summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-09wireguard: noise: take lock when removing handshake entry from tableJason A. Donenfeld
Eric reported that syzkaller found a race of this variety: CPU 1 CPU 2 -------------------------------------------|--------------------------------------- wg_index_hashtable_replace(old, ...) | if (hlist_unhashed(&old->index_hash)) | | wg_index_hashtable_remove(old) | hlist_del_init_rcu(&old->index_hash) | old->index_hash.pprev = NULL hlist_replace_rcu(&old->index_hash, ...) | *old->index_hash.pprev | Syzbot wasn't actually able to reproduce this more than once or create a reproducer, because the race window between checking "hlist_unhashed" and calling "hlist_replace_rcu" is just so small. Adding an mdelay(5) or similar there helps make this demonstrable using this simple script: #!/bin/bash set -ex trap 'kill $pid1; kill $pid2; ip link del wg0; ip link del wg1' EXIT ip link add wg0 type wireguard ip link add wg1 type wireguard wg set wg0 private-key <(wg genkey) listen-port 9999 wg set wg1 private-key <(wg genkey) peer $(wg show wg0 public-key) endpoint 127.0.0.1:9999 persistent-keepalive 1 wg set wg0 peer $(wg show wg1 public-key) ip link set wg0 up yes link set wg1 up | ip -force -batch - & pid1=$! yes link set wg1 down | ip -force -batch - & pid2=$! wait The fundumental underlying problem is that we permit calls to wg_index_ hashtable_remove(handshake.entry) without requiring the caller to take the handshake mutex that is intended to protect members of handshake during mutations. This is consistently the case with calls to wg_index_ hashtable_insert(handshake.entry) and wg_index_hashtable_replace( handshake.entry), but it's missing from a pertinent callsite of wg_ index_hashtable_remove(handshake.entry). So, this patch makes sure that mutex is taken. The original code was a little bit funky though, in the form of: remove(handshake.entry) lock(), memzero(handshake.some_members), unlock() remove(handshake.entry) The original intention of that double removal pattern outside the lock appears to be some attempt to prevent insertions that might happen while locks are dropped during expensive crypto operations, but actually, all callers of wg_index_hashtable_insert(handshake.entry) take the write lock and then explicitly check handshake.state, as they should, which the aforementioned memzero clears, which means an insertion should already be impossible. And regardless, the original intention was necessarily racy, since it wasn't guaranteed that something else would run after the unlock() instead of after the remove(). So, from a soundness perspective, it seems positive to remove what looks like a hack at best. The crash from both syzbot and from the script above is as follows: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 7395 Comm: kworker/0:3 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: wg-kex-wg1 wg_packet_handshake_receive_worker RIP: 0010:hlist_replace_rcu include/linux/rculist.h:505 [inline] RIP: 0010:wg_index_hashtable_replace+0x176/0x330 drivers/net/wireguard/peerlookup.c:174 Code: 00 fc ff df 48 89 f9 48 c1 e9 03 80 3c 01 00 0f 85 44 01 00 00 48 b9 00 00 00 00 00 fc ff df 48 8b 45 10 48 89 c6 48 c1 ee 03 <80> 3c 0e 00 0f 85 06 01 00 00 48 85 d2 4c 89 28 74 47 e8 a3 4f b5 RSP: 0018:ffffc90006a97bf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888050ffc4f8 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88808e04e010 RBP: ffff88808e04e000 R08: 0000000000000001 R09: ffff8880543d0000 R10: ffffed100a87a000 R11: 000000000000016e R12: ffff8880543d0000 R13: ffff88808e04e008 R14: ffff888050ffc508 R15: ffff888050ffc500 FS: 0000000000000000(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f5505db0 CR3: 0000000097cf7000 CR4: 00000000001526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: wg_noise_handshake_begin_session+0x752/0xc9a drivers/net/wireguard/noise.c:820 wg_receive_handshake_packet drivers/net/wireguard/receive.c:183 [inline] wg_packet_handshake_receive_worker+0x33b/0x730 drivers/net/wireguard/receive.c:220 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/wireguard/20200908145911.4090480-1-edumazet@google.com/ Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09cxgb4/ch_ipsec: Registering xfrmdev_ops with cxgb4Ayush Sawal
As ch_ipsec was removed without clearing xfrmdev_ops and netdev feature(esp-hw-offload). When a recalculation of netdev feature is triggered by changing tls feature(tls-hw-tx-offload) from user request, it causes a page fault due to absence of valid xfrmdev_ops. Fixes: 6dad4e8ab3ec ("chcr: Add support for Inline IPSec") Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09perf: Stop using deprecated bpf_program__title()Andrii Nakryiko
Switch from deprecated bpf_program__title() API to bpf_program__section_name(). Also drop unnecessary error checks because neither bpf_program__title() nor bpf_program__section_name() can fail or return NULL. Fixes: 521095842027 ("libbpf: Deprecate notion of BPF program "title" in favor of "section name"") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/bpf/20200908180127.1249-1-andriin@fb.com
