summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-05-22net/mlx5e: Fix SQ wake logic in ptp napi_poll contextRahul Rameshbabu
Check in the mlx5e_ptp_poll_ts_cq context if the ptp tx sq should be woken up. Before change, the ptp tx sq may never wake up if the ptp tx ts skb fifo is full when mlx5e_poll_tx_cq checks if the queue should be woken up. Fixes: 1880bc4e4a96 ("net/mlx5e: Add TX port timestamp support") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-22net/mlx5e: Fix deadlock in tc route query codeVlad Buslov
Cited commit causes ABBA deadlock[0] when peer flows are created while holding the devcom rw semaphore. Due to peer flows offload implementation the lock is taken much higher up the call chain and there is no obvious way to easily fix the deadlock. Instead, since tc route query code needs the peer eswitch structure only to perform a lookup in xarray and doesn't perform any sleeping operations with it, refactor the code for lockless execution in following ways: - RCUify the devcom 'data' pointer. When resetting the pointer synchronously wait for RCU grace period before returning. This is fine since devcom is currently only used for synchronization of pairing/unpairing of eswitches which is rare and already expensive as-is. - Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has already been used in some unlocked contexts without proper annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't an issue since all relevant code paths checked it again after obtaining the devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as "best effort" check to return NULL when devcom is being unpaired. Note that while RCU read lock doesn't prevent the unpaired flag from being changed concurrently it still guarantees that reader can continue to use 'data'. - Refactor mlx5e_tc_query_route_vport() function to use new mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock. [0]: [ 164.599612] ====================================================== [ 164.600142] WARNING: possible circular locking dependency detected [ 164.600667] 6.3.0-rc3+ #1 Not tainted [ 164.601021] ------------------------------------------------------ [ 164.601557] handler1/3456 is trying to acquire lock: [ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.603078] but task is already holding lock: [ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.604459] which lock already depends on the new lock. [ 164.605190] the existing dependency chain (in reverse order) is: [ 164.605848] -> #1 (&comp->sem){++++}-{3:3}: [ 164.606380] down_read+0x39/0x50 [ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core] [ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core] [ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core] [ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core] [ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core] [ 164.610741] tc_setup_cb_add+0xd4/0x200 [ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.611661] fl_change+0xc95/0x18a0 [cls_flower] [ 164.612116] tc_new_tfilter+0x3fc/0xd20 [ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.612936] netlink_rcv_skb+0x54/0x100 [ 164.613339] netlink_unicast+0x190/0x250 [ 164.613746] netlink_sendmsg+0x245/0x4a0 [ 164.614150] sock_sendmsg+0x38/0x60 [ 164.614522] ____sys_sendmsg+0x1d0/0x1e0 [ 164.614934] ___sys_sendmsg+0x80/0xc0 [ 164.615320] __sys_sendmsg+0x51/0x90 [ 164.615701] do_syscall_64+0x3d/0x90 [ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.616568] -> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}: [ 164.617210] __lock_acquire+0x159e/0x26e0 [ 164.617638] lock_acquire+0xc2/0x2a0 [ 164.618018] __mutex_lock+0x92/0xcd0 [ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.618943] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.619471] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.620021] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.620564] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.621125] tc_setup_cb_add+0xd4/0x200 [ 164.621531] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.622047] fl_change+0xc95/0x18a0 [cls_flower] [ 164.622500] tc_new_tfilter+0x3fc/0xd20 [ 164.622906] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.623324] netlink_rcv_skb+0x54/0x100 [ 164.623727] netlink_unicast+0x190/0x250 [ 164.624138] netlink_sendmsg+0x245/0x4a0 [ 164.624544] sock_sendmsg+0x38/0x60 [ 164.624919] ____sys_sendmsg+0x1d0/0x1e0 [ 164.625340] ___sys_sendmsg+0x80/0xc0 [ 164.625731] __sys_sendmsg+0x51/0x90 [ 164.626117] do_syscall_64+0x3d/0x90 [ 164.626502] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.626995] other info that might help us debug this: [ 164.627725] Possible unsafe locking scenario: [ 164.628268] CPU0 CPU1 [ 164.628683] ---- ---- [ 164.629098] lock(&comp->sem); [ 164.629421] lock(&esw->offloads.encap_tbl_lock); [ 164.630066] lock(&comp->sem); [ 164.630555] lock(&esw->offloads.encap_tbl_lock); [ 164.630993] *** DEADLOCK *** [ 164.631575] 3 locks held by handler1/3456: [ 164.631962] #0: ffff888124b75130 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200 [ 164.632703] #1: ffff888116e512b8 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core] [ 164.633552] #2: ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.634435] stack backtrace: [ 164.634883] CPU: 17 PID: 3456 Comm: handler1 Not tainted 6.3.0-rc3+ #1 [ 164.635431] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 164.636340] Call Trace: [ 164.636616] <TASK> [ 164.636863] dump_stack_lvl+0x47/0x70 [ 164.637217] check_noncircular+0xfe/0x110 [ 164.637601] __lock_acquire+0x159e/0x26e0 [ 164.637977] ? mlx5_cmd_set_fte+0x5b0/0x830 [mlx5_core] [ 164.638472] lock_acquire+0xc2/0x2a0 [ 164.638828] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.639339] ? lock_is_held_type+0x98/0x110 [ 164.639728] __mutex_lock+0x92/0xcd0 [ 164.640074] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.640576] ? __lock_acquire+0x382/0x26e0 [ 