| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt64 for 6.5 (part 1)
Few improvements following the dt bindings:
- add missing cache properties
- fix nand_controller node name according to YAML
- fix pca954x i2c-mux node names
Fix espressobin-ultra boot failure and wifi for EspressoBIN Ultra
(Armada 3720)
* tag 'mvebu-dt64-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: Fix espressobin-ultra boot failure and wifi
arm64: dts: marvell: Fix pca954x i2c-mux node names
arm64: dts: marvell: cp11x: Fix nand_controller node name according to YAML
arm64: dts: marvell: add missing cache properties
Link: https://lore.kernel.org/r/877cs3h87m.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt for 6.5 (part 1)
Add Endian 4i Edge 200 board (kirkwood based)
Add missing phy-modes on Armada 388 clearfog board
Replace deprecated spi-gpio properties on Armada XP
Align MTD partition nodes to dtschema for all mvebu boards
* tag 'mvebu-dt-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: mvebu: align MTD partition nodes to dtschema
ARM: dts: armada-xp: Replace deprecated spi-gpio properties
ARM: dts: armada388-clearfog: add missing phy-modes
ARM: dts: kirkwood: Add Endian 4i Edge 200 board
Link: https://lore.kernel.org/r/87a5wzh8b1.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt
MT6795:
- add GCE, MMSYS, IOMMU and PMIC wrapper nodes
- Enable PMIC combo, eMMC and SDIO support to the Sony Xperia M5
MT7622:
- add SPI-NAND chip and interrupt support for switch node to the
BPI-R64
MT7986:
- add PWM, thermal, efuse, auxadc and thermal zone nodes
- BPI-R3 enable WiFi leds and enable PWM
- BPI-R3 reserve more space on NOR and NOR flash to be able to store bl2
uncompressed
- BPI-R3 add PWM fan for cpu cooling
MT8173:
- fine tune the regulator of the eDP pannel
- use EDID for eDP panel instead of hard coded type
MT8183:
- add quirk for GIC problem for Kukui based boards to make "pseudo NMIs"
work
- provide fimrware name to SCP
MT8186:
- add USB, SPMI, ADSP, Global Command Engine (GCE) nodes
- add nodes to enable display support
- add cache coherent interconnect
- add dynamic voltage scaling for CPU and GPU
MT8192:
- enable Bluetooth on the Hayato board
- add quirk for GIC problem for Kukui based boards to make "pseudo NMIs"
work
- add cpufreq node and video decoder
- add dma-ranges needed by the IOMMU rework
- Fine tune capacity-dmips-mhz
MT8195:
- add thermal zones and video decoder
- enable PCI ports on cherry (e.g. Acer Chromebook Spin 513 CP513-2H) to
enable WiFi and Bluetooth combo.
- add quirk for GIC problem for Kukui based boards to make "pseudo NMIs"
work
MT8365:
- add watchdog, PMIC, MMC, USB OTG, ethernet nodes
- add Operation Performance Points
- PSCI node and CPU idle support
Several SoCs:
- advertise L2 and L3 cache as unified
- add chasss-type
* tag 'v6.4-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (51 commits)
arm64: dts: mt7986: increase bl2 partition on NAND of Bananapi R3
arm64: dts: mediatek: mt8186: Wire up GPU voltage/frequency scaling
arm64: dts: mediatek: mt8186: Add GPU speed bin NVMEM cells
arm64: dts: mediatek: mt8186: Wire up CPU frequency/voltage scaling
arm64: dts: mediatek: mt8186: Add CCI node and CCI OPP table
arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts
arm64: dts: mt7986: add thermal-zones
arm64: dts: mt7986: add thermal and efuse
arm64: dts: mediatek: mt8192: Fix CPUs capacity-dmips-mhz
arm64: dts: mediatek: mt8192: Add missing dma-ranges to soc node
arm64: dts: mediatek: mt8183: kukui: Add scp firmware-name
arm64: dts: mt8195: Add video decoder node
arm64: dts: mt8192: Add video-codec nodes
arm64: dts: mediatek: Add cpufreq nodes for MT8192
arm64: dts: mediatek: mt8173-elm: remove panel model number in DT
arm64: dts: mt7986: use size of reserved partition for bl2
arm64: dts: mt8173: Power on panel regulator on boot
arm64: dts: mt7986: set Wifi Leds low-active for BPI-R3
arm64: dts: mt7986: add PWM to BPI-R3
arm64: dts: mt7986: add PWM
...
Link: https://lore.kernel.org/r/27843c96-142e-930e-33b2-b634182e7cfa@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
Keystone2 device tree updates for v6.5
Cosmetic cleanups:
* Do not capitalize hex digits
* Unify pinctrl-single pin group nodes for keystone
* Fix eeprom node names
* tag 'ti-keystone-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
ARM: dts: keystone: Do not capitalize hex digits
ARM: dts: keystone: Remove ti,keystone from soc node compatible
ARM: dts: keystone: Fix EEPROM node names
ARM: dts: Unify pinctrl-single pin group nodes for keystone
Link: https://lore.kernel.org/r/20230615164127.qcgwrbwpmclx5wlm@landscape
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Qualcomm ARM32 DeviceTree updates for v6.5
On MSM8960, support for USB is added and the Samsung Galaxy Express is
added.
GPIO keys and on-board LEDs are described for the APQ8074 Dragonboard.
On MSM8226, QFPROM, tsens and thermal zones are defined, and the
description of the clock hierarchy is improved.
The PCIe endpoint controller on SDX55 gains a interconnect path to DDR
defined.
Sony Xperia X2 Tablet and Samsung Galaxy Tab 4 are updated following
changes in the LP855X DeviceTree binding.
