Age | Commit message (Collapse) | Author |
|
The driver can match either via OF or I2C ID tables. If OF is disabled,
the table will be unused:
drivers/nfc/s3fwrn5/i2c.c:265:34: warning:
‘of_s3fwrn5_i2c_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-8-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver can match either via OF or I2C ID tables. If OF is disabled,
the table will be unused:
drivers/nfc/pn533/i2c.c:252:34: warning:
‘of_pn533_i2c_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-7-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The nci_ctrl_hdr.plen field us u8, so checkign if it is bigger than
NCI_MAX_PAYLOAD_SIZE does not make any sense. Fix warning reported by
Smatch:
drivers/nfc/nfcmrvl/i2c.c:52 nfcmrvl_i2c_read() warn:
impossible condition '(nci_hdr.plen > 255) => (0-255 > 255)'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-6-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver can match either via OF or I2C ID tables. If OF is disabled,
the table will be unused:
drivers/nfc/nfcmrvl/spi.c:199:34: warning:
‘of_nfcmrvl_spi_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-5-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might be not relevant here). This
fixes compile warning (!CONFIG_OF):
drivers/nfc/pn533/i2c.c:252:34: warning:
‘of_pn533_i2c_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-4-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The port100_in_rf_setting structure does not contain valid kerneldoc
docummentation, unlike the port100_tg_rf_setting structure. Correct the
kerneldoc to fix W=1 warnings:
warning: This comment starts with '/**', but isn't a kernel-doc comment.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-3-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver can match only via the ACPI ID table so the table should be
always used and the ACPI_PTR does not have any sense. This fixes fixes
compile warning (!CONFIG_ACPI):
drivers/nfc/fdp/i2c.c:362:36: warning:
‘fdp_nci_i2c_acpi_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since structure comments are not kerneldoc, remove the double ** to fix
W=1 warnings:
warning: This comment starts with '/**', but isn't a kernel-doc comment.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce k parameter in pktgen samples in order to toggle UDP tx
checksum
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/cf16417902062c6ea2fd3c79e00510e36a40c31a.1622210713.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Peng Li says:
====================
net: hdlc_fr: clean up some code style issues
V1 -> V2:
1, Use appropriate commit prefix suggested by Jakub Kicinski,
replace commit prefix "net: wan" by "net: hdlc_fr".
====================
Link: https://lore.kernel.org/r/1622160769-6678-1-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch removes unnecessary out of memory message,
to fix the following checkpatch.pl warning:
"WARNING: Possible unnecessary 'out of memory' message"
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch removes redundant braces {}, to fix the
checkpatch.pl warning:
"braces {} are not necessary for any arm of this statement"
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Braces {} should be used on all arms of this statement.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the chackpatch.pl, space prohibited after that '!'.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Code indent should use tabs where possible.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Should not use assignment in if condition.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add spaces required after that close brace '}'.
Add spaces required before the open parenthesis '('.
Add spaces required after that ','.
Add spaces required around that '='.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the checkpatch error as "foo* bar" and should be "foo *bar",
and "(foo*)" should be "(foo *)".
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch fixes the checkpatch error about missing a blank line
after declarations.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch removes some redundant blank lines.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mat Martineau says:
====================
mptcp: Miscellaneous cleanup
Here are some cleanup patches we've collected in the MPTCP tree.
Patches 1-4 do some general tidying.
Patch 5 adds an explicit check at netlink command parsing time to
require a port number when the 'signal' flag is set, to catch the error
earlier.
Patches 6 & 7 fix up the MPTCP 'enabled' sysctl, enforcing it as a
boolean value, and ensuring that the !CONFIG_SYSCTL build still works
after the boolean change.
====================
Link: https://lore.kernel.org/r/20210527235430.183465-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To avoid confusions, it seems better to parse this sysctl parameter as a
boolean. We use it as a boolean, no need to parse an integer and bring
confusions if we see a value different from 0 and 1, especially with
this parameter name: enabled.
It seems fine to do this modification because the default value is 1
(enabled). Then the only other interesting value to set is 0 (disabled).
All other values would not have changed the default behaviour.
Suggested-by: Florian Westphal <fw@strlen.de>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the introduction of the sysctl support in MPTCP with
commit 784325e9f037 ("mptcp: new sysctl to control the activation per NS"),
we don't check CONFIG_SYSCTL.
Until now, that was not an issue: the register and unregister functions
were replaced by NO-OP one if SYSCTL was not enabled in the config. The
only thing we could have avoid is not to reserve memory for the table
but that's for the moment only a small table per net-ns.
