summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-21hwmon (it87): Fix voltage scaling for chips with 10.9mV ADCsFrank Crawford
Fix voltage scaling for chips that have 10.9mV ADCs, where scaling was not performed. Fixes: ead8080351c9 ("hwmon: (it87) Add support for IT8732F") Signed-off-by: Frank Crawford <frank@crawford.emu.id.au> Link: https://lore.kernel.org/r/20230318080543.1226700-2-frank@crawford.emu.id.au [groeck: Update subject and description to focus on bug fix] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-03-22Merge tag 'drm-habanalabs-next-2023-03-20' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next This tag contains habanalabs driver and accel changes for v6.4: - uAPI changes: - Add opcodes to the CS ioctl to allow user to stall/resume specific engines inside Gaudi2. This is to allow the user to perform power testing/measurements when training different topologies. - Expose in the INFO ioctl the amount of device memory that the driver and f/w reserve for themselves. - Expose in the INFO ioctl a bit-mask of the available rotator engines in Gaudi2. This is to align with other engines that are already exposed. - Expose in the INFO ioctl the register's address of the f/w that should be used to trigger interrupts from within the user's code running in the compute engines. - Add a critical-event bit in the eventfd bitmask so the user will know the event that was received was critical, and a reset will now occur - Expose in the INFO ioctl two new opcodes to fetch information on h/w and f/w events. The events recorded are the events that were reported in the eventfd. - New features and improvements: - Add a dedicated interrupt ID in MSI-X in the device to the notification of an unexpected user-related event in Gaudi2. Handle it in the driver by reporting this event. - Allow the user to fetch the device memory current usage even when the device is undergoing compute-reset (a reset type that only clears the compute engines). - Enable graceful reset mechanism for compute-reset. This will give the user a few seconds before the device is reset. For example, the user can, during that time, perform certain device operations (dump data for debug) or close the device in an orderly fashion. - Align the decoder with the rest of the engines in regard to notification to the user about interrupts and in regard to performing graceful reset when needed (instead of immediate reset). - Add support for assert interrupt from the TPC engine. - Get the reset type that is necessary to perform per event from the auto-generated irq_map array. - Print the specific reason why a device is still in use when notifying to the user about it (after the user closed the device's FD). - Move to threaded IRQ when handling interrupts of workload completions. - Firmware related fixes: - Fix RAZWI event handler to match newest f/w version. - Read error cause register in dma core events because the f/w doesn't do that. - Increase maximum time to wait for completion of Gaudi2 reset due to f/w bug. - Align to the latest firmware specs. - Enforce the release order of the compute device and dma-buf. i.e increment the device file refcount for any dma-buf that was exported for that device. This will make sure the compute device release function won't be called until the user closes all the FDs of the relevant dma-bufs. Without this change, closing the device's FD before/without closing the dma-buf's FD would always lead to hard-reset of the device. - Fix a link in the drm documentation to correctly point to the accel section. - Compilation warnings cleanups - Misc bug fixes and code cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmQYfcAACgkQZR1NuKta # 54DB4Af/SuiHZkVXwr+yHPv9El726rz9ZQD7mQtzNmehWGonwAvz15yqocNMUSbF # JbqE/vrZjvbXrP1Uv5UrlRVdnFHSPV18VnHU4BMS/WOm19SsR6vZ0QOXOoa6/AUb # w+kF3D//DbFI4/mTGfpH5/pzwu51ti8aVktosPFlHIa8iI8CB4/4IV+ivQ8UW4oK # HyDRkIvHdRmER7vGOfhwhsr4zdqSlJBYrv3C3Z1dkSYBPW/5ICbiM1UlKycwdYKI # cajQBSdUQwUCWnI+i8RmSy3kjNO6OE4XRUvTv89F2bQeyK/1rJLG2m2xZR/Ml/o5 # 7Cgvbn0hWZyeqe7OObYiBlSOBSehCA== # =wclm # -----END PGP SIGNATURE----- # gpg: Signature made Tue 21 Mar 2023 01:37:36 AEST # gpg: using RSA key ED311BA00042EF52DCB412C5651D4DB8AB5AE780 # gpg: Can't check signature: No public key From: Oded Gabbay <ogabbay@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230320154026.GA766126@ogabbay-vm-u20.habana-labs.com
2023-03-21net: dsa: tag_brcm: legacy: fix daisy-chained switchesÁlvaro Fernández Rojas
When BCM63xx internal switches are connected to switches with a 4-byte Broadcom tag, it does not identify the packet as VLAN tagged, so it adds one based on its PVID (which is likely 0). Right now, the packet is received by the BCM63xx internal switch and the 6-byte tag is properly processed. The next step would to decode the corresponding 4-byte tag. However, the internal switch adds an invalid VLAN tag after the 6-byte tag and the 4-byte tag handling fails. In order to fix this we need to remove the invalid VLAN tag after the 6-byte tag before passing it to the 4-byte tag decoding. Fixes: 964dbf186eaa ("net: dsa: tag_brcm: add support for legacy tags") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230319095540.239064-1-noltari@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-22Merge tag 'drm-intel-gt-next-2023-03-16' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: - Fix issue #6333: "list_add corruption" and full