| Age | Commit message (Collapse) | Author |
|---|
|
Trivial fix to spelling mistake "successed" to "succeeded"
in debug message. Also unwrap multi-line literal string.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This mistake was causing debugfs directory creation
failures when multiple ibmvnic devices were probed.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This structure was mapped but never subsequently unmapped.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
efx_copy_channel() doesn't correctly clear the napi_hash related state.
This means that when napi_hash_add is called for that channel nothing is
done, and we are left with a copy of the napi_hash_node from the old
channel. When we later call napi_hash_del() on this channel we have a
stale napi_hash_node.
Corruption is only seen when there are multiple entries in one of the
napi_hash lists. This is made more likely by having a very large number
of channels. Testing was carried out with 512 channels - 32 channels on
each of 16 ports.
This failure typically appears as protection faults within napi_by_id()
or napi_hash_add(). efx_copy_channel() is only used when tx or rx ring
sizes are changed (ethtool -G).
Fixes: 36763266bbe8 ("sfc: Add support for busy polling")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Pull KVM fixes from Paolo Bonzini:
"ARM fixes. There are a couple pending x86 patches but they'll have to
wait for next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm/arm64: vgic: Kick VCPUs when queueing already pending IRQs
KVM: arm/arm64: vgic: Prevent access to invalid SPIs
arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a single CPU
|
|
Merge media fixes from Mauro Carvalho Chehab:
"This contains two patches fixing problems with my patch series meant
to make USB drivers to work again after the DMA on stack changes.
The last patch on this series is actually not related to DMA on stack.
It solves a longstanding bug affecting module unload, causing
module_put() to be called twice. It was reported by the user who
reported and tested the issues with the gp8psk driver with the DMA
fixup patches. As we're late at -rc cycle, maybe you prefer to not
apply it right now. If this is the case, I'll add to the pile of
patches for 4.10.
Exceptionally this time, I'm sending the patches via e-mail, because
I'm on another trip, and won't be able to use the usual procedure
until Monday. Also, it is only three patches, and you followed already
the discussions about the first one"
* emailed patches from Mauro Carvalho Chehab <mchehab@osg.samsung.com>:
gp8psk: Fix DVB frontend attach
gp8psk: fix gp8psk_usb_in_op() logic
dvb-usb: move data_mutex to struct dvb_usb_device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are three small driver fixes for some reported issues for
4.9-rc5.
One for the hyper-v subsystem, fixing up a naming issue that showed up
in 4.9-rc1, one mei driver fix, and one fix for parallel ports,
resolving a reported regression.
All have been in linux-next with no reported issues"
* tag 'char-misc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
ppdev: fix double-free of pp->pdev->name
vmbus: make sysfs names consistent with PCI
mei: bus: fix received data size check in NFC fixup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver core fixes for 4.9-rc5.
The first resolves an issue with some drivers not liking to be unbound
and bound again (if CONFIG_DEBUG_TEST_DRIVER_REMOVE is enabled), which
solves some reported problems with graphics and storage drivers. The
other resolves a smatch error with the 4.9-rc1 driver core changes
around this feature.
Both have been in linux-next with no reported issues"
* tag 'driver-core-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: fix smatch warning on dev->bus check
driver core: skip removal test for non-removable drivers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Grek KH:
"Here are a few small staging and iio driver fixes for reported issues.
The last one was cherry-picked from my -next branch to resolve a build
warning that Arnd fixed, in his quest to be able to turn
-Wmaybe-uninitialized back on again. That patch, and all of the
others, have been in linux-next for a while with no reported issues"
* tag 'staging-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: maxim_thermocouple: detect invalid storage size in read()
staging: nvec: remove managed resource from PS2 driver
Revert "staging: nvec: ps2: change serio type to passthrough"
drivers: staging: nvec: remove bogus reset command for PS/2 interface
staging: greybus: arche-platform: fix device reference leak
staging: comedi: ni_tio: fix buggy ni_tio_clock_period_ps() return value
staging: sm750fb: Fix bugs introduced by early commits
iio: hid-sensors: Increase the precision of scale to fix wrong reading interpretation.
iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)
iio: st_sensors: fix scale configuration for h3lis331dl
staging: iio: ad5933: avoid uninitialized variable in error case
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / PHY fixes from Greg KH:
"Here are a number of small USB and PHY driver fixes for 4.9-rc5
Nothing major, just small fixes for reported issues, all of these have
been in linux-next for a while with no reported issues"
* tag 'usb-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: cdc-acm: fix TIOCMIWAIT
cdc-acm: fix uninitialized variable
drivers/usb: Skip auto handoff for TI and RENESAS usb controllers
usb: musb: remove duplicated actions
usb: musb: da8xx: Don't print phy error on -EPROBE_DEFER
phy: sun4i: check PMU presence when poking unknown bit of pmu
phy-rockchip-pcie: remove deassert of phy_rst from exit callback
phy: da8xx-usb: rename the ohci device to ohci-da8xx
phy: Add reset callback for not generic phy
uwb: fix device reference leaks
usb: gadget: u_ether: remove interrupt throttling
usb: dwc3: st: add missing <linux/pinctrl/consumer.h> include
usb: dwc3: Fix error handling for core init
|
|
Pull more block fixes from Jens Axboe:
"Since I mistakenly left out the lightnvm regression fix yesterday and
the aoeblk seems adequately tested at this point, might as well send
out another pull to make -rc5"
* 'for-linus' of git://git.kernel.dk/linux-block:
aoe: fix crash in page count manipulation
lightnvm: invalid offset calculation for lba_shift
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The megaraid_sas patch in here fixes a major regression in the last
fix set that made all megaraid_sas cards unusable. It turns out no-one
had actually tested such an "obvious" fix, sigh. The fix for the fix
has been tested ...
The next most serious is the vmw_pvscsi abort problem which basically
means that aborts don't work on the vmware paravirt devices and error
handling always escalates to reset.
The rest are an assortment of missed reference counting in certain
paths and corner case bugs that show up on some architectures"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: fix macro MEGASAS_IS_LOGICAL to avoid regression
scsi: qla2xxx: fix invalid DMA access after command aborts in PCI device remove
scsi: qla2xxx: do not queue commands when unloading
scsi: libcxgbi: fix incorrect DDP resource cleanup
scsi: qla2xxx: Fix scsi scan hang triggered if adapter fails during init
scsi: scsi_dh_alua: Fix a reference counting bug
scsi: vmw_pvscsi: return SUCCESS for successful command aborts
scsi: mpt3sas: Fix for block device of raid exists even after deleting raid disk
scsi: scsi_dh_alua: fix missing kref_put() in alua_rtpg_work()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"The typical collection of minor bug fixes in clk drivers. We don't
have anything in the core framework here, just driver fixes.
