
2015-12-09ALSA: hda - Fix noise problems on Thinkpad T440sTakashi Iwai
Lenovo Thinkpad T440s suffers from constant background noises, and it seems to be a generic hardware issue on this model: https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/T440s-speaker-noise/td-p/1339883 As the noise comes from the analog loopback path, disabling the path is the easy workaround. Also, the machine gives significant cracking noises at PM suspend. A workaround found by trial-and-error is to disable the shutup callback currently used for ALC269-variant. This patch addresses these noise issues by introducing a new fixup chain. Although the same workaround might be applicable to other Thinkpad models, it's applied only to T440s (17aa:220c) in this patch, so far, just to be safe (you chicken!). As a compromise, a new model option string "tp440" is provided now, though, so that owners of other Thinkpad models can test it more easily. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=958504 Reported-and-tested-by: Tim Hardeck <thardeck@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-09netfilter: nfnetlink_queue: Unregister pernet subsys in case of init failureNikolay Borisov
Commit 3bfe049807c2403 ("netfilter: nfnetlink_{log,queue}: Register pernet in first place") reorganised the initialisation order of the pernet_subsys to avoid "use-before-initialised" condition. However, in doing so the cleanup logic in nfnetlink_queue got botched in that the pernet_subsys wasn't cleaned in case nfnetlink_subsys_register failed. This patch adds the necessary cleanup routine call. Fixes: 3bfe049807c2403 ("netfilter: nfnetlink_{log,queue}: Register pernet in first place") Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-12-09crypto: skcipher - Copy iv from desc even for 0-len walksJason A. Donenfeld
Some ciphers actually support encrypting zero length plaintexts. For example, many AEAD modes support this. The resulting ciphertext for those winds up being only the authentication tag, which is a result of the key, the iv, the additional data, and the fact that the plaintext had zero length. The blkcipher constructors won't copy the IV to the right place, however, when using a zero length input, resulting in some significant problems when ciphers call their initialization routines, only to find that the ->iv parameter is uninitialized. One such example of this would be using chacha20poly1305 with a zero length input, which then calls chacha20, which calls the key setup routine, which eventually OOPSes due to the uninitialized ->iv member. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-12-09OMAPDSS: fix timings for VENC to match what omapdrm expectsH. Nikolaus Schaller
Otherwise check_timings fails and we get a "has no modes" message from xrandr. This fix makes the venc assume PAL and NTSC timings that match the timings synthetized by copy_timings_drm_to_omap() from omapdrm mode settings so that check_timings() succeeds. Tested on: BeagleBoard XM, GTA04 and OpenPandora Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-09video: fbdev: fsl: Fix kernel crash when diu_ops is not implementedWang Dongsheng
If diu_ops is not implemented on platform, kernel will access a NULL pointer. We need to check this pointer in DIU initialization. Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Acked-by: Timur Tabi <timur@tabi.org> Cc: stable@vger.kernel.org Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-09i2c: imx: init bus recovery info before adding i2c adapterGao Pan
During driver probe, i2c_imx_init_recovery_info() must come before i2c_add_numbered_adapter(), because the get/set_scl() functions are assigned in i2c_register_adapter() under the conditon that bus recover_info are initialized. Otherwise, get/set_scl() function pointers never get assigned. In such case, when i2c_generic_gpio_recovery() is used for bus recovery, there will be kernel crash because bri->set_scl is NULL. The solution to this bug is moving i2c_imx_init_recovery_info() before i2c_register_adapter(). Signed-off-by: Gao Pan <b54642@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2015-12-09radeon: Fix VCE IB test on Big-Endian systemsOded Gabbay
This patch makes the VCE IB test pass on Big-Endian systems. It converts to little-endian the contents of the VCE message. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-12-09radeon: Fix VCE ring test for Big-Endian systemsOded Gabbay
This patch fixes the VCE ring test when running on Big-Endian machines. Every write to the ring needs to be translated to little-endian. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-12-09radeon/cik: Fix GFX IB test on Big-EndianOded Gabbay
This patch makes the IB test on the GFX ring pass for CI-based cards installed in Big-Endian machines. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-12-09drm/amdgpu: fix the lost duplicates checkingChunming Zhou
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com> Cc: stable@vger.kernel.org
2015-12-09Merge tag 'vmwgfx-fixes-4.4-151208' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-fixes Pull request of 2015-12-08 A couple of fixes for vmwgfx. A WARN() fix by Dan Carpenter, a TTM read/write lock imbalance causing occasional hangs with Wayland and an implementation of cursor_set2 to fix incorrectly offset Wayland cursors. * tag 'vmwgfx-fixes-4.4-151208' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Implement the cursor_set2 callback v2 drm/vmwgfx: fix a warning message drm/ttm: Fixed a read/write lock imbalance
2015-12-09Merge branch 'linux-4.4' of https://github.com/skeggsb/linux into drm-fixesDave Airlie
Just the one commit I mentioned earlier, making the PGOB workaround the default. * 'linux-4.4' of https://github.com/skeggsb/linux: drm/nouveau/pmu: remove whitelist for PGOB-exit WAR, enable by default
