summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-05mmc: tegra: enable UHS-I modesLucas Stach
Keep the quirk bits, as Tegra30 and Tegra114 host have different levels of support for UHS-I modes and so need different spare bits to be set, but change the logic to be positive. Tegra210 needs a different tuning sequence than Tegra30+. Disable UHS modes until support for this is properly added. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-01-05Bluetooth: Add support for Start Limited Discovery commandJohan Hedberg
This patch implements the mgmt Start Limited Discovery command. Most of existing Start Discovery code is reused since the only difference is the presence of a 'limited' flag as part of the discovery state. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-05Bluetooth: Change eir_has_data_type() to more generic eir_get_data()Johan Hedberg
To make the EIR parsing helper more general purpose, make it return the found data and its length rather than just saying whether the data was present or not. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-05arm64: mm: move pgd_cache initialisation to pgtable_cache_initWill Deacon
Initialising the suppport for EFI runtime services requires us to allocate a pgd off the back of an early_initcall. On systems where the PGD_SIZE is smaller than PAGE_SIZE (e.g. 64k pages and 48-bit VA), the pgd_cache isn't initialised at this stage, and we panic with a NULL dereference during boot: Unable to handle kernel NULL pointer dereference at virtual address 00000000 __create_mapping.isra.5+0x84/0x350 create_pgd_mapping+0x20/0x28 efi_create_mapping+0x5c/0x6c arm_enable_runtime_services+0x154/0x1e4 do_one_initcall+0x8c/0x190 kernel_init_freeable+0x84/0x1ec kernel_init+0x10/0xe0 ret_from_fork+0x10/0x50 This patch fixes the problem by initialising the pgd_cache earlier, in the pgtable_cache_init callback, which sounds suspiciously like what it was intended for. Reported-by: Dennis Chen <dennis.chen@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-05cgroup: Remove resource_counter.txt in Documentation/cgroup-legacy/00-INDEX.Yuan Sun
Signed-off-by: Yuan Sun <sunyuan3@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-05tile: provide CONFIG_PAGE_SIZE_64KB etc for tileproChris Metcalf
This allows the build system to know that it can't attempt to configure the Lustre virtual block device, for example, when tilepro is using 64KB pages (as it does by default). The tilegx build already provided those symbols. Previously we required that the tilepro hypervisor be rebuilt with a different hardcoded page size in its headers, and then Linux be rebuilt using the updated hypervisor header. Now we allow each of the hypervisor and Linux to be built independently. We still check at boot time to ensure that the page size provided by the hypervisor matches what Linux expects. Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com> Cc: stable@vger.kernel.org [3.19+]
2016-01-05pinctrl: lantiq: 2 pins have the wrong mux listJohn Crispin
The latest vendor SDK contained this patch. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05Documentation: cpufreq: intel_pstate: enhance documentationSrinivas Pandruvada
This is an attempt to make documentation more user friendly. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Doug Smythies <dsmythies@telus.net> Reviewed-by: Chen, Yu C <yu.c.chen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-05ACPI, PCI, irq: remove redundant check for null string pointerColin Ian King
source is decleared as a 4 byte char array in struct acpi_pci_routing_table so !prt->source is a redundant null string pointer check. Detected with smatch: drivers/acpi/pci_irq.c:134 do_prt_fixups() warn: this array is probably non-NULL. 'prt->source' Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-05ACPI / video: driver must be registered before checking for keypressesAdrien Schildknecht
acpi_video_handles_brightness_key_presses() may use an uninitialized mutex. The error has been reported by lockdep: DEBUG_LOCKS_WARN_ON(l->magic != l). The function assumes that the video driver has been registered before being called. As explained in the comment of acpi_video_init(), the registration of the video class may be defered and thus may not take place in the init function of the module. Use completion mechanisms to make sure that acpi_video_handles_brightness_key_presses() wait for the completion of acpi_video_register() before using the mutex. Also get rid of register_count since task completion can replace it. Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-05ASoC: Intel: Skylake: Fix the memory leakVinod Koul