There's a boot fix for Samsung devices and a safety measure for qoriq
to prevent CPUs from running too fast. There's also a fix for i.MX6Q
to properly handle audio clock rates. We also have some "that's
obviously wrong" fixes like bad NULL pointer checks in the MPP driver
and a poor usage of __pa in the xgene clk driver that are fixed here"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mmp: pxa910: fix return value check in pxa910_clk_init()
clk: mmp: pxa168: fix return value check in pxa168_clk_init()
clk: mmp: mmp2: fix return value check in mmp2_clk_init()
clk: qoriq: Don't allow CPU clocks higher than starting value
clk: imx: fix integer overflow in AV PLL round rate
clk: xgene: Don't call __pa on ioremaped address
clk/samsung: Use CLK_OF_DECLARE_DRIVER initialization method for CLKOUT
clk: rockchip: don't return NULL when failing to register ddrclk branch
|
|
The DVB binding schema at the DVB core assumes that the frontend is a
separate driver. Faling to do that causes OOPS when the module is
removed, as it tries to do a symbol_put_addr on an internal symbol,
causing craches like:
WARNING: CPU: 1 PID: 28102 at kernel/module.c:1108 module_put+0x57/0x70
Modules linked in: dvb_usb_gp8psk(-) dvb_usb dvb_core nvidia_drm(PO) nvidia_modeset(PO) snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd soundcore nvidia(PO) [last unloaded: rc_core]
CPU: 1 PID: 28102 Comm: rmmod Tainted: P WC O 4.8.4-build.1 #1
Hardware name: MSI MS-7309/MS-7309, BIOS V1.12 02/23/2009
Call Trace:
dump_stack+0x44/0x64
__warn+0xfa/0x120
module_put+0x57/0x70
module_put+0x57/0x70
warn_slowpath_null+0x23/0x30
module_put+0x57/0x70
gp8psk_fe_set_frontend+0x460/0x460 [dvb_usb_gp8psk]
symbol_put_addr+0x27/0x50
dvb_usb_adapter_frontend_exit+0x3a/0x70 [dvb_usb]
From Derek's tests:
"Attach bug is fixed, tuning works, module unloads without
crashing. Everything seems ok!"
Reported-by: Derek <user.vdr@gmail.com>
Tested-by: Derek <user.vdr@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit bc29131ecb10 ("[media] gp8psk: don't do DMA on stack") fixed the
usage of DMA on stack, but the memcpy was wrong for gp8psk_usb_in_op().
Fix it.
From Derek's email:
"Fix confirmed using 2 different Skywalker models with
HD mpeg4, SD mpeg2."
Suggested-by: Johannes Stezenbach <js@linuxtv.org>
Fixes: bc29131ecb10 ("[media] gp8psk: don't do DMA on stack")
Tested-by: Derek <user.vdr@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The data_mutex is initialized too late, as it is needed for
each device driver's power control, causing an OOPS:
dvb-usb: found a 'TerraTec/qanu USB2.0 Highspeed DVB-T Receiver' in warm state.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100 PGD 0
Oops: 0002 [#1] SMP
Modules linked in: dvb_usb_cinergyT2(+) dvb_usb
CPU: 0 PID: 2029 Comm: modprobe Not tainted 4.9.0-rc4-dvbmod #24
Hardware name: FUJITSU LIFEBOOK A544/FJNBB35 , BIOS Version 1.17 05/09/2014
task: ffff88020e943840 task.stack: ffff8801f36ec000
RIP: 0010:[<ffffffff846617af>] [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100
RSP: 0018:ffff8801f36efb10 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff88021509bdc8 RCX: 00000000c0000100
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88021509bdcc
RBP: ffff8801f36efb58 R08: ffff88021f216320 R09: 0000000000100000
R10: ffff88021f216320 R11: 00000023fee6c5a1 R12: ffff88020e943840
R13: ffff88021509bdcc R14: 00000000ffffffff R15: ffff88021509bdd0
FS: 00007f21adb86740(0000) GS:ffff88021f200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000215bce000 CR4: 00000000001406f0
Call Trace:
mutex_lock+0x16/0x25
cinergyt2_power_ctrl+0x1f/0x60 [dvb_usb_cinergyT2]
dvb_usb_device_init+0x21e/0x5d0 [dvb_usb]
cinergyt2_usb_probe+0x21/0x50 [dvb_usb_cinergyT2]
usb_probe_interface+0xf3/0x2a0
driver_probe_device+0x208/0x2b0
__driver_attach+0x87/0x90
driver_probe_device+0x2b0/0x2b0
bus_for_each_dev+0x52/0x80
bus_add_driver+0x1a3/0x220
driver_register+0x56/0xd0
usb_register_driver+0x77/0x130
do_one_initcall+0x46/0x180
free_vmap_area_noflush+0x38/0x70
kmem_cache_alloc+0x84/0xc0
do_init_module+0x50/0x1be
load_module+0x1d8b/0x2100
find_symbol_in_section+0xa0/0xa0
SyS_finit_module+0x89/0x90
entry_SYSCALL_64_fastpath+0x13/0x94
Code: e8 a7 1d 00 00 8b 03 83 f8 01 0f 84 97 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 4c 89 3c 24 41 be ff ff ff ff 48 89 44 24 08 <48> 89 20 4c 89 64 24 10 eb 1a 49 c7 44 24 08 02 00 00 00 c6 43 RIP [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100 RSP <ffff8801f36efb10>
CR2: 0000000000000000
So, move it to the struct dvb_usb_device and initialize it
before calling the driver's callbacks.