* tag 'qcom-dts-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm: dts: qcom: sdx55: Add interconnect path
ARM: dts: qcom: msm8226: Add thermal zones node
ARM: dts: qcom: msm8226: Add tsens node and related nvmem cells
ARM: dts: qcom: msm8226: Add qfprom node
ARM: dts: qcom: pm8941: Add thermal zone config
ARM: dts: qcom: pm8841: Add thermal zone config
ARM: dts: qcom: pm8226: Add thermal sensor and thermal zone config
ARM: dts: qcom: msm8974: rename labels for DSI nodes
ARM: dts: qcom: apq8074-dragonboard: add gpio keys
ARM: dts: qcom: apq8074-dragonboard: add onboard leds
ARM: dts: qcom: Add Samsung Galaxy Express support
ARM: dts: qcom: msm8960: Add USB node
ARM: dts: qcom: adapt to LP855X bindings changes
ARM: dts: qcom: msm8226: Provide clocks to mmcc node
ARM: dts: qcom: msm8226: Use XO from rpmcc where possible
Link: https://lore.kernel.org/r/20230615163926.1462225-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt
MT7530 (e.g. BPI R2):
- several DT clean-ups
- add port5 as CPU port
* tag 'v6.4-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm: dts: mt7623: add port@5 as CPU port
arm: dts: mt7623: enable flow control on port@6
arm: dts: mt7623: change mt7530 switch address
arm: dts: mt7623: add mt7530 switch to mt7623a.dtsi
arm: dts: mt7623: add gmacs to mt7623.dtsi
Link: https://lore.kernel.org/r/98e21acb-d792-6a8c-2de6-12d5af8a8111@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Qualcomm ARM64 DTS changes for v6.5
This introduces support for the Qualcomm SDX75 platform, with the IDP
reference board. On IPQ5332 the RDP474 board is added and on IPQ9574 the
RDP454 is introduced.
On SC8280XP, and hence Lenovo ThinkPad X13s, GPU support is added.
For QDU1000, SDM845, SM670, SC8180X, SM6350 and SM8550 the RSC is added
to the CPU cluster power-domain to flush sleep & wake votes as the
cluster goes down.
On IPQ5332 additional reserved-memory regions to improve post mortem
debugging. UART1 is added. The MI01.2 board is renamed RDP441 and the
RDP474 is added.
On IPQ8074 critical thermal trip points are defined.
As with IPQ5332 additional reserved-memory regions are used to improve
post mortem debugging. Thermal sensors (tsens) are added and zones
defined. The crypto engine is added, and support for the RDP454 board is
added.
Across MSM8916 and MSM8939 pinctrl state definitions are cleaned up and
the purpose of msm8939-pm8916 is documented. MSM8939 has regulator
definitions cleaned up, following to the previous effort on MSM8916.
CPU Bus Fabric scaling support is added to MSM8996 Pro.
On QCM2290 CPU idle states are added.
For QDU1000 SDHCI is introduced and enabled on the IDP to gain eMMC
support. IMEM and PIL information regions are defined for improved post
mortem debugging.
The Qualcomm Robotics RB2 kit gets its on-board buttons described.
A few fixes are introduced for the newly merged SC8180X, in particluar
the DisplayPort blocks are moved to the MMCX power domain to avoid power
being reduced prematurely during boot.
The SC8280XP GPU is added and enabled for the Lenovo Thinkpad X13s,
and resets for the soundwire controllers are added. The OUI is
specified for ethernet phys on SA8540P Ride platform, to avoid reset
issues.
Charger description is added to the PMI8998 PMIC and enabled across
OnePlus 6/6T, SHIFT SHIFT6mq and Xiaomi Pocophone F1.
On SM6350 CPU idle states and UART1 are added. And SM6375 gains GPU
clock controller and IOMMU definitions.
The Fairphone FP4 gains Bluetooth support.
SM8150 is transitioned to use 2 interconnect-cells, and the USB
interconnect path is described to ensure buses are adequately voted for.
The same changes are done for SM8250, and the resolution of the
static framebuffer on Sony Xperia 1 II and 5 II are corrected.
The USB bus paths are also added to SM8350, SM8450 and SM8550.
On SM8550 DisplayPort nodes are added, as is the PWM controller for
driving the notification LED and the RTC is enabled. For the MTP and QRD
boards, the soundcard and audio codecs are defined.
A Tegra change, related to LP855X binding changes, was accidentally
picked up and dropped again later.
A number of DeviceTree fixes identified through validation was
introduced as well. Additionally a few nodes got their default status
changed to avoid unnecessarily having to enable them (e.g. the mdp/dpu
node).
* tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (94 commits)
Revert "arm64: dts: adapt to LP855X bindings changes"
arm64: dts: qcom: sc8280xp: Enable GPU related nodes
arm64: dts: qcom: sc8280xp: Add GPU related nodes
arm64: dts: qcom: msm8939-pm8916: Mark always-on regulators
arm64: dts: qcom: msm8939: Define regulator constraints next to usage
arm64: dts: qcom: msm8939-pm8916: Clarify purpose
arm64: dts: qcom: msm8939: Fix regulator constraints
arm64: dts: qcom: msm8939-sony-tulip: Allow disabling pm8916_l6
arm64: dts: qcom: msm8939-sony-tulip: Fix l10-l12 regulator voltages
arm64: dts: qcom: msm8939: Disable lpass_codec by default
arm64: dts: qcom: msm8939-pm8916: Add missing pm8916_codec supplies
arm64: dts: qcom: qrb4210-rb2: Enable on-board buttons
arm64: dts: qcom: msm8916: Drop msm8916-pins.dtsi
arm64: dts: qcom: msm8916/39: Rename wcnss pinctrl
arm64: dts: qcom: msm8916/39: Cleanup audio pinctrl
arm64: dts: qcom: apq8016-sbc: Drop unneeded MCLK pinctrl
arm64: dts: qcom: msm8916/39: Consolidate SDC pinctrl
arm64: dts: qcom: msm8916/39: Fix SD card detect pinctrl
arm64: dts: qcom: msm8996: rename labels for HDMI nodes
arm64: dts: qcom: sm8250: rename labels for DSI nodes
...
