summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-20ptp: ocp: Add .getmaxphase ptp_clock_info callbackRahul Rameshbabu
Add a function that advertises a maximum offset of zero supported by ptp_clock_info .adjphase in the OCP null ptp implementation. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20ptp: idt82p33: Add .getmaxphase ptp_clock_info callbackRahul Rameshbabu
Advertise the maximum offset the .adjphase callback is capable of supporting in nanoseconds for IDT devices. Refactor the negation of the offset stored in the register to be after the boundary check of the offset value rather than before. Boundary check based on the intended value rather than its device-specific representation. Depend on ptp_clock_adjtime for handling out-of-range offsets. ptp_clock_adjtime returns -ERANGE instead of clamping out-of-range offsets. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Min Li <min.li.xe@renesas.com> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20ptp: ptp_clockmatrix: Add .getmaxphase ptp_clock_info callbackRahul Rameshbabu
Advertise the maximum offset the .adjphase callback is capable of supporting in nanoseconds for IDT ClockMatrix devices. Depend on ptp_clock_adjtime for handling out-of-range offsets. ptp_clock_adjtime returns -ERANGE instead of clamping out-of-range offsets. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20net/mlx5: Add .getmaxphase ptp_clock_info callbackRahul Rameshbabu
Implement .getmaxphase callback of ptp_clock_info in mlx5 driver. No longer do a range check in .adjphase callback implementation. Handled by the ptp stack. Cc: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20ptp: Add .getmaxphase callback to ptp_clock_infoRahul Rameshbabu
Enables advertisement of the maximum offset supported by the phase control functionality of PHCs. The callback is used to return an error if an offset not supported by the PHC is used in ADJ_OFFSET. The ioctls PTP_CLOCK_GETCAPS and PTP_CLOCK_GETCAPS2 now advertise the maximum offset a PHC's phase control functionality is capable of supporting. Introduce new sysfs node, max_phase_adjustment. Cc: Jakub Kicinski <kuba@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20testptp: Add support for testing ptp_clock_info .adjphase callbackRahul Rameshbabu
Invoke clock_adjtime syscall with tx.modes set with ADJ_OFFSET when testptp is invoked with a phase adjustment offset value. Support seconds and nanoseconds for the offset value. Cc: Jakub Kicinski <kuba@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20testptp: Remove magic numbers related to nanosecond to second conversionRahul Rameshbabu
Use existing NSEC_PER_SEC declaration in place of hardcoded magic numbers. Cc: Jakub Kicinski <kuba@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20docs: ptp.rst: Add information about NVIDIA Mellanox devicesRahul Rameshbabu
The mlx5_core driver has implemented ptp clock driver functionality but lacked documentation about the PTP devices. This patch adds information about the Mellanox device family. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20ptp: Clarify ptp_clock_info .adjphase expects an internal servo to be usedRahul Rameshbabu
.adjphase expects a PHC to use an internal servo algorithm to correct the provided phase offset target in the callback. Implementation of the internal servo algorithm are defined by the individual devices. Cc: Jakub Kicinski <kuba@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20drm/i915: Fix a NULL vs IS_ERR() bugDan Carpenter
The mmap_offset_attach() function returns error pointers, it doesn't return NULL. Fixes: eaee1c085863 ("drm/i915: Add a function to mmap framebuffer obj") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZH7tHLRZ9oBjedjN@moroto (cherry picked from commit 3a89311387cde27da8e290458b2d037133c1f7b5) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2023-06-20drm/i915: make i915_drm_client_fdinfo() reference conditional againArnd Bergmann
The function is only defined if CONFIG_PROC_FS is enabled: ld.lld: error: undefined symbol: i915_drm_client_fdinfo >>> referenced by i915_driver.c >>> drivers/gpu/drm/i915/i915_driver.o:(i915_drm_driver) in archive vmlinux.a Use the PTR_IF() helper to make the reference NULL otherwise. Fixes: e894b724c316d ("drm/i915: Use the fdinfo helper") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230616093158.3568480-1-arnd@kernel.org (cherry picked from commit 8084c63743a88472af0a34ba209eebf9caea1dae) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2023-06-20drm/i915/huc: Fix missing error code in intel_huc_init()Harshit Mogalapalli