Reported-by: Jörg Otte <jrg.otte@gmail.com>
Tested-by: Jörg Otte <jrg.otte@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Jiri Pirko says:
====================
mlxsw: Couple of fixes
Please, queue-up both for stable. Thanks!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The device's neighbour table is periodically dumped in order to update
the kernel about active neighbours. A single dump session may span
multiple queries, until the response carries less records than requested
or when a record (can contain up to four neighbour entries) is not full.
Current code stops the session when the number of returned records is
zero, which can result in infinite loop in case of high packet rate.
Fix this by stopping the session according to the above logic.
Fixes: c723c735fa6b ("mlxsw: spectrum_router: Periodically update the kernel's neigh table")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When binding port to a newly created span entry, its refcount is
initialized to zero even though it has a bound port. That leads
to unexpected behaviour when the user tries to delete that port
from the span entry.
Fix this by initializing the reference count to 1.
Also add a warning to put function.
Fixes: 763b4b70afcd ("mlxsw: spectrum: Add support in matchall mirror TC offloading")
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Michael Chan says:
====================
bnxt_en: 2 bug fixes.
Bug fixes in bnxt_setup_tc() and VF vitual link state.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the physical link is down and the VF virtual link is set to "enable",
the current code does not always work. If the link is down but the
cable is attached, the firmware returns LINK_SIGNAL instead of
NO_LINK. The current code is treating LINK_SIGNAL as link up.
The fix is to treat link as down when the link_status != LINK.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The logic is missing the check on whether the tx and rx rings are sharing
completion rings or not.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit cf00713a655d ("include/uapi/linux/atm_zatm.h: include
linux/time.h").
This attempted to fix userspace breakage that no longer existed when
the patch was merged. Almost one year earlier, commit 70ba07b675b5
("atm: remove 'struct zatm_t_hist'") deleted the struct in question.
After this patch was merged, we now have to deal with people being
unable to include this header in conjunction with standard C library
headers like stdlib.h (which linux-atm does). Example breakage:
x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I./../q2931 -I./../saal \
-I. -DCPPFLAGS_TEST -I../../src/include -O2 -march=native -pipe -g \
-frecord-gcc-switches -freport-bug -Wimplicit-function-declaration \
-Wnonnull -Wstrict-aliasing -Wparentheses -Warray-bounds \
-Wfree-nonheap-object -Wreturn-local-addr -fno-strict-aliasing -Wall \
-Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c zntune.c
In file included from /usr/include/linux/atm_zatm.h:17:0,
from zntune.c:17:
/usr/include/linux/time.h:9:8: error: redefinition of ‘struct timespec’
struct timespec {
^
In file included from /usr/include/sys/select.h:43:0,
from /usr/include/sys/types.h:219,
from /usr/include/stdlib.h:314,
from zntune.c:9:
/usr/include/time.h:120:8: note: originally defined here
struct timespec
^
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With syzkaller help, Marco Grassi found a bug in TCP stack,
crashing in tcp_collapse()
Root cause is that sk_filter() can truncate the incoming skb,
but TCP stack was not really expecting this to happen.
It probably was expecting a simple DROP or ACCEPT behavior.
We first need to make sure no part of TCP header could be removed.
