| Age | Commit message (Collapse) | Author |
|---|
|
The padlen member of struct esp_data is always zero. Get rid of it.
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
time_after_eq() only works if the delta is < MAX_ULONG/2.
For a 32bit Dom0, if netfront sends packets at a very low rate, the time
between subsequent calls to tx_credit_exceeded() may exceed MAX_ULONG/2
and the test for timer_after_eq() will be incorrect. Credit will not be
replenished and the guest may become unable to send packets (e.g., if
prior to the long gap, all credit was exhausted).
Use jiffies_64 variant to mitigate this problem for 32bit Dom0.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jason Luan <jianhai.luan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
drivers/net/vxlan.c: In function ‘vxlan_sock_add’:
drivers/net/vxlan.c:2298:11: warning: ‘sock’ may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/net/vxlan.c:2275:17: note: ‘sock’ was declared here
LD drivers/net/built-in.o
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
UFO as well as UDP_CORK do not respect IP_PMTUDISC_DO and
IP_PMTUDISC_PROBE well enough.
UFO enabled packet delivery just appends all frags to the cork and hands
it over to the network card. So we just deliver non-DF udp fragments
(DF-flag may get overwritten by hardware or virtual UFO enabled
interface).
UDP_CORK does enqueue the data until the cork is disengaged. At this
point it sets the correct IP_DF and local_df flags and hands it over to
ip_fragment which in this case will generate an icmp error which gets
appended to the error socket queue. This is not reflected in the syscall
error (of course, if UFO is enabled this also won't happen).
Improve this by checking the pmtudisc flags before appending data to the
socket and if we still can fit all data in one packet when IP_PMTUDISC_DO
or IP_PMTUDISC_PROBE is set, only then proceed.
We use (mtu-fragheaderlen) to check for the maximum length because we
ensure not to generate a fragment and non-fragmented data does not need
to have its length aligned on 64 bit boundaries. Also the passed in
ip_options are already aligned correctly.
Maybe, we can relax some other checks around ip_fragment. This needs
more research.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The length calculation here is now invalid on 32-bit architectures,
since sk_buff::tail is a pointer and sk_buff::transport_header is
an integer offset:
drivers/net/ethernet/chelsio/cxgb3/sge.c: In function 'write_ofld_wr':
drivers/net/ethernet/chelsio/cxgb3/sge.c:1603:9: warning: passing argument 4 of 'make_sgl' makes integer from pointer without a cast [enabled by default]
adap->pdev);
^
drivers/net/ethernet/chelsio/cxgb3/sge.c:964:28: note: expected 'unsigned int' but argument is of type 'sk_buff_data_t'
static inline unsigned int make_sgl(const struct sk_buff *skb,
^
Use the appropriate skb accessor functions.
Compile-tested only.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 1a37e412a022 ('net: Use 16bits for *_headers fields of struct skbuff')
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the bnx2x driver is rmmoded, if VFs of a given PF will be assigned
to a VM then that PF will be unable to call `pci_disable_sriov()'.
If for that same PF there would also exist unassigned VFs in the hypervisor,
the result will be that after the removal there will still be virtual PCI
functions on the hypervisor.
If the bnx2x module were to be re-inserted, the result will be that the VFs
on the hypervisor will be re-probed directly following the PF's probe, even
though that in regular loading flow sriov is only enabled once PF is loaded.
The probed VF will then try to access its bar, causing a PCI error as the HW
is not in a state enabling such a request.
This patch adds a missing disablement procedure to the PF's removal, one that
sets registers viewable to the VF to indicate that the VFs have no permission
to access the bar, thus resulting in probe errors instead of PCI errors.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Buffers for FW statistics were allocated at an inappropriate time; In a machine
where the driver encounters problems allocating all of its queues, the driver
would still create FW requests for the statistics of the non-existing queues.
The wrong order of memory allocation could lead to zeroed statistics messages
being sent, leading to fw assert in case function 0 was down.