164.640958] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641468] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641965] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.642454] ? lock_release+0xbf/0x240 [ 164.642819] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.643318] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.643835] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.644340] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.644862] ? lock_acquire+0xc2/0x2a0 [ 164.645219] tc_setup_cb_add+0xd4/0x200 [ 164.645588] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.646067] fl_change+0xc95/0x18a0 [cls_flower] [ 164.646488] tc_new_tfilter+0x3fc/0xd20 [ 164.646861] ? tc_del_tfilter+0x810/0x810 [ 164.647236] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.647621] ? rtnl_setlink+0x160/0x160 [ 164.647982] netlink_rcv_skb+0x54/0x100 [ 164.648348] netlink_unicast+0x190/0x250 [ 164.648722] netlink_sendmsg+0x245/0x4a0 [ 164.649090] sock_sendmsg+0x38/0x60 [ 164.649434] ____sys_sendmsg+0x1d0/0x1e0 [ 164.649804] ? copy_msghdr_from_user+0x6d/0xa0 [ 164.650213] ___sys_sendmsg+0x80/0xc0 [ 164.650563] ? lock_acquire+0xc2/0x2a0 [ 164.650926] ? lock_acquire+0xc2/0x2a0 [ 164.651286] ? __fget_files+0x5/0x190 [ 164.651644] ? find_held_lock+0x2b/0x80 [ 164.652006] ? __fget_files+0xb9/0x190 [ 164.652365] ? lock_release+0xbf/0x240 [ 164.652723] ? __fget_files+0xd3/0x190 [ 164.653079] __sys_sendmsg+0x51/0x90 [ 164.653435] do_syscall_64+0x3d/0x90 [ 164.653784] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.654229] RIP: 0033:0x7f378054f8bd [ 164.654577] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 6a c3 f4 ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 be c3 f4 ff 48 [ 164.656041] RSP: 002b:00007f377fa114b0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 164.656701] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f378054f8bd [ 164.657297] RDX: 0000000000000000 RSI: 00007f377fa11540 RDI: 0000000000000014 [ 164.657885] RBP: 00007f377fa12278 R08: 0000000000000000 R09: 000000000000015c [ 164.658472] R10: 00007f377fa123d0 R11: 0000000000000293 R12: 0000560962d99bd0 [ 164.665317] R13: 0000000000000000 R14: 0000560962d99bd0 R15: 00007f377fa11540 Fixes: f9d196bd632b ("net/mlx5e: Use correct eswitch for stack devices with lag") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-22net/mlx5: Fix error message when failing to allocate device memoryRoi Dayan
Fix spacing for the error and also the correct error code pointer. Fixes: c9b9dcb430b3 ("net/mlx5: Move device memory management to mlx5_core") Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-22net/mlx5e: Use correct encap attribute during invalidationVlad Buslov
With introduction of post action infrastructure most of the users of encap attribute had been modified in order to obtain the correct attribute by calling mlx5e_tc_get_encap_attr() helper instead of assuming encap action is always on default attribute. However, the cited commit didn't modify mlx5e_invalidate_encap() which prevents it from destroying correct modify header action which leads to a warning [0]. Fix the issue by using correct attribute. [0]: Feb 21 09:47:35 c-237-177-40-045 kernel: WARNING: CPU: 17 PID: 654 at drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:684 mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: RIP: 0010:mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: Call Trace: Feb 21 09:47:35 c-237-177-40-045 kernel: <TASK> Feb 21 09:47:35 c-237-177-40-045 kernel: mlx5e_tc_fib_event_work+0x8e3/0x1f60 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: ? mlx5e_take_all_encap_flows+0xe0/0xe0 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: ? lock_downgrade+0x6d0/0x6d0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0 Feb 21 09:47:35 c-237-177-40-045 kernel: process_one_work+0x7c2/0x1310 Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? pwq_dec_nr_in_flight+0x230/0x230 Feb 21 09:47:35 c-237-177-40-045 kernel: ? rwlock_bug.part.0+0x90/0x90 Feb 21 09:47:35 c-237-177-40-045 kernel: worker_thread+0x59d/0xec0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? __kthread_parkme+0xd9/0x1d0 Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-22net/mlx5: DR, Check force-loopback RC QP capability independently from RoCEYevgeny Kliteynik
SW Steering uses RC QP for writing STEs to ICM. This writingis done in LB (loopback), and FL (force-loopback) QP is preferred for performance. FL is available when RoCE is enabled or disabled based on RoCE caps. This patch adds reading of FL capability from HCA caps in addition to the existing reading from RoCE caps, thus fixing the case where we didn't have loopback enabled when RoCE was disabled. Fixes: 7304d603a57a ("net/mlx5: DR, Add support for force-loopback QP") Signed-off-by: Itamar Gozlan <igozlan@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-22net/mlx5: DR, Fix crc32 calculation to work on big-endian (BE) CPUsErez Shitrit
When calculating crc for hash index we use the function crc32 that calculates for little-endian (LE) arch. Then we convert it to network endianness using htonl(), but it's wrong to do the conversion in BE archs since the crc32 value is already LE. The solution is to switch the bytes from the crc result for all types of arc. Fixes: 40416d8ede65 ("net/mlx5: DR, Replace CRC32 implementation to use kernel lib") Signed-off-by: Erez Shitrit <erezsh@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-22net/mlx5: Handle pairing of E-switch via uplink un/load APIsShay Drory
