summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-05net: qrtr: Reset the node and port ID of broadcast messagesArun Kumar Neelakantam
All the control messages broadcast to remote routers are using QRTR_NODE_BCAST instead of using local router NODE ID which cause the packets to be dropped on remote router due to invalid NODE ID. Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: qrtr: Broadcast messages only from control portArun Kumar Neelakantam
The broadcast node id should only be sent with the control port id. Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05ipv6: make ipv6_renew_options() interrupt/kernel safePaul Moore
At present the ipv6_renew_options_kern() function ends up calling into access_ok() which is problematic if done from inside an interrupt as access_ok() calls WARN_ON_IN_IRQ() on some (all?) architectures (x86-64 is affected). Example warning/backtrace is shown below: WARNING: CPU: 1 PID: 3144 at lib/usercopy.c:11 _copy_from_user+0x85/0x90 ... Call Trace: <IRQ> ipv6_renew_option+0xb2/0xf0 ipv6_renew_options+0x26a/0x340 ipv6_renew_options_kern+0x2c/0x40 calipso_req_setattr+0x72/0xe0 netlbl_req_setattr+0x126/0x1b0 selinux_netlbl_inet_conn_request+0x80/0x100 selinux_inet_conn_request+0x6d/0xb0 security_inet_conn_request+0x32/0x50 tcp_conn_request+0x35f/0xe00 ? __lock_acquire+0x250/0x16c0 ? selinux_socket_sock_rcv_skb+0x1ae/0x210 ? tcp_rcv_state_process+0x289/0x106b tcp_rcv_state_process+0x289/0x106b ? tcp_v6_do_rcv+0x1a7/0x3c0 tcp_v6_do_rcv+0x1a7/0x3c0 tcp_v6_rcv+0xc82/0xcf0 ip6_input_finish+0x10d/0x690 ip6_input+0x45/0x1e0 ? ip6_rcv_finish+0x1d0/0x1d0 ipv6_rcv+0x32b/0x880 ? ip6_make_skb+0x1e0/0x1e0 __netif_receive_skb_core+0x6f2/0xdf0 ? process_backlog+0x85/0x250 ? process_backlog+0x85/0x250 ? process_backlog+0xec/0x250 process_backlog+0xec/0x250 net_rx_action+0x153/0x480 __do_softirq+0xd9/0x4f7 do_softirq_own_stack+0x2a/0x40 </IRQ> ... While not present in the backtrace, ipv6_renew_option() ends up calling access_ok() via the following chain: access_ok() _copy_from_user() copy_from_user() ipv6_renew_option() The fix presented in this patch is to perform the userspace copy earlier in the call chain such that it is only called when the option data is actually coming from userspace; that place is do_ipv6_setsockopt(). Not only does this solve the problem seen in the backtrace above, it also allows us to simplify the code quite a bit by removing ipv6_renew_options_kern() completely. We also take this opportunity to cleanup ipv6_renew_options()/ipv6_renew_option() a small amount as well. This patch is heavily based on a rough patch by Al Viro. I've taken his original patch, converted a kmemdup() call in do_ipv6_setsockopt() to a memdup_user() call, made better use of the e_inval jump target in the same function, and cleaned up the use ipv6_renew_option() by ipv6_renew_options(). CC: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05qed: off by one in qed_parse_mcp_trace_buf()Dan Carpenter
If format_idx == s_mcp_trace_meta.formats_num then we read one element beyond the end of the s_mcp_trace_meta.formats[] array. Fixes: 50bc60cb155c ("qed*: Utilize FW 8.33.11.0") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05Merge branches 'acpi-tables' and 'acpica'Rafael J. Wysocki
Merge ACPICA regression fix and a fix for the recently added PPTT support. * acpi-tables: ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set * acpica: ACPICA: Drop leading newlines from error messages
2018-07-05Merge branch 'pm-pci'Rafael J. Wysocki
Merge a PCI power management regression fix. * pm-pci: PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM
2018-07-05netfilter: x_tables: set module owner for icmp(6) matchesFlorian Westphal
nft_compat relies on xt_request_find_match to increment refcount of the module that provides the match/target. The (builtin) icmp matches did't set the module owner so it was possible to rmmod ip(6)tables while icmp extensions were still in use. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-05ieee802154: 6lowpan: set IFLA_LINKLubomir Rintel
Otherwise NetworkManager (and iproute alike) is not able to identify the parent IEEE 802.15.4 interface of a 6LoWPAN link. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-07-05ieee802154: mcr20a: add missing includesArnd Bergmann
Without CONFIG_GPIOLIB, some headers are not included implicitly, leading to a build failure: drivers/net/ieee802154/mcr20a.c: In function 'mcr20a_probe': drivers/net/ieee802154/mcr20a.c:1347:13: error: implicit declaration of function 'irq_get_trigger_type'; did you mean 'irq_get_irqchip_state'? [-Werror=implicit-function-declaration] This includes gpio/consumer.h and irq.h directly rather through the gpiolib header. Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Xue Liu <liuxuenetmail@gmail.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-07-05nds32: fix build error "relocation truncated to fit: R_NDS32_25_PCREL_RELA" whenGreentime Hu
