| Age | Commit message (Collapse) | Author |
|---|
|
When the EPC is started or stopped multiple times from configfs, just
return -EALREADY. There is no need to call the EPC start/stop functions
in those cases.
Link: https://lore.kernel.org/r/20230602114756.36586-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Currently, the EPF probe function doesn't get the device ID argument needed
to correctly identify the device table ID of the EPF device.
When multiple entries are added to the "struct pci_epf_device_id" table,
the probe function needs to identify the correct one. This is achieved by
modifying the pci_epf_match_id() function to return the match ID pointer
and passing it to the driver's probe function.
pci_epf_device_match() function can return bool based on the return value
of pci_epf_match_id().
Link: https://lore.kernel.org/r/20230602114756.36586-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Both pci_epc_raise_irq() and pci_epc_map_msi_irq() APIs expect the
MSI/MSI-X vectors to start from 1 but it is not documented. Add the range
info to the kdoc of the APIs to make it clear.
Link: https://lore.kernel.org/r/20230602114756.36586-2-manivannan.sadhasivam@linaro.org
Fixes: 5e8cb4033807 ("PCI: endpoint: Add EP core layer to enable EP controller and EP functions")
Fixes: 87d5972e476f ("PCI: endpoint: Add pci_epc_ops to map MSI IRQ")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
|
|
pci_epf_type_add_cfs() should not be called with an unbound EPF device,
that is, an epf device with epf->driver not set. For such case, replace the
NULL return in pci_epf_type_add_cfs() with a clear ERR_PTR(-ENODEV) pointer
error return.
Link: https://lore.kernel.org/r/20230515074348.595704-2-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivami <manivannan.sadhasivam@linaro.org>
|
|
In pci_epf_test_init_dma_chan() epf_test->dma_chan_rx is assigned from
dma_request_channel() with DMA_DEV_TO_MEM as filter.dma_mask.
However, in pci_epf_test_data_transfer() if the dir is DMA_DEV_TO_MEM,
epf->dma_chan_rx should be used but instead we are using
epf_test->dma_chan_tx.
Fix it.
Link: https://lore.kernel.org/r/20230412063447.2841177-1-yoshihiro.shimoda.uh@renesas.com
Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities")
Tested-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
|
|
Simplify the code of pci_endpoint_test_msi_irq() by correctly using
booleans: remove the msix comparison to false as that variable is already a
boolean, and directly return the result of the comparison of the raised
interrupt number.
Link: https://lore.kernel.org/r/20230415023542.77601-18-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
pci_endpoint_test_irqhandler() always rewrites the status register when an
IRQ is raised, either as-is if STATUS_IRQ_RAISED is not set, or with
STATUS_IRQ_RAISED cleared if that flag is set. The first case creates a
race window with the endpoint side, meaning that the host side test driver
may end up reading what it just wrote, thus losing the real status as set
by the endpoint side before raising the next interrupt. This can prevent
detecting that the STATUS_IRQ_RAISED flag was set by the endpoint.
Remove this race window by not clearing the STATUS_IRQ_RAISED status flag
and not rewriting that register for every IRQ received.
Link: https://lore.kernel.org/r/20230415023542.77601-17-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
The irq_raised completion used to detect the end of a test case is
initialized when the test device is probed, but never reinitialized again
before a test case. As a result, the irq_raised completion synchronization
is effective only for the first ioctl test case executed. Any subsequent
call to wait_for_completion() by another ioctl() call will immediately
return, potentially too early, leading to false positive failures.
Fix this by reinitializing the irq_raised completion before starting a new
ioctl() test command.
Link: https://lore.kernel.org/r/20230415023542.77601-16-dlemoal@kernel.org
Fixes: 2c156ac71c6b ("misc: Add host side PCI driver for PCI test function device")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
|
|
In pci_endpoint_test_remove(), freeing the IRQs after removing the device
creates a small race window for IRQs to be received with the test device
memory already released, causing the IRQ handler to access invalid memory,
resulting in an oops.
Free the device IRQs before removing the device to avoid this issue.