Then we need to adjust TCP_SKB_CB(skb)->end_seq
Many thanks to syzkaller team and Marco for giving us a reproducer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Marco Grassi <marco.gra@gmail.com>
Reported-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In v2.6, ip_rt_redirect() calls arp_bind_neighbour() which returns 0
and then the state of the neigh for the new_gw is checked. If the state
isn't valid then the redirected route is deleted. This behavior is
maintained up to v3.5.7 by check_peer_redirect() because rt->rt_gateway
is assigned to peer->redirect_learned.a4 before calling
ipv4_neigh_lookup().
After commit 5943634fc559 ("ipv4: Maintain redirect and PMTU info in
struct rtable again."), ipv4_neigh_lookup() is performed without the
rt_gateway assigned to the new_gw. In the case when rt_gateway (old_gw)
isn't zero, the function uses it as the key. The neigh is most likely
valid since the old_gw is the one that sends the ICMP redirect message.
Then the new_gw is assigned to fib_nh_exception. The problem is: the
new_gw ARP may never gets resolved and the traffic is blackholed.
So, use the new_gw for neigh lookup.
Changes from v1:
- use __ipv4_neigh_lookup instead (per Eric Dumazet).
Fixes: 5943634fc559 ("ipv4: Maintain redirect and PMTU info in struct rtable again.")
Signed-off-by: Stephen Suryaputra Lin <ssurya@ieee.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If usb_submit_urb() called from the open function fails, the following
crash may be observed.
r8152 8-1:1.0 eth0: intr_urb submit failed: -19
...
r8152 8-1:1.0 eth0: v1.08.3
Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b7b
pgd = ffffffc0e7305000
[6b6b6b6b6b6b6b7b] *pgd=0000000000000000, *pud=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
...
PC is at notifier_chain_register+0x2c/0x58
LR is at blocking_notifier_chain_register+0x54/0x70
...
Call trace:
[<ffffffc0002407f8>] notifier_chain_register+0x2c/0x58
[<ffffffc000240bdc>] blocking_notifier_chain_register+0x54/0x70
[<ffffffc00026991c>] register_pm_notifier+0x24/0x2c
[<ffffffbffc183200>] rtl8152_open+0x3dc/0x3f8 [r8152]
[<ffffffc000808000>] __dev_open+0xac/0x104
[<ffffffc0008082f8>] __dev_change_flags+0xb0/0x148
[<ffffffc0008083c4>] dev_change_flags+0x34/0x70
[<ffffffc000818344>] do_setlink+0x2c8/0x888
[<ffffffc0008199d4>] rtnl_newlink+0x328/0x644
[<ffffffc000819e98>] rtnetlink_rcv_msg+0x1a8/0x1d4
[<ffffffc0008373c8>] netlink_rcv_skb+0x68/0xd0
[<ffffffc000817990>] rtnetlink_rcv+0x2c/0x3c
[<ffffffc000836d1c>] netlink_unicast+0x16c/0x234
[<ffffffc00083720c>] netlink_sendmsg+0x340/0x364
[<ffffffc0007e85d0>] sock_sendmsg+0x48/0x60
[<ffffffc0007e9c30>] SyS_sendto+0xe0/0x120
[<ffffffc0007e9cb0>] SyS_send+0x40/0x4c
[<ffffffc000203e34>] el0_svc_naked+0x24/0x28
Clean up error handling to avoid registering the notifier if the open
function is going to fail.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using AES-XTS on a Wandboard, we receive a Mode error:
caam_jr 2102000.jr1: 20001311: CCB: desc idx 19: AES: Mode error.
According to the Security Reference Manual, the Low Power AES units
of the i.MX6 do not support the XTS mode. Therefore we must not
register XTS implementations in the Crypto API.
Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: <stable@vger.kernel.org> # 4.4+
Fixes: c6415a6016bf "crypto: caam - add support for acipher xts(aes)"
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As found by gcc -Wmaybe-uninitialized, having a storage_bytes value other
than 2 or 4 will result in undefined behavior:
drivers/iio/temperature/maxim_thermocouple.c: In function 'maxim_thermocouple_read':
drivers/iio/temperature/maxim_thermocouple.c:141:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This probably cannot happen, but returning -EINVAL here is appropriate
and makes gcc happy and the code more robust.