system lockup from performance monitoring (Janusz) - Give the punit time to settle before fatally failing (Aravind, Chris) - Don't use stolen memory or BAR for ring buffers on LLC platforms (John) - Add missing ecodes and correct timeline seqno on GuC error captures (John) - Make sure DSM size has correct 1MiB granularity on Gen12+ (Nirmoy, Lucas) - Fix potential SSEU max_subslices array-index-out-of-bounds access on Gen11 (Andrea) - Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+ (Matt R.) - Apply Wa_1408615072/Wa_1407596294 correctly on Gen11 (Matt R) - Apply LNCF/LBCF workarounds correctly on XeHP SDV/PVC/DG2 (Matt R) - Implement Wa_1606376872 for Xe_LP (Gustavo) - Consider GSI offset when doing MCR lookups on Meteorlake+ (Matt R.) - Add engine TLB invalidation for Meteorlake (Matt R.) - Fix GSC Driver-FLR completion on Meteorlake (Alan) - Fix GSC races on driver load/unload on Meteorlake+ (Daniele) - Disable MC6 for MTL A step (Badal) - Consolidate TLB invalidation flow (Tvrtko) - Improve debug GuC/HuC debug messages (Michal Wa., John) - Move fd_install after last use of fence (Rob) - Initialize the obj flags for shmem objects (Aravind) - Fix missing debug object activation (Nirmoy) - Probe lmem before the stolen portion (Matt A) - Improve clean up of GuC busyness stats worker (John) - Fix missing return code checks in GuC submission init (John) - Annotate two more workaround/tuning registers as MCR on PVC (Matt R) - Fix GEN8_MISCCPCTL definition and remove unused INF_UNIT_LEVEL_CLKGATE (Lucas) - Use sysfs_emit() and sysfs_emit_at() (Nirmoy) - Make kobj_type structures constant (Thomas W.) - make kobj attributes const on gt/ (Jani) - Remove the unused virtualized start hack on buddy allocator (Matt A) - Remove redundant check for DG1 (Lucas) - Move DG2 tuning to the right function (Lucas) - Rename dev_priv to i915 for private data naming consistency in gt/ (Andi) - Remove unnecessary whitelisting of CS_CTX_TIMESTAMP on Xe_HP platforms (Matt R.) - - Escape wildcard in method names in kerneldoc (Bagas) - Selftest improvements (Chris, Jonathan, Tvrtko, Anshuman, Tejas) - Fix sparse warnings (Jani) [airlied: fix unused variable in intel_workarounds] Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZBMSb42yjjzczRhj@jlahtine-mobl.ger.corp.intel.com
2023-03-21riscv: mm: Fix incorrect ASID argument when flushing TLBDylan Jhong
Currently, we pass the CONTEXTID instead of the ASID to the TLB flush function. We should only take the ASID field to prevent from touching the reserved bit field. Fixes: 3f1e782998cd ("riscv: add ASID-based tlbflushing methods") Signed-off-by: Dylan Jhong <dylan@andestech.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com> Link: https://lore.kernel.org/r/20230313034906.2401730-1-dylan@andestech.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-21Merge tag 'vfio-v6.3-rc4' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fix from Alex Williamson: - Fix dirty size reporting for pre-copy in mlx5 variant driver (Yishai Hadas) * tag 'vfio-v6.3-rc4' of https://github.com/awilliam/linux-vfio: vfio/mlx5: Fix the report of dirty_bytes upon pre-copy
2023-03-21Merge tag 'nfsd-6.3-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Fix a crash during NFS READs from certain client implementations - Address a minor kbuild regression in v6.3 * tag 'nfsd-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: don't replace page in rq_pages if it's a continuation of last page NFS & NFSD: Update GSS dependencies
2023-03-21drm/lima: Use drm_sched_job_add_syncobj_dependency()Maíra Canal
As lima_gem_add_deps() performs the same steps as drm_sched_job_add_syncobj_dependency(), replace the open-coded implementation in Lima in order to simply use the DRM function. Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Qiang Yu <yuq825@gmail.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230224214133.411966-1-mcanal@igalia.com
2023-03-21net/mlx5: E-Switch, Fix an Oops in error handling codeDan Carpenter
The error handling dereferences "vport". There is nothing we can do if it is an error pointer except returning the error code. Fixes: 133dcfc577ea ("net/mlx5: E-Switch, Alloc and free unique metadata for match") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-03-21net/mlx5: Read the TC mapping of all priorities on ETS queryMaher Sanalla
When ETS configurations are queried by the user to get the mapping assignment between packet priority and traffic class, only priorities up to maximum TCs are queried from QTCT register in FW to retrieve their assigned TC, leaving the rest of the priorities mapped to the default TC #0 which might be misleading. Fix by querying the TC mapping of all priorities on each ETS query, regardless of the maximum number of TCs configured in FW. Fixes: 820c2c5e773d ("net/mlx5e: Read ETS settings directly from firmware") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-03-21net/mlx5e: Overcome slow response for first macsec ASO WQEEmeel Hakim
First ASO WQE poll causes a cache miss in hardware hence the resut is delayed. It causes to the situation where such WQE is polled earlier than it is needed. Add logic to retry ASO CQ polling operation. Fixes: 739cfa34518e ("net/mlx5: Make ASO poll CQ usable in atomic context")  Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-03-21net/mlx5e: Initialize link speed to zeroRoy Novich