Link: https://lore.kernel.org/r/20230415023542.77601-15-dlemoal@kernel.org
Fixes: e03327122e2c ("pci_endpoint_test: Add 2 ioctl commands")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
|
|
In pci_epf_test_print_rate(), instead of open coding a reduction loop to
allow for a division by a 32-bits ns value, simply use div64_u64() to
calculate the transfer rate. To match the printed unit of KB/s, this
calculation divides the rate by 1000 instead of 1024 (that would be KiB/s
unit).
Change the format of the results printed by pci_epf_test_print_rate() to be
more compact without the double new line. Also use dev_info() instead of
pr_info().
Link: https://lore.kernel.org/r/20230415023542.77601-14-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
There is no need to have each read, write and copy test functions check
for the FLAG_USE_DMA flag against the DMA support status indicated by
epf_test->dma_supported. Move this test to the command handler function
pci_epf_test_cmd_handler() to check once for all cases.
Link: https://lore.kernel.org/r/20230415023542.77601-13-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
Each of the test functions pci_epf_test_write(), pci_epf_test_read() and
pci_epf_test_copy() return an int result which is used by
pci_epf_test_cmd_handler() to set a success or error bit in the request
status.
In the spirit of keeping the processing of each test case self-contained
within its own test function, move the request status field update from
pci_epf_test_cmd_handler() to each of these test functions and change these
functions declaration to returning void.
Link: https://lore.kernel.org/r/20230415023542.77601-12-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
Command codes are never combined together as flags into a single value.
Thus we can replace the series of "if" tests in pci_epf_test_cmd_handler()
with a cleaner switch-case statement. This also allows checking that we
got a valid command and print an error message if we did not.
Link: https://lore.kernel.org/r/20230415023542.77601-11-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
The pci-epf-test driver uses the test register BAR memory directly to get
and execute a test registers set by the RC side and defined using a struct
pci_epf_test_reg. This direct use relies on using the register BAR address
as a pointer to a struct pci_epf_test_reg to execute the test case and to
send back the test result through the status field of struct
pci_epf_test_reg. In practice, the status field is always updated before an
interrupt is raised in pci_epf_test_raise_irq(), to ensure that the RC side
sees the updated status when receiving an interrupt.
However, such assignment direct access does not ensure that changes to the
status register make it to memory, and so visible to the host, before an
interrupt is raised, thus potentially resulting in the RC host not seeing
the correct status result for a test.
Avoid this potential problem by using READ_ONCE()/WRITE_ONCE() when
accessing the command and status fields of a pci_epf_test_reg structure.
This ensure that a test start (pci_epf_test_cmd_handler() function) and
completion (with the function pci_epf_test_raise_irq()) achieve a correct
synchronization with the MMIO register accesses on the RC host.
Link: https://lore.kernel.org/r/20230415023542.77601-10-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
For the commands COMMAND_RAISE_LEGACY_IRQ, COMMAND_RAISE_MSI_IRQ and
COMMAND_RAISE_MSIX_IRQ, the function pci_epf_test_cmd_handler()
sets the STATUS_IRQ_RAISED status flag and calls the epc function
pci_epc_raise_irq() directly. However, this is also exactly what the
pci_epf_test_raise_irq() function does. Avoid duplicating these
operations by directly using pci_epf_test_raise_irq() for the IRQ test
commands. It is OK to do so as the host side endpoint test driver always
set the correct IRQ type for the IRQ test commands.
At the same time, move the IRQ number check done for the
COMMAND_RAISE_MSI_IRQ and COMMAND_RAISE_MSIX_IRQ commands
to pci_epf_test_raise_irq(), to also check the IRQ number requested
by the host for other test commands.
This significantly simplifies pci_epf_test_cmd_handler().
Link: https://lore.kernel.org/r/20230415023542.77601-9-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
Change the interface of the function pci_epf_test_raise_irq() to directly
pass a pointer to the struct pci_epf_test_reg defining the test being
executed. This avoids the need for grabbing this pointer using the register
BAR address and simplifies the call sites as the IRQ type and IRQ numbers
do not have to be passed as arguments.