But the following commit is going to use SYSCTL_ZERO and SYSCTL_ONE
which are not be defined if SYSCTL is not enabled in the config. This
causes 'undefined reference' errors from the linker.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When add address with port, it is mean to create a listening socket,
and send an ADD_ADDR to remote, so it must have flag signal set,
add this check in mptcp_pm_parse_addr().
Fixes: a77e9179c7651 ("mptcp: deal with MPTCP_PM_ADDR_ATTR_PORT in PM netlink")
Acked-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Memory of struct pm_nl_pernet{} is allocated by kzalloc()
in setup_net()->ops_init(), so it's no need to reset counters
and zero bitmap in pm_nl_init_net().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For outgoing subflow join, when recv SYNACK, in subflow_finish_connect(),
the mptcp_finish_join() may return false in some cases, and send a RESET
to remote, and no local hmac is required.
So generate subflow hmac after mptcp_finish_join().
Fixes: ec3edaa7ca6c ("mptcp: Add handling of outgoing MP_JOIN requests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have macro TOKEN_MAX_RETRIES for the number of token generate retries,
so using TOKEN_MAX_RETRIES in subflow_check_req().
And rename TOKEN_MAX_RETRIES to MPTCP_TOKEN_MAX_RETRIES as it is now
exposed.
Fixes: 535fb8152f31 ("mptcp: token: move retry to caller")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 2c5ebd001d4f ("mptcp: refactor token container"),
pr_debug() is called before mptcp_crypto_key_gen_sha() in
mptcp_token_new_connect(), so the output local_key, token and
idsn are 0, like:
MPTCP: ssk=00000000f6b3c4a2, local_key=0, token=0, idsn=0
Move pr_debug() after mptcp_crypto_key_gen_sha().
Fixes: 2c5ebd001d4f ("mptcp: refactor token container")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mat Martineau says:
====================
mptcp: Fixes for 5.13
These patches address two issues in MPTCP.
Patch 1 fixes a locking issue affecting MPTCP-level retransmissions.
Patches 2-4 improve handling of out-of-order packet arrival early
in a connection, so it falls back to TCP rather than forcing a
reset. Includes a selftest.
====================
Link: https://lore.kernel.org/r/20210527233140.182728-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The previous commit noted that we can have fallback
scenario due to OoO (or packet drop). Update the self-tests
accordingly
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When some mapping related errors occurs we close the main
MPC subflow with a RST. We should instead fallback gracefully
to TCP, and do the reset only for MPJ subflows.
Fixes: d22f4988ffec ("mptcp: process MP_CAPABLE data option")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/192
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In subflow_syn_recv_sock() we currently skip options parsing
for OoO packet, given that such packets may not carry the relevant
MPC option.
If the peer generates an MPC+data TSO packet and some of the early
segments are lost or get reorder, we server will ignore the peer key,
causing transient, unexpected fallback to TCP.
The solution is always parsing the incoming MPTCP options, and
do the fallback only for in-order packets. This actually cleans
the existing code a bit.
Fixes: d22f4988ffec ("mptcp: process MP_CAPABLE data option")
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MPTCP sk_forward_memory handling is a bit special, as such field
is protected by the msk socket spin_lock, instead of the plain
socket lock.
Currently we have a code path updating such field without handling
the relevant lock:
__mptcp_retrans() -> __mptcp_clean_una_wakeup()
Several helpers in __mptcp_clean_una_wakeup() will update
sk_forward_alloc, possibly causing such field corruption, as reported
by Matthieu.
Address the issue providing and using a new variant of blamed function
which explicitly acquires the msk spin lock.
Fixes: 64b9cea7a0af ("mptcp: fix spurious retransmissions")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/172
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Followup patch will add a CONFIG_RETPOLINE wrapper to avoid
the ops->lookup() indirection cost for retpoline builds.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We don't need a valid MXCSR state for the lookup routines, none of
the instructions we use rely on or affect any bit in the MXCSR
register.
Instead of calling kernel_fpu_begin(), we can pass 0 as mask to
kernel_fpu_begin_mask() and spare one LDMXCSR instruction.
Commit 49200d17d27d ("x86/fpu/64: Don't FNINIT in kernel_fpu_begin()")
already speeds up lookups considerably, and by dropping the MCXSR
initialisation we can now get a much smaller, but measurable, increase
in matching rates.
The table below reports matching rates and a wild approximation of
clock cycles needed for a match in a "port,net" test with 10 entries
from selftests/netfilter/nft_concat_range.sh, limited to the first
field, i.e. the port (with nft_set_rbtree initialisation skipped), run
on a single AMD Epyc 7351 thread (2.9GHz, 512 KiB L1D$, 8 MiB L2$).
