summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-11-11PM / sleep: don't suspend parent when async child suspend_{noirq, late} failsBrian Norris
Consider two devices, A and B, where B is a child of A, and B utilizes asynchronous suspend (it does not matter whether A is sync or async). If B fails to suspend_noirq() or suspend_late(), or is interrupted by a wakeup (pm_wakeup_pending()), then it aborts and sets the async_error variable. However, device A does not (immediately) check the async_error variable; it may continue to run its own suspend_noirq()/suspend_late() callback. This is bad. We can resolve this problem by doing our error and wakeup checking (particularly, for the async_error flag) after waiting for children to suspend, instead of before. This also helps align the logic for the noirq and late suspend cases with the logic in __device_suspend(). It's easy to observe this erroneous behavior by, for example, forcing a device to sleep a bit in its suspend_noirq() (to ensure the parent is waiting for the child to complete), then return an error, and watch the parent suspend_noirq() still get called. (Or similarly, fake a wakeup event at the right (or is it wrong?) time.) Fixes: de377b397272 (PM / sleep: Asynchronous threads for suspend_late) Fixes: 28b6fd6e3779 (PM / sleep: Asynchronous threads for suspend_noirq) Reported-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-11Merge branch 'fixes-for-v4.9-rc5' of ↵Dave Airlie
http://git.agner.ch/git/linux-drm-fsl-dcu into drm-fixes Yet another small batch of fixes. Two of the patches I had prepared since quite some time, but they did not seem to affect operation in a visible manner so far. Until recently, when I discovered the third issue (disable planes before disabling CRTC), which made the two previous fixes necessary. * 'fixes-for-v4.9-rc5' of http://git.agner.ch/git/linux-drm-fsl-dcu: drm/fsl-dcu: disable planes before disabling CRTC drm/fsl-dcu: update all registers on flush drm/fsl-dcu: do not update when modifying irq registers
2016-11-10splice: remove detritus from generic_file_splice_read()Al Viro
i_size check is a leftover from the horrors that used to play with the page cache in that function. With the switch to ->read_iter(), it's neither needed nor correct - for gfs2 it ends up being buggy, since i_size is not guaranteed to be correct until later (inside ->read_iter()). Spotted-by: Abhi Das <adas@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-11-11Merge tag 'imx-drm-fixes-2016-11-10' of ↵Dave Airlie
git://git.pengutronix.de/git/pza/linux into drm-fixes imx-drm: fix possible hangup when disabling crtcs - only ever disable the display controller (DC) module after all plane IDMAC channels are stopped. This fixes a regression introduced by the atomic modeset conversion. * tag 'imx-drm-fixes-2016-11-10' of git://git.pengutronix.de/git/pza/linux: drm/imx: disable planes before DC
2016-11-11Merge branch 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Regression fix for powerplay on some iceland boards. * 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux: drm/amd/powerplay: implement get_clock_by_type for iceland. drm/amd/powerplay/smu7: fix checks in smu7_get_evv_voltages (v2) drm/amd/powerplay: update phm_get_voltage_evv_on_sclk for iceland drm/amd/powerplay: propagate errors in phm_get_voltage_evv_on_sclk
2016-11-11drm/udl: make control msg static const. (v2)Dave Airlie
Thou shall not send control msg from the stack, does that mean I can send it from the RO memory area? and it looks like the answer is no, so here's v2 which kmemdups. Reported-by: poma Tested-by: poma <poma@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-11-10PCI: VMD: Update filename to reflect moveKeith Busch
Updating MAINTAINERS to reflect the new location of the VMD driver. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-11-10i2c: Documentation: i2c-topology: fix minor whitespace nitPeter Rosin
Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-11-10i2c: mux: demux-pinctrl: make drivers with no pinctrl work againWolfram Sang
Some drivers like i2c-gpio do not have dedicated pinctrl states. They broke when error checking for pinctrl was added. Detect them now, and in their case, simply skip over pinctrl configuration. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-11-10libceph: initialize last_linger_id with a large integerIlya Dryomov
osdc->last_linger_id is a counter for lreq->linger_id, which is used for watch cookies. Starting with a large integer should ease the task of telling apart kernel and userspace clients. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-11-10libceph: fix legacy layout decode with pool 0Yan, Zheng