2020-09-09Merge branch 'ksz9477-dsa-switch-driver-improvements'David S. Miller
Paul Barker says: ==================== ksz9477 dsa switch driver improvements These changes were made while debugging the ksz9477 driver for use on a custom board which uses the ksz9893 switch supported by this driver. The patches have been runtime tested on top of Linux 5.8.4, I couldn't runtime test them on top of 5.9-rc3 due to unrelated issues. They have been build tested on top of net-next. These changes can also be pulled from: https://gitlab.com/pbarker.dev/staging/linux.git tag: for-net-next/ksz-v3_2020-09-09 Changes from v2: * Fixed incorrect type in assignment error. Reported-by: kernel test robot <lkp@intel.com> Changes from v1: * Rebased onto net-next. * Dropped unnecessary `#include <linux/printk.h>`. * Instead of printing the phy mode in `ksz9477_port_setup()`, modify the existing print in `ksz9477_config_cpu_port()` to always produce output and to be more clear. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: dsa: microchip: Implement recommended reset timingPaul Barker
The datasheet for the ksz9893 and ksz9477 switches recommend waiting at least 100us after the de-assertion of reset before trying to program the device through any interface. Also switch the existing msleep() call to usleep_range() as recommended in Documentation/timers/timers-howto.rst. The 2ms range used here is somewhat arbitrary, as long as the reset is asserted for at least 10ms we should be ok. Signed-off-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: dsa: microchip: Disable RGMII in-band status on KSZ9893Paul Barker
We can't assume that the link partner supports the in-band status reporting which is enabled by default on the KSZ9893 when using RGMII for the upstream port. Signed-off-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: dsa: microchip: Improve phy mode messagePaul Barker
Always print the selected phy mode for the CPU port when using the ksz9477 driver. If the phy mode was changed, also print the previous mode to aid in debugging. To make the message more clear, prefix it with the port number which it applies to and improve the language a little. Signed-off-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: dsa: microchip: Make switch detection more informativePaul Barker
To make switch detection more informative print the result of the ksz9477/ksz9893 compatibility check. With debug output enabled also print the contents of the Chip ID registers as a 40-bit hex string. As this detection is the first communication with the switch performed by the driver, making it easy to see any errors here will help identify issues with SPI data corruption or reset sequencing. Signed-off-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09selftests/bpf: Fix test_sysctl_loop{1, 2} failure due to clang changeYonghong Song
Andrii reported that with latest clang, when building selftests, we have error likes: error: progs/test_sysctl_loop1.c:23:16: in function sysctl_tcp_mem i32 (%struct.bpf_sysctl*): Looks like the BPF stack limit of 512 bytes is exceeded. Please move large on stack variables into BPF per-cpu array map. The error is triggered by the following LLVM patch: https://reviews.llvm.org/D87134 For example, the following code is from test_sysctl_loop1.c: static __always_inline int is_tcp_mem(struct bpf_sysctl *ctx) { volatile char tcp_mem_name[] = "net/ipv4/tcp_mem/very_very_very_very_long_pointless_string"; ... } Without the above LLVM patch, the compiler did optimization to load the string (59 bytes long) with 7 64bit loads, 1 8bit load and 1 16bit load, occupying 64 byte stack size. With the above LLVM patch, the compiler only uses 8bit loads, but subregister is 32bit. So stack requirements become 4 * 59 = 236 bytes. Together with other stuff on the stack, total stack size exceeds 512 bytes, hence compiler complains and quits. To fix the issue, removing "volatile" key word or changing "volatile" to "const"/"static const" does not work, the string is put in .rodata.str1.1 section, which libbpf did not process it and errors out with libbpf: elf: skipping unrecognized data section(6) .rodata.str1.1 libbpf: prog 'sysctl_tcp_mem': bad map relo against '.L__const.is_tcp_mem.tcp_mem_name' in section '.rodata.str1.1' Defining the string const as global variable can fix the issue as it puts the string constant in '.rodata' section which is recognized by libbpf. In the future, when libbpf can process '.rodata.str*.