Smatch warns: drivers/gpu/drm/i915/gt/uc/intel_huc.c:388 intel_huc_init() warn: missing error code 'err' When the allocation of VMAs fail: The value of err is zero at this point and it is passed to PTR_ERR and also finally returning zero which is success instead of failure. Fix this by adding the missing error code when VMA allocation fails. Fixes: 08872cb13a71 ("drm/i915/mtl/huc: auth HuC via GSC") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230614223646.2583633-1-daniele.ceraolospurio@intel.com (cherry picked from commit ce432fd34cc6c7b7af06d1403ec0be19d1e518dc) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2023-06-20drm/i915/gsc: take a wakeref for the proxy-init-completion checkAlan Previn
Ensure intel_gsc_uc_fw_init_done and intel_gsc_uc_fw_proxy_init takes a wakeref before reading GSC Shim registers. NOTE: another patch in review also adds a call from selftest to this same function. (https://patchwork.freedesktop.org/series/117713/) which is why i am adding the wakeref inside the callee, not the caller. v2: - add a helper, 'gsc_uc_get_fw_status' for both callers (Daniele Ceraolo) Fixes: 99afb7cc8c44 ("drm/i915/pxp: Add ARB session creation and cleanup") Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230608230716.3079594-1-alan.previn.teres.alexis@intel.com (cherry picked from commit 8c33c3755b75c98d8eb490df345b4187a295a1a8) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2023-06-20dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt ↵Heiner Kallweit
controller binding Convert Amlogic Meson GPIO interrupt controller binding to yaml. Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/e06e9f26-cf55-5596-c799-d698e9d7b409@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-06-20MAINTAINERS: add PHY-related files to Amlogic SoC file listHeiner Kallweit
Add PHY-related files to the Amlogic SoC file list. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/38f87b22-d9a8-b8d8-ba7b-a2c2d7311b04@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-06-20RISC-V: KVM: Remove unneeded semicolonYang Li
./arch/riscv/kvm/aia_imsic.c:94:2-3: Unneeded semicolon ./arch/riscv/kvm/aia_imsic.c:134:2-3: Unneeded semicolon ./arch/riscv/kvm/aia_imsic.c:173:2-3: Unneeded semicolon ./arch/riscv/kvm/aia_imsic.c:210:2-3: Unneeded semicolon ./arch/riscv/kvm/aia_imsic.c:296:2-3: Unneeded semicolon ./arch/riscv/kvm/aia_imsic.c:354:2-3: Unneeded semicolon ./arch/riscv/kvm/aia_device.c:105:4-5: Unneeded semicolon ./arch/riscv/kvm/aia_device.c:166:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5569 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2023-06-20RISC-V: KVM: Allow Svnapot extension for Guest/VMAnup Patel
We extend the KVM ISA extension ONE_REG interface to allow KVM user space to detect and enable Svnapot extension for Guest/VM. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2023-06-19riscv: mm: Pre-allocate PGD entries for vmalloc/modules areaBjörn Töpel
The RISC-V port requires that kernel PGD entries are to be synchronized between MMs. This is done via the vmalloc_fault() function, that simply copies the PGD entries from init_mm to the faulting one. Historically, faulting in PGD entries have been a source for both bugs [1], and poor performance. One way to get rid of vmalloc faults is by pre-allocating the PGD entries. Pre-allocating the entries potientially wastes 64 * 4K (65 on SV39). The pre-allocation function is pulled from Jörg Rödel's x86 work, with the addition of 3-level page tables (PMD allocations). The pmd_alloc() function needs the ptlock cache to be initialized (when split page locks is enabled), so the pre-allocation is done in a RISC-V specific pgtable_cache_init() implementation. Pre-allocate the kernel PGD entries for the vmalloc/modules area, but only for 64b platforms. Link: https://lore.kernel.org/lkml/20200508144043.13893-1-joro@8bytes.org/ # [1] Signed-off-by: Björn Töpel <bjorn@rivosinc.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230531093817.665799-1-bjorn@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-06-19Merge tag 'hyperv-fixes-signed-20230619' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Fix races in Hyper-V PCI controller (Dexuan Cui) - Fix handling of hyperv_pcpu_input_arg (Michael Kelley) - Fix vmbus_wait_for_unload to scan present CPUs (Michael Kelley) - Call hv_synic_free in the failure path of hv_synic_alloc (Dexuan Cui) - Add noop for real mode handlers for virtual trust level code (Saurabh Sengar) * tag 'hyperv-fixes-signed-20230619' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: PCI: hv: Add a per-bus mutex state_lock Revert "PCI: hv: Fix a timing issue which causes kdump to fail occasionally" PCI: hv: Remove the useless hv_pcichild_state from struct hv_pci_dev PCI: hv: Fix a race condition in hv_irq_unmask() that can cause panic PCI: hv: Fix a race condition bug in hv_pci_query_relations() arm64/hyperv: Use CPUHP_AP_HYPERV_ONLINE state to fix CPU online sequencing x86/hyperv: Fix hyperv_pcpu_input_arg handling when CPUs go online/offline Drivers: hv: vmbus: Fix vmbus_wait_for_unload() to scan present CPUs Drivers: hv: vmbus: Call hv_synic_free() if hv_synic_alloc() fails x86/hyperv/vtl: Add noop for realmode pointers