Link: https://lore.kernel.org/r/20230415023542.77601-8-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
The function pci_epf_test_cmd_handler() uses the register BAR address as a
pointer to a struct pci_epf_test_reg to determine the command sent by the
host and to execute the test function accordingly. There is no need for
doing this assignment again in each of the read, write and copy test
functions. We can simply pass the reg pointer as an argument to the
functions pci_epf_test_write(), pci_epf_test_read() and
pci_epf_test_copy().
Link: https://lore.kernel.org/r/20230415023542.77601-7-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
Instead of an open coded call to the tx_submit() operation of struct
dma_async_tx_descriptor, use the helper function dmaengine_submit().
No functional change is introduced with this.
Link: https://lore.kernel.org/r/20230415023542.77601-6-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
pci_epf_test_data_transfer() and pci_epf_test_dma_callback() are not
handling DMA transfer completion correctly, leading to completion
notifications to the RC side that are too early. This problem can be
detected when the RC side is running an IOMMU with messages such as:
pci-endpoint-test 0000:0b:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x001c address=0xfff00000 flags=0x0000]
When running the pcitest.sh tests: the address used for a previous
test transfer generates the above error while the next test transfer is
running.
Fix this by testing the DMA transfer status in pci_epf_test_dma_callback()
and notifying the completion only when the transfer status is DMA_COMPLETE
or DMA_ERROR. Furthermore, in pci_epf_test_data_transfer(), be paranoid and
check again the transfer status and always call dmaengine_terminate_sync()
before returning.
Link: https://lore.kernel.org/r/20230415023542.77601-5-dlemoal@kernel.org
Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
|
|
Reinitialize the transfer_complete DMA transfer completion before calling
tx_submit(), to avoid seeing the DMA transfer complete before the
completion is initialized, thus potentially losing the completion
notification.
Link: https://lore.kernel.org/r/20230415023542.77601-4-dlemoal@kernel.org
Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
|
|
pci_epf_type_add_cfs() is called only from pci_ep_cfs_add_type_group() in
drivers/pci/endpoint/pci-ep-cfs.c, so there is no need to export this
function. Move its code from pci-epf-core.c to pci-ep-cfs.c as a static
function.
Link: https://lore.kernel.org/r/20230415023542.77601-3-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
A PCI endpoint function driver can define function specific attributes
under its function configfs directory using the add_cfs() endpoint driver
operation. This is done by tying up the mkdir operation for the function
configfs directory to a call to the add_cfs() operation. However, there
are no checks preventing the user from repeatedly creating function
specific attribute directories with different names, resulting in the same
endpoint specific attributes group being added multiple times, which also
result in an invalid reference counting for the attribute groups. E.g.,
using the pci-epf-ntb function driver as an example, the user creates the
function as follows:
$ modprobe pci-epf-ntb
$ cd /sys/kernel/config/pci_ep/functions/pci_epf_ntb
$ mkdir func0
$ tree func0
func0/
|-- baseclass_code
|-- cache_line_size
|-- ...
`-- vendorid
$ mkdir func0/attrs
$ tree func0
func0/
|-- attrs
| |-- db_count
| |-- mw1
| |-- mw2
| |-- mw3
| |-- mw4
| |-- num_mws
| `-- spad_count
|-- baseclass_code
|-- cache_line_size
|-- ...
`-- vendorid
At this point, the function can be started by linking the EP controller.
However, if the user mistakenly creates again a directory:
$ mkdir func0/attrs2
$ tree func0
func0/
|-- attrs
| |-- db_count
| |-- mw1
| |-- mw2
| |-- mw3
| |-- mw4
| |-- num_mws
| `-- spad_count
|-- attrs2
| |-- db_count
| |-- mw1
| |-- mw2
| |-- mw3
| |-- mw4
| |-- num_mws
| `-- spad_count
|-- baseclass_code
|-- cache_line_size
|-- ...
`-- vendorid
The endpoint function specific attributes are duplicated and cause a crash
when the endpoint function device is torn down:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 2 PID: 834 at lib/refcount.c:25 refcount_warn_saturate+0xc8/0x144
CPU: 2 PID: 834 Comm: rmdir Not tainted 6.3.0-rc1 #1
Hardware name: Pine64 RockPro64 v2.1 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
...
