summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-23Merge patch series "ISA string parser cleanups"Palmer Dabbelt
Conor Dooley <conor@kernel.org> says: From: Conor Dooley <conor.dooley@microchip.com> Here are some bits that were discussed with Drew on the "should we allow caps" threads that I have now created patches for: - splitting of riscv_of_processor_hartid() into two distinct functions, one for use purely during early boot, prior to the establishment of the possible-cpus mask & another to fit the other current use-cases - that then allows us to then completely skip some validation of the hartid in the parser - the biggest diff in the series is a rework of the comments in the parser, as I have mostly found the existing (sparse) ones to not be all that helpful whenever I have to go back and look at it - from writing the comments, I found a conditional doing a bit of a dance that I found counter-intuitive, so I've had a go at making that match what I would expect a little better - `i` implies 4 other extensions, so add them as extensions and set them for the craic. Sure why not like... * b4-shazam-merge: RISC-V: always report presence of extensions formerly part of the base ISA dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support RISC-V: remove decrement/increment dance in ISA string parser RISC-V: rework comments in ISA string parser RISC-V: validate riscv,isa at boot, not during ISA string parsing RISC-V: split early & late of_node to hartid mapping RISC-V: simplify register width check in ISA string parsing Link: https://lore.kernel.org/r/20230607-audacity-overhaul-82bb867a825f@spud Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-06-23Merge branch 'nand/next' into mtd/nextMiquel Raynal
2023-06-23raid10: avoid spin_lock from fastpath from raid10_unplug()Yu Kuai
Commit 0c0be98bbe67 ("md/raid10: prevent unnecessary calls to wake_up() in fast path") missed one place, for example, with: fio -direct=1 -rw=write/randwrite -iodepth=1 ... Plug and unplug are called for each io, then wake_up() from raid10_unplug() will cause lock contention as well. Avoid this contention by using wake_up_barrier() instead of wake_up(), where spin_lock is not held if waitqueue is empty. Fio test script: [global] name=random reads and writes ioengine=libaio direct=1 readwrite=randrw rwmixread=70 iodepth=64 buffered=0 filename=/dev/md0 size=1G runtime=30 time_based randrepeat=0 norandommap refill_buffers ramp_time=10 bs=4k numjobs=400 group_reporting=1 [job1] Test result with ramdisk raid10(By Ali): Before this patch With this patch READ IOPS=2033k IOPS=3642k WRITE IOPS=871k IOPS=1561K By the way, in this scenario, blk_plug_cb() will be allocated and freed for each io, this seems need to be optimized as well. Reported-and-tested-by: Ali Gholami Rudi <aligrudi@gmail.com> Closes: https://lore.kernel.org/all/20231606122233@laper.mirepesht/ Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230621105728.1268542-1-yukuai1@huaweicloud.com
2023-06-23md: fix 'delete_mutex' deadlockYu Kuai
Commit 3ce94ce5d05a ("md: fix duplicate filename for rdev") introduce a new lock 'delete_mutex', and trigger a new deadlock: t1: remove rdev t2: sysfs writer rdev_attr_store rdev_attr_store mddev_lock state_store md_kick_rdev_from_array lock delete_mutex list_add mddev->deleting unlock delete_mutex mddev_unlock mddev_lock ... lock delete_mutex kobject_del // wait for sysfs writers to be done mddev_unlock lock delete_mutex // wait for delete_mutex, deadlock 'delete_mutex' is used to protect the list 'mddev->deleting', turns out that this list can be protected by 'reconfig_mutex' directly, and this lock can be removed. Fix this problem by removing the lock, and use 'reconfig_mutex' to protect the list. mddev_unlock() will move this list to a local list to be handled after 'reconfig_mutex' is dropped. Fixes: 3ce94ce5d05a ("md: fix duplicate filename for rdev") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230621142933.1395629-1-yukuai1@huaweicloud.com
2023-06-23md: use mddev->external to select holder in export_rdev()Song Liu