make allyesconfig It will cause a linking error because the jump assembly code were using j, however it may be not enough to jump to the destination. We have to change it with pseudo instruction b. In that way, assembler will generate a set of safe assembly codes to make sure the destination is able to jump. Toolchain: https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/x86_64-gcc-8.1.0-nolibc-nds32le-linux.tar.gz Command: PATH=/NOBACKUP/atcsqa06/greentime/os/toolchain-kernel.org/gcc-8.1.0-nolibc/nds32le-linux/bin:$PATH ARCH=nds32 CROSS_COMPILE=nds32le-linux- make allyesconfig PATH=/NOBACKUP/atcsqa06/greentime/os/toolchain-kernel.org/gcc-8.1.0-nolibc/nds32le-linux/bin:$PATH ARCH=nds32 CROSS_COMPILE=nds32le-linux- make -j8 MODPOST vmlinux.o WARNING: EXPORT symbol "copy_page" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "clear_page" [vmlinux] version generation failed, symbol will not be versioned. nds32le-linux-ld: kernel/futex.o:(.fixup+0x4): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xaa): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xb0): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xb6): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xbc): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xc4): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' Makefile:1010: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-07-05samples/bpf: add .gitignore fileTaeung Song
For untracked executables of samples/bpf, add this. Untracked files: (use "git add <file>..." to include in what will be committed) samples/bpf/cpustat samples/bpf/fds_example samples/bpf/lathist samples/bpf/load_sock_ops ... Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05samples/bpf: Check the error of write() and read()Taeung Song
test_task_rename() and test_urandom_read() can be failed during write() and read(), So check the result of them. Reviewed-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05samples/bpf: Check the result of system()Taeung Song
To avoid the below build warning message, use new generate_load() checking the return value. ignoring return value of ‘system’, declared with attribute warn_unused_result And it also refactors the duplicate code of both test_perf_event_all_cpu() and test_perf_event_task() Cc: Teng Qin <qinteng@fb.com> Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05samples/bpf: add missing <linux/if_vlan.h>Taeung Song
This fixes build error regarding redefinition: CLANG-bpf samples/bpf/parse_varlen.o samples/bpf/parse_varlen.c:111:8: error: redefinition of 'vlan_hdr' struct vlan_hdr { ^ ./include/linux/if_vlan.h:38:8: note: previous definition is here So remove duplicate 'struct vlan_hdr' in sample code and include if_vlan.h Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05drm/i915/gvt: update vreg on inhibit context lri commandHang Yuan
Commit cd7e 61b9"init mmio by lri command in vgpu inhibit context" initializes registers saved/restored in context with its vreg value through lri command in ring buffer. It relies on vreg got updated on every guest access. There is a case found that Linux guest uses lri command in inhibit-ctx to update the register. This patch adds vreg update on this case. v2: move mmio_attribute functions to gvt.h (Zhenyu) v3: use mask_mmio_write in vreg update v4: refine codes and add more comments (Zhenyu) Fixes: cd7e61b9("drm/i915/gvt: init mmio by lri command in vgpu inhibit context") Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com> Signed-off-by: Weinan Li <weinan.z.li@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-07-05drm/udl: fix display corruption of the last lineMikulas Patocka
The displaylink hardware has such a peculiarity that it doesn't render a command until next command is received. This produces occasional corruption, such as when setting 22x11 font on the console, only the first line of the cursor will be blinking if the cursor is located at some specific columns. When we end up with a repeating pixel, the driver has a bug that it leaves one uninitialized byte after the command (and this byte is enough to flush the command and render it - thus it fixes the screen corruption), however whe we end up with a non-repeating pixel, there is no byte appended and this results in temporary screen corruption. This patch fixes the screen corruption by always appending a byte 0xAF at the end of URB. It also removes the uninitialized byte. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-07-05usb: chipidea: Always build ULPI codeFabio Estevam