Call trace:
refcount_warn_saturate+0xc8/0x144
config_item_get+0x7c/0x80
configfs_rmdir+0x17c/0x30c
vfs_rmdir+0x8c/0x204
do_rmdir+0x158/0x184
__arm64_sys_unlinkat+0x64/0x80
invoke_syscall+0x48/0x114
...
Fix this by modifying pci_epf_cfs_work() to execute the new function
pci_ep_cfs_add_type_group() which itself calls pci_epf_type_add_cfs() to
obtain the function specific attribute group and the group name (directory
name) from the endpoint function driver. If the function driver defines an
attribute group, pci_ep_cfs_add_type_group() then proceeds to register this
group using configfs_register_group(), thus automatically exposing the
function type specific configfs attributes to the user. E.g.:
$ modprobe pci-epf-ntb
$ cd /sys/kernel/config/pci_ep/functions/pci_epf_ntb
$ mkdir func0
$ tree func0
func0/
|-- baseclass_code
|-- cache_line_size
|-- ...
|-- pci_epf_ntb.0
| |-- db_count
| |-- mw1
| |-- mw2
| |-- mw3
| |-- mw4
| |-- num_mws
| `-- spad_count
|-- primary
|-- ...
`-- vendorid
With this change, there is no need for the user to create or delete
directories in the endpoint function attributes directory. The
pci_epf_type_group_ops group operations are thus removed.
Also update the documentation for the pci-epf-ntb and pci-epf-vntb function
drivers to reflect this change, removing the explanations showing the need
to manually create the sub-directory for the function specific attributes.
Link: https://lore.kernel.org/r/20230415023542.77601-2-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
vNTB driver and NTB driver have same Kconfig prompt. Changed to make it
distinguishable.
Link: https://lore.kernel.org/r/20230202103832.2038286-1-mie@igel.co.jp
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
As xa_get_mark() returns false in case the entry is not present,
no need to redundantly check if vport is present. Remove the lookup.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Since mlx5_esw_query_vport_vhca_id() could be called either from
mlx5_esw_vport_enable() or mlx5_esw_vport_disable() where the
the check is done, this is always false here.
Remove the redundant check.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
is_ib_rep_supported()
is_mdev_switchdev_mode() check is done in is_eth_rep_supported().
Function is_ib_rep_supported() calls is_eth_rep_supported().
Remove the redundant check from it.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
is_ib_rep_supported()
MLX5_ESWITCH_MANAGER() check is done in is_eth_rep_supported().
Function is_ib_rep_supported() calls is_eth_rep_supported().
Remove the redundant check from it.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
On error flow resources being freed in esw_master_egress_destroy_resources()
but pointers not being set to null if error flow is from creating a
bounce rule. Then in esw_acl_egress_ofld_cleanup() we try to access already
freed pointers. Fix it by resetting the pointers to null.
Also if error is from creating a second or later bounce rule then the
flow group and table being used and cannot and should not be freed.
Add a check to destroy the flow group and table if there are no bounce
rules.
mlx5_core.sf mlx5_core.sf.2: mlx5_destroy_flow_group:2306:(pid 2235): Flow group 4 wasn't destroyed, refcount > 1
mlx5_core.sf mlx5_core.sf.2: mlx5_destroy_flow_table:2295:(pid 2235): Flow table 3 wasn't destroyed, refcount > 1
Fixes: 5e0202eb49ed ("net/mlx5: E-switch, Handle multiple master egress rules")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The function comment says what it is and the comment
is redundant.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When creating flow table for shared fdb resources, there is
only need to pass other_vport flag if vport is not 0 or
if the port is ECPF in BlueField.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
To allow devcom events on E-Switch that is not a vport group manager,
use vhca id as an index instead of device index which might be shared
between several E-Switches. for example SF and its PF.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add peer fdb rules for E-Switch that are vport managers or ecpf device.
It is not needed for other devices.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Device index is like PF index and limited to max physical ports.
For example, SFs created under PF the device index is the PF device index.
Use vhca_id which gets the FW index per vport, for vport rx rules
and vport pair events.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Remove duplicate function for checking if device has lag support.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The mlx5_is_reset_now_capable() function returns bool, not negative
error codes. So if fast teardown is not supported it should return
false instead of -EOPNOTSUPP.