In case user switch a device from switchdev mode to legacy mode, mlx5 first unpair the E-switch and afterwards unload the uplink vport. From the other hand, in case user remove or reload a device, mlx5 first unload the uplink vport and afterwards unpair the E-switch. The latter is causing a bug[1], hence, handle pairing of E-switch as part of uplink un/load APIs. [1] In case VF_LAG is used, every tc fdb flow is duplicated to the peer esw. However, the original esw keeps a pointer to this duplicated flow, not the peer esw. e.g.: if user create tc fdb flow over esw0, the flow is duplicated over esw1, in FW/HW, but in SW, esw0 keeps a pointer to the duplicated flow. During module unload while a peer tc fdb flow is still offloaded, in case the first device to be removed is the peer device (esw1 in the example above), the peer net-dev is destroyed, and so the mlx5e_priv is memset to 0. Afterwards, the peer device is trying to unpair himself from the original device (esw0 in the example above). Unpair API invoke the original device to clear peer flow from its eswitch (esw0), but the peer flow, which is stored over the original eswitch (esw0), is trying to use the peer mlx5e_priv, which is memset to 0 and result in bellow kernel-oops. [ 157.964081 ] BUG: unable to handle page fault for address: 000000000002ce60 [ 157.964662 ] #PF: supervisor read access in kernel mode [ 157.965123 ] #PF: error_code(0x0000) - not-present page [ 157.965582 ] PGD 0 P4D 0 [ 157.965866 ] Oops: 0000 [#1] SMP [ 157.967670 ] RIP: 0010:mlx5e_tc_del_fdb_flow+0x48/0x460 [mlx5_core] [ 157.976164 ] Call Trace: [ 157.976437 ] <TASK> [ 157.976690 ] __mlx5e_tc_del_fdb_peer_flow+0xe6/0x100 [mlx5_core] [ 157.977230 ] mlx5e_tc_clean_fdb_peer_flows+0x67/0x90 [mlx5_core] [ 157.977767 ] mlx5_esw_offloads_unpair+0x2d/0x1e0 [mlx5_core] [ 157.984653 ] mlx5_esw_offloads_devcom_event+0xbf/0x130 [mlx5_core] [ 157.985212 ] mlx5_devcom_send_event+0xa3/0xb0 [mlx5_core] [ 157.985714 ] esw_offloads_disable+0x5a/0x110 [mlx5_core] [ 157.986209 ] mlx5_eswitch_disable_locked+0x152/0x170 [mlx5_core] [ 157.986757 ] mlx5_eswitch_disable+0x51/0x80 [mlx5_core] [ 157.987248 ] mlx5_unload+0x2a/0xb0 [mlx5_core] [ 157.987678 ] mlx5_uninit_one+0x5f/0xd0 [mlx5_core] [ 157.988127 ] remove_one+0x64/0xe0 [mlx5_core] [ 157.988549 ] pci_device_remove+0x31/0xa0 [ 157.988933 ] device_release_driver_internal+0x18f/0x1f0 [ 157.989402 ] driver_detach+0x3f/0x80 [ 157.989754 ] bus_remove_driver+0x70/0xf0 [ 157.990129 ] pci_unregister_driver+0x34/0x90 [ 157.990537 ] mlx5_cleanup+0xc/0x1c [mlx5_core] [ 157.990972 ] __x64_sys_delete_module+0x15a/0x250 [ 157.991398 ] ? exit_to_user_mode_prepare+0xea/0x110 [ 157.991840 ] do_syscall_64+0x3d/0x90 [ 157.992198 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 04de7dda7394 ("net/mlx5e: Infrastructure for duplicated offloading of TC flows") Fixes: 1418ddd96afd ("net/mlx5e: Duplicate offloaded TC eswitch rules under uplink LAG") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-22net/mlx5: Collect command failures data only for known commandsShay Drory
DEVX can issue a general command, which is not used by mlx5 driver. In case such command is failed, mlx5 is trying to collect the failure data, However, mlx5 doesn't create a storage for this command, since mlx5 doesn't use it. This lead to array-index-out-of-bounds error. Fix it by checking whether the command is known before collecting the failure data. Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs") Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-22net/handshake: Fix sock->file allocationChuck Lever
sock->file = sock_alloc_file(sock, O_NONBLOCK, NULL); ^^^^ ^^^^ sock_alloc_file() calls release_sock() on error but the left hand side of the assignment dereferences "sock". This isn't the bug and I didn't report this earlier because there is an assert that it doesn't fail. net/handshake/handshake-test.c:221 handshake_req_submit_test4() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:233 handshake_req_submit_test4() warn: 'req' was already freed. net/handshake/handshake-test.c:254 handshake_req_submit_test5() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:290 handshake_req_submit_test6() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:321 handshake_req_cancel_test1() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:355 handshake_req_cancel_test2() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:367 handshake_req_cancel_test2() warn: 'req' was already freed. net/handshake/handshake-test.c:395 handshake_req_cancel_test3() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:407 handshake_req_cancel_test3() warn: 'req' was already freed. net/handshake/handshake-test.c:451 handshake_req_destroy_test1() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:463 handshake_req_destroy_test1() warn: 'req' was already freed. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: 88232ec1ec5e ("net/handshake: Add Kunit tests for the handshake consumer API") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/168451609436.45209.15407022385441542980.stgit@oracle-102.nfsv4bat.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-22net/handshake: Squelch allocation warning during Kunit testChuck Lever
The "handshake_req_alloc excessive privsize" kunit test is intended to check what happens when the maximum privsize is exceeded. The WARN_ON_ONCE_GFP at mm/page_alloc.c:4744 can be disabled safely for this test. Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Fixes: 88232ec1ec5e ("net/handshake: Add Kunit tests for the handshake consumer API") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/168451636052.47152.9600443326570457947.stgit@oracle-102.nfsv4bat.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-223c589_cs: Fix an error handling path in tc589_probe()Christophe JAILLET
Should tc589_config() fail, some resources need to be released as already done in the remove function. Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/d8593ae867b24c79063646e36f9b18b0790107cb.1684575975.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-22forcedeth: Fix an error handling path in nv_probe()Christophe JAILLET
