summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-25intel-pstate: Use #defines instead of hard-coded values.Konrad Rzeszutek Wilk
They are defined in coreboot (MSR_PLATFORM) and the other one is already defined in msr-index.h. Let's use those. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-25cpufreq / intel_pstate: Fix calculation of current frequencyDirk Brandewie
Use the correct pstate value to calculate the effective frequency. References: https://bugzilla.redhat.com/show_bug.cgi?id=923942 Reported-by: Satish Balay <balay@fastmail.fm> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-25cpufreq / intel_pstate: Add function to check that all MSRs are validDirk Brandewie
Some VMs seem to try to implement some MSRs but not all the registers the driver needs. Check to make sure all the MSR that we need are available. If any of the required MSRs are not available refuse to load. References: https://bugzilla.redhat.com/show_bug.cgi?id=922923 Reported-by: Josh Stone <jistone@redhat.com> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-25Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Exynos and Intel fixes. The intel fixes are fairly straightforward, mostly reverts due to bugs found. The exynos one is a big larger since they found some issues with the G2D engine and iommu interaction, and needed to verify the operations a lot better than they were previously, otherwise a user app can just crash the kernel with an iommu fault." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: Revert "drm/i915: write backlight harder" drm/i915: don't disable the power well yet Revert "drm/i915: set TRANSCODER_EDP even earlier" drm/exynos: Check g2d cmd list for g2d restrictions drm/exynos: Add a new function to get gem buffer size drm/exynos: Deal with g2d buffer info more efficiently drm/exynos: Clean up some G2D codes for readability drm/exynos: Fix G2D core malfunctioning issue drm/exynos: clear node object type at gem unmap drm/exynos: Fix error routine to getting dma addr. drm/exynos: Replaced kzalloc & memcpy with kmemdup drm/exynos: fimd: calculate the correct address offset drm/exynos: Make mixer_check_timing static drm/exynos: modify the compatible string for exynos fimd
2013-03-25xfrm: Fix esn sequence number diff calculation in xfrm_replay_notify_esn()Mathias Krause
Commit 0017c0b "xfrm: Fix replay notification for esn." is off by one for the sequence number wrapped case as UINT_MAX is 0xffffffff, not 0x100000000. ;) Just calculate the diff like done everywhere else in the file. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-03-25powerpc: make additional room in exception vector areaChen Gang
The FWNMI region is fixed at 0x7000 and the vector are now overflowing that with allmodconfig. Fix that by moving slb_miss_realmode code out of that region as it doesn't need to be that close to the call sites (it is a _GLOBAL function) Fixes this build error: arch/powerpc/kernel/exceptions-64s.S: Assembler messages: arch/powerpc/kernel/exceptions-64s.S:1304: Error: attempt to move .org backwards Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2013-03-25Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into HEAD Daniel writes: "Just three revert/disable by default patches, one of them cc: stable (since the offending commit was cc: stable, too)." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: Revert "drm/i915: write backlight harder" drm/i915: don't disable the power well yet Revert "drm/i915: set TRANSCODER_EDP even earlier"
2013-03-25Merge branch 'exynos-drm-fixes' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into HEAD Inki writes: Includes bug fixes and code cleanups. And it considers some restrictions to G2D hardware. With this, the malfunction and page fault issues to g2d driver would be fixed. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: Check g2d cmd list for g2d restrictions drm/exynos: Add a new function to get gem buffer size drm/exynos: Deal with g2d buffer info more efficiently drm/exynos: Clean up some G2D codes for readability drm/exynos: Fix G2D core malfunctioning issue drm/exynos: clear node object type at gem unmap drm/exynos: Fix error routine to getting dma addr. drm/exynos: Replaced kzalloc & memcpy with kmemdup drm/exynos: fimd: calculate the correct address offset drm/exynos: Make mixer_check_timing static drm/exynos: modify the compatible string for exynos fimd
2013-03-24tcp: undo spurious timeout after SACK renegingYuchung Cheng
On SACK reneging the sender immediately retransmits and forces a timeout but disables Eifel (undo). If the (buggy) receiver does not drop any packet this can trigger a false slow-start retransmit storm driven by the ACKs of the original packets. This can be detected with undo and TCP timestamps. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-24bnx2x: fix assignment of signed expression to unsigned variableKumar Amit Mehta
fix for incorrect assignment of signed expression to unsigned variable. Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-24bridge: fix crash when set mac address of br interfaceHong zhi guo