mdadm test "10ddf-create-fail-rebuild" triggers warnings like the following [ 215.526357] ------------[ cut here ]------------ [ 215.527243] WARNING: CPU: 18 PID: 1264 at block/bdev.c:617 blkdev_put+0x269/0x350 [ 215.528334] Modules linked in: [ 215.528806] CPU: 18 PID: 1264 Comm: mdmon Not tainted 6.4.0-rc2+ #768 [ 215.529863] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS [ 215.531464] RIP: 0010:blkdev_put+0x269/0x350 [ 215.532167] Code: ff ff 49 8d 7d 10 e8 56 bf b8 ff 4d 8b 65 10 49 8d bc 24 58 05 00 00 e8 05 be b8 ff 41 83 ac 24 58 05 00 00 01 e9 44 ff ff ff <0f> 0b e9 52 fe ff ff 0f 0b e9 6b fe ff ff1 [ 215.534780] RSP: 0018:ffffc900040bfbf0 EFLAGS: 00010283 [ 215.535635] RAX: ffff888174001000 RBX: ffff88810b1c3b00 RCX: ffffffff819a4061 [ 215.536645] RDX: dffffc0000000000 RSI: dffffc0000000000 RDI: ffff88810b1c3ba0 [ 215.537657] RBP: ffff88810dbde800 R08: fffffbfff0fca983 R09: fffffbfff0fca983 [ 215.538674] R10: ffffc900040bfbf0 R11: fffffbfff0fca982 R12: ffff88810b1c3b38 [ 215.539687] R13: ffff88810b1c3b10 R14: ffff88810dbdecb8 R15: ffff88810b1c3b00 [ 215.540833] FS: 00007f2aabdff700(0000) GS:ffff888dfb400000(0000) knlGS:0000000000000000 [ 215.541961] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 215.542775] CR2: 00007fa19a85d934 CR3: 000000010c076006 CR4: 0000000000370ee0 [ 215.543814] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 215.544840] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 215.545885] Call Trace: [ 215.546257] <TASK> [ 215.546608] export_rdev.isra.63+0x71/0xe0 [ 215.547338] mddev_unlock+0x1b1/0x2d0 [ 215.547898] array_state_store+0x28d/0x450 [ 215.548519] md_attr_store+0xd7/0x150 [ 215.549059] ? __pfx_sysfs_kf_write+0x10/0x10 [ 215.549702] kernfs_fop_write_iter+0x1b9/0x260 [ 215.550351] vfs_write+0x491/0x760 [ 215.550863] ? __pfx_vfs_write+0x10/0x10 [ 215.551445] ? __fget_files+0x156/0x230 [ 215.552053] ksys_write+0xc0/0x160 [ 215.552570] ? __pfx_ksys_write+0x10/0x10 [ 215.553141] ? ktime_get_coarse_real_ts64+0xec/0x100 [ 215.553878] do_syscall_64+0x3a/0x90 [ 215.554403] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 215.555125] RIP: 0033:0x7f2aade11847 [ 215.555696] Code: c3 66 90 41 54 49 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 1b fd ff ff 4c 89 e2 48 89 ee 89 df 41 89 c0 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 448 [ 215.558398] RSP: 002b:00007f2aabdfeba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 215.559516] RAX: ffffffffffffffda RBX: 0000000000000010 RCX: 00007f2aade11847 [ 215.560515] RDX: 0000000000000005 RSI: 0000000000438b8b RDI: 0000000000000010 [ 215.561512] RBP: 0000000000438b8b R08: 0000000000000000 R09: 00007f2aaecf0060 [ 215.562511] R10: 000000000e3ba40b R11: 0000000000000293 R12: 0000000000000005 [ 215.563647] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000c70750 [ 215.564693] </TASK> [ 215.565029] irq event stamp: 15979 [ 215.565584] hardirqs last enabled at (15991): [<ffffffff811a7432>] __up_console_sem+0x52/0x60 [ 215.566806] hardirqs last disabled at (16000): [<ffffffff811a7417>] __up_console_sem+0x37/0x60 [ 215.568022] softirqs last enabled at (15716): [<ffffffff8277a2db>] __do_softirq+0x3eb/0x531 [ 215.569239] softirqs last disabled at (15711): [<ffffffff810d8f45>] irq_exit_rcu+0x115/0x160 [ 215.570434] ---[ end trace 0000000000000000 ]--- This means export_rdev() calls blkdev_put with a different holder than the one used by blkdev_get_by_dev(). This is because mddev->major_version == -2 is not a good check for external metadata. Fix this by using mddev->external instead. Also, do not clear mddev->external in md_clean(), as the flag might be used later in export_rdev(). Fixes: 2736e8eeb0cc ("block: use the holder as indication for exclusive opens") Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Song Liu <song@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230617052405.305871-1-song@kernel.org
2023-06-23binfmt_elf: fix comment typo s/reset/regset/Baruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/0b2967c4a4141875c493e835d5a6f8f2d19ae2d6.1687499804.git.baruch@tkos.co.il
2023-06-23elf: correct note name commentBaruch Siach
NT_PRFPREG note is named "CORE". Correct the comment accordingly. Fixes: 00e19ceec80b ("ELF: Add ELF program property parsing support") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/455b22b986de4d3bc6d9bfd522378e442943de5f.1687499411.git.baruch@tkos.co.il
2023-06-23md/raid1-10: fix casting from randomized structure in raid1_submit_write()Yu Kuai