This changes the order of allocations, guaranteeing that statistic requests will
only be generated for actual queues.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit 6ff50cd55545 ("tcp: gso: do not generate out of order packets")
had an heuristic that can trigger a warning in skb_try_coalesce(),
because skb->truesize of the gso segments were exactly set to mss.
This breaks the requirement that
skb->truesize >= skb->len + truesizeof(struct sk_buff);
It can trivially be reproduced by :
ifconfig lo mtu 1500
ethtool -K lo tso off
netperf
As the skbs are looped into the TCP networking stack, skb_try_coalesce()
warns us of these skb under-estimating their truesize.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The virtio_net driver's mergeable receive buffer allocator
uses 4KB packet buffers. For MTU-sized traffic, SKB truesize
is > 4KB but only ~1500 bytes of the buffer is used to store
packet data, reducing the effective TCP window size
substantially. This patch addresses the performance concerns
with mergeable receive buffers by allocating MTU-sized packet
buffers using page frag allocators. If more than MAX_SKB_FRAGS
buffers are needed, the SKB frag_list is used.
Signed-off-by: Michael Dalton <mwdalton@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 9863c28a2af90a56c088f5f6288d7f6d2c923c14 ("powerpc: Emulate sync
instruction variants") introduced a build breakage with
CONFIG_PPC_EMULATED_STATS enabled.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Kumar Gala <galak@kernel.org>
Cc: James Yang <James.Yang@freescale.com>
---
|
|
During "make ppc6xx_defconfig" the following happens:
HOSTCC scripts/basic/fixdep
GEN /usr/local/src/tmp/lnx/Makefile
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
arch/powerpc/configs/ppc6xx_defconfig:74:warning: symbol value 'm' invalid for MCU_MPC8349EMITX
Setting CONFIG_MCU_MPC8349EMITX=y in ppc6xx_defconfig makes the warning
go away. This too has been reported by Geert Uytterhoeven a long time ago:
https://lkml.org/lkml/2011/11/13/11 - I only came across this because I
needed a "clean" defconfig for this Powerbook G5.
Signed-off-by: Christian Kujau <lists@nerdbynature.de>
[scottwood@freescale.com: cleaned up commit message slightly]
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
In case of error, the function platform_device_register_simple() returns
RR_PTR() and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
The P1010RDB-PB is similar to P1010RDB(P1010RDB-PA).
So, P1010RDB-PB use the same platform file as P1010RDB.
Then Add support for P1010RDB-PB platform.
Signed-off-by: Zhao Qiang <B45475@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
A few new i2c-drivers came into the kernel which clear the clientdata-pointer
on exit or error. This is obsolete meanwhile, the core will do it.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
Add the missing iounmap() before return from hlwd_pic_init()
in the error handling case.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
Activating CONFIG_PIN_TLB allows access to the 24 first Mbytes of
memory at bootup instead of 8. It is needed for "big" kernels for
instance when activating CONFIG_LOCKDEP_SUPPORT. This needs to be
taken into account in init_32 too, otherwise memory allocation soon
fails after startup.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
Activating CONFIG_PIN_TLB is supposed to pin the IMMR and the first
three 8Mbytes pages. But the setting of MD_CTR to a pinnable entry was
missing before the pinning of the third 8Mb page. As the index is
decremented module 28 (MD_RSV4D is set) after every DTLB update, the
third 8Mbytes page was not pinned.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
Currently all these boards use the same machine struct and also select
the same kernel options, so it seems a bit of redundant to keep one
separate kernel option for each board. Also update the defconfigs
according to this change.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
This file is also used by some RDB and QDS boards. So the name seems
not so accurate. Rename it to corenet_generic.c. Also update the
function names in this file according to the change.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
|
|
In the current kernel, the board files for p2041rdb, p3041ds, p4080ds,
p5020ds, p5040ds, t4240qds and b4qds are almost the same except the
machine name. So this introduces a cornet_generic machine to support
all these boards to avoid the code duplication.