The (very rough) estimation of clock cycles is obtained by simply
dividing frequency by matching rate. The "cycles spared" column refers
to the difference in cycles compared to the previous row, and the rate
increase also refers to the previous row. Results are averages of six
runs.
Merely for context, I'm also reporting packet rates obtained by
skipping kernel_fpu_begin() and kernel_fpu_end() altogether (which
shows a very limited impact now), as well as skipping the whole lookup
function, compared to simply counting and dropping all packets using
the netdev hook drop (see nft_concat_range.sh for details). This
workload also includes packet generation with pktgen and the receive
path of veth.
|matching| est. | cycles | rate |
| rate | cycles | spared |increase|
| (Mpps) | | | |
--------------------------------------|--------|--------|--------|--------|
FNINIT, LDMXCSR (before 49200d17d27d) | 5.245 | 553 | - | - |
LDMXCSR only (with 49200d17d27d) | 6.347 | 457 | 96 | 21.0% |
Without LDMXCSR (this patch) | 6.461 | 449 | 8 | 1.8% |
-------- for reference only: ---------|--------|--------|--------|--------|
Without kernel_fpu_begin() | 6.513 | 445 | 4 | 0.8% |
Without actual matching (return true) | 7.649 | 379 | 66 | 17.4% |
Without lookup operation (netdev drop)| 10.320 | 281 | 98 | 34.9% |
The clock cycles spared by avoiding LDMXCSR appear to be in line with CPI
and latency indicated in the manuals of comparable architectures: Intel
Skylake (CPI: 1, latency: 7) and AMD 12h (latency: 12) -- I couldn't find
this information for AMD 17h.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Chunks are SCTP header extensions similar in implementation to IPv6
extension headers or TCP options. Reusing exthdr expression to find and
extract field values from them is therefore pretty straightforward.
For now, this supports extracting data from chunks at a fixed offset
(and length) only - chunks themselves are an extensible data structure;
in order to make all fields available, a nested extension search is
needed.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-05-26
Misc update for mlx5 driver,
1) Clean up patches for lag and SF
2) Reserve bit 31 in steering register C1 for IPSec offload usage
3) Move steering tables pool logic into the steering core and
increase the maximum table size to 2G entries when software steering
is enabled.
* tag 'mlx5-updates-2021-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Fix lag port remapping logic
net/mlx5: Use boolean arithmetic to evaluate roce_lag
net/mlx5: Remove unnecessary spin lock protection
net/mlx5: Cap the maximum flow group size to 16M entries
net/mlx5: DR, Set max table size to 2G entries
net/mlx5: Move chains ft pool to be used by all firmware steering
net/mlx5: Move table size calculation to steering cmd layer
net/mlx5: Add case for FS_FT_NIC_TX FT in MLX5_CAP_FLOWTABLE_TYPE
net/mlx5: DR, Remove unused field of send_ring struct
net/mlx5e: RX, Remove unnecessary check in RX CQE compression handling
net/mlx5e: IPsec/rep_tc: Fix rep_tc_update_skb drops IPsec packet
net/mlx5e: TC: Reserved bit 31 of REG_C1 for IPsec offload
net/mlx5e: TC: Use bit counts for register mapping
net/mlx5: CT: Avoid reusing modify header context for natted entries
net/mlx5e: CT, Remove newline from ct_dbg call
====================
Link: https://lore.kernel.org/r/20210527185624.694304-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace union with a couple of pointers in order to fix the following
out-of-bounds warning:
CC [M] drivers/net/ethernet/intel/ixgbe/ixgbe_common.o
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c: In function ‘ixgbe_host_interface_command’:
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:3729:13: warning: array subscript 1 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
3729 | bp->u32arr[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
| ~~~~~~~~~~^~~~
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:3682:7: note: while referencing ‘u32arr’
3682 | u32 u32arr[1];
| ^~~~~~
This helps with the ongoing efforts to globally enable -Warray-bounds.
Link: https://github.com/KSPP/linux/issues/109
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20210527173424.362456-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gatis Peisenieks says:
====================
add 4 RX/TX queue support for Mikrotik 10/25G NIC
More RX/TX queues on a network card help spread the CPU load among
cores and achieve higher overall networking performance.