Commit 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51") causes a kernel hang on imx51 systems that use the ULPI interface and do not select the CONFIG_USB_CHIPIDEA_ULPI option. In order to avoid such potential misuse, let's always build the chipidea ULPI code into the final ci_hdrc object. Tested on a imx51-babbage board. Fixes: 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51") Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2018-07-05qed: Fix reading stale configuration informationDenis Bolotin
Configuration information read at driver load can become stale after it is updated. Mark information as not valid and re-populate when this happens. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: phy: fix flag masking in __set_phy_supportedHeiner Kallweit
Currently also the pause flags are removed from phydev->supported because they're not included in PHY_DEFAULT_FEATURES. I don't think this is intended, especially when considering that this function can be called via phy_set_max_speed() anywhere in a driver. Change the masking to mask out only the values we're going to change. In addition remove the misleading comment, job of this small function is just to adjust the supported and advertised speeds. Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04arm64: add endianness option to LDFLAGS instead of LDMasahiro Yamada
With the recent syntax extension, Kconfig is now able to evaluate the compiler / toolchain capability. However, accumulating flags to 'LD' is not compatible with the way it works; 'LD' must be passed to Kconfig to call $(ld-option,...) from Kconfig files. If you tweak 'LD' in arch Makefile depending on CONFIG_CPU_BIG_ENDIAN, this would end up with circular dependency between Makefile and Kconfig. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-07-04RISC-V: Fix the rv32i kernel buildPalmer Dabbelt
These patches for building 32-bit RISC-V kernel. - Fix the compile errors and warnings on RV32I. - Fix some incompatible problem on RV32I. - Add format.h for compatible of print format. The fixed width integer types format for Elf_Addr will move to generic header by another patch. For now, there are some warning about unexpected argument of type on RV32I. Change in v1: - Fix some error in v1 - Remove implementation of fixed width integer types format for Elf_Addr.
2018-07-04RISC-V: Fix PTRACE_SETREGSET bug.Jim Wilson
In riscv_gpr_set, pass regs instead of &regs to user_regset_copyin to fix gdb segfault. Signed-off-by: Jim Wilson <jimw@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: Don't include irq-riscv-intc.hPalmer Dabbelt
This file has never existed in the upstream kernel, but it's guarded by an #ifdef that's also never existed in the upstream kernel. As a part of our interrupt controller refactoring this header is no longer necessary, but this reference managed to sneak in anyway. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04riscv: remove unnecessary of_platform_populate callRob Herring
The DT core will call of_platform_default_populate, so it is not necessary for arch specific code to call it unless there are custom match entries, auxdata or parent device. Neither of those apply here, so remove the call. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: linux-riscv@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: fix R_RISCV_ADD32/R_RISCV_SUB32 relocationsAndreas Schwab
The R_RISCV_ADD32/R_RISCV_SUB32 relocations should add/subtract the address of the symbol (without overflow check), not its contents. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: Change variable type for 32-bit compatibleZong Li
Signed-off-by: Zong Li <zong@andestech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: Add definiion of extract symbol's index and type for 32-bitZong Li
Use generic marco to get the index and type of symbol. Signed-off-by: Zong Li <zong@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: Select GENERIC_UCMPDI2 on RV32IZong Li
On 32-bit, it need to use __ucmpdi2, otherwise, it can't find the __ucmpdi2 symbol. Signed-off-by: Zong Li <zong@andestech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: Add conditional macro for zone of DMA32Zong Li
The DMA32 is for 64-bit usage. Signed-off-by: Zong Li <zong@andestech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04x86/mm: Add TLB purge to free pmd/pte page interfacesToshi Kani