With these changes the file corenet_ds.h becomes useless. Just delete
it.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
C290PCIe has NAND flash present on IFC Chip Select(CS) 1.
So Add "ranges" field for NAND flash on CS1.
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
B4860EMU is a emualtor target with minimum peripherals. It is based on
B4860QDS and trimmed down most peripherals due to either not modeled or
lack of board level connections. The main purpose of this minimum dts is
to speed up booting on emulator.
Signed-off-by: York Sun <yorksun@freescale.com>
[scottwood@freescale.com: whitespace fix]
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
T4240EMU is an emulator target with minimum peripherals. It is based on
T4240QDS and trimmed down most peripherals due to either not modeled or
lack of board level connections. The main purpose of this minimum dts is
to speed up booting on emulator.
Signed-off-by: York Sun <yorksun@freescale.com>
[scottwood@freescale.com: whitespace fixes]
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
Commit 9837b43c5f3514e5d28f65f1513f4dc6759d2810 ("powerpc/85xx: enable
coreint for all the 64bit boards") removed the ifdef that avoided
coreint on 64-bit, but it missed b4_qds.c.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Shaveta Leekha <shaveta@freescale.com>
|
|
The commit e0908085fc2391c85b85fb814ae1df377c8e0dcb ("powerpc/8xx: Fix
regression introduced by cache coherency rewrite") is not needed
anymore. The issue was because dcbst wrongly sets the store bit when
causing a DTLB error, but this is now fixed by commit
0a2ab51ffb8dfdf51402dcfb446629648c96bc78 ("powerpc/8xx: Fixup DAR from
buggy dcbX instructions.") which handles the buggy dcbx instructions on
data page faults on the 8xx.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[scottwood@freescale.com: fix commit message]
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
In both B4 and T4240QDS platform PCA9547 I2C bus multiplexer is used.
The sub-nodes are also reorganized according to right I2C topology.
Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
Enable CONFIG_AT803X_PHY to support AR8030/8033/8035 PHY.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
We use property "sdhci,auto-cmd12" instead of "fsl,sdhci-auto-cmd12"
to distinguish if the sdhc host has quirk SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12.
Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
Freescale T4240QDS reference board has extra voltage shifters added
to allow 3.3V operation, so add 3.3v voltage support for T4240QDS.
1.8v and 3.3v is recommand for eMMC and SDHC card.
Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
This patch modifies the Oops message in case of Software Emulation Exception.
The existing message is quite confusing because it refers to FPU Emulation
while most often the issue is due to either a non supported instruction
(not necessarily FPU related) or a stale instruction due to HW issues.
The new message tries to be more generic in order to make the user understand
that the Oops is due to something wrong with an instruction, not necessarily
due to an FPU instruction.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
The regset defintion for SPE doesn't have the core_note_type
set, which prevents it from being dumped. Add the note type
NT_PPC_SPE for SPE regset.
Signed-off-by: Suzuki K Poulose <suzuki@in.ibm.com>
Cc: Roland McGrath <roland@hack.frob.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
bsc9131 device tree does not have these properties.
Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
b4420 and b4860 device trees do not have these properties.
Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
Freescale platform has class code = 0x0b2000, when it boots. This makes
kernel PCI bus code to setup these devices resulting into the following
notice information when trying to enable them:
pci 0000:00:00.0: ignoring class 0x0b2000 (doesn't match header type 01)
The above information is outputted by judging value of dev->class before
pci_setup_device() function, and the DECLARE_PCI_FIXUP_HEADER quirk runs
after pci_setup_device() function. But the DECLARE_PCI_FIXUP_EARLY quirk
runs before judging value of dev->class and pci_setup_device() function.
So we use the DECLARE_PCI_FIXUP_EARLY macro to fix this issue.
Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
For B4 platform, MPIC EISR register is in reversed bitmap order,
instead of "Error interrupt source 0-31. Bit 0 represents SRC0."
the correct ordering is "Error interrupt source 0-31. Bit 0
represents SRC31." This patch is to fix sRIO EISR bit value
of error interrupt in dts node.