Fixes: 92501fa6e421 ("net/mlx5: Ack on sync_reset_request only if PF can do reset_now")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
A member of struct mlx5_ifc_cmd_hca_cap_bits has been mistakenly
assigned the wrong reserved_at offset value. Correct it to align to the
right value, thus avoid future miscalculation.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Indent SFs probe code example in order to fix the below error:
Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst:57: ERROR: Unexpected indentation.
Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst:61: ERROR: Unexpected indentation.
Fixes: e71383fb9cd1 ("net/mlx5: Light probe local SFs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Automatic Verification <verifier@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
|
|
mlx5_eswitch_cleanup() is using esw right after freeing it for
releasing devlink_param.
Fix it by releasing the devlink_param before freeing the esw, and
adjust the create function accordingly.
Fixes: 3f90840305e2 ("net/mlx5: Move esw multiport devlink param to eswitch code")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Automatic Verification <verifier@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Dave Airlie reports that gcc-13.1.1 has started complaining about some
of the workqueue code in 32-bit arm builds:
kernel/workqueue.c: In function ‘get_work_pwq’:
kernel/workqueue.c:713:24: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
713 | return (void *)(data & WORK_STRUCT_WQ_DATA_MASK);
| ^
[ ... a couple of other cases ... ]
and while it's not immediately clear exactly why gcc started complaining
about it now, I suspect it's some C23-induced enum type handlign fixup in
gcc-13 is the cause.
Whatever the reason for starting to complain, the code and data types
are indeed disgusting enough that the complaint is warranted.
The wq code ends up creating various "helper constants" (like that
WORK_STRUCT_WQ_DATA_MASK) using an enum type, which is all kinds of
confused. The mask needs to be 'unsigned long', not some unspecified
enum type.
To make matters worse, the actual "mask and cast to a pointer" is
repeated a couple of times, and the cast isn't even always done to the
right pointer, but - as the error case above - to a 'void *' with then
the compiler finishing the job.
That's now how we roll in the kernel.
So create the masks using the proper types rather than some ambiguous
enumeration, and use a nice helper that actually does the type
conversion in one well-defined place.
Incidentally, this magically makes clang generate better code. That,
admittedly, is really just a sign of clang having been seriously
confused before, and cleaning up the typing unconfuses the compiler too.
Reported-by: Dave Airlie <airlied@gmail.com>
Link: https://lore.kernel.org/lkml/CAPM=9twNnV4zMCvrPkw3H-ajZOH-01JVh_kDrxdPYQErz8ZTdA@mail.gmail.com/
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.5/block-late
Pull MD fixes from Song.
* tag 'md-next-20230623' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
raid10: avoid spin_lock from fastpath from raid10_unplug()
md: fix 'delete_mutex' deadlock
md: use mddev->external to select holder in export_rdev()
md/raid1-10: fix casting from randomized structure in raid1_submit_write()
md/raid10: fix the condition to call bio_end_io_acct()
|
|
* for-next/feat_s1pie:
: Support for the Armv8.9 Permission Indirection Extensions (stage 1 only)
KVM: selftests: get-reg-list: add Permission Indirection registers
KVM: selftests: get-reg-list: support ID register features
arm64: Document boot requirements for PIE
arm64: transfer permission indirection settings to EL2
arm64: enable Permission Indirection Extension (PIE)
arm64: add encodings of PIRx_ELx registers
arm64: disable EL2 traps for PIE
arm64: reorganise PAGE_/PROT_ macros
arm64: add PTE_WRITE to PROT_SECT_NORMAL
arm64: add PTE_UXN/PTE_WRITE to SWAPPER_*_FLAGS
KVM: arm64: expose ID_AA64MMFR3_EL1 to guests
KVM: arm64: Save/restore PIE registers