ioremap() calls pud_free_pmd_page() / pmd_free_pte_page() when it creates a pud / pmd map. The following preconditions are met at their entry. - All pte entries for a target pud/pmd address range have been cleared. - System-wide TLB purges have been peformed for a target pud/pmd address range. The preconditions assure that there is no stale TLB entry for the range. Speculation may not cache TLB entries since it requires all levels of page entries, including ptes, to have P & A-bits set for an associated address. However, speculation may cache pud/pmd entries (paging-structure caches) when they have P-bit set. Add a system-wide TLB purge (INVLPG) to a single page after clearing pud/pmd entry's P-bit. SDM 4.10.4.1, Operation that Invalidate TLBs and Paging-Structure Caches, states that: INVLPG invalidates all paging-structure caches associated with the current PCID regardless of the liner addresses to which they correspond. Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: cpandya@codeaurora.org Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-4-toshi.kani@hpe.com
2018-07-04ioremap: Update pgtable free interfaces with addrChintan Pandya
The following kernel panic was observed on ARM64 platform due to a stale TLB entry. 1. ioremap with 4K size, a valid pte page table is set. 2. iounmap it, its pte entry is set to 0. 3. ioremap the same address with 2M size, update its pmd entry with a new value. 4. CPU may hit an exception because the old pmd entry is still in TLB, which leads to a kernel panic. Commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table") has addressed this panic by falling to pte mappings in the above case on ARM64. To support pmd mappings in all cases, TLB purge needs to be performed in this case on ARM64. Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page() so that TLB purge can be added later in seprate patches. [toshi.kani@hpe.com: merge changes, rewrite patch description] Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Chintan Pandya <cpandya@codeaurora.org> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-3-toshi.kani@hpe.com
2018-07-04x86/mm: Disable ioremap free page handling on x86-PAEToshi Kani
ioremap() supports pmd mappings on x86-PAE. However, kernel's pmd tables are not shared among processes on x86-PAE. Therefore, any update to sync'd pmd entries need re-syncing. Freeing a pte page also leads to a vmalloc fault and hits the BUG_ON in vmalloc_sync_one(). Disable free page handling on x86-PAE. pud_free_pmd_page() and pmd_free_pte_page() simply return 0 if a given pud/pmd entry is present. This assures that ioremap() does not update sync'd pmd entries at the cost of falling back to pte mappings. Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Reported-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: cpandya@codeaurora.org Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-2-toshi.kani@hpe.com
2018-07-04sample/vfio-mdev: Change return type to vm_fault_tSouptick Joarder
convert mbochs_region_vm_fault and mbochs_dmabuf_vm_fault to return vm_fault_t type. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-07-04arm64: Use aarch64elf and aarch64elfb emulation mode variantsPaul Kocialkowski
The aarch64linux and aarch64linuxb emulation modes are not supported by bare-metal toolchains and Linux using them forbids building the kernel with these toolchains. Since there is apparently no reason to target these emulation modes, the more generic elf modes are used instead, allowing to build on bare-metal toolchains as well as the already-supported ones. Fixes: 3d6a7b99e3fa ("arm64: ensure the kernel is compiled for LP64") Cc: stable@vger.kernel.org Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-07-04MAINTAINERS: Add file patterns for serio device tree bindingsGeert Uytterhoeven
Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-04Input: elan_i2c - add ACPI ID for lenovo ideapad 330Donald Shanty III
This allows Elan driver to bind to the touchpad found in Lenovo Ideapad 330 series laptops. Signed-off-by: Donald Shanty III <dshanty@protonmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-04drm/bridge/sii8620: Fix link mode selectionMaciej Purski
Current link mode values do not allow to enable packed pixel modes. Select packed pixel clock mode, if needed, every time the link mode register gets updated. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-4-git-send-email-m.purski@samsung.com
2018-07-04drm/bridge/sii8620: Fix display of packed pixel modesMaciej Purski
Current implementation does not guarantee packed pixel modes working with every dongle. There are some dongles, which require selecting the output mode explicitly. Write proper values to registers in packed_pixel mode, based on how it is done in vendor's code. Select output color space: RGB (no packed pixel) or YCBCR422 (packed pixel). This reverts commit e8b92efa629dac0e70ea4145c5e70616de5f89c8 ("drm/bridge/sii8620: fix display of packed pixel modes in MHL2"). Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-3-git-send-email-m.purski@samsung.com
2018-07-04drm/bridge/sii8620: Send AVI infoframe in all MHL versionsMaciej Purski