*' properly, the global definition can be changed back to local definition. Defining tcp_mem_name as a global, however, triggered a verifier failure. ./test_progs -n 7/21 libbpf: load bpf program failed: Permission denied libbpf: -- BEGIN DUMP LOG --- libbpf: invalid stack off=0 size=1 verification time 6975 usec stack depth 160+64 processed 889 insns (limit 1000000) max_states_per_insn 4 total_states 14 peak_states 14 mark_read 10 libbpf: -- END LOG -- libbpf: failed to load program 'sysctl_tcp_mem' libbpf: failed to load object 'test_sysctl_loop2.o' test_bpf_verif_scale:FAIL:114 #7/21 test_sysctl_loop2.o:FAIL This actually exposed a bpf program bug. In test_sysctl_loop{1,2}, we have code like const char tcp_mem_name[] = "<...long string...>"; ... char name[64]; ... for (i = 0; i < sizeof(tcp_mem_name); ++i) if (name[i] != tcp_mem_name[i]) return 0; In the above code, if sizeof(tcp_mem_name) > 64, name[i] access may be out of bound. The sizeof(tcp_mem_name) is 59 for test_sysctl_loop1.c and 79 for test_sysctl_loop2.c. Without promotion-to-global change, old compiler generates code where the overflowed stack access is actually filled with valid value, so hiding the bpf program bug. With promotion-to-global change, the code is different, more specifically, the previous loading constants to stack is gone, and "name" occupies stack[-64:0] and overflow access triggers a verifier error. To fix the issue, adjust "name" buffer size properly. Reported-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200909171542.3673449-1-yhs@fb.com
2020-09-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Rewrite inner header IPv6 in ICMPv6 messages in ip6t_NPT, from Michael Zhou. 2) do_ip_vs_set_ctl() dereferences uninitialized value, from Peilin Ye. 3) Support for userdata in tables, from Jose M. Guisado. 4) Do not increment ct error and invalid stats at the same time, from Florian Westphal. 5) Remove ct ignore stats, also from Florian. 6) Add ct stats for clash resolution, from Florian Westphal. 7) Bump reference counter bump on ct clash resolution only, this is safe because bucket lock is held, again from Florian. 8) Use ip_is_fragment() in xt_HMARK, from YueHaibing. 9) Add wildcard support for nft_socket, from Balazs Scheidler. 10) Remove superfluous IPVS dependency on iptables, from Yaroslav Bolyukin. 11) Remove unused definition in ebt_stp, from Wang Hai. 12) Replace CONFIG_NFT_CHAIN_NAT_{IPV4,IPV6} by CONFIG_NFT_NAT in selftests/net, from Fabian Frederick. 13) Add userdata support for nft_object, from Jose M. Guisado. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09hsr: avoid newline at end of message in NL_SET_ERR_MSG_MODYe Bin
clean follow coccicheck warning: net//hsr/hsr_netlink.c:94:8-42: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD net//hsr/hsr_netlink.c:87:30-57: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD net//hsr/hsr_netlink.c:79:29-53: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09Merge tag 'nfs-for-5.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: - Fix an NFS/RDMA resource leak - Fix the error handling during delegation recall - NFSv4.0 needs to return the delegation on a zero-stateid SETATTR - Stop printk reading past end of string * tag 'nfs-for-5.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: stop printk reading past end of string NFS: Zero-stateid SETATTR should first return delegation NFSv4.1 handle ERR_DELAY error reclaiming locking state on delegation recall xprtrdma: Release in-flight MRs on disconnect
2020-09-09Merge branch 'net-skb_put_padto-fixes'David S. Miller
Eric Dumazet says: ==================== net: skb_put_padto() fixes sysbot reported a bug in qrtr leading to use-after-free. First patch fixes the issue. Second patch addes __must_check attribute to avoid similar issues in the future. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: add __must_check to skb_put_padto()Eric Dumazet
skb_put_padto() and __skb_put_padto() callers must check return values or risk use-after-free. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: qrtr: check skb_put_padto() return valueEric Dumazet
If skb_put_padto() returns an error, skb has been freed. Better not touch it anymore, as reported by syzbot [1] Note to qrtr maintainers : this suggests qrtr_sendmsg() should adjust sock_alloc_send_skb() second parameter to account for the potential added alignment to avoid reallocation. [1] BUG: KASAN: use-after-free in __skb_insert include/linux/skbuff.h:1907 [inline] BUG: KASAN: use-after-free in __skb_queue_before include/linux/skbuff.h:2016 [inline] BUG: KASAN: use-after-free in __skb_queue_tail include/linux/skbuff.h:2049 [inline] BUG: KASAN: use-after-free in skb_queue_tail+0x6b/0x120 net/core/skbuff.c:3146 Write of size 8 at addr ffff88804d8ab3c0 by task syz-executor.4/4316 CPU: 1 PID: 4316 Comm: syz-executor.4 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1d6/0x29e lib/dump_stack.c:118 print_address_description+0x66/0x620 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report+0x132/0x1d0 mm/kasan/report.c:530 __skb_insert include/linux/skbuff.h:1907 [inline] __skb_queue_before include/linux/skbuff.h:2016 [inline] __skb_queue_tail