KVM: arm64: Save/restore TCR2_EL1
arm64: cpufeature: add Permission Indirection Extension cpucap
arm64: cpufeature: add TCR2 cpucap
arm64: cpufeature: add system register ID_AA64MMFR3
arm64/sysreg: add PIR*_ELx registers
arm64/sysreg: update HCRX_EL2 register
arm64/sysreg: add system registers TCR2_ELx
arm64/sysreg: Add ID register ID_AA64MMFR3
|
|
'for-next/iss2-decode', 'for-next/kselftest', 'for-next/misc', 'for-next/feat_mops', 'for-next/module-alloc', 'for-next/sysreg', 'for-next/cpucap', 'for-next/acpi', 'for-next/kdump', 'for-next/acpi-doc', 'for-next/doc' and 'for-next/tpidr2-fix', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst
docs: perf: Add new description for HiSilicon UC PMU
drivers/perf: hisi: Add support for HiSilicon UC PMU driver
drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE
perf/arm-cmn: Add sysfs identifier
perf/arm-cmn: Revamp model detection
perf/arm_dmc620: Add cpumask
dt-bindings: perf: fsl-imx-ddr: Add i.MX93 compatible
drivers/perf: imx_ddr: Add support for NXP i.MX9 SoC DDRC PMU driver
perf/arm_cspmu: Decouple APMT dependency
perf/arm_cspmu: Clean up ACPI dependency
ACPI/APMT: Don't register invalid resource
perf/arm_cspmu: Fix event attribute type
perf: arm_cspmu: Set irq affinitiy only if overflow interrupt is used
drivers/perf: hisi: Don't migrate perf to the CPU going to teardown
drivers/perf: apple_m1: Force 63bit counters for M2 CPUs
perf/arm-cmn: Fix DTC reset
perf: qcom_l2_pmu: Make l2_cache_pmu_probe_cluster() more robust
perf/arm-cci: Slightly optimize cci_pmu_sync_counters()
* for-next/kpti:
: Simplify KPTI trampoline exit code
arm64: entry: Simplify tramp_alias macro and tramp_exit routine
arm64: entry: Preserve/restore X29 even for compat tasks
* for-next/missing-proto-warn:
: Address -Wmissing-prototype warnings
arm64: add alt_cb_patch_nops prototype
arm64: move early_brk64 prototype to header
arm64: signal: include asm/exception.h
arm64: kaslr: add kaslr_early_init() declaration
arm64: flush: include linux/libnvdimm.h
arm64: module-plts: inline linux/moduleloader.h
arm64: hide unused is_valid_bugaddr()
arm64: efi: add efi_handle_corrupted_x18 prototype
arm64: cpuidle: fix #ifdef for acpi functions
arm64: kvm: add prototypes for functions called in asm
arm64: spectre: provide prototypes for internal functions
arm64: move cpu_suspend_set_dbg_restorer() prototype to header
arm64: avoid prototype warnings for syscalls
arm64: add scs_patch_vmlinux prototype
arm64: xor-neon: mark xor_arm64_neon_*() static
* for-next/iss2-decode:
: Add decode of ISS2 to data abort reports
arm64/esr: Add decode of ISS2 to data abort reporting
arm64/esr: Use GENMASK() for the ISS mask
* for-next/kselftest:
: Various arm64 kselftest improvements
kselftest/arm64: Log signal code and address for unexpected signals
kselftest/arm64: Add a smoke test for ptracing hardware break/watch points
* for-next/misc:
: Miscellaneous patches
arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe
arm64: hibernate: remove WARN_ON in save_processor_state
arm64/fpsimd: Exit streaming mode when flushing tasks
arm64: mm: fix VA-range sanity check
arm64/mm: remove now-superfluous ISBs from TTBR writes
arm64: consolidate rox page protection logic
arm64: set __exception_irq_entry with __irq_entry as a default
arm64: syscall: unmask DAIF for tracing status
arm64: lockdep: enable checks for held locks when returning to userspace
arm64/cpucaps: increase string width to properly format cpucaps.h
arm64/cpufeature: Use helper for ECV CNTPOFF cpufeature
* for-next/feat_mops:
: Support for ARMv8.8 memcpy instructions in userspace
kselftest/arm64: add MOPS to hwcap test
arm64: mops: allow disabling MOPS from the kernel command line
arm64: mops: detect and enable FEAT_MOPS
arm64: mops: handle single stepping after MOPS exception
arm64: mops: handle MOPS exceptions
KVM: arm64: hide MOPS from guests
arm64: mops: don't disable host MOPS instructions from EL2
arm64: mops: document boot requirements for MOPS
KVM: arm64: switch HCRX_EL2 between host and guest