Currently AVI infoframe is sent only in MHL3. However, some MHL2 dongles need AVI infoframe to work correctly in either packed pixel mode or non-packed pixel mode. Send AVI infoframe in set_infoframes() in every case. Create an infoframe using drm_hdmi_infoframe_from_display_mode() instead of manually filling each infoframe structure's field. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-2-git-send-email-m.purski@samsung.com
2018-07-04USB: serial: cp210x: add another USB ID for Qivicon ZigBee stickOlli Salonen
There are two versions of the Qivicon Zigbee stick in circulation. This adds the second USB ID to the cp210x driver. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-07-04USB: serial: ch341: fix type promotion bug in ch341_control_in()Dan Carpenter
The "r" variable is an int and "bufsize" is an unsigned int so the comparison is type promoted to unsigned. If usb_control_msg() returns a negative that is treated as a high positive value and the error handling doesn't work. Fixes: 2d5a9c72d0c4 ("USB: serial: ch341: fix control-message error handling") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-07-04smsc75xx: Add workaround for gigabit link up hardware errata.Yuiko Oshino
In certain conditions, the device may not be able to link in gigabit mode. This software workaround ensures that the device will not enter the failure state. Fixes: d0cad871703b898a442e4049c532ec39168e5b57 ("SMSC75XX USB 2.0 Gigabit Ethernet Devices") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04sctp: fix the issue that pathmtu may be set lower than MINSEGMENTXin Long
After commit b6c5734db070 ("sctp: fix the handling of ICMP Frag Needed for too small MTUs"), sctp_transport_update_pmtu would refetch pathmtu from the dst and set it to transport's pathmtu without any check. The new pathmtu may be lower than MINSEGMENT if the dst is obsolete and updated by .get_dst() in sctp_transport_update_pmtu. In this case, it could have a smaller MTU as well, and thus we should validate it against MINSEGMENT instead. Syzbot reported a warning in sctp_mtu_payload caused by this. This patch refetches the pathmtu by calling sctp_dst_mtu where it does the check against MINSEGMENT. v1->v2: - refetch the pathmtu by calling sctp_dst_mtu instead as Marcelo's suggestion. Fixes: b6c5734db070 ("sctp: fix the handling of ICMP Frag Needed for too small MTUs") Reported-by: syzbot+f0d9d7cba052f9344b03@syzkaller.appspotmail.com Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04ACPI / battery: Safe unregistering of hooksJouke Witteveen
A hooking API was implemented for 4.17 in fa93854f7a7ed63d followed by hooks for Thinkpad laptops in 2801b9683f740012. The Thinkpad drivers did not support the Thinkpad 13 and the hooking API crashes on unsupported batteries by altering a list of hooks during unsafe iteration. Thus, Thinkpad 13 laptops could no longer boot. Additionally, a lock was kept in place and debugging information was printed out of order. Fixes: fa93854f7a7e (battery: Add the battery hooking API) Cc: 4.17+ <stable@vger.kernel.org> # 4.17+ Signed-off-by: Jouke Witteveen <j.witteveen@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-04drm/amdgpu: fix user fence write race conditionNicolai Hähnle
The buffer object backing the user fence is reserved using the non-user fence, i.e., as soon as the non-user fence is signaled, the user fence buffer object can be moved or even destroyed. Therefore, emit the user fence first. Both fences have the same cache invalidation behavior, so this should have no user-visible effect. Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-07-04RAID/s390: Remove VLA usageKees Cook
In the quest to remove all stack VLA usage from the kernel[1], this moves the "$#" replacement from being an argument to being inside the function, which avoids generating VLAs. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-04s390/dasd: fix cast-function-type warningsSebastian Ott
Change the tasklets parameter type to fix W=1 warnings when building with gcc 8 like below: drivers/s390/block/dasd.c: In function 'dasd_alloc_device': drivers/s390/block/dasd.c:129:8: warning: cast between incompatible function types from 'void (*)(struct dasd_device *)' to 'void (*)(long unsigned int)' [-Wcast-function-type] (void (*)(unsigned long)) dasd_device_tasklet, ^ Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Acked-by: Jan Höppner <hoeppner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-04s390/pci: add fmt3 fmbSebastian Ott
Add support for format 3 function measurement blocks. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-04s390: wire up rseq system callHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-04s390: wire up io_pgetevents system callHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit (git 2.34.1) at 2025-09-24 16:51:37 +0000