2023-06-19watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCHPetr Mladek
The HAVE_ prefix means that the code could be enabled. Add another variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix. It will be set when it should be built. It will make it compatible with the other hardlockup detectors. The change allows to clean up dependencies of PPC_WATCHDOG and HAVE_HARDLOCKUP_DETECTOR_PERF definitions for powerpc. As a result HAVE_HARDLOCKUP_DETECTOR_PERF has the same dependencies on arm, x86, powerpc architectures. Link: https://lkml.kernel.org/r/20230616150618.6073-7-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64Petr Mladek
The HAVE_ prefix means that the code could be enabled. Add another variable for HAVE_HARDLOCKUP_DETECTOR_SPARC64 without this prefix. It will be set when it should be built. It will make it compatible with the other hardlockup detectors. Before, it is far from obvious that the SPARC64 variant is actually used: $> make ARCH=sparc64 defconfig $> grep HARDLOCKUP_DETECTOR .config CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64=y After, it is more clear: $> make ARCH=sparc64 defconfig $> grep HARDLOCKUP_DETECTOR .config CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64=y CONFIG_HARDLOCKUP_DETECTOR_SPARC64=y Link: https://lkml.kernel.org/r/20230616150618.6073-6-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specificPetr Mladek
There are several hardlockup detector implementations and several Kconfig values which allow selection and build of the preferred one. CONFIG_HARDLOCKUP_DETECTOR was introduced by the commit 23637d477c1f53acb ("lockup_detector: Introduce CONFIG_HARDLOCKUP_DETECTOR") in v2.6.36. It was a preparation step for introducing the new generic perf hardlockup detector. The existing arch-specific variants did not support the to-be-created generic build configurations, sysctl interface, etc. This distinction was made explicit by the commit 4a7863cc2eb5f98 ("x86, nmi_watchdog: Remove ARCH_HAS_NMI_WATCHDOG and rely on CONFIG_HARDLOCKUP_DETECTOR") in v2.6.38. CONFIG_HAVE_NMI_WATCHDOG was introduced by the commit d314d74c695f967e105 ("nmi watchdog: do not use cpp symbol in Kconfig") in v3.4-rc1. It replaced the above mentioned ARCH_HAS_NMI_WATCHDOG. At that time, it was still used by three architectures, namely blackfin, mn10300, and sparc. The support for blackfin and mn10300 architectures has been completely dropped some time ago. And sparc is the only architecture with the historic NMI watchdog at the moment. And the old sparc implementation is really special. It is always built on sparc64. It used to be always enabled until the commit 7a5c8b57cec93196b ("sparc: implement watchdog_nmi_enable and watchdog_nmi_disable") added in v4.10-rc1. There are only few locations where the sparc64 NMI watchdog interacts with the generic hardlockup detectors code: + implements arch_touch_nmi_watchdog() which is called from the generic touch_nmi_watchdog() + implements watchdog_hardlockup_enable()/disable() to support /proc/sys/kernel/nmi_watchdog + is always preferred over other generic watchdogs, see CONFIG_HARDLOCKUP_DETECTOR + includes asm/nmi.h into linux/nmi.h because some sparc-specific functions are needed in sparc-specific code which includes only linux/nmi.h. The situation became more complicated after the commit 05a4a95279311c3 ("kernel/watchdog: split up config options") and commit 2104180a53698df5 ("powerpc/64s: implement arch-specific hardlockup watchdog") in v4.13-rc1. They introduced HAVE_HARDLOCKUP_DETECTOR_ARCH. It was used for powerpc specific hardlockup detector. It was compatible with the perf one regarding the general boot, sysctl, and programming interfaces. HAVE_HARDLOCKUP_DETECTOR_ARCH was defined as a superset of HAVE_NMI_WATCHDOG. It made some sense because all arch-specific detectors had some common requirements, namely: + implemented arch_touch_nmi_watchdog() + included