Link: https://lore.kernel.org/r/20230615162043.1461624-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.5
New Boards:
phyBOARD-Lyra-AM625 Board support
Toradex Verdin AM62 COM, carrier and dev boards
New features:
Across K3 SoCs:
- Error Signaling Module(ESM) and Secproxy IPC modules
- On board I2C EEPROM
- Voltage Temp Monitoring (VTM) module
- DM timers (GP Timers)
J784s4:
- R5 and C7x DSP remoteproc, ADC, QSPI
AM69:
- Addition of more peripherals: CPSW, eMMC, UARTs, I2C et al
J721s2:
- USB, Serdes, OSPI, PCIe
AM62a:
- Watchdog
J721e:
- HyperFlash/HyperBus
AM62:
- Type-C USB0 port
Cleanups and non-urgent fixes
Particularly large set of cleanups to get rid of dtbs_check errors and
dtc warnings:
- Addition of missing pinmux and uart nodes for AM64, AM62x, AM62A,
J721e, J7200 that are used by bootloader
- Split Pinmux regions/range to avoid holes for J721s2, J7200, J784s4
- Drop bootargs and unneeded aliases across all K3 SoCs
- Move aliases to board dts files from SoC dtsi files
- Move to generic node name for can, rtc nodes on am65
- s/-pins-default/default-pins/ to match upcoming pinctrl.yaml update
- Fix pinctrl phandle references to use <> as separator where multiple
entries are present
* tag 'ti-k3-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (153 commits)
arm64: dts: ti: Unify pin group node names for make dtbs checks
arm64: dts: ti: add verdin am62 yavia
arm64: dts: ti: add verdin am62 dahlia
arm64: dts: ti: add verdin am62
dt-bindings: arm: ti: add toradex,verdin-am62 et al.
arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625
dt-bindings: arm: ti: Add bindings for PHYTEC AM62x based hardware
arm64: dts: ti: k3-j7200-mcu-wakeup: Remove 0x unit address prefix from nodename
arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom
arm64: dts: ti: k3-am64: Add ESM support
arm64: dts: ti: k3-am62: Add ESM support
arm64: dts: ti: k3-j7200: Add ESM support
arm64: dts: ti: k3-j721e: Add ESM support
dt-bindings: misc: esm: Add ESM support for TI K3 devices
arm64: dts: ti: k3-j721s2-som-p0: Enable wakeup_i2c0 and eeprom
arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmux
arm64: dts: ti: k3-am68-sk-som: Enable wakeup_i2c0 and eeprom
arm64: dts: ti: k3-am68-sk-base-board: Add uart pinmux
arm64: dts: ti: k3-am68-sk-base-board: Add pinmux for RPi Header
arm64: dts: ti: k3-j721s2: Fix wkup pinmux range
...
Link: https://lore.kernel.org/r/7fe0c6de-cb99-9c89-8583-b3855fde16f8@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/dt
arm64: ZynqMP DT changes for v6.5
Various small fixes and cleanups to be aligned with the latest dt-schema.
Other major changes are:
- Wire mali-400 gpu
- Change board name for zcu1275
- Use ethernet-phy-id to handle ETH phy reset properly
- Switch to amd.com emails
- Update people in DT bindings
* tag 'zynqmp-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx: (33 commits)
dt-bindings: usb: xilinx: Replace Manish by Piyush
dt-bindings: xilinx: Remove Rajan, Jolly and Manish
arm64: zynqmp: Used fixed-partitions for QSPI in k26
arm64: zynqmp: Add pmu interrupt-affinity
arm64: zynqmp: Set qspi tx-buswidth to 4
arm64: zynqmp: Fix usb node drive strength and slew rate
arm64: zynqmp: Describe TI phy as ethernet-phy-id
arm64: zynqmp: Switch to amd.com emails
arm64: zynqmp: Convert kv260-revA overlay to ASCII text
dt-bindings: xilinx: Switch xilinx.com emails to amd.com
arm64: xilinx: Use zynqmp prefix for SOM dt overlays
arm64: zynqmp: Add phase tags marking
arm64: zynqmp: Describe bus-width for SD card on KV260
arm64: zynqmp: Enable AMS on SOM and other zcu10x boards
arm64: zynqmp: Enable DP driver for SOMs
arm64: zynqmp: Setup clock for DP and DPDMA
arm64: zynqmp: Switch to ethernet-phy-id in kv260
arm64: zynqmp: Disable USB3.0 for zc1751-xm016-dc2
arm64: zynqmp: Add pinctrl emmc description to SM-K26
arm64: zynqmp: Add gpio labels for modepin gpio
...
Link: https://lore.kernel.org/r/CAHTX3d+2s_KmCnd=x5hydGb+LYoznAzYGTizvqqN2NFmrBurfw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.5
StarFive:
Watchdog nodes for both the JH7110 & its forerunner, the JH7100. PMU, P
being power, support for the JH7110. PMIC and frequency scaling support
for the JH7110 equipped VisionFive 2.
Most of the DT bits for the JH7110, and the SBCs using it, are pending
support for one of the clock controllers, so it's a smaller set of
changes than I would have hoped for.
Misc:
Pick up some dt-binding cleanup that Palmer assigned to me & had no
uptake from the respective maintainers. My powers of estimation failed
me again, with part of my motivation for picking them up being the
addition of new platforms that ended up not making it. Hopefully next
window for those, as they were relatively close.
Exclude the Allwinner and Renesas subdirectories from the Misc.
MAINTAINERS entry, since I do not take care of those.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: Add cpu scaling for JH7110 SoC
riscv: dts: starfive: Enable axp15060 pmic for cpufreq
dt-bindings: interrupt-controller: sifive,plic: Sort compatible values
dt-bindings: timer: sifive,clint: Clean up compatible value section
riscv: dts: starfive: jh7110: Add watchdog node
riscv: dts: starfive: jh7100: Add watchdog node
riscv: dts: starfive: Add PMU controller node
MAINTAINERS: exclude maintained subdirs in RISC-V misc DT entry
Link: https://lore.kernel.org/r/20230612-fasting-floss-0bc05a08bc7a@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
As described in the corresponding binding documentation for
"samsung,exynos850-pmu", the "clocks" property should be used for
specifying CLKOUT mux inputs. Therefore, the clock provided to exynos850
pmu_system_controller is incorrect and should be removed. Instead of
making syscon regmap keep that clock running for PMU accesses, it should
be made always running in the clock driver, because the kernel is not
the only software accessing PMU registers on Exynos850 platform.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20230308233822.31180-8-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230612180102.289745-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards are
- Indiedroid Nova (rk3588)
- Add Edgeble Neural Compute Module 6B (rk3588)
- FriendlyARM NanoPi R2C Plus (rk3328)
- Anbernic RG353PS (rk3566)
- Lunzn Fastrhino R66S / R68S (rk3568)
The rk3588 got a lot of attention and gained support for the GIC ITS
(needed an errata from Rockchip), timers, otp memory, saradc and sdio.