If an error occures after calling nv_mgmt_acquire_sema(), it should be undone with a corresponding nv_mgmt_release_sema() call. Add it in the error handling path of the probe as already done in the remove function. Fixes: cac1c52c3621 ("forcedeth: mgmt unit interface") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com> Link: https://lore.kernel.org/r/355e9a7d351b32ad897251b6f81b5886fcdc6766.1684571393.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-22Merge tag 'x86_urgent_for_6.4-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Dave Hansen: "This works around and issue where the INVLPG instruction may miss invalidating kernel TLB entries in recent hybrid CPUs. I do expect an eventual microcode fix for this. When the microcode version numbers are known, we can circle back around and add them the model table to disable this workaround" * tag 'x86_urgent_for_6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Avoid incomplete Global INVLPG flushes
2023-05-22Merge tag 'modules-6.4-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module fix from Luis Chamberlain: "Only one fix has trickled through. Harshit Mogalapalli found a use-after-free bug through static analysis with smatch" * tag 'modules-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: module: Fix use-after-free bug in read_file_mod_stats()
2023-05-22module: Fix use-after-free bug in read_file_mod_stats()Harshit Mogalapalli
Smatch warns: kernel/module/stats.c:394 read_file_mod_stats() warn: passing freed memory 'buf' We are passing 'buf' to simple_read_from_buffer() after freeing it. Fix this by changing the order of 'simple_read_from_buffer' and 'kfree'. Fixes: df3e764d8e5c ("module: add debug stats to help identify memory pressure") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-05-22Merge tag 'nfs-for-6.4-2' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds
Pull NFS client fixes from Anna Schumaker: "Stable Fix: - Don't change task->tk_status after the call to rpc_exit_task Other Bugfixes: - Convert kmap_atomic() to kmap_local_folio() - Fix a potential double free with READ_PLUS" * tag 'nfs-for-6.4-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFSv4.2: Fix a potential double free with READ_PLUS SUNRPC: Don't change task->tk_status after the call to rpc_exit_task NFS: Convert kmap_atomic() to kmap_local_folio()
2023-05-22bpf: fix a memory leak in the LRU and LRU_PERCPU hash mapsAnton Protopopov
The LRU and LRU_PERCPU maps allocate a new element on update before locking the target hash table bucket. Right after that the maps try to lock the bucket. If this fails, then maps return -EBUSY to the caller without releasing the allocated element. This makes the element untracked: it doesn't belong to either of free lists, and it doesn't belong to the hash table, so can't be re-used; this eventually leads to the permanent -ENOMEM on LRU map updates, which is unexpected. Fix this by returning the element to the local free list if bucket locking fails. Fixes: 20b6cc34ea74 ("bpf: Avoid hashtab deadlock with map_locked") Signed-off-by: Anton Protopopov <aspsk@isovalent.com> Link: https://lore.kernel.org/r/20230522154558.2166815-1-aspsk@isovalent.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-05-22ASoC: Intel: FixesMark Brown
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>: Series of fixes for issues found during development and testing, primarly for avs driver.
2023-05-22ALSA: hda: Fix unhandled register update during auto-suspend periodTakashi Iwai
It's reported that the recording started right after the driver probe doesn't work properly, and it turned out that this is related with the codec auto-suspend. Namely, after the probe phase, the usage count goes zero, and the auto-suspend is programmed, but the codec is kept still active until the auto-suspend expiration. When an application (e.g. alsactl) updates the mixer values at this moment, the values are cached but not actually written. Then, starting arecord thereafter also results in the silence because of the missing unmute. The root cause is the handling of "lazy update" mode; when a mixer value is updated *after* the suspend, it should update only the cache and exits. At the resume, the cached value is written to the device, in turn. The problem is that the current code misinterprets the state of auto-suspend as if it were already suspended. Although we can add the check of the actual device state after pm_runtime_get_if_in_use() for catching the missing state, this won't suffice; the second call of regmap_update_bits_check() will skip writing the register because the cache has been already updated by the first call. So we'd need fixes in two different places. OTOH, a simpler fix is to replace pm_runtime_get_if_in_use() with pm_runtime_get_if_active() (with ign_usage_count=true). This change implies that the driver takes the pm refcount if the device is still in ACTIVE state and continues the processing. A small caveat is that this will leave the auto-suspend timer. But, since the timer callback itself checks the device state and aborts gracefully when it's active, this won't be any substantial problem. Long story short: we address the missing register-write problem just by replacing the pm_runtime_*() call in snd_hda_keep_power_up(). Fixes: fc4f000bf8c0 ("ALSA: hda - Fix unexpected resume through regmap code path") Reported-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Closes: https://lore.kernel.org/r/a7478636-af11-92ab-731c-9b13c582a70d@linux.intel.com Suggested-by: Cezary Rojewski <cezary.rojewski@intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230518113520.15213-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-05-22m68k: Move signal frame following exception on 68020/030Finn Thain