mlx5e_port_max_linkspeed does not guarantee value assignment for speed. Avoid cases where link_speed might be used uninitialized. In case mlx5e_port_max_linkspeed fails, a default link speed of 50000 will be used for the calculations. Fixes: 3f6d08d196b2 ("net/mlx5e: Add RSS support for hairpin") Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-03-21net/mlx5: Fix steering rules cleanupLama Kayal
vport's mc, uc and multicast rules are not deleted in teardown path when EEH happens. Since the vport's promisc settings(uc, mc and all) in firmware are reset after EEH, mlx5 driver will try to delete the above rules in the initialization path. This cause kernel crash because these software rules are no longer valid. Fix by nullifying these rules right after delete to avoid accessing any dangling pointers. Call Trace: __list_del_entry_valid+0xcc/0x100 (unreliable) tree_put_node+0xf4/0x1b0 [mlx5_core] tree_remove_node+0x30/0x70 [mlx5_core] mlx5_del_flow_rules+0x14c/0x1f0 [mlx5_core] esw_apply_vport_rx_mode+0x10c/0x200 [mlx5_core] esw_update_vport_rx_mode+0xb4/0x180 [mlx5_core] esw_vport_change_handle_locked+0x1ec/0x230 [mlx5_core] esw_enable_vport+0x130/0x260 [mlx5_core] mlx5_eswitch_enable_sriov+0x2a0/0x2f0 [mlx5_core] mlx5_device_enable_sriov+0x74/0x440 [mlx5_core] mlx5_load_one+0x114c/0x1550 [mlx5_core] mlx5_pci_resume+0x68/0xf0 [mlx5_core] eeh_report_resume+0x1a4/0x230 eeh_pe_dev_traverse+0x98/0x170 eeh_handle_normal_event+0x3e4/0x640 eeh_handle_event+0x4c/0x370 eeh_event_handler+0x14c/0x210 kthread+0x168/0x1b0 ret_from_kernel_thread+0x5c/0x84 Fixes: a35f71f27a61 ("net/mlx5: E-Switch, Implement promiscuous rx modes vf request handling") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Lama Kayal <lkayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-03-21net/mlx5e: Block entering switchdev mode with ns inconsistencyGavin Li
Upon entering switchdev mode, VF/SF representors are spawned in the devlink instance's net namespace, whereas the PF net device transforms into the uplink representor, remaining in the net namespace the PF net device was in. Therefore, if a PF net device's namespace is different from its parent devlink net namespace, entering switchdev mode can create an illegal situation where all representors sharing the same core device are NOT in the same net namespace. To avoid this issue, block entering switchdev mode for devices whose child netdev net namespace has diverged from the parent devlink's. Fixes: 7768d1971de6 ("net/mlx5: E-Switch, Add control for encapsulation") Signed-off-by: Gavin Li <gavinl@nvidia.com> Reviewed-by: Gavi Teitz <gavi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-03-21net/mlx5e: Set uplink rep as NETNS_LOCALGavin Li
Previously, NETNS_LOCAL was not set for uplink representors, inconsistent with VF representors, and allowed the uplink representor to be moved between net namespaces and separated from the VF representors it shares the core device with. Such usage would break the isolation model of namespaces, as devices in different namespaces would have access to shared memory. To solve this issue, set NETNS_LOCAL for uplink representors if eswitch is in switchdev mode. Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode") Signed-off-by: Gavin Li <gavinl@nvidia.com> Reviewed-by: Gavi Teitz <gavi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-03-21bpf: Adjust insufficient default bpf_jit_limitDaniel Borkmann
We've seen recent AWS EKS (Kubernetes) user reports like the following: After upgrading EKS nodes from v20230203 to v20230217 on our 1.24 EKS clusters after a few days a number of the nodes have containers stuck in ContainerCreating state or liveness/readiness probes reporting the following error: Readiness probe errored: rpc error: code = Unknown desc = failed to exec in container: failed to start exec "4a11039f730203ffc003b7[...]": OCI runtime exec failed: exec failed: unable to start container process: unable to init seccomp: error loading seccomp filter into kernel: error loading seccomp filter: errno 524: unknown However, we had not been seeing this issue on previous AMIs and it only started to occur on v20230217 (following the upgrade from kernel 5.4 to 5.10) with no other changes to the underlying cluster or workloads. We tried the suggestions from that issue (sysctl net.core.bpf_jit_limit=452534528) which helped to immediately allow containers to be created and probes to execute but after approximately a day the issue returned and the value returned by cat /proc/vmallocinfo | grep bpf_jit | awk '{s+=$2} END {print s}' was steadily increasing. I tested bpf tree to observe bpf_jit_charge_modmem, bpf_jit_uncharge_modmem their sizes passed in as well as bpf_jit_current under tcpdump BPF filter, seccomp BPF and native (e)BPF programs, and the behavior all looks sane and expected, that is nothing "leaking" from an upstream perspective. The bpf_jit_limit knob was originally added in order to avoid a situation where unprivileged applications loading BPF programs (e.g. seccomp BPF policies) consuming all the module memory space via BPF JIT such that loading of kernel modules would be prevented. The default limit was defined back in 2018 and while good enough back then, we are generally seeing far more BPF consumers today. Adjust the limit for the BPF JIT pool from originally 1/4 to now 1/2 of the module memory space to better reflect today's needs and avoid more users running into potentially hard to debug issues. Fixes: fdadd04931c2 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K") Reported-by: Stephen Haynes <sh@synk.net> Reported-by: Lefteris Alexakis <lefteris.alexakis@kpn.