Following build error triggered while build with clang version 17.0.0 with W=1(this can't be reporduced with gcc 13.1.0): drivers/md/raid1-10.c:117:25: error: casting from randomized structure pointer type 'struct block_device *' to 'struct md_rdev *' 117 | struct md_rdev *rdev = (struct md_rdev *)bio->bi_bdev; | ^ Fix this by casting 'bio->bi_bdev' to 'void *', as it used to be. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306142042.fmjfmTF8-lkp@intel.com/ Fixes: 8295efbe68c0 ("md/raid1-10: factor out a helper to submit normal write") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230616012136.3047071-1-yukuai1@huaweicloud.com
2023-06-23md/raid10: fix the condition to call bio_end_io_acct()Li Nan
/sys/block/[device]/queue/iostats is used to control whether to count io stat. Write 0 to it will clear queue_flags QUEUE_FLAG_IO_STAT which means iostats is disabled. If we disable iostats and later endable it, the io issued during this period will be counted incorrectly, inflight will be decreased to -1. //T1 set iostats echo 0 > /sys/block/md0/queue/iostats clear QUEUE_FLAG_IO_STAT //T2 issue io if (QUEUE_FLAG_IO_STAT) -> false bio_start_io_acct inflight++ echo 1 > /sys/block/md0/queue/iostats set QUEUE_FLAG_IO_STAT //T3 io end if (QUEUE_FLAG_IO_STAT) -> true bio_end_io_acct inflight-- -> -1 Also, if iostats is enabled while issuing io but disabled while io end, inflight will never be decreased. Fix it by checking start_time when io end. If start_time is not 0, call bio_end_io_acct(). Fixes: 528bc2cf2fcc ("md/raid10: enable io accounting") Signed-off-by: Li Nan <linan122@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230609094320.2397604-1-linan666@huaweicloud.com
2023-06-23regulator: Add Renesas PMIC RAA215300 driverBiju Das
The RAA215300 is a 9-channel PMIC that consists of * Internally compensated regulators * built-in Real Time Clock (RTC) * 32kHz crystal oscillator * coin cell battery charger The RTC on RAA215300 is similar to the IP found in the ISL1208. The existing driver for the ISL1208 works for this PMIC too, however the RAA215300 exposes two devices via I2C, one for the RTC IP, and one for everything else. The RTC IP has to be enabled by the other I2C device, therefore this driver is necessary to get the RTC to work. The external oscillator bit is inverted on PMIC version 0x11. Add PMIC RAA215300 driver for enabling RTC block and instantiating RTC device based on PMIC version. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/Message-Id: <20230623140948.384762-3-biju.das.jz@bp.renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-23regulator: dt-bindings: Add Renesas RAA215300 PMIC bindingsBiju Das
Document Renesas RAA215300 PMIC bindings. The RAA215300 is a high Performance 9-Channel PMIC supporting DDR Memory, with Built-In Charger and RTC. It supports DDR3, DDR3L, DDR4, and LPDDR4 memory power requirements. The internally compensated regulators, built-in Real-Time Clock (RTC), 32kHz crystal oscillator, and coin cell battery charger provide a highly integrated, small footprint power solution ideal for System-On-Module (SOM) applications. A spread spectrum feature provides an ease-of-use solution for noise-sensitive audio or RF applications. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/Message-Id: <20230623140948.384762-2-biju.das.jz@bp.renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-23ASoC: tas2781: Fix error code in tas2781_load_calibration()Dan Carpenter
Return -EINVAL instead of success on this error path. Fixes: 915f5eadebd2 ("ASoC: tas2781: firmware lib") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/Message-Id: <729bb6b3-bc1d-4b3d-8b65-077a492c753c@moroto.mountain> Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-23hwmon: (corsair-psu) various cleanupsWilken Gottwalt
Fix some typos, adjust documentation and comments to current state of knowledge and update coding style to be more uniform. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/ZJWf3H972hGgLK-8@monster.localdomain Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-23tracing: Fix warnings when building htmldocs for function graph retvalDonglin Peng