On 68030/020, an instruction such as, moveml %a2-%a3/%a5,%sp@- may cause a stack page fault during instruction execution (i.e. not at an instruction boundary) and produce a format 0xB exception frame. In this situation, the value of USP will be unreliable. If a signal is to be delivered following the exception, this USP value is used to calculate the location for a signal frame. This can result in a corrupted user stack. The corruption was detected in dash (actually in glibc) where it showed up as an intermittent "stack smashing detected" message and crash following signal delivery for SIGCHLD. It was hard to reproduce that failure because delivery of the signal raced with the page fault and because the kernel places an unpredictable gap of up to 7 bytes between the USP and the signal frame. A format 0xB exception frame can be produced by a bus error or an address error. The 68030 Users Manual says that address errors occur immediately upon detection during instruction prefetch. The instruction pipeline allows prefetch to overlap with other instructions, which means an address error can arise during the execution of a different instruction. So it seems likely that this patch may help in the address error case also. Reported-and-tested-by: Stan Johnson <userm57@yahoo.com> Link: https://lore.kernel.org/all/CAMuHMdW3yD22_ApemzW_6me3adq6A458u1_F0v-1EYwK_62jPA@mail.gmail.com/ Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: stable@vger.kernel.org Co-developed-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/9e66262a754fcba50208aa424188896cc52a1dd1.1683365892.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2023-05-22spi: spi-cadence: Interleave write of TX and read of RX FIFOCharles Keepax
When working in slave mode it seems the timing is exceedingly tight. The TX FIFO can never empty, because the master is driving the clock so zeros would be sent for those bytes where the FIFO is empty. Return to interleaving the writing of the TX FIFO and the reading of the RX FIFO to try to ensure the data is available when required. Fixes: a84c11e16dc2 ("spi: spi-cadence: Avoid read of RX FIFO before its ready") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230518093927.711358-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22ASoC: dt-bindings: tlv320aic32x4: Fix supply namesDavid Epping
The term "-supply" is a suffix to regulator names. Signed-off-by: David Epping <david.epping@missinglinkelectronics.com> Link: https://lore.kernel.org/r/20230519110545.GA18663@nucnuc.mle Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22ASoC: Intel: avs: Add missing checks on FE startupAmadeusz Sławiński
Constraint functions have return values, they should be checked for potential errors. Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-8-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22ASoC: Intel: avs: Fix avs_path_module::instance_id sizeAmadeusz Sławiński
All IPCs using instance_id use 8 bit value. Original commit used 16 bit value because FW reports possible max value in 16 bit field, but in practice FW limits the value to 8 bits. Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-7-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22ASoC: Intel: avs: Account for UID of ACPI deviceCezary Rojewski
Configurations with multiple codecs attached to the platform are supported but only if each from the set is different. Add new field representing the 'Unique ID' so that codecs that share Vendor and Part IDs can be differentiated and thus enabling support for such configurations. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-6-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22ASoC: Intel: avs: Fix declaration of enum avs_channel_configCezary Rojewski
Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is reserved for 'C7_1' instead. Fixes: 580a5912d1fe ("ASoC: Intel: avs: Declare module configuration types") Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-5-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22ASoC: Intel: Skylake: Fix declaration of enum skl_ch_cfgCezary Rojewski
Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is reserved for 'C7_1' instead. Fixes: 04afbbbb1cba ("ASoC: Intel: Skylake: Update the topology interface structure") Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-4-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22ASoC: Intel: avs: Access path components under lockAmadeusz Sławiński
Path and its components should be accessed under lock to prevent problems with one thread modifying them while other tries to read. Fixes: c8c960c10971 ("ASoC: Intel: avs: APL-based platforms support") Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-3-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22ASoC: Intel: avs: Fix module lookupAmadeusz Sławiński
When changing value of kcontrol, FW module to which data should be send needs to be found. Currently it is done in improper way, fix it. Change function name to indicate that it looks only for volume module. This allows to change volume during runtime, instead of only changing init value. Fixes: be2b81b519d7 ("ASoC: Intel: avs: Parse control tuples") Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-2-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22sctp: fix an issue that plpmtu can never go to complete stateXin Long
When doing plpmtu probe, the probe size is growing every time when it receives the ACK during the Search state until the probe fails. When the failure occurs, pl.probe_high is set and it goes to the Complete state. However, if the link pmtu is huge, like 65535 in loopback_dev, the probe eventually keeps using SCTP_MAX_PLPMTU as the probe size and never fails. Because of that, pl.probe_high can not be set, and the plpmtu probe can never go to the Complete state. Fix it by setting pl.probe_high to SCTP_MAX_PLPMTU when the probe size grows to SCTP_MAX_PLPMTU in sctp_transport_pl_recv(). Also, not allow the probe size greater than SCTP_MAX_PLPMTU in the Complete state. Fixes: b87641aff9e7 ("sctp: do state transition when a probe succeeds on HB ACK recv path") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-22ALSA: hda/ca0132: add quirk for EVGA X299 DARKAdam Stylinski
This quirk is necessary for surround and other DSP effects to work with the onboard ca0132 based audio chipset for the EVGA X299 dark mainboard. Signed-off-by: Adam Stylinski <kungfujesus06@gmail.com> Cc: <stable@vger.kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=67071 Link: https://lore.kernel.org/r/ZGopOe19T1QOwizS@eggsbenedict.adamsnet Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-05-21Linux 6.4-rc3v6.4-rc3Linus Torvalds