This provide the fix for firmware memory by freeing the pointer in driver remove where it is safe to do so Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-05ASoC: Intel: Skylake: Revert previous broken fix memory leak fixVinod Koul
This reverts commit 87b5ed8ecb9fe05a696e1c0b53c7a49ea66432c1 ("ASoC: Intel: Skylake: fix memory leak") as it causes regression on Skylake devices The SKL drivers can be deferred probe. The topology file based widgets can have references to topology file so this can't be freed until card is fully created, so revert this patch for now [ 66.682767] BUG: unable to handle kernel paging request at ffffc900001363fc [ 66.690735] IP: [<ffffffff806c94dd>] strnlen+0xd/0x40 [ 66.696509] PGD 16e035067 PUD 16e036067 PMD 16e038067 PTE 0 [ 66.702925] Oops: 0000 [#1] PREEMPT SMP [ 66.768390] CPU: 3 PID: 57 Comm: kworker/u16:3 Tainted: G O 4.4.0-rc7-skl #62 [ 66.778869] Hardware name: Intel Corporation Skylake Client platform [ 66.793201] Workqueue: deferwq deferred_probe_work_func [ 66.799173] task: ffff88008b700f40 ti: ffff88008b704000 task.ti: ffff88008b704000 [ 66.807692] RIP: 0010:[<ffffffff806c94dd>] [<ffffffff806c94dd>] strnlen+0xd/0x40 [ 66.816243] RSP: 0018:ffff88008b707878 EFLAGS: 00010286 [ 66.822293] RAX: ffffffff80e60a82 RBX: 000000000000000e RCX: fffffffffffffffe [ 66.830406] RDX: ffffc900001363fc RSI: ffffffffffffffff RDI: ffffc900001363fc [ 66.838520] RBP: ffff88008b707878 R08: 000000000000ffff R09: 000000000000ffff [ 66.846649] R10: 0000000000000001 R11: ffffffffa01c6368 R12: ffffc900001363fc [ 66.854765] R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 [ 66.862910] FS: 0000000000000000(0000) GS:ffff88016ecc0000(0000) knlGS:0000000000000000 [ 66.872150] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 66.878696] CR2: ffffc900001363fc CR3: 0000000002c09000 CR4: 00000000003406e0 [ 66.886820] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 66.894938] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 66.903052] Stack: [ 66.905346] ffff88008b7078b0 ffffffff806cb1db 000000000000000e 0000000000000000 [ 66.913854] ffff88008b707928 ffffffffa00d1050 ffffffffa00d104e ffff88008b707918 [ 66.922353] ffffffff806ccbd6 ffff88008b707948 0000000000000046 ffff88008b707940 [ 66.930855] Call Trace: [ 66.933646] [<ffffffff806cb1db>] string.isra.4+0x3b/0xd0 [ 66.939793] [<ffffffff806ccbd6>] vsnprintf+0x116/0x540 [ 66.945742] [<ffffffff806d02f0>] kvasprintf+0x40/0x80 [ 66.951591] [<ffffffff806d0370>] kasprintf+0x40/0x50 [ 66.957359] [<ffffffffa00c085f>] dapm_create_or_share_kcontrol+0x1cf/0x300 [snd_soc_core] [ 66.966771] [<ffffffff8057dd1e>] ? __kmalloc+0x16e/0x2a0 [ 66.972931] [<ffffffffa00c0dab>] snd_soc_dapm_new_widgets+0x41b/0x4b0 [snd_soc_core] [ 66.981857] [<ffffffffa00be8c0>] ? snd_soc_dapm_add_routes+0xb0/0xd0 [snd_soc_core] [ 67.007828] [<ffffffffa00b92ed>] soc_probe_component+0x23d/0x360 [snd_soc_core] [ 67.016244] [<ffffffff80b14e69>] ? mutex_unlock+0x9/0x10 [ 67.022405] [<ffffffffa00ba02f>] snd_soc_instantiate_card+0x47f/0xd10 [snd_soc_core] [ 67.031329] [<ffffffff8049eeb2>] ? debug_mutex_init+0x32/0x40 [ 67.037973] [<ffffffffa00baa92>] snd_soc_register_card+0x1d2/0x2b0 [snd_soc_core] [ 67.046619] [<ffffffffa00c8b54>] devm_snd_soc_register_card+0x44/0x80 [snd_soc_core] [ 67.055539] [<ffffffffa01c303b>] skylake_audio_probe+0x1b/0x20 [snd_soc_skl_rt286] [ 67.064292] [<ffffffff808aa887>] platform_drv_probe+0x37/0x90 Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-05arm64: module: avoid undefined shift behavior in reloc_data()Ard Biesheuvel
Compilers may engage the improbability drive when encountering shifts by a distance that is a multiple of the size of the operand type. Since the required bounds check is very simple here, we can get rid of all the fuzzy masking, shifting and comparing, and use the documented bounds directly. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-05arm64: module: fix relocation of movz instruction with negative immediateArd Biesheuvel