The rk356x got support for its RGA block
With all the core improvements to rk3588 support, the Rock5b got a lot
improvements from that too, namely support for its PMIC, sd-card and
saradc, as well as a clock-rate fix for its es8316 codec.
Similarly the rk3588-evb1 also got support for its PMIC.
The Anberic RGxx3 series got a better bluetooth compatible and updates
to its LEDs to make them use the PWM blocks they're connected to.
* tag 'v6.5-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits)
arm64: dts: rockchip: Add saradc node to rock5b
arm64: dts: rockchip: Fix compatible for Bluetooth on rk3566-anbernic
arm64: dts: rockchip: Add SD card support to rock-5b
arm64: dts: rockchip: add PMIC to rock-5b
arm64: dts: rockchip: Assign ES8316 MCLK rate on rk3588-rock-5b
arm64: dts: rockchip: Add Indiedroid Nova board
dt-bindings: arm: rockchip: Add Indiedroid Nova
dt-bindings: vendor-prefixes: add Indiedroid
arm64: dts: rockchip: Add sdio node to rk3588
arm64: dts: rockchip: add default pinctrl for rk3588 emmc
arm64: dts: rockchip: Add DT node for ADC support in RK3588
arm64: dts: rockchip: add PMIC to rk3588-evb1
arm64: dts: rockchip: Add rk3588 Edgeble Neu6 Model B IO
arm64: dts: rockchip: Add rk3588 Edgeble Neu6 Model B SoM
arm64: dts: rockchip: Add Rockchip RK3588J
dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 6B
arm64: dts: rockchip: Add RGA2 support to rk356x
media: dt-bindings: media: rockchip-rga: add rockchip,rk3568-rga
arm64: dts: rockchip: Add rk3588 OTP node
arm64: dts: rockchip: Add FriendlyARM NanoPi R2C Plus
...
Link: https://lore.kernel.org/r/3239799.44csPzL39Z@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM32 DeviceTree updates for v6.5
NAND support on IPQ4019 boards is restored, after a faulty node rename.
On MSM8226 IMEM, PMU and RPM stats are introduced. The Huawei Watch
gains vibrator support.
On MSM8974, the LGE Nexus 5 gains vibrator support. The APQ8074
Dragonboard marks BLSP2 BAM controlled remotely, DSI panel, audio and
modem DSPs are enabled.
On SDX65 PCIe controller and PHY are introduced, to provide endpoint
functionality. This is enabled on the related MTP.
A range of DeviceTree cleanups are also included.
* tag 'qcom-dts-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits)
ARM: dts: qcom: apq8074-dragonboard: enable DSI panel
ARM: dts: qcom: apq8074-dragonboard: enable adsp and MSS
ARM: dts: qcom: apq8074-dragonboard: Set DMA as remotely controlled
ARM: dts: qcom: apq8026-huawei-sturgeon: Add vibrator
ARM: dts: qcom: msm8226: Add IMEM node
ARM: dts: qcom: msm8226: Add rpm-stats device node
ARM: dts: qcom: msm8226: Add PMU node
ARM: dts: qcom: sdx65-mtp: Enable PCIe EP
ARM: dts: qcom: sdx65-mtp: Enable PCIe PHY
ARM: dts: qcom: sdx65: Add support for PCIe EP
ARM: dts: qcom: sdx65: Add support for PCIe PHY
ARM: dts: qcom: msm8974: align WCNSS Bluetooth node name with bindings
ARM: dts: qcom: apq8084: correct thermal sensor unit-address
ARM: dts: qcom: msm8960-cdp: move regulator out of simple-bus
ARM: dts: qcom: apq8060-dragonboard: move regulators out of simple-bus
ARM: dts: qcom: ipq8064: align USB node names with bindings
ARM: dts: qcom: ipq8064: correct LED node names
ARM: dts: qcom: ipq8064: drop invalid GCC thermal-sensor unit-address
ARM: dts: qcom: ipq8064: drop leading 0 from unit-address
ARM: dts: qcom: msm8974: correct pronto unit-address
...
Link: https://lore.kernel.org/r/20230611010843.2482142-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When deleting a base chain, iptables-nft simply submits the whole chain
to the kernel, including the NFTA_CHAIN_HOOK attribute. The new code
added by fixed commit then turned this into a chain update, destroying
the hook but not the chain itself. Detect the situation by checking if
the chain type is either netdev or inet/ingress.
Fixes: 7d937b107108f ("netfilter: nf_tables: support for deleting devices in an existing netdev chain")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Move the alias from xt_osf to nfnetlink_osf.
Fixes: f9324952088f ("netfilter: nfnetlink_osf: extract nfnetlink_subsystem code from xt_osf.c")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Otherwise the module reference counter is leaked.
Fixes b9703ed44ffb ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Never used from userspace, disallow these parameters.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Disallow updates of set timeout and garbage collection parameters for
anonymous sets.
Fixes: 123b99619cca ("netfilter: nf_tables: honor set timeout and garbage collection updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use binding list to track set transaction and to check for unbound
chains before entering the commit phase.
Bail out if chain binding remain unused before entering the commit
step.
Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a new list to track set transaction and to check for unbound
anonymous sets before entering the commit phase.
Bail out at the end of the transaction handling if an anonymous set
remains unbound.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.5
This introduces the RDP442 and RDP433 reference devices on IPQ5332 and
IPQ9574, respectively. RDP418, RDP433, RDP449 and RDP453 on the IPQ9574
are added. On MSM8939 the Square T2 board and the Sony Xperia M4 Aqua is
added. Support for Acer Apire 1, built on the Snapdragon 7c platform is
introduced. Fxtec Pro1X on SM6115 is added. Lastly long floating
support for SC8180X and the Lenovo Flex 5G, and the Primus reference
device, has been added.
On IPQ5332 and IPQ6018 QFPROM support is introduced, and as described
above the RDP442 board on the prior. Download mode support and various
reserved-memory regions are also introduced on IPQ6018.
IPQ8074 gains another SPI controller.
On IPQ9574 CPU frequency scaling, low speed busses, RNG, Watchdog,
qfprom, SMEM and RPM are introduced. As are support for four new board,
mentioned above.
MSM8916 gains a range of structural improvements, to better suite the
various boards supported. Regulator constraints are corrected and their
states are adjusted to match reality (e.g. always-on regulators marked
as always-on). BQ Aquaris X5 gains support for front flash LED.