When building htmldocs, the following warnings appear: Documentation/trace/ftrace.rst:2797: WARNING: Literal block expected; none found. Documentation/trace/ftrace.rst:2816: WARNING: Literal block expected; none found. So fix it. Link: https://lore.kernel.org/all/20230623143517.19ffc6c0@canb.auug.org.au/ Link: https://lkml.kernel.org/r/20230623071728.25688-1-pengdonglin@sangfor.com.cn Fixes: 21c094d3f8a6 ("tracing: Add documentation for funcgraph-retval and funcgraph-retval-hex") Signed-off-by: Donglin Peng <pengdonglin@sangfor.com.cn> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-06-23dm ioctl: Refuse to create device named "." or ".."Demi Marie Obenour
Using either of these is going to greatly confuse userspace, as they are not valid symlink names and so creating the usual /dev/mapper/NAME symlink will not be possible. As creating a device with either of these names is almost certainly a userspace bug, just error out. Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-06-23dm ioctl: Refuse to create device named "control"Demi Marie Obenour
Typical userspace setups create a symlink under /dev/mapper with the name of the device, but /dev/mapper/control is reserved for DM's control device. Therefore, trying to create such a device is almost certain to be a userspace bug. Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-06-23dm ioctl: Avoid double-fetch of versionDemi Marie Obenour
The version is fetched once in check_version(), which then does some validation and then overwrites the version in userspace with the API version supported by the kernel. copy_params() then fetches the version from userspace *again*, and this time no validation is done. The result is that the kernel's version number is completely controllable by userspace, provided that userspace can win a race condition. Fix this flaw by not copying the version back to the kernel the second time. This is not exploitable as the version is not further used in the kernel. However, it could become a problem if future patches start relying on the version field. Cc: stable@vger.kernel.org Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-06-23dm ioctl: structs and parameter strings must not overlapDemi Marie Obenour
The NUL terminator for each target parameter string must precede the following 'struct dm_target_spec'. Otherwise, dm_split_args() might corrupt this struct. Furthermore, the first 'struct dm_target_spec' must come after the 'struct dm_ioctl', as if it overlaps too much dm_split_args() could corrupt the 'struct dm_ioctl'. Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-06-23dm ioctl: Avoid pointer arithmetic overflowDemi Marie Obenour
Especially on 32-bit systems, it is possible for the pointer arithmetic to overflow and cause a userspace pointer to be dereferenced in the kernel. Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-06-23dm ioctl: Check dm_target_spec is sufficiently alignedDemi Marie Obenour
Otherwise subsequent code, if given malformed input, could dereference a misaligned 'struct dm_target_spec *'. Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> # use %zu Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-06-23scsi/sg: don't grab scsi host module referenceYu Kuai
In order to prevent request_queue to be freed before cleaning up blktrace debugfs entries, commit db59133e9279 ("scsi: sg: fix blktrace debugfs entries leakage") use scsi_device_get(), however, scsi_device_get() will also grab scsi module reference and scsi module can't be removed. It's reported that blktests can't unload scsi_debug after block/001: blktests (master) # ./check block block/001 (stress device hotplugging) [failed] +++ /root/blktests/results/nodev/block/001.out.bad 2023-06-19 Running block/001 Stressing sd +modprobe: FATAL: Module scsi_debug is in use. Fix this problem by grabbing request_queue reference directly, so that scsi host module can still be unloaded while request_queue will be pinged by sg device. Reported-by: Chaitanya Kulkarni <chaitanyak@nvidia.com> Link: https://lore.kernel.org/all/1760da91-876d-fc9c-ab51-999a6f66ad50@nvidia.com/ Fixes: db59133e9279 ("scsi: sg: fix blktrace debugfs entries leakage") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230621160111.1433521-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-23io_uring: merge conditional unlock flush helpersPavel Begunkov