asm/nmi.h into linux/nmi.h + defined the default value for /proc/sys/kernel/nmi_watchdog But it actually has made things pretty complicated when the generic buddy hardlockup detector was added. Before the generic perf detector was newer supported together with an arch-specific one. But the buddy detector could work on any SMP system. It means that an architecture could support both the arch-specific and buddy detector. As a result, there are few tricky dependencies. For example, CONFIG_HARDLOCKUP_DETECTOR depends on: ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH The problem is that the very special sparc implementation is defined as: HAVE_NMI_WATCHDOG && !HAVE_HARDLOCKUP_DETECTOR_ARCH Another problem is that the meaning of HAVE_NMI_WATCHDOG is far from clear without reading understanding the history. Make the logic less tricky and more self-explanatory by making HAVE_NMI_WATCHDOG specific for the sparc64 implementation. And rename it to HAVE_HARDLOCKUP_DETECTOR_SPARC64. Note that HARDLOCKUP_DETECTOR_PREFER_BUDDY, HARDLOCKUP_DETECTOR_PERF, and HARDLOCKUP_DETECTOR_BUDDY may conflict only with HAVE_HARDLOCKUP_DETECTOR_ARCH. They depend on HARDLOCKUP_DETECTOR and it is not longer enabled when HAVE_NMI_WATCHDOG is set. Link: https://lkml.kernel.org/r/20230616150618.6073-5-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.hPetr Mladek
arch_touch_nmi_watchdog() needs a different implementation for various hardlockup detector implementations. And it does nothing when any hardlockup detector is not built at all. arch_touch_nmi_watchdog() is declared via linux/nmi.h. And it must be defined as an empty function when there is no hardlockup detector. It is done directly in this header file for the perf and buddy detectors. And it is done in the included asm/linux.h for arch specific detectors. The reason probably is that the arch specific variants build the code using another conditions. For example, powerpc64/sparc64 builds the code when CONFIG_PPC_WATCHDOG is enabled. Another reason might be that these architectures define more functions in asm/nmi.h anyway. However the generic code actually knows when the function will be implemented. It happens when some full featured or the sparc64-specific hardlockup detector is built. In particular, CONFIG_HARDLOCKUP_DETECTOR can be enabled only when a generic or arch-specific full featured hardlockup detector is available. The only exception is sparc64 which can be built even when the global HARDLOCKUP_DETECTOR switch is disabled. The information about sparc64 is a bit complicated. The hardlockup detector is built there when CONFIG_HAVE_NMI_WATCHDOG is set and CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH is not set. People might wonder whether this change really makes things easier. The motivation is: + The current logic in linux/nmi.h is far from obvious. For example, arch_touch_nmi_watchdog() is defined as {} when neither CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER nor CONFIG_HAVE_NMI_WATCHDOG is defined. + The change synchronizes the checks in lib/Kconfig.debug and in the generic code. + It is a step that will help cleaning HAVE_NMI_WATCHDOG related checks. The change should not change the existing behavior. Link: https://lkml.kernel.org/r/20230616150618.6073-4-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/hardlockup: make the config checks more straightforwardPetr Mladek
There are four possible variants of hardlockup detectors: + buddy: available when SMP is set. + perf: available when HAVE_HARDLOCKUP_DETECTOR_PERF is set. + arch-specific: available when HAVE_HARDLOCKUP_DETECTOR_ARCH is set. + sparc64 special variant: available when HAVE_NMI_WATCHDOG is set and HAVE_HARDLOCKUP_DETECTOR_ARCH is not set. The check for the sparc64 variant is more complicated because HAVE_NMI_WATCHDOG is used to #ifdef code used by both arch-specific and sparc64 specific variant. Therefore it is automatically selected with HAVE_HARDLOCKUP_DETECTOR_ARCH. This complexity is partly hidden in HAVE_HARDLOCKUP_DETECTOR_NON_ARCH. It reduces the size of some checks but it makes them harder to follow. Finally, the other temporary variable HARDLOCKUP_DETECTOR_NON_ARCH is used to re-compute HARDLOCKUP_DETECTOR_PERF/BUDDY when the global HARDLOCKUP_DETECTOR switch is enabled/disabled. Make the logic more straightforward by the following changes: + Better explain the role of HAVE_HARDLOCKUP_DETECTOR_ARCH and HAVE_NMI_WATCHDOG in comments. + Add HAVE_HARDLOCKUP_DETECTOR_BUDDY so that there is separate HAVE_* for all four hardlockup detector