include/linux/skbuff.h:2049 [inline] skb_queue_tail+0x6b/0x120 net/core/skbuff.c:3146 qrtr_tun_send+0x1a/0x40 net/qrtr/tun.c:23 qrtr_node_enqueue+0x44f/0xc00 net/qrtr/qrtr.c:364 qrtr_bcast_enqueue+0xbe/0x140 net/qrtr/qrtr.c:861 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] sock_write_iter+0x317/0x470 net/socket.c:998 call_write_iter include/linux/fs.h:1882 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0xa96/0xd10 fs/read_write.c:578 ksys_write+0x11b/0x220 fs/read_write.c:631 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45d5b9 Code: 5d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f84b5b81c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000038b40 RCX: 000000000045d5b9 RDX: 0000000000000055 RSI: 0000000020001240 RDI: 0000000000000003 RBP: 00007f84b5b81ca0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000f R13: 00007ffcbbf86daf R14: 00007f84b5b829c0 R15: 000000000118cf4c Allocated by task 4316: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc+0x100/0x130 mm/kasan/common.c:461 slab_post_alloc_hook+0x3e/0x290 mm/slab.h:518 slab_alloc mm/slab.c:3312 [inline] kmem_cache_alloc+0x1c1/0x2d0 mm/slab.c:3482 skb_clone+0x1b2/0x370 net/core/skbuff.c:1449 qrtr_bcast_enqueue+0x6d/0x140 net/qrtr/qrtr.c:857 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] sock_write_iter+0x317/0x470 net/socket.c:998 call_write_iter include/linux/fs.h:1882 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0xa96/0xd10 fs/read_write.c:578 ksys_write+0x11b/0x220 fs/read_write.c:631 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 4316: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xdd/0x110 mm/kasan/common.c:422 __cache_free mm/slab.c:3418 [inline] kmem_cache_free+0x82/0xf0 mm/slab.c:3693 __skb_pad+0x3f5/0x5a0 net/core/skbuff.c:1823 __skb_put_padto include/linux/skbuff.h:3233 [inline] skb_put_padto include/linux/skbuff.h:3252 [inline] qrtr_node_enqueue+0x62f/0xc00 net/qrtr/qrtr.c:360 qrtr_bcast_enqueue+0xbe/0x140 net/qrtr/qrtr.c:861 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] sock_write_iter+0x317/0x470 net/socket.c:998 call_write_iter include/linux/fs.h:1882 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0xa96/0xd10 fs/read_write.c:578 ksys_write+0x11b/0x220 fs/read_write.c:631 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff88804d8ab3c0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 0 bytes inside of 224-byte region [ffff88804d8ab3c0, ffff88804d8ab4a0) The buggy address belongs to the page: page:00000000ea8cccfb refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88804d8abb40 pfn:0x4d8ab flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0002237ec8 ffffea00029b3388 ffff88821bb66800 raw: ffff88804d8abb40 ffff88804d8ab000 000000010000000b 0000000000000000 page dumped because: kasan: bad access detected Fixes: ce57785bf91b ("net: qrtr: fix len of skb_put_padto in qrtr_node_enqueue") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Carl Huang <cjhuang@codeaurora.org> Cc: Wen Gong <wgong@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09IB/isert: Fix unaligned immediate-data handlingSagi Grimberg
Currently we allocate rx buffers in a single contiguous buffers for headers (iser and iscsi) and data trailer. This means that most likely the data starting offset is aligned to 76 bytes (size of both headers). This worked fine for years, but at some point this broke, resulting in data corruptions in isert when a command comes with immediate data and the underlying backend device assumes 512 bytes buffer alignment. We assume a hard-requirement for all direct I/O buffers to be 512 bytes aligned. To fix this, we should avoid passing unaligned buffers for I/O. Instead, we allocate our recv buffers with some extra space such that we can have the data portion align to 512 byte boundary. This also means that we cannot reference headers or data using structure but rather accessors (as they may move based on alignment). Also, get rid of the wrong __packed annotation from iser_rx_desc as this has only harmful effects (not aligned to anything). This affects the rx descriptors for iscsi login and data plane. Fixes: 3d75ca0adef4 ("block: introduce multi-page bvec helpers") Link: https://lore.kernel.org/r/20200904195039.31687-1-sagi@grimberg.me Reported-by: Stephen Rust <srust@blockbridge.com> Tested-by: Doug Dumitru <doug@dumitru.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-09RDMA/rtrs-srv: Set .release function for rtrs srv device during device initMd Haris Iqbal
The device .release function was not being set during the device initialization. This was leading to the below warning, in error cases when put_srv was called before device_add was called. Warning: Device '(null)' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt. So, set the device .release function during device initialization in the __alloc_srv() function. Fixes: baa5b28b7a47 ("RDMA/rtrs-srv: Replace device_register with device_initialize and device_add") Link: https://lore.kernel.org/r/20200907102216.104041-1-haris.iqbal@cloud.ionos.com Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-09RDMA/bnxt_re: Remove set but not used variable 'qplib_ctx'YueHaibing