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://github.com/awslabs/amazon-eks-ami/issues/1179 Link: https://github.com/awslabs/amazon-eks-ami/issues/1219 Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230320143725.8394-1-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-22Merge tag 'drm-misc-next-2023-03-16' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.4-rc1: Cross-subsystem Changes: - Add drm_bridge.h to drm_bridge maintainers. Core Changes: - Assorted fixes to TTM, tests, format-helper, accel. - Assorted Makefile fixes to drivers and accel. - Implement fbdev emulation for GEM DMA drivers, and convert a lot of drivers to use it. - Use tgid instead of pid for tracking clients. Driver Changes: - Assorted fixes in rockchip, vmwgfx, nouveau, cirrus. - Add imx25 driver. - Add Elida KD50T048A, Sony TD4353, Novatek NT36523, STARRY 2081101QFH032011-53G panels. - Add 4K mode support to rockchip. - Convert cirrus to use regular atomic helpers, and more cirrus improvements. - Add damage clipping to cirrus, virtio. [airlied: add drm_bridge.h include to imx] Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f7b765c7-d49d-edb5-2a6a-4f7a7be16a59@linux.intel.com
2023-03-21Merge tag 'keys-fixes-20230321' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyrings fixes from David Howells: - Fix request_key() so that it doesn't cache a looked up key on the current thread if that thread is a kernel thread. The cache is cleared during notify_resume - but that doesn't happen in kernel threads. This is causing cifs DNS keys to be un-invalidateable. - Fix a wrapper check in verify_pefile() to not round up the length. - Change asymmetric_keys code to log errors to make it easier for users to work out why failures occurred. * tag 'keys-fixes-20230321' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: asymmetric_keys: log on fatal failures in PE/pkcs7 verify_pefile: relax wrapper length check keys: Do not cache key in task struct if key is requested from kernel thread
2023-03-21i40e: fix flow director packet filter programmingRadoslaw Tyl
Initialize to zero structures to build a valid Tx Packet used for the filter programming. Fixes: a9219b332f52 ("i40e: VLAN field for flow director") Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-21iavf: fix hang on reboot with iceStefan Assmann
When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] #13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] #14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 #15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 #16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 #17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 #18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 #19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc #20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d #21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 #22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown(). Fixes: 974578017fc1 ("iavf: Add waiting so the port is initialized in remove") Fixes: a8417330f8a5 ("iavf: Fix race condition between iavf_shutdown and iavf_remove") Reported-by: Marius Cornea <mcornea@redhat.com> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-21ice: remove filters only if VSI is deletedMichal Swiatkowski
Filters shouldn't be removed in VSI rebuild path. Removing them on PF VSI results in no rule for PF MAC after changing for example queues amount. Remove all filters only in the VSI remove flow. As unload should also cause the filter to be removed introduce, a new function ice_stop_eth(). It will unroll ice_start_eth(), so remove filters and close VSI. Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-21ice: check if VF exists before mode checkMichal Swiatkowski
Setting trust on VF should return EINVAL when there is no VF. Move checking for switchdev mode after checking if VF exists. Fixes: c54d209c78b8 ("ice: Wait for VF to be reset/ready before configuration") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Kalyan Kodamagula <kalyan.kodamagula@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-21ice: fix rx buffers handling for flow director packetsPiotr Raczynski
Adding flow director filters stopped working correctly after commit 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side"). As a result, only first flow director filter can be added, adding next filter leads to NULL pointer dereference attached below. Rx buffer handling and reallocation logic has been optimized, however flow director specific traffic was not accounted for. As a result driver handled those packets incorrectly since new logic was based on ice_rx_ring::first_desc which was not set in this case. Fix this by setting struct ice_rx_ring::first_desc to next_to_clean for flow director received packets. [ 438.544867] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 438.551840] #PF: supervisor read access in kernel mode [ 438.556978] #PF: error_code(0x0000) - not-present page [ 438.562115] PGD 7c953b2067 P4D 0 [ 438.565436] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 438.569794] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 6.2.0-net-bug #1 [ 438.577531] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [ 438.588470] RIP: 0010:ice_clean_rx_irq+0x2b9/0xf20 [ice] [ 438.593860] Code: 45 89 f7 e9 ac 00 00 00 8b 4d 78 41 31 4e 10 41 09 d5 4d 85 f6 0f 84 82 00 00 00 49 8b 4e 08 41 8b 76 1c 65 8b 3d 47 36 4a 3f <48> 8b 11 48 c1 ea 36 39 d7 0f 85 a6 00 00 00 f6 41 08 02 0f 85 9c [ 438.612605] RSP: 0018:ff8c732640003ec8 EFLAGS: 00010082 [ 438.617831] RAX: 0000000000000800 RBX: 00000000000007ff RCX: 0000000000000000 [ 438.624957] RDX: 0000000000000800 RSI: 0000000000000000 RDI: 0000000000000000 [ 438.632089] RBP: ff4ed275a2158200 R08: 00000000ffffffff R09: 0000000000000020 [ 438.639222] R10: 0000000000000000 R11: 0000000000000020 R12: 0000000000001000 [ 438.646356] R13: 0000000000000000 R14: ff4ed275d0daffe0 R15: 0000000000000000 [ 438.653485] FS: 0000000000000000(0000) GS:ff4ed2738fa00000(0000) knlGS:0000000000000000 [ 438.661563] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 438.667310] CR2: 0000000000000000 CR3: 0000007c9f0d6006 CR4: 0000000000771ef0 [ 438.674444] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 438.681573] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 438.688697] PKRU: 55555554 [ 438.691404] Call Trace: [ 438.693857] <IRQ> [ 438.695877] ? profile_tick+0x17/0x80 [ 438.699542] ice_msix_clean_ctrl_vsi+0x24/0x50 [ice] [ 438.702571] ice 0000:b1:00.0: VF 1: ctrl_vsi irq timeout [ 438.704542] __handle_irq_event_percpu+0x43/0x1a0 [ 438.704549] handle_irq_event+0x34/0x70 [ 438.704554] handle_edge_irq+0x9f/0x240 [ 438.709901] iavf 0000:b1:01.1: Failed to add Flow Director filter with status: 6 [ 438.714571] __common_interrupt+0x63/0x100 [ 438.714580] common_interrupt+0xb4/0xd0 [ 438.718424] iavf 0000:b1:01.1: Rule ID: 127 dst_ip: 0.0.0.0 src_ip 0.0.0.0 UDP: dst_port 4 src_port 0 [ 438.722255] </IRQ> [ 438.722257] <TASK> [ 438.722257] asm_common_interrupt+0x22/0x40 [ 438.722262] RIP: 0010:cpuidle_enter_state+0xc8/0x430 [ 438.722267] Code: 6e e9 25 ff e8 f9 ef ff ff 8b 53 04 49 89 c5 0f 1f 44 00 00 31 ff e8 d7 f1 24 ff 45 84 ff 0f 85 57 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 85 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 438.722269] RSP: 0018:ffffffff86003e50 EFLAGS: 00000246 [ 438.784108] RAX: ff4ed2738fa00000 RBX: ffbe72a64fc01020 RCX: 0000000000000000 [ 438.791234] RDX: 0000000000000000 RSI: ffffffff858d84de RDI: ffffffff85893641 [ 438.798365] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000003158af9d [ 438.805490] R10: 0000000000000008 R11: 0000000000000354 R12: ffffffff862365a0 [ 438.812622] R13: 000000661b472a87 R14: 0000000000000002 R15: 0000000000000000 [ 438.819757] cpuidle_enter+0x29/0x40 [ 438.823333] do_idle+0x1b6/0x230 [ 438.826566] cpu_startup_entry+0x19/0x20 [ 438.830492] rest_init+0xcb/0xd0 [ 438.833717] arch_call_rest_init+0xa/0x30 [ 438.837731] start_kernel+0x776/0xb70 [ 438.841396] secondary_startup_64_no_verify+0xe5/0xeb [ 438.846449] </TASK> Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-21asymmetric_keys: log on fatal failures in PE/pkcs7Robbie Harwood
These particular errors can be encountered while trying to kexec when secureboot lockdown is in place. Without this change, even with a signed debug build, one still needs to reboot the machine to add the appropriate dyndbg parameters (since lockdown blocks debugfs). Accordingly, upgrade all pr_debug() before fatal error into pr_warn(). Signed-off-by: Robbie Harwood <rharwood@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Jarkko Sakkinen <jarkko@kernel.org> cc: Eric Biederman <ebiederm@xmission.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: keyrings@vger.kernel.org cc: linux-crypto@vger.kernel.org cc: kexec@lists.infradead.org Link: https://lore.kernel.org/r/20230220171254.592347-3-rharwood@redhat.com/ # v2
2023-03-21verify_pefile: relax wrapper length checkRobbie Harwood
The PE Format Specification (section "The Attribute Certificate Table (Image Only)") states that `dwLength` is to be rounded up to 8-byte alignment when used for traversal. Therefore, the field is not required to be an 8-byte multiple in the first place. Accordingly, pesign has not performed this alignment since version 0.110. This causes kexec failure on pesign'd binaries with "PEFILE: Signature wrapper len wrong". Update the comment and relax the check. Signed-off-by: Robbie Harwood <rharwood@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Jarkko Sakkinen <jarkko@kernel.org> cc: Eric Biederman <ebiederm@xmission.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: keyrings@vger.kernel.org cc: linux-crypto@vger.kernel.org cc: kexec@lists.infradead.org Link: https://learn.microsoft.com/en-us/windows/win32/debug/pe-format#the-attribute-certificate-table-image-only Link: https://github.com/rhboot/pesign Link: https://lore.kernel.org/r/20230220171254.592347-2-rharwood@redhat.com/ # v2
2023-03-21keys: Do not cache key in task struct if key is requested from kernel threadDavid Howells
The key which gets cached in task structure from a kernel thread does not get invalidated even after expiry. Due to which, a new key request from kernel thread will be served with the cached key if it's present in task struct irrespective of the key validity. The change is to not cache key in task_struct when key requested from kernel thread so that kernel thread gets a valid key on every key request. The problem has been seen with the cifs module doing DNS lookups from a kernel thread and the results getting pinned by being attached to that kernel thread's cache - and thus not something that can be easily got rid of. The cache would ordinarily be cleared by notify-resume, but kernel threads don't do that. This isn't seen with AFS because AFS is doing request_key() within the kernel half of a user thread - which will do notify-resume. Fixes: 7743c48e54ee ("keys: Cache result of request_key*() temporarily in task_struct") Signed-off-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Steve French <smfrench@gmail.com> cc: keyrings@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/CAGypqWw951d=zYRbdgNR4snUDvJhWL=q3=WOyh7HhSJupjz2vA@mail.gmail.com/