When I tried to set mac address of a bridge interface to a mac address which already learned on this bridge, I got system hang. The cause is straight forward: function br_fdb_change_mac_address calls fdb_insert with NULL source nbp. Then an fdb lookup is performed. If an fdb entry is found and it's local, it's OK. But if it's not local, source is dereferenced for printk without NULL check. Signed-off-by: Hong Zhiguo <honkiko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-248021q: fix a potential use-after-freeCong Wang
vlan_vid_del() could possibly free ->vlan_info after a RCU grace period, however, we may still refer to the freed memory area by 'grp' pointer. Found by code inspection. This patch moves vlan_vid_del() as behind as possible. Cc: Patrick McHardy <kaber@trash.net> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-24net: remove a WARN_ON() in net_enable_timestamp()Eric Dumazet
The WARN_ON(in_interrupt()) in net_enable_timestamp() can get false positive, in socket clone path, run from softirq context : [ 3641.624425] WARNING: at net/core/dev.c:1532 net_enable_timestamp+0x7b/0x80() [ 3641.668811] Call Trace: [ 3641.671254] <IRQ> [<ffffffff80286817>] warn_slowpath_common+0x87/0xc0 [ 3641.677871] [<ffffffff8028686a>] warn_slowpath_null+0x1a/0x20 [ 3641.683683] [<ffffffff80742f8b>] net_enable_timestamp+0x7b/0x80 [ 3641.689668] [<ffffffff80732ce5>] sk_clone_lock+0x425/0x450 [ 3641.695222] [<ffffffff8078db36>] inet_csk_clone_lock+0x16/0x170 [ 3641.701213] [<ffffffff807ae449>] tcp_create_openreq_child+0x29/0x820 [ 3641.707663] [<ffffffff807d62e2>] ? ipt_do_table+0x222/0x670 [ 3641.713354] [<ffffffff807aaf5b>] tcp_v4_syn_recv_sock+0xab/0x3d0 [ 3641.719425] [<ffffffff807af63a>] tcp_check_req+0x3da/0x530 [ 3641.724979] [<ffffffff8078b400>] ? inet_hashinfo_init+0x60/0x80 [ 3641.730964] [<ffffffff807ade6f>] ? tcp_v4_rcv+0x79f/0xbe0 [ 3641.736430] [<ffffffff807ab9bd>] tcp_v4_do_rcv+0x38d/0x4f0 [ 3641.741985] [<ffffffff807ae14a>] tcp_v4_rcv+0xa7a/0xbe0 Its safe at this point because the parent socket owns a reference on the netstamp_needed, so we cant have a 0 -> 1 transition, which requires to lock a mutex. Instead of refining the check, lets remove it, as all known callers are safe. If it ever changes in the future, static_key_slow_inc() will complain anyway. Reported-by: Laurent Chavey <chavey@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-24Merge tag 'pinctrl-fixes-for-v3.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: "Here are a few pinctrl fixes for the v3.9 rc series: - Usecount bounds checking so we do not go below zero on mux usecounts. - Loop range checking in GPIO ranges in the DT range parser. - Proper print in debugfs for pinconf state. - Fix compilation bug in generic pinconf code. - Minor bugfixes to abx500 and mvebu drivers." * tag 'pinctrl-fixes-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinmux: forbid mux_usecount to be set at UINT_MAX pinctrl: mvebu: fix checking for SoC specific controls pinctrl: generic: Fix compilation error pinctrl: Print the correct information in debugfs pinconf-state file pinctrl: abx500: Fix checking if pin use AlternateFunction register gpio: fix wrong checking condition for gpio range
2013-03-24Merge branch 'x86/urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "A collection of minor fixes, more EFI variables paranoia (anti-bricking) plus the ability to disable the pstore either as a runtime default or completely, due to bricking concerns." * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efivars: Fix check for CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE x86, microcode_intel_early: Mark apply_microcode_early() as cpuinit efivars: Handle duplicate names from get_next_variable() efivars: explicitly calculate length of VariableName efivars: Add module parameter to disable use as a pstore backend efivars: Allow disabling use as a pstore backend x86-32, microcode_intel_early: Fix crash with CONFIG_DEBUG_VIRTUAL x86-64: Fix the failure case in copy_user_handle_tail()
2013-03-24Revert "drm/i915: write backlight harder"Daniel Vetter
This reverts commit cf0a6584aa6d382f802f2c3cacac23ccbccde0cd. Turns out that cargo-culting breaks systems. Note that we can't revert further, since commit 770c12312ad617172b1a65b911d3e6564fc5aca8 Author: Takashi Iwai <tiwai@suse.de> Date: Sat Aug 11 08:56:42 2012 +0200 drm/i915: Fix blank panel at reopening lid fixed a regression in 3.6-rc kernels for which we've never figured out the exact root cause. But some further inspection of the backlight code reveals that it's seriously lacking locking. And especially the asle backlight update is know to get fired (through some smm magic) when writing specific backlight control registers. So the possibility of suffering from races is rather real. Until those races are fixed I don't think it makes sense to try further hacks. Which sucks a bit, but sometimes that's how it is :( References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg18788.html Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47941 Tested-by: Takashi Iwai <tiwai@suse.de> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: stable@vger.kernel.org (the reverted commit was cc: stable, too) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-24drm/i915: don't disable the power well yetPaulo Zanoni