arm64: cpufeature: detect FEAT_HCX
KVM: arm64: initialize HCRX_EL2
* for-next/module-alloc:
: Make the arm64 module allocation code more robust (clean-up, VA range expansion)
arm64: module: rework module VA range selection
arm64: module: mandate MODULE_PLTS
arm64: module: move module randomization to module.c
arm64: kaslr: split kaslr/module initialization
arm64: kasan: remove !KASAN_VMALLOC remnants
arm64: module: remove old !KASAN_VMALLOC logic
* for-next/sysreg: (21 commits)
: More sysreg conversions to automatic generation
arm64/sysreg: Convert TRBIDR_EL1 register to automatic generation
arm64/sysreg: Convert TRBTRG_EL1 register to automatic generation
arm64/sysreg: Convert TRBMAR_EL1 register to automatic generation
arm64/sysreg: Convert TRBSR_EL1 register to automatic generation
arm64/sysreg: Convert TRBBASER_EL1 register to automatic generation
arm64/sysreg: Convert TRBPTR_EL1 register to automatic generation
arm64/sysreg: Convert TRBLIMITR_EL1 register to automatic generation
arm64/sysreg: Rename TRBIDR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBTRG_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBMAR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBSR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBBASER_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBPTR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBLIMITR_EL1 fields per auto-gen tools format
arm64/sysreg: Convert OSECCR_EL1 to automatic generation
arm64/sysreg: Convert OSDTRTX_EL1 to automatic generation
arm64/sysreg: Convert OSDTRRX_EL1 to automatic generation
arm64/sysreg: Convert OSLAR_EL1 to automatic generation
arm64/sysreg: Standardise naming of bitfield constants in OSL[AS]R_EL1
arm64/sysreg: Convert MDSCR_EL1 to automatic register generation
...
* for-next/cpucap:
: arm64 cpucap clean-up
arm64: cpufeature: fold cpus_set_cap() into update_cpu_capabilities()
arm64: cpufeature: use cpucap naming
arm64: alternatives: use cpucap naming
arm64: standardise cpucap bitmap names
* for-next/acpi:
: Various arm64-related ACPI patches
ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init()
* for-next/kdump:
: Simplify the crashkernel reservation behaviour of crashkernel=X,high on arm64
arm64: add kdump.rst into index.rst
Documentation: add kdump.rst to present crashkernel reservation on arm64
arm64: kdump: simplify the reservation behaviour of crashkernel=,high
* for-next/acpi-doc:
: Update ACPI documentation for Arm systems
Documentation/arm64: Update ACPI tables from BBR
Documentation/arm64: Update references in arm-acpi
Documentation/arm64: Update ARM and arch reference
* for-next/doc:
: arm64 documentation updates
Documentation/arm64: Add ptdump documentation
* for-next/tpidr2-fix:
: Fix the TPIDR2_EL0 register restoring on sigreturn
kselftest/arm64: Add a test case for TPIDR2 restore
arm64/signal: Restore TPIDR2 register rather than memory state
|
|
Due to the fact that TPIDR2 is intended to be managed by libc we don't
currently test modifying it via the signal context since that might
disrupt libc's usage of it and cause instability. We can however test the
opposite case with less risk, modifying TPIDR2 in a signal handler and
making sure that the original value is restored after returning from the
signal handler. Add a test which does this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230621-arm64-fix-tpidr2-signal-restore-v2-2-c8e8fcc10302@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently when restoring the TPIDR2 signal context we set the new value
from the signal frame in the thread data structure but not the register,
following the pattern for the rest of the data we are restoring. This does
not work in the case of TPIDR2, the register always has the value for the
current task. This means that either we return to userspace and ignore the
new value or we context switch and save the register value on top of the
newly restored value.
Load the value from the signal context into the register instead.