If your data pool was pool 0, ceph_file_layout_from_legacy() transform that to -1 unconditionally, which broke upgrades. We only want do that for a fully zeroed ceph_file_layout, so that it still maps to a file_layout_t. If any fields are set, though, we trust the fl_pgpool to be a valid pool. Fixes: 7627151ea30bc ("libceph: define new ceph_file_layout structure") Link: http://tracker.ceph.com/issues/17825 Signed-off-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-11-10ceph: use default file splice read callbackYan, Zheng
Splice read/write implementation changed recently. When using generic_file_splice_read(), iov_iter with type == ITER_PIPE is passed to filesystem's read_iter callback. But ceph_sync_read() can't serve ITER_PIPE iov_iter correctly (ITER_PIPE iov_iter expects pages from page cache). Fixing ceph_sync_read() requires a big patch. So use default splice read callback for now. Signed-off-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-11-10drm/amd/powerplay: implement get_clock_by_type for iceland.Rex Zhu
iceland use pptable v0. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-11-10Merge remote-tracking branch 'mkp-scsi/4.9/scsi-fixes' into fixesJames Bottomley
2016-11-10Merge branch 'mlxsw-fixes'David S. Miller
Jiri Pirko says: ==================== mlxsw: Couple of router fixes v1->v2: - patch2: - use net_eq ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10mlxsw: spectrum_router: Ignore FIB notification events for non-init namespacesJiri Pirko
Since now, the table with same id in multiple netnamespaces were squashed to a single virtual router. That is not only incorrect, it also causes error messages when trying to use RALUE register to do double remove of FIB entries, like this one: mlxsw_spectrum 0000:03:00.0: EMAD reg access failed (tid=facb831c00007b20,reg_id=8013(ralue),type=write,status=7(bad parameter)) Since we don't allow ports to change namespaces (NETIF_F_NETNS_LOCAL), and the infrastructure is not yet prepared to handle netnamespaces, just ignore FIB notification events for non-init namespaces. That is clear to do since we don't need to offload them. Fixes: b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10mlxsw: spectrum_router: Fix handling of neighbour structureJiri Pirko
__neigh_create function works in a different way than assumed. It passes "n" as a parameter to ndo_neigh_construct. But this "n" might be destroyed right away before __neigh_create() returns in case there is already another neighbour struct in the hashtable with the same dev and primary key. That is not expected by mlxsw_sp_router_neigh_construct() and the stored "n" points to freed memory, eventually leading to crash. Fix this by doing tight 1:1 coupling between neighbour struct and internal driver neigh_entry. That allows to narrow down the key in internal driver hashtable to do lookups by "n" only. Fixes: 6cf3c971dc84 ("mlxsw: spectrum_router: Add private neigh table") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10Merge branch 'qed-fixes'David S. Miller
Yuval Mintz says: ==================== qed: Fix RoCE infrastructure This series fixes 2 basic issues with RoCE support, one handles a missing configuration in the initial infrastructure support while the other is a regression introduced by one of the initial fix submissions. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10qed: Correct rdma params configurationRam Amrani
Previous fix has broken RoCE support as the rdma_pf_params are now being set into the parameters only after the params are alrady assigned into the hw-function. Fixes: 0189efb8f4f8 ("qed*: Fix Kconfig dependencies with INFINIBAND_QEDR") Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10qed: configure ll2 RoCE v1/v2 flavor correctlyRam Amrani
Currently RoCE v2 won't operate with RDMA CM due to missing setting of the roce-flavour in the ll2 configuration. This patch properly sets the flavour, and deletes incorrect HSI that doesn't [yet] exist. Fixes: abd49676c707 ("qed: Add RoCE ll2 & GSI support") Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10arm64: dts: rockchip: add three new resets for rk3399 PCIe controllerShawn Lin
pm_rst, aclk_rst and pclk_rst should be controlled by driver, so we need to add these three resets for PCIe controller. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Heiko Stuebner <heiko@sntech.de>
2016-11-10PCI: rockchip: Add three new resets as required propertiesShawn Lin
pm_rst, aclk_rst, pclk_rst was controlled by ROM code so the software wasn't needed to control it again in theory. But it didn't work properly, so we do need to do it again and add enough delay between the assert of pm_rst and the deassert of pm_rst. The Soc intergrated with this controller, rk3399, is still under MP test internally, so the backward compatibility won't be a big deal. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <robh@kernel.org>
2016-11-10ipv4: update comment to document GSO fragmentation cases.Lance Richardson