Fixes: 231147ee77f3 ("iio: maxim_thermocouple: Align 16 bit big endian value of raw reads")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
(cherry picked from commit 32cb7d27e65df9daa7cee8f1fdf7b259f214bee2)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Booting an EFI mixed mode kernel has been crashing since commit:
e37e43a497d5 ("x86/mm/64: Enable vmapped stacks (CONFIG_HAVE_ARCH_VMAP_STACK=y)")
The user-visible effect in my test setup was the kernel being unable
to find the root file system ramdisk. This was likely caused by silent
memory or page table corruption.
Enabling CONFIG_DEBUG_VIRTUAL=y immediately flagged the thunking code as
abusing virt_to_phys() because it was passing addresses that were not
part of the kernel direct mapping.
Use the slow version instead, which correctly handles all memory
regions by performing a page table walk.
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20161112210424.5157-3-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fix this when building on 32-bit:
arch/x86/platform/efi/efi.c: In function ‘__efi_enter_virtual_mode’:
arch/x86/platform/efi/efi.c:911:5: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
(efi_memory_desc_t *)pa);
^
arch/x86/platform/efi/efi.c:918:5: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
(efi_memory_desc_t *)pa);
^
The @pa local variable is declared as phys_addr_t and that is a u64 when
CONFIG_PHYS_ADDR_T_64BIT=y. (The last is enabled on 32-bit on a PAE
build.)
However, its value comes from __pa() which is basically doing pointer
arithmetic and checking, and returns unsigned long as it is the native
pointer width.
So let's use an unsigned long too. It should be fine to do so because
the later users cast it to a pointer too.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20161112210424.5157-2-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
__LINUX_IF_ETHER_H is not defined anywhere, and if_ether.h can keep itself from
double inclusion, though it uses a single underscore prefix.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After Tom patch, thoff field could point past the end of the buffer,
this could fool some callers.
If an skb was provided, skb->len should be the upper limit.
If not, hlen is supposed to be the upper limit.
Fixes: a6e544b0a88b ("flow_dissector: Jump to exit code in __skb_flow_dissect")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yibin Yang <yibyang@cisco.com
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Martin KaFai Lau says:
====================
bpf: Fix bpf_redirect to an ipip/ip6tnl dev
This patch set fixes a bug in bpf_redirect(dev, flags) when dev is an
ipip/ip6tnl. The current problem is IP-EthHdr-IP is sent out instead of
IP-IP.
Patch 1 adds a dev->type test similar to dev_is_mac_header_xmit()
in act_mirred.c which is only available in net-next. We can consider to
refactor it once this patch is pulled into net-next from net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test creates two netns, ns1 and ns2. The host (the default netns)
has an ipip or ip6tnl dev configured for tunneling traffic to the ns2.
ping VIPS from ns1 <----> host <--tunnel--> ns2 (VIPs at loopback)
The test is to have ns1 pinging VIPs configured at the loopback
interface in ns2.
The VIPs are 10.10.1.102 and 2401:face::66 (which are configured
at lo@ns2). [Note: 0x66 => 102].
At ns1, the VIPs are routed _via_ the host.
At the host, bpf programs are installed at the veth to redirect packets
from a veth to the ipip/ip6tnl. The test is configured in a way so
that both ingress and egress can be tested.
At ns2, the ipip/ip6tnl dev is configured with the local and remote address
specified. The return path is routed to the dev ipip/ip6tnl.
During egress test, the host also locally tests pinging the VIPs to ensure
that bpf_redirect at egress also works for the direct egress (i.e. not
forwarding from dev ve1 to ve2).
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the bpf program calls bpf_redirect(dev, 0) and dev is
an ipip/ip6tnl, it currently includes the mac header.
e.g. If dev is ipip, the end result is IP-EthHdr-IP instead
of IP-IP.