The test whether a movz instruction with a signed immediate should be turned into a movn instruction (i.e., when the immediate is negative) is flawed, since the value of imm is always positive. Also, the subsequent bounds check is incorrect since the limit update never executes, due to the fact that the imm_type comparison will always be false for negative signed immediates. Let's fix this by performing the sign test on sval directly, and replacing the bounds check with a simple comparison against U16_MAX. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [will: tidied up use of sval, renamed MOVK enum value to MOVKZ] Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-05Merge branches 'misc' and 'misc-rc6' into for-linusRussell King
2016-01-05configfs: add myself as co-maintainer, updated git treeChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2016-01-05x86/mm/pat: Change free_memtype() to support shrinking caseToshi Kani
Using mremap() to shrink the map size of a VM_PFNMAP range causes the following error message, and leaves the pfn range allocated. x86/PAT: test:3493 freeing invalid memtype [mem 0x483200000-0x4863fffff] This is because rbt_memtype_erase(), called from free_memtype() with spin_lock held, only supports to free a whole memtype node in memtype_rbroot. Therefore, this patch changes rbt_memtype_erase() to support a request that shrinks the size of a memtype node for mremap(). memtype_rb_exact_match() is renamed to memtype_rb_match(), and is enhanced to support EXACT_MATCH and END_MATCH in @match_type. Since the memtype_rbroot tree allows overlapping ranges, rbt_memtype_erase() checks with EXACT_MATCH first, i.e. free a whole node for the munmap case. If no such entry is found, it then checks with END_MATCH, i.e. shrink the size of a node from the end for the mremap case. On the mremap case, rbt_memtype_erase() proceeds in two steps, 1) remove the node, and then 2) insert the updated node. This allows proper update of augmented values, subtree_max_end, in the tree. Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: stsp@list.ru Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1450832064-10093-3-git-send-email-toshi.kani@hpe.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-05x86/mm/pat: Add untrack_pfn_moved for mremapToshi Kani
mremap() with MREMAP_FIXED on a VM_PFNMAP range causes the following WARN_ON_ONCE() message in untrack_pfn(). WARNING: CPU: 1 PID: 3493 at arch/x86/mm/pat.c:985 untrack_pfn+0xbd/0xd0() Call Trace: [<ffffffff817729ea>] dump_stack+0x45/0x57 [<ffffffff8109e4b6>] warn_slowpath_common+0x86/0xc0 [<ffffffff8109e5ea>] warn_slowpath_null+0x1a/0x20 [<ffffffff8106a88d>] untrack_pfn+0xbd/0xd0 [<ffffffff811d2d5e>] unmap_single_vma+0x80e/0x860 [<ffffffff811d3725>] unmap_vmas+0x55/0xb0 [<ffffffff811d916c>] unmap_region+0xac/0x120 [<ffffffff811db86a>] do_munmap+0x28a/0x460 [<ffffffff811dec33>] move_vma+0x1b3/0x2e0 [<ffffffff811df113>] SyS_mremap+0x3b3/0x510 [<ffffffff817793ee>] entry_SYSCALL_64_fastpath+0x12/0x71 MREMAP_FIXED moves a pfnmap from old vma to new vma. untrack_pfn() is called with the old vma after its pfnmap page table has been removed, which causes follow_phys() to fail. The new vma has a new pfnmap to the same pfn & cache type with VM_PAT set. Therefore, we only need to clear VM_PAT from the old vma in this case. Add untrack_pfn_moved(), which clears VM_PAT from a given old vma. move_vma() is changed to call this function with the old vma when VM_PFNMAP is set. move_vma() then calls do_munmap(), and untrack_pfn() is a no-op since VM_PAT is cleared. Reported-by: Stas Sergeev <stsp@list.ru> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1450832064-10093-2-git-send-email-toshi.kani@hpe.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-04af_unix: Fix splice-bind deadlockRainer Weikusat
On 2015/11/06, Dmitry Vyukov reported a deadlock involving the splice system call and AF_UNIX sockets, http://lists.openwall.net/netdev/2015/11/06/24 The situation was analyzed as (a while ago) A: socketpair() B: splice() from a pipe to /mnt/regular_file does sb_start_write() on /mnt C: try to freeze /mnt wait for B to finish with /mnt A: bind() try to bind our socket to /mnt/new_socket_name lock our socket, see it not bound yet decide that it needs to create something in /mnt try to do sb_start_write() on /mnt, block (it's waiting for C). D: splice() from the same pipe to our socket lock the pipe, see that socket is connected try to lock the socket, block waiting for A B: get around to actually feeding a chunk from pipe to file, try to lock the pipe. Deadlock. on 2015/11/10 by Al Viro, http://lists.openwall.net/netdev/2015/11/10/4 The patch fixes this by removing the kern_path_create related code from unix_mknod and executing it as part of unix_bind prior acquiring the readlock of the socket in question. This means that A (as used above) will sb_start_write on /mnt before it acquires the readlock, hence, it won't indirectly block B which first did a sb_start_write and then waited for a thread trying to acquire the readlock. Consequently, A being blocked by C waiting for B won't cause a deadlock anymore (effectively, both A and B acquire two locks in opposite order in the situation described above). Dmitry Vyukov(<dvyukov@google.com>) tested the original patch. Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04net: Propagate lookup failure in l3mdev_get_saddr to callerDavid Ahern
Commands run in a vrf context are not failing as expected on a route lookup: root@kenny:~# ip ro ls table vrf-red unreachable default root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254 ping: Warning: source address might be selected on device other than vrf-red. PING 10.100.1.254 (10.100.1.254) from 0.0.0.0 vrf-red: 56(84) bytes of data. --- 10.100.1.254 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 999ms Since the vrf table does not have a route for 10.100.1.254 the ping should have failed. The saddr lookup causes a full VRF table lookup. Propogating a lookup failure to the user allows the command to fail as expected: root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254 connect: No route to host Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04Merge branch 'faster-soreuseport'David S. Miller
Craig Gallek says: ==================== Faster SO_REUSEPORT This series contains two optimizations for the SO_REUSEPORT feature: Faster lookup when selecting a socket for an incoming packet and the ability to select the socket from the group using a BPF program. This series only includes the UDP path. I plan to submit a follow-up including the TCP path if the implementation in this series is acceptable. Changes in v4: - pskb_may_pull is unnecessary with pskb_pull (per Alexei Starovoitov) Changes in v3: - skb_pull_inline -> pskb_pull (per Alexei Starovoitov) - reuseport_attach* -> sk_reuseport_attach* and simple return statement syntax change (per Daniel Borkmann) Changes in v2: - Fix ARM build; remove unnecessary include. - Handle case where protocol header is not in linear section (per Alexei Starovoitov). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04soreuseport: BPF selection functional testCraig Gallek
This program will build classic and extended BPF programs and validate the socket selection logic when used with SO_ATTACH_REUSEPORT_CBPF and SO_ATTACH_REUSEPORT_EBPF. It also validates the re-programing flow and several edge cases. Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPFCraig Gallek
Expose socket options for setting a classic or extended BPF program for use when selecting sockets in an SO_REUSEPORT group. These options can be used on the first socket to belong to a group before bind or on any socket in the group after bind. This change includes refactoring of the existing sk_filter code to allow reuse of the existing BPF filter validation checks. Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04soreuseport: fast reuseport UDP socket selectionCraig Gallek
Include a struct sock_reuseport instance when a UDP socket binds to a specific address for the first time with the reuseport flag set. When selecting a socket for an incoming UDP packet, use the information available in sock_reuseport if present. This required adding an additional field to the UDP source address equality function to differentiate between exact and wildcard matches. The original use case allowed wildcard matches when checking for existing port uses during bind. The new use case of adding a socket to a reuseport group requires exact address matching. Performance test (using a machine with 2 CPU sockets and a total of 48 cores): Create reuseport groups of varying size. Use one socket from this group per user thread (pinning each thread to a different core) calling recvmmsg in a tight loop. Record number of messages received per second while saturating a 10G link. 10 sockets: 18% increase (~2.8M -> 3.3M pkts/s) 20 sockets: 14% increase (~2.9M -> 3.3M pkts/s) 40 sockets: 13% increase (~3.0M -> 3.4M pkts/s) This work is based off a similar implementation written by Ying Cai <ycai@google.com> for implementing policy-based reuseport selection. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04soreuseport: define reuseport groupsCraig Gallek