2015-12-08net: ezchip: fix address space confusion in nps_enet.cArnd Bergmann
The nps_enet driver happily mixes virtual, physical and __iomem addresses, which are all different depending on the architecture and configuration. That causes a warning when building the code on ARM with LPAE mode enabled: drivers/net/ethernet/ezchip/nps_enet.c: In function 'nps_enet_send_frame': drivers/net/ethernet/ezchip/nps_enet.c:370:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] but will also fail to work for other reasons. In this patch, I'm trying to change the code to use only normal kernel pointers, which I assume is what the author actually meant: * For reading or writing a 32-bit word that may be unaligned when an SKB contains unaligned data, I'm using get_unaligned/put_unaligned() rather than memcpy_fromio/toio. * For converting a u8 pointer to a u32 pointer, I use a cast rather than the incorrect virt_to_phys. * For copying a couple of bytes from one place to another while respecting alignment, I use memcpy instead of memcpy_toio. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-08net: fsl: avoid 64-bit warning on pq_mdioArnd Bergmann
The pq_mdio driver can now be built for ARM64, where we get a format string warning: drivers/net/ethernet/freescale/fsl_pq_mdio.c: In function 'fsl_pq_mdio_probe': drivers/net/ethernet/freescale/fsl_pq_mdio.c:467:25: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'long int' [-Wformat=] The argument is an implicit ptrdiff_t from the subtraction of two pointers, so we should use the %z format string modifier to make this work on 64-bit architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: fe761bcb9046 ("net: fsl: expands dependencies of NET_VENDOR_FREESCALE") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-08r8152: fix lockup when runtime PM is enabledPeter Wu
When an interface is brought up which was previously suspended (via runtime PM), it would hang. This happens because napi_disable is called before napi_enable. Solve this by avoiding napi_enable in the resume during open function (netif_running is true when open is called, IFF_UP is set after a successful open; netif_running is false when close is called, but IFF_UP is then still set). While at it, remove WORK_ENABLE check from rtl8152_open (introduced with the original change) because it cannot happen: - After this patch, runtime resume will not set it during rtl8152_open. - When link is up, rtl8152_open is not called. - When link is down during system/auto suspend/resume, it is not set. Fixes: 41cec84cf285 ("r8152: don't enable napi before rx ready") Link: https://lkml.kernel.org/r/20151205105912.GA1766@al Signed-off-by: Peter Wu <peter@lekensteyn.nl> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-08net: thunderx: Correctly distinguish between VF and LMAC countPavel Fedin
Commit bc69fdfc6c13 ("net: thunderx: Enable BGX LMAC's RX/TX only after VF is up") introduces lmac_cnt member and starts verifying VF number against it. This is plain wrong, and works only because currently we have hardcoded 1:1 mapping between VFs and LMACs, and in this case num_vf_en and lmac_cnt are always equal. However in future this may change, and the code will badly misbehave. The worst consequence of this is failure to deliver link status messages, causing VFs to go defunct because since commit 0b72a9a1060e ("net: thunderx: Switchon carrier only upon interface link up") VF will not fully bring itself up without it. This patch fixes the potential problem by doing VF number checks against the num_vf_en. Since lmac_cnt is not used anywhere else, it is removed. Additionally some duplicated code is factored out into nic_enable_vf() Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-08teach nfs_get_link() to work in RCU modeAl Viro
based upon the corresponding patch from Neil's March patchset, again with kmap-related horrors removed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-08teach proc_self_get_link()/proc_thread_self_get_link() to work in RCU modeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-08teach shmem_get_link() to work in RCU modeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-08teach page_get_link() to work in RCU modeAl Viro
more or less along the lines of Neil's patchset, sans the insanity around kmap(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-08replace ->follow_link() with new method that could stay in RCU modeAl Viro
new method: ->get_link(); replacement of ->follow_link(). The differences are: * inode and dentry are passed separately * might be called both in RCU and non-RCU mode; the former is indicated by passing it a NULL dentry. * when called that way it isn't allowed to block and should return ERR_PTR(-ECHILD) if it needs to be called in non-RCU mode. It's a flagday change - the old method is gone, all in-tree instances converted. Conversion isn't hard; said that, so far very few instances do not immediately bail out when called in RCU mode. That'll change in the next commits. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-08don't put symlink bodies in pagecache into highmemAl Viro
kmap() in page_follow_link_light() needed to go - allowing to hold an arbitrary number of kmaps for long is a great way to deadlocking the system. new helper (inode_nohighmem(inode)) needs to be used for pagecache symlinks inodes; done for all in-tree cases. page_follow_link_light() instrumented to yell about anything missed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-08geneve: Fix IPv6 xmit stats update.Pravin B Shelar
Call to iptunnel_xmit_stats() is not required after udp-tunnel6-xmit. By calling iptunnel_xmit_stats() results in incorrect device stats. Following patch drops this call. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-09Revert "powerpc/eeh: Don't unfreeze PHB PE after reset"Andrew Donnellan