As mentioned above, MSM8939 support is introduced with support for
boards from Sony and Square.
MSM8953 gains DMA support in I2C masters.
MSM8996-based Sony Xperia boards gains description of their RGB
notification LED.
On SA8775P support for UFS, USB, GPU clock and iommu controllers, PMU,
AOSS, watchdog and missing low-speed controllers are added. On the Ride
platform UFS, USB and an i2c bus are enabled.
iommu properties are added to QSPI on both SC7180 and SC7280. LPASS
clocks are adjusted and MDP node cleaned up slightly, on SC7180. As
mentioned above, support for Acer Aspire 1 is introduced.
Long lingering patches introducing SC8180X, the Lenovo Flex 5G and the
Primus reference device has been merged.
On SC8280XP ethernet is added and enabled on the automotive ride
platform. An SDC controller is introduced and enabled on the SC8280XP
CRD. On the Lenovo Thinkpad X13s and the CRD reference device the USB
SuperSpeed phy is added to the Type-C graph, to enable support for
orientation switching.
Fairphone 3 gains support for its notification LED.
On SDM845 the iommu stream for QSPI is defined, SHIFT SHIFT6mq gains
support for flash LED and the RB3 (DB845c) board gains support for
bonded/dual DSI-mode, to allow 4k output.
On SM6115 CPU idle-states, crypto engine support and SuperSpeed USB PHY
are introduced. As mentioned above Fxtec Pro1X is introduced. On the
QRB4210 Robotics Platform RB2 USB, Audio and Compute DSPs, display,
CAN-bus and GPIO LEDs are introduced, fixed regulators are described and
the SD-card description is corrected.
Support for crypto engine is added to SM8150, while Sony Xperia 1 and 5
gains SD-card support, camera regulators and GPIO line names sorted out.
SM8250 also gets support for crypto engine, and Sony Xperia 1 II and 5
II gains support for hardware video accelerator.
Crypto engine is introduced for SM8350 as well. The HDK gets the USB
Type-C graph described for Superspeed orientation switching and
DisplayPort output.
On SM8450 video clock controller and crypto engine are added, missing
opp levels are introduced and the USB Type-C graph is defined for
orientation switching and altmode.
SM8550 gains GPU and video clock controllers and missing opp levels are
added. The WCD9385 audio codec is added for the SM8550 MTP and on the
QRD PCIe, USB, audio display and flash LED are added.
* tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (195 commits)
arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G
arm64: dts: qcom: sc8180x: Introduce Primus
arm64: dts: qcom: sc8180x: Add pmics
arm64: dts: qcom: sc8180x: Add display and gpu nodes
arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes
arm64: dts: qcom: sc8180x: Add PCIe instances
arm64: dts: qcom: sc8180x: Add QUPs
arm64: dts: qcom: sc8180x: Add thermal zones
arm64: dts: qcom: sc8180x: Add interconnects and lmh
arm64: dts: qcom: Introduce the SC8180x platform
arm64: dts: qcom: msm8916: Move aliases to boards
arm64: dts: qcom: pm8916: Rename &wcd_codec -> &pm8916_codec
arm64: dts: qcom: msm8916/39: Clean up MDSS labels
arm64: dts: qcom: msm8916/39: Use consistent name for I2C/SPI pinctrl
arm64: dts: qcom: msm8916/39: Rename &blsp1_uartN -> &blsp_uartN
arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm
arm64: dts: qcom: qrb4210-rb2: Enable USB node
arm64: dts: qcom: sm6115: Add USB SS qmp phy node
arm64: dts: qcom: ipq5332: add support for the RDP442 variant
dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 family
...
Link: https://lore.kernel.org/r/20230611004944.2481596-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Anonymous sets come with NFT_SET_CONSTANT from userspace. Although API
allows to create anonymous sets without NFT_SET_CONSTANT, it makes no
sense to allow to add and to delete elements for bound anonymous sets.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Since ("netfilter: nf_tables: drop map element references from
preparation phase"), integration with commit protocol is better,
therefore drop the workaround that b91d90368837 ("netfilter: nf_tables:
fix leaking object reference count") provides.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The .walk callback iterates over the current active set, but it might be
useful to iterate over the next generation set. Use the generation mask
to determine what set view (either current or next generation) is use
for the walk iteration.
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
set .destroy callback releases the references to other objects in maps.
This is very late and it results in spurious EBUSY errors. Drop refcount
from the preparation phase instead, update set backend not to drop
reference counter from set .destroy path.
Exceptions: NFT_TRANS_PREPARE_ERROR does not require to drop the
reference counter because the transaction abort path releases the map
references for each element since the set is unbound. The abort path
also deals with releasing reference counter for new elements added to
unbound sets.
Fixes: 591054469b3e ("netfilter: nf_tables: revisit chain/object refcounting from elements")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a new state to deal with rule expressions deactivation from the
newrule error path, otherwise the anonymous set remains in the list in
inactive state for the next generation. Mark the set/chain transaction
as unbound so the abort path releases this object, set it as inactive in
the next generation so it is not reachable anymore from this transaction
and reference counter is dropped.
Fixes: 1240eb93f061 ("netfilter: nf_tables: incorrect error path handling with NFT_MSG_NEWRULE")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add bound flag to rule and chain transactions as in 6a0a8d10a366
("netfilter: nf_tables: use-after-free in failing rule with bound set")
to skip them in case that the chain is already bound from the abort
path.
This patch fixes an imbalance in the chain use refcnt that triggers a
WARN_ON on the table and chain destroy path.
This patch also disallows nested chain bindings, which is not
supported from userspace.
The logic to deal with chain binding in nft_data_hold() and
nft_data_release() is not correct. The NFT_TRANS_PREPARE state needs a
special handling in case a chain is bound but next expressions in the
same rule fail to initialize as described by 1240eb93f061 ("netfilter:
nf_tables: incorrect error path handling with NFT_MSG_NEWRULE").
The chain is left bound if rule construction fails, so the objects
stored in this chain (and the chain itself) are released by the
transaction records from the abort path, follow up patch ("netfilter:
nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain")
completes this error handling.
When deleting an existing rule, chain bound flag is set off so the
rule expression .destroy path releases the objects.
Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree for 6.5:
- New board support: i.MX8MM based Emtop SoM & Baseboard, NXP i.MX8MM EVKB
board, i.MX8MP based Gateworks Venice gw7905-2x device.