2023-05-21Merge tag 'uml-for-linus-6.4-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux Pull UML fix from Richard Weinberger: - Fix modular build for UML watchdog * tag 'uml-for-linus-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: um: harddog: fix modular build
2023-05-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "ARM: - Plug a race in the stage-2 mapping code where the IPA and the PA would end up being out of sync - Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...) - FP/SVE/SME documentation update, in the hope that this field becomes clearer... - Add workaround for Apple SEIS brokenness to a new SoC - Random comment fixes x86: - add MSR_IA32_TSX_CTRL into msrs_to_save - fixes for XCR0 handling in SGX enclaves Generic: - Fix vcpu_array[0] races - Fix race between starting a VM and 'reboot -f'" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: add MSR_IA32_TSX_CTRL into msrs_to_save KVM: x86: Don't adjust guest's CPUID.0x12.1 (allowed SGX enclave XFRM) KVM: VMX: Don't rely _only_ on CPUID to enforce XCR0 restrictions for ECREATE KVM: Fix vcpu_array[0] races KVM: VMX: Fix header file dependency of asm/vmx.h KVM: Don't enable hardware after a restart/shutdown is initiated KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations KVM: arm64: Clarify host SME state management KVM: arm64: Restructure check for SVE support in FP trap handler KVM: arm64: Document check for TIF_FOREIGN_FPSTATE KVM: arm64: Fix repeated words in comments KVM: arm64: Constify start/end/phys fields of the pgtable walker data KVM: arm64: Infer PA offset from VA in hyp map walker KVM: arm64: Infer the PA offset from IPA in stage-2 map walker KVM: arm64: Use the bitmap API to allocate bitmaps KVM: arm64: Slightly optimize flush_context()
2023-05-21Merge tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fail graciously if BUILD_BPF_SKEL=1 is specified and clang isn't available - Add empty 'struct rq' to 'perf lock contention' to satisfy libbpf 'runqueue' type verification. This feature is built only with BUILD_BPF_SKEL=1 - Make vmlinux.h use bpf.h and perf_event.h in source directory, not system ones that may be old and not have things like 'union perf_sample_weight' - Add system include paths to BPF builds to pick things missing in the headers included by clang -target bpf - Update various header copies with the kernel sources - Change divide by zero and not supported events behavior to show 'nan'/'not counted' in 'perf stat' output. This happens when using things like 'perf stat -M TopdownL2 true', involving JSON metrics - Update no event/metric expectations affected by using JSON metrics in 'perf stat -ddd' perf test - Avoid segv with 'perf stat --topdown' for metrics without a group - Do not assume which events may have a PMU name, allowing the logic to keep an AUX event group together. Makes this usecase work again: $ perf record --no-bpf-event -c 10 -e '{intel_pt//,tlb_flush.stlb_any/aux-sample-size=8192/pp}:u' -- sleep 0.1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.078 MB perf.data ] $ perf script -F-dso,+addr | grep -C5 tlb_flush.stlb_any | head -11 sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc82a2 dl_main+0x9a2 => 7f5350cb38f0 _dl_add_to_namespace_list+0x0 sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cb3908 _dl_add_to_namespace_list+0x18 => 7f5350cbb080 rtld_mutex_dummy+0x0 sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc8350 dl_main+0xa50 => 0 [unknown] sleep 20444 [003] 7939.510244: 1 branches:uH: 7f5350cc83ca dl_main+0xaca => 7f5350caeb60 _dl_process_pt_gnu_property+0x0 sleep 20444 [003] 7939.510245: 1 branches:uH: 7f5350caeb60 _dl_process_pt_gnu_property+0x0 => 0 [unknown] sleep 20444 7939.510245: 10 tlb_flush.stlb_any/aux-sample-size=8192/pp: 0 7f5350caeb60 _dl_process_pt_gnu_property+0x0 sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc87fe dl_main+0xefe => 7f5350ccd240 strcmp+0x0 sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc8862 dl_main+0xf62 => 0 [unknown] - Add a check for the above use case in 'perf test test_intel_pt' - Fix build with refcount checking on arm64, it was still accessing fields that need to be wrapped so that the refcounted struct gets checked - Fix contextid validation in ARM's CS-ETM, so that older kernels without that field can still be supported - Skip unsupported aggregation for stat events found in perf.data files in 'perf script' - Add stat test for record and script to check the previous problem - Remove needless debuginfod queries from 'perf test java symbol', this was just making the test take a long time to complete - Address python SafeConfigParser() deprecation warning in 'perf test attr' - Fix __NR_execve undeclared on i386 'perf bench syscall' build error * tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (33 commits) perf bench syscall: Fix __NR_execve undeclared build error perf test attr: Fix python SafeConfigParser() deprecation warning perf test attr: Update no event/metric expectations tools headers disabled-features: Sync with the kernel sources tools headers UAPI: Sync arch prctl headers with the kernel sources tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench' tools headers x86 cpufeatures: Sync with the kernel sources tools headers UAPI: Sync s390 syscall table file that wires up the memfd_secret syscall tools headers UAPI: Sync linux/prctl.h with the kernel sources perf metrics: Avoid segv with --topdown for metrics without a group perf lock contention: Add empty 'struct rq' to satisfy libbpf 'runqueue' type verification perf cs-etm: Fix contextid validation perf arm64: Fix build with refcount checking perf test: Add stat test for record and script perf script: Skip aggregation for stat events perf build: Add system include paths to BPF builds perf bpf skels: Make vmlinux.h use bpf.h and perf_event.h in source directory perf parse-events: Do not break up AUX event group perf test test_intel_pt.sh: Test sample mode with event with PMU name perf evsel: Modify group pmu name for software events ...