Fixes: 39e54499280f ("arm64/signal: Include TPIDR2 in the signal context")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # 6.3.x
Link: https://lore.kernel.org/r/20230621-arm64-fix-tpidr2-signal-restore-v2-1-c8e8fcc10302@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
ACPI r6.5, sec 6.5.4, describes how AML is unable to access an
OperationRegion unless _REG has been called to connect a handler:
The OS runs _REG control methods to inform AML code of a change in the
availability of an operation region. When an operation region handler is
unavailable, AML cannot access data fields in that region. (Operation
region writes will be ignored and reads will return indeterminate data.)
The PCI core does not call _REG at any time, leading to the undefined
behavior mentioned in the spec.
The spec explains that _REG should be executed to indicate whether a
given region can be accessed:
Once _REG has been executed for a particular operation region, indicating
that the operation region handler is ready, a control method can access
fields in the operation region. Conversely, control methods must not
access fields in operation regions when _REG method execution has not
indicated that the operation region handler is ready.
An example included in the spec demonstrates calling _REG when devices are
turned off: "when the host controller or bridge controller is turned off
or disabled, PCI Config Space Operation Regions for child devices are
no longer available. As such, ETH0’s _REG method will be run when it
is turned off and will again be run when PCI1 is turned off."
It is reported that ASMedia PCIe GPIO controllers fail functional tests
after the system has returning from suspend (S3 or s2idle). This is because
the BIOS checks whether the OSPM has called the _REG method to determine
whether it can interact with the OperationRegion assigned to the device as
part of the other AML called for the device.
To fix this issue, call acpi_evaluate_reg() when devices are transitioning
to D3cold or D0.
[bhelgaas: split pci_power_t checking to preliminary patch]
Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#reg-region
Link: https://lore.kernel.org/r/20230620140451.21007-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
Previously acpi_pci_set_power_state() assumed the requested power state was
valid (PCI_D0 ... PCI_D3cold). If a caller supplied something else, we
could index outside the state_conv[] array and pass junk to
acpi_device_set_power().
Validate the pci_power_t parameter and return -EINVAL if it's invalid.
Link: https://lore.kernel.org/r/20230621222857.GA122930@bhelgaas
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
The quirk for Elo i2 introduced in commit 92597f97a40b ("PCI/PM: Avoid
putting Elo i2 PCIe Ports in D3cold") is also needed by EloPOS E2/S2/H2
which uses the same Continental Z2 board.
Change the quirk to match the board instead of system.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215715
Link: https://lore.kernel.org/r/20230614074253.22318-1-linux@zary.sk
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
|
|
unevaluatedProperties: false"
Conor Dooley <conor@kernel.org> says:
From: Conor Dooley <conor.dooley@microchip.com>
Do the various bits needed to drop the additionalProperties: true that
we currently have in riscv/cpu.yaml, to permit actually enforcing what
people put in cpus nodes.
* b4-shazam-merge:
dt-bindings: riscv: cpus: switch to unevaluatedProperties: false
dt-bindings: riscv: cpus: add a ref the common cpu schema
Link: https://lore.kernel.org/r/20230615-creamer-emu-ade0fa0bdb68@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
During hibernation or restoration, freeze_secondary_cpus
checks num_online_cpus via BUG_ON, and the subsequent
save_processor_state also does the checking with WARN_ON.
In the case of CONFIG_PM_SLEEP_SMP=n, freeze_secondary_cpus
is not defined, but the sole possible condition to disable
CONFIG_PM_SLEEP_SMP is !SMP where num_online_cpus is always 1.
We also don't have to check it in save_processor_state.
So remove the unnecessary checking in save_processor_state.
Fixes: c0317210012e ("RISC-V: Add arch functions to support hibernation/suspend-to-disk")
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230609075049.2651723-4-songshuaishuai@tinylab.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
guoren@kernel.org <guoren@kernel.org> says:
From: Guo Ren <guoren@linux.alibaba.com>
This patch series adds independent irq/softirq stacks to decrease the
press of the thread stack. Also, add a thread STACK_SIZE config for
users to adjust the proper size during compile time.
* b4-shazam-merge:
riscv: stack: Add config of thread stack size
riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK
riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK
Link: https://lore.kernel.org/r/20230614013018.2168426-1-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