drivers/infiniband/hw/bnxt_re/main.c:1012:25: warning: variable ‘qplib_ctx’ set but not used [-Wunused-but-set-variable] Fixes: f86b31c6a28f ("RDMA/bnxt_re: Static NQ depth allocation") Link: https://lore.kernel.org/r/20200905121624.32776-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-09block: Set same_page to false in __bio_try_merge_page if ret is falseRitesh Harjani
If we hit the UINT_MAX limit of bio->bi_iter.bi_size and so we are anyway not merging this page in this bio, then it make sense to make same_page also as false before returning. Without this patch, we hit below WARNING in iomap. This mostly happens with very large memory system and / or after tweaking vm dirty threshold params to delay writeback of dirty data. WARNING: CPU: 18 PID: 5130 at fs/iomap/buffered-io.c:74 iomap_page_release+0x120/0x150 CPU: 18 PID: 5130 Comm: fio Kdump: loaded Tainted: G W 5.8.0-rc3 #6 Call Trace: __remove_mapping+0x154/0x320 (unreliable) iomap_releasepage+0x80/0x180 try_to_release_page+0x94/0xe0 invalidate_inode_page+0xc8/0x110 invalidate_mapping_pages+0x1dc/0x540 generic_fadvise+0x3c8/0x450 xfs_file_fadvise+0x2c/0xe0 [xfs] vfs_fadvise+0x3c/0x60 ksys_fadvise64_64+0x68/0xe0 sys_fadvise64+0x28/0x40 system_call_exception+0xf8/0x1c0 system_call_common+0xf0/0x278 Fixes: cc90bc68422 ("block: fix "check bi_size overflow before merge"") Reported-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-09spi: stm32: fix pm_runtime_get_sync() error checkingDan Carpenter
The pm_runtime_get_sync() can return either 0 or 1 on success but this code treats 1 as a failure. Fixes: db96bf976a4f ("spi: stm32: fixes suspend/resume management") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Alain Volmat <alain.volmat@st.com> Link: https://lore.kernel.org/r/20200909094304.GA420136@mwanda Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-09spi: Fix memory leak on splited transfersGustav Wiklander
In the prepare_message callback the bus driver has the opportunity to split a transfer into smaller chunks. spi_map_msg is done after prepare_message. Function spi_res_release releases the splited transfers in the message. Therefore spi_res_release should be called after spi_map_msg. The previous try at this was commit c9ba7a16d0f1 which released the splited transfers after spi_finalize_current_message had been called. This introduced a race since the message struct could be out of scope because the spi_sync call got completed. Fixes this leak on spi bus driver spi-bcm2835.c when transfer size is greater than 65532: Kmemleak: sg_alloc_table+0x28/0xc8 spi_map_buf+0xa4/0x300 __spi_pump_messages+0x370/0x748 __spi_sync+0x1d4/0x270 spi_sync+0x34/0x58 spi_test_execute_msg+0x60/0x340 [spi_loopback_test] spi_test_run_iter+0x548/0x578 [spi_loopback_test] spi_test_run_test+0x94/0x140 [spi_loopback_test] spi_test_run_tests+0x150/0x180 [spi_loopback_test] spi_loopback_test_probe+0x50/0xd0 [spi_loopback_test] spi_drv_probe+0x84/0xe0 Signed-off-by: Gustav Wiklander <gustavwi@axis.com> Link: https://lore.kernel.org/r/20200908151129.15915-1-gustav.wiklander@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-09Drivers: hv: vmbus: hibernation: do not hang forever in vmbus_bus_resume()Dexuan Cui
After we Stop and later Start a VM that uses Accelerated Networking (NIC SR-IOV), currently the VF vmbus device's Instance GUID can change, so after vmbus_bus_resume() -> vmbus_request_offers(), vmbus_onoffer() can not find the original vmbus channel of the VF, and hence we can't complete() vmbus_connection.ready_for_resume_event in check_ready_for_resume_event(), and the VM hangs in vmbus_bus_resume() forever. Fix the issue by adding a timeout, so the resuming can still succeed, and the saved state is not lost, and according to my test, the user can disable Accelerated Networking and then will be able to SSH into the VM for further recovery. Also prevent the VM in question from suspending again. The host will be fixed so in future the Instance GUID will stay the same across hibernation. Fixes: d8bd2d442bb2 ("Drivers: hv: vmbus: Resume after fixing up old primary channels") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20200905025555.45614-1-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-09-09thunderbolt: Retry DROM read once if parsing failsMika Westerberg
Kai-Heng reported that sometimes DROM parsing of ASUS PA27AC Thunderbolt 3 monitor fails. This makes the driver to fail to add the device so only DisplayPort tunneling is functional. It is not clear what exactly happens but waiting for 100 ms and retrying the read seems to work this around so we do that here. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206493 Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-09-09ALSA: hda/realtek - The Mic on a RedmiBook doesn't workHui Wang