2023-05-21Merge tag 'powerpc-6.4-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix broken soft dirty tracking when using the Radix MMU (>= P9) - Fix ISA mapping when "ranges" property is not present, for PASemi Nemo boards - Fix a possible WARN_ON_ONCE hitting in BPF extable handling - Fix incorrect DMA address handling when using 2MB TCEs - Fix a bug in IOMMU table handling for SR-IOV devices - Fix the recent rework of IOMMU handling which left arch code calling clean up routines that are handled by the IOMMU core - A few assorted build fixes Thanks to Christian Zigotzky, Dan Horák, Gaurav Batra, Hari Bathini, Jason Gunthorpe, Nathan Chancellor, Naveen N. Rao, Nicholas Piggin, Pali Rohár, Randy Dunlap, and Rob Herring. * tag 'powerpc-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/iommu: Incorrect DDW Table is referenced for SR-IOV device powerpc/iommu: DMA address offset is incorrectly calculated with 2MB TCEs powerpc/iommu: Remove iommu_del_device() powerpc/crypto: Fix aes-gcm-p10 build when VSX=n powerpc/bpf: populate extable entries only during the last pass powerpc/boot: Disable power10 features after BOOTAFLAGS assignment powerpc/64s/radix: Fix soft dirty tracking powerpc/fsl_uli1575: fix kconfig warnings and build errors powerpc/isa-bridge: Fix ISA mapping when "ranges" is not present
2023-05-21Merge tag 'ata-6.4-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata fix from Damien Le Moal: - Fix DT binding for the ahci-ceva driver to fully describe all iommus, from Michal * tag 'ata-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: dt-bindings: ata: ahci-ceva: Cover all 4 iommus entries
2023-05-21Merge tag 'fbdev-for-6.4-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes from Helge Deller: "A few small unspectacular fbdev fixes: - Fix for USB endpoint check in udlfb (found by syzbot fuzzer) - Small fix in error code path in omapfb - compiler warning fixes in fbmem & i810 - code removal and whitespace cleanups in stifb and atyfb" * tag 'fbdev-for-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: stifb: Whitespace cleanups fbdev: udlfb: Use usb_control_msg_send() fbdev: udlfb: Fix endpoint check fbdev: atyfb: Remove unused clock determination fbdev: i810: include i810_main.h in i810_dvt.c fbdev: fbmem: mark get_fb_unmapped_area() static fbdev: omapfb: panel-tpo-td043mtea1: fix error code in probe()
2023-05-21Merge tag '6.4-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull ksmbd server fixes from Steve French: - two fixes for incorrect SMB3 message validation (one for client which uses 8 byte padding, and one for empty bcc) - two fixes for out of bounds bugs: one for username offset checks (in session setup) and the other for create context name length checks in open requests * tag '6.4-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: smb2: Allow messages padded to 8byte boundary ksmbd: allocate one more byte for implied bcc[0] ksmbd: fix wrong UserName check in session_user ksmbd: fix global-out-of-bounds in smb2_find_context_vals
2023-05-21Merge tag '6.4-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs client fixes from Steve French: "Two smb3 client fixes, both related to deferred close, and also for stable: - send close for deferred handles before not after lease break response to avoid possible sharing violations - check all opens on an inode (looking for deferred handles) when lease break is returned not just the handle the lease break came in on" * tag '6.4-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: SMB3: drop reference to cfile before sending oplock break SMB3: Close all deferred handles of inode in case of handle lease break
2023-05-21KVM: VMX: add MSR_IA32_TSX_CTRL into msrs_to_saveMingwei Zhang
Add MSR_IA32_TSX_CTRL into msrs_to_save[] to explicitly tell userspace to save/restore the register value during migration. Missing this may cause userspace that relies on KVM ioctl(KVM_GET_MSR_INDEX_LIST) fail to port the value to the target VM. In addition, there is no need to add MSR_IA32_TSX_CTRL when ARCH_CAP_TSX_CTRL_MSR is not supported in kvm_get_arch_capabilities(). So add the checking in kvm_probe_msr_to_save(). Fixes: c11f83e0626b ("KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality") Reported-by: Jim Mattson <jmattson@google.com> Signed-off-by: Mingwei Zhang <mizhang@google.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Message-Id: <20230509032348.1153070-1-mizhang@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-21KVM: x86: Don't adjust guest's CPUID.0x12.1 (allowed SGX enclave XFRM)Sean Christopherson
Drop KVM's manipulation of guest's CPUID.0x12.1 ECX and EDX, i.e. the allowed XFRM of SGX enclaves, now that KVM explicitly checks the guest's allowed XCR0 when emulating ECREATE. Note, this could theoretically break a setup where userspace advertises a "bad" XFRM and relies on KVM to provide a sane CPUID model, but QEMU is the only known user of KVM SGX, and QEMU explicitly sets the SGX CPUID XFRM subleaf based on the guest's XCR0. Reviewed-by: Kai Huang <kai.huang@intel.com> Tested-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230503160838.3412617-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-21KVM: VMX: Don't rely _only_ on CPUID to enforce XCR0 restrictions for ECREATESean Christopherson