We're still not 100% ready to disable the power well, so don't disable it for now. When we disable it we break the audio driver (because some of the audio registers are on the power well) and machines with eDP on port D (because it doesn't use TRANSCODER_EDP). Also, instead of just reverting the code, add a Kernel option to let us disable it if we want. This will allow us to keep developing and testing the feature while it's not enabled. This fixes problems caused by the following commit: commit d6dd9eb1d96d2b7345fe4664066c2b7ed86da898 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jan 29 16:35:20 2013 -0200 drm/i915: dynamic Haswell display power well support References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg18788.html Cc: Takashi Iwai <tiwai@suse.de> Cc: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-24Revert "drm/i915: set TRANSCODER_EDP even earlier"Daniel Vetter
This reverts commit cc464b2a17c59adedbdc02cc54341d630354edc3. The reason is that Takashi Iwai reported a regression bisected to this commit: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg18788.html His machine has eDP on port D (usual desktop all-in-on setup), which intel_dp.c identifies as an eDP panel, but the hsw ddi code mishandles. Closer inspection of the code reveals that haswell_crtc_mode_set also checks intel_encoder_is_pch_edp when setting is_cpu_edp. On haswell that doesn't make much sense (since there's no edp on the pch), but what this function _really_ checks is whether that edp connector is on port A or port D. It's just that on ilk-ivb port D was on the pch ... So that explains why this seemingly innocent change killed eDP on port D. Furthermore it looks like everything else accidentally works, since we've never enabled eDP on port D support for hsw intentionally (e.g. we still register the HDMI output for port D in that case). But in retrospective I also don't like that this leaks highly platform specific details into common code, and the reason is that the drm vblank layer sucks. So instead I think we should: - move the cpu_transcoder into the dynamic pipe_config tracking (once that's merged). - fix up the drm vblank layer to finally deal with kms crtc objects instead of int pipes. v2: Pimp commit message with the better diagnosis as discussed with Paulo on irc. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-24mac80211: Don't restart sta-timer if not associated.Ben Greear
I found another crash when deleting lots of virtual stations in a congested environment. I think the problem is that the ieee80211_mlme_notify_scan_completed could call ieee80211_restart_sta_timer for a stopped interface that was about to be deleted. With the following patch I am unable to reproduce the crash. Signed-off-by: Ben Greear <greearb@candelatech.com> [move check, also make the same change in mesh] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-24cfg80211: always check for scan end on P2P deviceJohannes Berg
If a P2P device wdev is removed while it has a scan, then the scan completion might crash later as it is already freed by that time. To avoid the crash always check the scan completion when the P2P device is being removed for some reason. If the driver already canceled it, don't want and free it, otherwise warn and leak it to avoid later crashes. In order to do this, locking needs to be changed away from the rdev mutex (which can't always be guaranteed). For now, use the sched_scan_mtx instead, I'll rename it to just scan_mtx in a later patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-23Merge tag 'efi-for-3.9-rc4' into x86/urgentH. Peter Anvin
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-03-23Linux 3.9-rc4v3.9-rc4Linus Torvalds
2013-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "These are mostly minor fixes this time around. The iscsi-target CHAP big-endian bugfix and bump FD_MAX_SECTORS=2048 default patch to allow 1MB sized I/Os for FILEIO backends on >= v3.5 code are both CC'ed to stable. Also, there is a persistent reservations regression that has recently been reported for >= v3.8.x code, that is currently being tracked down for v3.9." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target/pscsi: Reject cross page boundary case in pscsi_map_sg target/file: Bump FD_MAX_SECTORS to 2048 to handle 1M sized I/Os tcm_vhost: Flush vhost_work in vhost_scsi_flush() tcm_vhost: Add missed lock in vhost_scsi_clear_endpoint() target: fix possible memory leak in core_tpg_register() target/iscsi: Fix mutual CHAP auth on big-endian arches target_core_sbc: use noop for SYNCHRONIZE_CACHE
2013-03-23Merge tag 'md-3.9-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull md fixes from NeilBrown: "A few bugfixes for md - recent regressions in raid5 - recent regressions in dmraid - a few instances of CONFIG_MULTICORE_RAID456 linger Several tagged for -stable" * tag 'md-3.9-fixes' of git://neil.brown.name/md: md: remove CONFIG_MULTICORE_RAID456 entirely md/raid5: ensure sync and DISCARD don't happen at the same time. MD: Prevent sysfs operations on uninitialized kobjects MD RAID5: Avoid accessing gendisk or queue structs when not available md/raid5: schedule_construction should abort if nothing to do.