The fix is to pull the mac header. At ingress, skb_postpull_rcsum()
is not needed because the ethhdr should have been pulled once already
and then got pushed back just before calling the bpf_prog.
At egress, this patch calls skb_postpull_rcsum().
If bpf_redirect(dev, BPF_F_INGRESS) is called,
it also fails now because it calls dev_forward_skb() which
eventually calls eth_type_trans(skb, dev). The eth_type_trans()
will set skb->type = PACKET_OTHERHOST because the mac address
does not match the redirecting dev->dev_addr. The PACKET_OTHERHOST
will eventually cause the ip_rcv() errors out. To fix this,
____dev_forward_skb() is added.
Joint work with Daniel Borkmann.
Fixes: cfc7381b3002 ("ip_tunnel: add collect_md mode to IPIP tunnel")
Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
aoeblk contains some mysterious code, that wants to elevate the bio
vec page counts while it's under IO. That is not needed, it's
fragile, and it's causing kernel oopses for some.
Reported-by: Tested-by: Don Koch <kochd@us.ibm.com>
Tested-by: Tested-by: Don Koch <kochd@us.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This is a work around for a bug with LSI Fusion MPT SAS2 when perfoming
secure erase. Due to the very long time the operation takes, commands
issued during the erase will time out and will trigger execution of the
abort hook. Even though the abort hook is called for the specific
command which timed out, this leads to entire device halt
(scsi_state terminated) and premature termination of the secure erase.
Set device state to busy while ATA passthrough commands are in progress.
[mkp: hand applied to 4.9/scsi-fixes, tweaked patch description]
Signed-off-by: Andrey Grodzovsky <andrey2805@gmail.com>
Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Cc: <linux-scsi@vger.kernel.org>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes for perf {top,report} --hierarchy, from Arnaldo Carvalho de Melo:
- These are fixes for the --hierarchy view of perf top and report, fixing
output oddities, mostly related to scrolling. (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Since the KERN_CONT changes, the current code in show_instructions()
prints out a whole bunch of unnecessary newlines. Change occurrences of
printk("\n") to pr_cont("\n"). While we're here, change all the other
cases of printk(KERN_CONT ...) to pr_cont() as well.
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Fix up our oops output by converting continuation lines to use
pr_cont(). Some of these are dubious, eg. printing a continuation line
which starts with a newline, but seem to work OK for now. This whole
function needs a rewrite in the next release.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Since the KERN_CONT changes these are being horribly split across lines,
for example:
MSR: 8000000000009033 <
SF,EE
,ME,IR
,DR,RI
,LE>
So fix it by using pr_cont() where appropriate.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Previously we got away with printing the stack trace in multiple pieces
and it usually looked right. But since commit 4bcc595ccd80 ("printk:
reinstate KERN_CONT for printing continuation lines"), KERN_CONT is now
required when printing continuation lines. Use pr_cont() as appropriate.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The changes to use gas sections for constructing the exception vectors
causes a build break when using binutils 2.23:
arch/powerpc/kernel/exceptions-64s.S:770: Error: operand out of range
(0xffffffffffff8100 is not between 0x0000000000000000 and 0x000000000000ffff)
And so on.
Reported by Hugh with binutils-2.23.2-8.1.4.ppc64 from openSUSE 13.1 and
also Naveen & Denis using 2.23.52.0.1-26.el7 from RHEL 7. Strangely
binutils 2.22 (what I test with) is not affected.
This is caused by the use of @l in LOAD_HANDLER(). The @l was only
recently added in commit a24553dd02dc ("powerpc/pseries: Remove
unnecessary syscall trampoline").
Luckily the gas section changes split out the LOAD_SYSCALL_HANDLER()
macro, which means we actually *don't* need to use @l in LOAD_HANDLER()
any more, only in LOAD_SYSCALL_HANDLER().
So drop the @l from LOAD_HANDLER().