Explicitly check the vCPU's supported XCR0 when determining whether or not the XFRM for ECREATE is valid. Checking CPUID works because KVM updates guest CPUID.0x12.1 to restrict the leaf to a subset of the guest's allowed XCR0, but that is rather subtle and KVM should not modify guest CPUID except for modeling true runtime behavior (allowed XFRM is most definitely not "runtime" behavior). Reviewed-by: Kai Huang <kai.huang@intel.com> Tested-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230503160838.3412617-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-20fbdev: stifb: Whitespace cleanupsHelge Deller
Missed whitespace cleanups in stifb. Fixes: 8000425739dc ("fbdev: stifb: Remove trailing whitespaces") Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-20fbdev: udlfb: Use usb_control_msg_send()Helge Deller
Use the newly introduced usb_control_msg_send() instead of usb_control_msg() when selecting the channel. Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-20Merge tag 'tty-6.4-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.4-rc3 to resolve some reported problems, and add some new device ids. These include: - termios documentation updates - vc_screen use-after-free fix - memory leak fix in arc_uart driver - new 8250 driver ids - other small serial driver fixes All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF serial: qcom-geni: fix enabling deactivated interrupt serial: 8250_bcm7271: fix leak in `brcmuart_probe` serial: 8250_bcm7271: balance clk_enable calls serial: arc_uart: fix of_iomap leak in `arc_serial_probe` serial: 8250: Document termios parameter of serial8250_em485_config() serial: Add support for Advantech PCI-1611U card serial: 8250_exar: Add support for USR298x PCI Modems
2023-05-20Merge tag 'usb-6.4-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt fixes from Greg KH: "Here are some USB fixes for 6.4-rc3, as well as a driver core fix that resolves a memory leak that shows up in USB devices easier than other subsystems. Included in here are: - driver core memory leak as reported and tested by syzbot and developers - dwc3 driver fixes for reported problems - xhci driver fixes for reported problems - USB gadget driver reverts to resolve regressions - usbtmc driver fix for syzbot reported problem - thunderbolt driver fixes for reported issues - other small USB fixes All of these, except for the driver core fix, have been in linux-next with no reported problems. The driver core fix was tested and verified to solve the issue by syzbot and the original reporter" * tag 'usb-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: driver core: class: properly reference count class_dev_iter() xhci: Fix incorrect tracking of free space on transfer rings xhci-pci: Only run d3cold avoidance quirk for s2idle usb-storage: fix deadlock when a scsi command timeouts more than once usb: dwc3: fix a test for error in dwc3_core_init() usb: typec: tps6598x: Fix fault at module removal usb: gadget: u_ether: Fix host MAC address case usb: typec: altmodes/displayport: fix pin_assignment_show Revert "usb: gadget: udc: core: Invoke usb_gadget_connect only when started" Revert "usb: gadget: udc: core: Prevent redundant calls to pullup" usb: gadget: drop superfluous ':' in doc string usb: dwc3: debugfs: Resume dwc3 before accessing registers USB: UHCI: adjust zhaoxin UHCI controllers OverCurrent bit value usb: dwc3: fix gadget mode suspend interrupt handler issue usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume() USB: usbtmc: Fix direction for 0-length ioctl control messages thunderbolt: Clear registers properly when auto clear isn't in use
2023-05-20Merge tag 'block-6.4-2023-05-20' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request via Keith: - More device quirks (Sagi, Hristo, Adrian, Daniel) - Controller delete race (Maurizo) - Multipath cleanup fix (Christoph) - Deny writeable mmap mapping on a readonly block device (Loic) - Kill unused define that got introduced by accident (Christoph) - Error handling fix for s390 dasd (Stefan) - ublk locking fix (Ming) * tag 'block-6.4-2023-05-20' of git://git.kernel.dk/linux: block: remove NFL4_UFLG_MASK block: Deny writable memory mapping if block is read-only s390/dasd: fix command reject error on ESE devices nvme-pci: Add quirk for Teamgroup MP33 SSD ublk: fix AB-BA lockdep warning nvme: do not let the user delete a ctrl before a complete initialization nvme-multipath: don't call blk_mark_disk_dead in nvme_mpath_remove_disk nvme-pci: clamp max_hw_sectors based on DMA optimized limitation nvme-pci: add quirk for missing secondary temperature thresholds nvme-pci: add NVME_QUIRK_BOGUS_NID for HS-SSD-FUTURE 2048G
2023-05-20block: remove NFL4_UFLG_MASKChristoph Hellwig
The NFL4_UFLG_MASK define slipped in in commit 9208d4149758 ("block: add a ->get_unique_id method") and should never have been added, as NFSD as the only user of it already has it's copy. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230520090010.527046-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-05-19Merge tag 'for-net-2023-05-19' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix compiler warnings on btnxpuart - Fix potential double free on hci_conn_unlink - Fix UAF on hci_conn_hash_flush * tag 'for-net-2023-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: btnxpuart: Fix compiler warnings Bluetooth: Unlink CISes when LE disconnects in hci_conn_del Bluetooth: Fix UAF in hci_conn_hash_flush again Bluetooth: Refcnt drop must be placed last in hci_conn_unlink Bluetooth: Fix potential double free caused by hci_conn_unlink ==================== Link: https://lore.kernel.org/r/20230519233056.2024340-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 16:10:24 +0000