2013-03-23Merge tag 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Pull libata updates from Jeff Garzik: "Simple stuff. See one-line summaries." * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_samsung_cf: use module_platform_driver_probe() [libata] Avoid specialized TLA's in ZPODD's Kconfig libata-acpi.c: fix copy and paste mistake in ata_acpi_register_power_resource sata_fsl: Remove redundant NULL check before kfree ahci: Add Device IDs for Intel Wellsburg PCH ata_piix: Add MODULE_PARM_DESC to prefer_ms_hyperv
2013-03-23Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "One bugfix for the tegra driver. Two updates regarding email addresses and MAINTAINERS which I like to have up-to-date so people can be reached immediately. While we are here, there is on PCI_ID addition." * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: add maintainer entry for atmel i2c driver i2c: Fix my e-mail address in drivers and documentation i2c: iSMT: add Intel Avoton DeviceIDs i2c: tegra: check the clk_prepare_enable() return value
2013-03-23Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog fixes from Wim Van Sebroeck: "Fix a boot issues and correct the AcpiMmioSel bitmask in the sp5100_tco watchdog device driver" * git://www.linux-watchdog.org/linux-watchdog: watchdog: sp5100_tco: Set the AcpiMmioSel bitmask value to 1 instead of 2 watchdog: sp5100_tco: Remove code that may cause a boot failure
2013-03-23KMS: fix EDID detailed timing frame rateTorsten Duwe
When KMS has parsed an EDID "detailed timing", it leaves the frame rate zeroed. Consecutive (debug-) output of that mode thus yields 0 for vsync. This simple fix also speeds up future invocations of drm_mode_vrefresh(). While it is debatable whether this qualifies as a -stable fix I'd apply it for consistency's sake; drm_helper_probe_single_connector_modes() does the same thing already for all probed modes. Cc: stable@vger.kernel.org Signed-off-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23KMS: fix EDID detailed timing vsync parsingTorsten Duwe
EDID spreads some values across multiple bytes; bit-fiddling is needed to retrieve these. The current code to parse "detailed timings" has a cut&paste error that results in a vsync offset of at most 15 lines instead of 63. See http://en.wikipedia.org/wiki/EDID and in the "EDID Detailed Timing Descriptor" see bytes 10+11 show why that needs to be a left shift. Cc: stable@vger.kernel.org Signed-off-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23drm/i915: there's no PIPESTAT on HAS_PCH_SPLIT platformsPaulo Zanoni
So don't read it when capturing the error state. This solves "unclaimed register" messages on Haswell when we have a GPU hang. V2: Check for HAS_PCH_SPLIT instead of Gen5+ because VLV still has this register. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23drm/i915: there's no DSPPOS register on gen4+Paulo Zanoni
So don't read it when capturing the error state. This solves some "unclaimed register" messages on Haswell when we hang the GPU. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23drm/i915: fix DSPADDR Gen checkPaulo Zanoni
The first version of commit "drm/i915: there's no DSPADDR register on Haswell" added 2 "!IS_HASWELL" checks. When reviewing the patch, Ben suggested to make these checks more future-proof, so when Daniel applied the patch he fixed the first check but not the second. This commit makes the second check also "future-proof". Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23drm/i915: Use BUG() in a case of a programming errorDamien Lespiau
The port number should always be correctly set. Do the same thing as the switch above and use BUG() to signal that branch is not supposed to be taken. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23drm/i915: Rename intel_ddi_enable_pipe_func() to transcoder_func()Damien Lespiau
We are really talking about the transcoder function here and the disable version uses trancoder in its name already, so let's try to be consistent. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23drm/i915: Cleanup if the EDP transcoder has a bobug input valueDamien Lespiau
In the case where the hardware has been wrongly programmed and the EDP TRANS_DDI_FUNC_CTL register has a bogus value in its EDP Input field, we were using the pipe variable uninitialized. In this case, shutdown the transcoder. It will be programmed correctly the next time we try to enabled eDP. Note from Paulo's review: Wrong modeset sequence can easily lead to frozen machines hence the disable_ddi call might be risky. But since things are awry already, doesn't matter too much. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Add note about Paulo's caution about potential hangs.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23drm/i915: Error out if we are trying to use VGA with SPLL already in useDamien Lespiau