This is a follow-up to commit 9ee6c5dc816a ("ipv4: allow local fragmentation in ip_finish_output_gso()"), updating the comment documenting cases in which fragmentation is needed for egress GSO packets. Suggested-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10drm/amd/powerplay/smu7: fix checks in smu7_get_evv_voltages (v2)Alex Deucher
Only check if the tables exist in relevant configs. This fixes a failure on V0 tables. v2: fix version check as suggested by Rex bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-11-10drm/amd/powerplay: update phm_get_voltage_evv_on_sclk for icelandAlex Deucher
Was missing the handling for iceland. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-11-10drm/amd/powerplay: propagate errors in phm_get_voltage_evv_on_sclkAlex Deucher
Missing for one case. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-11-10xprtrdma: Fix DMAR failure in frwr_op_map() after reconnectChuck Lever
When a LOCALINV WR is flushed, the frmr is marked STALE, then frwr_op_unmap_sync DMA-unmaps the frmr's SGL. These STALE frmrs are then recovered when frwr_op_map hunts for an INVALID frmr to use. All other cases that need frmr recovery leave that SGL DMA-mapped. The FRMR recovery path unconditionally DMA-unmaps the frmr's SGL. To avoid DMA unmapping the SGL twice for flushed LOCAL_INV WRs, alter the recovery logic (rather than the hot frwr_op_unmap_sync path) to distinguish among these cases. This solution also takes care of the case where multiple LOCAL_INV WRs are issued for the same rpcrdma_req, some complete successfully, but some are flushed. Reported-by: Vasco Steinmetz <linux@kyberraum.net> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Vasco Steinmetz <linux@kyberraum.net> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-11-10ppdev: fix double-free of pp->pdev->nameJann Horn
free_pardevice() is called by parport_unregister_device() and already frees pp->pdev->name, don't try to do it again. This bug causes kernel crashes. I found and verified this with KASAN and some added pr_emerg()s: [ 60.316568] pp_release: pp->pdev->name == ffff88039cb264c0 [ 60.316692] free_pardevice: freeing par_dev->name at ffff88039cb264c0 [ 60.316706] pp_release: kfree(ffff88039cb264c0) [ 60.316714] ========================================================== [ 60.316722] BUG: Double free or freeing an invalid pointer [ 60.316731] Unexpected shadow byte: 0xFB [ 60.316801] Object at ffff88039cb264c0, in cache kmalloc-32 size: 32 [ 60.316813] Allocated: [ 60.316824] PID = 1695 [ 60.316869] Freed: [ 60.316880] PID = 1695 [ 60.316935] ========================================================== Signed-off-by: Jann Horn <jann@thejh.net> Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10USB: cdc-acm: fix TIOCMIWAITJohan Hovold
The TIOCMIWAIT implementation would return -EINVAL if any of the three supported signals were included in the mask. Instead of returning an error in case TIOCM_CTS is included, simply drop the mask check completely, which is in accordance with how other drivers implement this ioctl. Fixes: 5a6a62bdb925 ("cdc-acm: add TIOCMIWAIT") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10ALSA: hda - add a new condition to check if it is thinkpadHui Wang
Latest Thinkpad laptops use the HKEY_HID LEN0268 instead of the LEN0068, as a result neither audio mute led nor mic mute led can work any more. After adding the new HKEY_HID into the is_thinkpad(), both of them works well as before. Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-11-09net: tcp response should set oif only if it is L3 masterDavid Ahern
Lorenzo noted an Android unit test failed due to e0d56fdd7342: "The expectation in the test was that the RST replying to a SYN sent to a closed port should be generated with oif=0. In other words it should not prefer the interface where the SYN came in on, but instead should follow whatever the routing table says it should do." Revert the change to ip_send_unicast_reply and tcp_v6_send_response such that the oif in the flow is set to the skb_iif only if skb_iif is an L3 master. Fixes: e0d56fdd7342 ("net: l3mdev: remove redundant calls") Reported-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: Lorenzo Colitti <lorenzo@google.com> Acked-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09Net Driver: Add Cypress GX3 VID=04b4 PID=3610.Allan Chou
Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller (Vendor=04b4 ProdID=3610). Patch verified on x64 linux kernel 4.7.4, 4.8.6, 4.9-rc4 systems with the Kensington SD4600P USB-C Universal Dock with Power, which uses the Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller. A similar patch was signed-off and tested-by Allan Chou <allan@asix.com.tw> on 2015-12-01. Allan verified his similar patch on x86 Linux kernel 4.1.6 system with Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller. Tested-by: Allan Chou <allan@asix.com.tw> Tested-by: Chris Roth <chris.roth@usask.ca> Tested-by: Artjom Simon <artjom.simon@gmail.com> Signed-off-by: Allan Chou <allan@asix.com.tw> Signed-off-by: Chris Roth <chris.roth@usask.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains a larger than usual batch of Netfilter fixes for your net tree. This series contains a mixture of old bugs and recently introduced bugs, they are: 1) Fix a crash when using nft_dynset with nft_set_rbtree, which doesn't support the set element updates from the packet path. From Liping Zhang. 2) Fix leak when nft_expr_clone() fails, from Liping Zhang. 3) Fix a race when inserting new elements to the set hash from the packet path, also from Liping. 4) Handle segmented TCP SIP packets properly, basically avoid that the INVITE in the allow header create bogus expectations by performing stricter SIP message parsing, from Ulrich Weber. 5) nft_parse_u32_check() should return signed integer for errors, from John Linville. 6) Fix wrong allocation instead of connlabels, allocate 16 instead of 32 bytes, from Florian Westphal. 7) Fix compilation breakage when building the ip_vs_sync code with CONFIG_OPTIMIZE_INLINING on x86, from Arnd Bergmann. 8) Destroy the new set if the transaction object cannot be allocated, also from Liping Zhang. 9) Use device to route duplicated packets via nft_dup only when set by the user, otherwise packets may not follow the right route, again from Liping. 10) Fix wrong maximum genetlink attribute definition in IPVS, from WANG Cong. 11) Ignore untracked conntrack objects from xt_connmark, from Florian Westphal. 12) Allow to use conntrack helpers that are registered NFPROTO_UNSPEC via CT target, otherwise we cannot use the h.245 helper, from Florian. 13) Revisit garbage collection heuristic in the new workqueue-based timer approach for conntrack to evict objects earlier, again from Florian. 14) Fix crash in nf_tables when inserting an element into a verdict map, from Liping Zhang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09rtnl: reset calcit fptr in rtnl_unregister()Mathias Krause
To avoid having dangling function pointers left behind, reset calcit in rtnl_unregister(), too. This is no issue so far, as only the rtnl core registers a netlink handler with a calcit hook which won't be unregistered, but may become one if new code makes use of the calcit hook. Fixes: c7ac8679bec9 ("rtnetlink: Compute and store minimum ifinfo...") Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09drbd: Fix kernel_sendmsg() usage - potential NULL derefRichard Weinberger
Don't pass a size larger than iov_len to kernel_sendmsg(). Otherwise it will cause a NULL pointer deref when kernel_sendmsg() returns with rv < size. DRBD as external module has been around in the kernel 2.4 days already. We used to be compatible to 2.4 and very early 2.6 kernels, we used to use rv = sock_sendmsg(sock, &msg, iov.iov_len); then later changed to rv = kernel_sendmsg(sock, &msg, &iov, 1, size); when we should have used rv = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); tcp_sendmsg() used to totally ignore the size parameter. 57be5bd ip: convert tcp_sendmsg() to iov_iter primitives changes that, and exposes our long standing error. Even with this error exposed, to trigger the bug, we would need to have an environment (config or otherwise) causing us to not use sendpage() for larger transfers, a failing connection, and have it fail "just at the right time". Apparently that was unlikely enough for most, so this went unnoticed for years. Still, it is known to trigger at least some of these, and suspected for the others: [0] http://lists.linbit.com/pipermail/drbd-user/2016-July/023112.html [1] http://lists.linbit.com/pipermail/drbd-dev/2016-March/003362.html [2] https://forums.grsecurity.net/viewtopic.php?f=3&t=4546 [3] https://ubuntuforums.org/showthread.php?t=2336150 [4] http://e2.howsolveproblem.com/i/1175162/ This should go into 4.9, and into all stable branches since and including v4.0, which is the first to contain the exposing change. It is correct for all stable branches older than that as well (which contain the DRBD driver; which is 2.6.33 and up). It requires a small "conflict" resolution for v4.4 and earlier, with v4.5 we dropped the comment block immediately preceding the kernel_sendmsg(). Fixes: b411b3637fa7 ("The DRBD driver") Cc: <stable@vger.kernel.org> # 2.6.33.x- Cc: viro@zeniv.linux.org.uk Cc: christoph.lechleitner@iteg.at Cc: wolfgang.glas@iteg.at Reported-by: Christoph Lechleitner <christoph.lechleitner@iteg.at> Tested-by: Christoph Lechleitner <christoph.lechleitner@iteg.at> Signed-off-by: Richard Weinberger <richard@nod.at> [changed oneliner to be "obvious" without context; more verbose message] Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-09vxlan: hide unused local variableArnd Bergmann