This reverts commit 527d10ef3a315d3cb9dc098dacd61889a6c26439. The reverted commit breaks cxlflash devices following an EEH reset (and possibly other cxl devices, however this has not been tested). The reverted commit changed the behaviour of eeh_reset_device() so that PHB PEs are not unfrozen following the completion of the reset. This should not be problematic, as no device resources should have been associated with the PHB PE. However, when attempting to load the cxlflash driver after a reset, the driver attempts to read Vital Product Data through a call to pci_read_vpd() (which is called on the physical cxl device, not on the virtual AFU device). pci_read_vpd() in turn attempts to read from the cxl device's config space. This fails, as the PE it's trying to read from is still frozen. In turn, the driver gets an -ENODEV and fails to initialise. It appears this issue only affects some parts of the VPD area, as "lspci -vvv", which only reads a subset of the VPD bytes, is not broken by the original patch. At this stage, we don't fully understand why we're trying to read a frozen PE, and we don't know how this affects other cxl devices. It is possible that there is an underlying bug in the cxl driver or the powerpc CAPI support code, or alternatively a bug in the PCI resource allocation/mapping code that is incorrectly mapping resources to PE#0. As such, this fix is incomplete, however it is necessary to prevent a serious regression in CAPI support. In the meantime, revert the commit, especially as it was intended to be a non-functional change. Cc: Gavin Shan <gwshan@linux.vnet.ibm.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Daniel Axtens <dja@axtens.net> Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-09powerpc/sbc8641: drop bogus PHY IRQ entries from DTS filePaul Gortmaker
This file was originally cloned off of the MPC8641D-HPCN reference platform, which actually had a PHY IRQ line connected. However this board does not. The bogus entry was largely inert and went undetected until commit 321beec5047af83db90c88114b7e664b156f49fe ("net: phy: Use interrupts when available in NOLINK state") was added to the tree. With the above commit, the board fails to NFS boot since it sits waiting for a PHY IRQ event that of course never arrives. Removing the bogus entries from the DTS file fixes the issue. Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-08Merge branch 'for-linus-4.4-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull uml fixes from Richard Weinberger: "This contains various bug fixes, most of them are fall out from the merge window" * 'for-linus-4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: fix returns without va_end um: Fix fpstate handling arch: um: fix error when linking vmlinux. um: Fix get_signal() usage
2015-12-08doc: dt: mtd: partitions: add compatible property to "partitions" nodeBrian Norris
As noted here [1], there are potentially future conflicts if we try to use MTD's "partitions" subnode to describe anything besides just the fixed-in-the-device-tree partitions currently described in this document. Particularly, there was a proposal to use this node for the AFS parser too. It can pose a (small) problem to try to differentiate the following nodes: // using binding as currently specified partitions { #address-cells = <x>; #size-cells = <y>; partition@0 { ...; }; }; and // proposed future binding partitions { compatible = "arm,arm-flash-structure"; }; It's especially difficult if other uses of this node start having subnodes. So, since the "partitions" node is new in v4.4, let's fixup the binding before release so that it requires a compatible property, so it's much clearer to distinguish. e.g.: // proposed partitions { compatible = "fixed-partitions"; #address-cells = <x>; #size-cells = <y>; partition@0 { ...; }; }; [1] Subject: "mtd: create a partition type device tree binding" http://lkml.kernel.org/g/20151113220039.GA74382@google.com http://lists.infradead.org/pipermail/linux-mtd/2015-November/063355.html http://lists.infradead.org/pipermail/linux-mtd/2015-November/063364.html Cc: Michal Suchanek <hramrach@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Rob Herring <robh@kernel.org>
2015-12-09drm/nouveau/pmu: remove whitelist for PGOB-exit WAR, enable by defaultBen Skeggs
NVIDIA have indicated that the workaround is required on all GK10[467] boards that have the PGOB fuse set. I've left the commandline option in place for now, as paranoia. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2015-12-08IB/mlx5: Postpone remove_keys under knowledge of coming preemptionLeon Romanovsky
The remove_keys() logic is performed as garbage collection task. Such task is intended to be run when no other active processes are running. The need_resched() will return TRUE if there are user tasks to be activated in near future. In such case, we don't execute remove_keys() and postpone the garbage collection work to try to run in next cycle, in order to free CPU resources to other tasks. The possible pseudo-code to trigger such scenario: 1. Allocate a lot of MR to fill the cache above the limit. 2. Wait a small amount of time "to calm" the system. 3. Start CPU extensive operations on multi-node cluster. 4. Expect performance degradation during MR cache shrink operation. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-08IB/mlx4: Use vmalloc for WR buffers when neededWengang Wang
There are several hits that WR buffer allocation(kmalloc) failed. It failed at order 3 and/or 4 contigous pages allocation. At the same time there are actually 100MB+ free memory but well fragmented. So try vmalloc when kmalloc failed. Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-08IB/mlx4: Use correct order of variables in log messageWengang Wang
There is a mis-order in mlx4 log. Fix it. Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-16 19:20:46 +0000