The Mic connects to the Nid 0x19, but the configuration of Nid 0x19 is not defined to Mic, and also need to set the coeff to enable the auto detection on the Nid 0x19. After this change, the Mic plugging in or plugging out could be detected and could record the sound from the Mic. And the coeff value is suggested by Kailang of Realtek. Cc: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20200909020041.8967-1-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-09-09i2c: algo: pca: Reapply i2c bus settings after resetEvan Nimmo
If something goes wrong (such as the SCL being stuck low) then we need to reset the PCA chip. The issue with this is that on reset we lose all config settings and the chip ends up in a disabled state which results in a lock up/high CPU usage. We need to re-apply any configuration that had previously been set and re-enable the chip. Signed-off-by: Evan Nimmo <evan.nimmo@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-09Merge tag 'at24-fixes-for-v5.9-rc5' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current at24 fixes for v5.9-rc5 - delay registration of the nvmem provider until after power is enabled
2020-09-09x86/defconfigs: Explicitly unset CONFIG_64BIT in i386_defconfigDaniel Díaz
A recent refresh of the defconfigs got rid of the following (unset) config: # CONFIG_64BIT is not set Innocuous as it seems, when the config file is saved again the behavior is changed so that CONFIG_64BIT=y. Currently, $ make i386_defconfig $ grep CONFIG_64BIT .config CONFIG_64BIT=y whereas previously (and with this patch): $ make i386_defconfig $ grep CONFIG_64BIT .config # CONFIG_64BIT is not set ( This was found with weird compiler errors on OpenEmbedded builds, as the compiler was unable to cope with 64-bits data types. ) Fixes: 1d0e12fd3a84 ("x86/defconfigs: Refresh defconfig files") Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-09-09rtlwifi: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. The only file where some GFP_ flags are updated is 'pci.c'. When memory is allocated in '_rtl_pci_init_tx_ring()' and '_rtl_pci_init_rx_ring()' GFP_KERNEL can be used because both functions are called from a probe function and no spinlock is taken. The call chain is: rtl_pci_probe --> rtl_pci_init --> _rtl_pci_init_trx_ring --> _rtl_pci_init_rx_ring --> _rtl_pci_init_tx_ring @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200907193828.318233-1-christophe.jaillet@wanadoo.fr
2020-09-09brcmsmac: fix memory leak in wlc_phy_attach_lcnphyKeita Suzuki
When wlc_phy_txpwr_srom_read_lcnphy fails in wlc_phy_attach_lcnphy, the allocated pi->u.pi_lcnphy is leaked, since struct brcms_phy will be freed in the caller function. Fix this by calling wlc_phy_detach_lcnphy in the error handler of wlc_phy_txpwr_srom_read_lcnphy before returning. Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200908121743.23108-1-keitasuzuki.park@sslab.ics.keio.ac.jp
2020-09-09mwifiex: remove function pointer checkTom Rix
clang static analyzer reports this problem init.c:739:8: warning: Called function pointer is null (null dereference) ret = adapter->if_ops.check_fw_status( ... ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In mwifiex_dnld_fw, there is an earlier check for check_fw_status(), The check was introduced for usb support at the same time this check in _mwifiex_fw_dpc() was made if (adapter->if_ops.dnld_fw) { ret = adapter->if_ops.dnld_fw(adapter, &fw); } else { ret = mwifiex_dnld_fw(adapter, &fw); } And a dnld_fw function initialized as part the usb's mwifiex_if_ops. The other instances of mwifiex_if_ops for pci and sdio both set check_fw_status. So the first check is not needed and can be removed. Fixes: 4daffe354366 ("mwifiex: add support for Marvell USB8797 chipset") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200906200548.18053-1-trix@redhat.com
2020-09-09rtl8xxxu: prevent potential memory leakChris Chiu
Free the skb if usb_submit_urb fails on rx_urb. And free the urb no matter usb_submit_urb succeeds or not in rtl8xxxu_submit_int_urb. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200906040424.22022-1-chiu@endlessm.com
2020-09-09rtlwifi: rtl8723ae: Delete a stray tabDan Carpenter
This line is indented too far. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200905124758.GB183976@mwanda
2020-09-09ath11k: Add peer max mpdu parameter in peer assoc commandTamizh Chelvam
Add peer max mpdu length configuration support in peer_assoc_he parameters. Noticed low throughput for the STA which supports HE, HT and not VHT in MU-MIMO case without this configuration Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1588611900-21185-2-git-send-email-tamizhr@codeaurora.org
2020-09-09ath11k: fix uninitialized return in ath11k_spectral_process_data()Dan Carpenter