A bugfix introduced a harmless warning in v4.9-rc4: drivers/net/vxlan.c: In function 'vxlan_group_used': drivers/net/vxlan.c:947:21: error: unused variable 'sock6' [-Werror=unused-variable] This hides the variable inside of the same #ifdef that is around its user. The extraneous initialization is removed at the same time, it was accidentally introduced in the same commit. Fixes: c6fcc4fc5f8b ("vxlan: avoid using stale vxlan socket.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09ibmvnic: Start completion queue negotiation at server-provided optimum valuesJohn Allen
Use the opt_* fields to determine the starting point for negotiating the number of tx/rx completion queues with the vnic server. These contain the number of queues that the vnic server estimates that it will be able to allocate. While renegotiation may still occur, using the opt_* fields will reduce the number of times this needs to happen and will prevent driver probe timeout on systems using large numbers of ibmvnic client devices per vnic port. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09net: icmp_route_lookup should use rt dev to determine L3 domainDavid Ahern
icmp_send is called in response to some event. The skb may not have the device set (skb->dev is NULL), but it is expected to have an rt. Update icmp_route_lookup to use the rt on the skb to determine L3 domain. Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09Merge branch 'qcom-emac-pause'David S. Miller
Timur Tabi says: ==================== net: qcom/emac: ensure that pause frames are enabled The qcom emac driver experiences significant packet loss (through frame check sequence errors) if flow control is not enabled and the phy is not configured to allow pause frames to pass through it. Therefore, we need to enable flow control and force the phy to pass pause frames. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09net: qcom/emac: enable flow control if requestedTimur Tabi
If the PHY has been configured to allow pause frames, then the MAC should be configured to generate and/or accept those frames. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09net: qcom/emac: configure the external phy to allow pause framesTimur Tabi
Pause frames are used to enable flow control. A MAC can send and receive pause frames in order to throttle traffic. However, the PHY must be configured to allow those frames to pass through. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10ACPI / platform: Add support for build-in propertiesHeikki Krogerus
We have a couple of drivers, acpi_apd.c and acpi_lpss.c, that need to pass extra build-in properties to the devices they create. Previously the drivers added those properties to the struct device which is member of the struct acpi_device, but that does not work. Those properties need to be assigned to the struct device of the platform device instead in order for them to become available to the drivers. To fix this, this patch changes acpi_create_platform_device function to take struct property_entry pointer as parameter. Fixes: 20a875e2e86e (serial: 8250_dw: Add quirk for APM X-Gene SoC) Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Yazen Ghannam <yazen.ghannam@amd.com> Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-09ARM: omap3: Add missing memory node in SOM-LVAdam Ford
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi"). commit ("766a1fe78fc3 ARM: omap3: Add missing memory node") had fixes for Torpedo and Overo boards, but this SOM-LV was missed. This should help prevent the DTC warning: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-10Merge branch 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes 3 more amdgpu fixes. * 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux: drm/amd/powerplay: return false instead of -EINVAL drm/amdgpu/powerplay/smu7: fix unintialized data usage drm/amdgpu: fix crash in acp_hw_fini
2016-11-10Merge tag 'drm-intel-fixes-2016-11-09' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes i915 fixes, include Sandybridge rendering regression fix. * tag 'drm-intel-fixes-2016-11-09' of git://anongit.freedesktop.org/drm-intel: drm/i915: Limit Valleyview and earlier to only using mappable scanout drm/i915: Round tile chunks up for constructing partial VMAs drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms drm/i915/dp: BDW cdclk fix for DP audio drm/i915/vlv: Prevent enabling hpd polling in late suspend drm/i915: Respect alternate_ddc_pin for all DDI ports
2016-11-09kbuild: be more careful about matching preprocessed asm ___EXPORT_SYMBOLNicholas Piggin