variants. Use it in the other conditions instead of SMP. It makes it clear that it is about the buddy detector. + Open code HAVE_HARDLOCKUP_DETECTOR_NON_ARCH in HARDLOCKUP_DETECTOR and HARDLOCKUP_DETECTOR_PREFER_BUDDY. It helps to understand the conditions between the four hardlockup detector variants. + Define the exact conditions when HARDLOCKUP_DETECTOR_PERF/BUDDY can be enabled. It explains the dependency on the other hardlockup detector variants. Also it allows to remove HARDLOCKUP_DETECTOR_NON_ARCH by using "imply". It triggers re-evaluating HARDLOCKUP_DETECTOR_PERF/BUDDY when the global HARDLOCKUP_DETECTOR switch is changed. + Add dependency on HARDLOCKUP_DETECTOR so that the affected variables disappear when the hardlockup detectors are disabled. Another nice side effect is that HARDLOCKUP_DETECTOR_PREFER_BUDDY value is not preserved when the global switch is disabled. The user has to make the decision again when it gets re-enabled. Link: https://lkml.kernel.org/r/20230616150618.6073-3-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/hardlockup: sort hardlockup detector related config values a ↵Petr Mladek
logical way Patch series "watchdog/hardlockup: Cleanup configuration of hardlockup detectors", v2. Clean up watchdog Kconfig after introducing the buddy detector. This patch (of 6): There are four possible variants of hardlockup detectors: + buddy: available when SMP is set. + perf: available when HAVE_HARDLOCKUP_DETECTOR_PERF is set. + arch-specific: available when HAVE_HARDLOCKUP_DETECTOR_ARCH is set. + sparc64 special variant: available when HAVE_NMI_WATCHDOG is set and HAVE_HARDLOCKUP_DETECTOR_ARCH is not set. Only one hardlockup detector can be compiled in. The selection is done using quite complex dependencies between several CONFIG variables. The following patches will try to make it more straightforward. As a first step, reorder the definitions of the various CONFIG variables. The logical order is: 1. HAVE_* variables define available variants. They are typically defined in the arch/ config files. 2. HARDLOCKUP_DETECTOR y/n variable defines whether the hardlockup detector is enabled at all. 3. HARDLOCKUP_DETECTOR_PREFER_BUDDY y/n variable defines whether the buddy detector should be preferred over the perf one. Note that the arch specific variants are always preferred when available. 4. HARDLOCKUP_DETECTOR_PERF/BUDDY variables define whether the given detector is enabled in the end. 5. HAVE_HARDLOCKUP_DETECTOR_NON_ARCH and HARDLOCKUP_DETECTOR_NON_ARCH are temporary variables that are going to be removed in a followup patch. This is a preparation step for further cleanup. It will change the logic without shuffling the definitions. This change temporary breaks the C-like ordering where the variables are declared or defined before they are used. It is not really needed for Kconfig. Also the following patches will rework the logic so that the ordering will be C-like in the end. The patch just shuffles the definitions. It should not change the existing behavior. Link: https://lkml.kernel.org/r/20230616150618.6073-1-pmladek@suse.com Link: https://lkml.kernel.org/r/20230616150618.6073-2-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/hardlockup: move SMP barriers from common code to buddy codeDouglas Anderson
It's been suggested that since the SMP barriers are only potentially useful for the buddy hardlockup detector, not the perf hardlockup detector, that the barriers belong in the buddy code. Let's move them and add clearer comments about why they're needed. Link: https://lkml.kernel.org/r/20230526184139.9.I5ab0a0eeb0bd52fb23f901d298c72fa5c396e22b@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Suggested-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDYDouglas Anderson
The dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY was more complicated than it needed to be. If the "perf" detector is available and we have SMP then we have a choice, so enable the config based on just those two config items. Link: https://lkml.kernel.org/r/20230526184139.8.I49d5b483336b65b8acb1e5066548a05260caf809@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Suggested-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/buddy: don't copy the cpumask in watchdog_next_cpu()Douglas Anderson
There's no reason to make a copy of the "watchdog_cpus" locally in watchdog_next_cpu(). Making a copy wouldn't make things any more race free and we're just reading the value so there's no need for a copy. Link: https://lkml.kernel.org/r/20230526184139.7.If466f9a2b50884cbf6a1d8ad05525a2c17069407@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Suggested-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is calledDouglas Anderson