struct sock_reuseport is an optional shared structure referenced by each socket belonging to a reuseport group. When a socket is bound to an address/port not yet in use and the reuseport flag has been set, the structure will be allocated and attached to the newly bound socket. When subsequent calls to bind are made for the same address/port, the shared structure will be updated to include the new socket and the newly bound socket will reference the group structure. Usually, when an incoming packet was destined for a reuseport group, all sockets in the same group needed to be considered before a dispatching decision was made. With this structure, an appropriate socket can be found after looking up just one socket in the group. This shared structure will also allow for more complicated decisions to be made when selecting a socket (eg a BPF filter). This work is based off a similar implementation written by Ying Cai <ycai@google.com> for implementing policy-based reuseport selection. Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04Merge branch 'mlxsw-fixes'David S. Miller
Jiri Pirko says: ==================== mlxsw: couple of fixes Couple of fixes from Ido. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04mlxsw: spectrum: Change bridge port attributes only when bridgedIdo Schimmel
Bridge port attributes are offloaded to hardware when invoked with SELF flag set, but it really makes no sense to reflect them when port is not bridged. Allow a user to change these attribute only when port is bridged and initialize them correctly when joining or leaving a bridge. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04mlxsw: spectrum: Set bridge status in appropriate functionsIdo Schimmel
Set the bridge status of physical ports in the appropriate functions, to be consistent with LAG join/leave and vPorts joining/leaving bridge. Also, remove the error messages in these two functions, as we already emit errors in both the single functions they call. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04mlxsw: spectrum: Return NOTIFY_BAD on bridge failureIdo Schimmel
It is possible for us to fail when joining or leaving a bridge, so let the user know about that by returning NOTIFY_BAD, as already done for LAG join/leave and 802.1D bridges. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04mlxsw: spectrum: Initialize PVID only onceIdo Schimmel
We set PVID to 1 in mlxsw_sp_port_vlan_init(), so we can remove this statement. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04r8152: add reset_resume functionhayeswang
When the reset_resume() is called, the flag of SELECTIVE_SUSPEND should be cleared and reinitialize the device, whether the SELECTIVE_SUSPEND is set or not. If reset_resume() is called, it means the power supply is cut or the device is reset. That is, the device wouldn't be in runtime suspend state and the reinitialization is necessary. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04chelsio: constify cphy_ops structuresJulia Lawall
The cphy_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04fsl/fman: allow modular buildArnd Bergmann
ARM allmodconfig fails because of the addition of the FMAN driver: drivers/built-in.o: In function `dtsec_restart_autoneg': binder.c:(.text+0x173328): undefined reference to `mdiobus_read' binder.c:(.text+0x173348): undefined reference to `mdiobus_write' drivers/built-in.o: In function `dtsec_config': binder.c:(.text+0x173d24): undefined reference to `of_phy_find_device' drivers/built-in.o: In function `init_phy': binder.c:(.text+0x1763b0): undefined reference to `of_phy_connect' drivers/built-in.o: In function `stop': binder.c:(.text+0x176014): undefined reference to `phy_stop' drivers/built-in.o: In function `start': binder.c:(.text+0x176078): undefined reference to `phy_start' The reason is that the driver uses PHYLIB, but that is a loadable module here, and fman itself is built-in. This patch makes it possible to configure fman as a module as well so we don't change the status of PHYLIB in an allmodconfig kernel, and it adds a 'select PHYLIB' statement to ensure that phylib is always built-in when fman is. The driver uses "builtin_platform_driver(fman_driver);", which means it cannot be unloaded, but it's still possible to have it as a loadable module that gets loaded once and never removed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 5adae51a64b8 ("fsl/fman: Add FMan MURAM support") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04net: make ip6tunnel_xmit definition conditionalArnd Bergmann