Our static analysis tool noticed that 'reg' could be used uninitialized if we are trying to get a PLL to drive VGA and SPLL is already in use (plls->spll_refcoung != 0). In the (error) case above, let's return false to the caller and emit an error. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23drm/i915: Implement WaSwitchSolVfFArbitrationPriorityBen Widawsky
Bspec mentions this for HSW+. I can't quite tell what the effects are, and I don't easily have a way to test this. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23drm/i915: Set the VIC in AVI infoframe for SDVOVille Syrjälä
We do this for HDMI already, so I don't know why we wouldn't do it for SDVO as well. This is completely untested due to lack of hardware. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23drm/i915: Kill a strange comment about DPMS functionsVille Syrjälä
This comment looks like some historical leftover. Get rid of it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23drm/i915: Correct sandybrige overclockingBen Widawsky
Change the gen6+ max delay if the pcode read was successful (not the inverse). The previous code was all sorts of wrong and has existed since I broke it: commit 42c0526c930523425ff6edc95b7235ce7ab9308d Author: Ben Widawsky <ben@bwidawsk.net> Date: Wed Sep 26 10:34:00 2012 -0700 drm/i915: Extract PCU communication I added some parentheses for clarity, and I also corrected the debug message message to use the mask (wrong before I came along) and added a print to show the value we're changing from. Looking over the code, I'm not actually sure what we're trying to do. I introduced the bug simply by extracting the function not implementing anything new. We already set max_delay based on the capabilities register (which is what we use elsewhere to determine min and max). This would potentially increase it, I suppose? Jesse, I can't find the document which explains the definitions of the pcode commands, maybe you have it around. Based on Jesse's response, this could potentially be for -fixes, or stable, or maybe lead to us dropping it entirely. As the current code is is, things won't completely break because of the aforementioned capabilities register, and in my experimentation, enabling this has no effect, it goes from 1100->1100. I found this while reviewing Jesse's VLV patches. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Bikeshed-away the redudant parens spotted by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23drm/i915: Introduce GEN7_FEATURES for device infoBen Widawsky
Recommended by Chris. v2: Make it GEN7_FEATURES, and use it for vlv and hsw also (Ben) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23drm/i915: Move num_pipes to intel infoBen Widawsky
Requested by Daniel. v2: Fix incorrect num_pipe settings. (Chris) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23drm/i915: fixup pd vs pt confusion in gen6 ppgtt codeDaniel Vetter
The index variable points at a page table, not a page directory or a pde. Ben Widawsky fix this up correctly in his ppgtt cleanup, but I've botched the job and copy&pasted the old confusion from the original gen6 ppgtt code in commit def886c3768d24c4e0aa56ff98b5a468c2b5c9bf Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 24 14:44:56 2013 -0800 drm/i915: vfuncs for ppgtt Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23style nit: Align function parameter continuation properly.Daniel Vetter
2013-03-23drm/i915: VLV doesn't have HDMI on port CJesse Barnes
Port C is for eDP. Port B is shared between HDMI and DP. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23drm/i915: DSPFW and BLC regs are in the display offset rangeJesse Barnes
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23drm/i915: set conservative clock gating values on VLV v2Jesse Barnes
We'll re-enable select bits as needed after testing and power measurement. v2: split out wake handling bits (Jani) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23drm/i915: fix WaDisablePSDDualDispatchEnable on VLV v2Jesse Barnes
Can prevent a hang when we get to tessellation. We need to set bit 15 as well for this workaround. v2: update changelog with accurate info Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23drm/i915: add more VLV IDsJesse Barnes
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23drm/i915: use VLV DIP routines on VLV v2Jesse Barnes
This fixes up broken logic introduced in commit 90b107c8f7ea75ef55db4e0515dda86b245f8978 Author: Shobhit Kumar <shobhit.kumar@intel.com> Date: Wed Mar 28 13:39:32 2012 -0700 drm/i915: Enable HDMI on ValleyView That one was probably a rebase fail along the way. v2: clean up init ordering (Daniel) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Pimp commit message a bit.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit (git 2.34.1) at 2025-09-13 18:42:22 +0000