In the patch ("watchdog/hardlockup: detect hard lockups using secondary (buddy) CPUs"), we added a call from the common watchdog.c file into the buddy. That call could be done more cleanly. Specifically: 1. If we move the call into watchdog_hardlockup_kick() then it keeps watchdog_timer_fn() simpler. 2. We don't need to pass an "unsigned long" to the buddy for the timer count. In the patch ("watchdog/hardlockup: add a "cpu" param to watchdog_hardlockup_check()") the count was changed to "atomic_t" which is backed by an int, so we should match types. Link: https://lkml.kernel.org/r/20230526184139.6.I006c7d958a1ea5c4e1e4dc44a25596d9bb5fd3ba@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Suggested-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog()Douglas Anderson
In the patch ("watchdog/hardlockup: add comments to touch_nmi_watchdog()") we adjusted some comments for touch_nmi_watchdog(). The comment about the softlockup had a typo and were also felt to be too obvious. Remove it. Link: https://lkml.kernel.org/r/20230526184139.5.Ia593afc9eb12082d55ea6681dc2c5a89677f20a8@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Suggested-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy()Douglas Anderson
In the patch ("watchdog/hardlockup: add a "cpu" param to watchdog_hardlockup_check()") we started using a cpumask to keep track of which CPUs to backtrace. When setting up this cpumask, it's better to use cpumask_copy() than to just copy the structure directly. Fix this. Link: https://lkml.kernel.org/r/20230526184139.4.Iccee2d1ea19114dafb6553a854ea4d8ab2a3f25b@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Suggested-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick()Douglas Anderson
In the patch ("watchdog/hardlockup: add a "cpu" param to watchdog_hardlockup_check()") there was no reason to use raw_cpu_ptr(). Using this_cpu_ptr() works fine. Link: https://lkml.kernel.org/r/20230526184139.3.I660e103077dcc23bb29aaf2be09cb234e0495b2d@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Suggested-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement ↵Douglas Anderson
watchdog_hardlockup_probe() Right now there is one arch (sparc64) that selects HAVE_NMI_WATCHDOG without selecting HAVE_HARDLOCKUP_DETECTOR_ARCH. Because of that one architecture, we have some special case code in the watchdog core to handle the fact that watchdog_hardlockup_probe() isn't implemented. Let's implement watchdog_hardlockup_probe() for sparc64 and get rid of the special case. As a side effect of doing this, code inspection tells us that we could fix a minor bug where the system won't properly realize that NMI watchdogs are disabled. Specifically, on powerpc if CONFIG_PPC_WATCHDOG is turned off the arch might still select CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH which selects CONFIG_HAVE_NMI_WATCHDOG. Since CONFIG_PPC_WATCHDOG was off then nothing will override the "weak" watchdog_hardlockup_probe() and we'll fallback to looking at CONFIG_HAVE_NMI_WATCHDOG. Link: https://lkml.kernel.org/r/20230526184139.2.Ic6ebbf307ca0efe91f08ce2c1eb4a037ba6b0700@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Suggested-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe failsDouglas Anderson
Patch series "watchdog: Cleanup / fixes after buddy series v5 reviews". This patch series attempts to finish resolving the feedback received from Petr Mladek on the v5 series I posted. Probably the only thing that wasn't fully as clean as Petr requested was the Kconfig stuff. I couldn't find a better way to express it without a more major overhaul. In the very least, I renamed "NON_ARCH" to "PERF_OR_BUDDY" in the hopes that will make it marginally better. Nothing in this series is terribly critical and even the bugfixes are small. However, it does cleanup a few things that were pointed out in review. This patch (of 10): The permissions for the kernel.nmi_watchdog sysctl have always been set at compile time despite the fact that a watchdog can fail to probe. Let's fix this and set the permissions based on whether the hardlockup detector actually probed. Link: https://lkml.kernel.org/r/20230527014153.2793931-1-dianders@chromium.org Link: https://lkml.kernel.org/r/20230526184139.1.I0d75971cc52a7283f495aac0bd5c3041aadc734e@changeid Fixes: a994a3147e4c ("watchdog/hardlockup/perf: Implement init time detection of perf") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reported-by: Petr Mladek <pmladek@suse.com> Closes: https://lore.kernel.org/r/ZHCn4hNxFpY5-9Ki@alley Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19mm: page_alloc: make compound_page_dtors staticMiaohe Lin