2023-03-21drm/i915: Disable DC states for all commitsVille Syrjälä
Keeping DC states enabled is incompatible with the _noarm()/_arm() split we use for writing pipe/plane registers. When DC5 and PSR are enabled, all pipe/plane registers effectively become self-arming on account of DC5 exit arming the update, and PSR exit latching it. What probably saves us most of the time is that (with PIPE_MISC[21]=0) all pipe register writes themselves trigger PSR exit, and then we don't re-enter PSR until the idle frame count has elapsed. So it may be that the PSR exit happens already before we've updated the state too much. Also the PSR1 panel (at least on this KBL) seems to discard the first frame we trasmit, presumably still scanning out from its internal framebuffer at that point. So only the second frame we transmit is actually visible. But I suppose that could also be panel specific behaviour. I haven't checked out how other PSR panels behave, nor did I bother to check what the eDP spec has to say about this. And since this really is all about DC states, let's switch from the MODESET domain to the DC_OFF domain. Functionally they are 100% identical. We should probably remove the MODESET domain... And for good measure let's toss in an assert to the place where we do the _noarm() register writes to make sure DC states are in fact off. v2: Just use intel_display_power_is_enabled() (Imre) Cc: <stable@vger.kernel.org> #v5.17+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair") Fixes: f8a005eb8972 ("drm/i915: Optimize icl+ universal plane programming") Fixes: 890b6ec4a522 ("drm/i915: Split skl+ plane update into noarm+arm pair") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320183532.17727-1-ville.syrjala@linux.intel.com
2023-03-21drm/i915: Workaround ICL CSC_MODE sticky armingVille Syrjälä
Unlike SKL/GLK the ICL CSC unit suffers from a new issue where CSC_MODE arming is sticky. That is, once armed it remains armed causing the CSC coeff/offset registers to become effectively self-arming. CSC coeff/offset registers writes no longer disarm the CSC, but fortunately register read still do. So we can use that to disarm the CSC unit once the registers for the current frame have been latched. This avoid s the self-arming behaviour from persisting into the next frame's .color_commit_noarm() call. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-5-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2023-03-21drm/i915: Add a .color_post_update() hookVille Syrjälä
We're going to need stuff after the color management register latching has happened. Add a corresponding hook. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-4-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2023-03-21drm/i915: Move CSC load back into .color_commit_arm() when PSR is enabled on ↵Ville Syrjälä
skl/glk SKL/GLK CSC unit suffers from a nasty issue where a CSC coeff/offset register read or write between DC5 exit and PSR exit will undo the CSC arming performed by DMC, and then during PSR exit the hardware will latch zeroes into the active CSC registers. This causes any plane going through the CSC to output all black. We can sidestep the issue by making sure the PSR exit has already actually happened before we touch the CSC coeff/offset registers. Easiest way to guarantee that is to just move the CSC programming back into the .color_commir_arm() as we force a PSR exit (and crucially wait for it to actually happen) prior to touching the arming registers. When PSR (and thus also DC states) are disabled we don't have anything to worry about, so we can keep using the more optional _noarm() hook for writing the CSC registers. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8283 Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-3-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2023-03-21drm/i915: Split icl_color_commit_noarm() from skl_color_commit_noarm()Ville Syrjälä
We're going to want different behavior for skl/glk vs. icl in .color_commit_noarm(), so split the hook into two. Arguably we already had slightly different behaviour since csc_enable/gamma_enable are never set on icl+, so the old code was perhaps a bit confusing as well. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-2-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2023-03-22bootconfig: Fix testcase to increase max nodeMasami Hiramatsu (Google)