- A series from Adam Ford to add Camera and Audio support for i.MX8M
based Beacon boards.
- Add Audio output support for i.MX8MP TQMa8MPxL/MBa8MPxL board.
- Add HDMI and display support for imx8mm-evk and imx8mm-phg board.
- Add coresight trace devices support for i.MX8MP SoC.
- A couple of changes from Krzysztof Kozlowski to add missing cache
properties.
- A couple of changes from Laurent Pinchart to add CSIS and ISI devices
for i.MX8MP SoC.
- A series from Marek Vasut to add more devices for i.MX8MP, and enable
SAI audio on i.MX8MP DHCOM PDK2 and PDK3.
- Correct GSC vdd_bat data size for Gateworks Venice devices.
- Add more device support for i.MX93, Watchdog, OCOTP, idle states, DDR
performance monitor, etc.
- Small and random clean-ups and device node additions.
* tag 'imx-dt64-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits)
arm64: dts: imx8mq: Pass address-cells/size-cells to mipi_dsi
arm64: dts: imx8mq: Use 'dsi' as node name
arm64: dts: imx8mp-venice-gw702x: fix GSC vdd_bat data size
arm64: dts: imx8mq-tqma8mq-mba8mx: Remove invalid properties
arm64: dts: imx8mq: Add missing pci property
arm64: dts: imx8mq: Fix lcdif clocks
arm64: dts: imx8mq: Fix lcdif compatible
arm64: dts: imx8mp: don't initialize audio clocks from CCM node
arm64: dts: imx8mm-venice: Fix GSC vdd_bat data size.
arm64: dts: imx8mp: Add coresight trace components
arm64: dts: imx93: add ddr performance monitor node
arm64: dts: imx8mm-phg: Add display support
arm64: dts: tqma8mqml: Add vcc supply to i2c eeproms
arm64: dts: imx8mm-evk: Add HDMI support
arm64: dts: imx8mn-var-som-symphony: adapt FEC pinctrl for SOMs with onboard PHY
arm64: dts: imx8mn-var-som: add 20ms delay to ethernet regulator enable
arm64: dts: imx8mp-msc-sm2s: Add sound card
arm64: dts: imx8mn-beacon: Migrate sound card to simple-audio-card
arm64: dts: imx8mp-beacon-kit: Enable WM8962 Audio CODEC
arm64: dts: imx93: add fsl,stop-mode property to support WOL
...
Link: https://lore.kernel.org/r/20230610072530.418847-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree for 6.5:
- New board support: Marantec Maveo Box.
- Add HDMI support for TQMa6x/MBa6 board.
- A series from Andrew Lunn to add phy-mode and fixed links for Ethernet
devices on imx51, imx6qdl and vf610.
- A bunch of changes from Fabio Estevam to clean up deprecated and
invalid properies, fix up node names to remove dt-schema warnings.
- A series of maintenance updates for Protonic Holland boards, mostly
on the USB subsystem configuration, thermal zones, and the naming of
GPIO keys.
- Update dma-apbh device node name to remove dtbs_check warnings.
- Remove invalid nodes from fan-controller for a couple of Gateworks
boards.
- Small random updates and clean-ups on various boards.
* tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits)
ARM: dts: imx6qdl: vicut1: rename power to power-button
ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings
ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG port
ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG port
ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG port
ARM: dts: imx6dl: prtmvt: fix different USB related warnings
ARM: dts: imx6dl: alti6p: fix different USB related warnings
ARM: dts: imx6dl: vicut1: Address USB related warnings
ARM: dts: imx6dl: Add trip points to thermal zones on several devices
ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG node
ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes
ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and MDC
ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion
ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65
ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97
ARM: dts: imx: Use 'eeprom' as node name
ARM: dts: imx6ul-ccimx6ulsom: Fix the "coin" regulator name
ARM: dts: imx: Use 'pmic' as node name
ARM: dts: imx6: Use the mux- prefix
ARM: dts: imx7d-sdb: Allow UHS modes
...
Link: https://lore.kernel.org/r/20230610072530.418847-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings for 6.5:
- Add vendor prefix for Emtop
- Compatibles for Marantec Maveo Box, i.MX8MM-EVKB and GW7905-2x board.
- Replace tab indent with spaces in fsl.yaml.
* tag 'imx-bindings-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: Add Gateworks i.MX8M GW7905-2x board
dt-bindings: arm: fsl: Fix syntax error
dt-bindings: vendor-prefixes: Add Emtop
dt-bindings: arm: fsl: Add Emtop SoM & Baseboard
dt-bindings: arm: fsl: Add i.MX8MM-EVKB
dt-bindings: arm: fsl: Add Marantec maveo box as a DHCOR i.MX6ULL SoM based board
Link: https://lore.kernel.org/r/20230610072530.418847-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- fix DCLK clock names
- new board ICnova A20 ADB4006
- add D1 SPI node
- add bluetooth node for chip board
- add extra mmc2 pinmux to sun5i
- add axp209 iio-hwmon node
* tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: axp209: Add iio-hwmon node for internal temperature
ARM: dts: sun5i: Add port E pinmux settings for mmc2
ARM: dts: sun5i: chip: Enable bluetooth
riscv: dts: allwinner: d1: Add SPI controllers node
arm: dts: sunxi: Add ICnova A20 ADB4006 board
dt-bindings: arm: sunxi: add ICnova A20 ADB4006 binding
ARM: dts: sunxi: rename tcon's clock output
Link: https://lore.kernel.org/r/20230609210452.GA17638@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
Direct replacement is safe here since return value from all
callers of STRLCPY macro were ignored.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230613003437.3538694-1-azeemshaikh38@gmail.com
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230614003604.1021205-1-azeemshaikh38@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.5-rc1
This introduces support for the IGX Orin and Jetson Orin Nano devices
and enables various additional features on the Jetson AGX Orin and
Jetson Orin NX. This also enables some basic thermal support to prevent
the devices from overheating.
Support for the GPU on the Google Pixel C is enabled and various minor
issues are fixed and cleaned up.