The CRC code for asm exports grabs the preprocessed asm, finds the ___EXPORT_SYMBOL and turns those into EXPORT_SYMBOL in a C program that can be preprocessed and parsed to create the CRC signatures from the type. The existing regex matching and replacement is too strict, and doesn't deal well with whitespace among other things. The line " EXPORT_SYMBOL(sym)" in a .S file would not match due to initial whitespace, for example, which resulted in x86's ___preempt_schedule failing to get CRCs. Reported-by: Philip Müller <philm@manjaro.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-11-09x86/kexec: add -fno-PIESebastian Andrzej Siewior
If the gcc is configured to do -fPIE by default then the build aborts later with: | Unsupported relocation type: unknown type rel type name (29) Tagging it stable so it is possible to compile recent stable kernels as well. Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-11-09scripts/has-stack-protector: add -fno-PIESebastian Andrzej Siewior
Adding -no-PIE to the fstack protector check. -no-PIE was introduced before -fstack-protector so there is no need for a runtime check. Without it the build stops: |Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: -fstack-protector-strong available but compiler is broken due to -mcmodel=kernel + -fPIE if -fPIE is enabled by default. Tagging it stable so it is possible to compile recent stable kernels as well. Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-11-09x86/cpu: Deal with broken firmware (VMWare/XEN)Thomas Gleixner
Both ACPI and MP specifications require that the APIC id in the respective tables must be the same as the APIC id in CPUID. The kernel retrieves the physical package id from the APIC id during the ACPI/MP table scan and builds the physical to logical package map. The physical package id which is used after a CPU comes up is retrieved from CPUID. So we rely on ACPI/MP tables and CPUID agreeing in that respect. There exist VMware and XEN implementations which violate the spec. As a result the physical to logical package map, which relies on the ACPI/MP tables does not work on those systems, because the CPUID initialized physical package id does not match the firmware id. This causes system crashes and malfunction due to invalid package mappings. The only way to cure this is to sanitize the physical package id after the CPUID enumeration and yell when the APIC ids are different. Fix up the initial APIC id, which is fine as it is only used printout purposes. If the physical package IDs differ yell and use the package information from the ACPI/MP tables so the existing logical package map just works. Chas provided the resulting dmesg output for his affected 4 virtual sockets, 1 core per socket VM: [Firmware Bug]: CPU1: APIC id mismatch. Firmware: 1 CPUID: 2 [Firmware Bug]: CPU1: Using firmware package id 1 instead of 2 .... Reported-and-tested-by: "Charles (Chas) Williams" <ciwillia@brocade.com>, Reported-by: M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Alok Kataria <akataria@vmware.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: #4.6+ <stable@vger,kernel.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1611091613540.3501@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-09Merge tag 'sound-4.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This became a largish pull-request, as we've got a bunch of pending ASoC fixes at this time. One noticeable change is the removal of error directive in uapi/sound/asoc.h. We found that the API has been already used on Chromebooks, so we need to support it even now. A slight big LOC is found in Qualcomm lpass driver, but the rest are all small and easy fixes for ASoC drivers (sti, sun4i, Realtek codecs, Intel, tas571x, etc) in addition to the patches to harden the ALSA core proc file accesses" * tag 'sound-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits) ALSA: info: Return error for invalid read/write ALSA: info: Limit the proc text input size ASoC: samsung: spdif: Fix DMA filter initialization ASoC: sun4i-codec: Enable bus clock after getting GPIO ASoC: lpass-cpu: add module licence and description ASoC: lpass-platform: Fix broken pcm data usage ASoC: sun4i-codec: return error code instead of NULL when create_card fails ASoC: hdmi-codec: Fix hdmi_of_xlate_dai_name when #sound-dai-cells = <0> ASoC: samsung: get access to DMA engine early to defer probe properly ASoC: da7219: Connect output enable register to DAIOUT ASoC: Intel: Skylake: Fix to turn off hdmi power on probe failure ASoC: sti-sas: enable fast io for regmap ASoC: sti: fix channel status update after playback start ASoC: PXA: Brownstone needs I2C ASoC: Intel: Skylake: Always acquire runtime pm ref on unload ASoC: Intel: Atom: add terminate entry for dmi_system_id tables ASoC: rt298: fix jack type detect error ASoC: rt5663: fix a debug statement ASoC: cs4270: fix DAPM stream name mismatch ASoC: Intel: haswell depends on sst-firmware ...
generated by cgit (git 2.34.1) at 2025-09-11 22:50:18 +0000