This patch set adds support for 4 RX/TX queues available on
Mikrotik 10/25G NIC.
v4:
- addressed comments from Jakub Kicinski:
- split up the change in more manageable chunks
- changed member order in structs for tighter packing
- fixed style issues
- reverted to calling napi_alloc_skb only from within poll
as before
v3:
- fix kernel-doc complaints on comments as pointed out by
David Miller
v2:
- rebase on net-next master as requested by David Miller
====================
Link: https://lore.kernel.org/r/20210527144423.3395719-1-gatis@mikrotik.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
More RX/TX queues on a network card help spread the CPU load among
cores and achieve higher overall networking performance. The new
Mikrotik 10/25G NIC supports 4 RX and 4 TX queues. TX queues are
treated with equal priority. RX queue balancing is fixed based on
L2/L3/L4 hash.
This adds support for 4 RX/TX queues while maintaining backwards
compatibility with older hardware.
Simultaneous TX + RX performance on AMD Threadripper 3960X
with Mikrotik 10/25G NIC improved from 1.6Mpps to 3.2Mpps per port.
Backwards compatiblitiy was verified with AR8151 and AR8131 based
NICs.
Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move napi and other per queue members into per rx queue struct.
Allocate max rx queues that any hw supported by the driver might have.
Patch that actually enables multiple rx queues will follow.
Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To get more performance from using multiple tx queues one needs
a per tx queue napi.
Move tx napi from per adapter struct into per tx queue struct.
Patch that actually enables multiple tx queues will follow.
Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To support NICs that allow for more than one tx queue it is
required to detect NIC type early during probe. This is moves
NIC type detection before netdev_alloc to prepare for that.
Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Fix incorrect sockopts unregistration from error path,
from Florian Westphal.
2) A few patches to provide better error reporting when missing kernel
netfilter options are missing in .config.
3) Fix dormant table flag updates.
4) Memleak in IPVS when adding service with IP_VS_SVC_F_HASHED flag.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service
netfilter: nf_tables: fix table flag updates
netfilter: nf_tables: extended netlink error reporting for chain type
netfilter: nf_tables: missing error reporting for not selected expressions
netfilter: conntrack: unregister ipv4 sockopts on error unwind
====================
Link: https://lore.kernel.org/r/20210527190115.98503-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix current behavior of skipping template allocation in case the
ct action is in zone 0.
Skipping the allocation may cause the datapath ct code to ignore the
entire ct action with all its attributes (commit, nat) in case the ct
action in zone 0 was preceded by a ct clear action.
The ct clear action sets the ct_state to untracked and resets the
skb->_nfct pointer. Under these conditions and without an allocated
ct template, the skb->_nfct pointer will remain NULL which will
cause the tc ct action handler to exit without handling commit and nat
actions, if such exist.
For example, the following rule in OVS dp:
recirc_id(0x2),ct_state(+new-est-rel-rpl+trk),ct_label(0/0x1), \
in_port(eth0),actions:ct_clear,ct(commit,nat(src=10.11.0.12)), \
recirc(0x37a)
Will result in act_ct skipping the commit and nat actions in zone 0.
The change removes the skipping of template allocation for zone 0 and
treats it the same as any other zone.
Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/20210526170110.54864-1-lariel@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently established connections are not offloaded if the filter has a
"ct commit" action. This behavior will not offload connections of the
following scenario:
$ tc_filter add dev $DEV ingress protocol ip prio 1 flower \
ct_state -trk \
action ct commit action goto chain 1
$ tc_filter add dev $DEV ingress protocol ip chain 1 prio 1 flower \
action mirred egress redirect dev $DEV2
$ tc_filter add dev $DEV2 ingress protocol ip prio 1 flower \
action ct commit action goto chain 1
$ tc_filter add dev $DEV2 ingress protocol ip prio 1 chain 1 flower \
ct_state +trk+est \
action mirred egress redirect dev $DEV
Offload established connections, regardless of the commit flag.
Fixes: 46475bb20f4b ("net/sched: act_ct: Software offload of established flows")
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Link: https://lore.kernel.org/r/1622029449-27060-1-git-send-email-paulb@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jiri Pirko says:
====================
mlx*: devlink dev info versions adjustments
Couple of adjustments in Mellanox drivers regarding devlink dev
versions fill-up.
====================
Link: https://lore.kernel.org/r/20210526104509.761807-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of having the string spelled out in the driver, use the global
define with the same value.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To be aligned with the rest of the drivers, expose FW version under "fw"
keyword in devlink dev info, in addition to the existing "fw.version",
which is currently Mellanox-specific.
devlink output before:
running:
fw.version 30.2008.2018
after:
running:
fw.version 30.2008.2018
fw 30.2008.2018
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To be aligned with the rest of the drivers, expose FW version under "fw"
keyword in devlink dev info, in addition to the existing "fw.version",
which is currently Mellanox-specific.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|