Since commit 6c40624930c5 ("bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support") increased the max number of bootconfig node to 8192, the bootconfig testcase of the max number of nodes fails. To fix this issue, we can not simply increase the number in the test script because the test bootconfig file becomes too big (>32KB). To fix that, we can use a combination of three alphabets (26^3 = 17576). But with that, we can not express the 8193 (just one exceed from the limitation) because it also exceeds the max size of bootconfig. So, the first 26 nodes will just use one alphabet. With this fix, test-bootconfig.sh passes all tests. Link: https://lore.kernel.org/all/167888844790.791176.670805252426835131.stgit@devnote2/ Reported-by: Heinz Wiesinger <pprkut@slackware.com> Link: https://lore.kernel.org/all/2463802.XAFRqVoOGU@amaterasu.liwjatan.org Fixes: 6c40624930c5 ("bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-03-21hwmon: (xgene) Fix ioremap and memremap leakTianyi Jing
Smatch reports: drivers/hwmon/xgene-hwmon.c:757 xgene_hwmon_probe() warn: 'ctx->pcc_comm_addr' from ioremap() not released on line: 757. This is because in drivers/hwmon/xgene-hwmon.c:701 xgene_hwmon_probe(), ioremap and memremap is not released, which may cause a leak. To fix this, ioremap and memremap is modified to devm_ioremap and devm_memremap. Signed-off-by: Tianyi Jing <jingfelix@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230318143851.2191625-1-jingfelix@hust.edu.cn [groeck: Fixed formatting and subject] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-03-21hwmon: fix potential sensor registration fail if of_node is missingPhinex Hung
It is not sufficient to check of_node in current device. In some cases, this would cause the sensor registration to fail. This patch looks for device's ancestors to find a valid of_node if any. Fixes: d560168b5d0f ("hwmon: (core) New hwmon registration API") Signed-off-by: Phinex Hung <phinex@realtek.com> Link: https://lore.kernel.org/r/20230321060224.3819-1-phinex@realtek.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-03-21hwmon: (peci/cputemp) Fix miscalculated DTS for SKXIwona Winiarska
For Skylake, DTS temperature of the CPU is reported in S10.6 format instead of S8.8. Reported-by: Paul Fertser <fercerpav@gmail.com> Link: https://lore.kernel.org/lkml/ZBhHS7v+98NK56is@home.paul.comp/ Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20230321090410.866766-1-iwona.winiarska@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-03-21efi/libstub: zboot: Add compressed image to make targetsArd Biesheuvel
Avoid needlessly rebuilding the compressed image by adding the file 'vmlinuz' to the 'targets' Kbuild make variable. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-03-21i915/display/dp: SDP CRC16 for 128b132b link layerArun R Murthy
Enable SDP error detection configuration, this will set CRC16 in 128b/132b link layer. For Display version 13 a hardware bit31 in register VIDEO_DIP_CTL is added to enable/disable SDP CRC applicable for DP2.0 only, but the default value of this bit will enable CRC16 in 128b/132b hence skipping this write. Corrective actions on SDP corruption is yet to be defined. v2: Moved the CRC enable to link training init(Jani N) v3: Moved crc enable to ddi pre enable <Jani N> v4: Separate function for SDP CRC16 (Jani N) Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230302081532.765821-3-arun.r.murthy@intel.com
2023-03-21drm: Add SDP Error Detection Configuration RegisterArun R Murthy
DP2.0 E11 defines a new register to facilitate SDP error detection by a 128B/132B capable DPRX device. v2: Update the macro name to reflect the DP spec(Harry) Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230302081532.765821-2-arun.r.murthy@intel.com
2023-03-21entry/rcu: Check TIF_RESCHED _after_ delayed RCU wake-upFrederic Weisbecker
RCU sometimes needs to perform a delayed wake up for specific kthreads handling offloaded callbacks (RCU_NOCB). These wakeups are performed by timers and upon entry to idle (also to guest and to user on nohz_full). However the delayed wake-up on kernel exit is actually performed after the thread flags are fetched towards the fast path check for work to do on exit to user. As a result, and if there is no other pending work to do upon that kernel exit, the current task will resume to userspace with TIF_RESCHED set and the pending wake up ignored. Fix this with fetching the thread flags _after_ the delayed RCU-nocb kthread wake-up. Fixes: 47b8ff194c1f ("entry: Explicitly flush pending rcuog wakeup before last rescheduling point") Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230315194349.10798-3-joel@joelfernandes.org
2023-03-21perf/x86/amd/core: Always clear status for idxBreno Leitao
The variable 'status' (which contains the unhandled overflow bits) is not being properly masked in some cases, displaying the following warning: WARNING: CPU: 156 PID: 475601 at arch/x86/events/amd/core.c:972 amd_pmu_v2_handle_irq+0x216/0x270 This seems to be happening because the loop is being continued before the status bit being unset, in case x86_perf_event_set_period() returns 0. This is also causing an inconsistency because the "handled" counter is incremented, but the status bit is not cleaned. Move the bit cleaning together above, together when the "handled" counter is incremented. Fixes: 7685665c390d ("perf/x86/amd/core: Add PerfMonV2 overflow handling") Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Sandipan Das <sandipan.das@amd.com> Link: https://lore.kernel.org/r/20230321113338.1669660-1-leitao@debian.org
2023-03-21sched/fair: Sanitize vruntime of entity being migratedVincent Guittot