It's only used inside page_alloc.c now. So make it static and remove the declaration in mm.h. Link: https://lkml.kernel.org/r/20230617034622.1235913-1-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19Docs/admin-guide/mm/damon/usage: update the ways for getting monitoring resultsSeongJae Park
The recommended ways for getting DAMON monitoring results are using tried_regions sysfs directory for partial snapshot of the results, and DAMON tracepoint for full record of the results. However, the tried_regions sysfs directory usage has not sufficiently updated on some sections of the DAMON usage document. Update those. Link: https://lkml.kernel.org/r/20230616191742.87531-8-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19Docs/admin-guide/mm/damon/usage: clarify quotas and watermarks sysfs interfaceSeongJae Park
Explanation of DAMOS quotas and watermarks are not clearly explaining the meaning and expectation of each file. Add more clarification for those. Link: https://lkml.kernel.org/r/20230616191742.87531-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19Docs/admin-guide/mm/damon/usage: link design document for DAMOSSeongJae Park
The background and concept of DAMOS is redundantly documented, in the design document and the usage document. Replace the duplicated ones in usage document with links to the design document. Link: https://lkml.kernel.org/r/20230616191742.87531-6-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19Docs/admin-guide/mm/damon/usage: remove unnecessary sentences about ↵SeongJae Park
supported address spaces Brief explanation of DAMON user space tool and sysfs interface are unnecessarily and repeatedly mentioning the list of address spaces that DAMON is supporting. Remove those. Link: https://lkml.kernel.org/r/20230616191742.87531-5-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19Docs/admin-guide/mm/damon/usage: fix typos in references and commasSeongJae Park
Fix typos including a unnecessary comma and incomplete ':ref:' keywords. Link: https://lkml.kernel.org/r/20230616191742.87531-4-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19Docs/admin-guide/mm/damon/start: update DAMOS example commandSeongJae Park
DAMON user-space tool, damo, has deprecated[1] its old DAMOS schemes specification format. However, an example of DAMON documentation is still using it. Update the example to use one of the alternative options. [1] https://github.com/awslabs/damo/commit/e9950ae68f6c Link: https://lkml.kernel.org/r/20230616191742.87531-3-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19Docs/mm/damon/design: document 'age' of regionSeongJae Park
Patch series "Docs/{mm,admin-guide}damon: update design and usage docs". Update DAMON design and usage documents for outdated and unnecessarily duplicated parts. This patch (of 7): The 'age' of each region in DAMON monitoring results is an important concept for both monitoring part and DAMOS. And DAMOS section of the design document is mentioning it. However, the age itself is not explained in the document. Add a section for that. Link: https://lkml.kernel.org/r/20230616191742.87531-1-sj@kernel.org Link: https://lkml.kernel.org/r/20230616191742.87531-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19mm: move mm_count into its own cache lineMathieu Desnoyers
The mm_struct mm_count field is frequently updated by mmgrab/mmdrop performed by context switch. This causes false-sharing for surrounding mm_struct fields which are read-mostly. This has been observed on a 2sockets/112core/224cpu Intel Sapphire Rapids server running hackbench, and by the kernel test robot will-it-scale testcase. Move the mm_count field into its own cache line to prevent false-sharing with other mm_struct fields. Move mm_count to the first field of mm_struct to minimize the amount of padding required: rather than adding padding before and after the mm_count field, padding is only added after mm_count. Note that I noticed this odd comment in mm_struct: commit 2e3025434a6b ("mm: relocate 'write_protect_seq' in struct mm_struct") /* * With some kernel config, the current mmap_lock's offset * inside 'mm_struct' is at 0x120, which is very optimal, as * its two hot fields 'count' and 'owner' sit in 2 different * cachelines, and when mmap_lock is highly contended, both * of the 2 fields will be accessed frequently, current layout * will help to