Moving the caller of iptunnel_xmit_stats causes a build error in randconfig builds that disable CONFIG_INET: In file included from ../net/xfrm/xfrm_input.c:17:0: ../include/net/ip6_tunnel.h: In function 'ip6tunnel_xmit': ../include/net/ip6_tunnel.h:93:2: error: implicit declaration of function 'iptunnel_xmit_stats' [-Werror=implicit-function-declaration] iptunnel_xmit_stats(dev, pkt_len); The reason is that the iptunnel_xmit_stats definition is hidden inside #ifdef CONFIG_INET but the caller is not. We can change one or the other to fix it, and this patch adds a second #ifdef around ip6tunnel_xmit() to avoid seeing the invalid call. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()") Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04Merge tag 'nfc-next-4.5-1' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz says: ==================== NFC 4.5 pull request This is the first NFC pull request for 4.5 and it brings: - A new driver for the STMicroelectronics ST95HF NFC chipset. The ST95HF is an NFC digital transceiver with an embedded analog front-end and as such relies on the Linux NFC digital implementation. This is the 3rd user of the NFC digital stack. - ACPI support for the ST st-nci and st21nfca drivers. - A small improvement for the nfcsim driver, as we can now tune the Rx delay through sysfs. - A bunch of minor cleanups and small fixes from Christophe Ricard, for a few drivers and the NFC core code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04connector: bump skb->users before callback invocationFlorian Westphal
Dmitry reports memleak with syskaller program. Problem is that connector bumps skb usecount but might not invoke callback. So move skb_get to where we invoke the callback. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05cpufreq-dt: fix handling regulator_get_voltage() resultAndrzej Hajda
The function can return negative values so it should be assigned to signed type. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci. Link: http://permalink.gmane.org/gmane.linux.kernel/2038576 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-05cpufreq: governor: Fix negative idle_time when configured with ↵Chen Yu
CONFIG_HZ_PERIODIC It is reported that, with CONFIG_HZ_PERIODIC=y cpu stays at the lowest frequency even if the usage goes to 100%, neither ondemand nor conservative governor works, however performance and userspace work as expected. If set with CONFIG_NO_HZ_FULL=y, everything goes well. This problem is caused by improper calculation of the idle_time when the load is extremely high(near 100%). Firstly, cpufreq_governor uses get_cpu_idle_time to get the total idle time for specific cpu, then: 1.If the system is configured with CONFIG_NO_HZ_FULL, the idle time is returned by ktime_get, which is always increasing, it's OK. 2.However, if the system is configured with CONFIG_HZ_PERIODIC, get_cpu_idle_time might not guarantee to be always increasing, because it will leverage get_cpu_idle_time_jiffy to calculate the idle_time, consider the following scenario: At T1: idle_tick_1 = total_tick_1 - user_tick_1 sample period(80ms)... At T2: ( T2 = T1 + 80ms): idle_tick_2 = total_tick_2 - user_tick_2 Currently the algorithm is using (idle_tick_2 - idle_tick_1) to get the delta idle_time during the past sample period, however it CAN NOT guarantee that idle_tick_2 >= idle_tick_1, especially when cpu load is high. (Yes, total_tick_2 >= total_tick_1, and user_tick_2 >= user_tick_1, but how about idle_tick_2 and idle_tick_1? No guarantee.) So governor might get a negative value of idle_time during the past sample period, which might mislead the system that the idle time is very big(converted to unsigned int), and the busy time is nearly zero, which causes the governor to always choose the lowest cpufreq, then cause this problem. In theory there are two solutions: 1.The logic should not rely on the idle tick during every sample period, but be based on the busy tick directly, as this is how 'top' is implemented. 2.Or the logic must make sure that the idle_time is strictly increasing during each sample period, then there would be no negative idle_time anymore. This solution requires minimum modification to current code and this patch uses method 2. Link: https://bugzilla.kernel.org/show_bug.cgi?id=69821 Reported-by: Jan Fikar <j.fikar@gmail.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-04x86: ftrace: Fix the comments for ftrace_modify_code_direct()Li Bin