There is no reason not to use __io_cq_unlock_post_flush for intermediate aux CQE flushing, all ->task_complete should apply there, i.e. if set it should be the submitter task. Combine them, get rid of of __io_cq_unlock_post() and rename the left function. This place was also taking a couple percents of CPU according to profiles for max throughput net benchmarks due to multishot recv flooding it with completions. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/bbed60734cbec2e833d9c7bdcf9741aada5d8aab.1687518903.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-23io_uring: make io_cq_unlock_post staticPavel Begunkov
io_cq_unlock_post() is exclusively used in io_uring/io_uring.c, mark it static and don't expose to other files. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/3dc8127dda4514e1dd24bb32035faac887c5fa37.1687518903.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-23io_uring: inline __io_cq_unlockPavel Begunkov
__io_cq_unlock is not very helpful, and users should be calling flush variants anyway. Open code the function. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/d875c4cfb69f38ccecb58a57111446c77a614caa.1687518903.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-23io_uring: fix acquire/release annotationsPavel Begunkov
We do conditional locking, so __io_cq_lock() and friends not always actually grab/release the lock, so kill misleading annotations. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/2a098f9144c24cab622f8bf90b39f44da5d0401e.1687518903.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-23io_uring: kill io_cq_unlock()Pavel Begunkov
We're abusing ->completion_lock helpers. io_cq_unlock() neither locking conditionally nor doing CQE flushing, which means that callers must have some side reason of taking the lock and should do it directly. Open code io_cq_unlock() into io_cqring_overflow_kill() and clean it up. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/7dabb36856db2b562e78780480396c52c29b2bf4.1687518903.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-23io_uring: remove IOU_F_TWQ_FORCE_NORMALPavel Begunkov
Extract a function for non-local task_work_add, and use it directly from io_move_task_work_from_local(). Now we don't use IOU_F_TWQ_FORCE_NORMAL and it can be killed. As a small positive side effect we don't grab task->io_uring in io_req_normal_work_add anymore, which is not needed for io_req_local_work_add(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/2e55571e8ff2927ae3cc12da606d204e2485525b.1687518903.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-23io_uring: don't batch task put on reqs freePavel Begunkov
We're trying to batch io_put_task() in io_free_batch_list(), but considering that the hot path is a simple inc, it's most cerainly and probably faster to just do io_put_task() instead of task tracking. We don't care about io_put_task_remote() as it's only for IOPOLL where polling/waiting is done by not the submitter task. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/4a7ef7dce845fe2bd35507bf389d6bd2d5c1edf0.1687518903.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-23io_uring: move io_clean_op()Pavel Begunkov
Move io_clean_op() up in the source file and remove the forward declaration, as the function doesn't have tricky dependencies anymore. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/1b7163b2ba7c3a8322d972c79c1b0a9301b3057e.1687518903.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-23io_uring: inline io_dismantle_req()Pavel Begunkov
io_dismantle_req() is only used in __io_req_complete_post(), open code it there. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/ba8f20cb2c914eefa2e7d120a104a198552050db.1687518903.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-23io_uring: remove io_free_req_twPavel Begunkov
Request completion is a very hot path in general, but there are 3 places that can be doing it: io_free_batch_list(), io_req_complete_post() and io_free_req_tw(). io_free_req_tw() is used rather marginally and we don't care about it. Killing it can help to clean up and optimise the left two, do that by replacing it with io_req_task_complete(). There are two things to consider: 1) io_free_req() is called when all refs are put, so we need to reinit references. The easiest way to do that is to clear REQ_F_REFCOUNT. 2) We also don't need a cqe from it, so silence it with REQ_F_CQE_SKIP. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/434a2be8f33d474ad888ce1c17fe5ea7bbcb2a55.1687518903.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-23io_uring: open code io_put_req_find_nextPavel Begunkov