reduce cache bouncing. * * So please be careful with adding new fields before * mmap_lock, which can easily push the 2 fields into one * cacheline. */ struct rw_semaphore mmap_lock; This comment is rather odd for a few reasons: - It requires addition/removal of mm_struct fields to carefully consider field alignment of _other_ fields, - It expresses the wish to keep an "optimal" alignment for a specific kernel config. I suspect that the author of this comment may want to revisit this topic and perhaps introduce a split-struct approach for struct rw_semaphore, if the need is to place various fields of this structure in different cache lines. Link: https://lkml.kernel.org/r/20230515143536.114960-1-mathieu.desnoyers@efficios.com Fixes: 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid") Fixes: af7f588d8f73 ("sched: Introduce per-memory-map concurrency ID") Link: https://lore.kernel.org/lkml/7a0c1db1-103d-d518-ed96-1584a28fbf32@efficios.com Reported-by: kernel test robot <yujie.liu@intel.com> Link: https://lore.kernel.org/oe-lkp/202305151017.27581d75-yujie.liu@intel.com Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Olivier Dion <odion@efficios.com> Cc: <michael.christie@oracle.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19mm/memcg: remove return value of mem_cgroup_scan_tasks()ZhangPeng
No user checks the return value of mem_cgroup_scan_tasks(). Make the return value void. Link: https://lkml.kernel.org/r/20230616063030.977586-1-zhangpeng362@huawei.com Signed-off-by: ZhangPeng <zhangpeng362@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nanyong Sun <sunnanyong@huawei.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19mm/damon/core-test: add a test for damon_set_attrs()SeongJae Park
Commit 5ff6e2fff88e ("mm/damon/core: fix divide error in damon_nr_accesses_to_accesses_bp()") fixed a bug by adding arguments validation in damon_set_attrs(). Add a unit test for the added validation to ensure the bug cannot occur again. Link: https://lkml.kernel.org/r/20230615183323.87561-1-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19mm: remove is_longterm_pinnable_page() and reimplement ↵Vishal Moola (Oracle)
folio_is_longterm_pinnable() folio_is_longterm_pinnable() already exists as a wrapper function. Now that the whole implementation of is_longterm_pinnable_page() can be implemented using folios, folio_is_longterm_pinnable() can be made its own standalone function - and we can remove is_longterm_pinnable_page(). Link: https://lkml.kernel.org/r/20230614021312.34085-6-vishal.moola@gmail.com Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19mm/gup.c: reorganize try_get_folio()Vishal Moola (Oracle)
try_get_folio() takes in a page, then chooses to do some folio operations based on the flags (either FOLL_GET or FOLL_PIN). We can rewrite this function to be more purpose oriented. After calling try_get_folio(), if neither FOLL_GET nor FOLL_PIN are set, warn and fail. If FOLL_GET is set we can return the result. If FOLL_GET is not set then FOLL_PIN is set, so we pin the folio. This change assists with folio conversions, and makes the function more readable. Link: https://lkml.kernel.org/r/20230614021312.34085-5-vishal.moola@gmail.com Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19mm/gup_test.c: convert verify_dma_pinned() to us foliosVishal Moola (Oracle)
verify_dma_pinned() checks that pages are dma-pinned. We can convert this to use folios. Link: https://lkml.kernel.org/r/20230614021312.34085-4-vishal.moola@gmail.com Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19mmzone: introduce folio_migratetype()Vishal Moola (Oracle)
Introduce folio_migratetype() as a folio equivalent for get_pageblock_migratetype(). This function intends to return the migratetype the folio is located in, hence the name choice. Link: https://lkml.kernel.org/r/20230614021312.34085-3-vishal.moola@gmail.com Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19mmzone: introduce folio_is_zone_movable()Vishal Moola (Oracle)
Patch series "Replace is_longterm_pinnable_page()", v2. This patchset introduces some more helper functions for the folio conversions, and converts all callers of is_longterm_pinnable_page() to use folios. This patch (of 5): Introduce folio_is_zone_movable() to act as a folio equivalent for is_zone_movable_page(). This is to assist in later folio conversions. Link: https://lkml.kernel.org/r/20230614021312.34085-1-vishal.moola@gmail.com Link: https://lkml.kernel.org/r/20230614021312.34085-2-vishal.moola@gmail.com Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-22 03:00:14 +0000