Commit 829c1651e9c4 ("sched/fair: sanitize vruntime of entity being placed") fixes an overflowing bug, but ignore a case that se->exec_start is reset after a migration. For fixing this case, we delay the reset of se->exec_start after placing the entity which se->exec_start to detect long sleeping task. In order to take into account a possible divergence between the clock_task of 2 rqs, we increase the threshold to around 104 days. Fixes: 829c1651e9c4 ("sched/fair: sanitize vruntime of entity being placed") Originally-by: Zhang Qiao <zhangqiao22@huawei.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Zhang Qiao <zhangqiao22@huawei.com> Link: https://lore.kernel.org/r/20230317160810.107988-1-vincent.guittot@linaro.org
2023-03-21drm/i915/bios: Rename find_section to find_bdb_sectionMaarten Lankhorst
This prevents a namespace collision on other archs. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230315121924.2314693-1-jani.nikula@intel.com
2023-03-21entry: Fix noinstr warning in __enter_from_user_mode()Josh Poimboeuf
__enter_from_user_mode() is triggering noinstr warnings with CONFIG_DEBUG_PREEMPT due to its call of preempt_count_add() via ct_state(). The preemption disable isn't needed as interrupts are already disabled. And the context_tracking_enabled() check in ct_state() also isn't needed as that's already being done by the CT_WARN_ON(). Just use __ct_state() instead. Fixes the following warnings: vmlinux.o: warning: objtool: enter_from_user_mode+0xba: call to preempt_count_add() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_enter_from_user_mode+0xf9: call to preempt_count_add() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_enter_from_user_mode_prepare+0xc7: call to preempt_count_add() leaves .noinstr.text section vmlinux.o: warning: objtool: irqentry_enter_from_user_mode+0xba: call to preempt_count_add() leaves .noinstr.text section Fixes: 171476775d32 ("context_tracking: Convert state to atomic_t") Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/d8955fa6d68dc955dda19baf13ae014ae27926f5.1677369694.git.jpoimboe@kernel.org
2023-03-21drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Book X90FHans de Goede
Like the Windows Lenovo Yoga Book X91F/L the Android Lenovo Yoga Book X90F/L has a portrait 1200x1920 screen used in landscape mode, add a quirk for this. When the quirk for the X91F/L was initially added it was written to also apply to the X90F/L but this does not work because the Android version of the Yoga Book uses completely different DMI strings. Also adjust the X91F/L quirk to reflect that it only applies to the X91F/L models. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230301095218.28457-1-hdegoede@redhat.com
2023-03-21drm/i915/debugfs: add crtc i915_pipe debugfs fileJani Nikula
The pipe may differ from crtc index if pipes are fused off. For testing purposes, IGT needs to know the pipe. There's already a I915_GET_PIPE_FROM_CRTC_ID IOCTL for this. However, the upcoming Xe driver won't have that IOCTL, and going forward, we'll want a unified interface for testing i915 and Xe, as they share the display code. Thus add the debugfs for i915 display. v2: User letters for pipe names (Ville) Cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320124429.786985-2-jani.nikula@intel.com
2023-03-21drm/i915/debugfs: switch crtc debugfs to struct intel_crtcJani Nikula
Convert the crtc debugfs code to use struct intel_crtc instead of struct drm_crtc. v2: Fix build for CONFIG_DRM_I915_DEBUG_VBLANK_EVADE=y (kernel test robot) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320124429.786985-1-jani.nikula@intel.com
2023-03-21drm/gma500: remove unused gma_pipe_event functionTom Rix
clang with W=1 reports drivers/gpu/drm/gma500/psb_irq.c:35:19: error: unused function 'gma_pipe_event' [-Werror,-Wunused-function] static inline u32 gma_pipe_event(int pipe) ^ This function is not used, so remove it. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230319142320.1704336-1-trix@redhat.com
2023-03-20octeontx2-vf: Add missing free for alloc_percpuJiasheng Jiang
Add the free_percpu for the allocated "vf->hw.lmt_info" in order to avoid memory leak, same as the "pf->hw.lmt_info" in `drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c`. Fixes: 5c0512072f65 ("octeontx2-pf: cn10k: Use runtime allocated LMTLINE region") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Acked-by: Geethasowjanya Akula <gakula@marvell.com> Link: https://lore.kernel.org/r/20230317064337.18198-1-jiasheng@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-20io_uring/net: avoid sending -ECONNABORTED on repeated connection requestsJens Axboe
Since io_uring does nonblocking connect requests, if we do two repeated ones without having a listener, the second will get -ECONNABORTED rather than the expected -ECONNREFUSED. Treat -ECONNABORTED like a normal retry condition if we're nonblocking, if we haven't already seen it. Cc: stable@vger.kernel.org Fixes: 3fb1bd688172 ("io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT") Link: https://github.com/axboe/liburing/issues/828 Reported-by: Hui, Chunyang <sanqian.hcy@antgroup.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-20block/io_uring: pass in issue_flags for uring_cmd task_work handlingJens Axboe
io_uring_cmd_done() currently assumes that the uring_lock is held when invoked, and while it generally is, this is not guaranteed. Pass in the issue_flags associated with it, so that we have IO_URING_F_UNLOCKED available to be able to lock the CQ ring appropriately when completing events. Cc: stable@vger.kernel.org Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd") Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-13 01:07:33 +0000