There is only one user of io_put_req_find_next() and it doesn't make much sense to have it. Open code the function. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/38b5c5e48e4adc8e6a0cd16fdd5c1531d7ff81a9.1687518903.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-23ext4: Fix warning in blkdev_put()Jan Kara
ext4_blkdev_remove() passes a wrong holder pointer to blkdev_put() which triggers a warning there. Fix it. Fixes: 2736e8eeb0cc ("block: use the holder as indication for exclusive opens") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230622165107.13687-1-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-23FS: JFS: Check for read-only mounted filesystem in txBeginImmad Mir
This patch adds a check for read-only mounted filesystem in txBegin before starting a transaction potentially saving from NULL pointer deref. Signed-off-by: Immad Mir <mirimmad17@gmail.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
2023-06-23FS: JFS: Fix null-ptr-deref Read in txBeginImmad Mir
Syzkaller reported an issue where txBegin may be called on a superblock in a read-only mounted filesystem which leads to NULL pointer deref. This could be solved by checking if the filesystem is read-only before calling txBegin, and returning with appropiate error code. Reported-By: syzbot+f1faa20eec55e0c8644c@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=be7e52c50c5182cc09a09ea6fc456446b2039de3 Signed-off-by: Immad Mir <mirimmad17@gmail.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
2023-06-23MIPS: OCTEON: octeon-usb: cleanup divider calculationLadislav Michl
Simple self-contained function is easier to review. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23MIPS: OCTEON: octeon-usb: introduce dwc3_octeon_{read,write}qLadislav Michl
Move all register access code into separate functions and provide their no-op version for non Octeon platforms. Later it might be possible to replace them with standard Linux functions, however datasheets are not publicly available and I have only one Octeon board to test, so lets stay on safe side for now. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23MIPS: OCTEON: octeon-usb: move gpio config to separate functionLadislav Michl
Power gpio configuration is using Octeon specific code, so move it to separate function, that can later be guarded with ifdefs. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23MIPS: OCTEON: octeon-usb: use bitfields for shim registerLadislav Michl
Use Linux standard bitfield access macros to manipulate shim register. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23MIPS: OCTEON: octeon-usb: use bitfields for host config registerLadislav Michl
Use Linux standard bitfield access macros to manipulate host config register. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23MIPS: OCTEON: octeon-usb: use bitfields for control registerLadislav Michl
Code needs to compile for all platforms in order to move it to drivers/usb/dwc3. Use Linux standard bitfield access macros to manipulate control register. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23MIPS: OCTEON: octeon-usb: add all register offsetsLadislav Michl
Glue code uses a mix of offset and absolute address register definition. Define all of them as offsets and use them consistently. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23mips: ralink: match all supported system controller compatible stringsShiji Yang
Recently, A new clock and reset controller driver has been introduced to the ralink mips target[1]. It provides proper system control and adds more SoC specific compatible strings. In order to better initialize CPUs, this patch removes the outdated "ralink,mt7620a-sysc" and add all dt-binding documented compatible strings to the system controller match table. [1] https://lore.kernel.org/all/20230619040941.1340372-1-sergio.paracuellos@gmail.com/ Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23MIPS: dec: prom: Address -Warray-bounds warningGustavo A. R. Silva