* tag 'tegra-for-6.5-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable thermal support on Jetson Orin Nano
arm64: tegra: Enable thermal support on Jetson Orin NX
arm64: tegra: Enable thermal support on Jetson AGX Orin
arm64: tegra: Add Tegra234 thermal support
arm64: tegra: Add a few blank lines for better readability
arm64: tegra: Sort properties more logically
arm64: tegra: Enable GPU on Smaug
arm64: tegra: Add GPU power rail regulator on Smaug
arm64: tegra: Update USB phy-name for Jetson Orin NX
arm64: tegra: Enable USB device for Jetson AGX Orin
arm64: tegra: Add Tegra234 pin controllers
arm64: tegra: Support Jetson Orin Nano Developer Kit
arm64: tegra: Add missing cache properties on Tegra210
arm64: tegra: Fix PCIe regulator for Orin Jetson AGX
arm64: tegra: Add CPU OPP tables and interconnects property
arm64: tegra: Add support for IGX Orin
Link: https://lore.kernel.org/r/20230609193620.2275240-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.5-rc1
Several new modules and devices are documented and fixes incorporated
for the Tegra234 GPIO controller pin mappings as well as the possible
Tegra XUDC PHY connections.
* tag 'tegra-for-6.5-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: tegra: Document Jetson Orin Nano Developer Kit
dt-bindings: tegra: Document Jetson Orin Nano
dt-bindings: gpio: Remove FSI domain ports on Tegra234
dt-bindings: usb: tegra-xudc: Remove extraneous PHYs
dt-bindings: tegra: Add ICC IDs for dummy memory clients
dt-bindings: tegra: Document compatible for IGX
Link: https://lore.kernel.org/r/20230609193620.2275240-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.5, round 1
Highlights:
----------
- MCU/MPU:
- Replace deprecated st,hw-flow-ctrl by uart-has-rtscts.
- Fix LTDC/DSI warnings.
- MPU:
- STMP32MP15:
- Add OTP part number and Vrefint calibration in bsec.
- M4 hold management updated. As SMC call is deprecated,
the service is moved on a SCMI service.
- Add ADC internal channels (VREFINT/VDDCORE).
- ST:
- Enable ADC1&2 on STM32MP15 DKx boards.
- Adopt generic IIO bindings on STM32MP157C ED1
- Add supplies for OV5640 in STM32MP157C EV1
to fix yaml validation.
- Fix i2s bindings to match with the YAML validation (DKx boards).
- DH:
- Rearrange MAC EEPROM.
- Rename AV96 sound card.
- Adopt generic IIo bindings.
- Fix audio routing.
-PHYTEC:
- Add PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM.
This SOM embeds up to 1GB DDR3LP RAM, up to 1GB eMMC,
up to 16 MB QSPI and up to 128 GB NAND flash.
* tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits)
ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx
ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1
ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems
ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench
ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc
ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon
ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1
ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards
ARM: dts: stm32: add vrefint support to adc2 on stm32mp15
ARM: dts: stm32: add vrefint calibration on stm32mp15
ARM: dts: stm32: add adc internal channels to stm32mp15
ARM: dts: stm32: fix ltdc warnings in stm32mp15 boards
ARM: dts: stm32: fix dsi warnings on stm32mp15 boards
dt-bindings: display: st,stm32-dsi: Remove unnecessary fields
ARM: dts: stm32: fix warnings on stm32f469-disco board
ARM: dts: stm32: Shorten the AV96 HDMI sound card name
ARM: dts: stm32: fix m4_rproc references to use SCMI for stm32mp15
ARM: dts: stm32: Update Cortex-M4 reset declarations on stm32mp15
ARM: dts: stm32: add STM32MP1-based Phytec board
...
Link: https://lore.kernel.org/r/08d711de-bb6d-a976-735b-5e18b19818ea@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The max_raw_write member of the regmap_spi_avmm_bus structure is defined
as:
.max_raw_write = SPI_AVMM_VAL_SIZE * MAX_WRITE_CNT
SPI_AVMM_VAL_SIZE == 4 and MAX_WRITE_CNT == 1 so this results in a
maximum write transfer size of 4 bytes which provides only enough space to
transfer the address of the target register. It provides no space for the
value to be transferred. This bug became an issue (divide-by-zero in
_regmap_raw_write()) after the following was accepted into mainline:
commit 3981514180c9 ("regmap: Account for register length when chunking")
Change max_raw_write to include space (4 additional bytes) for both the
register address and value:
.max_raw_write = SPI_AVMM_REG_SIZE + SPI_AVMM_VAL_SIZE * MAX_WRITE_CNT
Fixes: 7f9fb67358a2 ("regmap: add Intel SPI Slave to AVMM Bus Bridge support")
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20230620202824.380313-1-russell.h.weight@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/newsoc
STM32 STM32MP25 for v6.5, round 1
Highlights:
----------
STM32MP25 family is composed of 4 SoCs defined as following:
-STM32MP251: common part composed of 1*Cortex-A35,
common peripherals like SDMMC, UART, SPI, I2C, PCIe, USB3,
parallel and DSI display, 1*ETH ...
-STM32MP253: STM32MP251 + 1*Cortex-A35 (dual CPU), a second ETH,
CAN-FD and LVDS display.
-STM32MP255: STM32MP253 + GPU/AI and video encode/decode.
-STM32MP257: STM32MP255 + ETH TSN switch (2+1 ports).
A second diversity layer exists for security features/A35 frequency:
-STM32MP25xY, "Y" gives information:
-Y = A means A35@1.2GHz + no cryp IP and no secure boot.
-Y = C means A35@1.2GHz + cryp IP and secure boot.
-Y = D means A35@1.5GHz + no cryp IP and no secure boot.
-Y = F means A35@1.5GHz + cryp IP and secure boot.
This PR adds the STM32MP257F EV1 board support. This board embeds a
STM32MP257FAI SoC, with 4GB of DDR4, TSN switch (2+1 ports),
2*USB typeA, 1*USB2 typeC, SNOR OctoSPI, mini PCIe, STPMIC2 for power distribution ...
* tag 'stm32-mp25-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (44 commits)
MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE
arm64: defconfig: enable ARCH_STM32 and STM32 serial driver
arm64: dts: st: add stm32mp257f-ev1 board support
dt-bindings: stm32: document stm32mp257f-ev1 board
arm64: dts: st: introduce stm32mp25 pinctrl files
arm64: dts: st: introduce stm32mp25 SoCs family
arm64: introduce STM32 family on Armv8 architecture
dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon
pinctrl: stm32: add stm32mp257 pinctrl support
dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages
ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx
ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1
ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems
ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench
ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc
ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon
ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1
ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards
ARM: dts: stm32: add vrefint support to adc2 on stm32mp15
...