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
The code for privacy extentions is very mature, and making it
configurable only gives marginal memory/code savings in exchange
for obfuscation and hard to read code via CPP ifdef'ery.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull Xtensa patchset from Chris Zankel:
"The main patch fixes a bug that can cause a kernel panic, and was
introduced in rc1. The other two have been discovered by a uclibc
test and 'coccinelle'"
* tag 'xtensa-next-20131015' of git://github.com/czankel/xtensa-linux:
xtensa: Cocci spatch "noderef"
xtensa: don't use alternate signal stack on threads
xtensa: fix fast_syscall_spill_registers_fixup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of four patches that revert functionality introduced in
the merge window to sg. The locking changes turned out to introduce
this bug:
[ 205.372901] [ BUG: lock held when returning to user space! ]
[...]
[ 205.373285] #0: (&sdp->o_sem){.+.+..}, at: [<ffffffff8161e650>] sg_open+0x3a0/0x4d0
The fix is large, so at this late stage we'd like to revert the
functionality and start again in the next merge window"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] Revert "sg: use rwsem to solve race during exclusive open"
[SCSI] Revert "sg: no need sg_open_exclusive_lock"
[SCSI] Revert "sg: checking sdp->detached isn't protected when open"
[SCSI] Revert "sg: push file descriptor list locking down to per-device locking"
|
|
Two of the versatile irq definitions are incorrect, mostly because two
devices have connections to more than one interrupt controller. Fix them
by using the new interrupts-extended property to fan out without using
an awful interrupt-map nexus node.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
|
|
Alexander Aring says:
====================
6lowpan: trivial changes
This patch series includes some trivial changes to prepare the 6lowpan stack
for upcomming patch-series which mainly fix fragmentation according to rfc4944
and udp handling(which is currently broken).
Changes since v3:
- really fix intendation in patch 3/5
Changes since v2:
- change intendation in patch 3/5
- fix typo in 5/5 unecessary -> unnecessary
- add missing 6lowpan tag in cover-letter
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The standard interrupts property in device tree can only handle
interrupts coming from a single interrupt parent. If a device is wired
to multiple interrupt controllers, then it needs to be attached to a
node with an interrupt-map property to demux the interrupt specifiers
which is confusing. It would be a lot easier if there was a form of the
interrupts property that allows for a separate interrupt phandle for
each interrupt specifier.
This patch does exactly that by creating a new interrupts-extended
property which reuses the phandle+arguments pattern used by GPIOs and
other core bindings.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Kumar Gala <galak@codeaurora.org>
[grant.likely: removed versatile platform hunks into separate patch]
Cc: Rob Herring <rob.herring@calxeda.com>
|
|
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch removes the assignment of skb->dev. We don't need it here because
we use the netdev_alloc_skb_ip_align function which already sets the
skb->dev.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch uses the netdev_alloc_skb instead dev_alloc_skb function and
drops the seperate assignment to skb->dev.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The err variable can only be zero in this case.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into linux-next
Pull fs-cache fixes from David Howells:
Can you pull these commits to fix an issue with NFS whereby caching can be
enabled on a file that is open for writing by subsequently opening it for
reading. This can be made to crash by opening it for writing again if you're
quick enough.
The gist of the patchset is that the cookie should be acquired at inode
creation only and subsequently enabled and disabled as appropriate (which
dispenses with the backing objects when they're not needed).
The extra synchronisation that NFS does can then be dispensed with as it is
thenceforth managed by FS-Cache.
Could you send these on to Linus?
This likely will need fixing also in CIFS and 9P also once the FS-Cache
changes are upstream. AFS and Ceph are probably safe.
* 'fscache' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
NFS: Use i_writecount to control whether to get an fscache cookie in nfs_open()
FS-Cache: Provide the ability to enable/disable cookies
FS-Cache: Add use/unuse/wake cookie wrappers
|