Zero-length arrays are deprecated, and we are replacing them with flexible array members instead. So, replace zero-length array with flexible-array member in struct memmap. Address the following warning found after building (with GCC-13) mips64 with decstation_64_defconfig: In function 'rex_setup_memory_region', inlined from 'prom_meminit' at arch/mips/dec/prom/memory.c:91:3: arch/mips/dec/prom/memory.c:72:31: error: array subscript i is outside array bounds of 'unsigned char[0]' [-Werror=array-bounds=] 72 | if (bm->bitmap[i] == 0xff) | ~~~~~~~~~~^~~ In file included from arch/mips/dec/prom/memory.c:16: ./arch/mips/include/asm/dec/prom.h: In function 'prom_meminit': ./arch/mips/include/asm/dec/prom.h:73:23: note: while referencing 'bitmap' 73 | unsigned char bitmap[0]; This helps with the ongoing efforts to globally enable -Warray-bounds. This results in no differences in binary output. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/323 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23MIPS: DTS: CI20: Raise VDDCORE voltage to 1.125 voltsPaul Cercueil
Commit 08384e80a70f ("MIPS: DTS: CI20: Fix ACT8600 regulator node names") caused the VDDCORE power supply (regulated by the ACT8600's DCDC1 output) to drop from a voltage of 1.2V configured by the bootloader, to the 1.1V set in the Device Tree. According to the documentation, the VDDCORE supply should be between 0.99V and 1.21V; both values are therefore within the supported range. However, VDDCORE being 1.1V results in the CI20 being very unstable, with corrupted memory, failures to boot, or reboots at random. The reason might be succint drops of the voltage below the minimum required. Raising the minimum voltage to 1.125 volts seems to be enough to address this issue, while still keeping a relatively low core voltage which helps for power consumption and thermals. Fixes: 08384e80a70f ("MIPS: DTS: CI20: Fix ACT8600 regulator node names") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23clk: ralink: mtmips: Fix uninitialized use of ret in ↵Nathan Chancellor
mtmips_register_{fixed,factor}_clocks() Clang warns: drivers/clk/ralink/clk-mtmips.c:309:9: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized] 309 | return ret; | ^~~ drivers/clk/ralink/clk-mtmips.c:285:9: note: initialize the variable 'ret' to silence this warning 285 | int ret, i; | ^ | = 0 drivers/clk/ralink/clk-mtmips.c:359:9: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized] 359 | return ret; | ^~~ drivers/clk/ralink/clk-mtmips.c:335:9: note: initialize the variable 'ret' to silence this warning 335 | int ret, i; | ^ | = 0 2 errors generated. Set ret to the return value of clk_hw_register_fixed_rate() using the PTR_ERR() macro, which ensures ret is not used uninitialized, clearing up the warning. Fixes: 6f3b15586eef ("clk: ralink: add clock and reset driver for MTMIPS SoCs") Closes: https://github.com/ClangBuiltLinux/linux/issues/1879 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23Merge tag 'at24-updates-for-v6.5' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-mergewindow at24 updates for v6.5 - use dev_err_probe() where applicable
2023-06-23i2c: imx-lpi2c: fix type char overflow issue when calculating the clock cycleClark Wang
Claim clkhi and clklo as integer type to avoid possible calculation errors caused by data overflow. Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver") Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Signed-off-by: Carlos Song <carlos.song@nxp.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23i2c: qup: Add missing unwind goto in qup_i2c_probe()Shuai Jiang
Smatch Warns: drivers/i2c/busses/i2c-qup.c:1784 qup_i2c_probe() warn: missing unwind goto? The goto label "fail_runtime" and "fail" will disable qup->pclk, but here qup->pclk failed to obtain, in order to be consistent, change the direct return to goto label "fail_dma". Fixes: 9cedf3b2f099 ("i2c: qup: Add bam dma capabilities") Signed-off-by: Shuai Jiang <d202180596@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Cc: <stable@vger.kernel.org> # v4.6+
2023-06-23dt-bindings: i2c: opencores: Add missing type for "regstep"Rob Herring
"regstep" may be deprecated, but it still needs a type. Fixes: 8ad69f490516 ("dt-bindings: i2c: convert ocores binding to yaml") Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Peter Korsgaard <peter@korsgaard.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-15 07:44:07 +0000