Link: https://lore.kernel.org/r/080fc303-45c1-6cc0-4c5e-694e730896a6@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Amiga partition parser module uses signed int for partition sector
address and count, which will overflow for disks larger than 1 TB.
Use u64 as type for sector address and size to allow using disks up to
2 TB without LBD support, and disks larger than 2 TB with LBD. The RBD
format allows to specify disk sizes up to 2^128 bytes (though native
OS limitations reduce this somewhat, to max 2^68 bytes), so check for
u64 overflow carefully to protect against overflowing sector_t.
Bail out if sector addresses overflow 32 bits on kernels without LBD
support.
This bug was reported originally in 2012, and the fix was created by
the RDB author, Joanne Dow <jdow@earthlink.net>. A patch had been
discussed and reviewed on linux-m68k at that time but never officially
submitted (now resubmitted as patch 1 in this series).
This patch adds additional error checking and warning messages.
Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=43511
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Message-ID: <201206192146.09327.Martin@lichtvoll.de>
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/r/20230620201725.7020-4-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The Amiga partition parser module uses signed int for partition sector
address and count, which will overflow for disks larger than 1 TB.
Use u64 as type for sector address and size to allow using disks up to
2 TB without LBD support, and disks larger than 2 TB with LBD. The RBD
format allows to specify disk sizes up to 2^128 bytes (though native
OS limitations reduce this somewhat, to max 2^68 bytes), so check for
u64 overflow carefully to protect against overflowing sector_t.
This bug was reported originally in 2012, and the fix was created by
the RDB author, Joanne Dow <jdow@earthlink.net>. A patch had been
discussed and reviewed on linux-m68k at that time but never officially
submitted (now resubmitted as patch 1 of this series).
Patch 3 (this series) adds additional error checking and warning
messages. One of the error checks now makes use of the previously
unused rdb_CylBlocks field, which causes a 'sparse' warning
(cast to restricted __be32).
Annotate all 32 bit fields in affs_hardblocks.h as __be32, as the
on-disk format of RDB and partition blocks is always big endian.
Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=43511
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Message-ID: <201206192146.09327.Martin@lichtvoll.de>
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230620201725.7020-3-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The Amiga partition parser module uses signed int for partition sector
address and count, which will overflow for disks larger than 1 TB.
Use sector_t as type for sector address and size to allow using disks
up to 2 TB without LBD support, and disks larger than 2 TB with LBD.
This bug was reported originally in 2012, and the fix was created by
the RDB author, Joanne Dow <jdow@earthlink.net>. A patch had been
discussed and reviewed on linux-m68k at that time but never officially
submitted. This patch differs from Joanne's patch only in its use of
sector_t instead of unsigned int. No checking for overflows is done
(see patch 3 of this series for that).
Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=43511
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Message-ID: <201206192146.09327.Martin@lichtvoll.de>
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Martin Steigerwald <Martin@lichtvoll.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230620201725.7020-2-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
I've been experiencing some intermittent crashes down in the display
driver code. The symptoms are ususally a line like this in dmesg:
amdgpu 0000:30:00.0: [drm] Failed to create MST payload for port 000000006d3a3885: -5
...followed by an Oops due to a NULL pointer dereference.
Switch to using mgr->dev instead of state->dev since "state" can be
NULL in some cases.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2184855
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230419112447.18471-1-jlayton@kernel.org
|
|
PCIe r6.0.1, sec 7.5.3.7, recommends setting the link control parameters,
then waiting for the Link Training bit to be clear before setting the
Retrain Link bit.
This avoids a race where the LTSSM may not use the updated parameters if it
is already in the midst of link training because of other normal link
activity.
Wait for the Link Training bit to be clear before toggling the Retrain Link
bit to ensure that the LTSSM uses the updated link control parameters.
[bhelgaas: commit log, return 0 (success)/-ETIMEDOUT instead of bool for
both pcie_wait_for_retrain() and the existing pcie_retrain_link()]
Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support")
Link: https://lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
|
|
Factor pcie_wait_for_retrain() out from pcie_retrain_link(). No functional
change intended.
[bhelgaas: split out from
https://lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
"pcie_retrain_link" is not a question with a true/false answer, so "bool"
isn't quite the right return type. Return 0 for success or -ETIMEDOUT if
the retrain failed. No functional change intended.
[bhelgaas: based on Ilpo's patch below]
Link: https://lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
While trying to fix the jfs UBSAN problem reported in syzkaller,
(https://syzkaller.appspot.com/bug?id=01abadbd6ae6a08b1f1987aa61554c6b3ac19ff2)
I found the typo in the comment of dbInitTree function and fix it.
Signed-off-by: Wonguk Lee <wonguk.lee1023@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Perf gets the number of supported counters from SBI. If it happens that
the number of returned counters more than RISCV_MAX_COUNTERS the code
trusts it. It does not lead to an immediate problem but can potentially
lead to it. Prevent getting more than RISCV_MAX_COUNTERS from SBI.
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20230505072058.1049732-1-v.v.mitrofanov@yadro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
clk_hw_register_fixed_rate_parent_data() 3rd parameter is parent_data
not parent_hw. Inner function (__clk_hw_register_fixed_rate()) is called
with parent_data parameter as valid. To have this parameter taken into
account update the name of the 3rd parameter of
clk_hw_register_fixed_rate_parent_data() macro to parent_data.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230615101931.581060-1-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add support for AX1690i and AX1690s devices with
PCIE id 0x7AF0.
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230619150233.461290-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have seen a bug where the NIC incorrectly changes the length in the
IP header of a padded packet to include the padding bytes. The driver
already has a workaround for this so do the workaround for this NIC too.
This resolves the issue.
The NIC in question identifies itself as follows:
[ 8.828494] be2net 0000:02:00.0: FW version is 10.7.110.31
[ 8.834759] be2net 0000:02:00.0: Emulex OneConnect(be3): PF FLEX10 port 1
02:00.0 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 01)
Fixes: ca34fe38f06d ("be2net: fix wrong usage of adapter->generation")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Link: https://lore.kernel.org/r/20230616164549.2863037-1-ross.lagerwall@citrix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