There is no need to worry about module and __init text disappearing case, because that ftrace has a module notifier that is called when a module is being unloaded and before the text goes away and this code grabs the ftrace_lock mutex and removes the module functions from the ftrace list, such that it will no longer do any modifications to that module's text, the update to make functions be traced or not is done under the ftrace_lock mutex as well. And by now, __init section codes should not been modified by ftrace, because it is black listed in recordmcount.c and ignored by ftrace. Link: http://lkml.kernel.org/r/1449367378-29430-6-git-send-email-huawei.libin@huawei.com Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Li Bin <huawei.libin@huawei.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-01-04udp: properly support MSG_PEEK with truncated buffersEric Dumazet
Backport of this upstream commit into stable kernels : 89c22d8c3b27 ("net: Fix skb csum races when peeking") exposed a bug in udp stack vs MSG_PEEK support, when user provides a buffer smaller than skb payload. In this case, skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr), msg->msg_iov); returns -EFAULT. This bug does not happen in upstream kernels since Al Viro did a great job to replace this into : skb_copy_and_csum_datagram_msg(skb, sizeof(struct udphdr), msg); This variant is safe vs short buffers. For the time being, instead reverting Herbert Xu patch and add back skb->ip_summed invalid changes, simply store the result of udp_lib_checksum_complete() so that we avoid computing the checksum a second time, and avoid the problematic skb_copy_and_csum_datagram_iovec() call. This patch can be applied on recent kernels as it avoids a double checksumming, then backported to stable kernels as a bug fix. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04cxgb4: correctly handling failed allocationInsu Yun
Since t4_alloc_mem can be failed in memory pressure, if not properly handled, NULL dereference could be happened. Signed-off-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04qlcnic: correctly handle qlcnic_alloc_mbx_argsInsu Yun
Since qlcnic_alloc_mbx_args can be failed, return value should be checked. Signed-off-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05drm/nouveau/gr/nv40: fix oops in interrupt handlerBen Skeggs
fdo#93557 Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2016-01-04Merge branch 'r8169-hw-programming-typo-fixes'David S. Miller
Chunhao Lin says: ==================== Fix some typos in setting hardware parameter The typos are in setting RTL8168DP, RTL8168EP and RTL8168H hardware parameters. This series of patch fix these typos. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04r8169:Correct the way of setting RTL8168DP ephyChun-Hao Lin
The original way is wrong, it always writes ephy reg 0x03. Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04r8169:Fix typo in setting RTL8168H PHY PFM mode.Chun-Hao Lin
The PHY PFM register is in PHY page 0x0a44 register 0x11, not 0x14. Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04r8169:Fix typo in setting RTL8168EP and RTL8168H D3cold PFM modeChun-Hao Lin
The register for setting D3code PFM mode is MISC_1, not DLLPR. Signed-off-by: Chunhao Lin <hau@realtek.com> Reviewed-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04l2tp: rely on ppp layer for skb scrubbingGuillaume Nault
Since 79c441ae505c ("ppp: implement x-netns support"), the PPP layer calls skb_scrub_packet() whenever the skb is received on the PPP device. Manually resetting packet meta-data in the L2TP layer is thus redundant. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04PM / sleep: Add support for read-only sysfs attributesRafael J. Wysocki
Some sysfs attributes in /sys/power/ should really be read-only, so add support for that, convert those attributes to read-only and drop the stub .show() routines from them. Original-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-04ACPI: Fix white space in a structure definitionLukas Wunner
Add a missing space in the definition of struct acpi_device_bus_id. Signed-off-by: Lukas Wunner <lukas@wunner.de> [ rjw: Subject and changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-09-13 11:14:17 +0000