There is a success path where "ret" isn't initialized where we never have a ATH11K_SPECTRAL_TAG_SCAN_SEARCH and then ret isn't initialized. Fixes: 9d11b7bff950 ("ath11k: add support for spectral scan") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200619142922.GA267142@mwanda
2020-09-09nvme-fabrics: allow to queue requests for live queuesSagi Grimberg
Right now we are failing requests based on the controller state (which is checked inline in nvmf_check_ready) however we should definitely accept requests if the queue is live. When entering controller reset, we transition the controller into NVME_CTRL_RESETTING, and then return BLK_STS_RESOURCE for non-mpath requests (have blk_noretry_request set). This is also the case for NVME_REQ_USER for the wrong reason. There shouldn't be any reason for us to reject this I/O in a controller reset. We do want to prevent passthru commands on the admin queue because we need the controller to fully initialize first before we let user passthru admin commands to be issued. In a non-mpath setup, this means that the requests will simply be requeued over and over forever not allowing the q_usage_counter to drop its final reference, causing controller reset to hang if running concurrently with heavy I/O. Fixes: 35897b920c8a ("nvme-fabrics: fix and refine state checks in __nvmf_check_ready") Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-09powerpc/papr_scm: Limit the readability of 'perf_stats' sysfs attributeVaibhav Jain
The newly introduced 'perf_stats' attribute uses the default access mode of 0444, allowing non-root users to access performance stats of an nvdimm and potentially force the kernel into issuing a large number of expensive hypercalls. Since the information exposed by this attribute cannot be cached it is better to ward off access to this attribute from users who don't need to access to these performance statistics. Hence update the access mode of 'perf_stats' attribute to be only readable by root users. Fixes: 2d02bf835e57 ("powerpc/papr_scm: Fetch nvdimm performance stats from PHYP") Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200907110540.21349-1-vaibhav@linux.ibm.com
2020-09-08f2fs: Return EOF on unaligned end of file DIO readGabriel Krisman Bertazi
Reading past end of file returns EOF for aligned reads but -EINVAL for unaligned reads on f2fs. While documentation is not strict about this corner case, most filesystem returns EOF on this case, like iomap filesystems. This patch consolidates the behavior for f2fs, by making it return EOF(0). it can be verified by a read loop on a file that does a partial read before EOF (A file that doesn't end at an aligned address). The following code fails on an unaligned file on f2fs, but not on btrfs, ext4, and xfs. while (done < total) { ssize_t delta = pread(fd, buf + done, total - done, off + done); if (!delta) break; ... } It is arguable whether filesystems should actually return EOF or -EINVAL, but since iomap filesystems support it, and so does the original DIO code, it seems reasonable to consolidate on that. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-08f2fs: fix indefinite loop scanning for free nidSahitya Tummala
If the sbi->ckpt->next_free_nid is not NAT block aligned and if there are free nids in that NAT block between the start of the block and next_free_nid, then those free nids will not be scanned in scan_nat_page(). This results into mismatch between nm_i->available_nids and the sum of nm_i->free_nid_count of all NAT blocks scanned. And nm_i->available_nids will always be greater than the sum of free nids in all the blocks. Under this condition, if we use all the currently scanned free nids, then it will loop forever in f2fs_alloc_nid() as nm_i->available_nids is still not zero but nm_i->free_nid_count of that partially scanned NAT block is zero. Fix this to align the nm_i->next_scan_nid to the first nid of the corresponding NAT block. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-08f2fs: Fix type of section block count variablesShin'ichiro Kawasaki
Commit da52f8ade40b ("f2fs: get the right gc victim section when section has several segments") added code to count blocks of each section using variables with type 'unsigned short', which has 2 bytes size in many systems. However, the counts can be larger than the 2 bytes range and type conversion results in wrong values. Especially when the f2fs sections have blocks as many as USHRT_MAX + 1, the count is handled as 0. This triggers eternal loop in init_dirty_segmap() at mount system call. Fix this by changing the type of the variables to block_t. Fixes: da52f8ade40b ("f2fs: get the right gc victim section when section has several segments") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-08net: ethernet/neterion/vxge: fix spelling of "functionality"Randy Dunlap
Fix typo/spello of "functionality". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jon Mason <jdmason@kudzu.us> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08nfc: pn533/usb.c: fix spelling of "functions"Randy Dunlap