Fixes: 57f266497d81 ("powerpc: Use gas sections for arranging exception vectors")
Signed-off-by: Hugh Dickins <hughd@google.com>
[mpe: Add gory details to change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Wakeups from winkle set the low bit of the HSPRG0 register, to
distinguish it from other sleep states. This is also the PACA pointer.
The system reset exception handler fails to mask this bit away before
using this value before using it as the PACA pointer.
Fix this by adding a new type of exception prolog macro where we already
have the PACA set in r13, and have the system reset vector mask it out.
The winkle wakeup handler will store the masked value back into HSPRG0.
Fixes: fb479e44a9e2 ("powerpc/64s: relocation, register save fixes for system reset interrupt")
Cc: stable@vger.kernel.org # v3.0+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The ns->lba_shift assumes its value to be the logarithmic of the
LA size. A previous patch duplicated the lba_shift calculation into
lightnvm. It prematurely also subtracted a 512byte shift, which commonly
is applied per-command. The 512byte shift being subtracted twice led to
data loss when restoring the logical to physical mapping table from
device and when issuing I/O commands using rrpc.
Fix offset by removing the 512byte shift subtraction when calculating
lba_shift.
Fixes: b0b4e09c1ae7 "lightnvm: control life of nvm_dev in driver"
Reported-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a recent regression in the 8250_dw serial driver introduced by
adding a quirk for the APM X-Gene SoC to it which uncovered an issue
related to the handling of built-in device properties in the core ACPI
device enumeration code (Heikki Krogerus)"
* tag 'acpi-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / platform: Add support for build-in properties
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two bugs in error code paths in the PM core (system-wide
suspend of devices), a device reference leak in the boot-time suspend
test code and a cpupower utility regression from the 4.7 cycle.
Specifics:
- Prevent the PM core from attempting to suspend parent devices if
any of their children, whose suspend callbacks were invoked
asynchronously, have failed to suspend during the "late" and
"noirq" phases of system-wide suspend of devices (Brian Norris).
- Prevent the boot-time system suspend test code from leaking a
reference to the RTC device used by it (Johan Hovold).
- Fix cpupower to use the return value of one of its library
functions correctly and restore the correct behavior of it when
used for setting cpufreq tunables broken during the 4.7 development
cycle (Laura Abbott)"
* tag 'pm-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails
PM / sleep: fix device reference leak in test_suspend
cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- mmap handler for dma ops as generic handler no longer works for us
[Alexey]
- Fixes for EZChip platform [Noam]
- Fix RTC clocksource driver build issue
- ARC IRQ handling fixes [Yuriy]
- Revert a recent makefile change which doesn't go well with oldish
tools out in the wild
* tag 'arc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARCv2: MCIP: Use IDU_M_DISTRI_DEST mode if there is only 1 destination core
ARC: IRQ: Do not use hwirq as virq and vice versa
ARC: [plat-eznps] set default baud for early console
ARC: [plat-eznps] remove IPI clear from SMP operations
Revert "ARC: build: retire old toggles"
ARC: timer: rtc: implement read loop in "C" vs. inline asm
ARC: change return value of userspace cmpxchg assist syscall
arc: Implement arch-specific dma_map_ops.mmap
ARC: [SMP] avoid overriding present cpumask
ARC: Enable PERF_EVENTS in nSIM driven platforms
|
|
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Minor doc fix, a DMI match for ideapad and a fix to toshiba-wmi to
avoid loading on non-toshiba systems.
Documentation/ABI:
- ibm_rtl: The "What:" fields are incomplete
toshiba-wmi:
- Fix loading the driver on non Toshiba laptops
ideapad-laptop:
- Add another DMI entry for Yoga 900"
* tag 'platform-drivers-x86-v4.9-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
Documentation/ABI: ibm_rtl: The "What:" fields are incomplete
toshiba-wmi: Fix loading the driver on non Toshiba laptops
ideapad-laptop: Add another DMI entry for Yoga 900
|