Fix typo/spello of "functions". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: linux-nfc@lists.01.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08ipv6: add tos reflection in TCP reset and ackWei Wang
Currently, ipv6 stack does not do any TOS reflection. To make the behavior consistent with v4 stack, this commit adds TOS reflection in tcp_v6_reqsk_send_ack() and tcp_v6_send_reset(). We clear the lower 2-bit ECN value of the received TOS in compliance with RFC 3168 6.1.5 robustness principles. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08ip: fix tos reflection in ack and reset packetsWei Wang
Currently, in tcp_v4_reqsk_send_ack() and tcp_v4_send_reset(), we echo the TOS value of the received packets in the response. However, we do not want to echo the lower 2 ECN bits in accordance with RFC 3168 6.1.5 robustness principles. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08Merge tag 'rxrpc-next-20200908' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Allow more calls to same peer Here are some development patches for AF_RXRPC that allow more simultaneous calls to be made to the same peer with the same security parameters. The current code allows a maximum of 4 simultaneous calls, which limits the afs filesystem to that many simultaneous threads. This increases the limit to 16. To make this work, the way client connections are limited has to be changed (incoming call/connection limits are unaffected) as the current code depends on queuing calls on a connection and then pushing the connection through a queue. The limit is on the number of available connections. This is changed such that there's a limit[*] on the total number of calls systemwide across all namespaces, but the limit on the number of client connections is removed. Once a call is allowed to proceed, it finds a bundle of connections and tries to grab a call slot. If there's a spare call slot, fine, otherwise it will wait. If there's already a waiter, it will try to create another connection in the bundle, unless the limit of 4 is reached (4 calls per connection, giving 16). A number of things throttle someone trying to set up endless connections: - Calls that fail immediately have their conns deleted immediately, - Calls that don't fail immediately have to wait for a timeout, - Connections normally get automatically reaped if they haven't been used for 2m, but this is sped up to 2s if the number of connections rises over 900. This number is tunable by sysctl. [*] Technically two limits - kernel sockets and userspace rxrpc sockets are accounted separately. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08net: tc35815: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'tc35815_init_queues()' GFP_ATOMIC must be used because it can be called from 'tc35815_restart()' where some spinlock are taken. The call chain is: tc35815_restart --> tc35815_clear_queues --> tc35815_init_queues @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08hippi: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'rr_init_one()' GFP_KERNEL can be used because it is a probe function and no spinlock is taken in the between. When memory is allocated in 'rr_open()' GFP_KERNEL can be used because it is a '.ndo_open' function (see struct net_device_ops) and no spinlock is taken in the between. '.ndo_open' functions are synchronized using the rtnl_lock() semaphore. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08sfc: coding style cleanups in mcdi_port_common.cEdward Cree
The code recently moved into this file contained a number of coding style issues, about which checkpatch and xmastree complained. Fix them. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08Merge tag 'ieee802154-for-davem-2020-09-08' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2020-09-08 An update from ieee802154 for your *net* tree. A potential memory leak fix for ca8210 from Liu Jian, a check on the return for a register read in adf7242 and finally a user after free fix in the softmac tx function from Eric found by syzkaller. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08net: bridge: mcast: fix unused br var when lockdep isn't definedNikolay Aleksandrov
Stephen reported the following warning: net/bridge/br_multicast.c: In function 'br_multicast_find_port': net/bridge/br_multicast.c:1818:21: warning: unused variable 'br' [-Wunused-variable] 1818 | struct net_bridge *br = mp->br; | ^~ It happens due to bridge's mlock_dereference() when lockdep isn't defined. Silence the warning by annotating the variable as __maybe_unused. Fixes: 0436862e417e ("net: bridge: mcast: support for IGMPv3/MLDv2 ALLOW_NEW_SOURCES report") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08MAINTAINERS: remove John Allen from ibmvnicJakub Kicinski
John's email has bounced and Thomas confirms he no longer works on ibmvnic. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-22 05:05:17 +0000